board_common.h: move under platforms/common

Also move board_determine_hw_info and board_gpio_init under platforms/nuttx

boards/aerotenna/ocpoc/src/board_config.h

@@ -57,4 +57,4 @@
 #define ADC_AIRSPEED_VOLTAGE_CHANNEL    11
 
 #include <system_config.h>
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>

boards/airmind/mindpx-v2/src/board_config.h

@@ -346,7 +346,7 @@ extern void stm32_usbinitialize(void);
 #define board_peripheral_reset(ms)
 
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/atlflight/eagle/src/board_config.h

@@ -57,4 +57,4 @@
 #define PX4_NUMBER_I2C_BUSES 3
 
 #include <system_config.h>
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>

boards/auav/esc35-v1/src/board_config.h

@@ -266,7 +266,7 @@ int usbmsc_archinitialize(void);
 extern int composite_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/auav/x21/src/board_config.h

@@ -270,7 +270,7 @@ extern void stm32_usbinitialize(void);
 
 extern void stm32_spiinitialize(void);
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 __END_DECLS

boards/av/x-v1/src/board_config.h

@@ -388,7 +388,7 @@ void board_spi_reset(int ms);
 int nsh_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/av/x-v1/src/init.c

@@ -71,6 +71,7 @@
 #include <systemlib/px4_macros.h>
 #include <px4_platform_common/init.h>
 #include <px4_platform_common/i2c.h>
+#include <px4_platform/gpio.h>
 #include <drivers/boards/common/board_dma_alloc.h>
 
 static int configure_switch(void);
@@ -91,7 +92,7 @@ __EXPORT void board_on_reset(int status)
 	/* configure the GPIO pins to outputs and keep them low */
 
 	const uint32_t gpio[] = PX4_GPIO_PWM_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	if (status >= 0) {
 		up_mdelay(6);
@@ -118,7 +119,7 @@ stm32_boardinitialize(void)
 
 	/* configure pins */
 	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	/* configure SPI interfaces */
 	stm32_spiinitialize();

boards/beaglebone/blue/src/board_config.h

@@ -64,7 +64,7 @@
 #define PX4_NUMBER_I2C_BUSES    1
 
 #include <system_config.h>
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #ifdef  __cplusplus
 extern "C" {

boards/bitcraze/crazyflie/src/board_config.h

@@ -283,7 +283,7 @@ extern int stm32_spi_bus_initialize(void);
 void board_spi_reset(int ms);
 
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/bitcraze/crazyflie/src/spi.c

@@ -3,6 +3,7 @@
  ************************************************************************************/
 
 #include <px4_platform_common/px4_config.h>
+#include <px4_platform/gpio.h>
 
 #include <stdint.h>
 #include <stdbool.h>
@@ -46,7 +47,7 @@ static const uint32_t spi1selects_gpio[] = PX4_FLOW_BUS_CS_GPIO;
 __EXPORT void stm32_spiinitialize(void)
 {
 #ifdef CONFIG_STM32_SPI1
-	board_gpio_init(spi1selects_gpio, arraySize(spi1selects_gpio));
+	px4_gpio_init(spi1selects_gpio, arraySize(spi1selects_gpio));
 #endif
 
 }

boards/emlid/navio2/src/board_config.h

@@ -60,4 +60,4 @@
 #define PX4_NUMBER_I2C_BUSES 1
 
 #include <system_config.h>
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>

boards/holybro/kakutef7/src/board_config.h

@@ -270,7 +270,7 @@ extern void board_peripheral_reset(int ms);
 int nsh_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/holybro/kakutef7/src/init.c

@@ -68,6 +68,8 @@
 #include <drivers/drv_board_led.h>
 #include <systemlib/px4_macros.h>
 #include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+#include <px4_platform/gpio.h>
 #include <drivers/boards/common/board_dma_alloc.h>
 
 # if defined(FLASH_BASED_PARAMS)
@@ -120,7 +122,7 @@ __EXPORT void board_on_reset(int status)
 	/* configure the GPIO pins to outputs and keep them low */
 
 	const uint32_t gpio[] = PX4_GPIO_PWM_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	if (status >= 0) {
 		up_mdelay(6);
@@ -149,7 +151,7 @@ stm32_boardinitialize(void)
 	/* configure pins */
 
 	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	/* configure SPI interfaces */
 

boards/intel/aerofc-v1/src/board_config.h

@@ -180,7 +180,7 @@ extern void stm32_spiinitialize(void);
 
 extern int board_sdio_initialize(void);
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/modalai/fc-v1/src/CMakeLists.txt

