OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc",
              "elf32-powerpc")
OUTPUT_ARCH(powerpc)
ENTRY(_start)
/* Do we need any of these for elf?
   __DYNAMIC = 0;    */
PROVIDE (__stack = 0);


MEMORY {
        BOTTOM  : ORIGIN = 0, LENGTH = 0x100
	VECTORS	: ORIGIN = 0x100 ,  LENGTH = 0x3000-0x100
	CODE : ORIGIN = 0x3000 , LENGTH = 0x400000 
}
SECTIONS
{
  /* discard the 'shared/vector.S' entry point section */
  /DISCARD/ :
  {
 	*(.entry_point_section)
  }


  .vectors :
  {
	/* should be the first thing... */
	*(.mvme5500_preloader_section)

   /*
    * This section is used only if NO_DYNAMIC_EXCEPTION_VECTOR_INSTALL
    * is defined in vectors/vectors.S
    *  *(.vectors)
    * We actually RELY on dynamic vector installation since we need
    * this space for the preloader...
    */
  } > VECTORS


  /* START OF THE LOADED IMAGE (parts moved by the preloader) */
  .image_start :
  {
	__rtems_start = ABSOLUTE(.);
  } > CODE

  /* Read-only sections, merged into text segment: */
  .interp   : { *(.interp) }	> CODE
  .hash           : { *(.hash)          }	> CODE
  .dynsym         : { *(.dynsym)                }	> CODE
  .dynstr         : { *(.dynstr)                }	> CODE
  .gnu.version   : { *(.gnu.version)      }	> CODE
  .gnu.version_d   : { *(.gnu.version_d)  }	> CODE
  .gnu.version_r   : { *(.gnu.version_r)  }	> CODE
  .rela.text     :
    { *(.rela.text) *(.rela.gnu.linkonce.t*) }	> CODE
  .rela.data     :
    { *(.rela.data) *(.rela.gnu.linkonce.d*) }	> CODE
  .rela.rodata   :
    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }	> CODE
  .rela.got       : { *(.rela.got)      }	> CODE
  .rela.got1      : { *(.rela.got1)     }	> CODE
  .rela.got2      : { *(.rela.got2)     }	> CODE
  .rela.ctors     : { *(.rela.ctors)    }	> CODE
  .rela.dtors     : { *(.rela.dtors)    }	> CODE
  .rela.init      : { *(.rela.init)     }	> CODE
  .rela.fini      : { *(.rela.fini)     }	> CODE
  .rela.bss       : { *(.rela.bss)      }	> CODE
  .rela.plt       : { *(.rela.plt)      }	> CODE
  .rela.sdata     : { *(.rela.sdata)    }	> CODE
  .rela.sbss      : { *(.rela.sbss)     }	> CODE
  .rela.sdata2    : { *(.rela.sdata2)   }	> CODE
  .rela.sbss2     : { *(.rela.sbss2)    }	> CODE

  .init			  : { *(.init)			} >CODE

  .text      :	
  {
    *(.text)	
 
    /*
     * Special FreeBSD sysctl sections.
     */
    . = ALIGN (16);
    __start_set_sysctl_set = .;
    *(set_sysctl_*);
    __stop_set_sysctl_set = ABSOLUTE(.);
    *(set_domain_*);
    *(set_pseudo_*);
 
   /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
    *(.gnu.linkonce.t*)
  }  > CODE

  .fini			  : { _fini = .; *(.fini)	} >CODE
  .rodata         : { *(.rodata*) *(.gnu.linkonce.r*) }	> CODE
  .rodata1        : { *(.rodata1) }	> CODE
_SDA2_BASE_ = __SDATA2_START__ + 0x8000;
  .sdata2         : { *(.sdata2) *(.gnu.linkonce.s2.*)  }	> CODE
  .sbss2          : { 
    				PROVIDE (__sbss2_start = .);
					  *(.sbss2) *(.gnu.linkonce.sb2.*)
    				PROVIDE (__sbss2_end = .);
					}	> CODE
  .eh_frame	      : { *.(eh_frame)		} >CODE
  _etext = .;
  PROVIDE (etext = .);
  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  It would
     be more correct to do this:
       . = ALIGN(0x40000) + (ALIGN(8) & (0x40000 - 1));
     The current expression does not correctly handle the case of a
     text segment ending precisely at the end of a page; it causes the
     data segment to skip a page.  The above expression does not have
     this problem, but it will currently (2/95) cause BFD to allocate
     a single segment, combining both text and data, for this case.
     This will prevent the text segment from being shared among
     multiple executions of the program; I think that is more
     important than losing a page of the virtual address space (note
     that no actual memory is lost; the page which is skipped can not
     be referenced).  */
 .data  ALIGN(0x1000)  :
  {
	PROVIDE(__DATA_START__ = ABSOLUTE(.) );
    *(.data)
    *(.gnu.linkonce.d*)	
    CONSTRUCTORS
  } > CODE
  .data1   : { *(.data1) }	> CODE
  PROVIDE (__EXCEPT_START__ = .);
  .gcc_except_table   : { *(.gcc_except_table) } > CODE
  PROVIDE (__EXCEPT_END__ = .);
  .got1           : { *(.got1) }	> CODE
  .dynamic        : { *(.dynamic) }	> CODE
  /* Put .ctors and .dtors next to the .got2 section, so that the pointers
     get relocated with -mrelocatable. Also put in the .fixup pointers.
     The current compiler no longer needs this, but keep it around for 2.7.2  */
                PROVIDE (_GOT2_START_ = .);
  .got2           :  { *(.got2) }	> CODE
/*
                PROVIDE (__CTOR_LIST__ = .);
  .ctors          : { *(.ctors) }	> CODE
                PROVIDE (__CTOR_END__ = .);
*/
  .ctors :
  {
    KEEP(*crtbegin.o(.ctors))
    KEEP(*(EXCLUDE_FILE(*crtend.o) .ctors))
    KEEP(*(SORT(.ctors.*)))
    KEEP(*(.ctors))
  } > CODE
  .dtors :
  {
    KEEP(*crtbegin.o(.dtors))
    KEEP(*(EXCLUDE_FILE(*crtend.o) .dtors))
    KEEP(*(SORT(.dtors.*)))
    KEEP(*(.dtors))
  } > CODE
/*
                PROVIDE (__DTOR_LIST__ = .);
  .dtors          : { *(.dtors) }	> CODE
                PROVIDE (__DTOR_END__ = .);
*/
                PROVIDE (_FIXUP_START_ = .);
  .fixup          : { *(.fixup) }	> CODE
                PROVIDE (_FIXUP_END_ = .);
                PROVIDE (_GOT2_END_ = .);
                PROVIDE (_GOT_START_ = .);
  .got            : { *(.got) }	> CODE
  .got.plt        : { *(.got.plt) }	> CODE
                PROVIDE (_GOT_END_ = .);

