mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-05-27 02:06:27 +08:00
docs(docs): Minor subedit
This commit is contained in:
Hamish Willee
@@ -1,20 +1,20 @@
|
|||||||
# AEDROX AEDROXH7
|
# AEDROX AEDROXH7
|
||||||
|
|
||||||
|
<Badge type="tip" text="PX4 v1.18" />
|
||||||
|
|
||||||
::: warning
|
::: warning
|
||||||
PX4 does not manufacture this (or any) autopilot.
|
PX4 does not manufacture this (or any) autopilot.
|
||||||
Contact the [manufacturer](https://aedrox.com/) for hardware support.
|
Contact the [manufacturer](https://aedrox.com/) for hardware support.
|
||||||
:::
|
:::
|
||||||
|
|
||||||
|
The AEDROXH7 is an STM32H743-based FPV / racing flight controller from AEDROX.
|
||||||
|
|
||||||
|
For full hardware documentation and pinouts, see the [manufacturer documentation](https://aedrox.gitbook.io/docs).
|
||||||
|
|
||||||
::: info
|
::: info
|
||||||
This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
|
This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
|
||||||
:::
|
:::
|
||||||
|
|
||||||
The AEDROXH7 is an STM32H743-based FPV / racing flight controller from AEDROX.
|
|
||||||
|
|
||||||
Purchase from [aedrox.com](https://www.aedrox.com/).
|
|
||||||
|
|
||||||
For full hardware documentation and pinouts, see the [manufacturer documentation](https://aedrox.gitbook.io/docs).
|
|
||||||
|
|
||||||
## Key Features
|
## Key Features
|
||||||
|
|
||||||
- MCU: STM32H743VIM6 32-bit processor running at 480 MHz
|
- MCU: STM32H743VIM6 32-bit processor running at 480 MHz
|
||||||
@@ -32,56 +32,61 @@ For full hardware documentation and pinouts, see the [manufacturer documentation
|
|||||||
|
|
||||||
No on-board magnetometer; PX4 runs with `SYS_HAS_MAG=0` and EKF2 gravity fusion enabled by default.
|
No on-board magnetometer; PX4 runs with `SYS_HAS_MAG=0` and EKF2 gravity fusion enabled by default.
|
||||||
|
|
||||||
|
## Where to Buy {#store}
|
||||||
|
|
||||||
|
- [aedrox.com](https://www.aedrox.com/).
|
||||||
|
|
||||||
## Connectors and Pins
|
## Connectors and Pins
|
||||||
|
|
||||||
### UARTs
|
### UARTs
|
||||||
|
|
||||||
| Port | MCU peripheral | Device | Function |
|
| Port | MCU peripheral | Device | Function |
|
||||||
| ------- | -------------- | ---------- | ---------------------------- |
|
| --------- | -------------- | ---------- | ---------------------------- |
|
||||||
| SERIAL1 | USART1 | /dev/ttyS0 | TEL1 (MAVLink) |
|
| `SERIAL1` | USART1 | /dev/ttyS0 | TELEM1 (MAVLink) |
|
||||||
| SERIAL2 | USART2 | /dev/ttyS1 | GPS1 |
|
| `SERIAL2` | USART2 | /dev/ttyS1 | GPS1 |
|
||||||
| SERIAL3 | USART3 | /dev/ttyS2 | RC input |
|
| `SERIAL3` | USART3 | /dev/ttyS2 | RC input |
|
||||||
| SERIAL4 | UART4 | /dev/ttyS3 | TEL2 |
|
| `SERIAL4` | UART4 | /dev/ttyS3 | TELEM2 |
|
||||||
| SERIAL7 | UART7 | /dev/ttyS4 | ESC telemetry (RX only) |
|
| `SERIAL7` | UART7 | /dev/ttyS4 | ESC telemetry (RX only) |
|
||||||
| SERIAL8 | UART8 | /dev/ttyS5 | Debug shell (system console) |
|
| `SERIAL8` | UART8 | /dev/ttyS5 | Debug shell (system console) |
|
||||||
|
|
||||||
SERIAL7 is wired RX-only by the vendor (intended for ESC telemetry).
|
`SERIAL7` is wired RX-only by the vendor (intended for ESC telemetry).
|
||||||
SERIAL8 is the system console at 57600 8N1 (device: `/dev/ttyS5`).
|
`SERIAL8` is the system console at 57600 8N1 (device: `/dev/ttyS5`).
|
||||||
|
|
||||||
::: note
|
::: info
|
||||||
The vendor brings SERIAL8 out on the HD VTX connector (intended for DJI / MSP DisplayPort), but the default PX4 config uses it as the system console. To use it for MSP DisplayPort instead, move the console off UART8, then start the [msp_osd](../modules/modules_driver.md#msp-osd) driver on `/dev/ttyS5`.
|
The vendor brings `SERIAL8` out on the HD VTX connector (intended for DJI / MSP DisplayPort), but the default PX4 config uses it as the system console. To use it for MSP DisplayPort instead, move the console off UART8, then start the [msp_osd](../modules/modules_driver.md#msp-osd) driver on `/dev/ttyS5`.
