Add IAR demo for the SiFive RISC-V HiFive Rev B board.

FreeRTOS/Demo/RISC-V_RV32_SiFive_HiFive1_IAR/FreeRTOSConfig.h

@@ -0,0 +1,101 @@
+/*
+ * FreeRTOS Kernel V10.2.1
+ * Copyright (C) 2019 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+#define configISR_STACK_SIZE_WORDS ( 200 )
+#define configCLINT_BASE_ADDRESS	0x2000000
+
+#define configUSE_PREEMPTION			1
+#define configUSE_IDLE_HOOK				0
+#define configUSE_TICK_HOOK				1
+#define configCPU_CLOCK_HZ				( ( uint32_t ) ( 32768 ) )
+#define configTICK_RATE_HZ				( ( TickType_t ) 1000 )
+#define configMAX_PRIORITIES			( 7 )
+#define configMINIMAL_STACK_SIZE		( ( uint32_t ) 100 ) /* Can be as low as 60 but some of the demo tasks that use this constant require it to be higher. */
+#define configTOTAL_HEAP_SIZE			( ( size_t ) ( 12 * 1024 ) )
+#define configMAX_TASK_NAME_LEN			( 16 )
+#define configUSE_TRACE_FACILITY		0
+#define configUSE_16_BIT_TICKS			0
+#define configIDLE_SHOULD_YIELD			0
+#define configUSE_MUTEXES				1
+#define configQUEUE_REGISTRY_SIZE		8
+#define configCHECK_FOR_STACK_OVERFLOW	3
+#define configUSE_RECURSIVE_MUTEXES		1
+#define configUSE_MALLOC_FAILED_HOOK	1
+#define configUSE_APPLICATION_TASK_TAG	0
+#define configUSE_COUNTING_SEMAPHORES	1
+#define configGENERATE_RUN_TIME_STATS	0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 			0
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+/* Software timer definitions. */
+#define configUSE_TIMERS				1
+#define configTIMER_TASK_PRIORITY		( configMAX_PRIORITIES - 1 )
+#define configTIMER_QUEUE_LENGTH		4
+#define configTIMER_TASK_STACK_DEPTH	( configMINIMAL_STACK_SIZE )
+
+/* Task priorities.  Allow these to be overridden. */
+#ifndef uartPRIMARY_PRIORITY
+	#define uartPRIMARY_PRIORITY		( configMAX_PRIORITIES - 3 )
+#endif
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+#define INCLUDE_vTaskPrioritySet			1
+#define INCLUDE_uxTaskPriorityGet			1
+#define INCLUDE_vTaskDelete					1
+#define INCLUDE_vTaskCleanUpResources		1
+#define INCLUDE_vTaskSuspend				1
+#define INCLUDE_vTaskDelayUntil				1
+#define INCLUDE_vTaskDelay					1
+#define INCLUDE_eTaskGetState				1
+#define INCLUDE_xTimerPendFunctionCall		1
+#define INCLUDE_xTaskAbortDelay				1
+#define INCLUDE_xTaskGetHandle				1
+#define INCLUDE_xSemaphoreGetMutexHolder	1
+
+/* Normal assert() semantics without relying on the provision of an assert.h
+header file. */
+#define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); __asm volatile( "ebreak" ); for( ;; ); }
+
+#endif /* FREERTOS_CONFIG_H */

FreeRTOS/Demo/RISC-V_RV32_SiFive_HiFive1_IAR/RTOSDemo.eww

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<workspace>
+    <project>
+        <path>$WS_DIR$\RTOSDemo.ewp</path>
+    </project>
+    <batchBuild />
+</workspace>

FreeRTOS/Demo/RISC-V_RV32_SiFive_HiFive1_IAR/settings/RTOSDemo.Debug.cspy.bat

@@ -0,0 +1,40 @@
+@REM This batch file has been generated by the IAR Embedded Workbench
+@REM C-SPY Debugger, as an aid to preparing a command line for running
+@REM the cspybat command line utility using the appropriate settings.
+@REM
+@REM Note that this file is generated every time a new debug session
+@REM is initialized, so you may want to move or rename the file before
+@REM making changes.
+@REM
+@REM You can launch cspybat by typing the name of this batch file followed
+@REM by the name of the debug file (usually an ELF/DWARF or UBROF file).
+@REM
+@REM Read about available command line parameters in the C-SPY Debugging
+@REM Guide. Hints about additional command line parameters that may be
+@REM useful in specific cases:
+@REM   --download_only   Downloads a code image without starting a debug
+@REM                     session afterwards.
+@REM   --silent          Omits the sign-on message.
+@REM   --timeout         Limits the maximum allowed execution time.
+@REM 
+
+
+@echo off 
+
+if not "%~1" == "" goto debugFile 
+
+@echo on 
+
+"C:\devtools\IAR Systems\Embedded Workbench 8.3\common\bin\cspybat" -f "C:\Users\ribarry\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\RISC-V_RV32_SiFive_HiFive1_IAR\settings\RTOSDemo.Debug.general.xcl" --backend -f "C:\Users\ribarry\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\RISC-V_RV32_SiFive_HiFive1_IAR\settings\RTOSDemo.Debug.driver.xcl" 
+
+@echo off 
+goto end 
+
+:debugFile 
+
+@echo on 
+
+"C:\devtools\IAR Systems\Embedded Workbench 8.3\common\bin\cspybat" -f "C:\Users\ribarry\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\RISC-V_RV32_SiFive_HiFive1_IAR\settings\RTOSDemo.Debug.general.xcl" "--debug_file=%~1" --backend -f "C:\Users\ribarry\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\RISC-V_RV32_SiFive_HiFive1_IAR\settings\RTOSDemo.Debug.driver.xcl" 
+
+@echo off 
+:end

