Files
PX4-Autopilot/msg/ControlAllocatorStatus.msg
Matthias Grob e59afce5db Enable directly injecting motor failures using e.g. failure motor off -i 1
Only if SYS_FAILURE_EN is enabled and CA_FAILURE_MODE is > 0.
2025-09-30 11:23:09 +02:00

23 lines
2.1 KiB
Plaintext

uint64 timestamp # time since system start (microseconds)
bool torque_setpoint_achieved # Boolean indicating whether the 3D torque setpoint was correctly allocated to actuators. 0 if not achieved, 1 if achieved.
float32[3] unallocated_torque # Unallocated torque. Equal to 0 if the setpoint was achieved.
# Computed as: unallocated_torque = torque_setpoint - allocated_torque
bool thrust_setpoint_achieved # Boolean indicating whether the 3D thrust setpoint was correctly allocated to actuators. 0 if not achieved, 1 if achieved.
float32[3] unallocated_thrust # Unallocated thrust. Equal to 0 if the setpoint was achieved.
# Computed as: unallocated_thrust = thrust_setpoint - allocated_thrust
int8 ACTUATOR_SATURATION_OK = 0 # The actuator is not saturated
int8 ACTUATOR_SATURATION_UPPER_DYN = 1 # The actuator is saturated (with a value <= the desired value) because it cannot increase its value faster
int8 ACTUATOR_SATURATION_UPPER = 2 # The actuator is saturated (with a value <= the desired value) because it has reached its maximum value
int8 ACTUATOR_SATURATION_LOWER_DYN = -1 # The actuator is saturated (with a value >= the desired value) because it cannot decrease its value faster
int8 ACTUATOR_SATURATION_LOWER = -2 # The actuator is saturated (with a value >= the desired value) because it has reached its minimum value
int8[16] actuator_saturation # Indicates actuator saturation status.
# Note 1: actuator saturation does not necessarily imply that the thrust setpoint or the torque setpoint were not achieved.
# Note 2: an actuator with limited dynamics can be indicated as upper-saturated even if it as not reached its maximum value.
uint16 handled_motor_failure_mask # Bitmask of failed motors that were removed from the allocation / effectiveness matrix. Not necessarily identical to the report from FailureDetector
uint16 motor_stop_mask # Bitmaks of motors stopped by failure injection