Merge pull request #1509 from PX4/VTOL_startup_and_parameter_fix

Vtol startup and parameter fix

ROMFS/px4fmu_common/init.d/13001_caipirinha_vtol

@@ -9,8 +9,8 @@ sh /etc/init.d/rc.vtol_defaults
 
 set MIXER FMU_caipirinha_vtol
 
-set PWM_OUTPUTS 12
+set PWM_OUT 12
 set PWM_MAX 2000
 set PWM_RATE 400
-param set VTOL_MOT_COUNT 2
+param set VT_MOT_COUNT 2
-param set IDLE_PWM_MC  1080
+param set VT_IDLE_PWM_MC  1080

ROMFS/px4fmu_common/init.d/rc.vtol_defaults

@@ -2,7 +2,7 @@
 
 set VEHICLE_TYPE vtol
 
-if [ $DO_AUTOCONFIG == yes ]
+if [ $AUTOCNF == yes ]
 then
 	#
 	#Default controller parameters for MC

ROMFS/px4fmu_common/init.d/rcS

@@ -584,7 +584,7 @@ then
 		sh /etc/init.d/rc.interface
 
 		# Start standard vtol apps
-		if [ $LOAD_DEFAULT_APPS == yes ]
+		if [ $LOAD_DAPPS == yes ]
 		then
 			sh /etc/init.d/rc.vtol_apps
 		fi

src/modules/vtol_att_control/vtol_att_control_main.cpp

@@ -238,11 +238,11 @@ VtolAttitudeControl::VtolAttitudeControl() :
 	_params.idle_pwm_mc = PWM_LOWEST_MIN;
 	_params.vtol_motor_count = 0;
 
-	_params_handles.idle_pwm_mc = param_find("IDLE_PWM_MC");
+	_params_handles.idle_pwm_mc = param_find("VT_IDLE_PWM_MC");
-	_params_handles.vtol_motor_count = param_find("VTOL_MOT_COUNT");
+	_params_handles.vtol_motor_count = param_find("VT_MOT_COUNT");
-	_params_handles.mc_airspeed_min = param_find("VTOL_MC_AIRSPEED_MIN");
+	_params_handles.mc_airspeed_min = param_find("VT_MC_ARSPD_MIN");
-	_params_handles.mc_airspeed_max = param_find("VTOL_MC_AIRSPEED_MAX");
+	_params_handles.mc_airspeed_max = param_find("VT_MC_ARSPD_MAX");
-	_params_handles.mc_airspeed_trim = param_find("VTOL_MC_AIRSPEED_TRIM");
+	_params_handles.mc_airspeed_trim = param_find("VT_MC_ARSPD_TRIM");
 
 	/* fetch initial parameter values */
 	parameters_update();

src/modules/vtol_att_control/vtol_att_control_params.c

@@ -1,13 +1,88 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2014 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file vtol_att_control_params.c
+ * Parameters for vtol attitude controller.
+ *
+ * @author Roman Bapst <bapstr@ethz.ch>
+ */
+
 #include <systemlib/param/param.h>
 
-// number of engines
+/**
-PARAM_DEFINE_INT32(VTOL_MOT_COUNT,0);
+ * VTOL number of engines
-// idle pwm in multicopter mode
+ *
-PARAM_DEFINE_INT32(IDLE_PWM_MC,900);
+ * @min 1.0
-// min airspeed in multicopter mode
+ * @group VTOL Attitude Control
-PARAM_DEFINE_FLOAT(VTOL_MC_AIRSPEED_MIN,2);
+ */
-// max airspeed in multicopter mode
+PARAM_DEFINE_INT32(VT_MOT_COUNT,0);
-PARAM_DEFINE_FLOAT(VTOL_MC_AIRSPEED_MAX,30);
+
-// trim airspeed in multicopter mode
+/**
-PARAM_DEFINE_FLOAT(VTOL_MC_AIRSPEED_TRIM,10);
+ * Idle speed of VTOL when in multicopter mode
+ *
+ * @min 900
+ * @group VTOL Attitude Control
+ */
+PARAM_DEFINE_INT32(VT_IDLE_PWM_MC,900);
+
+/**
+ * Minimum airspeed in multicopter mode
+ *
+ * This is the minimum speed of the air flowing over the control surfaces.
+ *
+ * @min 0.0
+ * @group VTOL Attitude Control
+ */
+PARAM_DEFINE_FLOAT(VT_MC_ARSPD_MIN,2.0f);
+
+/**
+ * Maximum airspeed in multicopter mode
+ *
+ * This is the maximum speed of the air flowing over the control surfaces.
+ *
+ * @min 0.0
+ * @group VTOL Attitude Control
+ */
+PARAM_DEFINE_FLOAT(VT_MC_ARSPD_MAX,30.0f);
+
+/**
+ * Trim airspeed when in multicopter mode
+ *
+ * This is the airflow over the control surfaces for which no airspeed scaling is applied in multicopter mode.
+ *
+ * @min 0.0
+ * @group VTOL Attitude Control
+ */
+PARAM_DEFINE_FLOAT(VT_MC_ARSPD_TRIM,10.0f);