萌新源
005d291492
* [bsp/Infineon] Fix PWM macro mismatches left by the CHx_PORTy rename
Commit e5382cb733 renamed the PWM table guards in drv_pwm.c to the
CHx_PORTy convention but only adapted the psoc6-evk Kconfig, leaving
several mismatches behind:
- The psoc6-evaluationkit-062S2 slider sample still tested the old
flat name BSP_USING_PWM0_PORT0 while the board Kconfig defines
BSP_USING_PWM0_CH0_PORT0, so the PWM init was compiled out.
- The PORT13 entry was renamed to BSP_USING_PWM0_CH7_PORT13, a macro
that no Kconfig defines, and the channel is wrong anyway:
PWM0_CH3_PORT13_CONFIG carries .channel = 3, PORT13 sits under the
PWM0 CH3 menu, and the slider demo selects CH3 + PORT13.
- The PSOC62 template and five psoc6 boards (cy8ckit-062-BLE,
cy8ckit-062-WIFI-BT, cy8ckit-062S2-43012, cy8ckit-062s4,
cy8cproto-062S3-4343W) still define the old flat names.
Fix all of them by migrating the evaluationkit sample to
BSP_USING_PWM0_CH0_PORT0 and renaming the PORT13 group to
BSP_USING_PWM0_CH3_PORT13 across drv_pwm.c, the PSOC62 template and
the five boards' Kconfigs/slider samples, so Kconfig, driver table
and samples match again.
Note: the sibling guards BSP_USING_PWM0_CH7_PORT2/5/7/9/10/12 are
still not generated by these boards' Kconfigs; left untouched for a
separate discussion.
* style: format code with clang-format [skip ci]
Infineon Psoc6-evaluationkit-062S2 Introduction
Overview
This chapter is a description of the BSP (Board Support Package) provided by RT-Thread for the PSoC6 CY8CKIT-062S2-43012 development board.
The main contents are as follows:
- Introduction to Development Board Resources
- BSP Quick Start
- Advanced Usage
By reading the Getting Started chapter developers can quickly get up and running with the BSP and get RT-Thread running on the board. In the RT-Thread Document Center , more advanced features will be introduced to help developers utilize RT-Thread to drive more on-board resources.
Hardware Introduction
The Psoc6-evaluationkit-062S2 is a development board from RT-Thread in conjunction with Infineon that integrates a 32-bit dual-core CPU subsystem (ARM Cortex-M4 and ARM Cortex-M0) with a single-cycle multiplication 150-MHz Arm Cortex-M4F CPU (floating-point and memory protection unit), and a 100-MHz Cortex M0+ CPU with single-cycle multiplication and MPU to fully utilize the performance of the PSoC6 dual-core chips.
The core of the board Onboard resources are listed below:
-
MCU: CY8C624ABZI-S2D44, Cortex-M4 at 150MHz, Cortex-M0 at 100MHz, 2MB Flash and 1MB SRAM For more details on the MCU manual, please refer to the document PSoC 6 MCU: CY8C62x8, CY8C62xA Datasheet (infineon.com). CY8C62XA-DataSheet-v17_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee7d03a70b1)
-
On-board resources: microSD card, touch slider, Arduino interface
-
Development Environment: ModusToolbox 2.0/MDK V5 PSoC® Creator™ Download Link [ModusToolbox™ Software - Infineon Technologies](https://www.infineon.com/cms/en/design-support/tools/sdk/ modustoolbox-software/)
Peripheral Support
| On-chip peripherals | Support | Note |
|---|---|---|
| USB to Serial | Support | UART0 |
| GPIO | Support | — |
| UART | Support | UART0-5 |
| Touch | Support | Touchscreen slider |
Quick Start
This BSP is developed with MDK V5 and RT-Thread Studio as the development environment (compiler: ARMClang / GCC), and we describe how to get the system up and running.
Developed with MDK V5
Hardware Connection
Use the data cable to connect the development board to the PC.
Compile and Download
1、Download Packages: Enter pkgs --update command in ENV environment, download the required HAL library packages, the files will be stored in Packages directory.
2、Generate MDK Project: Enter SCons ---target==MDK5 command in ENV environment, ENV will automatically generate MDK5 project.
3、Configure the Project:
First of all, open MDK. If there is no Infineon-PSoC6 chip support package installed, you will be prompted to install it online, follow the prompts to install it. If you have network problems, you can enter the keil official website to download the installation package, offline installation.
4、 Compile the Project: After installing the chip support package, compile it in the MDK project.
- Download the Project:
The default configuration of the project is to use the on-board DAP-LINK to download the program using the SWD method, use the data cable to connect to the development board, and then click the download button directly after compilation.
Developing with RT-Thread Studio
Importing a Project
- First open the
RT-Thread Studiodevelopment tool, tap File->Import-> RT-Thread Studio project into the workspace in the upper left corner.
- Next, select the
psoc6-evaluationkit-062S2development board support package directory to import.
Compile and Download
- Click the Build option in the upper left corner of the IDE to compile the project.
-
When compiling without error warning, click
DebugorDownloadoption for debugging/downloading.Note: If there is no message displayed on the serial terminal after clicking Download and downloading successfully, please press the reset button manually to restart the operation.
Run Result
After downloading the program successfully, the system will run automatically. Open the terminal tool serial assistant, and select the baud rate as 115200. After reset the device, the LED will flash at 500HZ, and you can see the output information of RT-Thread in the terminal:
Note: It is recommended to use a serial debugging assistant, such as MobaXterm.
\ | /
- RT - Thread Operating System
/ | \ 4.1.1 build Jul 25 2022 18:03:35
2006 - 2022 Copyright by RT-Thread team
msh >
Contact
Maintainer: