Commit Graph
5424 Commits
Author SHA1 Message Date
hanzhijian 67861fa4fd [drivers][virtio] Fix RX buffer leak on pbuf allocation failure 2026-11-05 18:30:59 +08:00
Old-Ding e2e507c499 drivers: fix CFI MTD array bounds checks (#11558)
* drivers: fix CFI MTD array bounds checks

Generated-by: OpenAI Codex
Signed-off-by: Old-Ding <35417409+Old-Ding@users.noreply.github.com>

* drivers: reject truncated CFI erase geometry

A truncated erase-region table leaves the full flash size registered
with only part of its sector geometry. Fail probing instead of exposing a
device whose erase address lookup can select the wrong sector.

Signed-off-by: Old-Ding <35417409+Old-Ding@users.noreply.github.com>

* drivers: fix CFI log indentation

Signed-off-by: Old-Ding <35417409+Old-Ding@users.noreply.github.com>

---------

Signed-off-by: Old-Ding <35417409+Old-Ding@users.noreply.github.com>
2026-11-05 18:30:26 +08:00
Adil Alperen ÇiftciandAdil Alperen Ciftci d279c43627 dfs/posix: validate bounds and safely detach listener in signalfd_close (#11935)
* dfs/posix: enforce bounds check and clean unregister in signalfd

Validate array bounds on signalfd notification registration and remove
the unsafe global index counter.

Tie the registered process lifetime to the registration: each slot in
sfd->lwp[] holds an LWP reference, and the listener node carries a detach
hook that the process exit path runs under LWP_LOCK to unlink the node,
clear the slot and drop the reference. Final close therefore never walks
a freed process, and a child that registered through an inherited
descriptor is unregistered when it exits.

Move every change of lwp->signalfd_notify_head behind lwp_signal_notify_*
helpers in the lwp core, which take LWP_LOCK, the lock lwp_signal_notify()
traverses the list under. The lock order is LWP_LOCK -> sfd->lock, the
same order the signal path already uses; sfd->lock is never held while
taking LWP_LOCK, and a node is only unlinked under LWP_LOCK, so no
in-flight notification can be inside it when it is freed.

Tear down the vnode, context and mutex before fd_release() when the
initial registration fails, and return instead of falling through to
freed objects. Propagate registration failures: read returns the error
and poll reports POLLERR before anything is added to the poll queue.

Fixes: #11933
Signed-off-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>

* dfs/posix: state the signalfd context lifetime and tighten close

State the lifetime assumption of the signalfd context explicitly: the
descriptor the caller operates on pins the context for the whole read,
poll and registration, and a concurrent close of that same descriptor by
another thread is not supported, which is what the existing read and poll
paths already rely on. The post-registration slot re-check therefore does
not add a new requirement.

Clear all registration slots in one pass under sfd->lock in close and run
the per-process unlink and reference drop outside the lock afterwards, so
the "clear first, unlink later" invariant is one block instead of a lock
round-trip per slot.

Rename SIGNALFD_SHART_MAX to SIGNALFD_SHARE_MAX while the macro block is
being touched.

Signed-off-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>

* dfs/posix: keep the LWP lock out of signalfd close and make registration atomic

dfs_file_close() calls the signalfd close callback under the global DFS
file lock, and the process exit path takes that same lock while it already
holds LWP_LOCK (__exit_files() under _resr_cleanup()). Unlinking the
listeners from close() through lwp_signal_notify_remove_queue() therefore
took the two locks in the opposite order to process exit, and a parent
closing a shared signalfd while a registered child exits could block each
side on the other's lock.

Close no longer takes any LWP lock. It marks the context closing, detaches
it from the vnode and submits a release work item to the system workqueue.
The work takes the slots over under sfd->lock, unlinks the listeners under
each process's own LWP_LOCK with no other lock held, drops the references
the slots owned, and frees the context. A process that exits before the
work runs has already cleared its slot and dropped its reference through
the exit hook, so the work only sees slots that are still live.

Registration now does the lookup, the slot assignment and the listener
insertion in one critical section under LWP_LOCK(self) -> sfd->lock, the
same order the exit hook already uses. A slot is never visible without its
listener, so a second thread cannot observe a registration whose listener
is still missing, and the lookup cannot go stale between the check and the
assignment. lwp_signal_notify_add() accordingly expects the caller to hold
LWP_LOCK; the single-node unlink helper that the post-registration
re-check used is gone with that re-check. A registration that races with
close finds the closing flag and fails with EBADF instead of taking a slot
the release work will not see.

