PX4-Autopilot/docs/zh/smart_batteries/rotoye_batmon.md

补充信息

Rotoye Batmon is a kit for adding smart battery functionality to off-the-shelf Lithium-Ion and LiPo batteries. It can be purchased as a standalone unit or as part of a factory-assembled smart-battery.

购买渠道

Rotoye Store: Batmon kits, custom smart-batteries, and accessories

Wiring/Connections

Rotoye 电池监测系统系统采用带有 I2C 引脚的 XT - 90 电池连接器，以及一块光隔离板来传输数据。

更多详细信息在这里可以找到

软件设置

Build PX4 Firmware

1. 克隆或下载 Rotoye的 PX4 分支：

   git clone https://github.com/rotoye/PX4-Autopilot.git
   cd PX4-Autopilot
   

2. Checkout the batmon_4.03 branch

   git fetch origin batmon_4.03
   git checkout batmon_4.03
   

3. Build and upload the firmware for your target board

Configure Parameters

In QGroundControl:

1. Set the following parameters:
   • BATx_SOURCE to External,
   • SENS_EN_BAT to true,
   • BAT_SMBUS_MODEL to 3:Rotoye
2. Open the MAVLink Console
3. Start the batt_smbus driver in the console. For example, to run two BatMons on the same bus:

   batt_smbus start -X -b 1 -a 11 # External bus 1, address 0x0b
   batt_smbus start -X -b 1 -a 12 # External bus 1, address 0x0c