ARK FPV Flight Controller

:::warning PX4 не розробляє цей (або будь-який інший) автопілот. Contact the manufacturer for hardware support or compliance issues. :::

The USA-built ARK FPV flight controller is based on the ARKV6X in a 30.5mm standard mounting pattern, supporting a 3-12s battery input with a regulated 12V 2A output for video transmitters and payloads.

:::info This flight controller is manufacturer supported. :::

Де купити

Order from Ark Electronics (US)

Документація

See the documentation Ark Electronics GitBook

Датчики

Мікропроцесор

STM32H743IIK6 MCU
- 480 MHz
- 2 MB Flash
- 1 МБ RAM

З’єднання

USB C
- VBUS In, USB
PWM
- VBAT In, Analog Current Input, Telem RX, 4x PWM
- JST-GH 8 Pin
PWM EXTRA
- 5x PWM
- JST-SH 6 Pin
RC INPUT
- 5V Out, UART
- JST-GH 4 Pin
POWER AUX
- 12V Out, VBAT In/Out
- JST-GH 3 Pin
TELEM
- 5V Out, UART with flow control
- JST-GH 6 Pin
GPS
- 5V Out, UART, I2C
- JST-GH 6 Pin
CAN
- 5V Out, CAN
- JST-GH 4 Pin
VTX
- 12V Out, UART TX/RX, UART RX
- JST-GH 6 Pin
SPI (OSD or External IMU)
- 5V Out, SPI
- JST-SH 8 Pin
DEBUG
- 3.3V Out, UART, SWD
- JST-SH 6 Pin

Вимоги до живлення

5.5V - 54V
500 mA (300 mA main system, 200 mA heater)

Додаткова інформація

Weight: 7.5 g g with MicroSD card
Dimensions: 3.6 x 3.6 x 0.8 cm
USA Built - NDAA compliant
Heater: 1W for warming sensors in extreme cold
LED індикатори
Слот MicroSD

Схема розташування виводів

See the DS-10 Pixhawk Autopilot Bus Standard

2.5 KiB Raw Blame History Unescape Escape