MQTT Lightweight demo (#119)

FreeRTOS-Plus/Demo/FreeRTOS-IoT-Libraries-LTS-Beta2/mqtt/mqtt_light_weight/demo_config.h

@@ -43,7 +43,7 @@
 
 /* Logging configuration for the Demo. */
 #ifndef LIBRARY_LOG_NAME
-    #define LIBRARY_LOG_NAME    "DEMO"
+    #define LIBRARY_LOG_NAME    "MQTTLWDemo"
 #endif
 
 #ifndef LIBRARY_LOG_LEVEL
@@ -53,4 +53,67 @@
 
 /************ End of logging configuration ****************/
 
+/**
+ * @brief The MQTT client identifier used in this example.  Each client identifier
+ * must be unique so edit as required to ensure no two clients connecting to the
+ * same broker use the same client identifier.
+ *
+ * #define democonfigCLIENT_IDENTIFIER				"insert here."
+ */
+
+
+/**
+ * @brief MQTT broker end point to connect to.
+ *
+ * @note For running this demo an MQTT broker, which can be run locally on
+ * the same host is recommended. Any MQTT broker, which can be run on a Windows
+ * host can be used for this demo. However, the instructions below are for
+ * setting up a local Mosquitto broker on a Windows host.
+ * 1. Download Mosquitto from https://mosquitto.org/download/
+ * 2. Install Mosquitto as a Windows service by running the installer.
+ * More details about installing as a Windows service can be found at
+ * https://github.com/eclipse/mosquitto/blob/master/readme-windows.txt and
+ * https://github.com/eclipse/mosquitto/blob/master/readme.md
+ * 3. Verify that Mosquitto server is running locally and listening on port
+ * 1883 by
+ *     a. Opening Power Shell.
+ *     b. Typing in command `netstat -a -p TCP | grep 1883` to check if there
+ *        is an active connection listening on port 1883.
+ *     c. Verify that there is an output as shown below
+ *        `TCP    0.0.0.0:1883           <HOST-NAME>:0       LISTENING`
+ *     d. If there is no output please go through the Mosquitto documentation
+ *        listed above to check if the installation was successful.
+ * 4.After verifying that a Mosquitto broker is running successfully, update
+ * the config democonfigMQTT_BROKER_ENDPOINT to the local IP address of the
+ * Windows host machine. Please note that "localhost" or address "127.0.0.1"
+ * will not work as this example is running on a Windows Simulator and not on
+ * Windows host natively.
+ *
+ * As an alternative option, a publicly hosted Mosquitto broker can also be
+ * used as an MQTT broker end point. This can be done by updating the config
+ * democonfigMQTT_BROKER_ENDPOINT to "test.mosquitto.org". However, this is not
+ * recommended due the possible downtimes of the broker as indicated by the
+ * documentation in https://test.mosquitto.org/.
+ *
+ * #define democonfigMQTT_BROKER_ENDPOINT				"insert here."
+ */
+
+
+/**
+ * @brief The port to use for the demo.
+ *
+ * #define democonfigMQTT_BROKER_PORT					( insert here. )
+ */
+
+
+/**
+ * @brief Set the stack size of the main demo task.
+ *
+ * In the Windows port, this stack only holds a structure. The actual
+ * stack is created by an operating system thread.
+ */
+#define democonfigDEMO_STACKSIZE    configMINIMAL_STACK_SIZE
+
+
+
 #endif /* DEMO_CONFIG_H */

FreeRTOS-Plus/Demo/FreeRTOS-IoT-Libraries-LTS-Beta2/mqtt/mqtt_light_weight/mqtt_config.h

@@ -46,7 +46,7 @@
 #endif
 
 #ifndef LIBRARY_LOG_LEVEL
-    #define LIBRARY_LOG_LEVEL    LOG_INFO
+    #define LIBRARY_LOG_LEVEL    LOG_NONE
 #endif
 
 #include "logging_stack.h"