@@ -41,9 +41,11 @@ add_library(drivers_board
 	timer_config.c
 	usb.c
 )
+add_dependencies(drivers_board arch_board_hw_info)
 
 target_link_libraries(drivers_board
 	PRIVATE
+		arch_board_hw_info
 		drivers__led # drv_led_start
 		nuttx_arch # sdio
 		nuttx_drivers # sdio

boards/modalai/fc-v1/src/board_config.h

@@ -544,7 +544,7 @@ extern void board_peripheral_reset(int ms);
 int nsh_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/modalai/fc-v1/src/init.c

@@ -70,6 +70,8 @@
 #include <drivers/drv_board_led.h>
 #include <systemlib/px4_macros.h>
 #include <px4_platform_common/init.h>
+#include <px4_platform/board_determine_hw_info.h>
+#include <px4_platform/gpio.h>
 #include <drivers/boards/common/board_dma_alloc.h>
 
 /****************************************************************************
@@ -182,7 +184,7 @@ __EXPORT void board_on_reset(int status)
 	/* configure the GPIO pins to outputs and keep them low */
 
 	const uint32_t gpio[] = PX4_GPIO_PWM_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	if (status >= 0) {
 		up_mdelay(6);
@@ -236,7 +238,7 @@ stm32_boardinitialize(void)
 	/* configure pins */
 
 	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	/* configure SPI interfaces */
 

boards/mro/ctrl-zero-f7/src/board_config.h

@@ -392,7 +392,7 @@ extern void board_peripheral_reset(int ms);
 int nsh_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/mro/ctrl-zero-f7/src/init.c

@@ -69,6 +69,7 @@
 #include <drivers/drv_board_led.h>
 #include <systemlib/px4_macros.h>
 #include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
 #include <drivers/boards/common/board_dma_alloc.h>
 
 /****************************************************************************
@@ -132,7 +133,7 @@ __EXPORT void board_on_reset(int status)
 	/* configure the GPIO pins to outputs and keep them low */
 
 	const uint32_t gpio[] = PX4_GPIO_PWM_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	if (status >= 0) {
 		up_mdelay(6);
@@ -159,7 +160,7 @@ stm32_boardinitialize(void)
 
 	/* configure pins */
 	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	/* configure SPI interfaces */
 	stm32_spiinitialize();

boards/nxp/fmuk66-v3/src/board_config.h

@@ -664,7 +664,7 @@ void fmuk66_automount_event(bool inserted);
 
 void fmuk66_timer_initialize(void);
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/nxp/fmuk66-v3/src/init.c

@@ -46,6 +46,7 @@
  ****************************************************************************/
 
 #include <px4_platform_common/px4_config.h>
+#include <px4_platform/gpio.h>
 
 #include <stdbool.h>
 #include <stdio.h>
@@ -116,7 +117,7 @@ void board_on_reset(int status)
 	/* configure the GPIO pins to outputs and keep them low */
 
 	const uint32_t gpio[] = PX4_GPIO_PWM_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	if (status >= 0) {
 		up_mdelay(6);
@@ -178,7 +179,7 @@ kinetis_boardinitialize(void)
 	board_autoled_initialize();
 
 	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	fmuk66_timer_initialize();
 

boards/omnibus/f4sd/src/board_config.h

@@ -313,7 +313,7 @@ extern void stm32_usbinitialize(void);
 
 extern void board_peripheral_reset(int ms);
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/parrot/bebop/src/board_config.h

@@ -54,4 +54,4 @@
 #define PX4_NUMBER_I2C_BUSES 1
 
 #include <system_config.h>
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>

boards/px4/cannode-v1/src/board_config.h

@@ -274,7 +274,7 @@ int usbmsc_archinitialize(void);
 extern int composite_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/px4/esc-v1/src/board_config.h

@@ -343,7 +343,7 @@ int usbmsc_archinitialize(void);
 extern int composite_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/px4/fmu-v2/src/board_config.h

@@ -517,7 +517,7 @@ extern void board_peripheral_reset(int ms);
 
 extern void stm32_usbinitialize(void);
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/px4/fmu-v3/src/board_config.h

@@ -518,7 +518,7 @@ extern void board_peripheral_reset(int ms);
 
 extern void stm32_usbinitialize(void);
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/px4/fmu-v4/src/board_config.h

@@ -393,7 +393,7 @@ extern void stm32_usbinitialize(void);
 
 extern void board_peripheral_reset(int ms);
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/px4/fmu-v4pro/src/board_config.h

@@ -390,7 +390,7 @@ extern void board_peripheral_reset(int ms);
 int nsh_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/px4/fmu-v5/src/CMakeLists.txt

