mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-05-27 10:17:45 +08:00
boards: add new Diatone Mamba F405 mk2
This commit is contained in:
achim
GitHub
@@ -52,6 +52,7 @@ pipeline {
|
|||||||
"cuav_x7pro_default",
|
"cuav_x7pro_default",
|
||||||
"cubepilot_cubeorange_default",
|
"cubepilot_cubeorange_default",
|
||||||
"cubepilot_cubeyellow_default",
|
"cubepilot_cubeyellow_default",
|
||||||
|
"diatone_mamba-f405-mk2_default",
|
||||||
"freefly_can-rtk-gps_canbootloader",
|
"freefly_can-rtk-gps_canbootloader",
|
||||||
"freefly_can-rtk-gps_default",
|
"freefly_can-rtk-gps_default",
|
||||||
"holybro_can-gps-v1_canbootloader",
|
"holybro_can-gps-v1_canbootloader",
|
||||||
|
|||||||
@@ -30,6 +30,7 @@ jobs:
|
|||||||
cuav_x7pro,
|
cuav_x7pro,
|
||||||
cubepilot_cubeorange,
|
cubepilot_cubeorange,
|
||||||
cubepilot_cubeyellow,
|
cubepilot_cubeyellow,
|
||||||
|
diatone_mamba-f405-mk2,
|
||||||
freefly_can-rtk-gps,
|
freefly_can-rtk-gps,
|
||||||
holybro_can-gps-v1,
|
holybro_can-gps-v1,
|
||||||
holybro_durandal-v1,
|
holybro_durandal-v1,
|
||||||
|
|||||||
Binary file not shown.
@@ -0,0 +1,53 @@
|
|||||||
|
CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
|
||||||
|
CONFIG_BOARD_ARCHITECTURE="cortex-m4"
|
||||||
|
CONFIG_BOARD_CONSTRAINED_FLASH=y
|
||||||
|
CONFIG_BOARD_NO_HELP=y
|
||||||
|
CONFIG_BOARD_CONSTRAINED_MEMORY=y
|
||||||
|
CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
|
||||||
|
CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
|
||||||
|
CONFIG_DRIVERS_ADC_BOARD_ADC=y
|
||||||
|
CONFIG_DRIVERS_BAROMETER_BMP280=y
|
||||||
|
CONFIG_DRIVERS_DSHOT=y
|
||||||
|
CONFIG_DRIVERS_GPS=y
|
||||||
|
CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
|
||||||
|
CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
|
||||||
|
CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
|
||||||
|
CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
|
||||||
|
CONFIG_DRIVERS_MAGNETOMETER_AKM_AK8963=y
|
||||||
|
CONFIG_DRIVERS_OSD=y
|
||||||
|
CONFIG_DRIVERS_PWM_OUT=y
|
||||||
|
CONFIG_DRIVERS_RC_INPUT=y
|
||||||
|
CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
|
||||||
|
CONFIG_MODULES_BATTERY_STATUS=y
|
||||||
|
CONFIG_MODULES_COMMANDER=y
|
||||||
|
CONFIG_MODULES_CONTROL_ALLOCATOR=y
|
||||||
|
CONFIG_MODULES_DATAMAN=y
|
||||||
|
CONFIG_MODULES_EKF2=y
|
||||||
|
CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
|
||||||
|
CONFIG_MODULES_LAND_DETECTOR=y
|
||||||
|
CONFIG_MODULES_LOAD_MON=y
|
||||||
|
CONFIG_MODULES_LOGGER=y
|
||||||
|
CONFIG_MODULES_MANUAL_CONTROL=y
|
||||||
|
CONFIG_MODULES_MAVLINK=y
|
||||||
|
CONFIG_MODULES_MC_ATT_CONTROL=y
|
||||||
|
CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
|
||||||
|
CONFIG_MODULES_MC_POS_CONTROL=y
|
||||||
|
CONFIG_MODULES_MC_RATE_CONTROL=y
|
||||||
|
CONFIG_MODULES_NAVIGATOR=y
|
||||||
|
CONFIG_MODULES_RC_UPDATE=y
|
||||||
|
CONFIG_MODULES_SENSORS=y
|
||||||
|
CONFIG_SYSTEMCMDS_DMESG=y
|
||||||
|
CONFIG_SYSTEMCMDS_MFT=y
|
||||||
|
CONFIG_SYSTEMCMDS_MIXER=y
|
||||||
|
CONFIG_SYSTEMCMDS_MOTOR_TEST=y
|
||||||
|
CONFIG_SYSTEMCMDS_MTD=y
|
||||||
|
CONFIG_SYSTEMCMDS_NSHTERM=y
|
||||||
|
CONFIG_SYSTEMCMDS_PARAM=y
|
||||||
|
CONFIG_SYSTEMCMDS_PERF=y
|
||||||
|
CONFIG_SYSTEMCMDS_PWM=y
|
||||||
|
CONFIG_SYSTEMCMDS_REBOOT=y
|
||||||
|
CONFIG_SYSTEMCMDS_TOP=y
|
||||||
|
CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
|
||||||
|
CONFIG_SYSTEMCMDS_UORB=y
|
||||||
|
CONFIG_SYSTEMCMDS_VER=y
|
||||||
|
CONFIG_SYSTEMCMDS_WORK_QUEUE=y
|
||||||
@@ -0,0 +1,13 @@
|
|||||||
|
{
|
||||||
|
"board_id": 42,
|
||||||
|
"magic": "MAMBAF405MK2",
|
||||||
|
"description": "Firmware for the MambaF405Mk2 board",
|
||||||
|
"image": "",
|
||||||
|
"build_time": 0,
|
||||||
|
"summary": "PX4/MambaF405",
|
||||||
|
"version": "0.1",
|
||||||
|
"image_size": 0,
|
||||||
|
"image_maxsize": 1032192,
|
||||||
|
"git_identity": "",
|
||||||
|
"board_revision": 0
|
||||||
|
}
|
||||||
@@ -0,0 +1,18 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
#
|
||||||
|
# board specific defaults
|
||||||
|
#------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
# system_power unavailable
|
||||||
|
param set-default CBRK_SUPPLY_CHK 894281
|
||||||
|
|
||||||
|
# Disable safety switch by default
|
||||||
|
param set-default CBRK_IO_SAFETY 22027
|
||||||
|
|
||||||
|
# use the Q attitude estimator, it works w/o mag or GPS.
|
||||||
|
param set-default SYS_MC_EST_GROUP 3
|
||||||
|
param set-default ATT_ACC_COMP 0
|
||||||
|
param set-default ATT_W_ACC 0.4000
|
||||||
|
param set-default ATT_W_GYRO_BIAS 0.0000
|
||||||
|
|
||||||
|
param set-default SYS_HAS_MAG 0
|
||||||
@@ -0,0 +1,9 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
#
|
||||||
|
# Mamba F405 MK2 specific board extras init
|
||||||
|
#------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
if ! param compare OSD_ATXXXX_CFG 0
|
||||||
|
then
|
||||||
|
atxxxx start -s
|
||||||
|
fi
|
||||||
@@ -0,0 +1,25 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
#
|
||||||
|
# Mamba F405 MK2 specific board sensors init
|
||||||
|
#------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
board_adc start
|
||||||
|
|
||||||
|
if ! mpu6000 -R 6 -s start
|
||||||
|
then
|
||||||
|
# some boards such as the Hobbywing XRotor F4 G2 use the ICM-20602
|
||||||
|
icm20602 -s -R 6 start
|
||||||
|
fi
|
||||||
|
|
||||||
|
if ! hmc5883 -T -X start
|
||||||
|
then
|
||||||
|
if mpu9250_i2c -X -b 2 -a 0x68 -R 28 start; then
|
||||||
|
sleep 1 # wait for mpu9250 to be configured with bypass enabled
|
||||||
|
ak8963 -X -b 2 -R 30 start # -R 34
|
||||||
|
sleep 1
|
||||||
|
mpu9250_i2c stop
|
||||||
|
ak8963 -X -b 2 -R 30 start # -R 34
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
|
||||||
|
bmp280 -X -b 2 start
|
||||||
@@ -0,0 +1,327 @@
|
|||||||
|
/************************************************************************************
|
||||||
|
* nuttx-configs/diatone_mamba-f405-mk2/include/board.h
|
||||||
|
* include/arch/board/board.h
|
||||||
|
*
|
||||||
|
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
*
|
||||||
|
* Copyright (c) 2018 PX4 Development Team. All rights reserved.
