Fresh import of the PX4 firmware sources.

ROMFS/scripts/rcS

@@ -0,0 +1,120 @@
+#!nsh
+#
+# PX4FMU startup script.
+#
+# This script is responsible for:
+#
+# - mounting the microSD card (if present)
+# - running the user startup script from the microSD card (if present)
+# - detecting the configuration of the system and picking a suitable
+#   startup script to continue with
+#
+# Note: DO NOT add configuration-specific commands to this script;
+#       add them to the per-configuration scripts instead.
+#
+
+#
+# Default to auto-start mode.  An init script on the microSD card
+# can change this to prevent automatic startup of the flight script.
+#
+set MODE autostart
+set USB_ALLOWED yes
+set USB no
+
+#
+# Try to mount the microSD card.
+#
+echo "[init] looking for microSD..."
+if mount -t vfat /dev/mmcsd0 /fs/microsd
+then
+	echo "[init] card mounted at /fs/microsd"
+else
+	echo "[init] no microSD card found"
+fi
+
+#
+# Look for an init script on the microSD card.
+#
+# To prevent automatic startup in the current flight mode,
+# the script should set MODE to some other value.
+#
+if [ -f /fs/microsd/etc/rc ]
+then
+	echo "[init] reading /fs/microsd/etc/rc"
+	sh /fs/microsd/etc/rc
+fi
+
+#
+# Check for USB host
+#
+if [ $USB_ALLOWED == yes ]
+then
+	if sercon
+	then
+		echo "[init] USB interface connected"
+	fi
+fi
+
+#
+# If we are still in flight mode, work out what airframe 
+# configuration we have and start up accordingly.
+#
+if [ $MODE != autostart ]
+then
+	echo "[init] automatic startup cancelled by user script"
+else
+	echo "[init] detecting attached hardware..."
+
+	#
+	# Assume that we are PX4FMU in standalone mode
+	#
+	set BOARD PX4FMU
+
+	#
+	# Are we attached to a PX4IOAR (AR.Drone carrier board)?
+	#
+	if boardinfo -t 7
+	then
+		set BOARD PX4IOAR
+		if [ -f /etc/init.d/rc.PX4IOAR ]
+		then
+			echo "[init] reading /etc/init.d/rc.PX4IOAR"
+			sh /etc/init.d/rc.PX4IOAR
+		fi
+	else
+		echo "[init] PX4IOAR not detected"
+	fi
+
+	#
+	# Are we attached to a PX4IO?
+	#
+	if boardinfo -t 6
+	then
+		set BOARD PX4IO
+		if [ -f /etc/init.d/rc.PX4IO ]
+		then
+			echo "[init] reading /etc/init.d/rc.PX4IO"
+			sh /etc/init.d/rc.PX4IO
+		fi
+	else
+		echo "[init] PX4IO not detected"
+	fi
+
+	#
+	# Looks like we are stand-alone
+	#
+	if [ $BOARD == PX4FMU ]
+	then
+		echo "[init] no expansion board detected"
+		if [ -f /etc/init.d/rc.standalone ]
+		then
+			echo "[init] reading /etc/init.d/rc.standalone"
+			sh /etc/init.d/rc.standalone
+		fi
+	fi
+
+	#
+	# We may not reach here if the airframe-specific script exits the shell.
+	#
+	echo "[init] startup done."
+fi