FreeRTOS/Demo/RISC-V_RV32_SiFive_HiFive1_IAR/settings/RTOSDemo.Debug.cspy.ps1

@@ -0,0 +1,31 @@
+param([String]$debugfile = "");
+
+# This powershell file has been generated by the IAR Embedded Workbench
+# C - SPY Debugger, as an aid to preparing a command line for running
+# the cspybat command line utility using the appropriate settings.
+#
+# Note that this file is generated every time a new debug session
+# is initialized, so you may want to move or rename the file before
+# making changes.
+#
+# You can launch cspybat by typing Powershell.exe -File followed by the name of this batch file, followed
+# by the name of the debug file (usually an ELF / DWARF or UBROF file).
+#
+# Read about available command line parameters in the C - SPY Debugging
+# Guide. Hints about additional command line parameters that may be
+# useful in specific cases :
+#   --download_only   Downloads a code image without starting a debug
+#                     session afterwards.
+#   --silent          Omits the sign - on message.
+#   --timeout         Limits the maximum allowed execution time.
+#
+
+
+if ($debugfile -eq "")
+{
+& "C:\devtools\IAR Systems\Embedded Workbench 8.3\common\bin\cspybat" -f "C:\Users\ribarry\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\RISC-V_RV32_SiFive_HiFive1_IAR\settings\RTOSDemo.Debug.general.xcl" --backend -f "C:\Users\ribarry\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\RISC-V_RV32_SiFive_HiFive1_IAR\settings\RTOSDemo.Debug.driver.xcl" 
+}
+else
+{
+& "C:\devtools\IAR Systems\Embedded Workbench 8.3\common\bin\cspybat" -f "C:\Users\ribarry\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\RISC-V_RV32_SiFive_HiFive1_IAR\settings\RTOSDemo.Debug.general.xcl" --debug_file=$debugfile --backend -f "C:\Users\ribarry\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\RISC-V_RV32_SiFive_HiFive1_IAR\settings\RTOSDemo.Debug.driver.xcl" 
+}

FreeRTOS/Demo/RISC-V_RV32_SiFive_HiFive1_IAR/settings/RTOSDemo.Debug.driver.xcl

@@ -0,0 +1,21 @@
+"--core=RV32IMAC" 
+
+"-p" 
+
+"C:\devtools\IAR Systems\Embedded Workbench 8.3\riscv\config\debugger\SiFive\hifive1.ddf" 
+
+"--drv_verify_download" 
+
+"--jet_standard_reset=2,300,1500" 
+
+"--reset_style=\"0,-,0,Disabled__no_reset_\"" 
+
+"--reset_style=\"1,-,0,Software\"" 
+
+"--reset_style=\"2,-,1,Hardware\"" 
+
+"--jet_emu_param=cJtagOpt=Fmt:OScan1" 
+
+
+
+

FreeRTOS/Demo/RISC-V_RV32_SiFive_HiFive1_IAR/settings/RTOSDemo.Debug.general.xcl

@@ -0,0 +1,13 @@
+"C:\devtools\IAR Systems\Embedded Workbench 8.3\riscv\bin\riscvproc.dll" 
+
+"C:\devtools\IAR Systems\Embedded Workbench 8.3\riscv\bin\riscvijet.dll" 
+
+"C:\Users\ribarry\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\RISC-V_RV32_SiFive_HiFive1_IAR\Debug\Exe\RTOSDemo.out" 
+
+--plugin="C:\devtools\IAR Systems\Embedded Workbench 8.3\riscv\bin\riscvbat.dll" 
+
+--flash_loader="C:\devtools\IAR Systems\Embedded Workbench 8.3\riscv\config\flashloader\SiFive\hifive1.board" 
+
+
+
+