Signed-off-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>

* dfs/posix: do not allocate for an existing signalfd registration

signalfd_add_notify() allocated the listener node before looking the
calling process up, so read and poll on an already registered descriptor
failed with ENOMEM or POLLERR under memory pressure even though no node
was needed and a signal may already have been queued.

Look the process up first, under LWP_LOCK(self) -> sfd->lock, and return
from there when it is registered or the context is closing. Only when a
new registration is needed drop the locks, allocate the node, take the
locks again and repeat the lookup unconditionally: the closing flag, an
existing registration and the free slot are all re-evaluated before the
slot is assigned and the listener is linked in the same critical section.
A node left over because another thread registered the process meanwhile
is freed after the locks are released.

Signed-off-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>

* dfs/posix: align signalfd context member comments for clang-format

Signed-off-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>

---------

Signed-off-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>
Co-authored-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>
2026-11-05 16:37:23 +08:00
40e07d970e [smart] lwp: enforce user buffer validation and copyin/copyout in terminal ioctl (#11941)
* [smart] lwp: enforce user buffer validation and copyin/copyout in terminal ioctl

In the RT-Smart terminal subsystem, userspace ioctl commands (such as TIOCGWINSZ, TIOCSWINSZ, TIOCGPGRP, TIOCGSID, FIONREAD, and TIOCGPTN) were previously passed directly to underlying FreeBSD ioctl handlers as raw user pointers without kernel staging or copy validation.

This patch addresses the user pointer dereference sinks:
1. In lwp_tty_ioctl_adapter(), stage arguments in kernel stack buffers and use _copy_from_user() / _copy_to_user() (lwp_get_from_user / lwp_put_to_user) for TIOCGWINSZ, TIOCSWINSZ, TIOCGPGRP, TIOCSPGRP, TIOCGSID, TIOCSTI, TIOCOUTQ, FIONREAD, and modem commands.
2. In ptm_fops_ioctl(), safely buffer arguments for TIOCGPTN, TIOCPKT, TIOCSIG, TIOCGPGRP, TIOCGSID, FIONREAD, TIOCOUTQ, TIOCGWINSZ, TIOCSWINSZ, and termios settings, returning -ENOTTY on unrecognized commands.
3. In tty_generic_ioctl(), add defense-in-depth boundary checks using lwp_in_user_space() to safeguard kernel memory from arbitrary pointer dereferences.

Signed-off-by: Adil Alperen Çiftci <adilalperenciftci@users.noreply.github.com>

* [smart] lwp: make the tty ioctl adapters the single uaccess boundary

lwp_tty_ioctl_adapter() and ptm_fops_ioctl() (through
lwp_ptmx_ioctl_forward()) already stage every user argument into a kernel
buffer before entering the BSD tty layer, so tty_generic_ioctl() only ever
sees kernel pointers on the syscall path. Drop the lwp_in_user_space()
branches that were added there, and the older one on TIOCSPGRP, so the
trust boundary is in exactly one place per entry point and the switch no
longer mixes two models.

Zero the staging union in lwp_ptmx_ioctl_forward() before the backend
runs: an *_OUT command copies it back to the caller, and a backend that
returns 0 without filling it would otherwise hand out stack contents.

Add the BSD termios commands TIOCGETA, TIOCSETA, TIOCSETAW and TIOCSETAF
to the /dev/ptmx argument table so they keep reaching the tty layer as
they did before the table existed. The termio-based TCGETA family is not
handled by the BSD layer on this path and stays ENOTTY, as before.

Rename lwp_ptmx_ioctl_arg_type() to lwp_ptmx_ioctl_arg_type_get() so the
function no longer shares its name with the enum tag, rename the test
case to testcases.lwp.tty_ptmx.regression since it covers more than the
buffer bounds, and add the terminal directory to the utest CPPPATH
instead of a relative include.

