diff --git a/bsp/swm320/.config b/bsp/swm320/.config index 5529255910..3074c3e8a6 100644 --- a/bsp/swm320/.config +++ b/bsp/swm320/.config @@ -21,6 +21,13 @@ CONFIG_RT_USING_IDLE_HOOK=y CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 CONFIG_IDLE_THREAD_STACK_SIZE=256 # CONFIG_RT_USING_TIMER_SOFT is not set + +# +# kservice optimization +# +# CONFIG_RT_KSERVICE_USING_STDLIB is not set +# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set +# CONFIG_RT_USING_ASM_MEMCPY is not set CONFIG_RT_DEBUG=y CONFIG_RT_DEBUG_COLOR=y # CONFIG_RT_DEBUG_INIT_CONFIG is not set @@ -54,6 +61,7 @@ CONFIG_RT_USING_MEMHEAP=y # CONFIG_RT_USING_SLAB is not set CONFIG_RT_USING_MEMHEAP_AS_HEAP=y # CONFIG_RT_USING_USERHEAP is not set +# CONFIG_RT_USING_MEMTRACE is not set CONFIG_RT_USING_HEAP=y # @@ -64,8 +72,9 @@ CONFIG_RT_USING_DEVICE=y # CONFIG_RT_USING_INTERRUPT_INFO is not set CONFIG_RT_USING_CONSOLE=y CONFIG_RT_CONSOLEBUF_SIZE=128 -CONFIG_RT_CONSOLE_DEVICE_NAME="uart0" -CONFIG_RT_VER_NUM=0x40003 +CONFIG_RT_CONSOLE_DEVICE_NAME="uart1" +# CONFIG_RT_PRINTF_LONGLONG is not set +CONFIG_RT_VER_NUM=0x40004 CONFIG_ARCH_ARM=y CONFIG_RT_USING_CPU_FFS=y CONFIG_ARCH_ARM_CORTEX_M=y @@ -89,19 +98,19 @@ CONFIG_RT_MAIN_THREAD_PRIORITY=10 # Command shell # CONFIG_RT_USING_FINSH=y +CONFIG_RT_USING_MSH=y +CONFIG_FINSH_USING_MSH=y CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 CONFIG_FINSH_USING_HISTORY=y CONFIG_FINSH_HISTORY_LINES=5 CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_CMD_SIZE=80 +CONFIG_MSH_USING_BUILT_IN_COMMANDS=y CONFIG_FINSH_USING_DESCRIPTION=y # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set -CONFIG_FINSH_THREAD_PRIORITY=20 -CONFIG_FINSH_THREAD_STACK_SIZE=4096 -CONFIG_FINSH_CMD_SIZE=80 # CONFIG_FINSH_USING_AUTH is not set -CONFIG_FINSH_USING_MSH=y -CONFIG_FINSH_USING_MSH_DEFAULT=y -# CONFIG_FINSH_USING_MSH_ONLY is not set CONFIG_FINSH_ARG_MAX=10 # @@ -116,6 +125,8 @@ CONFIG_RT_USING_DEVICE_IPC=y CONFIG_RT_PIPE_BUFSZ=512 # CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set CONFIG_RT_USING_SERIAL=y +CONFIG_RT_USING_SERIAL_V1=y +# CONFIG_RT_USING_SERIAL_V2 is not set # CONFIG_RT_SERIAL_USING_DMA is not set CONFIG_RT_SERIAL_RB_BUFSZ=64 # CONFIG_RT_USING_CAN is not set @@ -154,6 +165,7 @@ CONFIG_RT_USING_PIN=y CONFIG_RT_USING_LIBC=y # CONFIG_RT_USING_PTHREADS is not set # CONFIG_RT_USING_MODULE is not set +CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8 # # Network @@ -190,8 +202,14 @@ CONFIG_RT_USING_LIBC=y # CONFIG_RT_USING_RYM is not set # CONFIG_RT_USING_ULOG is not set # CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_RT_LINK is not set # CONFIG_RT_USING_LWP is not set +# +# RT-Thread Utestcases +# +# CONFIG_RT_USING_UTESTCASES is not set + # # RT-Thread online packages # @@ -239,6 +257,7 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_AT_DEVICE is not set # CONFIG_PKG_USING_ATSRV_SOCKET is not set # CONFIG_PKG_USING_WIZNET is not set +# CONFIG_PKG_USING_ZB_COORDINATOR is not set # # IoT Cloud @@ -259,8 +278,6 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_LIBRWS is not set # CONFIG_PKG_USING_TCPSERVER is not set # CONFIG_PKG_USING_PROTOBUF_C is not set -# CONFIG_PKG_USING_ONNX_PARSER is not set -# CONFIG_PKG_USING_ONNX_BACKEND is not set # CONFIG_PKG_USING_DLT645 is not set # CONFIG_PKG_USING_QXWZ is not set # CONFIG_PKG_USING_SMTP_CLIENT is not set @@ -275,6 +292,13 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_BTSTACK is not set # CONFIG_PKG_USING_LORAWAN_ED_STACK is not set # CONFIG_PKG_USING_WAYZ_IOTKIT is not set +# CONFIG_PKG_USING_MAVLINK is not set +# CONFIG_PKG_USING_RAPIDJSON is not set +# CONFIG_PKG_USING_BSAL is not set +# CONFIG_PKG_USING_AGILE_MODBUS is not set +# CONFIG_PKG_USING_AGILE_FTP is not set +# CONFIG_PKG_USING_EMBEDDEDPROTO is not set +# CONFIG_PKG_USING_RT_LINK_HW is not set # # security packages @@ -291,6 +315,7 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_LUA is not set # CONFIG_PKG_USING_JERRYSCRIPT is not set # CONFIG_PKG_USING_MICROPYTHON is not set +# CONFIG_PKG_USING_PIKASCRIPT is not set # # multimedia packages @@ -300,9 +325,13 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_STEMWIN is not set # CONFIG_PKG_USING_WAVPLAYER is not set # CONFIG_PKG_USING_TJPGD is not set +# CONFIG_PKG_USING_PDFGEN is not set # CONFIG_PKG_USING_HELIX is not set # CONFIG_PKG_USING_AZUREGUIX is not set # CONFIG_PKG_USING_TOUCHGFX2RTT is not set +# CONFIG_PKG_USING_NUEMWIN is not set +# CONFIG_PKG_USING_MP3PLAYER is not set +# CONFIG_PKG_USING_TINYJPEG is not set # # tools packages @@ -311,6 +340,7 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_EASYFLASH is not set # CONFIG_PKG_USING_EASYLOGGER is not set # CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_SEGGER_RTT is not set # CONFIG_PKG_USING_RDB is not set # CONFIG_PKG_USING_QRCODE is not set # CONFIG_PKG_USING_ULOG_EASYFLASH is not set @@ -339,33 +369,23 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_ANV_MEMLEAK is not set # CONFIG_PKG_USING_ANV_TESTSUIT is not set # CONFIG_PKG_USING_ANV_BENCH is not set +# CONFIG_PKG_USING_DEVMEM is not set +# CONFIG_PKG_USING_REGEX is not set +# CONFIG_PKG_USING_MEM_SANDBOX is not set +# CONFIG_PKG_USING_SOLAR_TERMS is not set +# CONFIG_PKG_USING_GAN_ZHI is not set # # system packages # -# CONFIG_PKG_USING_GUIENGINE is not set -# CONFIG_PKG_USING_PERSIMMON is not set -# CONFIG_PKG_USING_CAIRO is not set -# CONFIG_PKG_USING_PIXMAN is not set -# CONFIG_PKG_USING_LWEXT4 is not set -# CONFIG_PKG_USING_PARTITION is not set -# CONFIG_PKG_USING_FAL is not set -# CONFIG_PKG_USING_FLASHDB is not set -# CONFIG_PKG_USING_SQLITE is not set -# CONFIG_PKG_USING_RTI is not set -# CONFIG_PKG_USING_LITTLEVGL2RTT is not set -# CONFIG_PKG_USING_CMSIS is not set -# CONFIG_PKG_USING_DFS_YAFFS is not set -# CONFIG_PKG_USING_LITTLEFS is not set -# CONFIG_PKG_USING_THREAD_POOL is not set -# CONFIG_PKG_USING_ROBOTS is not set -# CONFIG_PKG_USING_EV is not set -# CONFIG_PKG_USING_SYSWATCH is not set -# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set -# CONFIG_PKG_USING_PLCCORE is not set -# CONFIG_PKG_USING_RAMDISK is not set -# CONFIG_PKG_USING_MININI is not set -# CONFIG_PKG_USING_QBOOT is not set + +# +# acceleration: Assembly language or algorithmic acceleration packages +# +# CONFIG_PKG_USING_RT_MEMCPY_CM is not set +# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set +# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set +# CONFIG_PKG_USING_QFPLIB_M3 is not set # # Micrium: Micrium software products porting for RT-Thread @@ -376,14 +396,39 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_UC_CLK is not set # CONFIG_PKG_USING_UC_COMMON is not set # CONFIG_PKG_USING_UC_MODBUS is not set +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_PERSIMMON is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_FLASHDB is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_LITTLEVGL2RTT is not set +# CONFIG_PKG_USING_CMSIS is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_DFS_JFFS2 is not set +# CONFIG_PKG_USING_DFS_UFFS is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set +# CONFIG_PKG_USING_RAMDISK is not set +# CONFIG_PKG_USING_MININI is not set +# CONFIG_PKG_USING_QBOOT is not set # CONFIG_PKG_USING_PPOOL is not set # CONFIG_PKG_USING_OPENAMP is not set # CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set -# CONFIG_PKG_USING_RT_MEMCPY_CM is not set -# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set -# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set -# CONFIG_PKG_USING_QFPLIB_M3 is not set # CONFIG_PKG_USING_LPM is not set +# CONFIG_PKG_USING_TLSF is not set +# CONFIG_PKG_USING_EVENT_RECORDER is not set +# CONFIG_PKG_USING_ARM_2D is not set +# CONFIG_PKG_USING_WCWIDTH is not set # # peripheral libraries and drivers @@ -408,7 +453,6 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_WM_LIBRARIES is not set # CONFIG_PKG_USING_KENDRYTE_SDK is not set # CONFIG_PKG_USING_INFRARED is not set -# CONFIG_PKG_USING_ROSSERIAL is not set # CONFIG_PKG_USING_AGILE_BUTTON is not set # CONFIG_PKG_USING_AGILE_LED is not set # CONFIG_PKG_USING_AT24CXX is not set @@ -446,10 +490,55 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_VIRTUAL_SENSOR is not set # CONFIG_PKG_USING_VDEVICE is not set # CONFIG_PKG_USING_SGM706 is not set +# CONFIG_PKG_USING_STM32WB55_SDK is not set +# CONFIG_PKG_USING_RDA58XX is not set +# CONFIG_PKG_USING_LIBNFC is not set +# CONFIG_PKG_USING_MFOC is not set +# CONFIG_PKG_USING_TMC51XX is not set +# CONFIG_PKG_USING_TCA9534 is not set +# CONFIG_PKG_USING_KOBUKI is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_MICRO_ROS is not set +# CONFIG_PKG_USING_MCP23008 is not set +# CONFIG_PKG_USING_BLUETRUM_SDK is not set + +# +# AI packages +# +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_QUEST is not set +# CONFIG_PKG_USING_NAXOS is not set # # miscellaneous packages # + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set + +# +# entertainment: terminal games and other interesting software packages +# +# CONFIG_PKG_USING_CMATRIX is not set +# CONFIG_PKG_USING_SL is not set +# CONFIG_PKG_USING_CAL is not set +# CONFIG_PKG_USING_ACLOCK is not set +# CONFIG_PKG_USING_THREES is not set +# CONFIG_PKG_USING_2048 is not set +# CONFIG_PKG_USING_SNAKE is not set +# CONFIG_PKG_USING_TETRIS is not set +# CONFIG_PKG_USING_DONUT is not set # CONFIG_PKG_USING_LIBCSV is not set # CONFIG_PKG_USING_OPTPARSE is not set # CONFIG_PKG_USING_FASTLZ is not set @@ -460,44 +549,25 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set # CONFIG_PKG_USING_CANFESTIVAL is not set # CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_MINIZIP is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set # CONFIG_PKG_USING_KENDRYTE_DEMO is not set # CONFIG_PKG_USING_DIGITALCTRL is not set # CONFIG_PKG_USING_UPACKER is not set # CONFIG_PKG_USING_UPARAM is not set - -# -# samples: kernel and components samples -# -# CONFIG_PKG_USING_KERNEL_SAMPLES is not set -# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set -# CONFIG_PKG_USING_NETWORK_SAMPLES is not set -# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set # CONFIG_PKG_USING_VI is not set # CONFIG_PKG_USING_KI is not set -# CONFIG_PKG_USING_NNOM is not set -# CONFIG_PKG_USING_LIBANN is not set -# CONFIG_PKG_USING_ELAPACK is not set # CONFIG_PKG_USING_ARMv7M_DWT is not set # CONFIG_PKG_USING_VT100 is not set -# CONFIG_PKG_USING_ULAPACK is not set # CONFIG_PKG_USING_UKAL is not set # CONFIG_PKG_USING_CRCLIB is not set - -# -# games: games run on RT-Thread console -# -# CONFIG_PKG_USING_THREES is not set -# CONFIG_PKG_USING_2048 is not set -# CONFIG_PKG_USING_SNAKE is not set -# CONFIG_PKG_USING_TETRIS is not set # CONFIG_PKG_USING_LWGPS is not set -# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set # CONFIG_PKG_USING_STATE_MACHINE is not set # CONFIG_PKG_USING_MCURSES is not set # CONFIG_PKG_USING_COWSAY is not set +# CONFIG_PKG_USING_TERMBOX is not set # # Hardware Drivers Config @@ -508,8 +578,8 @@ CONFIG_SOC_SWM320=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_UART=y -CONFIG_BSP_USING_UART0=y -# CONFIG_BSP_USING_UART1 is not set +# CONFIG_BSP_USING_UART0 is not set +CONFIG_BSP_USING_UART1=y # CONFIG_BSP_USING_UART2 is not set # CONFIG_BSP_USING_UART3 is not set CONFIG_BSP_USING_GPIO=y diff --git a/bsp/swm320/README.md b/bsp/swm320/README.md index 356c4c7b15..417a7b2ef8 100644 --- a/bsp/swm320/README.md +++ b/bsp/swm320/README.md @@ -93,7 +93,7 @@ - 32K片内时钟源 - 2～32MHz片外晶振 -芯片更多详细信息请参考[华芯微特技术支持][http://www.synwit.cn/support-1/3.html]。 +芯片更多详细信息请参考[华芯微特技术支持](http://www.synwit.cn/support-1/3.html)。 ## 编译说明 @@ -119,7 +119,7 @@ - 使用 Jlink 连接开发板到 PC （需要 Jlink 驱动） -将串口 0 引脚为：`[PA2/PA3]`和 USB 转串口模块 P2 相连，串口配置方式为115200-N-8-1。 +将串口 1 引脚为：`[PC2/PC3]`和 USB 转串口模块 J11 相连，串口配置方式为115200-N-8-1。 当使用 [env工具](https://www.rt-thread.org/page/download.html) 正确编译产生出rtthread.bin映像文件后，可以使用 ISP 的方式来烧写到设备中。 @@ -166,4 +166,4 @@ msh /> * [RT-Thread 文档中心](https://www.rt-thread.org/document/site/) -* [SWM320数据手册](http://www.synwit.cn/support-1/3.html) +* [SWM320数据手册](https://www.synwit.cn/col.jsp?id=155) diff --git a/bsp/swm320/applications/main.c b/bsp/swm320/applications/main.c index 62e1250eb2..4b42c4936a 100644 --- a/bsp/swm320/applications/main.c +++ b/bsp/swm320/applications/main.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -10,7 +10,7 @@ #include #include -#define LED_PIN 21 +#define LED_PIN 32 int main(void) { @@ -29,7 +29,7 @@ int main(void) } // #ifdef RT_USING_PIN -// #define KEY1_PIN 25 +// #define KEY1_PIN 31 // void key1_cb(void *args) // { // rt_kprintf("key1 irq!\n"); @@ -46,7 +46,7 @@ int main(void) // #endif #ifdef RT_USING_ADC -#define ADC_DEV_NAME "adc0" +#define ADC_DEV_NAME "adc1" #define ADC_DEV_CHANNEL 0 #define REFER_VOLTAGE 330 #define CONVERT_BITS (1 << 12) @@ -64,16 +64,15 @@ static int adc_vol_sample(int argc, char *argv[]) return RT_ERROR; } - while (1) - { - ret = rt_adc_enable(adc_dev, ADC_DEV_CHANNEL); - value = rt_adc_read(adc_dev, ADC_DEV_CHANNEL); - rt_kprintf("the value is :%d,", value); - vol = value * REFER_VOLTAGE / CONVERT_BITS; - rt_kprintf("the voltage is :%d.%02d \n", vol / 100, vol % 100); - rt_thread_mdelay(500); - ret = rt_adc_disable(adc_dev, ADC_DEV_CHANNEL); - } + ret = rt_adc_enable(adc_dev, ADC_DEV_CHANNEL); + + value = rt_adc_read(adc_dev, ADC_DEV_CHANNEL); + rt_kprintf("the value is :%d,", value); + + vol = value * REFER_VOLTAGE / CONVERT_BITS; + rt_kprintf("the voltage is :%d.%02d \n", vol / 100, vol % 100); + + ret = rt_adc_disable(adc_dev, ADC_DEV_CHANNEL); return ret; } @@ -143,17 +142,17 @@ MSH_CMD_EXPORT(hwtimer_sample, hwtimer sample); #endif #ifdef RT_USING_PWM -#define PWM_DEV_NAME "pwm0" /* PWM???? */ -#define PWM_DEV_CHANNEL 0 /* PWM?? */ +#define PWM_DEV_NAME "pwm0" /* PWM设备名称 */ +#define PWM_DEV_CHANNEL 0 /* PWM通道 */ -struct rt_device_pwm *pwm_dev; /* PWM???? */ +struct rt_device_pwm *pwm_dev; /* PWM设备句柄 */ static int pwm_sample(int argc, char *argv[]) { rt_uint32_t period, pulse; - period = 500000; /* ???0.5ms,?????ns */ - pulse = 250000; /* PWM?????,?????ns */ + period = 500000; /* 周期为0.5ms,单位为纳秒ns */ + pulse = 250000; /* PWM脉冲宽度值,单位为纳秒ns */ pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME); if (pwm_dev == RT_NULL) @@ -170,26 +169,27 @@ MSH_CMD_EXPORT(pwm_sample, pwm sample); #endif #ifdef RT_USING_RTC +#include static int rtc_sample(int argc, char *argv[]) { rt_err_t ret = RT_EOK; time_t now; - ret = set_date(2020, 6, 15); + ret = set_date(2020, 2, 28); if (ret != RT_EOK) { rt_kprintf("set RTC date failed\n"); return ret; } - ret = set_time(11, 15, 50); + ret = set_time(23, 59, 55); if (ret != RT_EOK) { rt_kprintf("set RTC time failed\n"); return ret; } - rt_thread_mdelay(3000); + //rt_thread_mdelay(3000); now = time(RT_NULL); rt_kprintf("%s\n", ctime(&now)); @@ -205,7 +205,7 @@ static rt_device_t wdg_dev; static void idle_hook(void) { - rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, NULL); + rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, RT_NULL); rt_kprintf("feed the dog!\n "); } @@ -264,7 +264,7 @@ MSH_CMD_EXPORT(wdt_sample, wdt sample); static int rt_hw_spi_flash_init(void) { - rt_hw_spi_device_attach("spi0", "spi00", GPIOA, PIN12); + rt_hw_spi_device_attach("spi0", "spi00", GPIOP, PIN22); if (RT_NULL == rt_sfud_flash_probe(W25Q_FLASH_NAME, W25Q_SPI_DEVICE_NAME)) { @@ -273,7 +273,6 @@ static int rt_hw_spi_flash_init(void) return RT_EOK; } -/* ???????? */ INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init); static void spi_w25q_sample(int argc, char *argv[]) @@ -292,12 +291,12 @@ static void spi_w25q_sample(int argc, char *argv[]) rt_strncpy(name, W25Q_SPI_DEVICE_NAME, RT_NAME_MAX); } - /* ?? spi ???????? */ + /* 查找 spi 设备获取设备句柄 */ spi_dev_w25q = (struct rt_spi_device *)rt_device_find(name); struct rt_spi_configuration cfg; cfg.data_width = 8; cfg.mode = RT_SPI_MASTER | RT_SPI_MODE_0 | RT_SPI_MSB; - cfg.max_hz = 20 * 1000 * 1000; /* 20M */ + cfg.max_hz = 30 * 1000 * 1000; /* 20M */ rt_spi_configure(spi_dev_w25q, &cfg); if (!spi_dev_w25q) @@ -306,11 +305,11 @@ static void spi_w25q_sample(int argc, char *argv[]) } else { - /* ??1:?? rt_spi_send_then_recv()??????ID */ + /* 方式1：使用 rt_spi_send_then_recv()发送命令读取ID */ rt_spi_send_then_recv(spi_dev_w25q, &w25x_read_id, 1, id, 5); rt_kprintf("use rt_spi_send_then_recv() read w25q ID is:%x%x\n", id[3], id[4]); - /* ??2:?? rt_spi_transfer_message()??????ID */ + /* 方式2：使用 rt_spi_transfer_message()发送命令读取ID */ struct rt_spi_message msg1, msg2; msg1.send_buf = &w25x_read_id; @@ -352,7 +351,6 @@ static void spi_flash_elmfat_sample(void) rt_kprintf("Write string '%s' to /user/test.txt.\n", str); - /* ????????????,??????????????*/ fd = open("/user/test.txt", O_WRONLY | O_CREAT); if (fd >= 0) { @@ -362,7 +360,6 @@ static void spi_flash_elmfat_sample(void) close(fd); } - /* ????????? */ fd = open("/user/test.txt", O_RDONLY); if (fd >= 0) { @@ -397,7 +394,7 @@ MSH_CMD_EXPORT(spi_w25q_sample, spi w25q sample); //{ // int fd, size; // struct statfs elm_stat; -// char str[] = "elmfat mount to sdcard.\r\n", buf[80]; +// char str[] = "elmfat mount to sdcard.", buf[80]; // if (dfs_mkfs("elm", SDCARD_NAME) == 0) // rt_kprintf("make elmfat filesystem success.\n"); diff --git a/bsp/swm320/drivers/Kconfig b/bsp/swm320/drivers/Kconfig index cd638055a6..2ad515ae90 100644 --- a/bsp/swm320/drivers/Kconfig +++ b/bsp/swm320/drivers/Kconfig @@ -245,11 +245,11 @@ menu "On-chip Peripheral Drivers" select RT_USING_SPI if BSP_USING_SPI config BSP_USING_SPI0 - bool "Enable SPI0 BUS(CS/A12,MISO/A11,MOSI/A10,CLK/A9)" + bool "Enable SPI0 BUS(CS/P22,MISO/P19,MOSI/P18,CLK/P23)" default n config BSP_USING_SPI1 - bool "Enable SPI1 BUS(CS/C4,MISO/C5,MOSI/C6,CLK/C7)" + bool "Enable SPI1 BUS(CS/B6,MISO/B3,MOSI/B2,CLK/B1)" default n endif diff --git a/bsp/swm320/drivers/board.c b/bsp/swm320/drivers/board.c index 16675e7a3d..f42bd98986 100644 --- a/bsp/swm320/drivers/board.c +++ b/bsp/swm320/drivers/board.c @@ -17,6 +17,7 @@ static void bsp_clock_config(void) SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND); SysTick->CTRL |= 0x00000004UL; } + void SysTick_Handler(void) { /* enter interrupt */ @@ -28,6 +29,41 @@ void SysTick_Handler(void) rt_interrupt_leave(); } +/** + * This function will delay for some us. + * + * @param us the delay time of us + */ +void rt_hw_us_delay(rt_uint32_t us) +{ + rt_uint32_t ticks; + rt_uint32_t told, tnow, tcnt = 0; + rt_uint32_t reload = SysTick->LOAD; + + ticks = us * reload / (1000000 / RT_TICK_PER_SECOND); + told = SysTick->VAL; + while (1) + { + tnow = SysTick->VAL; + if (tnow != told) + { + if (tnow < told) + { + tcnt += told - tnow; + } + else + { + tcnt += reload - tnow + told; + } + told = tnow; + if (tcnt >= ticks) + { + break; + } + } + } +} + void rt_hw_board_init() { bsp_clock_config(); diff --git a/bsp/swm320/drivers/drv_crypto.c b/bsp/swm320/drivers/drv_crypto.c index 32d4ecd98a..5e97ff987e 100644 --- a/bsp/swm320/drivers/drv_crypto.c +++ b/bsp/swm320/drivers/drv_crypto.c @@ -21,11 +21,6 @@ struct swm_hwcrypto_device #ifdef BSP_USING_CRC -struct hash_ctx_des -{ - struct swm_crc_cfg contex; -}; - static struct hwcrypto_crc_cfg crc_backup_cfg; static rt_uint32_t _crc_update(struct hwcrypto_crc *ctx, const rt_uint8_t *in, rt_size_t length) @@ -108,6 +103,7 @@ static const struct hwcrypto_crc_ops crc_ops = { .update = _crc_update, }; +#endif /* BSP_USING_CRC */ static rt_err_t _crypto_create(struct rt_hwcrypto_ctx *ctx) { @@ -170,7 +166,7 @@ static rt_err_t _crypto_clone(struct rt_hwcrypto_ctx *des, const struct rt_hwcry case HWCRYPTO_TYPE_CRC: if (des->contex && src->contex) { - rt_memcpy(des->contex, src->contex, sizeof(struct hash_ctx_des)); + rt_memcpy(des->contex, src->contex, sizeof(struct swm_crc_cfg)); } break; #endif /* BSP_USING_CRC */ @@ -226,5 +222,5 @@ int rt_hw_crypto_init(void) } INIT_BOARD_EXPORT(rt_hw_crypto_init); -#endif /* BSP_USING_WDT */ -#endif /* RT_USING_WDT */ + +#endif /* RT_USING_HWCRYPTO */ diff --git a/bsp/swm320/drivers/drv_gpio.c b/bsp/swm320/drivers/drv_gpio.c index 482ffb5e7f..91f0e94f02 100644 --- a/bsp/swm320/drivers/drv_gpio.c +++ b/bsp/swm320/drivers/drv_gpio.c @@ -475,6 +475,7 @@ static void rt_hw_pin_isr(GPIO_TypeDef *GPIOx) } } } + void GPIOA_Handler(void) { rt_interrupt_enter(); diff --git a/bsp/swm320/drivers/drv_log.h b/bsp/swm320/drivers/drv_log.h index 71ee310d3a..52e560cc12 100644 --- a/bsp/swm320/drivers/drv_log.h +++ b/bsp/swm320/drivers/drv_log.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * diff --git a/bsp/swm320/drivers/drv_rtc.c b/bsp/swm320/drivers/drv_rtc.c index c8c80ed4ca..74d41a2752 100644 --- a/bsp/swm320/drivers/drv_rtc.c +++ b/bsp/swm320/drivers/drv_rtc.c @@ -10,6 +10,7 @@ */ #include "drv_rtc.h" +#include #ifdef RT_USING_RTC #ifdef BSP_USING_RTC @@ -18,8 +19,6 @@ #define LOG_TAG "drv.rtc" #include -static struct rt_device rtc_device; - static uint32_t calcWeekDay(uint32_t year, uint32_t month, uint32_t date) { uint32_t i, cnt = 0; @@ -55,8 +54,8 @@ static time_t swm_get_rtc_time_stamp(void) tm_new.tm_min = get_datetime.Minute; tm_new.tm_hour = get_datetime.Hour; tm_new.tm_mday = get_datetime.Date; - tm_new.tm_mon = get_datetime.Month - 1; - tm_new.tm_year = get_datetime.Year - 1900; + tm_new.tm_mon = get_datetime.Month; + tm_new.tm_year = get_datetime.Year; LOG_D("get rtc time."); return mktime(&tm_new); @@ -72,9 +71,9 @@ static rt_err_t swm_set_rtc_time_stamp(time_t time_stamp) set_datetime.Minute = p_tm->tm_min; set_datetime.Hour = p_tm->tm_hour; set_datetime.Date = p_tm->tm_mday; - set_datetime.Month = p_tm->tm_mon + 1; - set_datetime.Year = p_tm->tm_year + 1900; - // datetime.Day = p_tm->tm_wday; + set_datetime.Month = p_tm->tm_mon; + set_datetime.Year = p_tm->tm_year; + // set_datetime.Day = p_tm->tm_wday; RTC_Stop(RTC); while (RTC->CFGABLE == 0) @@ -86,7 +85,7 @@ static rt_err_t swm_set_rtc_time_stamp(time_t time_stamp) RTC->MONDAY = (calcWeekDay(set_datetime.Year, set_datetime.Month, set_datetime.Date) << RTC_MONDAY_DAY_Pos) | ((set_datetime.Month) << RTC_MONDAY_MON_Pos); - RTC->YEAR = set_datetime.Year - 1901; + RTC->YEAR = set_datetime.Year; RTC->LOAD = 1 << RTC_LOAD_TIME_Pos; RTC_Start(RTC); @@ -94,43 +93,7 @@ static rt_err_t swm_set_rtc_time_stamp(time_t time_stamp) return RT_EOK; } -static rt_err_t swm_rtc_control(rt_device_t rtc_device, int cmd, void *args) -{ - rt_err_t result = RT_EOK; - RT_ASSERT(rtc_device != RT_NULL); - - switch (cmd) - { - case RT_DEVICE_CTRL_RTC_GET_TIME: - *(rt_uint32_t *)args = swm_get_rtc_time_stamp(); - LOG_D("RTC: get rtc_time %x\n", *(rt_uint32_t *)args); - break; - case RT_DEVICE_CTRL_RTC_SET_TIME: - if (swm_set_rtc_time_stamp(*(rt_uint32_t *)args)) - { - result = -RT_ERROR; - } - LOG_D("RTC: set rtc_time %x\n", *(rt_uint32_t *)args); - break; - default: - break; - } - - return result; -} - -#ifdef RT_USING_DEVICE_OPS -const static struct rt_device_ops swm_rtc_ops = - { - RT_NULL, - RT_NULL, - RT_NULL, - RT_NULL, - RT_NULL, - swm_rtc_control}; -#endif - -static void swm_rtc_init(void) +static rt_err_t swm_rtc_init(void) { RTC_InitStructure rtc_initstruct; @@ -144,37 +107,50 @@ static void swm_rtc_init(void) rtc_initstruct.MinuteIEn = 0; RTC_Init(RTC, &rtc_initstruct); RTC_Start(RTC); + + return RT_EOK; } -static rt_err_t rt_hw_rtc_register(rt_device_t rtc_device, const char *name, rt_uint32_t flag) +static rt_err_t swm_rtc_get_secs(void *args) { - RT_ASSERT(rtc_device != RT_NULL); + *(rt_uint32_t *)args = swm_get_rtc_time_stamp(); + LOG_D("RTC: get rtc_time %x\n", *(rt_uint32_t *)args); - swm_rtc_init(); - -#ifdef RT_USING_DEVICE_OPS - rtc_device->ops = &swm_rtc_ops; -#else - rtc_device->init = RT_NULL; - rtc_device->open = RT_NULL; - rtc_device->close = RT_NULL; - rtc_device->read = RT_NULL; - rtc_device->write = RT_NULL; - rtc_device->control = swm_rtc_control; -#endif - rtc_device->type = RT_Device_Class_RTC; - rtc_device->rx_indicate = RT_NULL; - rtc_device->tx_complete = RT_NULL; - rtc_device->user_data = RT_NULL; - - /* register a character device */ - return rt_device_register(rtc_device, name, flag); + return RT_EOK; } +static rt_err_t swm_rtc_set_secs(void *args) +{ + rt_err_t result = RT_EOK; + + if (swm_set_rtc_time_stamp(*(rt_uint32_t *)args)) + { + result = -RT_ERROR; + } + LOG_D("RTC: set rtc_time %x\n", *(rt_uint32_t *)args); + + return result; +} + +static const struct rt_rtc_ops swm_rtc_ops = +{ + swm_rtc_init, + swm_rtc_get_secs, + swm_rtc_set_secs, + RT_NULL, + RT_NULL, + RT_NULL, + RT_NULL, +}; + +static rt_rtc_dev_t swm_rtc_device; + int rt_hw_rtc_init(void) { rt_err_t result; - result = rt_hw_rtc_register(&rtc_device, "rtc", RT_DEVICE_FLAG_RDWR); + + swm_rtc_device.ops = &swm_rtc_ops; + result = rt_hw_rtc_register(&swm_rtc_device, "rtc", RT_DEVICE_FLAG_RDWR,RT_NULL); if (result != RT_EOK) { LOG_E("rtc register err code: %d", result); diff --git a/bsp/swm320/drivers/drv_sdio.c b/bsp/swm320/drivers/drv_sdio.c index ee59594e60..bd5526008e 100644 --- a/bsp/swm320/drivers/drv_sdio.c +++ b/bsp/swm320/drivers/drv_sdio.c @@ -47,7 +47,7 @@ static void rthw_sdio_wait_completed(struct rthw_sdio *sdio) SDIO_TypeDef *hw_sdio = sdio->sdio_des.hw_sdio; if (rt_event_recv(&sdio->event, 0xffffffff, RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR, - rt_tick_from_millisecond(5000), &status) != RT_EOK) + rt_tick_from_millisecond(1000), &status) != RT_EOK) { LOG_E("wait completed timeout"); cmd->err = -RT_ETIMEOUT; diff --git a/bsp/swm320/drivers/drv_spi.c b/bsp/swm320/drivers/drv_spi.c index 36b16aa5c8..20ea69cb85 100644 --- a/bsp/swm320/drivers/drv_spi.c +++ b/bsp/swm320/drivers/drv_spi.c @@ -279,15 +279,15 @@ int rt_hw_spi_init(void) rt_err_t result; #ifdef BSP_USING_SPI0 - PORT_Init(PORTA, PIN9, FUNMUX1_SPI0_SCLK, 0); - PORT_Init(PORTA, PIN10, FUNMUX0_SPI0_MOSI, 0); - PORT_Init(PORTA, PIN11, FUNMUX1_SPI0_MISO, 1); + PORT_Init(PORTP, PIN23, FUNMUX1_SPI0_SCLK, 0); + PORT_Init(PORTP, PIN18, FUNMUX0_SPI0_MOSI, 0); + PORT_Init(PORTP, PIN19, FUNMUX1_SPI0_MISO, 1); #endif //BSP_USING_SPI0 #ifdef BSP_USING_SPI1 - PORT_Init(PORTC, PIN7, FUNMUX1_SPI1_SCLK, 0); - PORT_Init(PORTC, PIN6, FUNMUX0_SPI1_MOSI, 0); - PORT_Init(PORTC, PIN5, FUNMUX1_SPI1_MISO, 1); + PORT_Init(PORTB, PIN1, FUNMUX1_SPI1_SCLK, 0); + PORT_Init(PORTB, PIN2, FUNMUX0_SPI1_MOSI, 0); + PORT_Init(PORTB, PIN3, FUNMUX1_SPI1_MISO, 1); #endif //BSP_USING_SPI1 for (int i = 0; i < sizeof(spi_cfg) / sizeof(spi_cfg[0]); i++) { diff --git a/bsp/swm320/drivers/linker_scripts/link.lds b/bsp/swm320/drivers/linker_scripts/link.lds index 34fc394ae7..2f6896cfb3 100644 --- a/bsp/swm320/drivers/linker_scripts/link.lds +++ b/bsp/swm320/drivers/linker_scripts/link.lds @@ -1,71 +1,137 @@ -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Specify the memory areas */ +/* Program Entry, set to mark it as "used" and avoid gc */ MEMORY { - ROM (arx) : ORIGIN = 0x00000000, LENGTH = 0x00080000 /* 512k */ - RAM (arw) : ORIGIN = 0x20000000, LENGTH = 0x00020000 /* 128k */ + CODE (rx) : ORIGIN = 0x00000000, LENGTH = 512k /* 1024KB flash */ + DATA (rw) : ORIGIN = 0x20000000, LENGTH = 128k /* 128K sram */ } +ENTRY(Reset_Handler) +_system_stack_size = 0x200; -/* Define output sections */ SECTIONS { - . = ORIGIN(ROM); .text : { - KEEP(*(.isr_vector)) - - *(.text) - *(.text*) + . = ALIGN(4); + _stext = .; + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ *(.rodata*) - } > ROM + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t*) - . = ALIGN(4); - __data_load__ = LOADADDR(.data); + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + . = ALIGN(4); - . = ALIGN(4); - .data : - { - __data_start__ = .; - - *(.data) - *(.data*) + /* section information for initial. */ + . = ALIGN(4); + __rt_init_start = .; + KEEP(*(SORT(.rti_fn*))) + __rt_init_end = .; + . = ALIGN(4); . = ALIGN(4); - __data_end__ = .; - } > RAM AT> ROM + _etext = .; + } > CODE = 0 - . = ALIGN(4); + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > CODE + __exidx_end = .; + + /* .data section which is used for initialized data */ + + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >DATA + + .stack : + { + . = . + _system_stack_size; + . = ALIGN(4); + _estack = .; + } >DATA + + __bss_start = .; .bss : { - __bss_start__ = .; + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; *(.bss) - *(.bss*) + *(.bss.*) *(COMMON) . = ALIGN(4); - __bss_end__ = .; - } > RAM - . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + + *(.bss.init) + } > DATA + __bss_end = .; - .heap : - { - end = .; - __HeapBase = .; + _end = .; - *(.heap) - } > RAM - - /* .stack_dummy section doesn't contains any symbols. - * It is only used for linker to calculate size of stack sections */ - .stack_dummy : - { - *(.stack) - } > RAM - - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } } diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/arm_common_tables.h b/bsp/swm320/libraries/CMSIS/CoreSupport/arm_common_tables.h index 76aadca490..368705e1c2 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/arm_common_tables.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/arm_common_tables.h @@ -2,12 +2,12 @@ * Copyright (C) 2010-2014 ARM Limited. All rights reserved. * * $Date: 31. July 2014 -* $Revision: V1.4.4 +* $Revision: V1.4.4 * -* Project: CMSIS DSP Library -* Title: arm_common_tables.h +* Project: CMSIS DSP Library +* Title: arm_common_tables.h * -* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions +* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions * * Target Processor: Cortex-M4/Cortex-M3 * @@ -85,14 +85,13 @@ extern const float32_t twiddleCoef_rfft_1024[1024]; extern const float32_t twiddleCoef_rfft_2048[2048]; extern const float32_t twiddleCoef_rfft_4096[4096]; - /* floating-point bit reversal tables */ -#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 ) -#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 ) -#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 ) -#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 ) -#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 ) -#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 ) +#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20) +#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48) +#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56) +#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208) +#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440) +#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448) #define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800) #define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808) #define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032) @@ -108,13 +107,13 @@ extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENG extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH]; /* fixed-point bit reversal tables */ -#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 ) -#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 ) -#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 ) -#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 ) -#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 ) -#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 ) -#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 ) +#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12) +#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24) +#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56) +#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112) +#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240) +#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480) +#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992) #define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984) #define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032) diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/arm_const_structs.h b/bsp/swm320/libraries/CMSIS/CoreSupport/arm_const_structs.h index 217f1d50e2..2033c5e375 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/arm_const_structs.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/arm_const_structs.h @@ -2,12 +2,12 @@ * Copyright (C) 2010-2014 ARM Limited. All rights reserved. * * $Date: 31. July 2014 -* $Revision: V1.4.4 +* $Revision: V1.4.4 * -* Project: CMSIS DSP Library -* Title: arm_const_structs.h +* Project: CMSIS DSP Library +* Title: arm_const_structs.h * -* Description: This file has constant structs that are initialized for +* Description: This file has constant structs that are initialized for * user convenience. For example, some can be given as * arguments to the arm_cfft_f32() function. * @@ -46,34 +46,34 @@ #include "arm_math.h" #include "arm_common_tables.h" - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096; +extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16; +extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32; +extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64; +extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128; +extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256; +extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512; +extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024; +extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048; +extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096; +extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16; +extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32; +extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64; +extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128; +extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256; +extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512; +extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024; +extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048; +extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096; +extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16; +extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32; +extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64; +extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128; +extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256; +extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512; +extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024; +extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048; +extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096; #endif diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/arm_math.h b/bsp/swm320/libraries/CMSIS/CoreSupport/arm_math.h index f06a0713eb..5698fe08ab 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/arm_math.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/arm_math.h @@ -2,12 +2,12 @@ * Copyright (C) 2010-2014 ARM Limited. All rights reserved. * * $Date: 12. March 2014 -* $Revision: V1.4.4 +* $Revision: V1.4.4 * -* Project: CMSIS DSP Library -* Title: arm_math.h +* Project: CMSIS DSP Library +* Title: arm_math.h * -* Description: Public header file for CMSIS DSP Library +* Description: Public header file for CMSIS DSP Library * * Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0 * @@ -134,7 +134,7 @@ *
* CMSIS-DSP in ARM::CMSIS Pack * ----------------------------- - * + * * The following files relevant to CMSIS-DSP are present in the ARM::CMSIS Pack directories: * |File/Folder |Content | * |------------------------------|------------------------------------------------------------------------| @@ -142,7 +142,7 @@ * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) | * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions | * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library | - * + * *
* Revision History of CMSIS-DSP * ------------ @@ -154,7 +154,6 @@ * Copyright (C) 2010-2014 ARM Limited. All rights reserved. */ - /** * @defgroup groupMath Basic Math Functions */ @@ -281,122 +280,121 @@ #ifndef _ARM_MATH_H #define _ARM_MATH_H -#define __CMSIS_GENERIC /* disable NVIC and Systick functions */ +#define __CMSIS_GENERIC /* disable NVIC and Systick functions */ #if defined(ARM_MATH_CM7) - #include "core_cm7.h" -#elif defined (ARM_MATH_CM4) - #include "core_cm4.h" -#elif defined (ARM_MATH_CM3) - #include "core_cm3.h" -#elif defined (ARM_MATH_CM0) - #include "core_cm0.h" +#include "core_cm7.h" +#elif defined(ARM_MATH_CM4) +#include "core_cm4.h" +#elif defined(ARM_MATH_CM3) +#include "core_cm3.h" +#elif defined(ARM_MATH_CM0) +#include "core_cm0.h" #define ARM_MATH_CM0_FAMILY - #elif defined (ARM_MATH_CM0PLUS) +#elif defined(ARM_MATH_CM0PLUS) #include "core_cm0plus.h" - #define ARM_MATH_CM0_FAMILY +#define ARM_MATH_CM0_FAMILY #else - #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0" +#error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0" #endif -#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */ +#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */ #include "string.h" #include "math.h" -#ifdef __cplusplus +#ifdef __cplusplus extern "C" { #endif - - /** + /** * @brief Macros required for reciprocal calculation in Normalized LMS */ -#define DELTA_Q31 (0x100) -#define DELTA_Q15 0x5 -#define INDEX_MASK 0x0000003F +#define DELTA_Q31 (0x100) +#define DELTA_Q15 0x5 +#define INDEX_MASK 0x0000003F #ifndef PI -#define PI 3.14159265358979f +#define PI 3.14159265358979f #endif - /** + /** * @brief Macros required for SINE and COSINE Fast math approximations */ -#define FAST_MATH_TABLE_SIZE 512 -#define FAST_MATH_Q31_SHIFT (32 - 10) -#define FAST_MATH_Q15_SHIFT (16 - 10) -#define CONTROLLER_Q31_SHIFT (32 - 9) -#define TABLE_SIZE 256 -#define TABLE_SPACING_Q31 0x400000 -#define TABLE_SPACING_Q15 0x80 +#define FAST_MATH_TABLE_SIZE 512 +#define FAST_MATH_Q31_SHIFT (32 - 10) +#define FAST_MATH_Q15_SHIFT (16 - 10) +#define CONTROLLER_Q31_SHIFT (32 - 9) +#define TABLE_SIZE 256 +#define TABLE_SPACING_Q31 0x400000 +#define TABLE_SPACING_Q15 0x80 - /** + /** * @brief Macros required for SINE and COSINE Controller functions */ - /* 1.31(q31) Fixed value of 2/360 */ - /* -1 to +1 is divided into 360 values so total spacing is (2/360) */ -#define INPUT_SPACING 0xB60B61 + /* 1.31(q31) Fixed value of 2/360 */ + /* -1 to +1 is divided into 360 values so total spacing is (2/360) */ +#define INPUT_SPACING 0xB60B61 - /** + /** * @brief Macro for Unaligned Support */ #ifndef UNALIGNED_SUPPORT_DISABLE - #define ALIGN4 +#define ALIGN4 #else - #if defined (__GNUC__) - #define ALIGN4 __attribute__((aligned(4))) - #else - #define ALIGN4 __align(4) - #endif -#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */ +#if defined(__GNUC__) +#define ALIGN4 __attribute__((aligned(4))) +#else +#define ALIGN4 __align(4) +#endif +#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */ - /** + /** * @brief Error status returned by some functions in the library. */ - typedef enum - { - ARM_MATH_SUCCESS = 0, /**< No error */ - ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */ - ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */ - ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */ - ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */ - ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */ - ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */ - } arm_status; + typedef enum + { + ARM_MATH_SUCCESS = 0, /**< No error */ + ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */ + ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */ + ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */ + ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */ + ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */ + ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */ + } arm_status; - /** + /** * @brief 8-bit fractional data type in 1.7 format. */ - typedef int8_t q7_t; + typedef int8_t q7_t; - /** + /** * @brief 16-bit fractional data type in 1.15 format. */ - typedef int16_t q15_t; + typedef int16_t q15_t; - /** + /** * @brief 32-bit fractional data type in 1.31 format. */ - typedef int32_t q31_t; + typedef int32_t q31_t; - /** + /** * @brief 64-bit fractional data type in 1.63 format. */ - typedef int64_t q63_t; + typedef int64_t q63_t; - /** + /** * @brief 32-bit floating-point type definition. */ - typedef float float32_t; + typedef float float32_t; - /** + /** * @brief 64-bit floating-point type definition. */ - typedef double float64_t; + typedef double float64_t; - /** + /** * @brief definition to read/write two 16 bit values. */ #if defined __CC_ARM @@ -408,704 +406,681 @@ extern "C" #elif defined __GNUC__ #define __SIMD32_TYPE int32_t #define CMSIS_UNUSED __attribute__((unused)) -#elif defined __CSMC__ /* Cosmic */ +#elif defined __CSMC__ /* Cosmic */ #define CMSIS_UNUSED #define __SIMD32_TYPE int32_t #else #error Unknown compiler #endif -#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr)) -#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr)) +#define __SIMD32(addr) (*(__SIMD32_TYPE **)&(addr)) +#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr)) -#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr)) +#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *)(addr)) -#define __SIMD64(addr) (*(int64_t **) & (addr)) +#define __SIMD64(addr) (*(int64_t **)&(addr)) -#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) - /** +#if defined(ARM_MATH_CM3) || defined(ARM_MATH_CM0_FAMILY) + /** * @brief definition to pack two 16 bit values. */ -#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \ - (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) ) -#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \ - (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) ) +#define __PKHBT(ARG1, ARG2, ARG3) ((((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \ + (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000)) +#define __PKHTB(ARG1, ARG2, ARG3) ((((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \ + (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF)) #endif - - /** + /** * @brief definition to pack four 8 bit values. */ #ifndef ARM_MATH_BIG_ENDIAN -#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \ - (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \ - (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \ - (((int32_t)(v3) << 24) & (int32_t)0xFF000000) ) +#define __PACKq7(v0, v1, v2, v3) ((((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \ + (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \ + (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \ + (((int32_t)(v3) << 24) & (int32_t)0xFF000000)) #else -#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \ - (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \ - (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \ - (((int32_t)(v0) << 24) & (int32_t)0xFF000000) ) +#define __PACKq7(v0, v1, v2, v3) ((((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \ + (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \ + (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \ + (((int32_t)(v0) << 24) & (int32_t)0xFF000000)) #endif - - /** + /** * @brief Clips Q63 to Q31 values. */ - static __INLINE q31_t clip_q63_to_q31( - q63_t x) - { - return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? - ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x; - } + static __INLINE q31_t clip_q63_to_q31( + q63_t x) + { + return ((q31_t)(x >> 32) != ((q31_t)x >> 31)) ? ((0x7FFFFFFF ^ ((q31_t)(x >> 63)))) : (q31_t)x; + } - /** + /** * @brief Clips Q63 to Q15 values. */ - static __INLINE q15_t clip_q63_to_q15( - q63_t x) - { - return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? - ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15); - } + static __INLINE q15_t clip_q63_to_q15( + q63_t x) + { + return ((q31_t)(x >> 32) != ((q31_t)x >> 31)) ? ((0x7FFF ^ ((q15_t)(x >> 63)))) : (q15_t)(x >> 15); + } - /** + /** * @brief Clips Q31 to Q7 values. */ - static __INLINE q7_t clip_q31_to_q7( - q31_t x) - { - return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ? - ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x; - } + static __INLINE q7_t clip_q31_to_q7( + q31_t x) + { + return ((q31_t)(x >> 24) != ((q31_t)x >> 23)) ? ((0x7F ^ ((q7_t)(x >> 31)))) : (q7_t)x; + } - /** + /** * @brief Clips Q31 to Q15 values. */ - static __INLINE q15_t clip_q31_to_q15( - q31_t x) - { - return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ? - ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x; - } + static __INLINE q15_t clip_q31_to_q15( + q31_t x) + { + return ((q31_t)(x >> 16) != ((q31_t)x >> 15)) ? ((0x7FFF ^ ((q15_t)(x >> 31)))) : (q15_t)x; + } - /** + /** * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format. */ - static __INLINE q63_t mult32x64( - q63_t x, - q31_t y) - { - return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) + - (((q63_t) (x >> 32) * y))); - } + static __INLINE q63_t mult32x64( + q63_t x, + q31_t y) + { + return ((((q63_t)(x & 0x00000000FFFFFFFF) * y) >> 32) + + (((q63_t)(x >> 32) * y))); + } - -#if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM ) +#if defined(ARM_MATH_CM0_FAMILY) && defined(__CC_ARM) #define __CLZ __clz #endif -#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) ||(defined (__GNUC__)) || defined (__TASKING__) ) +#if defined(ARM_MATH_CM0_FAMILY) && ((defined(__ICCARM__)) || (defined(__GNUC__)) || defined(__TASKING__)) - static __INLINE uint32_t __CLZ( - q31_t data); + static __INLINE uint32_t __CLZ( + q31_t data); - - static __INLINE uint32_t __CLZ( - q31_t data) - { - uint32_t count = 0; - uint32_t mask = 0x80000000; - - while((data & mask) == 0) + static __INLINE uint32_t __CLZ( + q31_t data) { - count += 1u; - mask = mask >> 1u; + uint32_t count = 0; + uint32_t mask = 0x80000000; + + while ((data & mask) == 0) + { + count += 1u; + mask = mask >> 1u; + } + + return (count); } - return (count); - - } - #endif - /** + /** * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type. */ - static __INLINE uint32_t arm_recip_q31( - q31_t in, - q31_t * dst, - q31_t * pRecipTable) - { - - uint32_t out, tempVal; - uint32_t index, i; - uint32_t signBits; - - if(in > 0) + static __INLINE uint32_t arm_recip_q31( + q31_t in, + q31_t *dst, + q31_t *pRecipTable) { - signBits = __CLZ(in) - 1; - } - else - { - signBits = __CLZ(-in) - 1; + + uint32_t out, tempVal; + uint32_t index, i; + uint32_t signBits; + + if (in > 0) + { + signBits = __CLZ(in) - 1; + } + else + { + signBits = __CLZ(-in) - 1; + } + + /* Convert input sample to 1.31 format */ + in = in << signBits; + + /* calculation of index for initial approximated Val */ + index = (uint32_t)(in >> 24u); + index = (index & INDEX_MASK); + + /* 1.31 with exp 1 */ + out = pRecipTable[index]; + + /* calculation of reciprocal value */ + /* running approximation for two iterations */ + for (i = 0u; i < 2u; i++) + { + tempVal = (q31_t)(((q63_t)in * out) >> 31u); + tempVal = 0x7FFFFFFF - tempVal; + /* 1.31 with exp 1 */ + //out = (q31_t) (((q63_t) out * tempVal) >> 30u); + out = (q31_t)clip_q63_to_q31(((q63_t)out * tempVal) >> 30u); + } + + /* write output */ + *dst = out; + + /* return num of signbits of out = 1/in value */ + return (signBits + 1u); } - /* Convert input sample to 1.31 format */ - in = in << signBits; - - /* calculation of index for initial approximated Val */ - index = (uint32_t) (in >> 24u); - index = (index & INDEX_MASK); - - /* 1.31 with exp 1 */ - out = pRecipTable[index]; - - /* calculation of reciprocal value */ - /* running approximation for two iterations */ - for (i = 0u; i < 2u; i++) - { - tempVal = (q31_t) (((q63_t) in * out) >> 31u); - tempVal = 0x7FFFFFFF - tempVal; - /* 1.31 with exp 1 */ - //out = (q31_t) (((q63_t) out * tempVal) >> 30u); - out = (q31_t) clip_q63_to_q31(((q63_t) out * tempVal) >> 30u); - } - - /* write output */ - *dst = out; - - /* return num of signbits of out = 1/in value */ - return (signBits + 1u); - - } - - /** + /** * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type. */ - static __INLINE uint32_t arm_recip_q15( - q15_t in, - q15_t * dst, - q15_t * pRecipTable) - { - - uint32_t out = 0, tempVal = 0; - uint32_t index = 0, i = 0; - uint32_t signBits = 0; - - if(in > 0) + static __INLINE uint32_t arm_recip_q15( + q15_t in, + q15_t *dst, + q15_t *pRecipTable) { - signBits = __CLZ(in) - 17; - } - else - { - signBits = __CLZ(-in) - 17; + + uint32_t out = 0, tempVal = 0; + uint32_t index = 0, i = 0; + uint32_t signBits = 0; + + if (in > 0) + { + signBits = __CLZ(in) - 17; + } + else + { + signBits = __CLZ(-in) - 17; + } + + /* Convert input sample to 1.15 format */ + in = in << signBits; + + /* calculation of index for initial approximated Val */ + index = in >> 8; + index = (index & INDEX_MASK); + + /* 1.15 with exp 1 */ + out = pRecipTable[index]; + + /* calculation of reciprocal value */ + /* running approximation for two iterations */ + for (i = 0; i < 2; i++) + { + tempVal = (q15_t)(((q31_t)in * out) >> 15); + tempVal = 0x7FFF - tempVal; + /* 1.15 with exp 1 */ + out = (q15_t)(((q31_t)out * tempVal) >> 14); + } + + /* write output */ + *dst = out; + + /* return num of signbits of out = 1/in value */ + return (signBits + 1); } - /* Convert input sample to 1.15 format */ - in = in << signBits; - - /* calculation of index for initial approximated Val */ - index = in >> 8; - index = (index & INDEX_MASK); - - /* 1.15 with exp 1 */ - out = pRecipTable[index]; - - /* calculation of reciprocal value */ - /* running approximation for two iterations */ - for (i = 0; i < 2; i++) - { - tempVal = (q15_t) (((q31_t) in * out) >> 15); - tempVal = 0x7FFF - tempVal; - /* 1.15 with exp 1 */ - out = (q15_t) (((q31_t) out * tempVal) >> 14); - } - - /* write output */ - *dst = out; - - /* return num of signbits of out = 1/in value */ - return (signBits + 1); - - } - - - /* + /* * @brief C custom defined intrinisic function for only M0 processors */ #if defined(ARM_MATH_CM0_FAMILY) - static __INLINE q31_t __SSAT( - q31_t x, - uint32_t y) - { - int32_t posMax, negMin; - uint32_t i; - - posMax = 1; - for (i = 0; i < (y - 1); i++) + static __INLINE q31_t __SSAT( + q31_t x, + uint32_t y) { - posMax = posMax * 2; + int32_t posMax, negMin; + uint32_t i; + + posMax = 1; + for (i = 0; i < (y - 1); i++) + { + posMax = posMax * 2; + } + + if (x > 0) + { + posMax = (posMax - 1); + + if (x > posMax) + { + x = posMax; + } + } + else + { + negMin = -posMax; + + if (x < negMin) + { + x = negMin; + } + } + return (x); } - if(x > 0) - { - posMax = (posMax - 1); - - if(x > posMax) - { - x = posMax; - } - } - else - { - negMin = -posMax; - - if(x < negMin) - { - x = negMin; - } - } - return (x); - - - } - #endif /* end of ARM_MATH_CM0_FAMILY */ - - - /* + /* * @brief C custom defined intrinsic function for M3 and M0 processors */ -#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) +#if defined(ARM_MATH_CM3) || defined(ARM_MATH_CM0_FAMILY) - /* + /* * @brief C custom defined QADD8 for M3 and M0 processors */ - static __INLINE q31_t __QADD8( - q31_t x, - q31_t y) - { + static __INLINE q31_t __QADD8( + q31_t x, + q31_t y) + { - q31_t sum; - q7_t r, s, t, u; + q31_t sum; + q7_t r, s, t, u; - r = (q7_t) x; - s = (q7_t) y; + r = (q7_t)x; + s = (q7_t)y; - r = __SSAT((q31_t) (r + s), 8); - s = __SSAT(((q31_t) (((x << 16) >> 24) + ((y << 16) >> 24))), 8); - t = __SSAT(((q31_t) (((x << 8) >> 24) + ((y << 8) >> 24))), 8); - u = __SSAT(((q31_t) ((x >> 24) + (y >> 24))), 8); + r = __SSAT((q31_t)(r + s), 8); + s = __SSAT(((q31_t)(((x << 16) >> 24) + ((y << 16) >> 24))), 8); + t = __SSAT(((q31_t)(((x << 8) >> 24) + ((y << 8) >> 24))), 8); + u = __SSAT(((q31_t)((x >> 24) + (y >> 24))), 8); - sum = - (((q31_t) u << 24) & 0xFF000000) | (((q31_t) t << 16) & 0x00FF0000) | - (((q31_t) s << 8) & 0x0000FF00) | (r & 0x000000FF); + sum = + (((q31_t)u << 24) & 0xFF000000) | (((q31_t)t << 16) & 0x00FF0000) | + (((q31_t)s << 8) & 0x0000FF00) | (r & 0x000000FF); - return sum; + return sum; + } - } - - /* + /* * @brief C custom defined QSUB8 for M3 and M0 processors */ - static __INLINE q31_t __QSUB8( - q31_t x, - q31_t y) - { + static __INLINE q31_t __QSUB8( + q31_t x, + q31_t y) + { - q31_t sum; - q31_t r, s, t, u; + q31_t sum; + q31_t r, s, t, u; - r = (q7_t) x; - s = (q7_t) y; + r = (q7_t)x; + s = (q7_t)y; - r = __SSAT((r - s), 8); - s = __SSAT(((q31_t) (((x << 16) >> 24) - ((y << 16) >> 24))), 8) << 8; - t = __SSAT(((q31_t) (((x << 8) >> 24) - ((y << 8) >> 24))), 8) << 16; - u = __SSAT(((q31_t) ((x >> 24) - (y >> 24))), 8) << 24; + r = __SSAT((r - s), 8); + s = __SSAT(((q31_t)(((x << 16) >> 24) - ((y << 16) >> 24))), 8) << 8; + t = __SSAT(((q31_t)(((x << 8) >> 24) - ((y << 8) >> 24))), 8) << 16; + u = __SSAT(((q31_t)((x >> 24) - (y >> 24))), 8) << 24; - sum = - (u & 0xFF000000) | (t & 0x00FF0000) | (s & 0x0000FF00) | (r & - 0x000000FF); + sum = + (u & 0xFF000000) | (t & 0x00FF0000) | (s & 0x0000FF00) | (r & 0x000000FF); - return sum; - } + return sum; + } - /* + /* * @brief C custom defined QADD16 for M3 and M0 processors */ - /* + /* * @brief C custom defined QADD16 for M3 and M0 processors */ - static __INLINE q31_t __QADD16( - q31_t x, - q31_t y) - { + static __INLINE q31_t __QADD16( + q31_t x, + q31_t y) + { - q31_t sum; - q31_t r, s; + q31_t sum; + q31_t r, s; - r = (q15_t) x; - s = (q15_t) y; + r = (q15_t)x; + s = (q15_t)y; - r = __SSAT(r + s, 16); - s = __SSAT(((q31_t) ((x >> 16) + (y >> 16))), 16) << 16; + r = __SSAT(r + s, 16); + s = __SSAT(((q31_t)((x >> 16) + (y >> 16))), 16) << 16; - sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); - return sum; + return sum; + } - } - - /* + /* * @brief C custom defined SHADD16 for M3 and M0 processors */ - static __INLINE q31_t __SHADD16( - q31_t x, - q31_t y) - { + static __INLINE q31_t __SHADD16( + q31_t x, + q31_t y) + { - q31_t sum; - q31_t r, s; + q31_t sum; + q31_t r, s; - r = (q15_t) x; - s = (q15_t) y; + r = (q15_t)x; + s = (q15_t)y; - r = ((r >> 1) + (s >> 1)); - s = ((q31_t) ((x >> 17) + (y >> 17))) << 16; + r = ((r >> 1) + (s >> 1)); + s = ((q31_t)((x >> 17) + (y >> 17))) << 16; - sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); - return sum; + return sum; + } - } - - /* + /* * @brief C custom defined QSUB16 for M3 and M0 processors */ - static __INLINE q31_t __QSUB16( - q31_t x, - q31_t y) - { + static __INLINE q31_t __QSUB16( + q31_t x, + q31_t y) + { - q31_t sum; - q31_t r, s; + q31_t sum; + q31_t r, s; - r = (q15_t) x; - s = (q15_t) y; + r = (q15_t)x; + s = (q15_t)y; - r = __SSAT(r - s, 16); - s = __SSAT(((q31_t) ((x >> 16) - (y >> 16))), 16) << 16; + r = __SSAT(r - s, 16); + s = __SSAT(((q31_t)((x >> 16) - (y >> 16))), 16) << 16; - sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); - return sum; - } + return sum; + } - /* + /* * @brief C custom defined SHSUB16 for M3 and M0 processors */ - static __INLINE q31_t __SHSUB16( - q31_t x, - q31_t y) - { + static __INLINE q31_t __SHSUB16( + q31_t x, + q31_t y) + { - q31_t diff; - q31_t r, s; + q31_t diff; + q31_t r, s; - r = (q15_t) x; - s = (q15_t) y; + r = (q15_t)x; + s = (q15_t)y; - r = ((r >> 1) - (s >> 1)); - s = (((x >> 17) - (y >> 17)) << 16); + r = ((r >> 1) - (s >> 1)); + s = (((x >> 17) - (y >> 17)) << 16); - diff = (s & 0xFFFF0000) | (r & 0x0000FFFF); + diff = (s & 0xFFFF0000) | (r & 0x0000FFFF); - return diff; - } + return diff; + } - /* + /* * @brief C custom defined QASX for M3 and M0 processors */ - static __INLINE q31_t __QASX( - q31_t x, - q31_t y) - { + static __INLINE q31_t __QASX( + q31_t x, + q31_t y) + { - q31_t sum = 0; + q31_t sum = 0; - sum = - ((sum + - clip_q31_to_q15((q31_t) ((q15_t) (x >> 16) + (q15_t) y))) << 16) + - clip_q31_to_q15((q31_t) ((q15_t) x - (q15_t) (y >> 16))); + sum = + ((sum + + clip_q31_to_q15((q31_t)((q15_t)(x >> 16) + (q15_t)y))) + << 16) + + clip_q31_to_q15((q31_t)((q15_t)x - (q15_t)(y >> 16))); - return sum; - } + return sum; + } - /* + /* * @brief C custom defined SHASX for M3 and M0 processors */ - static __INLINE q31_t __SHASX( - q31_t x, - q31_t y) - { + static __INLINE q31_t __SHASX( + q31_t x, + q31_t y) + { - q31_t sum; - q31_t r, s; + q31_t sum; + q31_t r, s; - r = (q15_t) x; - s = (q15_t) y; + r = (q15_t)x; + s = (q15_t)y; - r = ((r >> 1) - (y >> 17)); - s = (((x >> 17) + (s >> 1)) << 16); + r = ((r >> 1) - (y >> 17)); + s = (((x >> 17) + (s >> 1)) << 16); - sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); - return sum; - } + return sum; + } - - /* + /* * @brief C custom defined QSAX for M3 and M0 processors */ - static __INLINE q31_t __QSAX( - q31_t x, - q31_t y) - { + static __INLINE q31_t __QSAX( + q31_t x, + q31_t y) + { - q31_t sum = 0; + q31_t sum = 0; - sum = - ((sum + - clip_q31_to_q15((q31_t) ((q15_t) (x >> 16) - (q15_t) y))) << 16) + - clip_q31_to_q15((q31_t) ((q15_t) x + (q15_t) (y >> 16))); + sum = + ((sum + + clip_q31_to_q15((q31_t)((q15_t)(x >> 16) - (q15_t)y))) + << 16) + + clip_q31_to_q15((q31_t)((q15_t)x + (q15_t)(y >> 16))); - return sum; - } + return sum; + } - /* + /* * @brief C custom defined SHSAX for M3 and M0 processors */ - static __INLINE q31_t __SHSAX( - q31_t x, - q31_t y) - { + static __INLINE q31_t __SHSAX( + q31_t x, + q31_t y) + { - q31_t sum; - q31_t r, s; + q31_t sum; + q31_t r, s; - r = (q15_t) x; - s = (q15_t) y; + r = (q15_t)x; + s = (q15_t)y; - r = ((r >> 1) + (y >> 17)); - s = (((x >> 17) - (s >> 1)) << 16); + r = ((r >> 1) + (y >> 17)); + s = (((x >> 17) - (s >> 1)) << 16); - sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); - return sum; - } + return sum; + } - /* + /* * @brief C custom defined SMUSDX for M3 and M0 processors */ - static __INLINE q31_t __SMUSDX( - q31_t x, - q31_t y) - { + static __INLINE q31_t __SMUSDX( + q31_t x, + q31_t y) + { - return ((q31_t) (((q15_t) x * (q15_t) (y >> 16)) - - ((q15_t) (x >> 16) * (q15_t) y))); - } + return ((q31_t)(((q15_t)x * (q15_t)(y >> 16)) - + ((q15_t)(x >> 16) * (q15_t)y))); + } - /* + /* * @brief C custom defined SMUADX for M3 and M0 processors */ - static __INLINE q31_t __SMUADX( - q31_t x, - q31_t y) - { + static __INLINE q31_t __SMUADX( + q31_t x, + q31_t y) + { - return ((q31_t) (((q15_t) x * (q15_t) (y >> 16)) + - ((q15_t) (x >> 16) * (q15_t) y))); - } + return ((q31_t)(((q15_t)x * (q15_t)(y >> 16)) + + ((q15_t)(x >> 16) * (q15_t)y))); + } - /* + /* * @brief C custom defined QADD for M3 and M0 processors */ - static __INLINE q31_t __QADD( - q31_t x, - q31_t y) - { - return clip_q63_to_q31((q63_t) x + y); - } + static __INLINE q31_t __QADD( + q31_t x, + q31_t y) + { + return clip_q63_to_q31((q63_t)x + y); + } - /* + /* * @brief C custom defined QSUB for M3 and M0 processors */ - static __INLINE q31_t __QSUB( - q31_t x, - q31_t y) - { - return clip_q63_to_q31((q63_t) x - y); - } + static __INLINE q31_t __QSUB( + q31_t x, + q31_t y) + { + return clip_q63_to_q31((q63_t)x - y); + } - /* + /* * @brief C custom defined SMLAD for M3 and M0 processors */ - static __INLINE q31_t __SMLAD( - q31_t x, - q31_t y, - q31_t sum) - { + static __INLINE q31_t __SMLAD( + q31_t x, + q31_t y, + q31_t sum) + { - return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + - ((q15_t) x * (q15_t) y)); - } + return (sum + ((q15_t)(x >> 16) * (q15_t)(y >> 16)) + + ((q15_t)x * (q15_t)y)); + } - /* + /* * @brief C custom defined SMLADX for M3 and M0 processors */ - static __INLINE q31_t __SMLADX( - q31_t x, - q31_t y, - q31_t sum) - { + static __INLINE q31_t __SMLADX( + q31_t x, + q31_t y, + q31_t sum) + { - return (sum + ((q15_t) (x >> 16) * (q15_t) (y)) + - ((q15_t) x * (q15_t) (y >> 16))); - } + return (sum + ((q15_t)(x >> 16) * (q15_t)(y)) + + ((q15_t)x * (q15_t)(y >> 16))); + } - /* + /* * @brief C custom defined SMLSDX for M3 and M0 processors */ - static __INLINE q31_t __SMLSDX( - q31_t x, - q31_t y, - q31_t sum) - { + static __INLINE q31_t __SMLSDX( + q31_t x, + q31_t y, + q31_t sum) + { - return (sum - ((q15_t) (x >> 16) * (q15_t) (y)) + - ((q15_t) x * (q15_t) (y >> 16))); - } + return (sum - ((q15_t)(x >> 16) * (q15_t)(y)) + + ((q15_t)x * (q15_t)(y >> 16))); + } - /* + /* * @brief C custom defined SMLALD for M3 and M0 processors */ - static __INLINE q63_t __SMLALD( - q31_t x, - q31_t y, - q63_t sum) - { + static __INLINE q63_t __SMLALD( + q31_t x, + q31_t y, + q63_t sum) + { - return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + - ((q15_t) x * (q15_t) y)); - } + return (sum + ((q15_t)(x >> 16) * (q15_t)(y >> 16)) + + ((q15_t)x * (q15_t)y)); + } - /* + /* * @brief C custom defined SMLALDX for M3 and M0 processors */ - static __INLINE q63_t __SMLALDX( - q31_t x, - q31_t y, - q63_t sum) - { + static __INLINE q63_t __SMLALDX( + q31_t x, + q31_t y, + q63_t sum) + { - return (sum + ((q15_t) (x >> 16) * (q15_t) y)) + - ((q15_t) x * (q15_t) (y >> 16)); - } + return (sum + ((q15_t)(x >> 16) * (q15_t)y)) + + ((q15_t)x * (q15_t)(y >> 16)); + } - /* + /* * @brief C custom defined SMUAD for M3 and M0 processors */ - static __INLINE q31_t __SMUAD( - q31_t x, - q31_t y) - { + static __INLINE q31_t __SMUAD( + q31_t x, + q31_t y) + { - return (((x >> 16) * (y >> 16)) + - (((x << 16) >> 16) * ((y << 16) >> 16))); - } + return (((x >> 16) * (y >> 16)) + + (((x << 16) >> 16) * ((y << 16) >> 16))); + } - /* + /* * @brief C custom defined SMUSD for M3 and M0 processors */ - static __INLINE q31_t __SMUSD( - q31_t x, - q31_t y) - { + static __INLINE q31_t __SMUSD( + q31_t x, + q31_t y) + { - return (-((x >> 16) * (y >> 16)) + - (((x << 16) >> 16) * ((y << 16) >> 16))); - } + return (-((x >> 16) * (y >> 16)) + + (((x << 16) >> 16) * ((y << 16) >> 16))); + } - - /* + /* * @brief C custom defined SXTB16 for M3 and M0 processors */ - static __INLINE q31_t __SXTB16( - q31_t x) - { - - return ((((x << 24) >> 24) & 0x0000FFFF) | - (((x << 8) >> 8) & 0xFFFF0000)); - } + static __INLINE q31_t __SXTB16( + q31_t x) + { + return ((((x << 24) >> 24) & 0x0000FFFF) | + (((x << 8) >> 8) & 0xFFFF0000)); + } #endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */ - - /** + /** * @brief Instance structure for the Q7 FIR filter. */ - typedef struct - { - uint16_t numTaps; /**< number of filter coefficients in the filter. */ - q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - } arm_fir_instance_q7; + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + } arm_fir_instance_q7; - /** + /** * @brief Instance structure for the Q15 FIR filter. */ - typedef struct - { - uint16_t numTaps; /**< number of filter coefficients in the filter. */ - q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - } arm_fir_instance_q15; + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + } arm_fir_instance_q15; - /** + /** * @brief Instance structure for the Q31 FIR filter. */ - typedef struct - { - uint16_t numTaps; /**< number of filter coefficients in the filter. */ - q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - } arm_fir_instance_q31; + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + } arm_fir_instance_q31; - /** + /** * @brief Instance structure for the floating-point FIR filter. */ - typedef struct - { - uint16_t numTaps; /**< number of filter coefficients in the filter. */ - float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - } arm_fir_instance_f32; + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + } arm_fir_instance_f32; - - /** + /** * @brief Processing function for the Q7 FIR filter. * @param[in] *S points to an instance of the Q7 FIR filter structure. * @param[in] *pSrc points to the block of input data. @@ -1113,14 +1088,13 @@ extern "C" * @param[in] blockSize number of samples to process. * @return none. */ - void arm_fir_q7( - const arm_fir_instance_q7 * S, - q7_t * pSrc, - q7_t * pDst, - uint32_t blockSize); + void arm_fir_q7( + const arm_fir_instance_q7 *S, + q7_t *pSrc, + q7_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Initialization function for the Q7 FIR filter. * @param[in,out] *S points to an instance of the Q7 FIR structure. * @param[in] numTaps Number of filter coefficients in the filter. @@ -1129,15 +1103,14 @@ extern "C" * @param[in] blockSize number of samples that are processed. * @return none */ - void arm_fir_init_q7( - arm_fir_instance_q7 * S, - uint16_t numTaps, - q7_t * pCoeffs, - q7_t * pState, - uint32_t blockSize); + void arm_fir_init_q7( + arm_fir_instance_q7 *S, + uint16_t numTaps, + q7_t *pCoeffs, + q7_t *pState, + uint32_t blockSize); - - /** + /** * @brief Processing function for the Q15 FIR filter. * @param[in] *S points to an instance of the Q15 FIR structure. * @param[in] *pSrc points to the block of input data. @@ -1145,13 +1118,13 @@ extern "C" * @param[in] blockSize number of samples to process. * @return none. */ - void arm_fir_q15( - const arm_fir_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_fir_q15( + const arm_fir_instance_q15 *S, + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4. * @param[in] *S points to an instance of the Q15 FIR filter structure. * @param[in] *pSrc points to the block of input data. @@ -1159,13 +1132,13 @@ extern "C" * @param[in] blockSize number of samples to process. * @return none. */ - void arm_fir_fast_q15( - const arm_fir_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_fir_fast_q15( + const arm_fir_instance_q15 *S, + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the Q15 FIR filter. * @param[in,out] *S points to an instance of the Q15 FIR filter structure. * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4. @@ -1176,14 +1149,14 @@ extern "C" * numTaps is not a supported value. */ - arm_status arm_fir_init_q15( - arm_fir_instance_q15 * S, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - uint32_t blockSize); + arm_status arm_fir_init_q15( + arm_fir_instance_q15 *S, + uint16_t numTaps, + q15_t *pCoeffs, + q15_t *pState, + uint32_t blockSize); - /** + /** * @brief Processing function for the Q31 FIR filter. * @param[in] *S points to an instance of the Q31 FIR filter structure. * @param[in] *pSrc points to the block of input data. @@ -1191,13 +1164,13 @@ extern "C" * @param[in] blockSize number of samples to process. * @return none. */ - void arm_fir_q31( - const arm_fir_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_fir_q31( + const arm_fir_instance_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4. * @param[in] *S points to an instance of the Q31 FIR structure. * @param[in] *pSrc points to the block of input data. @@ -1205,29 +1178,29 @@ extern "C" * @param[in] blockSize number of samples to process. * @return none. */ - void arm_fir_fast_q31( - const arm_fir_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_fir_fast_q31( + const arm_fir_instance_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the Q31 FIR filter. * @param[in,out] *S points to an instance of the Q31 FIR structure. - * @param[in] numTaps Number of filter coefficients in the filter. - * @param[in] *pCoeffs points to the filter coefficients. - * @param[in] *pState points to the state buffer. - * @param[in] blockSize number of samples that are processed at a time. - * @return none. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + * @return none. */ - void arm_fir_init_q31( - arm_fir_instance_q31 * S, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - uint32_t blockSize); + void arm_fir_init_q31( + arm_fir_instance_q31 *S, + uint16_t numTaps, + q31_t *pCoeffs, + q31_t *pState, + uint32_t blockSize); - /** + /** * @brief Processing function for the floating-point FIR filter. * @param[in] *S points to an instance of the floating-point FIR structure. * @param[in] *pSrc points to the block of input data. @@ -1235,69 +1208,64 @@ extern "C" * @param[in] blockSize number of samples to process. * @return none. */ - void arm_fir_f32( - const arm_fir_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_fir_f32( + const arm_fir_instance_f32 *S, + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the floating-point FIR filter. * @param[in,out] *S points to an instance of the floating-point FIR filter structure. - * @param[in] numTaps Number of filter coefficients in the filter. - * @param[in] *pCoeffs points to the filter coefficients. - * @param[in] *pState points to the state buffer. - * @param[in] blockSize number of samples that are processed at a time. - * @return none. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + * @return none. */ - void arm_fir_init_f32( - arm_fir_instance_f32 * S, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - uint32_t blockSize); + void arm_fir_init_f32( + arm_fir_instance_f32 *S, + uint16_t numTaps, + float32_t *pCoeffs, + float32_t *pState, + uint32_t blockSize); - - /** + /** * @brief Instance structure for the Q15 Biquad cascade filter. */ - typedef struct - { - int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ - q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ - int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ + typedef struct + { + int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ - } arm_biquad_casd_df1_inst_q15; + } arm_biquad_casd_df1_inst_q15; - - /** + /** * @brief Instance structure for the Q31 Biquad cascade filter. */ - typedef struct - { - uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ - q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ - uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ + typedef struct + { + uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ - } arm_biquad_casd_df1_inst_q31; + } arm_biquad_casd_df1_inst_q31; - /** + /** * @brief Instance structure for the floating-point Biquad cascade filter. */ - typedef struct - { - uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ - float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + typedef struct + { + uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_casd_df1_inst_f32; - } arm_biquad_casd_df1_inst_f32; - - - - /** + /** * @brief Processing function for the Q15 Biquad cascade filter. * @param[in] *S points to an instance of the Q15 Biquad cascade structure. * @param[in] *pSrc points to the block of input data. @@ -1306,13 +1274,13 @@ extern "C" * @return none. */ - void arm_biquad_cascade_df1_q15( - const arm_biquad_casd_df1_inst_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_biquad_cascade_df1_q15( + const arm_biquad_casd_df1_inst_q15 *S, + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the Q15 Biquad cascade filter. * @param[in,out] *S points to an instance of the Q15 Biquad cascade structure. * @param[in] numStages number of 2nd order stages in the filter. @@ -1322,15 +1290,14 @@ extern "C" * @return none */ - void arm_biquad_cascade_df1_init_q15( - arm_biquad_casd_df1_inst_q15 * S, - uint8_t numStages, - q15_t * pCoeffs, - q15_t * pState, - int8_t postShift); + void arm_biquad_cascade_df1_init_q15( + arm_biquad_casd_df1_inst_q15 *S, + uint8_t numStages, + q15_t *pCoeffs, + q15_t *pState, + int8_t postShift); - - /** + /** * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4. * @param[in] *S points to an instance of the Q15 Biquad cascade structure. * @param[in] *pSrc points to the block of input data. @@ -1339,14 +1306,13 @@ extern "C" * @return none. */ - void arm_biquad_cascade_df1_fast_q15( - const arm_biquad_casd_df1_inst_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_biquad_cascade_df1_fast_q15( + const arm_biquad_casd_df1_inst_q15 *S, + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Processing function for the Q31 Biquad cascade filter * @param[in] *S points to an instance of the Q31 Biquad cascade structure. * @param[in] *pSrc points to the block of input data. @@ -1355,13 +1321,13 @@ extern "C" * @return none. */ - void arm_biquad_cascade_df1_q31( - const arm_biquad_casd_df1_inst_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_biquad_cascade_df1_q31( + const arm_biquad_casd_df1_inst_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4. * @param[in] *S points to an instance of the Q31 Biquad cascade structure. * @param[in] *pSrc points to the block of input data. @@ -1370,13 +1336,13 @@ extern "C" * @return none. */ - void arm_biquad_cascade_df1_fast_q31( - const arm_biquad_casd_df1_inst_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_biquad_cascade_df1_fast_q31( + const arm_biquad_casd_df1_inst_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the Q31 Biquad cascade filter. * @param[in,out] *S points to an instance of the Q31 Biquad cascade structure. * @param[in] numStages number of 2nd order stages in the filter. @@ -1386,14 +1352,14 @@ extern "C" * @return none */ - void arm_biquad_cascade_df1_init_q31( - arm_biquad_casd_df1_inst_q31 * S, - uint8_t numStages, - q31_t * pCoeffs, - q31_t * pState, - int8_t postShift); + void arm_biquad_cascade_df1_init_q31( + arm_biquad_casd_df1_inst_q31 *S, + uint8_t numStages, + q31_t *pCoeffs, + q31_t *pState, + int8_t postShift); - /** + /** * @brief Processing function for the floating-point Biquad cascade filter. * @param[in] *S points to an instance of the floating-point Biquad cascade structure. * @param[in] *pSrc points to the block of input data. @@ -1402,13 +1368,13 @@ extern "C" * @return none. */ - void arm_biquad_cascade_df1_f32( - const arm_biquad_casd_df1_inst_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_biquad_cascade_df1_f32( + const arm_biquad_casd_df1_inst_f32 *S, + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the floating-point Biquad cascade filter. * @param[in,out] *S points to an instance of the floating-point Biquad cascade structure. * @param[in] numStages number of 2nd order stages in the filter. @@ -1417,63 +1383,59 @@ extern "C" * @return none */ - void arm_biquad_cascade_df1_init_f32( - arm_biquad_casd_df1_inst_f32 * S, - uint8_t numStages, - float32_t * pCoeffs, - float32_t * pState); + void arm_biquad_cascade_df1_init_f32( + arm_biquad_casd_df1_inst_f32 *S, + uint8_t numStages, + float32_t *pCoeffs, + float32_t *pState); - - /** + /** * @brief Instance structure for the floating-point matrix structure. */ - typedef struct - { - uint16_t numRows; /**< number of rows of the matrix. */ - uint16_t numCols; /**< number of columns of the matrix. */ - float32_t *pData; /**< points to the data of the matrix. */ - } arm_matrix_instance_f32; + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + float32_t *pData; /**< points to the data of the matrix. */ + } arm_matrix_instance_f32; - - /** + /** * @brief Instance structure for the floating-point matrix structure. */ - typedef struct - { - uint16_t numRows; /**< number of rows of the matrix. */ - uint16_t numCols; /**< number of columns of the matrix. */ - float64_t *pData; /**< points to the data of the matrix. */ - } arm_matrix_instance_f64; + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + float64_t *pData; /**< points to the data of the matrix. */ + } arm_matrix_instance_f64; - /** + /** * @brief Instance structure for the Q15 matrix structure. */ - typedef struct - { - uint16_t numRows; /**< number of rows of the matrix. */ - uint16_t numCols; /**< number of columns of the matrix. */ - q15_t *pData; /**< points to the data of the matrix. */ + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + q15_t *pData; /**< points to the data of the matrix. */ - } arm_matrix_instance_q15; + } arm_matrix_instance_q15; - /** + /** * @brief Instance structure for the Q31 matrix structure. */ - typedef struct - { - uint16_t numRows; /**< number of rows of the matrix. */ - uint16_t numCols; /**< number of columns of the matrix. */ - q31_t *pData; /**< points to the data of the matrix. */ + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + q31_t *pData; /**< points to the data of the matrix. */ - } arm_matrix_instance_q31; + } arm_matrix_instance_q31; - - - /** + /** * @brief Floating-point matrix addition. * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1482,12 +1444,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_add_f32( - const arm_matrix_instance_f32 * pSrcA, - const arm_matrix_instance_f32 * pSrcB, - arm_matrix_instance_f32 * pDst); + arm_status arm_mat_add_f32( + const arm_matrix_instance_f32 *pSrcA, + const arm_matrix_instance_f32 *pSrcB, + arm_matrix_instance_f32 *pDst); - /** + /** * @brief Q15 matrix addition. * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1496,12 +1458,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_add_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst); + arm_status arm_mat_add_q15( + const arm_matrix_instance_q15 *pSrcA, + const arm_matrix_instance_q15 *pSrcB, + arm_matrix_instance_q15 *pDst); - /** + /** * @brief Q31 matrix addition. * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1510,12 +1472,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_add_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); + arm_status arm_mat_add_q31( + const arm_matrix_instance_q31 *pSrcA, + const arm_matrix_instance_q31 *pSrcB, + arm_matrix_instance_q31 *pDst); - /** + /** * @brief Floating-point, complex, matrix multiplication. * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1524,12 +1486,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_cmplx_mult_f32( - const arm_matrix_instance_f32 * pSrcA, - const arm_matrix_instance_f32 * pSrcB, - arm_matrix_instance_f32 * pDst); + arm_status arm_mat_cmplx_mult_f32( + const arm_matrix_instance_f32 *pSrcA, + const arm_matrix_instance_f32 *pSrcB, + arm_matrix_instance_f32 *pDst); - /** + /** * @brief Q15, complex, matrix multiplication. * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1538,13 +1500,13 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_cmplx_mult_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst, - q15_t * pScratch); + arm_status arm_mat_cmplx_mult_q15( + const arm_matrix_instance_q15 *pSrcA, + const arm_matrix_instance_q15 *pSrcB, + arm_matrix_instance_q15 *pDst, + q15_t *pScratch); - /** + /** * @brief Q31, complex, matrix multiplication. * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1553,51 +1515,48 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_cmplx_mult_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); + arm_status arm_mat_cmplx_mult_q31( + const arm_matrix_instance_q31 *pSrcA, + const arm_matrix_instance_q31 *pSrcB, + arm_matrix_instance_q31 *pDst); - - /** + /** * @brief Floating-point matrix transpose. * @param[in] *pSrc points to the input matrix * @param[out] *pDst points to the output matrix - * @return The function returns either ARM_MATH_SIZE_MISMATCH + * @return The function returns either ARM_MATH_SIZE_MISMATCH * or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_trans_f32( - const arm_matrix_instance_f32 * pSrc, - arm_matrix_instance_f32 * pDst); + arm_status arm_mat_trans_f32( + const arm_matrix_instance_f32 *pSrc, + arm_matrix_instance_f32 *pDst); - - /** + /** * @brief Q15 matrix transpose. * @param[in] *pSrc points to the input matrix * @param[out] *pDst points to the output matrix - * @return The function returns either ARM_MATH_SIZE_MISMATCH + * @return The function returns either ARM_MATH_SIZE_MISMATCH * or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_trans_q15( - const arm_matrix_instance_q15 * pSrc, - arm_matrix_instance_q15 * pDst); + arm_status arm_mat_trans_q15( + const arm_matrix_instance_q15 *pSrc, + arm_matrix_instance_q15 *pDst); - /** + /** * @brief Q31 matrix transpose. * @param[in] *pSrc points to the input matrix * @param[out] *pDst points to the output matrix - * @return The function