|
||||||
|
* Author: Nathan Tsoi <nathan@vertile.com>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __CONFIG_MAMBAF405MK2_INCLUDE_BOARD_H
|
||||||
|
#define __CONFIG_MAMBAF405MK2_INCLUDE_BOARD_H
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Included Files
|
||||||
|
************************************************************************************/
|
||||||
|
#include "board_dma_map.h"
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#ifndef __ASSEMBLY__
|
||||||
|
# include <stdint.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include "stm32_rcc.h"
|
||||||
|
#include "stm32_sdio.h"
|
||||||
|
#include "stm32.h"
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Definitions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/* Clocking *************************************************************************/
|
||||||
|
/* The mambaf405mk2 board features a single 8MHz crystal. Space is provided
|
||||||
|
* for a 32kHz RTC backup crystal, but it is not stuffed.
|
||||||
|
*
|
||||||
|
* This is the canonical configuration:
|
||||||
|
* System Clock source : PLL (HSE)
|
||||||
|
* SYSCLK(Hz) : 168000000 Determined by PLL configuration
|
||||||
|
* HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE)
|
||||||
|
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
||||||
|
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
|
||||||
|
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
|
||||||
|
* HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL)
|
||||||
|
* PLLM : 8 (STM32_PLLCFG_PLLM)
|
||||||
|
* PLLN : 336 (STM32_PLLCFG_PLLN)
|
||||||
|
* PLLP : 2 (STM32_PLLCFG_PLLP)
|
||||||
|
* PLLQ : 7 (STM32_PLLCFG_PLLQ)
|
||||||
|
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
|
||||||
|
* Flash Latency(WS) : 5
|
||||||
|
* Prefetch Buffer : OFF
|
||||||
|
* Instruction cache : ON
|
||||||
|
* Data cache : ON
|
||||||
|
* Require 48MHz for USB OTG FS, : Enabled
|
||||||
|
* SDIO and RNG clock
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* HSI - 16 MHz RC factory-trimmed
|
||||||
|
* LSI - 32 KHz RC
|
||||||
|
* HSE - On-board crystal frequency is 8MHz
|
||||||
|
* LSE - 32.768 kHz
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define STM32_BOARD_XTAL 8000000ul
|
||||||
|
|
||||||
|
#define STM32_HSI_FREQUENCY 16000000ul
|
||||||
|
#define STM32_LSI_FREQUENCY 32000
|
||||||
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||||||
|
#define STM32_LSE_FREQUENCY 32768
|
||||||
|
|
||||||
|
/* Main PLL Configuration.
|
||||||
|
*
|
||||||
|
* PLL source is HSE
|
||||||
|
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
||||||
|
* = (8,000,000 / 8) * 336
|
||||||
|
* = 336,000,000
|
||||||
|
* SYSCLK = PLL_VCO / PLLP
|
||||||
|
* = 336,000,000 / 2 = 168,000,000
|
||||||
|
* USB OTG FS, SDIO and RNG Clock
|
||||||
|
* = PLL_VCO / PLLQ
|
||||||
|
* = 48,000,000
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
|
||||||
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
|
||||||
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
||||||
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
|
||||||
|
|
||||||
|
#define STM32_SYSCLK_FREQUENCY 168000000ul
|
||||||
|
|
||||||
|
/* AHB clock (HCLK) is SYSCLK (168MHz) */
|
||||||
|
|
||||||
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||||||
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||||||
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||||
|
|
||||||
|
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
|
||||||
|
|
||||||
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
||||||
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
||||||
|
|
||||||
|
/* Timers driven from APB1 will be twice PCLK1 */
|
||||||
|
|
||||||
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
|
||||||
|
/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
|
||||||
|
|
||||||
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
||||||
|
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||||
|
|
||||||
|
/* Timers driven from APB2 will be twice PCLK2 */
|
||||||
|
|
||||||
|
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||||
|
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||||
|
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||||
|
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||||
|
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||||
|
|
||||||
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||||||
|
* otherwise frequency is 2xAPBx.
|
||||||
|
* Note: TIM1,8-11 are on APB2, others on APB1
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define BOARD_TIM1_FREQUENCY STM32_APB2_TIM1_CLKIN
|
||||||
|
#define BOARD_TIM2_FREQUENCY STM32_APB1_TIM2_CLKIN
|
||||||
|
#define BOARD_TIM3_FREQUENCY STM32_APB1_TIM3_CLKIN
|
||||||
|
#define BOARD_TIM4_FREQUENCY STM32_APB1_TIM4_CLKIN
|
||||||
|
#define BOARD_TIM5_FREQUENCY STM32_APB1_TIM5_CLKIN
|
||||||
|
#define BOARD_TIM6_FREQUENCY STM32_APB1_TIM6_CLKIN
|
||||||
|
#define BOARD_TIM7_FREQUENCY STM32_APB1_TIM7_CLKIN
|
||||||
|
#define BOARD_TIM8_FREQUENCY STM32_APB2_TIM8_CLKIN
|
||||||
|
#define BOARD_TIM9_FREQUENCY STM32_APB2_TIM9_CLKIN
|
||||||
|
#define BOARD_TIM10_FREQUENCY STM32_APB2_TIM10_CLKIN
|
||||||
|
#define BOARD_TIM11_FREQUENCY STM32_APB2_TIM11_CLKIN
|
||||||
|
#define BOARD_TIM12_FREQUENCY STM32_APB1_TIM12_CLKIN
|
||||||
|
#define BOARD_TIM13_FREQUENCY STM32_APB1_TIM13_CLKIN
|
||||||
|
#define BOARD_TIM14_FREQUENCY STM32_APB1_TIM14_CLKIN
|
||||||
|
|
||||||
|
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
||||||
|
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
||||||
|
* to service FIFOs in interrupt driven mode. These values have not been
|
||||||
|
* tuned!!!
|
||||||
|
*
|
||||||
|
* SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define SDIO_INIT_CLKDIV (118 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
|
||||||
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
|
||||||
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef CONFIG_STM32_SDIO_DMA
|
||||||
|
# define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
#else
|
||||||
|
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
|
||||||
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef CONFIG_STM32_SDIO_DMA
|
||||||
|
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
#else
|
||||||
|
# define SDIO_SDXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* LED definitions ******************************************************************/
|
||||||
|
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
|
||||||
|
* way. The following definitions are used to access individual LEDs.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* LED index values for use with stm32_setled() */
|
||||||
|
|
||||||
|
#define BOARD_LED1 0
|
||||||
|
//#define BOARD_LED2 1
|
||||||
|
#define BOARD_NLEDS 1
|
||||||
|
|
||||||
|
#define BOARD_LED_BLUE BOARD_LED1
|
||||||
|
//#define BOARD_LED_RED BOARD_LED2
|
||||||
|
|
||||||
|
/* LED bits for use with stm32_setleds() */
|
||||||
|
|
||||||
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
||||||
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
||||||
|
|
||||||
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 2 LEDs on board the
|
||||||
|
* omnibusf4sd. The following definitions describe how NuttX controls the LEDs:
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define LED_STARTED 0 /* LED1 */
|
||||||
|
#define LED_HEAPALLOCATE 1 /* LED2 */
|
||||||
|
#define LED_IRQSENABLED 2 /* LED1 */
|
||||||
|
#define LED_STACKCREATED 3 /* LED1 + LED2 */
|
||||||
|
#define LED_INIRQ 4 /* LED1 */
|
||||||
|
#define LED_SIGNAL 5 /* LED2 */
|
||||||
|
#define LED_ASSERTION 6 /* LED1 + LED2 */
|
||||||
|
#define LED_PANIC 7 /* LED1 + LED2 */
|
||||||
|
|
||||||
|
/* Alternate function pin selections ************************************************/
|
||||||
|
|
||||||
|
/* UART1:
|
||||||
|
*
|
||||||
|
* PA10 (RX) and PA9 (TX) are broken out on J5
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_USART1_RX GPIO_USART1_RX_1
|
||||||
|
#define GPIO_USART1_TX GPIO_USART1_TX_1
|
||||||
|
|
||||||
|
/* USART3:
|
||||||
|
*
|
||||||
|
* PC10 (TX) and PC11 (RX) are broken out on J4
|
||||||
|
*
|
||||||
|
* However, this port is shared with SPI3 which contains the BMP280 and MAX7456
|
||||||
|
*
|
||||||
|
* The Silkscreen pin labeled SCL is TX
|
||||||
|
* MISO is RX
|
||||||
|
*/
|
||||||
|
//#define GPIO_USART3_RX GPIO_USART3_RX_2
|
||||||
|
//#define GPIO_USART3_TX GPIO_USART3_TX_2
|
||||||
|
|
||||||
|
/* UART4:
|
||||||
|
*
|
||||||
|
* PA0 (TX) -- Labeled RSSI on the silkscreen is only broken out on a test pad
|
||||||
|
* on the pro version. It's on a 2.54mm header on other versions
|
||||||
|
* PA1 (RX) -- Motor 5 out
|
||||||
|
*/
|
||||||
|
#define GPIO_UART4_RX GPIO_UART4_RX_1
|
||||||
|
#define GPIO_UART4_TX GPIO_UART4_TX_1
|
||||||
|
|
||||||
|
/* UART6:
|
||||||
|
*
|
||||||
|
* PC6 (TX) and PC7 (RX) are broken out on J10
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_USART6_RX GPIO_USART6_RX_1
|
||||||
|
#define GPIO_USART6_TX GPIO_USART6_TX_1
|
||||||
|
|
||||||
|
/* SPI1:
|
||||||
|
* MPU6000
|
||||||
|
* CS: PA4 -- configured in board_config.h
|
||||||
|
* CLK: PA5
|
||||||
|
* MISO: PA6
|
||||||
|
* MOSI: PA7
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1
|
||||||
|
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
|
||||||
|
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
|
||||||
|
|
||||||
|
/* SPI2:
|
||||||
|
* SD Card
|
||||||
|
* CS: PB12 -- configured in board_config.h
|
||||||
|
* CLK: PB13
|
||||||
|
* MISO: PB14
|
||||||
|
* MOSI: PB15
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2
|
||||||
|
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1
|
||||||
|
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1
|
||||||
|
|
||||||
|
/* SPI3:
|
||||||
|
* BMP280
|
||||||
|
* CS: PB3 -- configured in board_config.h
|
||||||
|
* CLK: PC10
|
||||||
|
* MISO: PC11
|
||||||
|
* MOSI: PC12
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_SPI3_SCK GPIO_SPI3_SCK_2
|
||||||
|
#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2
|
||||||
|
#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_2
|
||||||
|
|
||||||
|
/*
|
||||||
|
* I2C (external)
|
||||||
|
*
|
||||||
|
* SCL: PB10
|
||||||
|
* SDA: PB11
|
||||||
|
*
|
||||||
|
* TODO:
|
||||||
|
* The optional _GPIO configurations allow the I2C driver to manually
|
||||||
|
* reset the bus to clear stuck slaves. They match the pin configuration,
|
||||||
|
* but are normally-high GPIOs.
