boards: New target flywoo goku-gn-f405s-aio (#20131)

2026-06-02 03:49:12 +08:00 · 2022-09-16 06:11:49 +08:00
parent 3b9936edd2
commit 70194f52cd
19 changed files with 2446 additions and 0 deletions
@@ -0,0 +1,120 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2018 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file led.c
+ *
+ * gnf405s LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "stm32.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+
+/*
+ * Ideally we'd be able to get these from arm_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+extern void led_toggle(int led);
+__END_DECLS
+
+static uint32_t g_ledmap[] = {
+	GPIO_LED_BLUE,
+};
+
+__EXPORT void led_init(void)
+{
+	/* Configure LED GPIOs for output */
+	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
+		stm32_configgpio(g_ledmap[l]);
+	}
+}
+
+static void phy_set_led(int led, bool state)
+{
+	/* Pull Down to switch on */
+	if (led == 0) {
+		stm32_gpiowrite(g_ledmap[led], !state);
+	}
+}
+
+__EXPORT void led_on(int led)
+{
+	phy_set_led(led, true);
+}
+
+__EXPORT void led_off(int led)
+{
+	phy_set_led(led, false);
+}
+
+__EXPORT void led_toggle(int led)
+{
+	if (led == 0) {
+		phy_set_led(led, !stm32_gpioread(g_ledmap[led]));
+	}
+}
+
+__EXPORT void board_autoled_initialize(void)
+{
+	/* Configure LED1 GPIO for output */
+	stm32_configgpio(GPIO_LED1);
+}
+
+__EXPORT void board_autoled_on(int led)
+{
+	if (led == 1) {
+		/* Pull down to switch on */
+		stm32_gpiowrite(GPIO_LED1, false);
+	}
+}
+
+__EXPORT void board_autoled_off(int led)
+{
+	if (led == 1) {
+		/* Pull up to switch off */
+		stm32_gpiowrite(GPIO_LED1, true);
+	}
+}