@@ -41,9 +41,11 @@ add_library(drivers_board
 	timer_config.c
 	usb.c
 )
+add_dependencies(drivers_board arch_board_hw_info)
 
 target_link_libraries(drivers_board
 	PRIVATE
+		arch_board_hw_info
 		drivers__led # drv_led_start
 		nuttx_arch # sdio
 		nuttx_drivers # sdio

boards/px4/fmu-v5/src/board_config.h

@@ -737,7 +737,7 @@ extern void board_peripheral_reset(int ms);
 int nsh_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/px4/fmu-v5/src/init.c

@@ -69,6 +69,8 @@
 #include <drivers/drv_board_led.h>
 #include <systemlib/px4_macros.h>
 #include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+#include <px4_platform/board_determine_hw_info.h>
 #include <drivers/boards/common/board_dma_alloc.h>
 
 /****************************************************************************
@@ -137,7 +139,7 @@ __EXPORT void board_on_reset(int status)
 	/* configure the GPIO pins to outputs and keep them low */
 
 	const uint32_t gpio[] = PX4_GPIO_PWM_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	if (status >= 0) {
 		up_mdelay(6);
@@ -166,7 +168,7 @@ stm32_boardinitialize(void)
 	/* configure pins */
 
 	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	/* configure SPI interfaces */
 

boards/px4/fmu-v5x/src/CMakeLists.txt

@@ -41,9 +41,11 @@ add_library(drivers_board
 	timer_config.c
 	usb.c
 )
+add_dependencies(drivers_board arch_board_hw_info)
 
 target_link_libraries(drivers_board
 	PRIVATE
+		arch_board_hw_info
 		drivers__led # drv_led_start
 		nuttx_arch # sdio
 		nuttx_drivers # sdio

boards/px4/fmu-v5x/src/board_config.h

@@ -736,7 +736,7 @@ extern void board_peripheral_reset(int ms);
 int nsh_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/px4/fmu-v5x/src/init.c

@@ -69,6 +69,8 @@
 #include <drivers/drv_board_led.h>
 #include <systemlib/px4_macros.h>
 #include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+#include <px4_platform/board_determine_hw_info.h>
 #include <drivers/boards/common/board_dma_alloc.h>
 
 /****************************************************************************
@@ -143,7 +145,7 @@ __EXPORT void board_on_reset(int status)
 	/* configure the GPIO pins to outputs and keep them low */
 
 	const uint32_t gpio[] = PX4_GPIO_PWM_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	if (status >= 0) {
 		up_mdelay(6);
@@ -172,7 +174,7 @@ stm32_boardinitialize(void)
 	/* configure pins */
 
 	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
-	board_gpio_init(gpio, arraySize(gpio));
+	px4_gpio_init(gpio, arraySize(gpio));
 
 	/* configure SPI interfaces */
 

boards/px4/io-v2/src/board_config.h

@@ -47,7 +47,7 @@
 #include <nuttx/compiler.h>
 #include <stdint.h>
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 /******************************************************************************
  * Definitions

boards/px4/raspberrypi/src/board_config.h

@@ -55,4 +55,4 @@
 #define ADC_BATTERY_CURRENT_CHANNEL 1
 
 #include <system_config.h>
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>

boards/px4/sitl/src/board_config.h

@@ -58,4 +58,4 @@
 #define BOARD_ARMED_STATE_LED  LED_GREEN
 
 #include <system_config.h>
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>

boards/thiemar/s2740vc-v1/src/board_config.h

@@ -123,7 +123,7 @@ int board_can_initialize(void);
 extern int composite_archinitialize(void);
 #endif
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

boards/uvify/core/src/board_config.h

@@ -382,7 +382,7 @@ extern void stm32_usbinitialize(void);
 
 extern void board_peripheral_reset(int ms);
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */
 

platforms/common/include/px4_platform_common/board_common.h

@@ -1079,4 +1079,3 @@ __EXPORT bool board_has_bus(enum board_bus_types type, uint32_t bus);
  */
 int board_hardfault_init(int display_to_console, bool allow_prompt);
 
-#include "board_internal_common.h"

platforms/nuttx/src/px4/common/CMakeLists.txt

@@ -36,6 +36,7 @@ if (NOT ${PX4_BOARD} MATCHES "px4_io")
 
 	add_library(px4_layer
 		console_buffer.cpp
+		gpio.c
 		px4_nuttx_tasks.c
 		px4_nuttx_impl.cpp
 		px4_init.cpp

platforms/nuttx/src/px4/common/gpio.c

@@ -33,7 +33,7 @@
  ****************************************************************************/
 
 /**
- * @file board_gpio_init.c.c
+ * @file gpio.c
  * Implementation of Generic PIO init Note we use he HAL version of configgpio
  * So this will work with any ARCH
  */
@@ -41,10 +41,10 @@
 #include <px4_platform_common/px4_config.h>
 