|
||||||
|
*/
|
||||||
|
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1
|
||||||
|
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1
|
||||||
|
|
||||||
|
#endif /* __CONFIG_OMNIBUSF4SD_INCLUDE_BOARD_H */
|
||||||
@@ -0,0 +1,94 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
*
|
||||||
|
* Copyright (c) 2020 PX4 Development Team. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/*
|
||||||
|
| DMA1 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 |
|
||||||
|
|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
|
||||||
|
| Channel 0 | SPI3_RX_1 | - | SPI3_RX_2 | SPI2_RX | SPI2_TX | SPI3_TX_1 | - | SPI3_TX_2 |
|
||||||
|
| Channel 1 | I2C1_RX | - | TIM7_UP_1 | - | TIM7_UP_2 | I2C1_RX_1 | I2C1_TX | I2C1_TX_1 |
|
||||||
|
| Channel 2 | TIM4_CH1 | - | I2C4_RX | TIM4_CH2 | - | I2C4_RX | TIM4_UP | TIM4_CH3 |
|
||||||
|
| Channel 3 | - | TIM2_UP_1 | I2C3_RX_1 | I2C2_EXT_RX | I2C3_TX | TIM2_CH1 | TIM2_CH2 | TIM2_UP_2 |
|
||||||
|
| | | TIM2_CH3 | | | | | TIM2_CH4_1 | TIM2_CH4_2 |
|
||||||
|
| Channel 4 | UART5_RX | USART3_RX | UART4_RX | USART3_TX_1 | UART4_TX | USART2_RX | USART2_TX | UART5_TX |
|
||||||
|
| Channel 5 | UART8_TX | UART7_TX | TIM3_CH4 | UART7_RX | TIM3_CH1 | TIM3_CH2 | UART8_RX | TIM3_CH3 |
|
||||||
|
| | | | TIM3_UP | | TIM3_TRIG | | | |
|
||||||
|
| Channel 6 | TIM5_CH3 | TIM5_CH4_1 | TIM5_CH1 | TIM5_CH4_2 | TIM5_CH2 | - | TIM5_UP_2 | - |
|
||||||
|
| | TIM5_UP_1 | TIM5_TRIG_1 | | TIM5_TRIG_2 | | | | |
|
||||||
|
| Channel 7 | - | TIM6_UP | I2C2_RX | I2C2_RX_1 | USART3_TX_2 | DAC1 | DAC2 | I2C2_TX |
|
||||||
|
| | | | | | | | | |
|
||||||
|
| Usage | | TIM2_UP_1 | TIM3_UP | SPI2_RX | SPI2_TX | | | |
|
||||||
|
|
||||||
|
|
||||||
|
| DMA2 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 |
|
||||||
|
|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
|
||||||
|
| Channel 0 | ADC1_1 | SAI1_A | TIM8_CH1_1 | SAI1_A_1 | ADC1_2 | SAI1_B_1 | TIM1_CH1_1 | - |
|
||||||
|
| | | | TIM8_CH2_1 | | | | TIM1_CH2_1 | |
|
||||||
|
| | | | TIM8_CH3_1 | | | | TIM1_CH3_1 | |
|
||||||
|
| Channel 1 | - | DCMI_1 | ADC2_1 | ADC2_2 | SAI1_B | SPI6_TX | SPI6_RX | DCMI_2 |
|
||||||
|
| Channel 2 | ADC3_1 | ADC3_2 | - | SPI5_RX_1 | SPI5_TX_1 | CRYP_OUT | CRYP_IN | HASH_IN |
|
||||||
|
| Channel 3 | SPI1_RX_1 | - | SPI1_RX_2 | SPI1_TX_1 | - | SPI1_TX_2 | - | QUADSPI |
|
||||||
|
| Channel 4 | SPI4_RX_1 | SPI4_TX_1 | USART1_RX_1 | SDIO | - | USART1_RX_2 | SDIO | USART1_TX |
|
||||||
|
| Channel 5 | - | USART6_RX_1 | USART6_RX_2 | SPI4_RX_2 | SPI4_TX_2 | - | USART6_TX_1 | USART6_TX_2 |
|
||||||
|
| Channel 6 | TIM1_TRIG_1 | TIM1_CH1_2 | TIM1_CH2_2 | TIM1_CH1 | TIM1_CH4 | TIM1_UP | TIM1_CH3_2 | - |
|
||||||
|
| | | | | | TIM1_TRIG_2 | | | |
|
||||||
|
| | | | | | TIM1_COM | | | |
|
||||||
|
| Channel 7 | - | TIM8_UP | TIM8_CH1_2 | TIM8_CH2_2 | TIM8_CH3_2 | SPI5_RX_2 | SPI5_TX_2 | TIM8_CH4 |
|
||||||
|
| | | | | | | | | TIM8_TRIG |
|
||||||
|
| | | | | | | | | TIM8_COM |
|
||||||
|
| | | | | | | | | |
|
||||||
|
| Usage | SPI1_RX_1 | USART6_RX_1 | USART1_RX_1 | SPI1_TX_1 | | | SDIO | |
|
||||||
|
*/
|
||||||
|
|
||||||
|
// DMA1 Channel/Stream Selections
|
||||||
|
//--------------------------------------------//---------------------------//----------------
|
||||||
|
// AVAILABLE // DMA2, Stream 0
|
||||||
|
// DMAMAP_TIM2_UP // DMA1, Stream 1, Channel 3 (DSHOT)
|
||||||
|
// DMAMAP_TIM3_UP // DMA1, Stream 2, Channel 5 (DSHOT)
|
||||||
|
#define DMACHAN_SPI2_RX DMAMAP_SPI2_RX // DMA1, Stream 3, Channel 0 (SPI2 RX)
|
||||||
|
#define DMACHAN_SPI2_TX DMAMAP_SPI2_TX // DMA1, Stream 4, Channel 0 (SPI2 TX)
|
||||||
|
// AVAILABLE // DMA2, Stream 5
|
||||||
|
// AVAILABLE // DMA2, Stream 6
|
||||||
|
// AVAILABLE // DMA2, Stream 7
|
||||||
|
|
||||||
|
// DMA2 Channel/Stream Selections
|
||||||
|
//--------------------------------------------//---------------------------//----------------
|
||||||
|
#define DMACHAN_SPI1_RX DMAMAP_SPI1_RX_1 // DMA2, Stream 0, Channel 3 (SPI1 RX)
|
||||||
|
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_1 // DMA2, Stream 1, Channel 4
|
||||||
|
#define DMAMAP_USART1_RX DMAMAP_USART1_RX_1 // DMA2, Stream 2, Channel 4
|
||||||
|
#define DMACHAN_SPI1_TX DMAMAP_SPI1_TX_1 // DMA2, Stream 3, Channel 3 (SPI1 TX)
