docs(i18n): PX4 guide translations (Crowdin) - ko (#26849)

Co-authored-by: Crowdin Bot <support+bot@crowdin.com>

docs/ko/frames_vtol/vtol_quadplane_foxtech_loong_2160.md

@@ -270,7 +270,7 @@ MAIN:
 4. Aileron left
 5. Elevator right
 6. Elevator left
-7. 방향타
+7. Rudder
 
 AUX:
 

docs/ko/frames_vtol/vtol_quadplane_fun_cub_vtol_pixhawk.md

@@ -51,10 +51,10 @@ For example, you might wire it up like this example (orientation as if "sitting
 | MAIN 3 | 전방 좌측 모터(시계 방향)  |
 | MAIN 4 | 후방 우측 모터(시계 방향)  |
 | AUX 1  | 좌측 보조익 TODO                         |
-| AUX 2  | 우측 보조익                              |
-| AUX 3  | 승강타                                 |
-| AUX 4  | 방향타                                 |
-| AUX 5  | 스로틀                                 |
+| AUX 2  | Right aileron                       |
+| AUX 3  | Elevator                            |
+| AUX 4  | Rudder                              |
+| AUX 5  | Throttle                            |
 
 For further instructions on wiring and configurations please see:
 [Standard VTOL Wiring and Configuration](../config_vtol/vtol_quad_configuration.md). <!-- replace with Pixhawk Wiring Quickstart -->
@@ -69,7 +69,7 @@ For further instructions on wiring and configurations please see:
 
 3. The default parameters are often sufficient for stable flight. For more detailed tuning information see [Standard VTOL Wiring and Configuration](../config_vtol/vtol_quad_configuration.md).
 
-보정을 마치면 VTOL이 비행할 준비가 됩니다.
+After you finish calibration the VTOL is ready to fly.
 
 ## 비디오
 

docs/ko/frames_vtol/vtol_quadplane_volantex_ranger_ex_pixhawk.md

@@ -92,14 +92,14 @@ Pixhawk의 출력은 다음과 같이 연결되어야합니다 ( "평면에 앉
 | 포트     | 연결                     |
 | ------ | ---------------------- |
 | MAIN 1 | Front right motor, CCW |
-| MAIN 2 | 후방 촤즉 모터, 반시계 방향       |
-| MAIN 3 | 전방 좌측 모터, 시계방향         |
-| MAIN 4 | 후방 우측 모터, 시계 방향        |
-| AUX 1  | 좌측 보조익                 |
-| AUX 2  | 우측 보조익                 |
-| AUX 3  | 승강타                    |
-| AUX 4  | 방향타                    |
-| AUX 5  | 스로틀                    |
+| MAIN 2 | Back left motor, CCW   |
+| MAIN 3 | Front left motor, CW   |
+| MAIN 4 | Back right motor, CW   |
+| AUX 1  | Left aileron           |
+| AUX 2  | Right aileron          |
+| AUX 3  | Elevator               |
+| AUX 4  | Rudder                 |
+| AUX 5  | Throttle               |
 
 :::info
 The servo direction can be reversed using the PWM_REV parameters in the PWM_OUTPUT group of QGroundControl (cogwheel tab, last item in the left menu)