Move PX4 Guide source into /docs (#24490)

* Add vitepress tree * Update existing workflows so they dont trigger on changes in the docs path * Add nojekyll, package.json, LICENCE etc * Add crowdin docs upload/download scripts * Add docs flaw checker workflows * Used docs prefix for docs workflows * Crowdin obvious fixes * ci: docs move to self hosted runner runs on a beefy server for faster builds Signed-off-by: Ramon Roche <mrpollo@gmail.com> * ci: don't run build action for docs or ci changes Signed-off-by: Ramon Roche <mrpollo@gmail.com> * ci: update runners Signed-off-by: Ramon Roche <mrpollo@gmail.com> * Add docs/en * Add docs assets and scripts * Fix up editlinks to point to PX4 sources * Download just the translations that are supported * Add translation sources for zh, uk, ko * Update latest tranlsation and uorb graphs * update vitepress to latest --------- Signed-off-by: Ramon Roche <mrpollo@gmail.com> Co-authored-by: Ramon Roche <mrpollo@gmail.com>
2026-06-01 11:06:04 +08:00 · 2025-03-13 16:08:27 +11:00
parent 8e6d2ebe4a
commit 88d623bedb
5176 changed files with 558771 additions and 2 deletions
@@ -0,0 +1,66 @@
+# CUAV P8 Telemetry Radio
+
+CUAV P8 Radio is a long range (>60km) and high data rate (375 Kbps) remote data transmission module for drones that works plug-and-play with PX4.
+
+It supports multiple modes such as point-to-point, point-to-multipoint, and relay communication.
+
+![CUAV P8 Radio](../../assets/hardware/telemetry/cuav_p8_hero.png)
+
+## 주요 특징
+
+- Long range: >60km (depending on the antenna and environment, up to 100 km).
+- Supports point-to-point, point-to-multipoint, and repeater modes.
+- Up to 2W power (fixed frequency 2W; frequency hopping 1W)
+- Up to 345 Kbps transfer rate.
+- Supports 12v~60V operating voltage.
+- Unit can operate either as ground station modem or aircraft modem.
+- Independent power supply for more stable operation
+- USB Type-C port, integrated USB to UART converter
+
+## 구매처
+
+- [CUAV store](https://www.cuav.net/en/p8-2/)
+- [CUAV alibaba](https://www.alibaba.com/product-detail/Free-shipping-CUAV-UAV-P8-Radio_1600324379418.html?spm=a2747.manage.0.0.2dca71d2bY4B0M)
+
+## PX4 설정
+
+The CUAV P8 Radio comes pre-configured (baud rate 57600, broadcast mode) for use with PX4.
+It should require no additional setup if connected to `TELEM1` OR `TELEM2`.
+
+On some flight controllers, or if used with a different serial port, you may need to [configure the port for MAVLink communication](../peripherals/mavlink_peripherals.md).
+
+:::tip
+[P8 Configuration](https://doc.cuav.net/data-transmission/p8-radio/en/config.html) provides full information about radio configuration, if required.
+:::
+
+## 핀배열
+
+![P8 pinouts](../../assets/hardware/telemetry/cuav_p8_pinouts.png)
+
+### Data Port
+
+| 핀 | C-RTK GPS 6P               | 핀 | Pixhawk standard pins |
+| - | -------------------------- | - | --------------------- |
+| 1 | 5V+(NC) | 1 | VCC                   |
+| 2 | RX                         | 2 | TX                    |
+| 3 | TX                         | 3 | RX                    |
+| 4 | RTS                        | 4 | RTS                   |
+| 5 | CTS                        | 5 | CTS                   |
+| 6 | GND                        | 6 | GND                   |
+
+## 배선
+
+![P8 wiring](../../assets/hardware/telemetry/cuav_p8_connect.png)
+
+Connect the CUAV P8 Radio to the `TELEM1`/`TELEM2` interface of the flight controller and use a battery or BEC to power the module.
+The required cables are included in the package.
+
+:::tip
+CUAV P8 Radio does not support power supply from the flight controller, it needs to be connected to a 12~60v battery or BEC.
+:::
+
+## More information
+
+[P8 manual](http://manual.cuav.net/data-transmission/p8-radio/p8-user-manual-en.pdf)
+
+[CUAV P8 Radio](https://doc.cuav.net/data-transmission/p8-radio/en/) (Official Guide)