|
||||||
|
// AVAILABLE // DMA2, Stream 4
|
||||||
|
// AVAILABLE // DMA2, Stream 5
|
||||||
|
#define DMAMAP_SDIO DMAMAP_SDIO_2 // DMA2, Stream 6, Channel 4
|
||||||
|
// AVAILABLE // DMA2, Stream 7
|
||||||
@@ -0,0 +1,196 @@
|
|||||||
|
#
|
||||||
|
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||||
|
#
|
||||||
|
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||||
|
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||||
|
# modifications.
|
||||||
|
#
|
||||||
|
# CONFIG_DEV_CONSOLE is not set
|
||||||
|
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
|
||||||
|
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
|
||||||
|
# CONFIG_MMCSD_MMCSUPPORT is not set
|
||||||
|
# CONFIG_SPI_CALLBACK is not set
|
||||||
|
# CONFIG_STM32_CCMEXCLUDE is not set
|
||||||
|
CONFIG_ARCH="arm"
|
||||||
|
CONFIG_ARCH_BOARD_CUSTOM=y
|
||||||
|
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/diatone/mamba-f405-mk2/nuttx-config"
|
||||||
|
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
|
||||||
|
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
|
||||||
|
CONFIG_ARCH_CHIP="stm32"
|
||||||
|
CONFIG_ARCH_CHIP_STM32=y
|
||||||
|
CONFIG_ARCH_CHIP_STM32F405RG=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=512
|
||||||
|
CONFIG_ARMV7M_MEMCPY=y
|
||||||
|
CONFIG_ARMV7M_USEBASEPRI=y
|
||||||
|
CONFIG_BOARDCTL_RESET=y
|
||||||
|
CONFIG_BOARD_CRASHDUMP=y
|
||||||
|
CONFIG_BOARD_CUSTOM_LEDS=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||||
|
CONFIG_BOARD_RESET_ON_ASSERT=2
|
||||||
|
CONFIG_BUILTIN=y
|
||||||
|
CONFIG_C99_BOOL8=y
|
||||||
|
CONFIG_CDCACM=y
|
||||||
|
CONFIG_CDCACM_IFLOWCONTROL=y
|
||||||
|
CONFIG_CDCACM_PRODUCTID=0x0001
|
||||||
|
CONFIG_CDCACM_PRODUCTSTR="DiatoneMambaF405 MK2"
|
||||||
|
CONFIG_CDCACM_RXBUFSIZE=600
|
||||||
|
CONFIG_CDCACM_TXBUFSIZE=2000
|
||||||
|
CONFIG_CDCACM_VENDORID=0x26ac
|
||||||
|
CONFIG_CDCACM_VENDORSTR="Diatone"
|
||||||
|
CONFIG_DEBUG_SYMBOLS=y
|
||||||
|
CONFIG_DEV_FIFO_SIZE=0
|
||||||
|
CONFIG_DEV_PIPE_SIZE=70
|
||||||
|
CONFIG_DISABLE_MQUEUE=y
|
||||||
|
CONFIG_DISABLE_POSIX_TIMERS=y
|
||||||
|
CONFIG_FAT_DMAMEMORY=y
|
||||||
|
CONFIG_FAT_LCNAMES=y
|
||||||
|
CONFIG_FAT_LFN=y
|
||||||
|
CONFIG_FAT_LFN_ALIAS_HASH=y
|
||||||
|
CONFIG_FDCLONE_STDIO=y
|
||||||
|
CONFIG_FS_BINFS=y
|
||||||
|
CONFIG_FS_CROMFS=y
|
||||||
|
CONFIG_FS_FAT=y
|
||||||
|
CONFIG_FS_FATTIME=y
|
||||||
|
CONFIG_FS_PROCFS=y
|
||||||
|
CONFIG_FS_PROCFS_REGISTER=y
|
||||||
|
CONFIG_FS_ROMFS=y
|
||||||
|
CONFIG_GRAN=y
|
||||||
|
CONFIG_GRAN_INTR=y
|
||||||
|
CONFIG_HAVE_CXX=y
|
||||||
|
CONFIG_HAVE_CXXINITIALIZE=y
|
||||||
|
CONFIG_I2C=y
|
||||||
|
CONFIG_I2C_RESET=y
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=750
|
||||||
|
CONFIG_LIBC_FLOATINGPOINT=y
|
||||||
|
CONFIG_LIBC_STRERROR=y
|
||||||
|
CONFIG_MEMSET_64BIT=y
|
||||||
|
CONFIG_MEMSET_OPTSPEED=y
|
||||||
|
CONFIG_MMCSD=y
|
||||||
|
CONFIG_MM_REGIONS=2
|
||||||
|
CONFIG_MTD=y
|
||||||
|
CONFIG_MTD_W25=y
|
||||||
|
CONFIG_MTD_BYTE_WRITE=y
|
||||||
|
CONFIG_MTD_PROGMEM=y
|
||||||
|
CONFIG_MTD_PARTITION=y
|
||||||
|
CONFIG_NSH_ARCHINIT=y
|
||||||
|
CONFIG_NSH_BUILTIN_APPS=y
|
||||||
|
CONFIG_NSH_CROMFSETC=y
|
||||||
|
CONFIG_NSH_DISABLE_BASENAME=y
|
||||||
|
CONFIG_NSH_DISABLE_DD=y
|
||||||
|
CONFIG_NSH_DISABLE_DIRNAME=y
|
||||||
|
CONFIG_NSH_DISABLE_HEXDUMP=y
|
||||||
|
CONFIG_NSH_DISABLE_IFCONFIG=y
|
||||||
|
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||||
|
CONFIG_NSH_DISABLE_LOSETUP=y
|
||||||
|
CONFIG_NSH_DISABLE_MKFIFO=y
|
||||||
|
CONFIG_NSH_DISABLE_MKRD=y
|
||||||
|
CONFIG_NSH_DISABLE_PUT=y
|
||||||
|
CONFIG_NSH_DISABLE_REBOOT=y
|
||||||
|
CONFIG_NSH_DISABLE_TELNETD=y
|
||||||
|
CONFIG_NSH_DISABLE_UNAME=y
|
||||||
|
CONFIG_NSH_DISABLE_WGET=y
|
||||||
|
CONFIG_NSH_DISABLE_XD=y
|
||||||
|
CONFIG_NSH_FATDEVNO=0
|
||||||
|
CONFIG_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_NSH_LINELEN=128
|
||||||
|
CONFIG_NSH_MAXARGUMENTS=15
|
||||||
|
CONFIG_NSH_MMCSDSPIPORTNO=2
|
||||||
|
CONFIG_NSH_NESTDEPTH=8
|
||||||
|
CONFIG_NSH_READLINE=y
|
||||||
|
CONFIG_NSH_ROMFSETC=y
|
||||||
|
CONFIG_NSH_ROMFSSECTSIZE=128
|
||||||
|
CONFIG_NSH_STRERROR=y
|
||||||
|
CONFIG_NSH_VARS=y
|
||||||
|
CONFIG_PIPES=y
|
||||||
|
CONFIG_PREALLOC_TIMERS=50
|
||||||
|
CONFIG_PRIORITY_INHERITANCE=y
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=512
|
||||||
|
CONFIG_W25_SETSPEED=y
|
||||||
|
CONFIG_W25_WRITEWAIT=y
|
||||||
|
CONFIG_RAM_SIZE=196608
|
||||||
|
CONFIG_RAM_START=0x20000000
|
||||||
|
CONFIG_RAW_BINARY=y
|
||||||
|
CONFIG_RTC_DATETIME=y
|
||||||
|
CONFIG_SCHED_ATEXIT=y
|
||||||
|
CONFIG_SCHED_HPWORK=y
|
||||||
|
CONFIG_SCHED_HPWORKPRIORITY=249
|
||||||
|
CONFIG_SCHED_HPWORKSTACKSIZE=1280
|
||||||
|
CONFIG_SCHED_INSTRUMENTATION=y
|
||||||
|
CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
|
||||||
|
CONFIG_SCHED_LPWORK=y
|
||||||
|
CONFIG_SCHED_LPWORKPRIORITY=50
|
||||||
|
CONFIG_SCHED_LPWORKSTACKSIZE=1632
|
||||||
|
CONFIG_SCHED_WAITPID=y
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
CONFIG_SEM_NNESTPRIO=8
|
||||||
|
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||||
|
CONFIG_SERIAL_TERMIOS=y
|
||||||
|
CONFIG_SIG_DEFAULT=y
|
||||||
|
CONFIG_SIG_SIGALRM_ACTION=y
|
||||||
|
CONFIG_SIG_SIGUSR1_ACTION=y
|
||||||
|
CONFIG_SIG_SIGUSR2_ACTION=y
|
||||||
|
CONFIG_SIG_SIGWORK=4
|
||||||
|
CONFIG_STACK_COLORATION=y
|
||||||
|
CONFIG_START_DAY=30
|
||||||
|
CONFIG_START_MONTH=11
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=32
|
||||||
|
CONFIG_STM32_ADC1=y
|
||||||
|
CONFIG_STM32_BBSRAM=y
|
||||||
|
CONFIG_STM32_BBSRAM_FILES=5
|
||||||
|
CONFIG_STM32_BKPSRAM=y
|
||||||
|
CONFIG_STM32_CCMDATARAM=y
|
||||||
|
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
|
||||||
|
CONFIG_STM32_DMA1=y
|
||||||
|
CONFIG_STM32_DMA2=y
|
||||||
|
CONFIG_STM32_FLASH_PREFETCH=y
|
||||||
|
CONFIG_STM32_FLOWCONTROL_BROKEN=y
|
||||||
|
CONFIG_STM32_I2C2=y
|
||||||
|
CONFIG_STM32_I2CTIMEOMS=10
|
||||||
|
CONFIG_STM32_I2CTIMEOTICKS=10
|
||||||
|
CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||||
|
CONFIG_STM32_OTGFS=y
|
||||||
|
CONFIG_STM32_PWR=y
|
||||||
|
CONFIG_STM32_RTC=y
|
||||||
|
CONFIG_STM32_RTC_HSECLOCK=y
|
||||||
|
CONFIG_STM32_RTC_MAGIC_REG=1
|
||||||
|
CONFIG_STM32_SAVE_CRASHDUMP=y
|
||||||
|
CONFIG_STM32_SDIO=y
|
||||||
|
CONFIG_STM32_SDIO_CARD=y
|
||||||
|
CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
|
||||||
|
CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
|
||||||
|
CONFIG_STM32_SPI1=y
|
||||||
|
CONFIG_STM32_SPI1_DMA=y
|
||||||
|
CONFIG_STM32_SPI1_DMA_BUFFER=1024
|
||||||
|
CONFIG_STM32_SPI2=y
|
||||||
|
CONFIG_STM32_SPI2_DMA=y
|
||||||
|
CONFIG_STM32_SPI3=y
|
||||||
|
CONFIG_STM32_SPI_DMA=y