  .jcr            : { KEEP (*(.jcr)) } > CODE

  /* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
_SDA_BASE_ = __SDATA_START__ + 0x8000;
  .sdata          : { *(.sdata) *(.gnu.linkonce.s.*) }	> CODE
  _edata  =  .;
  PROVIDE (edata = .);
/* END OF THE LOADED IMAGE (parts moved by the preloader) */
/* BELOW THIS POINT, NO LOADABLE ITEMS MUST APPEAR */
  .sbss      :
  {
    PROVIDE (__sbss_start = ABSOLUTE(.));
    *(.sbss)
    *(.scommon)
    *(.dynsbss)
    PROVIDE (__sbss_end = ABSOLUTE(.));
  } > CODE
  .plt   : { *(.plt) }	> CODE
  .bss       :
  {
   PROVIDE (__bss_start = ABSOLUTE(.));
   *(.dynbss)
   *(.bss)
   *(COMMON)
  . = ALIGN(16);
  } > CODE
  /* proper alignment for SYSV stack
   * (init stack is allocated just after __rtems_end
   */
  . = ALIGN(16);
  _end = . ;
  __rtems_end = . ;
  PROVIDE (end = .);
  /DISCARD/ : 
  {
    *(.comment)
  }


  /* Stabs debugging sections.  */
  .stab 0 : { *(.stab) }
  .stabstr 0 : { *(.stabstr) }
  .stab.excl 0 : { *(.stab.excl) }
  .stab.exclstr 0 : { *(.stab.exclstr) }
  .stab.index 0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }
  .comment 0 : { *(.comment) }

  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.  */
  /* DWARF 1 */
  .debug          0 : { *(.debug) }
  .line           0 : { *(.line) }
  
  /* GNU DWARF 1 extensions */
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_sfnames  0 : { *(.debug_sfnames) }
  
  /* DWARF 1.1 and DWARF 2 */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }
  
  /* DWARF 2 */
  .debug_info     0 : { *(.debug_info) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }
  
  /* SGI/MIPS DWARF 2 extensions */
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_varnames  0 : { *(.debug_varnames) }
  /* These must appear regardless of  .  */
}

/* "Conditional linking" is not supported, unfortunately.
 * This BSP supports getting a network configuration
 * from NVRAM settings. Hence, the startup code must
 * access the 'rtems_bsdnet_config' structure.
 * However, that symbol (and a couple of other networking
 * related symbols) should only be referenced if the application
 * actually does networking - otherwise a lot of
 * code would pulled in from the libnetworking.a under
 * all circumstances.
 *
 * bspstart.c uses these alias names and determines
 * at runtime if they are void or valid (by comparing
 * against the NULL address).
 *
 * Unfortunately, it is not possible to conditionally
 * declare a symbol 'EXTERN' - hence we must rely on
 * other code (probably cross-references within
 * libnetworking itself) causing a reference to the
 * 'real' symbols...
 */

__BSP_wrap_rtems_bsdnet_bootp_boot_file_name =
	DEFINED(rtems_bsdnet_bootp_boot_file_name) ?
		rtems_bsdnet_bootp_boot_file_name
		: 0 ;
__BSP_wrap_rtems_bsdnet_bootp_cmdline =
	DEFINED(rtems_bsdnet_bootp_cmdline) ?
		rtems_bsdnet_bootp_cmdline
		: 0 ;
__BSP_wrap_rtems_bsdnet_bootp_server_address =
	DEFINED(rtems_bsdnet_bootp_server_address) ?
		rtems_bsdnet_bootp_server_address
		: 0 ;
__BSP_wrap_rtems_bsdnet_config =
	DEFINED(rtems_bsdnet_config) ?
		rtems_bsdnet_config
		: 0 ;
__BSP_wrap_rtems_bsdnet_do_bootp =
	DEFINED(rtems_bsdnet_do_bootp) ?
		rtems_bsdnet_do_bootp
		: 0 ;
__BSP_wrap_inet_pton =
	DEFINED(inet_pton) ?
		inet_pton
		: 0 ;
__BSP_wrap_rtems_bsdnet_loopattach =
	DEFINED(rtems_bsdnet_loopattach) ?
		rtems_bsdnet_loopattach
		: 0 ;
