rtems/testsuites/libtests/block08/bdbuf_test2_1.c

/* SPDX-License-Identifier: BSD-2-Clause */

/*! @file
 * @brief Check how rtems_bdbuf_read() and rtems_bdbuf_release_modified()
 * coexist. rtems_bdbuf_read() is blocked when required buffer is being
 * transferred.
 *
 * Test sequence:
 * -# Call rtems_bdbuf_read() function in thread #1 and block on
 *    waiting for read complete notification.
 * -# Call rtems_bdbuf_read() function in thread #2 for the same block
 *    number. As the result it blocks on this read as well
 *    (but it will block on transfer semaphore).
 * -# Disk device reports success in read complete notification.
 *    As the result rtems_bdbuf_read() function retuens RTEMS_SUCCESSFUL
 *    in thread #1.
 * -# Thread #1 releases buffer with rtems_bdbuf_release_modified() function.
 * -# rtems_bdbuf_read() function in thread #2 unlocks and returns
 *    RTEMS_SUCCESSFUL.
 * -# Wait swapout period and check that the buffer is not requested to
 *    be flushed to a disk.
 * -# Call rtems_bdbuf_release() function in thread #2.
 * -# Check that this block number is requested for a flush in swapout period.
 *
 * Copyright (C) 2010 OKTET Labs, St.-Petersburg, Russia
 * Author: Oleg Kravtsov <Oleg.Kravtsov@oktetlabs.ru>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include "bdbuf_tests.h"

static rtems_task bdbuf_test2_1_thread1(rtems_task_argument arg);
static rtems_task bdbuf_test2_1_thread2(rtems_task_argument arg);

/* Block number used in the test */
#define TEST_BLK_NUM 60

void
bdbuf_test2_1_main()
{
    bdbuf_test_msg msg;

    TEST_START("Test 2.1");

    /*
     * Create two working threads that will call rtems_bdbuf_read() function.
     */
    START_THREAD(1, bdbuf_test2_1_thread1);
    START_THREAD(2, bdbuf_test2_1_thread2);

    /*
     * Step 1:
     * Thread #1 calls rtems_bdbuf_read() and we block
     * this thread on data transfer operation.
     */
    WAIT_DRV_MSG(&msg);

    /*
     * Step 2:
     * Thread #2 calls rtems_bdbuf_read() for the same
     * block number, as the result it shall block waiting
     * on buffer state change (waiting on TRANSFER state).
     */
    CONTINUE_THREAD(2);

    /* Make sure thread #2 managed to block on the buffer. */
    CHECK_THREAD_BLOCKED(2);

    /*
     * Step 3:
     * Unblock thread #1 by reporting successful data transfer result.
     */
    SEND_DRV_MSG(0, 0, RTEMS_SUCCESSFUL, 0);

    /*
     * Wait for sync from thread #1.
     */
    WAIT_THREAD_SYNC(1);
    TEST_CHECK_RESULT("3");

    /* Check thread #2 is still blocked */
    CHECK_THREAD_BLOCKED(2);

    /*
     * Step 4:
     * Thread #1 releases buffer with bdbuf_release_modified() call.
     */
    CONTINUE_THREAD(1);

    /*
     * Step 5:
     * On buffer release operation, we should have unblock
     * of thread #2 that is waiting on read buffer operation.
     */
    WAIT_THREAD_SYNC(2);
    TEST_CHECK_RESULT("5");

   /*
    * Step 6:
    * Wait swapout period and check that there is no
    * request to flush buffer onto a disk.
    */
    CHECK_NO_DRV_MSG();

    /*
     * Step 7:
     * Thread #2 releases buffer with bdbuf_release() call.
     */
    CONTINUE_THREAD(2);

    /*
     * Step 8:
     * Check that in swapout interval disk device
     * driver is requested to flush buffer.
     */
    WAIT_DRV_MSG_WR(&msg);
    SEND_DRV_MSG(0, 0, RTEMS_SUCCESSFUL, 0);

    TEST_STOP();
}

static rtems_task
bdbuf_test2_1_thread1(rtems_task_argument arg)
{
    rtems_status_code   rc;
    rtems_bdbuf_buffer *bd = NULL;

    /*
     * Step 1 - 3:
     * Try to read blk #N on thread #1
     * We will block on this read and meanwhile
     * thread #2 will try to read the same block.
     * After blocking on read in thread #2, device
     * driver will notify successful completion of
     * date transfer, and as the result this call
     * will return valid buffer.
     */
    rc = rtems_bdbuf_read(test_dd, TEST_BLK_NUM, &bd);
    if (rc != RTEMS_SUCCESSFUL)
    {
        TEST_FAILED();
    }
    CONTINUE_MAIN(1);

    /*
     * Step 4:
     * Release buffer returned on the previous step.
     */
    rc = rtems_bdbuf_release_modified(bd);
    if (rc != RTEMS_SUCCESSFUL)
    {
        TEST_FAILED();
    }
    THREAD_END();
}

static rtems_task
bdbuf_test2_1_thread2(rtems_task_argument arg)
{
    rtems_status_code   rc;
    rtems_bdbuf_buffer *bd = NULL;

    WAIT_MAIN_SYNC(2);

    /*
     * Step 2:
     * Try to read block #N. Right now thread #1 is waiting
     * on data transfer operation, so we will block here as well.
     *
     * Step 5:
     * On step 4 thread #1 releases buffer and as the result
     * our read operation should finish with success.
     */
    rc = rtems_bdbuf_read(test_dd, TEST_BLK_NUM, &bd);
    if (rc != RTEMS_SUCCESSFUL)
    {
        TEST_FAILED();
    }
    CONTINUE_MAIN(2);

    /*
     * Step 7:
     * Release buffer.
     */
    rc = rtems_bdbuf_release(bd);
    if (rc != RTEMS_SUCCESSFUL)
    {
        TEST_FAILED();
    }
    THREAD_END();
}