|
||||||
|
CONFIG_STM32_SPI_DMATHRESHOLD=8
|
||||||
|
CONFIG_STM32_TIM1=y
|
||||||
|
CONFIG_STM32_TIM5=y
|
||||||
|
CONFIG_STM32_UART4=y
|
||||||
|
CONFIG_STM32_USART1=y
|
||||||
|
CONFIG_STM32_USART6=y
|
||||||
|
CONFIG_STM32_USART_BREAKS=y
|
||||||
|
CONFIG_STM32_USART_SINGLEWIRE=y
|
||||||
|
CONFIG_STM32_WWDG=y
|
||||||
|
CONFIG_SYSTEM_CDCACM=y
|
||||||
|
CONFIG_SYSTEM_NSH=y
|
||||||
|
CONFIG_TASK_NAME_SIZE=24
|
||||||
|
CONFIG_UART4_BAUD=57600
|
||||||
|
CONFIG_UART4_RXBUFSIZE=300
|
||||||
|
# CONFIG_UART4_RXDMA=y # works only without DShot
|
||||||
|
CONFIG_UART4_TXBUFSIZE=900
|
||||||
|
CONFIG_USART1_RXBUFSIZE=300
|
||||||
|
CONFIG_USART1_RXDMA=y
|
||||||
|
CONFIG_USART1_TXBUFSIZE=300
|
||||||
|
CONFIG_USART6_BAUD=57600
|
||||||
|
CONFIG_USART6_RXBUFSIZE=300
|
||||||
|
CONFIG_USART6_RXDMA=y
|
||||||
|
CONFIG_USART6_TXBUFSIZE=300
|
||||||
|
CONFIG_USBDEV=y
|
||||||
|
CONFIG_USBDEV_BUSPOWERED=y
|
||||||
|
CONFIG_USBDEV_MAXPOWER=500
|
||||||
|
CONFIG_USEC_PER_TICK=1000
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2944
|
||||||
|
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||||
@@ -0,0 +1,138 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/omnibus-f4sd/scripts/ld.script
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* The STM32F405RG has 1024Kb of FLASH beginning at address 0x0800:0000 and
|
||||||
|
* 192Kb of SRAM. SRAM is split up into three blocks:
|
||||||
|
*
|
||||||
|
* 1) 112Kb of SRAM beginning at address 0x2000:0000
|
||||||
|
* 2) 16Kb of SRAM beginning at address 0x2001:c000
|
||||||
|
* 3) 64Kb of CCM SRAM beginning at address 0x1000:0000
|
||||||
|
*
|
||||||
|
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||||
|
* where the code expects to begin execution by jumping to the entry point in
|
||||||
|
* the 0x0800:0000 address range.
|
||||||
|
*
|
||||||
|
* The first 16 KiB of flash is reserved for the bootloader.
|
||||||
|
* Paramater storage will use the next 16KiB Sector.
|
||||||
|
*/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
flash (rx) : ORIGIN = 0x08008000, LENGTH = 992K
|
||||||
|
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||||
|
ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
|
||||||
|
ENTRY(__start) /* treat __start as the anchor for dead code stripping */
|
||||||
|
EXTERN(_vectors) /* force the vectors to be included in the output */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Ensure that abort() is present in the final object. The exception handling
|
||||||
|
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
|
||||||
|
*/
|
||||||
|
EXTERN(abort)
|
||||||
|
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text : {
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.vectors)
|
||||||
|
*(.text .text.*)
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata .rodata.*)
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.got)
|
||||||
|
*(.gcc_except_table)
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Init functions (static constructors and the like)
|
||||||
|
*/
|
||||||
|
.init_section : {
|
||||||
|
_sinit = ABSOLUTE(.);
|
||||||
|
KEEP(*(.init_array .init_array.*))
|
||||||
|
_einit = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
*(.ARM.extab*)
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
__exidx_start = ABSOLUTE(.);
|
||||||
|
.ARM.exidx : {
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
} > flash
|
||||||
|
__exidx_end = ABSOLUTE(.);
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.);
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data .data.*)
|
||||||
|
*(.gnu.linkonce.d.*)
|
||||||
|
CONSTRUCTORS
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
} > sram AT > flash
|
||||||
|
|
||||||
|
.bss : {
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss .bss.*)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > sram
|
||||||
|
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
@@ -0,0 +1,50 @@
|
|||||||
|
############################################################################
|
||||||
|
#
|
||||||
|
# Copyright (c) 2018 PX4 Development Team. All rights reserved.
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name PX4 nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
add_library(drivers_board
|
||||||
|
i2c.cpp
|
||||||
|
init.c
|
||||||
|
led.c
|
||||||
|
spi.cpp
|
||||||
|
timer_config.cpp
|
||||||
|
usb.c
|
||||||
|
)
|
||||||
|
|
||||||
|
target_link_libraries(drivers_board
|
||||||
|
PRIVATE
|
||||||
|
arch_spi
|
||||||
|
drivers__led # drv_led_start
|
||||||
|
nuttx_arch # sdio
|
||||||
|
nuttx_drivers # sdio
|
||||||
|
px4_layer
|
||||||
|
)
|
||||||
@@ -0,0 +1,204 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
*
|
||||||
|
* Copyright (c) 2018, 2014 PX4 Development Team. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @file board_config.h
|
||||||
|
*
|
||||||
|
* boards internal definitions
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/****************************************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************************************/
|
||||||
|
|
||||||
|
#include <px4_platform_common/px4_config.h>
|
||||||
|
#include <nuttx/compiler.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
/****************************************************************************************************
|
||||||
|
* Definitions
|
||||||
|
****************************************************************************************************/
|
||||||
|
/* Configuration ************************************************************************************/
|
||||||
|
|
||||||
|
/* omnibusf4sd GPIOs ***********************************************************************************/
|
||||||
|
/* LEDs */
|
||||||
|
// power - green
|
||||||
|
// LED1 - PB5 - blue
|
||||||
|
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN5)
|
||||||
|
#define GPIO_LED_BLUE GPIO_LED1
|
||||||
|
|
||||||
|
#define BOARD_OVERLOAD_LED LED_BLUE
|
||||||
|
|
||||||
|
#define FLASH_BASED_PARAMS
|
||||||
|
|
||||||
|
/*
|
||||||
|
* ADC channels
|
||||||
|
*
|
||||||
|
* These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
|
||||||
|
*/
|
||||||
|
#define ADC_CHANNELS (1 << 0) | (1 << 11) | (1 << 12)
|
||||||
|
|
||||||
|
#define ADC_BATTERY_VOLTAGE_CHANNEL 11
|
||||||
|
#define ADC_BATTERY_CURRENT_CHANNEL 13
|
||||||
|
#define ADC_RC_RSSI_CHANNEL 12
|
||||||
|
|
||||||
|
/* Define Battery 1 Voltage Divider and A per V
|
||||||
|
*/
|
||||||
|
#define BOARD_BATTERY1_V_DIV (11.12f)
|
||||||
|
#define BOARD_BATTERY1_A_PER_V (31.f)
|
||||||
|
|
||||||
|
/* User GPIOs
|
||||||
|
*
|
||||||
|
* GPIO0-5 are the PWM servo outputs.
