Mirrors_Framework/PX4-Autopilot
1
0
Fork 0
mirror of https://github.com/PX4/PX4-Autopilot.git synced 2026-05-27 02:06:27 +08:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

New Crowdin translations - zh-CN (#25483)

Browse Source 
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
This commit is contained in:
PX4 Build Bot
2025-09-11 08:29:25 +10:00
committed by GitHub
parent 472e0657b5
commit 2e84e55d93
123 changed files with 2858 additions and 2621 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/zh/config/airspeed.md
+5 -5
View File
@@ -27,18 +27,18 @@ To calibrate the airspeed sensor:
4. Click the **Airspeed** sensor button.
![Airspeed calibration](../../assets/qgc/setup/sensor/sensor_airspeed.jpg)
![Airspeed calibration](../../assets/qgc/setup/sensor/sensor_airspeed.jpg)
5. Shield the sensor from the wind (i.e. cup it with your hand).
Take care not to block any of its holes.
Take care not to block any of its holes.
6. Click **OK** to start the calibration.
7. Once asked for, blow into the tip of the pitot tube to signal the end of calibration.
:::tip
Blowing into the tube is also a basic check that the dynamic and static ports are installed correctly.
If they are swapped then the sensor will read a large negative differential pressure when you blow into the tube, and the calibration will abort with an error.
:::tip
Blowing into the tube is also a basic check that the dynamic and static ports are installed correctly.
If they are swapped then the sensor will read a large negative differential pressure when you blow into the tube, and the calibration will abort with an error.
:::