Signed-off-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>

* [smart] lwp: drop duplicate termios cases from the ptmx ioctl table

In this port TIOCGETA and TIOCSETA/TIOCSETAW/TIOCSETAF are defined to the
same values as TCGETS and TCSETS/TCSETSW/TCSETSF, so listing both sets
makes the switch fail to compile with duplicate case values. The TCGETS
family entries already cover the BSD names; the test asserts for the BSD
spellings stay valid through the aliases.

Signed-off-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>

---------

Signed-off-by: Adil Alperen Çiftci <adilalperenciftci@users.noreply.github.com>
Signed-off-by: Adil Alperen Ciftci <adilalperenciftci@users.noreply.github.com>
Co-authored-by: Adil Alperen Çiftci <adilalperenciftci@users.noreply.github.com>
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
2026-11-05 16:11:50 +08:00
liangzhan5 7feb0edadb [components][ofw]fix: add depth limit check for fdt_unflatten to prevent stack flow #11901 2026-11-05 16:05:45 +08:00
seteiro 5a385acca1 utest/watchdog: tolerate timeout quantize and non-stoppable close (#11446) 2026-11-05 15:52:18 +08:00
seteiroandGrok 6e7f9e3a37 [utest][watchdog] Add watchdog smoke test for #11446
Add components.drivers.watchdog.smoke covering device find/open and
timeout set/get. Optional start/keepalive/stop stays off by default
to avoid board reset when STOP is unsupported.

Co-Authored-By: Grok <seteiro@mail.grokbot.com>
2026-11-05 15:52:18 +08:00
usualtreee 964dd80240 [drivers][nvme] Fix inactive namespace allocation leaks (#11920)
Allocate namespace devices only after validation and release them on registration failure.
2026-11-05 14:11:03 +08:00
usualtreee 995cb5ac3a [dfs][9pfs] Bound response parsing by received data length (#11918)
Validate error codes and limit file and directory parsing to the received reply while preserving unaligned access fixes.
2026-11-05 13:50:52 +08:00
usualtreee bd99153931 [utest][i2c] 增加 I2C 框架模拟总线测试 (#11982)
覆盖消息转发、10 位地址、错误传播、锁释放和收发返回值。
2026-11-05 11:18:32 +08:00
usualtreee 54862ee1e8 [utest][dac] 增加 DAC 框架模拟设备测试 (#11976)
覆盖设备注册、通道控制、数据写入、错误传播及重复执行。
2026-11-05 11:18:17 +08:00
Chen Moushun 7b0edb4979 [drivers][ipc] 校验 pipe ioctl 用户指针 (#11971)
在用户态 ioctl 路径验证目标地址并检查回拷长度。
2026-11-05 11:18:03 +08:00
usualtreee 3277e831bf [drivers][graphic] 拒绝非法帧缓冲偏移 (#11970)
在读写长度计算前拒绝负偏移和缓冲区外偏移。
2026-11-05 11:17:49 +08:00
Zhang Yuyang b5de39d977 [drivers][virtio] 修复 RPMsg 探测错误及 NS 资源泄漏 (#11968)
传播 NS 分配错误,并在注册失败和卸载路径释放资源。
2026-11-05 11:17:34 +08:00
usualtreee c4d85d8628 [net][dhcp] 限制地址池耗尽后的客户端分配 (#11947)
在地址池遍历完成后退出分配,避免持续分配客户端对象。
2026-11-05 11:17:07 +08:00
陈泽堂 0aae54ae97 [drivers][serial] 保留共享串口的接收回调 (#11931)
仅在最后一个使用者关闭串口时清理接收回调。
2026-11-05 11:16:53 +08:00
Bernard Xiong 4d1e4e58f0 [lwp] 校验 sigaction 信号编号 (#11899)
在信号处理表访问前校验信号编号,避免越界访问。
2026-11-05 11:16:16 +08:00
Bernard Xiong f14ab20efd [lwp] 修复信号顺序与 ELF 段保护 (#11895)
修正信号处理顺序和 ELF 段的内存保护设置。
2026-11-05 11:16:02 +08:00
Bernard Xiong b47754d44b [sdio] 在块配置完成后设置块大小 (#11886)
使用块设备配置完成后的实际块大小初始化存储参数。
2026-11-05 11:15:36 +08:00
Chen Moushun 47831b7386 [dfs][9pfs] 修复协议字段未对齐访问 (#11876)
通过局部对齐变量读写协议字段,补充错误码边界检查和打开状态初始化。
2026-11-05 11:14:57 +08:00
陈泽堂 af3eb7b811 [usb][hid] 修正接口描述符协议选择 (#11873)
根据键盘和鼠标配置选择 HID 接口协议,并同步复合设备描述符。
2026-11-05 10:58:37 +08:00
Bernard Xiong f6857f9fb0 [DM/PCI] Validate MSI-X table BIR and offset against BAR (#11986)
* [DM/PCI] Validate MSI-X table BIR and offset against BAR