|
||||||
|
* GPIO_TIM3_CH3OUT GPIO_TIM3_CH3OUT_1 //PB0 S1_OUT D1_ST7
|
||||||
|
* GPIO_TIM3_CH4OUT GPIO_TIM3_CH4OUT_1 //PB1 S2_OUT D1_ST2
|
||||||
|
* GPIO_TIM2_CH4OUT GPIO_TIM2_CH4OUT_1 //PA3 S3_OUT D1_ST6
|
||||||
|
* GPIO_TIM2_CH3OUT GPIO_TIM2_CH3OUT_1 //PA2 S4_OUT D1_ST1
|
||||||
|
* GPIO_TIM5_CH2OUT GPIO_TIM5_CH2OUT_1 //PA1 S5_OUT
|
||||||
|
* GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_1 //PA8 S6_OUT
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define _MK_GPIO_INPUT(def) (((def) & (GPIO_PORT_MASK | GPIO_PIN_MASK)) | (GPIO_INPUT|GPIO_PULLUP))
|
||||||
|
|
||||||
|
#define GPIO_GPIO0_INPUT _MK_GPIO_INPUT(GPIO_TIM3_CH3IN)
|
||||||
|
#define GPIO_GPIO1_INPUT _MK_GPIO_INPUT(GPIO_TIM3_CH4IN)
|
||||||
|
#define GPIO_GPIO2_INPUT _MK_GPIO_INPUT(GPIO_TIM2_CH3IN)
|
||||||
|
#define GPIO_GPIO3_INPUT _MK_GPIO_INPUT(GPIO_TIM2_CH4IN)
|
||||||
|
//#define GPIO_GPIO4_INPUT _MK_GPIO_INPUT(GPIO_TIM5_CH2IN)
|
||||||
|
//#define GPIO_GPIO5_INPUT _MK_GPIO_INPUT(GPIO_TIM1_CH1IN)
|
||||||
|
|
||||||
|
#define _MK_GPIO_OUTPUT(def) (((def) & (GPIO_PORT_MASK | GPIO_PIN_MASK)) | (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR))
|
||||||
|
|
||||||
|
#define GPIO_GPIO0_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM3_CH3OUT)
|
||||||
|
#define GPIO_GPIO1_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM3_CH4OUT)
|
||||||
|
#define GPIO_GPIO2_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM2_CH3OUT)
|
||||||
|
#define GPIO_GPIO3_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM2_CH4OUT)
|
||||||
|
//#define GPIO_GPIO4_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM5_CH2OUT)
|
||||||
|
//#define GPIO_GPIO5_OUTPUT _MK_GPIO_OUTPUT(GPIO_TIM1_CH1OUT)
|
||||||
|
|
||||||
|
/* USB OTG FS
|
||||||
|
*
|
||||||
|
* PA9 OTG_FS_VBUS VBUS sensing
|
||||||
|
*/
|
||||||
|
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTC|GPIO_PIN5)
|
||||||
|
|
||||||
|
/* PWM
|
||||||
|
*
|
||||||
|
* Alternatively CH3/CH4 could be assigned to UART6_TX/RX
|
||||||
|
*/
|
||||||
|
#define DIRECT_PWM_OUTPUT_CHANNELS 4
|
||||||
|
#define DIRECT_INPUT_TIMER_CHANNELS 4
|
||||||
|
|
||||||
|
// Has pwm outputs
|
||||||
|
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
|
||||||
|
|
||||||
|
/* High-resolution timer */
|
||||||
|
#define HRT_TIMER 4 // T4C1
|
||||||
|
#define HRT_TIMER_CHANNEL 1 // use capture/compare channel 1
|
||||||
|
|
||||||
|
#define HRT_PPM_CHANNEL 3 // capture/compare channel 3
|
||||||
|
#define GPIO_PPM_IN (GPIO_ALT|GPIO_AF2|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN8)
|
||||||
|
|
||||||
|
#define RC_SERIAL_PORT "/dev/ttyS0"
|
||||||
|
#define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT
|
||||||
|
|
||||||
|
/*
|
||||||
|
* One RC_IN
|
||||||
|
*
|
||||||
|
* GPIO PPM_IN on PB8 T4CH3
|
||||||
|
* SPEKTRUM_RX (it's TX or RX in Bind) on PA10 UART1
|
||||||
|
* The FMU can drive GPIO PPM_IN as an output
|
||||||
|
*/
|
||||||
|
// TODO?
|
||||||
|
//#define GPIO_PPM_IN_AS_OUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN6)
|
||||||
|
//#define SPEKTRUM_RX_AS_GPIO_OUTPUT() px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
|
||||||
|
//#define SPEKTRUM_RX_AS_UART() px4_arch_configgpio(GPIO_USART1_RX)
|
||||||
|
//#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
|
||||||
|
|
||||||
|
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
|
||||||
|
|
||||||
|
/* This board provides a DMA pool and APIs */
|
||||||
|
#define BOARD_DMA_ALLOC_POOL_SIZE 5120
|
||||||
|
|
||||||
|
#define BOARD_HAS_ON_RESET 1
|
||||||
|
|
||||||
|
#define BOARD_ENABLE_CONSOLE_BUFFER
|
||||||
|
#define BOARD_CONSOLE_BUFFER_SIZE (1024*2)
|
||||||
|
|
||||||
|
|
||||||
|
__BEGIN_DECLS
|
||||||
|
|
||||||
|
/****************************************************************************************************
|
||||||
|
* Public Types
|
||||||
|
****************************************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************************************
|
||||||
|
* Public data
|
||||||
|
****************************************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __ASSEMBLY__
|
||||||
|
|
||||||
|
/****************************************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************************************
|
||||||
|
* Name: stm32_spiinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
|
||||||
|
*
|
||||||
|
****************************************************************************************************/
|
||||||
|
|
||||||
|
extern void stm32_spiinitialize(void);
|
||||||
|
|
||||||
|
|
||||||
|
/****************************************************************************************************
|
||||||
|
* Name: stm32_usbinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Called to configure USB IO.
|
||||||
|
*
|
||||||
|
****************************************************************************************************/
|
||||||
|
|
||||||
|
extern void stm32_usbinitialize(void);
|
||||||
|
|
||||||
|
extern void board_peripheral_reset(int ms);
|
||||||
|
|
||||||
|
#include <px4_platform_common/board_common.h>
|
||||||
|
|
||||||
|
#endif /* __ASSEMBLY__ */
|
||||||
|
|
||||||
|
__END_DECLS
|
||||||
@@ -0,0 +1,38 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
*
|
||||||
|
* Copyright (C) 2020 PX4 Development Team. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <px4_arch/i2c_hw_description.h>
|
||||||
|
|
||||||
|
constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
|
||||||
|
initI2CBusExternal(2),
|
||||||
|
};
|
||||||
@@ -0,0 +1,343 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
*
|
||||||
|
* Copyright (c) 2012-2018 PX4 Development Team. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @file init.c
|
||||||
|
*
|
||||||
|
* mambaf405mk2-specific early startup code. This file implements the
|
||||||
|
* board_app_initialize() function that is called early by nsh during startup.
|
||||||
|
*
|
||||||
|
* Code here is run before the rcS script is invoked; it should start required
|
||||||
|
* subsystems and perform board-specific initialization.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <px4_platform_common/px4_config.h>
|
||||||
|
#include <px4_platform_common/tasks.h>
|
||||||
|
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include <debug.h>
|
||||||
|
#include <errno.h>
|
||||||
|
#include <syslog.h>
|
||||||
|
|
||||||
|
#include <nuttx/board.h>
|
||||||
|
#include <nuttx/spi/spi.h>
|
||||||
|
#include <nuttx/i2c/i2c_master.h>
|
||||||
|
#include <nuttx/mmcsd.h>
|
||||||
|
#include <nuttx/analog/adc.h>
|
||||||
|
#include <nuttx/mm/gran.h>
|
||||||
|
|
||||||
|
#include <stm32.h>
|
||||||
|
#include "board_config.h"
|
||||||
|
#include <stm32_uart.h>
|
||||||
|
|
||||||
|
#include <arch/board/board.h>
|
||||||
|
|
||||||
|
#include <drivers/drv_hrt.h>
|
||||||
|
#include <drivers/drv_board_led.h>
|
||||||
|
|
||||||
|
#include <systemlib/px4_macros.h>
|
||||||
|
|
||||||
|
#include <px4_arch/io_timer.h>
|
||||||
|
#include <px4_platform_common/init.h>
|
||||||
|
#include <px4_platform/board_dma_alloc.h>
|
||||||
|
|
||||||
|
# if defined(FLASH_BASED_PARAMS)
|
||||||
|
# include <parameters/flashparams/flashfs.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-Processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Ideally we'd be able to get these from arm_internal.h,
|
||||||
|
* but since we want to be able to disable the NuttX use
|
||||||
|
* of leds for system indication at will and there is no
|
||||||
|
* separate switch, we need to build independent of the
|
||||||
|
* CONFIG_ARCH_LEDS configuration switch.
