Removed Power Module No connector version, included it in Power Module.

docs/en/power_module/ark_pab_power_module.md

@@ -3,14 +3,18 @@
 The [ARK PAB Power Module](https://arkelectron.gitbook.io/ark-documentation/power/ark-pab-power-module) is an advanced power module rated for 60A continuous battery current at 20°C ambient.
 For higher continuous current needs, running multiple power modules in parallel is recommended.
 Note that at 60A and 20°C without cooling, the 5V regulator is de-rated to a 3A continuous output.
+This power module is available with and without connectors.
 
 ![ARK PAB Power Module](../../assets/hardware/power_module/ark_power_modules//ark_pab_power_module.jpg)
 
+![ARK PAB Power Module No Connector](../../assets/hardware/power_module/ark_power_modules//ark_pab_power_no_connector.jpg)
+
 ## Where to Buy
 
 Order this module from:
 
-- [ARK Electronics](https://arkelectron.com/product/ark-pab-power-module/) (US)
+- [ARK Electronics - ARK PAB Power Module](https://arkelectron.com/product/ark-pab-power-module/) (US)
+- [ARK Electronics - ARK PAB Power Module No Connector](https://arkelectron.com/product/ark-pab-power-module-no-connector/) (US)
 
 ## Hardware Specifications
 
@@ -28,8 +32,8 @@ Order this module from:
 
 - **Connections**
 
-  - XT60 Battery Input
+  - XT60 Battery Input / Solder Pad Battery Input (No Connector version)
-  - XT60 Battery Output
+  - XT60 Battery Output / Solder Pad Battery Output (No Connector version)
   - 6 Pin Molex CLIK-Mate Output
     - [Matches ARK PAB Carrier Power Pinout](https://arkelectron.gitbook.io/ark-documentation/flight-controllers/ark-pixhawk-autopilot-bus-carrier/pinout)
 

docs/en/power_module/ark_pab_power_module_no_connector.md

@@ -1,47 +0,0 @@
-# ARK PAB Power Module No Connector
-
-The [ARK PAB Power Module No Connector](https://arkelectron.gitbook.io/ark-documentation/power/ark-pab-power-module) is a 5V 6A power supply and digital power monitor designed for the Pixhawk Autopilot Bus Carrier boards.
-
-![ARK PAB Power Module No Connector](../../assets/hardware/power_module/ark_power_modules//ark_pab_power_no_connector.jpg)
-
-## Where to Buy
-
-Order this module from:
-
-- [ARK Electronics](https://arkelectron.com/product/ark-pab-power-module-no-connector/) (US)
-
-## Hardware Specifications
-
-- **TI INA226 Digital Power Monitor**
-  - 0.0005 Ohm Shunt
-  - I2C Interface
-
-- **5.2V 6A Step-Down Regulator**
-  - 33V Maximum Input Voltage
-  - 5.8V Minimum Input Voltage at 6A Out
-  - Output Over-Voltage Protection
-  - Output Over-Current Protection
-
-- **Connections**
-  - Solder Pad Battery Input
-  - Solder Pad Battery Output
-  - 6 Pin Molex CLIK-Mate Output
-    - [Matches ARK PAB Carrier Power Pinout](https://arkelectron.gitbook.io/ark-documentation/flight-controllers/ark-pixhawk-autopilot-bus-carrier/pinout)
-
-- **Other**
-  - USA Built
-  - FCC Compliant
-  - Includes 6 Pin Molex CLIK-Mate Cable
-
-- **Additional Information**
-  - Weight: 9.5 g
-  - Dimensions: 4.75 cm x 3.43 cm x 0.86 cm
-
-## PX4 Setup
-
-- Enable the [SENS_EN_INA226](../advanced_config/parameter_reference.md#SENS_EN_INA226) parameter if it not enabled.
-- Reboot the flight controller.
-
-## See Also
-
-- [ARK PAB Power Module No Connector Documentation](https://arkelectron.gitbook.io/ark-documentation/power/ark-pab-power-module) (ARK Docs)

docs/en/power_module/index.md

@@ -26,7 +26,6 @@ This section provides information about a number of power modules and power dist
   - [Sky-Drones SmartAP PDB](../power_module/sky-drones_smartap-pdb.md)
 - Digital (I2C) voltage and current power modules (for Pixhawk FMUv6X and FMUv5X derived controllers):
   - [ARK PAB Power Module](../power_module/ark_pab_power_module.md)
-  - [ARK PAB Power Module No Connector](../power_module/ark_pab_power_module_no_connector.md)
   - [ARK 12S PAB Power Module](../power_module/ark_12s_pab_power_module.md)
   - [ARK 12S Payload Power Module](../power_module/ark_12s_payload_power_module.md)
   - [Holybro PM02D](../power_module/holybro_pm02d.md)