BIR and the table offset in the MSI-X capability are controlled by the
device. msix_table_remap() used BIR directly as an index into
pdev->resource[] and never checked the table against the BAR size, so a
malicious device could make the kernel map and write to an arbitrary
physical address during probe.

Reject out-of-range BIR values, unassigned or zero-sized BARs, and
tables that do not fit completely inside the assigned BAR. Also verify
that the requested vector count does not exceed the table size read
from the MSI-X control register.

Fixes #11985

* [DM/PCI] Fix cppcheck warnings in MSI-X code

- Restore the default IRQ only when an MSI descriptor exists, avoiding
  a potential NULL pointer dereference in rt_pci_msi_shutdown
- Initialize the error code in msix_setup_msi_descs so that an empty
  vector list returns a defined value
2026-11-05 10:47:23 +08:00
Bernard Xiong d3a368d565 [drivers][serial] improve TIOCGWINSZ and termios updates #11891 2026-11-04 21:33:18 +08:00
bernardandDeepSeek 4.1 Flash d59285201a [drivers][block] reject GPT entries with ending_lba before starting_lba
is_pte_valid() accepted a GPT entry as long as both LBAs were inside the
disk, so a crafted image could set ending_lba < starting_lba. The size
computed in efi_partition() then underflowed to a huge value and was
registered as the logical partition size.

Reject entries whose end LBA is below the start LBA, and compute the
partition start/size only after the entry passed validation. This avoids
evaluating the underflow at all and reuses the validated start value for
the size calculation.

Fixes RT-Thread/rt-thread#11271.

Co-authored-by: DeepSeek 4.1 Flash <noreply@deepseek.com>
2026-11-04 21:30:29 +08:00
bernardandClaude Code 9e29e3246b [components][lwp] harden sys_getaddrinfo user pointer handling
sys_getaddrinfo() validated the top-level res buffer, then wrote the
resolved socket address through res->ai_addr, a user-controlled nested
pointer that was never checked. On Smart/MMU builds a user program could
therefore turn getaddrinfo() into an arbitrary kernel write. The hints
fields were also read directly from user memory after the access check,
leaving a TOCTOU window.

Copy res and hints into kernel temporaries with lwp_get_from_user() so
all nested pointers come from one validated snapshot. Write the nested
sockaddr and the outer addrinfo back with lwp_put_to_user(), which
validates the destination range and never dereferences an unchecked user
pointer in kernel context.

Also fix the servname copy check (a size_t result can never be < 0),
allocate the kernel addrinfo with sizeof(*k_hints), and release k_res on
the new error paths.

Co-Authored-By: Claude Code <noreply@anthropic.com>
2026-11-03 09:04:56 +08:00
GuEe-GUI 2c88a3b698 [drivers][scmi] Fix reset provider lookup and driver registration order
- register SCMI reset and power-domain drivers during subsystem initialization
- resolve SCMI reset state through the reset-controller provider
- use the parsed DT reset domain ID when querying reset attributes
- retain the SCMI device reference in the reset provider instance

Signed-off-by: GuEe-GUI <2991707448@qq.com>
2026-11-02 18:20:45 +08:00
Old-Ding 08cad4ee9c usbdevice: clamp OS compatible ID response length 2026-11-02 11:47:57 +08:00
Old-Ding cb9dc59180 usbdevice: validate string descriptor index 2026-11-02 11:47:07 +08:00
zhangyangysuandyang.zhang 7e7237d644 Fix stack corruption in rt_sdhci_init_host() (#11542)
* lwp: fix pid leak on exec failure before task startup

When msh tries to execute a non-ELF path, lwp_execve() may allocate a PID
before lwp_load() fails. The old error path only dropped the LWP reference,
leaving the PID tree entry pointing to a freed LWP.

In an init-less boot flow, this can poison pid 1 after a failed command from
msh. A later LWP launch may then treat the stale pid 1 entry as a valid parent
LWP, resulting in invalid pgrp/session state and a job-control assertion during
process exit.

Add lwp_pid_rollback() for exec/spawn failures before the process becomes
runnable. Unlike lwp_pid_put(), it always releases the PID lock and does not
enter the "no more pid allocation" state when the PID tree becomes empty.

Use the rollback helper in lwp_execve() failure paths after PID allocation.

Signed-off-by: zhangyang <gaoshanliukou@163.com>

* [drivers][sdio] avoid SDHCI device name stack overflow

rt_sdhci_init_host() allocated a fixed 32-byte buffer for device-derived object names, but sdio_host_set_name() may copy up to RT_NAME_MAX bytes into the output buffer. When RT_NAME_MAX is larger than 32, this can overwrite the stack and corrupt nearby locals.

Size the temporary name buffer with RT_NAME_MAX, force it to be NUL-terminated, and derive the append offset from the actual string length. Also replace the suffix rt_sprintf() calls with bounded rt_snprintf() so timer and workqueue suffixes cannot overflow the buffer when the base name is already close to RT_NAME_MAX.

Signed-off-by: zhangyangysu <zhangyangysu0928@gmail.com>

---------

Signed-off-by: zhangyang <gaoshanliukou@163.com>
Signed-off-by: zhangyangysu <zhangyangysu0928@gmail.com>
Co-authored-by: yang.zhang <zhangyang01@kylinos.cn>
2026-11-02 11:24:11 +08:00
usualtreee 506dbc6d6a [dlmodule] fix: uninitialized globals in relocatable modules (#11915) 2026-10-30 10:54:53 +08:00
bernard 6b287856f9 [components][lwp] apply clang-format to syscall sources
- format the newly split syscall implementation files
- no functional change
2026-10-29 14:50:07 +08:00
bernard 68757abdcc [components][lwp] split syscall implementation by subsystem
- move syscall implementations from lwp_syscall.c into syscall/
- group memory, file, socket, process, IPC and time syscalls
- add a shared syscall dispatch table and internal header
- register the new directory from the LWP build script
- no functional change
2026-10-29 14:50:07 +08:00
bernard b4c6828cf4 [components][lwp] fix TTY init format and control character copy
- place the TIOCLINUX case brace on its own line
- use sizeof(tty_ctrl_charset) directly as the memcpy size
- fix the cppcheck sizeofDivisionMemfunc warning
2026-10-29 14:48:33 +08:00
bernard 24c624aa7a [components][lwp] handle TIOCLINUX and default window size
- return zero keyboard modifiers for TIOCLINUX instead of failing
- keep terminal applications that probe console state working
- initialize the TTY window size to 24x80 when none is reported
2026-10-29 14:48:33 +08:00
Huoyanlifusu 6040d6cf2c [components][netdev] Fix ping maximum & minimum latency counting 2026-10-29 09:33:44 +08:00
Bernard Xiong b88861d285 [bsp][qemu-virt64] enable RT-Thread Smart #11896 2026-10-29 09:29:21 +08:00
usualtree 30a61febbe [dhcp] fix raw server option bounds checks
Validate option headers and declared lengths before walking or returning options. Check minimum value sizes at the MESSAGE_TYPE and REQUESTED_IP call sites and bound parsing by the received packet length.

Fixes: #11913
2026-10-28 19:04:31 +08:00
CYFS3 ff82e23d13 style: format code with clang-format [skip ci] 2026-10-28 14:44:20 +08:00
CYFS 90e06f354b utest: stabilize CI test execution 2026-10-28 14:44:20 +08:00
CYFS 58d1377f01 utest: keep testcase failures across units 2026-10-28 14:44:20 +08:00
bernard e6905134d5 [drivers][8250] honor register width for ns16550 earlycon
- read reg-shift and reg-io-width from the device tree
- select the MMIO access width from reg-io-width
- reject unsupported register widths during early setup
- keep the generic 8250 path for other compatibles
2026-10-27 19:26:35 +08:00
bernard 6bce506bed [libc] use DFS file operations in poll
- resolve fops from dfs_file instead of vnode directly
- keep compatibility with both DFSv1 and DFSv2
- validate fops before dereferencing to avoid NULL access
2026-10-27 19:21:46 +08:00
Bernard Xiong 9e7065c85a [net][sal] validate RAW socket protocol (#11888)
* [net][sal] validate RAW socket protocol