|
||||||
|
*/
|
||||||
|
__BEGIN_DECLS
|
||||||
|
extern void led_init(void);
|
||||||
|
extern void led_on(int led);
|
||||||
|
extern void led_off(int led);
|
||||||
|
__END_DECLS
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Protected Functions
|
||||||
|
****************************************************************************/
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: board_peripheral_reset
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
__EXPORT void board_peripheral_reset(int ms)
|
||||||
|
{
|
||||||
|
UNUSED(ms);
|
||||||
|
}
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: board_on_reset
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Optionally provided function called on entry to board_system_reset
|
||||||
|
* It should perform any house keeping prior to the rest.
|
||||||
|
*
|
||||||
|
* status - 1 if resetting to boot loader
|
||||||
|
* 0 if just resetting
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
__EXPORT void board_on_reset(int status)
|
||||||
|
{
|
||||||
|
/* configure the GPIO pins to outputs and keep them low */
|
||||||
|
for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
|
||||||
|
px4_arch_configgpio(io_timer_channel_get_gpio_output(i));
|
||||||
|
}
|
||||||
|
|
||||||
|
/* On resets invoked from system (not boot) insure we establish a low
|
||||||
|
* output state (discharge the pins) on PWM pins before they become inputs.
|
||||||
|
*/
|
||||||
|
|
||||||
|
if (status >= 0) {
|
||||||
|
up_mdelay(400);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: stm32_boardinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* All STM32 architectures must provide the following entry point. This entry point
|
||||||
|
* is called early in the initialization -- after all memory has been configured
|
||||||
|
* and mapped but before any devices have been initialized.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
__EXPORT void
|
||||||
|
stm32_boardinitialize(void)
|
||||||
|
{
|
||||||
|
/* Reset all PWM to Low outputs */
|
||||||
|
|
||||||
|
board_on_reset(-1);
|
||||||
|
|
||||||
|
/* configure LEDs */
|
||||||
|
board_autoled_initialize();
|
||||||
|
|
||||||
|
|
||||||
|
/* configure ADC pins */
|
||||||
|
stm32_configgpio(GPIO_ADC1_IN11); /* BATT_VOLTAGE_SENS */
|
||||||
|
stm32_configgpio(GPIO_ADC1_IN13); /* BATT_CURRENT_SENS */
|
||||||
|
stm32_configgpio(GPIO_ADC1_IN12); /* RSSI analog in (TX of UART4 instead) */
|
||||||
|
|
||||||
|
// TODO: power peripherals
|
||||||
|
///* configure power supply control/sense pins */
|
||||||
|
//stm32_configgpio(GPIO_PERIPH_3V3_EN);
|
||||||
|
//stm32_configgpio(GPIO_VDD_BRICK_VALID);
|
||||||
|
//stm32_configgpio(GPIO_VDD_USB_VALID);
|
||||||
|
|
||||||
|
// TODO: 3v3 Sensor?
|
||||||
|
///* Start with Sensor voltage off We will enable it
|
||||||
|
// * in board_app_initialize
|
||||||
|
// */
|
||||||
|
//stm32_configgpio(GPIO_VDD_3V3_SENSORS_EN);
|
||||||
|
|
||||||
|
// TODO: SBUS inversion? SPEK power?
|
||||||
|
//stm32_configgpio(GPIO_SBUS_INV);
|
||||||
|
//stm32_configgpio(GPIO_SPEKTRUM_PWR_EN);
|
||||||
|
|
||||||
|
// TODO: $$$ Unused?
|
||||||
|
//stm32_configgpio(GPIO_8266_GPIO0);
|
||||||
|
//stm32_configgpio(GPIO_8266_PD);
|
||||||
|
//stm32_configgpio(GPIO_8266_RST);
|
||||||
|
|
||||||
|
/* Safety - led don in led driver */
|
||||||
|
|
||||||
|
// TODO: unused?
|
||||||
|
//stm32_configgpio(GPIO_BTN_SAFETY);
|
||||||
|
|
||||||
|
// TODO: RSSI
|
||||||
|
//stm32_configgpio(GPIO_RSSI_IN);
|
||||||
|
|
||||||
|
stm32_configgpio(GPIO_PPM_IN);
|
||||||
|
|
||||||
|
/* configure SPI all interfaces GPIO */
|
||||||
|
|
||||||
|
stm32_spiinitialize();
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: board_app_initialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Perform application specific initialization. This function is never
|
||||||
|
* called directly from application code, but only indirectly via the
|
||||||
|
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
|
||||||
|
*
|
||||||
|
* Input Parameters:
|
||||||
|
* arg - The boardctl() argument is passed to the board_app_initialize()
|
||||||
|
* implementation without modification. The argument has no
|
||||||
|
* meaning to NuttX; the meaning of the argument is a contract
|
||||||
|
* between the board-specific initalization logic and the the
|
||||||
|
* matching application logic. The value cold be such things as a
|
||||||
|
* mode enumeration value, a set of DIP switch switch settings, a
|
||||||
|
* pointer to configuration data read from a file or serial FLASH,
|
||||||
|
* or whatever you would like to do with it. Every implementation
|
||||||
|
* should accept zero/NULL as a default configuration.
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* Zero (OK) is returned on success; a negated errno value is returned on
|
||||||
|
* any failure to indicate the nature of the failure.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
static struct spi_dev_s *spi1;
|
||||||
|
static struct spi_dev_s *spi2;
|
||||||
|
static struct spi_dev_s *spi3;
|
||||||
|
|
||||||
|
__EXPORT int board_app_initialize(uintptr_t arg)
|
||||||
|
{
|
||||||
|
px4_platform_init();
|
||||||
|
|
||||||
|
/* configure the DMA allocator */
|
||||||
|
|
||||||
|
if (board_dma_alloc_init() < 0) {
|
||||||
|
syslog(LOG_ERR, "DMA alloc FAILED\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
#if defined(SERIAL_HAVE_RXDMA)
|
||||||
|
// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
|
||||||
|
static struct hrt_call serial_dma_call;
|
||||||
|
hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* initial LED state */
|
||||||
|
drv_led_start();
|
||||||
|
led_off(LED_BLUE);
|
||||||
|
|
||||||
|
if (board_hardfault_init(2, true) != 0) {
|
||||||
|
led_on(LED_BLUE);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* Configure SPI-based devices */
|
||||||
|
|
||||||
|
// SPI1: MPU6000
|
||||||
|
spi1 = stm32_spibus_initialize(1);
|
||||||
|
|
||||||
|
if (!spi1) {
|
||||||
|
syslog(LOG_ERR, "[boot] FAILED to initialize SPI port 1\n");
|
||||||
|
led_on(LED_BLUE);
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Default SPI1 to 1MHz and de-assert the known chip selects. */
|
||||||
|
SPI_SETFREQUENCY(spi1, 10000000);
|
||||||
|
SPI_SETBITS(spi1, 8);
|
||||||
|
SPI_SETMODE(spi1, SPIDEV_MODE3);
|
||||||
|
up_udelay(20);
|
||||||
|
|
||||||
|
// SPI2: SDCard
|
||||||
|
/* Get the SPI port for the microSD slot */
|
||||||
|
spi2 = stm32_spibus_initialize(CONFIG_NSH_MMCSDSPIPORTNO);
|
||||||
|
|
||||||
|
if (!spi2) {
|
||||||
|
syslog(LOG_ERR, "[boot] FAILED to initialize SPI port %d\n", CONFIG_NSH_MMCSDSPIPORTNO);
|
||||||
|
led_on(LED_BLUE);
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Now bind the SPI interface to the MMCSD driver */
|
||||||
|
int result = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, spi2);
|
||||||
|
|
||||||
|
if (result != OK) {
|
||||||
|
led_on(LED_BLUE);
|
||||||
|
syslog(LOG_ERR, "[boot] FAILED to bind SPI port 2 to the MMCSD driver\n");
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
up_udelay(20);
|
||||||
|
|
||||||
|
|
||||||
|
// SPI3: OSD / Baro
|
||||||
|
spi3 = stm32_spibus_initialize(3);
|
||||||
|
|
||||||
|
if (!spi3) {
|
||||||
|
syslog(LOG_ERR, "[boot] FAILED to initialize SPI port 3\n");
|
||||||
|
led_on(LED_BLUE);
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Copied from fmu-v4
|
||||||
|
* Default SPI3 to 12MHz and de-assert the known chip selects.
