mirror of
https://gitlab.rtems.org/rtems/rtos/rtems.git
synced 2026-09-21 19:15:44 +08:00
Sebastian Huber
5ed0035377
Sort the .noinit* input sections by name first, then by alignment if two sections have the same name. This allows the placement of begin/end symbols to initialize some areas with a special value. Update #4678.
# Author: Ralf Corsepius (corsepiu@faw.uni-ulm.de)
# Adapted by: John Mills (jmills@tga.com)
# Corrections: Radzislaw Galler (rgaller@et.put.poznan.pl)
BSP NAME: generic SH2 (gensh2)
BOARD: EVB7045F (note 2)
BUS: n/a
CPU FAMILY: Hitachi SH
CPU: SH 7045F
COPROCESSORS: none
MODE: n/a
DEBUG MONITOR: gdb
PERIPHERALS
===========
TIMERS: on-chip
RESOLUTION: cf. Hitachi SH 704X Hardware Manual (Phi/16)
SERIAL PORTS: on-chip (with 2 ports)
REAL-TIME CLOCK: none
DMA: not used
VIDEO: none
SCSI: none
NETWORKING: none
DRIVER INFORMATION
==================
CLOCK DRIVER: on-chip timer
IOSUPP DRIVER: default
SHMSUPP: default
TIMER DRIVER: on-chip timer
TTY DRIVER: /dev/console
STDIO
=====
PORT: /dev/sci0
ELECTRICAL: SCI0
BAUD: 9600
BITS PER CHARACTER: 8
PARITY: NONE
STOP BITS: 1
NOTES
=====
(1) The present 'hw_init.c' file provides 'early_hw_init'(void) which
is normally called from 'start.S' to provide such minimal HW setup
as is conveniently written in 'C' and can make use of global
symbols for 7045F processor elements. It also provides
'void bsp_hw_init (void)' normally called from 'bspstart.c', shortly
before RTEMS itself is started.
These are both minimal functions intended to support the RTEMS test
suites.
(2) See README.EVB7045F