|
||||||
:::
|
:::
|
||||||
|
|
||||||
### Motor / Servo Outputs
|
### PWM Outputs {#pwm_outputs}
|
||||||
|
|
||||||
8 PWM motor outputs (M1-M8), all DShot and bidirectional-DShot (RPM telemetry) capable.
|
8 PWM motor outputs (M1-M8), all [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry) (RPM telemetry) capable.
|
||||||
|
|
||||||
The M5-M8 motor connector additionally exposes two user-controllable GPIOs (`GPIO1` / `GPIO2`, on PA2 / PA3) alongside the motor signals. Toggle them at runtime with the `gpio` command (see "User GPIOs" below).
|
The M5-M8 motor connector additionally exposes two user-controllable GPIOs (`GPIO1` / `GPIO2`, on PA2 / PA3) alongside the motor signals.
|
||||||
|
Toggle them at runtime with the `gpio` command (see "User GPIOs" below).
|
||||||
|
|
||||||
A separate addressable-LED-strip pad is brought out; currently driven as a plain GPIO in this port .
|
A separate addressable-LED-strip pad is brought out; currently driven as a plain GPIO in this port .
|
||||||
|
|
||||||
### Status LEDs
|
### Status LEDs
|
||||||
|
|
||||||
| Silkscreen | MCU pin | Color | Function |
|
| Silkscreen | MCU pin | Color | Function |
|
||||||
| ---------- | ------- | ----- | -------- |
|
| ---------- | ------- | ----- | ---------------------------------------------------------------------------- |
|
||||||
| LED1 | PE2 | Blue | MCU activity, solid when armed |
|
| LED1 | PE2 | Blue | MCU activity, solid when armed |
|
||||||
| LED2 | - | Green | IMU power-supply indicator |
|
| LED2 | - | Green | IMU power-supply indicator |
|
||||||
| LED3 | - | Green | MCU / baro / OSD power-supply indicator |
|
| LED3 | - | Green | MCU / baro / OSD power-supply indicator |
|
||||||
| LED4 | PE5 | Green | MCU activity, blinks based on flight state (preflight / disarmed / failsafe) |
|
| LED4 | PE5 | Green | MCU activity, blinks based on flight state (preflight / disarmed / failsafe) |
|
||||||
| LED5 | - | - | 10v VTX rail indicator (lit when VTX power is enabled) |
|
| LED5 | - | - | 10v VTX rail indicator (lit when VTX power is enabled) |
|
||||||
|
|
||||||
### Other I/O
|
### Other I/O
|
||||||
|
|
||||||
| Function | MCU pin | Notes |
|
| Function | MCU pin | Notes |
|
||||||
| -------------- | ------- | ---------------------------- |
|
| --------------- | --------- | ------------------------------------------------------------------------------------------------------------------------------------- |
|
||||||
| Buzzer | PA7 | Drives an NPN low-side switch, use a basic 2-pin active buzzer (e.g. TMB12A05) |
|
| Buzzer | PA7 | Drives an NPN low-side switch, use a basic 2-pin active buzzer (e.g. TMB12A05) |
|
||||||
| VTX power | PB1 | Active high |
|
| VTX power | PB1 | Active high |
|
||||||
| Camera switch | PD15 | Active high, currently hard-coded to camera 1 at boot (no runtime control yet); use `gpio write D15 1` from nsh to switch to camera 2 |
|
| Camera switch | PD15 | Active high, currently hard-coded to camera 1 at boot (no runtime control yet); use `gpio write D15 1` from nsh to switch to camera 2 |
|
||||||
| PINIO 1 / 2 | PA2 / PA3 | User-controllable GPIOs via `gpio` command |
|
| PINIO 1 / 2 | PA2 / PA3 | User-controllable GPIOs via `gpio` command |
|
||||||
| CAN1 silent | PD12 | Driven low to enable CAN bus |
|
| CAN1 silent | PD12 | Driven low to enable CAN bus |
|
||||||
| Battery V sense| PC0 | ADC1 IN10, calibrate `BAT1_V_DIV` per build |
|
| Battery V sense | PC0 | ADC1 IN10, calibrate `BAT1_V_DIV` per build |
|
||||||
| Battery I sense| PC1 | ADC1 IN11, calibrate `BAT1_A_PER_V` per ESC, or use DShot telemetry for current (`BAT1_SOURCE`) |
|
| Battery I sense | PC1 | ADC1 IN11, calibrate `BAT1_A_PER_V` per ESC, or use DShot telemetry for current (`BAT1_SOURCE`) |
|
||||||
| USB VBUS sense | PC15 | Non-standard pin for VBUS sense |
|
| USB VBUS sense | PC15 | Non-standard pin for VBUS sense |
|
||||||
|
|
||||||
### Analog OSD (MAX7456)
|
### Analog OSD (MAX7456)
|
||||||
|
|
||||||
|
|||||||
Reference in New Issue
Block a user