Add XMC4500 project.

Demo/CORTEX_M4F_Infineon_XMC4500_Keil/Dbg_Flash.ini

@@ -0,0 +1,2 @@
+_WDWORD(0xE0002008, 0x00000000);  // Clear FPB 0 (FP_COMP0)
+

Demo/CORTEX_M4F_Infineon_XMC4500_Keil/Dbg_RAM TraceETM.ini

@@ -0,0 +1,36 @@
+/*----------------------------------------------------------------------------
+ * Name:    Dbg_RAM.ini
+ * Purpose: RAM Debug Initialization File
+ * Note(s):
+ *----------------------------------------------------------------------------
+ * This file is part of the uVision/ARM development tools.
+ * This software may only be used under the terms of a valid, current,
+ * end user licence from KEIL for a compatible version of KEIL software
+ * development tools. Nothing else gives you the right to use this software.
+ *
+ * This software is supplied "AS IS" without warranties of any kind.
+ *
+ * Copyright (c) 2008-2011 Keil - An ARM Company. All rights reserved.
+ *----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------
+  Setup()  configure PC & SP for RAM Debug
+ *----------------------------------------------------------------------------*/
+FUNC void Setup (void) {
+  SP = _RDWORD(0x10000000);                          // Setup Stack Pointer
+  PC = _RDWORD(0x10000004);                          // Setup Program Counter
+  _WDWORD(0xE000ED08, 0x10000000);                   // Setup Vector Table Offset Register
+}
+
+_WDWORD(0x5000413C, 0x001F3700);                     // Enable RAM
+
+_WDWORD(0x48028674, 0x00001405);                     // Enable ETM Pins	P6
+
+_WDWORD(0x48028274, 0x00401405);                     // Enable ETM Pins	P2
+					 
+LOAD %L INCREMENTAL                                  // load the application
+
+Setup();                                             // Setup for Running
+
+/*g, main*/
+			 

Demo/CORTEX_M4F_Infineon_XMC4500_Keil/Dbg_RAM.ini

@@ -0,0 +1,32 @@
+/*----------------------------------------------------------------------------
+ * Name:    Dbg_RAM.ini
+ * Purpose: RAM Debug Initialization File
+ * Note(s):
+ *----------------------------------------------------------------------------
+ * This file is part of the uVision/ARM development tools.
+ * This software may only be used under the terms of a valid, current,
+ * end user licence from KEIL for a compatible version of KEIL software
+ * development tools. Nothing else gives you the right to use this software.
+ *
+ * This software is supplied "AS IS" without warranties of any kind.
+ *
+ * Copyright (c) 2008-2011 Keil - An ARM Company. All rights reserved.
+ *----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------
+  Setup()  configure PC & SP for RAM Debug
+ *----------------------------------------------------------------------------*/
+FUNC void Setup (void) {
+  SP = _RDWORD(0x10000000);                          // Setup Stack Pointer
+  PC = _RDWORD(0x10000004);                          // Setup Program Counter
+  _WDWORD(0xE000ED08, 0x10000000);                   // Setup Vector Table Offset Register
+}
+
+_WDWORD(0x5000413C, 0x001F3700);                     // Enable RAM
+ 
+LOAD %L INCREMENTAL                                  // load the application
+
+Setup();                                             // Setup for Running
+
+/*g, main*/
+			 