- replace the IPPROTO_RAW-only check with VALID_PROTOCOL()
- allow RAW sockets for protocols such as ICMP
- keep the existing domain and type validation unchanged

* [net][sal] fix clang-format alignment

- align the macro continuation after the RAW protocol check
- no functional change
2026-10-27 19:21:16 +08:00
bernard f29b9ae21c [dfs] fix UTIME_OMIT handling in utimensat
- UTIME_OMIT means the corresponding timestamp must not be changed
- the inverted condition overwrote mtime and ignored a valid timestamp
- correct the comparison so UTIME_OMIT leaves the attribute untouched
2026-10-27 19:20:33 +08:00
bernard 9e6dec3b14 [net][lwip] add loopback netdev support
- add RT_LWIP_USING_LOOPBACK as a configurable option
- register lo/lo0 as a netdev and bring the link up
- make loopback the default interface when none is configured
- increase the RAW receive mailbox size for loopback echo
2026-10-25 19:26:53 +08:00
GUI 1c801efabc [bsp][spacemit/k1] first version #11132 2026-10-19 18:49:16 +08:00
seteiroandGrok 54f5cac5b4 drivers/misc: register rt_null at BOARD init for default console (#11472)
rt_console_set_device() is typically called in rt_hw_board_init() right
after rt_components_board_init(). null was INIT_DEVICE (level 3), so it
was not registered yet and could not be RT_CONSOLE_DEVICE_NAME.

Raise to INIT_BOARD_EXPORT; null is a pure software sink with no HW deps.

Co-Authored-By: Grok <seteiro@mail.grokbot.com>
2026-10-19 16:53:09 +08:00
zhangyuyang 8159dc81b7 [drivers][touch] Remove redundant path from global CPPPATH
The touch framework has no private headers in its source directory, so
adding the directory to CPPPATH is unnecessary. Remove it to avoid
polluting the global header search path, as discussed in #10980.
2026-10-17 16:42:48 +08:00
GUIandseteiro 8d8dc96b67 [ARCH/RISC-V] Next RISC-V (#10320)
* [libcpu][risc-v] Refactor the RISC-V architecture port

Introduce an opt-in unified RISC-V common layer for RV32 and RV64 while keeping existing BSPs on the legacy implementation during migration.

- use ARCH_RISCV and ARCH_CPU_64BIT for architecture and XLEN selection
- unify context, trap, MMU, cache, timer, SBI, SMP and ISA handling
- add PLIC, CLIC, ACLINT, APLIC and IMSIC support
- map physical hart IDs to contiguous logical CPU IDs
- add T-Head vendor overrides while preserving legacy ports
- migrate qemu-virt64-riscv with RV32 and RV64 support
- update clock_time, MM, LWP, OFW, PCI and Rust integration

Existing BSPs continue using legacy_common or common64 unless they select RT_USING_RISCV_NEW_COMMON.

Signed-off-by: GuEe-GUI <2991707448@qq.com>

* [libcpu][risc-v] skip disabled CPU nodes in early FDT walk

Rbb666 noted that rt_hw_fdt_install_early() walked every /cpus child
without checking status, so disabled cores still joined hart registration
and MMU capability probing. Skip nodes that are not okay/ok via
rt_fdt_device_is_available() before reading reg or mmu-type.

Signed-off-by: seteiro <chenmoushun@163.com>

* [libcpu][risc-v] Fix per-CPU page table mapping

- reuse existing non-leaf page table entries when mapping per-CPU areas
- reject leaf entry conflicts instead of overwriting mappings

Signed-off-by: GuEe-GUI <2991707448@qq.com>

---------

Signed-off-by: GuEe-GUI <2991707448@qq.com>
Signed-off-by: seteiro <chenmoushun@163.com>
Co-authored-by: seteiro <chenmoushun@163.com>
2026-10-17 09:44:26 +08:00
Huoyanlifusu 5d1fb66d13 [drivers][ofw] Fix phandle hash buffer overflow 2026-10-15 13:50:46 +08:00