mirror of
https://github.com/eclipse-threadx/threadx.git
synced 2026-08-17 17:43:54 +08:00
Frédéric DesbiensandGitHub
5513b1724a
Adds a complete ThreadX port for the OpenHW CORE-V MCU SoC, targeting the Digilent Nexys A7 FPGA board with an Ashling Opella-LD debug probe.
New files
---------
cmake/riscv64-gcc-rv32imc.cmake
CMake toolchain file for riscv64-unknown-elf-gcc targeting rv32imc_zicsr/ilp32.
ports/risc-v32/gnu/example_build/core_v_mcu/ -- Full BSP + demo application:
Assembly
crt0.S C runtime startup (BSS clear, GP/SP init, call main)
vectors.S 32-entry vectored interrupt table at 0x1c000800
tx_initialize_low_level.S mtvec setup (vectored mode), stack/free-mem pointers
BSP drivers (bsp/)
system_core_v_mcu.c Top-level init and ISR dispatcher (isr_table[32])
irq.c PULP APB interrupt controller (enable/disable/mask)
timer_irq.c PULP FC Timer -- 100 Hz tick from 10 MHz SOC clock
fll.c Frequency Locked Loop -- 5 MHz to 50 MHz (FPGA)
uart_driver.c UDMA UART channel 0 -- polled TX, non-blocking RX (8-bit transfer width)
gpio.c PULP apb_gpiov2 driver: set/clear/toggle/direction by pin index;
pad-mux via per-pad indexed registers at APB_SOC_CTRL + 0x400 + pad*4;
full pinmux API (gpio_setpinmux, gpio_getpinmux, gpio_pin_set_dir,
gpio_pin_read_status)
i2c_master.c Polled UDMA I2C master
adt7420.c ADT7420 temperature sensor driver
string.c Freestanding memset/memcpy shim (no newlib)
Headers (include/)
Peripheral register maps, MMIO inlines, BSP API declarations, tx_user.h
Application
demo_threadx.c Two threads: LED[0] blink at 1 Hz (IO pad 11, GPIO pin 4, MUX=2)
+ UART heartbeat with startup banner
("Eclipse ThreadX for OpenHW CORE-V MCU vX.Y.Z.BBBBB")
link.ld Linker script: .vectors@0x1c000800, .text@0x1c000880
CMakeLists.txt Build definition (references THREADX_ROOT)
build.sh One-shot CMake+Ninja build script
Tooling
install_deps.sh Automates toolchain/OpenOCD dependency setup
deploy.sh One-step GDB flashing via Ashling Opella-LD;
gdb-multiarch fallback when riscv64-unknown-elf-gdb is absent;
supports --wsl flag required by usbipd-win v5.x
openocd-nexys-Ashling-Opella-LD.cfg OpenOCD config for Opella-LD over JTAG
Tests (tests/)
test_irq.c / test_timer.c Host-compiled unit tests (2/2 pass)
mock/mmio_mock.* Software MMIO register map for host testing
Documentation
README.md Hardware overview, build, flash/debug, BSP API reference
Architecture notes
------------------
- CV32E40P uses the PULP/PULPissimo interrupt controller (not CLINT); IRQ lines
are masked via APB registers, not the mie CSR.
- mtvec must be 256-byte aligned; vectors placed at 0x1c000800 (vectored mode).
- Timer IRQ = line 10; dispatch via isr_table[mcause & 0x1f].
- Build: -march=rv32imc_zicsr -mabi=ilp32, -ffreestanding, -nodefaultlibs.
- Verified: ELF 11 KB text, sections at correct addresses, unit tests pass.
Third-party attributions
------------------------
BSP files derived from core-v-freertos (Apache-2.0):
(c) 2019-2020 ETH Zurich and University of Bologna
(c) 2020 GreenWaves Technologies
(c) 2011-2014 Wind River Systems, Inc.
(c) 2017 SiFive Inc. (crt0.S, BSD-2-Clause portions)
All original copyright notices retained; see individual file headers.
SPDX: Apache-2.0 AND MIT (crt0.S: (Apache-2.0 OR BSD-2-Clause) AND MIT).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>