Demo/CORTEX_M4F_Infineon_XMC4500_Keil/FreeRTOSConfig.h

@@ -0,0 +1,149 @@
+/*
+    FreeRTOS V7.1.0 - Copyright (C) 2011 Real Time Engineers Ltd.
+
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+     *    Complete, revised, and edited pdf reference manuals are also       *
+     *    available.                                                         *
+     *                                                                       *
+     *    Purchasing FreeRTOS documentation will not only help you, by       *
+     *    ensuring you get running as quickly as possible and with an        *
+     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+     *    the FreeRTOS project to continue with its mission of providing     *
+     *    professional grade, cross platform, de facto standard solutions    *
+     *    for microcontrollers - completely free of charge!                  *
+     *                                                                       *
+     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+     *                                                                       *
+     *    Thank you for using FreeRTOS, and thank you for your support!      *
+     *                                                                       *
+    ***************************************************************************
+
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+    >>>NOTE<<< The modification to the GPL is included to allow you to
+    distribute a combined work that includes FreeRTOS without being obliged to
+    provide the source code for proprietary components outside of the FreeRTOS
+    kernel.  FreeRTOS is distributed in the hope that it will be useful, but
+    WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+    more details. You should have received a copy of the GNU General Public
+    License and the FreeRTOS license exception along with FreeRTOS; if not it
+    can be viewed here: http://www.freertos.org/a00114.html and also obtained
+    by writing to Richard Barry, contact details for whom are available on the
+    FreeRTOS WEB site.
+
+    1 tab == 4 spaces!
+
+    http://www.FreeRTOS.org - Documentation, latest information, license and
+    contact details.
+
+    http://www.SafeRTOS.com - A version that is certified for use in safety
+    critical systems.
+
+    http://www.OpenRTOS.com - Commercial support, development, porting,
+    licensing and training services.
+*/
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+#include <stdint.h>
+extern uint32_t SystemCoreClock;
+
+#define configUSE_PREEMPTION			1
+#define configUSE_IDLE_HOOK				0
+#define configUSE_TICK_HOOK				0
+#define configCPU_CLOCK_HZ				( SystemCoreClock )
+#define configTICK_RATE_HZ				( ( portTickType ) 1000 )
+#define configMAX_PRIORITIES			( ( unsigned portBASE_TYPE ) 5 )
+#define configMINIMAL_STACK_SIZE		( ( unsigned short ) 130 )
+#define configTOTAL_HEAP_SIZE			( ( size_t ) ( 40960 ) )
+#define configMAX_TASK_NAME_LEN			( 10 )
+#define configUSE_TRACE_FACILITY		1
+#define configUSE_16_BIT_TICKS			0
+#define configIDLE_SHOULD_YIELD			1
+#define configUSE_MUTEXES				1
+#define configQUEUE_REGISTRY_SIZE		8
+#define configCHECK_FOR_STACK_OVERFLOW	2
+#define configUSE_RECURSIVE_MUTEXES		1
+#define configUSE_MALLOC_FAILED_HOOK	1
+#define configUSE_APPLICATION_TASK_TAG	0
+#define configUSE_COUNTING_SEMAPHORES	1
+#define configGENERATE_RUN_TIME_STATS	0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 		0
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+/* Software timer definitions. */
+#define configUSE_TIMERS				1
+#define configTIMER_TASK_PRIORITY		( 2 )
+#define configTIMER_QUEUE_LENGTH		5
+#define configTIMER_TASK_STACK_DEPTH	( configMINIMAL_STACK_SIZE * 2 )
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+#define INCLUDE_vTaskPrioritySet		1
+#define INCLUDE_uxTaskPriorityGet		1
+#define INCLUDE_vTaskDelete				1
+#define INCLUDE_vTaskCleanUpResources	1
+#define INCLUDE_vTaskSuspend			1
+#define INCLUDE_vTaskDelayUntil			1
+#define INCLUDE_vTaskDelay				1
+
+/* Cortex-M specific definitions. */
+#ifdef __NVIC_PRIO_BITS
+	/* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
+	#define configPRIO_BITS       		__NVIC_PRIO_BITS
+#else
+	#define configPRIO_BITS       		6        /* 63 priority levels */
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority"
+function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			0x3f
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	5
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+	
+/* Normal assert() semantics without relying on the provision of an assert.h
+header file. */
+#define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ); }	
+	
+/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
+standard names. */
+#define vPortSVCHandler SVC_Handler
+#define xPortPendSVHandler PendSV_Handler
+#define xPortSysTickHandler SysTick_Handler
+
+#endif /* FREERTOS_CONFIG_H */
+

Demo/CORTEX_M4F_Infineon_XMC4500_Keil/Template.sct

@@ -0,0 +1,15 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x0C000000 0x00100000  {    ; load region size_region
+  ER_IROM1 0x0C000000 0x00100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x10000000 0x00010000  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+}
+