|
||||||
|
* MS5611 has max SPI clock speed of 20MHz
|
||||||
|
*/
|
||||||
|
|
||||||
|
// BMP280 max SPI speed is 10 MHz
|
||||||
|
SPI_SETFREQUENCY(spi3, 10 * 1000 * 1000);
|
||||||
|
SPI_SETBITS(spi3, 8);
|
||||||
|
SPI_SETMODE(spi3, SPIDEV_MODE3);
|
||||||
|
up_udelay(20);
|
||||||
|
|
||||||
|
#if defined(FLASH_BASED_PARAMS)
|
||||||
|
static sector_descriptor_t params_sector_map[] = {
|
||||||
|
{1, 16 * 1024, 0x08004000},
|
||||||
|
{0, 0, 0},
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Initialize the flashfs layer to use heap allocated memory */
|
||||||
|
result = parameter_flashfs_init(params_sector_map, NULL, 0);
|
||||||
|
|
||||||
|
if (result != OK) {
|
||||||
|
syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
|
||||||
|
led_on(LED_AMBER);
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Configure the HW based on the manifest */
|
||||||
|
|
||||||
|
px4_platform_configure();
|
||||||
|
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
@@ -0,0 +1,120 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
*
|
||||||
|
* Copyright (c) 2018 PX4 Development Team. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @file led.c
|
||||||
|
*
|
||||||
|
* omnibusf4sd LED backend.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <px4_platform_common/px4_config.h>
|
||||||
|
|
||||||
|
#include <stdbool.h>
|
||||||
|
|
||||||
|
#include "stm32.h"
|
||||||
|
#include "board_config.h"
|
||||||
|
|
||||||
|
#include <nuttx/board.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Ideally we'd be able to get these from arm_internal.h,
|
||||||
|
* but since we want to be able to disable the NuttX use
|
||||||
|
* of leds for system indication at will and there is no
|
||||||
|
* separate switch, we need to build independent of the
|
||||||
|
* CONFIG_ARCH_LEDS configuration switch.
|
||||||
|
*/
|
||||||
|
__BEGIN_DECLS
|
||||||
|
extern void led_init(void);
|
||||||
|
extern void led_on(int led);
|
||||||
|
extern void led_off(int led);
|
||||||
|
extern void led_toggle(int led);
|
||||||
|
__END_DECLS
|
||||||
|
|
||||||
|
static uint32_t g_ledmap[] = {
|
||||||
|
GPIO_LED_BLUE,
|
||||||
|
};
|
||||||
|
|
||||||
|
__EXPORT void led_init(void)
|
||||||
|
{
|
||||||
|
/* Configure LED GPIOs for output */
|
||||||
|
for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
|
||||||
|
stm32_configgpio(g_ledmap[l]);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void phy_set_led(int led, bool state)
|
||||||
|
{
|
||||||
|
/* Pull Down to switch on */
|
||||||
|
if (led == 0) {
|
||||||
|
stm32_gpiowrite(g_ledmap[led], !state);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
__EXPORT void led_on(int led)
|
||||||
|
{
|
||||||
|
phy_set_led(led, true);
|
||||||
|
}
|
||||||
|
|
||||||
|
__EXPORT void led_off(int led)
|
||||||
|
{
|
||||||
|
phy_set_led(led, false);
|
||||||
|
}
|
||||||
|
|
||||||
|
__EXPORT void led_toggle(int led)
|
||||||
|
{
|
||||||
|
if (led == 0) {
|
||||||
|
phy_set_led(led, !stm32_gpioread(g_ledmap[led]));
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
__EXPORT void board_autoled_initialize(void)
|
||||||
|
{
|
||||||
|
/* Configure LED1 GPIO for output */
|
||||||
|
stm32_configgpio(GPIO_LED1);
|
||||||
|
}
|
||||||
|
|
||||||
|
__EXPORT void board_autoled_on(int led)
|
||||||
|
{
|
||||||
|
if (led == 1) {
|
||||||
|
/* Pull down to switch on */
|
||||||
|
stm32_gpiowrite(GPIO_LED1, false);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
__EXPORT void board_autoled_off(int led)
|
||||||
|
{
|
||||||
|
if (led == 1) {
|
||||||
|
/* Pull up to switch off */
|
||||||
|
stm32_gpiowrite(GPIO_LED1, true);
|
||||||
|
}
|
||||||
|
}
|
||||||
@@ -0,0 +1,51 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 PX4 Development Team. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <px4_arch/spi_hw_description.h>
|
||||||
|
#include <drivers/drv_sensor.h>
|
||||||
|
#include <nuttx/spi/spi.h>
|
||||||
|
|
||||||
|
constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
|
||||||
|
initSPIBus(SPI::Bus::SPI1, {
|
||||||
|
initSPIDevice(DRV_IMU_DEVTYPE_MPU6000, SPI::CS{GPIO::PortA, GPIO::Pin4}),
|
||||||
|
initSPIDevice(DRV_IMU_DEVTYPE_ICM20602, SPI::CS{GPIO::PortA, GPIO::Pin4}),
|
||||||
|
}),
|
||||||
|
initSPIBus(SPI::Bus::SPI2, {
|
||||||
|
initSPIDevice(DRV_OSD_DEVTYPE_ATXXXX, SPI::CS{GPIO::PortB, GPIO::Pin12}),
|
||||||
|
}),
|
||||||
|
initSPIBus(SPI::Bus::SPI3, {
|
||||||
|
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortB, GPIO::Pin3}),
|
||||||
|
}),
|
||||||
|
};
|
||||||
|
|
||||||
|
static constexpr bool unused = validateSPIConfig(px4_spi_buses);
|
||||||
@@ -0,0 +1,49 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 PX4 Development Team. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <px4_arch/io_timer_hw_description.h>
|
||||||
|
|
||||||
|
constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
|
||||||
|
initIOTimer(Timer::Timer3, DMA{DMA::Index1, DMA::Stream2, DMA::Channel5}),
|
||||||
|
initIOTimer(Timer::Timer2, DMA{DMA::Index1, DMA::Stream1, DMA::Channel3}),
|
||||||
|
};
|
||||||
|
|
||||||
|
constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
|
||||||
|
initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
|
||||||
|
initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
|
||||||
|
initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel3}, {GPIO::PortA, GPIO::Pin2}),
|
||||||
|
initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel4}, {GPIO::PortA, GPIO::Pin3}),
|
||||||
|
};
|
||||||
|
|
||||||
|
constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
|
||||||
|
initIOTimerChannelMapping(io_timers, timer_io_channels);
|
||||||
@@ -0,0 +1,107 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 PX4 Development Team. All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @file usb.c
|
||||||
|
*
|
||||||
|
* Board-specific USB functions.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Included Files
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#include <px4_platform_common/px4_config.h>
|
||||||
|
|
||||||
|
#include <sys/types.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <nuttx/usb/usbdev.h>
|
||||||
|
#include <nuttx/usb/usbdev_trace.h>
|
||||||
|
|
||||||
|
#include <arm_arch.h>
|
||||||
|
#include <stm32.h>
|
||||||
|
#include "board_config.h"
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Definitions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: stm32_usbinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Called to setup USB-related GPIO pins for the omnibusf4sd board.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
__EXPORT void stm32_usbinitialize(void)
|
||||||
|
{
|
||||||
|
/* The OTG FS has an internal soft pull-up */
|
||||||
|
|
||||||
|
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
|
||||||
|
|
||||||
|
#ifdef CONFIG_STM32_OTGFS
|
||||||
|
stm32_configgpio(GPIO_OTGFS_VBUS);
|
||||||
|
/* XXX We only support device mode
|
||||||
|
stm32_configgpio(GPIO_OTGFS_PWRON);
|
||||||
|
stm32_configgpio(GPIO_OTGFS_OVER);
|
||||||
|
*/
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: stm32_usbsuspend
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
|
||||||
|
* used. This function is called whenever the USB enters or leaves suspend mode.
|
||||||
|
* This is an opportunity for the board logic to shutdown clocks, power, etc.
|
||||||
|
* while the USB is suspended.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
|
||||||
|
{
|
||||||
|
uinfo("resume: %d\n", resume);
|
||||||
|
}
|
||||||
Reference in New Issue
Block a user