FreeRTOS/Demo/RISC-V_RV32_SiFive_HiFive1_IAR/settings/RTOSDemo.dnx

@@ -0,0 +1,119 @@
+<?xml version="1.0"?>
+<settings>
+    <Stack>
+        <FillEnabled>0</FillEnabled>
+        <OverflowWarningsEnabled>1</OverflowWarningsEnabled>
+        <WarningThreshold>90</WarningThreshold>
+        <SpWarningsEnabled>1</SpWarningsEnabled>
+        <WarnLogOnly>1</WarnLogOnly>
+        <UseTrigger>1</UseTrigger>
+        <TriggerName>main</TriggerName>
+        <LimitSize>0</LimitSize>
+        <ByteLimit>50</ByteLimit>
+    </Stack>
+    <DebugChecksum>
+        <Checksum>2321671989</Checksum>
+    </DebugChecksum>
+    <Disassembly>
+        <InstrCount>0</InstrCount>
+        <MixedMode>1</MixedMode>
+    </Disassembly>
+    <CodeCoverage>
+        <Enabled>0</Enabled>
+        <ShowSource>0</ShowSource>
+        <HideCovered>0</HideCovered>
+    </CodeCoverage>
+    <CallStack>
+        <ShowArgs>0</ShowArgs>
+    </CallStack>
+    <DataAlign>
+        <Action>1</Action>
+        <Notification>1</Notification>
+    </DataAlign>
+    <Jet>
+        <JetConnSerialNo>73866</JetConnSerialNo>
+        <JetConnFoundProbes />
+        <PrevWtdReset>Hardware</PrevWtdReset>
+        <OnlineReset>Software</OnlineReset>
+        <DisableInterrupts>0</DisableInterrupts>
+        <LeaveRunning>1</LeaveRunning>
+        <MultiCoreRunAll>0</MultiCoreRunAll>
+    </Jet>
+    <PlDriver>
+        <FirstRun>0</FirstRun>
+        <MemConfigValue>C:\devtools\IAR Systems\Embedded Workbench 8.3\riscv\config\debugger\SiFive\hifive1.ddf</MemConfigValue>
+    </PlDriver>
+    <RiscvDriver>
+        <EnableCache>1</EnableCache>
+    </RiscvDriver>
+    <Trace1>
+        <Enabled>0</Enabled>
+        <ShowSource>1</ShowSource>
+    </Trace1>
+    <DriverProfiling>
+        <Enabled>0</Enabled>
+        <Mode>1</Mode>
+        <Graph>0</Graph>
+        <Symbiont>0</Symbiont>
+    </DriverProfiling>
+    <CallStackLog>
+        <Enabled>0</Enabled>
+    </CallStackLog>
+    <CallStackStripe>
+        <ShowTiming>1</ShowTiming>
+    </CallStackStripe>
+    <InterruptLog>
+        <LogEnabled>0</LogEnabled>
+        <GraphEnabled>0</GraphEnabled>
+        <ShowTimeLog>1</ShowTimeLog>
+        <SumEnabled>0</SumEnabled>
+        <ShowTimeSum>1</ShowTimeSum>
+        <SumSortOrder>0</SumSortOrder>
+    </InterruptLog>
+    <DataLog>
+        <LogEnabled>0</LogEnabled>
+        <GraphEnabled>0</GraphEnabled>
+        <ShowTimeLog>1</ShowTimeLog>
+        <SumEnabled>0</SumEnabled>
+        <ShowTimeSum>1</ShowTimeSum>
+    </DataLog>
+    <Interrupts>
+        <Enabled>1</Enabled>
+    </Interrupts>
+    <MemConfig>
+        <Base>1</Base>
+        <Manual>0</Manual>
+        <Ddf>1</Ddf>
+        <TypeViol>0</TypeViol>
+        <Stop>1</Stop>
+    </MemConfig>
+    <Simulator>
+        <Freq>50000000</Freq>
+        <FreqHi>0</FreqHi>
+        <MultiCoreRunAll>1</MultiCoreRunAll>
+    </Simulator>
+    <SfrWindow>
+        <Show>1 1</Show>
+        <Sort>4 0</Sort>
+    </SfrWindow>
+    <TermIOLog>
+        <LoggingEnabled>_ 0</LoggingEnabled>
+        <LogFile>_ ""</LogFile>
+    </TermIOLog>
+    <LogFile>
+        <LoggingEnabled>_ 0</LoggingEnabled>
+        <LogFile>_ ""</LogFile>
+        <Category>_ 0</Category>
+    </LogFile>
+    <Breakpoints2>
+        <Bp0>_ 0 "EMUL_CODE" "{$PROJ_DIR$\..\Common\Minimal\MessageBufferDemo.c}.813.21" 0 0 1 "" 0 "" 0</Bp0>
+        <Bp1>_ 0 "EMUL_CODE" "0x200129EE" 0 0 1 "" 0 "" 0</Bp1>
+        <Bp2>_ 0 "EMUL_CODE" "{$PROJ_DIR$\..\Common\Minimal\MessageBufferDemo.c}.813.21" 0 0 1 "" 0 "" 0</Bp2>
+        <Bp3>_ 0 "EMUL_CODE" "0x200126BE" 0 0 1 "" 0 "" 0</Bp3>
+        <Count>4</Count>
+    </Breakpoints2>
+    <Aliases>
+        <Count>0</Count>
+        <SuppressDialog>0</SuppressDialog>
+    </Aliases>
+</settings>

FreeRTOS/Demo/RISC-V_RV32_SiFive_HiFive1_IAR/settings/RTOSDemo.reggroups

@@ -0,0 +1 @@
+