 /************************************************************************************
- * Name: board_gpio_init
+ * Name: px4_gpio_init
  *
  * Description:
- *   Board may provide a list of GPI pins to get initialized
+ *   A board may provide a list of GPI pins to get initialized
  *
  *  list    - A list of GPIO pins to be initialized
  *  count   - Size of the list
@@ -53,7 +53,7 @@
   ************************************************************************************/
 
 
-void board_gpio_init(const uint32_t list[], int count)
+void px4_gpio_init(const uint32_t list[], int count)
 {
 	for (int gpio = 0; gpio < count; gpio++) {
 		if (list[gpio] != 0) {

platforms/nuttx/src/px4/common/include/px4_platform/board_determine_hw_info.h

@@ -1,7 +1,6 @@
 /****************************************************************************
  *
- *   Copyright (C) 2017 PX4 Development Team. All rights reserved.
+ *   Copyright (c) 2019 PX4 Development Team. All rights reserved.
- *                 Author: David Sidrane <david_s5@nscdg.com>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -31,36 +30,10 @@
  * POSSIBILITY OF SUCH DAMAGE.
  *
  ****************************************************************************/
-
-/**
- * @file board_internal_common.h
- *
- * Provide the internal common board interfaces that should only be used
- * in the board source.
- */
-
 #pragma once
 
-/************************************************************************************
- * Included Files
- ************************************************************************************/
 
-/************************************************************************************
+__BEGIN_DECLS
- * Name: board_gpio_init
- *
- * Description:
- *   Board may provide a list of GPI pins to get initialized
- *
- * Input Parameters:
- *  list    - A list of GPIO pins to be initialized
- *  count   - Size of the list
- *
- * Returned Value:
- *   Nothing
- *
- ************************************************************************************/
-
-__EXPORT void board_gpio_init(const uint32_t list[], int count);
 
 /************************************************************************************
   * Name: board_determine_hw_info
@@ -84,3 +57,6 @@ __EXPORT void board_gpio_init(const uint32_t list[], int count);
  ************************************************************************************/
 
 __EXPORT int board_determine_hw_info(void);
+
+__END_DECLS
+

platforms/nuttx/src/px4/common/include/px4_platform/gpio.h

@@ -0,0 +1,56 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2019 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+#pragma once
+
+
+__BEGIN_DECLS
+
+/************************************************************************************
+ * Name: px4_gpio_init
+ *
+ * Description:
+ *   A board may provide a list of GPI pins to get initialized
+ *
+ * Input Parameters:
+ *  list    - A list of GPIO pins to be initialized
+ *  count   - Size of the list
+ *
+ * Returned Value:
+ *   Nothing
+ *
+ ************************************************************************************/
+
+__EXPORT void px4_gpio_init(const uint32_t list[], int count);
+
+__END_DECLS
+

platforms/nuttx/src/px4/stm/stm32_common/board_hw_info/CMakeLists.txt

@@ -0,0 +1,36 @@
+############################################################################
+#
+#   Copyright (c) 2019 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+px4_add_library(arch_board_hw_info
+	board_hw_rev_ver.c
+)

platforms/nuttx/src/px4/stm/stm32_common/board_hw_info/board_hw_rev_ver.c

@@ -40,10 +40,9 @@
 #include <drivers/drv_adc.h>
 #include <px4_arch/adc.h>
 #include <px4_platform_common/px4_config.h>
+#include <px4_platform/board_determine_hw_info.h>
 #include <stdio.h>
-#include "board_config.h"
+#include <board_config.h>
-
-#include "../board_internal_common.h"
 
 #include <systemlib/px4_macros.h>
 

platforms/nuttx/src/px4/stm/stm32f7/CMakeLists.txt

@@ -33,6 +33,7 @@
 
 
 add_subdirectory(../stm32_common/adc adc)
+add_subdirectory(../stm32_common/board_hw_info board_hw_info)
 add_subdirectory(../stm32_common/dshot dshot)
 add_subdirectory(../stm32_common/hrt hrt)
 add_subdirectory(../stm32_common/led_pwm led_pwm)

platforms/qurt/include/board_config.h

@@ -13,4 +13,4 @@
 #define BOARD_HAS_NO_RESET
 #define BOARD_HAS_NO_BOOTLOADER
 
-#include <drivers/boards/common/board_common.h>
+#include <px4_platform_common/board_common.h>

src/drivers/boards/common/CMakeLists.txt

@@ -38,7 +38,6 @@ if ((${PX4_PLATFORM} MATCHES "nuttx") AND NOT ${PX4_BOARD} MATCHES "px4_io")
 		board_crashdump.c
 		board_dma_alloc.c
 		board_fat_dma_alloc.c
-		board_gpio_init.c
 		)
 
 	if (${CONFIG_ARCH_CHIP} MATCHES "kinetis")