returns either ARM_MATH_SIZE_MISMATCH + * @return The function returns either ARM_MATH_SIZE_MISMATCH * or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_trans_q31( - const arm_matrix_instance_q31 * pSrc, - arm_matrix_instance_q31 * pDst); + arm_status arm_mat_trans_q31( + const arm_matrix_instance_q31 *pSrc, + arm_matrix_instance_q31 *pDst); - - /** + /** * @brief Floating-point matrix multiplication * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1606,44 +1565,44 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_mult_f32( - const arm_matrix_instance_f32 * pSrcA, - const arm_matrix_instance_f32 * pSrcB, - arm_matrix_instance_f32 * pDst); + arm_status arm_mat_mult_f32( + const arm_matrix_instance_f32 *pSrcA, + const arm_matrix_instance_f32 *pSrcB, + arm_matrix_instance_f32 *pDst); - /** + /** * @brief Q15 matrix multiplication * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure * @param[out] *pDst points to output matrix structure - * @param[in] *pState points to the array for storing intermediate results + * @param[in] *pState points to the array for storing intermediate results * @return The function returns either * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_mult_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst, - q15_t * pState); + arm_status arm_mat_mult_q15( + const arm_matrix_instance_q15 *pSrcA, + const arm_matrix_instance_q15 *pSrcB, + arm_matrix_instance_q15 *pDst, + q15_t *pState); - /** + /** * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure * @param[out] *pDst points to output matrix structure - * @param[in] *pState points to the array for storing intermediate results + * @param[in] *pState points to the array for storing intermediate results * @return The function returns either * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_mult_fast_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst, - q15_t * pState); + arm_status arm_mat_mult_fast_q15( + const arm_matrix_instance_q15 *pSrcA, + const arm_matrix_instance_q15 *pSrcB, + arm_matrix_instance_q15 *pDst, + q15_t *pState); - /** + /** * @brief Q31 matrix multiplication * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1652,12 +1611,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_mult_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); + arm_status arm_mat_mult_q31( + const arm_matrix_instance_q31 *pSrcA, + const arm_matrix_instance_q31 *pSrcB, + arm_matrix_instance_q31 *pDst); - /** + /** * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1666,13 +1625,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_mult_fast_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); + arm_status arm_mat_mult_fast_q31( + const arm_matrix_instance_q31 *pSrcA, + const arm_matrix_instance_q31 *pSrcB, + arm_matrix_instance_q31 *pDst); - - /** + /** * @brief Floating-point matrix subtraction * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1681,12 +1639,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_sub_f32( - const arm_matrix_instance_f32 * pSrcA, - const arm_matrix_instance_f32 * pSrcB, - arm_matrix_instance_f32 * pDst); + arm_status arm_mat_sub_f32( + const arm_matrix_instance_f32 *pSrcA, + const arm_matrix_instance_f32 *pSrcB, + arm_matrix_instance_f32 *pDst); - /** + /** * @brief Q15 matrix subtraction * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1695,12 +1653,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_sub_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst); + arm_status arm_mat_sub_q15( + const arm_matrix_instance_q15 *pSrcA, + const arm_matrix_instance_q15 *pSrcB, + arm_matrix_instance_q15 *pDst); - /** + /** * @brief Q31 matrix subtraction * @param[in] *pSrcA points to the first input matrix structure * @param[in] *pSrcB points to the second input matrix structure @@ -1709,12 +1667,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_sub_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); + arm_status arm_mat_sub_q31( + const arm_matrix_instance_q31 *pSrcA, + const arm_matrix_instance_q31 *pSrcB, + arm_matrix_instance_q31 *pDst); - /** + /** * @brief Floating-point matrix scaling. * @param[in] *pSrc points to the input matrix * @param[in] scale scale factor @@ -1723,12 +1681,12 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_scale_f32( - const arm_matrix_instance_f32 * pSrc, - float32_t scale, - arm_matrix_instance_f32 * pDst); + arm_status arm_mat_scale_f32( + const arm_matrix_instance_f32 *pSrc, + float32_t scale, + arm_matrix_instance_f32 *pDst); - /** + /** * @brief Q15 matrix scaling. * @param[in] *pSrc points to input matrix * @param[in] scaleFract fractional portion of the scale factor @@ -1738,13 +1696,13 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_scale_q15( - const arm_matrix_instance_q15 * pSrc, - q15_t scaleFract, - int32_t shift, - arm_matrix_instance_q15 * pDst); + arm_status arm_mat_scale_q15( + const arm_matrix_instance_q15 *pSrc, + q15_t scaleFract, + int32_t shift, + arm_matrix_instance_q15 *pDst); - /** + /** * @brief Q31 matrix scaling. * @param[in] *pSrc points to input matrix * @param[in] scaleFract fractional portion of the scale factor @@ -1754,224 +1712,215 @@ extern "C" * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. */ - arm_status arm_mat_scale_q31( - const arm_matrix_instance_q31 * pSrc, - q31_t scaleFract, - int32_t shift, - arm_matrix_instance_q31 * pDst); + arm_status arm_mat_scale_q31( + const arm_matrix_instance_q31 *pSrc, + q31_t scaleFract, + int32_t shift, + arm_matrix_instance_q31 *pDst); - - /** + /** * @brief Q31 matrix initialization. * @param[in,out] *S points to an instance of the floating-point matrix structure. * @param[in] nRows number of rows in the matrix. * @param[in] nColumns number of columns in the matrix. - * @param[in] *pData points to the matrix data array. + * @param[in] *pData points to the matrix data array. * @return none */ - void arm_mat_init_q31( - arm_matrix_instance_q31 * S, - uint16_t nRows, - uint16_t nColumns, - q31_t * pData); + void arm_mat_init_q31( + arm_matrix_instance_q31 *S, + uint16_t nRows, + uint16_t nColumns, + q31_t *pData); - /** + /** * @brief Q15 matrix initialization. * @param[in,out] *S points to an instance of the floating-point matrix structure. * @param[in] nRows number of rows in the matrix. * @param[in] nColumns number of columns in the matrix. - * @param[in] *pData points to the matrix data array. + * @param[in] *pData points to the matrix data array. * @return none */ - void arm_mat_init_q15( - arm_matrix_instance_q15 * S, - uint16_t nRows, - uint16_t nColumns, - q15_t * pData); + void arm_mat_init_q15( + arm_matrix_instance_q15 *S, + uint16_t nRows, + uint16_t nColumns, + q15_t *pData); - /** + /** * @brief Floating-point matrix initialization. * @param[in,out] *S points to an instance of the floating-point matrix structure. * @param[in] nRows number of rows in the matrix. * @param[in] nColumns number of columns in the matrix. - * @param[in] *pData points to the matrix data array. + * @param[in] *pData points to the matrix data array. * @return none */ - void arm_mat_init_f32( - arm_matrix_instance_f32 * S, - uint16_t nRows, - uint16_t nColumns, - float32_t * pData); + void arm_mat_init_f32( + arm_matrix_instance_f32 *S, + uint16_t nRows, + uint16_t nColumns, + float32_t *pData); - - - /** + /** * @brief Instance structure for the Q15 PID Control. */ - typedef struct - { - q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + typedef struct + { + q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ #ifdef ARM_MATH_CM0_FAMILY - q15_t A1; - q15_t A2; + q15_t A1; + q15_t A2; #else - q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/ + q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/ #endif - q15_t state[3]; /**< The state array of length 3. */ - q15_t Kp; /**< The proportional gain. */ - q15_t Ki; /**< The integral gain. */ - q15_t Kd; /**< The derivative gain. */ - } arm_pid_instance_q15; + q15_t state[3]; /**< The state array of length 3. */ + q15_t Kp; /**< The proportional gain. */ + q15_t Ki; /**< The integral gain. */ + q15_t Kd; /**< The derivative gain. */ + } arm_pid_instance_q15; - /** + /** * @brief Instance structure for the Q31 PID Control. */ - typedef struct - { - q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ - q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ - q31_t A2; /**< The derived gain, A2 = Kd . */ - q31_t state[3]; /**< The state array of length 3. */ - q31_t Kp; /**< The proportional gain. */ - q31_t Ki; /**< The integral gain. */ - q31_t Kd; /**< The derivative gain. */ + typedef struct + { + q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ + q31_t A2; /**< The derived gain, A2 = Kd . */ + q31_t state[3]; /**< The state array of length 3. */ + q31_t Kp; /**< The proportional gain. */ + q31_t Ki; /**< The integral gain. */ + q31_t Kd; /**< The derivative gain. */ - } arm_pid_instance_q31; + } arm_pid_instance_q31; - /** + /** * @brief Instance structure for the floating-point PID Control. */ - typedef struct - { - float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ - float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ - float32_t A2; /**< The derived gain, A2 = Kd . */ - float32_t state[3]; /**< The state array of length 3. */ - float32_t Kp; /**< The proportional gain. */ - float32_t Ki; /**< The integral gain. */ - float32_t Kd; /**< The derivative gain. */ - } arm_pid_instance_f32; + typedef struct + { + float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ + float32_t A2; /**< The derived gain, A2 = Kd . */ + float32_t state[3]; /**< The state array of length 3. */ + float32_t Kp; /**< The proportional gain. */ + float32_t Ki; /**< The integral gain. */ + float32_t Kd; /**< The derivative gain. */ + } arm_pid_instance_f32; - - - /** + /** * @brief Initialization function for the floating-point PID Control. * @param[in,out] *S points to an instance of the PID structure. * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. * @return none. */ - void arm_pid_init_f32( - arm_pid_instance_f32 * S, - int32_t resetStateFlag); + void arm_pid_init_f32( + arm_pid_instance_f32 *S, + int32_t resetStateFlag); - /** + /** * @brief Reset function for the floating-point PID Control. * @param[in,out] *S is an instance of the floating-point PID Control structure * @return none */ - void arm_pid_reset_f32( - arm_pid_instance_f32 * S); + void arm_pid_reset_f32( + arm_pid_instance_f32 *S); - - /** + /** * @brief Initialization function for the Q31 PID Control. * @param[in,out] *S points to an instance of the Q15 PID structure. * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. * @return none. */ - void arm_pid_init_q31( - arm_pid_instance_q31 * S, - int32_t resetStateFlag); + void arm_pid_init_q31( + arm_pid_instance_q31 *S, + int32_t resetStateFlag); - - /** + /** * @brief Reset function for the Q31 PID Control. * @param[in,out] *S points to an instance of the Q31 PID Control structure * @return none */ - void arm_pid_reset_q31( - arm_pid_instance_q31 * S); + void arm_pid_reset_q31( + arm_pid_instance_q31 *S); - /** + /** * @brief Initialization function for the Q15 PID Control. * @param[in,out] *S points to an instance of the Q15 PID structure. * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. * @return none. */ - void arm_pid_init_q15( - arm_pid_instance_q15 * S, - int32_t resetStateFlag); + void arm_pid_init_q15( + arm_pid_instance_q15 *S, + int32_t resetStateFlag); - /** + /** * @brief Reset function for the Q15 PID Control. * @param[in,out] *S points to an instance of the q15 PID Control structure * @return none */ - void arm_pid_reset_q15( - arm_pid_instance_q15 * S); + void arm_pid_reset_q15( + arm_pid_instance_q15 *S); - - /** + /** * @brief Instance structure for the floating-point Linear Interpolate function. */ - typedef struct - { - uint32_t nValues; /**< nValues */ - float32_t x1; /**< x1 */ - float32_t xSpacing; /**< xSpacing */ - float32_t *pYData; /**< pointer to the table of Y values */ - } arm_linear_interp_instance_f32; + typedef struct + { + uint32_t nValues; /**< nValues */ + float32_t x1; /**< x1 */ + float32_t xSpacing; /**< xSpacing */ + float32_t *pYData; /**< pointer to the table of Y values */ + } arm_linear_interp_instance_f32; - /** + /** * @brief Instance structure for the floating-point bilinear interpolation function. */ - typedef struct - { - uint16_t numRows; /**< number of rows in the data table. */ - uint16_t numCols; /**< number of columns in the data table. */ - float32_t *pData; /**< points to the data table. */ - } arm_bilinear_interp_instance_f32; + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + float32_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_f32; - /** + /** * @brief Instance structure for the Q31 bilinear interpolation function. */ - typedef struct - { - uint16_t numRows; /**< number of rows in the data table. */ - uint16_t numCols; /**< number of columns in the data table. */ - q31_t *pData; /**< points to the data table. */ - } arm_bilinear_interp_instance_q31; + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q31_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q31; - /** + /** * @brief Instance structure for the Q15 bilinear interpolation function. */ - typedef struct - { - uint16_t numRows; /**< number of rows in the data table. */ - uint16_t numCols; /**< number of columns in the data table. */ - q15_t *pData; /**< points to the data table. */ - } arm_bilinear_interp_instance_q15; + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q15_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q15; - /** + /** * @brief Instance structure for the Q15 bilinear interpolation function. */ - typedef struct - { - uint16_t numRows; /**< number of rows in the data table. */ - uint16_t numCols; /**< number of columns in the data table. */ - q7_t *pData; /**< points to the data table. */ - } arm_bilinear_interp_instance_q7; + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q7_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q7; - - /** + /** * @brief Q7 vector multiplication. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -1980,13 +1929,13 @@ extern "C" * @return none. */ - void arm_mult_q7( - q7_t * pSrcA, - q7_t * pSrcB, - q7_t * pDst, - uint32_t blockSize); + void arm_mult_q7( + q7_t *pSrcA, + q7_t *pSrcB, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q15 vector multiplication. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -1995,13 +1944,13 @@ extern "C" * @return none. */ - void arm_mult_q15( - q15_t * pSrcA, - q15_t * pSrcB, - q15_t * pDst, - uint32_t blockSize); + void arm_mult_q15( + q15_t *pSrcA, + q15_t *pSrcB, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q31 vector multiplication. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2010,13 +1959,13 @@ extern "C" * @return none. */ - void arm_mult_q31( - q31_t * pSrcA, - q31_t * pSrcB, - q31_t * pDst, - uint32_t blockSize); + void arm_mult_q31( + q31_t *pSrcA, + q31_t *pSrcB, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Floating-point vector multiplication. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2025,353 +1974,346 @@ extern "C" * @return none. */ - void arm_mult_f32( - float32_t * pSrcA, - float32_t * pSrcB, - float32_t * pDst, - uint32_t blockSize); + void arm_mult_f32( + float32_t *pSrcA, + float32_t *pSrcB, + float32_t *pDst, + uint32_t blockSize); - - - - - - /** + /** * @brief Instance structure for the Q15 CFFT/CIFFT function. */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - } arm_cfft_radix2_instance_q15; + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix2_instance_q15; -/* Deprecated */ - arm_status arm_cfft_radix2_init_q15( - arm_cfft_radix2_instance_q15 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); + /* Deprecated */ + arm_status arm_cfft_radix2_init_q15( + arm_cfft_radix2_instance_q15 *S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); -/* Deprecated */ - void arm_cfft_radix2_q15( - const arm_cfft_radix2_instance_q15 * S, - q15_t * pSrc); + /* Deprecated */ + void arm_cfft_radix2_q15( + const arm_cfft_radix2_instance_q15 *S, + q15_t *pSrc); - - - /** + /** * @brief Instance structure for the Q15 CFFT/CIFFT function. */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - q15_t *pTwiddle; /**< points to the twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - } arm_cfft_radix4_instance_q15; + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q15_t *pTwiddle; /**< points to the twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix4_instance_q15; -/* Deprecated */ - arm_status arm_cfft_radix4_init_q15( - arm_cfft_radix4_instance_q15 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); + /* Deprecated */ + arm_status arm_cfft_radix4_init_q15( + arm_cfft_radix4_instance_q15 *S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); -/* Deprecated */ - void arm_cfft_radix4_q15( - const arm_cfft_radix4_instance_q15 * S, - q15_t * pSrc); + /* Deprecated */ + void arm_cfft_radix4_q15( + const arm_cfft_radix4_instance_q15 *S, + q15_t *pSrc); - /** + /** * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function. */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - q31_t *pTwiddle; /**< points to the Twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - } arm_cfft_radix2_instance_q31; + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q31_t *pTwiddle; /**< points to the Twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix2_instance_q31; -/* Deprecated */ - arm_status arm_cfft_radix2_init_q31( - arm_cfft_radix2_instance_q31 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); + /* Deprecated */ + arm_status arm_cfft_radix2_init_q31( + arm_cfft_radix2_instance_q31 *S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); -/* Deprecated */ - void arm_cfft_radix2_q31( - const arm_cfft_radix2_instance_q31 * S, - q31_t * pSrc); + /* Deprecated */ + void arm_cfft_radix2_q31( + const arm_cfft_radix2_instance_q31 *S, + q31_t *pSrc); - /** + /** * @brief Instance structure for the Q31 CFFT/CIFFT function. */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - q31_t *pTwiddle; /**< points to the twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - } arm_cfft_radix4_instance_q31; + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q31_t *pTwiddle; /**< points to the twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix4_instance_q31; -/* Deprecated */ - void arm_cfft_radix4_q31( - const arm_cfft_radix4_instance_q31 * S, - q31_t * pSrc); + /* Deprecated */ + void arm_cfft_radix4_q31( + const arm_cfft_radix4_instance_q31 *S, + q31_t *pSrc); -/* Deprecated */ - arm_status arm_cfft_radix4_init_q31( - arm_cfft_radix4_instance_q31 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); + /* Deprecated */ + arm_status arm_cfft_radix4_init_q31( + arm_cfft_radix4_instance_q31 *S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); - /** + /** * @brief Instance structure for the floating-point CFFT/CIFFT function. */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - float32_t *pTwiddle; /**< points to the Twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - float32_t onebyfftLen; /**< value of 1/fftLen. */ - } arm_cfft_radix2_instance_f32; + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + float32_t *pTwiddle; /**< points to the Twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + float32_t onebyfftLen; /**< value of 1/fftLen. */ + } arm_cfft_radix2_instance_f32; -/* Deprecated */ - arm_status arm_cfft_radix2_init_f32( - arm_cfft_radix2_instance_f32 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); + /* Deprecated */ + arm_status arm_cfft_radix2_init_f32( + arm_cfft_radix2_instance_f32 *S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); -/* Deprecated */ - void arm_cfft_radix2_f32( - const arm_cfft_radix2_instance_f32 * S, - float32_t * pSrc); + /* Deprecated */ + void arm_cfft_radix2_f32( + const arm_cfft_radix2_instance_f32 *S, + float32_t *pSrc); - /** + /** * @brief Instance structure for the floating-point CFFT/CIFFT function. */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - float32_t *pTwiddle; /**< points to the Twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - float32_t onebyfftLen; /**< value of 1/fftLen. */ - } arm_cfft_radix4_instance_f32; + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + float32_t *pTwiddle; /**< points to the Twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + float32_t onebyfftLen; /**< value of 1/fftLen. */ + } arm_cfft_radix4_instance_f32; -/* Deprecated */ - arm_status arm_cfft_radix4_init_f32( - arm_cfft_radix4_instance_f32 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); + /* Deprecated */ + arm_status arm_cfft_radix4_init_f32( + arm_cfft_radix4_instance_f32 *S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); -/* Deprecated */ - void arm_cfft_radix4_f32( - const arm_cfft_radix4_instance_f32 * S, - float32_t * pSrc); + /* Deprecated */ + void arm_cfft_radix4_f32( + const arm_cfft_radix4_instance_f32 *S, + float32_t *pSrc); - /** + /** * @brief Instance structure for the fixed-point CFFT/CIFFT function. */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - const q15_t *pTwiddle; /**< points to the Twiddle factor table. */ - const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t bitRevLength; /**< bit reversal table length. */ - } arm_cfft_instance_q15; + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + const q15_t *pTwiddle; /**< points to the Twiddle factor table. */ + const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t bitRevLength; /**< bit reversal table length. */ + } arm_cfft_instance_q15; -void arm_cfft_q15( - const arm_cfft_instance_q15 * S, - q15_t * p1, - uint8_t ifftFlag, - uint8_t bitReverseFlag); + void arm_cfft_q15( + const arm_cfft_instance_q15 *S, + q15_t *p1, + uint8_t ifftFlag, + uint8_t bitReverseFlag); - /** + /** * @brief Instance structure for the fixed-point CFFT/CIFFT function. */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - const q31_t *pTwiddle; /**< points to the Twiddle factor table. */ - const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t bitRevLength; /**< bit reversal table length. */ - } arm_cfft_instance_q31; + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + const q31_t *pTwiddle; /**< points to the Twiddle factor table. */ + const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t bitRevLength; /**< bit reversal table length. */ + } arm_cfft_instance_q31; -void arm_cfft_q31( - const arm_cfft_instance_q31 * S, - q31_t * p1, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - - /** + void arm_cfft_q31( + const arm_cfft_instance_q31 *S, + q31_t *p1, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + /** * @brief Instance structure for the floating-point CFFT/CIFFT function. */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - const float32_t *pTwiddle; /**< points to the Twiddle factor table. */ - const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t bitRevLength; /**< bit reversal table length. */ - } arm_cfft_instance_f32; + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + const float32_t *pTwiddle; /**< points to the Twiddle factor table. */ + const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t bitRevLength; /**< bit reversal table length. */ + } arm_cfft_instance_f32; - void arm_cfft_f32( - const arm_cfft_instance_f32 * S, - float32_t * p1, - uint8_t ifftFlag, - uint8_t bitReverseFlag); + void arm_cfft_f32( + const arm_cfft_instance_f32 *S, + float32_t *p1, + uint8_t ifftFlag, + uint8_t bitReverseFlag); - /** + /** * @brief Instance structure for the Q15 RFFT/RIFFT function. */ - typedef struct - { - uint32_t fftLenReal; /**< length of the real FFT. */ - uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ - uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ - uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ - q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ - const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */ - } arm_rfft_instance_q15; + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_q15; - arm_status arm_rfft_init_q15( - arm_rfft_instance_q15 * S, - uint32_t fftLenReal, - uint32_t ifftFlagR, - uint32_t bitReverseFlag); + arm_status arm_rfft_init_q15( + arm_rfft_instance_q15 *S, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); - void arm_rfft_q15( - const arm_rfft_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst); + void arm_rfft_q15( + const arm_rfft_instance_q15 *S, + q15_t *pSrc, + q15_t *pDst); - /** + /** * @brief Instance structure for the Q31 RFFT/RIFFT function. */ - typedef struct - { - uint32_t fftLenReal; /**< length of the real FFT. */ - uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ - uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ - uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ - q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ - const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */ - } arm_rfft_instance_q31; + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_q31; - arm_status arm_rfft_init_q31( - arm_rfft_instance_q31 * S, - uint32_t fftLenReal, - uint32_t ifftFlagR, - uint32_t bitReverseFlag); + arm_status arm_rfft_init_q31( + arm_rfft_instance_q31 *S, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); - void arm_rfft_q31( - const arm_rfft_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst); + void arm_rfft_q31( + const arm_rfft_instance_q31 *S, + q31_t *pSrc, + q31_t *pDst); - /** + /** * @brief Instance structure for the floating-point RFFT/RIFFT function. */ - typedef struct - { - uint32_t fftLenReal; /**< length of the real FFT. */ - uint16_t fftLenBy2; /**< length of the complex FFT. */ - uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ - uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ - uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ - float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ - arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ - } arm_rfft_instance_f32; + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint16_t fftLenBy2; /**< length of the complex FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_f32; - arm_status arm_rfft_init_f32( - arm_rfft_instance_f32 * S, - arm_cfft_radix4_instance_f32 * S_CFFT, - uint32_t fftLenReal, - uint32_t ifftFlagR, - uint32_t bitReverseFlag); + arm_status arm_rfft_init_f32( + arm_rfft_instance_f32 *S, + arm_cfft_radix4_instance_f32 *S_CFFT, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); - void arm_rfft_f32( - const arm_rfft_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst); + void arm_rfft_f32( + const arm_rfft_instance_f32 *S, + float32_t *pSrc, + float32_t *pDst); - /** + /** * @brief Instance structure for the floating-point RFFT/RIFFT function. */ -typedef struct - { - arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */ - uint16_t fftLenRFFT; /**< length of the real sequence */ - float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */ - } arm_rfft_fast_instance_f32 ; + typedef struct + { + arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */ + uint16_t fftLenRFFT; /**< length of the real sequence */ + float32_t *pTwiddleRFFT; /**< Twiddle factors real stage */ + } arm_rfft_fast_instance_f32; -arm_status arm_rfft_fast_init_f32 ( - arm_rfft_fast_instance_f32 * S, - uint16_t fftLen); + arm_status arm_rfft_fast_init_f32( + arm_rfft_fast_instance_f32 *S, + uint16_t fftLen); -void arm_rfft_fast_f32( - arm_rfft_fast_instance_f32 * S, - float32_t * p, float32_t * pOut, - uint8_t ifftFlag); + void arm_rfft_fast_f32( + arm_rfft_fast_instance_f32 *S, + float32_t *p, float32_t *pOut, + uint8_t ifftFlag); - /** + /** * @brief Instance structure for the floating-point DCT4/IDCT4 function. */ - typedef struct - { - uint16_t N; /**< length of the DCT4. */ - uint16_t Nby2; /**< half of the length of the DCT4. */ - float32_t normalize; /**< normalizing factor. */ - float32_t *pTwiddle; /**< points to the twiddle factor table. */ - float32_t *pCosFactor; /**< points to the cosFactor table. */ - arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */ - arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ - } arm_dct4_instance_f32; + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + float32_t normalize; /**< normalizing factor. */ + float32_t *pTwiddle; /**< points to the twiddle factor table. */ + float32_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_f32; - /** + /** * @brief Initialization function for the floating-point DCT4/IDCT4. * @param[in,out] *S points to an instance of floating-point DCT4/IDCT4 structure. * @param[in] *S_RFFT points to an instance of floating-point RFFT/RIFFT structure. @@ -2379,18 +2321,18 @@ void arm_rfft_fast_f32( * @param[in] N length of the DCT4. * @param[in] Nby2 half of the length of the DCT4. * @param[in] normalize normalizing factor. - * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported transform length. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported transform length. */ - arm_status arm_dct4_init_f32( - arm_dct4_instance_f32 * S, - arm_rfft_instance_f32 * S_RFFT, - arm_cfft_radix4_instance_f32 * S_CFFT, - uint16_t N, - uint16_t Nby2, - float32_t normalize); + arm_status arm_dct4_init_f32( + arm_dct4_instance_f32 *S, + arm_rfft_instance_f32 *S_RFFT, + arm_cfft_radix4_instance_f32 *S_CFFT, + uint16_t N, + uint16_t Nby2, + float32_t normalize); - /** + /** * @brief Processing function for the floating-point DCT4/IDCT4. * @param[in] *S points to an instance of the floating-point DCT4/IDCT4 structure. * @param[in] *pState points to state buffer. @@ -2398,27 +2340,27 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_dct4_f32( - const arm_dct4_instance_f32 * S, - float32_t * pState, - float32_t * pInlineBuffer); + void arm_dct4_f32( + const arm_dct4_instance_f32 *S, + float32_t *pState, + float32_t *pInlineBuffer); - /** + /** * @brief Instance structure for the Q31 DCT4/IDCT4 function. */ - typedef struct - { - uint16_t N; /**< length of the DCT4. */ - uint16_t Nby2; /**< half of the length of the DCT4. */ - q31_t normalize; /**< normalizing factor. */ - q31_t *pTwiddle; /**< points to the twiddle factor table. */ - q31_t *pCosFactor; /**< points to the cosFactor table. */ - arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */ - arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */ - } arm_dct4_instance_q31; + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + q31_t normalize; /**< normalizing factor. */ + q31_t *pTwiddle; /**< points to the twiddle factor table. */ + q31_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_q31; - /** + /** * @brief Initialization function for the Q31 DCT4/IDCT4. * @param[in,out] *S points to an instance of Q31 DCT4/IDCT4 structure. * @param[in] *S_RFFT points to an instance of Q31 RFFT/RIFFT structure @@ -2426,18 +2368,18 @@ void arm_rfft_fast_f32( * @param[in] N length of the DCT4. * @param[in] Nby2 half of the length of the DCT4. * @param[in] normalize normalizing factor. - * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. */ - arm_status arm_dct4_init_q31( - arm_dct4_instance_q31 * S, - arm_rfft_instance_q31 * S_RFFT, - arm_cfft_radix4_instance_q31 * S_CFFT, - uint16_t N, - uint16_t Nby2, - q31_t normalize); + arm_status arm_dct4_init_q31( + arm_dct4_instance_q31 *S, + arm_rfft_instance_q31 *S_RFFT, + arm_cfft_radix4_instance_q31 *S_CFFT, + uint16_t N, + uint16_t Nby2, + q31_t normalize); - /** + /** * @brief Processing function for the Q31 DCT4/IDCT4. * @param[in] *S points to an instance of the Q31 DCT4 structure. * @param[in] *pState points to state buffer. @@ -2445,27 +2387,27 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_dct4_q31( - const arm_dct4_instance_q31 * S, - q31_t * pState, - q31_t * pInlineBuffer); + void arm_dct4_q31( + const arm_dct4_instance_q31 *S, + q31_t *pState, + q31_t *pInlineBuffer); - /** + /** * @brief Instance structure for the Q15 DCT4/IDCT4 function. */ - typedef struct - { - uint16_t N; /**< length of the DCT4. */ - uint16_t Nby2; /**< half of the length of the DCT4. */ - q15_t normalize; /**< normalizing factor. */ - q15_t *pTwiddle; /**< points to the twiddle factor table. */ - q15_t *pCosFactor; /**< points to the cosFactor table. */ - arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */ - arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */ - } arm_dct4_instance_q15; + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + q15_t normalize; /**< normalizing factor. */ + q15_t *pTwiddle; /**< points to the twiddle factor table. */ + q15_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_q15; - /** + /** * @brief Initialization function for the Q15 DCT4/IDCT4. * @param[in,out] *S points to an instance of Q15 DCT4/IDCT4 structure. * @param[in] *S_RFFT points to an instance of Q15 RFFT/RIFFT structure. @@ -2473,18 +2415,18 @@ void arm_rfft_fast_f32( * @param[in] N length of the DCT4. * @param[in] Nby2 half of the length of the DCT4. * @param[in] normalize normalizing factor. - * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. */ - arm_status arm_dct4_init_q15( - arm_dct4_instance_q15 * S, - arm_rfft_instance_q15 * S_RFFT, - arm_cfft_radix4_instance_q15 * S_CFFT, - uint16_t N, - uint16_t Nby2, - q15_t normalize); + arm_status arm_dct4_init_q15( + arm_dct4_instance_q15 *S, + arm_rfft_instance_q15 *S_RFFT, + arm_cfft_radix4_instance_q15 *S_CFFT, + uint16_t N, + uint16_t Nby2, + q15_t normalize); - /** + /** * @brief Processing function for the Q15 DCT4/IDCT4. * @param[in] *S points to an instance of the Q15 DCT4 structure. * @param[in] *pState points to state buffer. @@ -2492,12 +2434,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_dct4_q15( - const arm_dct4_instance_q15 * S, - q15_t * pState, - q15_t * pInlineBuffer); + void arm_dct4_q15( + const arm_dct4_instance_q15 *S, + q15_t *pState, + q15_t *pInlineBuffer); - /** + /** * @brief Floating-point vector addition. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2506,13 +2448,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_add_f32( - float32_t * pSrcA, - float32_t * pSrcB, - float32_t * pDst, - uint32_t blockSize); + void arm_add_f32( + float32_t *pSrcA, + float32_t *pSrcB, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q7 vector addition. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2521,13 +2463,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_add_q7( - q7_t * pSrcA, - q7_t * pSrcB, - q7_t * pDst, - uint32_t blockSize); + void arm_add_q7( + q7_t *pSrcA, + q7_t *pSrcB, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q15 vector addition. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2536,13 +2478,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_add_q15( - q15_t * pSrcA, - q15_t * pSrcB, - q15_t * pDst, - uint32_t blockSize); + void arm_add_q15( + q15_t *pSrcA, + q15_t *pSrcB, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q31 vector addition. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2551,13 +2493,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_add_q31( - q31_t * pSrcA, - q31_t * pSrcB, - q31_t * pDst, - uint32_t blockSize); + void arm_add_q31( + q31_t *pSrcA, + q31_t *pSrcB, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Floating-point vector subtraction. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2566,13 +2508,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_sub_f32( - float32_t * pSrcA, - float32_t * pSrcB, - float32_t * pDst, - uint32_t blockSize); + void arm_sub_f32( + float32_t *pSrcA, + float32_t *pSrcB, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q7 vector subtraction. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2581,13 +2523,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_sub_q7( - q7_t * pSrcA, - q7_t * pSrcB, - q7_t * pDst, - uint32_t blockSize); + void arm_sub_q7( + q7_t *pSrcA, + q7_t *pSrcB, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q15 vector subtraction. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2596,13 +2538,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_sub_q15( - q15_t * pSrcA, - q15_t * pSrcB, - q15_t * pDst, - uint32_t blockSize); + void arm_sub_q15( + q15_t *pSrcA, + q15_t *pSrcB, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q31 vector subtraction. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2611,13 +2553,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_sub_q31( - q31_t * pSrcA, - q31_t * pSrcB, - q31_t * pDst, - uint32_t blockSize); + void arm_sub_q31( + q31_t *pSrcA, + q31_t *pSrcB, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Multiplies a floating-point vector by a scalar. * @param[in] *pSrc points to the input vector * @param[in] scale scale factor to be applied @@ -2626,13 +2568,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_scale_f32( - float32_t * pSrc, - float32_t scale, - float32_t * pDst, - uint32_t blockSize); + void arm_scale_f32( + float32_t *pSrc, + float32_t scale, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Multiplies a Q7 vector by a scalar. * @param[in] *pSrc points to the input vector * @param[in] scaleFract fractional portion of the scale value @@ -2642,14 +2584,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_scale_q7( - q7_t * pSrc, - q7_t scaleFract, - int8_t shift, - q7_t * pDst, - uint32_t blockSize); + void arm_scale_q7( + q7_t *pSrc, + q7_t scaleFract, + int8_t shift, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Multiplies a Q15 vector by a scalar. * @param[in] *pSrc points to the input vector * @param[in] scaleFract fractional portion of the scale value @@ -2659,14 +2601,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_scale_q15( - q15_t * pSrc, - q15_t scaleFract, - int8_t shift, - q15_t * pDst, - uint32_t blockSize); + void arm_scale_q15( + q15_t *pSrc, + q15_t scaleFract, + int8_t shift, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Multiplies a Q31 vector by a scalar. * @param[in] *pSrc points to the input vector * @param[in] scaleFract fractional portion of the scale value @@ -2676,14 +2618,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_scale_q31( - q31_t * pSrc, - q31_t scaleFract, - int8_t shift, - q31_t * pDst, - uint32_t blockSize); + void arm_scale_q31( + q31_t *pSrc, + q31_t scaleFract, + int8_t shift, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q7 vector absolute value. * @param[in] *pSrc points to the input buffer * @param[out] *pDst points to the output buffer @@ -2691,12 +2633,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_abs_q7( - q7_t * pSrc, - q7_t * pDst, - uint32_t blockSize); + void arm_abs_q7( + q7_t *pSrc, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Floating-point vector absolute value. * @param[in] *pSrc points to the input buffer * @param[out] *pDst points to the output buffer @@ -2704,12 +2646,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_abs_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_abs_f32( + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q15 vector absolute value. * @param[in] *pSrc points to the input buffer * @param[out] *pDst points to the output buffer @@ -2717,12 +2659,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_abs_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_abs_q15( + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Q31 vector absolute value. * @param[in] *pSrc points to the input buffer * @param[out] *pDst points to the output buffer @@ -2730,12 +2672,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_abs_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_abs_q31( + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Dot product of floating-point vectors. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2744,13 +2686,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_dot_prod_f32( - float32_t * pSrcA, - float32_t * pSrcB, - uint32_t blockSize, - float32_t * result); + void arm_dot_prod_f32( + float32_t *pSrcA, + float32_t *pSrcB, + uint32_t blockSize, + float32_t *result); - /** + /** * @brief Dot product of Q7 vectors. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2759,13 +2701,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_dot_prod_q7( - q7_t * pSrcA, - q7_t * pSrcB, - uint32_t blockSize, - q31_t * result); + void arm_dot_prod_q7( + q7_t *pSrcA, + q7_t *pSrcB, + uint32_t blockSize, + q31_t *result); - /** + /** * @brief Dot product of Q15 vectors. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2774,13 +2716,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_dot_prod_q15( - q15_t * pSrcA, - q15_t * pSrcB, - uint32_t blockSize, - q63_t * result); + void arm_dot_prod_q15( + q15_t *pSrcA, + q15_t *pSrcB, + uint32_t blockSize, + q63_t *result); - /** + /** * @brief Dot product of Q31 vectors. * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -2789,13 +2731,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_dot_prod_q31( - q31_t * pSrcA, - q31_t * pSrcB, - uint32_t blockSize, - q63_t * result); + void arm_dot_prod_q31( + q31_t *pSrcA, + q31_t *pSrcB, + uint32_t blockSize, + q63_t *result); - /** + /** * @brief Shifts the elements of a Q7 vector a specified number of bits. * @param[in] *pSrc points to the input vector * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. @@ -2804,13 +2746,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_shift_q7( - q7_t * pSrc, - int8_t shiftBits, - q7_t * pDst, - uint32_t blockSize); + void arm_shift_q7( + q7_t *pSrc, + int8_t shiftBits, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Shifts the elements of a Q15 vector a specified number of bits. * @param[in] *pSrc points to the input vector * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. @@ -2819,13 +2761,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_shift_q15( - q15_t * pSrc, - int8_t shiftBits, - q15_t * pDst, - uint32_t blockSize); + void arm_shift_q15( + q15_t *pSrc, + int8_t shiftBits, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Shifts the elements of a Q31 vector a specified number of bits. * @param[in] *pSrc points to the input vector * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. @@ -2834,13 +2776,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_shift_q31( - q31_t * pSrc, - int8_t shiftBits, - q31_t * pDst, - uint32_t blockSize); + void arm_shift_q31( + q31_t *pSrc, + int8_t shiftBits, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Adds a constant offset to a floating-point vector. * @param[in] *pSrc points to the input vector * @param[in] offset is the offset to be added @@ -2849,13 +2791,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_offset_f32( - float32_t * pSrc, - float32_t offset, - float32_t * pDst, - uint32_t blockSize); + void arm_offset_f32( + float32_t *pSrc, + float32_t offset, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Adds a constant offset to a Q7 vector. * @param[in] *pSrc points to the input vector * @param[in] offset is the offset to be added @@ -2864,13 +2806,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_offset_q7( - q7_t * pSrc, - q7_t offset, - q7_t * pDst, - uint32_t blockSize); + void arm_offset_q7( + q7_t *pSrc, + q7_t offset, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Adds a constant offset to a Q15 vector. * @param[in] *pSrc points to the input vector * @param[in] offset is the offset to be added @@ -2879,13 +2821,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_offset_q15( - q15_t * pSrc, - q15_t offset, - q15_t * pDst, - uint32_t blockSize); + void arm_offset_q15( + q15_t *pSrc, + q15_t offset, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Adds a constant offset to a Q31 vector. * @param[in] *pSrc points to the input vector * @param[in] offset is the offset to be added @@ -2894,13 +2836,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_offset_q31( - q31_t * pSrc, - q31_t offset, - q31_t * pDst, - uint32_t blockSize); + void arm_offset_q31( + q31_t *pSrc, + q31_t offset, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Negates the elements of a floating-point vector. * @param[in] *pSrc points to the input vector * @param[out] *pDst points to the output vector @@ -2908,12 +2850,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_negate_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_negate_f32( + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Negates the elements of a Q7 vector. * @param[in] *pSrc points to the input vector * @param[out] *pDst points to the output vector @@ -2921,12 +2863,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_negate_q7( - q7_t * pSrc, - q7_t * pDst, - uint32_t blockSize); + void arm_negate_q7( + q7_t *pSrc, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Negates the elements of a Q15 vector. * @param[in] *pSrc points to the input vector * @param[out] *pDst points to the output vector @@ -2934,12 +2876,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_negate_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_negate_q15( + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Negates the elements of a Q31 vector. * @param[in] *pSrc points to the input vector * @param[out] *pDst points to the output vector @@ -2947,106 +2889,106 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_negate_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - /** + void arm_negate_q31( + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); + /** * @brief Copies the elements of a floating-point vector. * @param[in] *pSrc input pointer * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_copy_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_copy_f32( + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Copies the elements of a Q7 vector. * @param[in] *pSrc input pointer * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_copy_q7( - q7_t * pSrc, - q7_t * pDst, - uint32_t blockSize); + void arm_copy_q7( + q7_t *pSrc, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Copies the elements of a Q15 vector. * @param[in] *pSrc input pointer * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_copy_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_copy_q15( + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Copies the elements of a Q31 vector. * @param[in] *pSrc input pointer * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_copy_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - /** + void arm_copy_q31( + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); + /** * @brief Fills a constant value into a floating-point vector. * @param[in] value input value to be filled * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_fill_f32( - float32_t value, - float32_t * pDst, - uint32_t blockSize); + void arm_fill_f32( + float32_t value, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Fills a constant value into a Q7 vector. * @param[in] value input value to be filled * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_fill_q7( - q7_t value, - q7_t * pDst, - uint32_t blockSize); + void arm_fill_q7( + q7_t value, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Fills a constant value into a Q15 vector. * @param[in] value input value to be filled * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_fill_q15( - q15_t value, - q15_t * pDst, - uint32_t blockSize); + void arm_fill_q15( + q15_t value, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Fills a constant value into a Q31 vector. * @param[in] value input value to be filled * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_fill_q31( - q31_t value, - q31_t * pDst, - uint32_t blockSize); + void arm_fill_q31( + q31_t value, + q31_t *pDst, + uint32_t blockSize); -/** + /** * @brief Convolution of floating-point sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3056,15 +2998,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_conv_f32( - float32_t * pSrcA, - uint32_t srcALen, - float32_t * pSrcB, - uint32_t srcBLen, - float32_t * pDst); + void arm_conv_f32( + float32_t *pSrcA, + uint32_t srcALen, + float32_t *pSrcB, + uint32_t srcBLen, + float32_t *pDst); - - /** + /** * @brief Convolution of Q15 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3076,18 +3017,16 @@ void arm_rfft_fast_f32( * @return none. */ + void arm_conv_opt_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst, + q15_t *pScratch1, + q15_t *pScratch2); - void arm_conv_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - q15_t * pScratch1, - q15_t * pScratch2); - - -/** + /** * @brief Convolution of Q15 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3097,14 +3036,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_conv_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst); + void arm_conv_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst); - /** + /** * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3114,14 +3053,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_conv_fast_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst); + void arm_conv_fast_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst); - /** + /** * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3133,18 +3072,16 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_conv_fast_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - q15_t * pScratch1, - q15_t * pScratch2); + void arm_conv_fast_opt_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst, + q15_t *pScratch1, + q15_t *pScratch2); - - - /** + /** * @brief Convolution of Q31 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3154,14 +3091,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_conv_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst); + void arm_conv_q31( + q31_t *pSrcA, + uint32_t srcALen, + q31_t *pSrcB, + uint32_t srcBLen, + q31_t *pDst); - /** + /** * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3171,13 +3108,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_conv_fast_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst); - + void arm_conv_fast_q31( + q31_t *pSrcA, + uint32_t srcALen, + q31_t *pSrcB, + uint32_t srcBLen, + q31_t *pDst); /** * @brief Convolution of Q7 sequences. @@ -3191,18 +3127,16 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_conv_opt_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst, - q15_t * pScratch1, - q15_t * pScratch2); + void arm_conv_opt_q7( + q7_t *pSrcA, + uint32_t srcALen, + q7_t *pSrcB, + uint32_t srcBLen, + q7_t *pDst, + q15_t *pScratch1, + q15_t *pScratch2); - - - /** + /** * @brief Convolution of Q7 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3212,15 +3146,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_conv_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst); + void arm_conv_q7( + q7_t *pSrcA, + uint32_t srcALen, + q7_t *pSrcB, + uint32_t srcBLen, + q7_t *pDst); - - /** + /** * @brief Partial convolution of floating-point sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3232,14 +3165,14 @@ void arm_rfft_fast_f32( * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. */ - arm_status arm_conv_partial_f32( - float32_t * pSrcA, - uint32_t srcALen, - float32_t * pSrcB, - uint32_t srcBLen, - float32_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); + arm_status arm_conv_partial_f32( + float32_t *pSrcA, + uint32_t srcALen, + float32_t *pSrcB, + uint32_t srcBLen, + float32_t *pDst, + uint32_t firstIndex, + uint32_t numPoints); /** * @brief Partial convolution of Q15 sequences. @@ -3255,19 +3188,18 @@ void arm_rfft_fast_f32( * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. */ - arm_status arm_conv_partial_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - uint32_t firstIndex, - uint32_t numPoints, - q15_t * pScratch1, - q15_t * pScratch2); + arm_status arm_conv_partial_opt_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t *pScratch1, + q15_t *pScratch2); - -/** + /** * @brief Partial convolution of Q15 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3279,16 +3211,16 @@ void arm_rfft_fast_f32( * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. */ - arm_status arm_conv_partial_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); + arm_status arm_conv_partial_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst, + uint32_t firstIndex, + uint32_t numPoints); - /** + /** * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3300,17 +3232,16 @@ void arm_rfft_fast_f32( * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. */ - arm_status arm_conv_partial_fast_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); + arm_status arm_conv_partial_fast_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst, + uint32_t firstIndex, + uint32_t numPoints); - - /** + /** * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3324,19 +3255,18 @@ void arm_rfft_fast_f32( * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. */ - arm_status arm_conv_partial_fast_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - uint32_t firstIndex, - uint32_t numPoints, - q15_t * pScratch1, - q15_t * pScratch2); + arm_status arm_conv_partial_fast_opt_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t *pScratch1, + q15_t *pScratch2); - - /** + /** * @brief Partial convolution of Q31 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3348,17 +3278,16 @@ void arm_rfft_fast_f32( * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. */ - arm_status arm_conv_partial_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); + arm_status arm_conv_partial_q31( + q31_t *pSrcA, + uint32_t srcALen, + q31_t *pSrcB, + uint32_t srcBLen, + q31_t *pDst, + uint32_t firstIndex, + uint32_t numPoints); - - /** + /** * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3370,17 +3299,16 @@ void arm_rfft_fast_f32( * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. */ - arm_status arm_conv_partial_fast_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); + arm_status arm_conv_partial_fast_q31( + q31_t *pSrcA, + uint32_t srcALen, + q31_t *pSrcB, + uint32_t srcBLen, + q31_t *pDst, + uint32_t firstIndex, + uint32_t numPoints); - - /** + /** * @brief Partial convolution of Q7 sequences * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3394,19 +3322,18 @@ void arm_rfft_fast_f32( * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. */ - arm_status arm_conv_partial_opt_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst, - uint32_t firstIndex, - uint32_t numPoints, - q15_t * pScratch1, - q15_t * pScratch2); + arm_status arm_conv_partial_opt_q7( + q7_t *pSrcA, + uint32_t srcALen, + q7_t *pSrcB, + uint32_t srcBLen, + q7_t *pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t *pScratch1, + q15_t *pScratch2); - -/** + /** * @brief Partial convolution of Q7 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -3418,58 +3345,54 @@ void arm_rfft_fast_f32( * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. */ - arm_status arm_conv_partial_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); + arm_status arm_conv_partial_q7( + q7_t *pSrcA, + uint32_t srcALen, + q7_t *pSrcB, + uint32_t srcBLen, + q7_t *pDst, + uint32_t firstIndex, + uint32_t numPoints); - - - /** + /** * @brief Instance structure for the Q15 FIR decimator. */ - typedef struct - { - uint8_t M; /**< decimation factor. */ - uint16_t numTaps; /**< number of coefficients in the filter. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - } arm_fir_decimate_instance_q15; + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + } arm_fir_decimate_instance_q15; - /** + /** * @brief Instance structure for the Q31 FIR decimator. */ - typedef struct - { - uint8_t M; /**< decimation factor. */ - uint16_t numTaps; /**< number of coefficients in the filter. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - } arm_fir_decimate_instance_q31; + } arm_fir_decimate_instance_q31; - /** + /** * @brief Instance structure for the floating-point FIR decimator. */ - typedef struct - { - uint8_t M; /**< decimation factor. */ - uint16_t numTaps; /**< number of coefficients in the filter. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - } arm_fir_decimate_instance_f32; + } arm_fir_decimate_instance_f32; - - - /** + /** * @brief Processing function for the floating-point FIR decimator. * @param[in] *S points to an instance of the floating-point FIR decimator structure. * @param[in] *pSrc points to the block of input data. @@ -3478,14 +3401,13 @@ void arm_rfft_fast_f32( * @return none */ - void arm_fir_decimate_f32( - const arm_fir_decimate_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_fir_decimate_f32( + const arm_fir_decimate_instance_f32 *S, + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Initialization function for the floating-point FIR decimator. * @param[in,out] *S points to an instance of the floating-point FIR decimator structure. * @param[in] numTaps number of coefficients in the filter. @@ -3497,15 +3419,15 @@ void arm_rfft_fast_f32( * blockSize is not a multiple of M. */ - arm_status arm_fir_decimate_init_f32( - arm_fir_decimate_instance_f32 * S, - uint16_t numTaps, - uint8_t M, - float32_t * pCoeffs, - float32_t * pState, - uint32_t blockSize); + arm_status arm_fir_decimate_init_f32( + arm_fir_decimate_instance_f32 *S, + uint16_t numTaps, + uint8_t M, + float32_t *pCoeffs, + float32_t *pState, + uint32_t blockSize); - /** + /** * @brief Processing function for the Q15 FIR decimator. * @param[in] *S points to an instance of the Q15 FIR decimator structure. * @param[in] *pSrc points to the block of input data. @@ -3514,13 +3436,13 @@ void arm_rfft_fast_f32( * @return none */ - void arm_fir_decimate_q15( - const arm_fir_decimate_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_fir_decimate_q15( + const arm_fir_decimate_instance_q15 *S, + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. * @param[in] *S points to an instance of the Q15 FIR decimator structure. * @param[in] *pSrc points to the block of input data. @@ -3529,15 +3451,13 @@ void arm_rfft_fast_f32( * @return none */ - void arm_fir_decimate_fast_q15( - const arm_fir_decimate_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_fir_decimate_fast_q15( + const arm_fir_decimate_instance_q15 *S, + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - - - /** + /** * @brief Initialization function for the Q15 FIR decimator. * @param[in,out] *S points to an instance of the Q15 FIR decimator structure. * @param[in] numTaps number of coefficients in the filter. @@ -3549,15 +3469,15 @@ void arm_rfft_fast_f32( * blockSize is not a multiple of M. */ - arm_status arm_fir_decimate_init_q15( - arm_fir_decimate_instance_q15 * S, - uint16_t numTaps, - uint8_t M, - q15_t * pCoeffs, - q15_t * pState, - uint32_t blockSize); + arm_status arm_fir_decimate_init_q15( + arm_fir_decimate_instance_q15 *S, + uint16_t numTaps, + uint8_t M, + q15_t *pCoeffs, + q15_t *pState, + uint32_t blockSize); - /** + /** * @brief Processing function for the Q31 FIR decimator. * @param[in] *S points to an instance of the Q31 FIR decimator structure. * @param[in] *pSrc points to the block of input data. @@ -3566,13 +3486,13 @@ void arm_rfft_fast_f32( * @return none */ - void arm_fir_decimate_q31( - const arm_fir_decimate_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_fir_decimate_q31( + const arm_fir_decimate_instance_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. * @param[in] *S points to an instance of the Q31 FIR decimator structure. * @param[in] *pSrc points to the block of input data. @@ -3581,14 +3501,13 @@ void arm_rfft_fast_f32( * @return none */ - void arm_fir_decimate_fast_q31( - arm_fir_decimate_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_fir_decimate_fast_q31( + arm_fir_decimate_instance_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Initialization function for the Q31 FIR decimator. * @param[in,out] *S points to an instance of the Q31 FIR decimator structure. * @param[in] numTaps number of coefficients in the filter. @@ -3600,54 +3519,51 @@ void arm_rfft_fast_f32( * blockSize is not a multiple of M. */ - arm_status arm_fir_decimate_init_q31( - arm_fir_decimate_instance_q31 * S, - uint16_t numTaps, - uint8_t M, - q31_t * pCoeffs, - q31_t * pState, - uint32_t blockSize); + arm_status arm_fir_decimate_init_q31( + arm_fir_decimate_instance_q31 *S, + uint16_t numTaps, + uint8_t M, + q31_t *pCoeffs, + q31_t *pState, + uint32_t blockSize); - - - /** + /** * @brief Instance structure for the Q15 FIR interpolator. */ - typedef struct - { - uint8_t L; /**< upsample factor. */ - uint16_t phaseLength; /**< length of each polyphase filter component. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ - q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ - } arm_fir_interpolate_instance_q15; + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ + } arm_fir_interpolate_instance_q15; - /** + /** * @brief Instance structure for the Q31 FIR interpolator. */ - typedef struct - { - uint8_t L; /**< upsample factor. */ - uint16_t phaseLength; /**< length of each polyphase filter component. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ - q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ - } arm_fir_interpolate_instance_q31; + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ + } arm_fir_interpolate_instance_q31; - /** + /** * @brief Instance structure for the floating-point FIR interpolator. */ - typedef struct - { - uint8_t L; /**< upsample factor. */ - uint16_t phaseLength; /**< length of each polyphase filter component. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ - float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */ - } arm_fir_interpolate_instance_f32; + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */ + } arm_fir_interpolate_instance_f32; - - /** + /** * @brief Processing function for the Q15 FIR interpolator. * @param[in] *S points to an instance of the Q15 FIR interpolator structure. * @param[in] *pSrc points to the block of input data. @@ -3656,14 +3572,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_interpolate_q15( - const arm_fir_interpolate_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_fir_interpolate_q15( + const arm_fir_interpolate_instance_q15 *S, + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Initialization function for the Q15 FIR interpolator. * @param[in,out] *S points to an instance of the Q15 FIR interpolator structure. * @param[in] L upsample factor. @@ -3675,15 +3590,15 @@ void arm_rfft_fast_f32( * the filter length numTaps is not a multiple of the interpolation factor L. */ - arm_status arm_fir_interpolate_init_q15( - arm_fir_interpolate_instance_q15 * S, - uint8_t L, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - uint32_t blockSize); + arm_status arm_fir_interpolate_init_q15( + arm_fir_interpolate_instance_q15 *S, + uint8_t L, + uint16_t numTaps, + q15_t *pCoeffs, + q15_t *pState, + uint32_t blockSize); - /** + /** * @brief Processing function for the Q31 FIR interpolator. * @param[in] *S points to an instance of the Q15 FIR interpolator structure. * @param[in] *pSrc points to the block of input data. @@ -3692,13 +3607,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_interpolate_q31( - const arm_fir_interpolate_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_fir_interpolate_q31( + const arm_fir_interpolate_instance_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the Q31 FIR interpolator. * @param[in,out] *S points to an instance of the Q31 FIR interpolator structure. * @param[in] L upsample factor. @@ -3710,16 +3625,15 @@ void arm_rfft_fast_f32( * the filter length numTaps is not a multiple of the interpolation factor L. */ - arm_status arm_fir_interpolate_init_q31( - arm_fir_interpolate_instance_q31 * S, - uint8_t L, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - uint32_t blockSize); + arm_status arm_fir_interpolate_init_q31( + arm_fir_interpolate_instance_q31 *S, + uint8_t L, + uint16_t numTaps, + q31_t *pCoeffs, + q31_t *pState, + uint32_t blockSize); - - /** + /** * @brief Processing function for the floating-point FIR interpolator. * @param[in] *S points to an instance of the floating-point FIR interpolator structure. * @param[in] *pSrc points to the block of input data. @@ -3728,13 +3642,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_interpolate_f32( - const arm_fir_interpolate_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_fir_interpolate_f32( + const arm_fir_interpolate_instance_f32 *S, + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the floating-point FIR interpolator. * @param[in,out] *S points to an instance of the floating-point FIR interpolator structure. * @param[in] L upsample factor. @@ -3746,29 +3660,28 @@ void arm_rfft_fast_f32( * the filter length numTaps is not a multiple of the interpolation factor L. */ - arm_status arm_fir_interpolate_init_f32( - arm_fir_interpolate_instance_f32 * S, - uint8_t L, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - uint32_t blockSize); + arm_status arm_fir_interpolate_init_f32( + arm_fir_interpolate_instance_f32 *S, + uint8_t L, + uint16_t numTaps, + float32_t *pCoeffs, + float32_t *pState, + uint32_t blockSize); - /** + /** * @brief Instance structure for the high precision Q31 Biquad cascade filter. */ - typedef struct - { - uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ - q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ - uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */ + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ + q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */ - } arm_biquad_cas_df1_32x64_ins_q31; + } arm_biquad_cas_df1_32x64_ins_q31; - - /** + /** * @param[in] *S points to an instance of the high precision Q31 Biquad cascade filter structure. * @param[in] *pSrc points to the block of input data. * @param[out] *pDst points to the block of output data @@ -3776,14 +3689,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_biquad_cas_df1_32x64_q31( - const arm_biquad_cas_df1_32x64_ins_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_biquad_cas_df1_32x64_q31( + const arm_biquad_cas_df1_32x64_ins_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - - /** + /** * @param[in,out] *S points to an instance of the high precision Q31 Biquad cascade filter structure. * @param[in] numStages number of 2nd order stages in the filter. * @param[in] *pCoeffs points to the filter coefficients. @@ -3792,54 +3704,47 @@ void arm_rfft_fast_f32( * @return none */ - void arm_biquad_cas_df1_32x64_init_q31( - arm_biquad_cas_df1_32x64_ins_q31 * S, - uint8_t numStages, - q31_t * pCoeffs, - q63_t * pState, - uint8_t postShift); + void arm_biquad_cas_df1_32x64_init_q31( + arm_biquad_cas_df1_32x64_ins_q31 *S, + uint8_t numStages, + q31_t *pCoeffs, + q63_t *pState, + uint8_t postShift); - - - /** + /** * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. */ - typedef struct - { - uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ - float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ - } arm_biquad_cascade_df2T_instance_f32; + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ + float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_cascade_df2T_instance_f32; - - - /** + /** * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. */ - typedef struct - { - uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ - float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ - } arm_biquad_cascade_stereo_df2T_instance_f32; + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ + float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_cascade_stereo_df2T_instance_f32; - - - /** + /** * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. */ - typedef struct - { - uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ - float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ - } arm_biquad_cascade_df2T_instance_f64; + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ + float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_cascade_df2T_instance_f64; - - /** + /** * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. * @param[in] *S points to an instance of the filter data structure. * @param[in] *pSrc points to the block of input data. @@ -3848,14 +3753,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_biquad_cascade_df2T_f32( - const arm_biquad_cascade_df2T_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_biquad_cascade_df2T_f32( + const arm_biquad_cascade_df2T_instance_f32 *S, + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels * @param[in] *S points to an instance of the filter data structure. * @param[in] *pSrc points to the block of input data. @@ -3864,13 +3768,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_biquad_cascade_stereo_df2T_f32( - const arm_biquad_cascade_stereo_df2T_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_biquad_cascade_stereo_df2T_f32( + const arm_biquad_cascade_stereo_df2T_instance_f32 *S, + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. * @param[in] *S points to an instance of the filter data structure. * @param[in] *pSrc points to the block of input data. @@ -3879,14 +3783,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_biquad_cascade_df2T_f64( - const arm_biquad_cascade_df2T_instance_f64 * S, - float64_t * pSrc, - float64_t * pDst, - uint32_t blockSize); + void arm_biquad_cascade_df2T_f64( + const arm_biquad_cascade_df2T_instance_f64 *S, + float64_t *pSrc, + float64_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. * @param[in,out] *S points to an instance of the filter data structure. * @param[in] numStages number of 2nd order stages in the filter. @@ -3895,14 +3798,13 @@ void arm_rfft_fast_f32( * @return none */ - void arm_biquad_cascade_df2T_init_f32( - arm_biquad_cascade_df2T_instance_f32 * S, - uint8_t numStages, - float32_t * pCoeffs, - float32_t * pState); + void arm_biquad_cascade_df2T_init_f32( + arm_biquad_cascade_df2T_instance_f32 *S, + uint8_t numStages, + float32_t *pCoeffs, + float32_t *pState); - - /** + /** * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. * @param[in,out] *S points to an instance of the filter data structure. * @param[in] numStages number of 2nd order stages in the filter. @@ -3911,14 +3813,13 @@ void arm_rfft_fast_f32( * @return none */ - void arm_biquad_cascade_stereo_df2T_init_f32( - arm_biquad_cascade_stereo_df2T_instance_f32 * S, - uint8_t numStages, - float32_t * pCoeffs, - float32_t * pState); + void arm_biquad_cascade_stereo_df2T_init_f32( + arm_biquad_cascade_stereo_df2T_instance_f32 *S, + uint8_t numStages, + float32_t *pCoeffs, + float32_t *pState); - - /** + /** * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. * @param[in,out] *S points to an instance of the filter data structure. * @param[in] numStages number of 2nd order stages in the filter. @@ -3927,48 +3828,46 @@ void arm_rfft_fast_f32( * @return none */ - void arm_biquad_cascade_df2T_init_f64( - arm_biquad_cascade_df2T_instance_f64 * S, - uint8_t numStages, - float64_t * pCoeffs, - float64_t * pState); + void arm_biquad_cascade_df2T_init_f64( + arm_biquad_cascade_df2T_instance_f64 *S, + uint8_t numStages, + float64_t *pCoeffs, + float64_t *pState); - - - /** + /** * @brief Instance structure for the Q15 FIR lattice filter. */ - typedef struct - { - uint16_t numStages; /**< number of filter stages. */ - q15_t *pState; /**< points to the state variable array. The array is of length numStages. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ - } arm_fir_lattice_instance_q15; + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + q15_t *pState; /**< points to the state variable array. The array is of length numStages. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_q15; - /** + /** * @brief Instance structure for the Q31 FIR lattice filter. */ - typedef struct - { - uint16_t numStages; /**< number of filter stages. */ - q31_t *pState; /**< points to the state variable array. The array is of length numStages. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ - } arm_fir_lattice_instance_q31; + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + q31_t *pState; /**< points to the state variable array. The array is of length numStages. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_q31; - /** + /** * @brief Instance structure for the floating-point FIR lattice filter. */ - typedef struct - { - uint16_t numStages; /**< number of filter stages. */ - float32_t *pState; /**< points to the state variable array. The array is of length numStages. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ - } arm_fir_lattice_instance_f32; + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + float32_t *pState; /**< points to the state variable array. The array is of length numStages. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_f32; - /** + /** * @brief Initialization function for the Q15 FIR lattice filter. * @param[in] *S points to an instance of the Q15 FIR lattice structure. * @param[in] numStages number of filter stages. @@ -3977,14 +3876,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_lattice_init_q15( - arm_fir_lattice_instance_q15 * S, - uint16_t numStages, - q15_t * pCoeffs, - q15_t * pState); + void arm_fir_lattice_init_q15( + arm_fir_lattice_instance_q15 *S, + uint16_t numStages, + q15_t *pCoeffs, + q15_t *pState); - - /** + /** * @brief Processing function for the Q15 FIR lattice filter. * @param[in] *S points to an instance of the Q15 FIR lattice structure. * @param[in] *pSrc points to the block of input data. @@ -3992,13 +3890,13 @@ void arm_rfft_fast_f32( * @param[in] blockSize number of samples to process. * @return none. */ - void arm_fir_lattice_q15( - const arm_fir_lattice_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_fir_lattice_q15( + const arm_fir_lattice_instance_q15 *S, + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the Q31 FIR lattice filter. * @param[in] *S points to an instance of the Q31 FIR lattice structure. * @param[in] numStages number of filter stages. @@ -4007,14 +3905,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_lattice_init_q31( - arm_fir_lattice_instance_q31 * S, - uint16_t numStages, - q31_t * pCoeffs, - q31_t * pState); + void arm_fir_lattice_init_q31( + arm_fir_lattice_instance_q31 *S, + uint16_t numStages, + q31_t *pCoeffs, + q31_t *pState); - - /** + /** * @brief Processing function for the Q31 FIR lattice filter. * @param[in] *S points to an instance of the Q31 FIR lattice structure. * @param[in] *pSrc points to the block of input data. @@ -4023,13 +3920,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_lattice_q31( - const arm_fir_lattice_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_fir_lattice_q31( + const arm_fir_lattice_instance_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); -/** + /** * @brief Initialization function for the floating-point FIR lattice filter. * @param[in] *S points to an instance of the floating-point FIR lattice structure. * @param[in] numStages number of filter stages. @@ -4038,13 +3935,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_lattice_init_f32( - arm_fir_lattice_instance_f32 * S, - uint16_t numStages, - float32_t * pCoeffs, - float32_t * pState); + void arm_fir_lattice_init_f32( + arm_fir_lattice_instance_f32 *S, + uint16_t numStages, + float32_t *pCoeffs, + float32_t *pState); - /** + /** * @brief Processing function for the floating-point FIR lattice filter. * @param[in] *S points to an instance of the floating-point FIR lattice structure. * @param[in] *pSrc points to the block of input data. @@ -4053,46 +3950,46 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_lattice_f32( - const arm_fir_lattice_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_fir_lattice_f32( + const arm_fir_lattice_instance_f32 *S, + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Instance structure for the Q15 IIR lattice filter. */ - typedef struct - { - uint16_t numStages; /**< number of stages in the filter. */ - q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ - q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ - q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ - } arm_iir_lattice_instance_q15; + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_q15; - /** + /** * @brief Instance structure for the Q31 IIR lattice filter. */ - typedef struct - { - uint16_t numStages; /**< number of stages in the filter. */ - q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ - q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ - q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ - } arm_iir_lattice_instance_q31; + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_q31; - /** + /** * @brief Instance structure for the floating-point IIR lattice filter. */ - typedef struct - { - uint16_t numStages; /**< number of stages in the filter. */ - float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ - float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ - float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ - } arm_iir_lattice_instance_f32; + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_f32; - /** + /** * @brief Processing function for the floating-point IIR lattice filter. * @param[in] *S points to an instance of the floating-point IIR lattice structure. * @param[in] *pSrc points to the block of input data. @@ -4101,13 +3998,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_iir_lattice_f32( - const arm_iir_lattice_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_iir_lattice_f32( + const arm_iir_lattice_instance_f32 *S, + float32_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @brief Initialization function for the floating-point IIR lattice filter. * @param[in] *S points to an instance of the floating-point IIR lattice structure. * @param[in] numStages number of stages in the filter. @@ -4118,16 +4015,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_iir_lattice_init_f32( - arm_iir_lattice_instance_f32 * S, - uint16_t numStages, - float32_t * pkCoeffs, - float32_t * pvCoeffs, - float32_t * pState, - uint32_t blockSize); + void arm_iir_lattice_init_f32( + arm_iir_lattice_instance_f32 *S, + uint16_t numStages, + float32_t *pkCoeffs, + float32_t *pvCoeffs, + float32_t *pState, + uint32_t blockSize); - - /** + /** * @brief Processing function for the Q31 IIR lattice filter. * @param[in] *S points to an instance of the Q31 IIR lattice structure. * @param[in] *pSrc points to the block of input data. @@ -4136,14 +4032,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_iir_lattice_q31( - const arm_iir_lattice_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_iir_lattice_q31( + const arm_iir_lattice_instance_q31 *S, + q31_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Initialization function for the Q31 IIR lattice filter. * @param[in] *S points to an instance of the Q31 IIR lattice structure. * @param[in] numStages number of stages in the filter. @@ -4154,16 +4049,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_iir_lattice_init_q31( - arm_iir_lattice_instance_q31 * S, - uint16_t numStages, - q31_t * pkCoeffs, - q31_t * pvCoeffs, - q31_t * pState, - uint32_t blockSize); + void arm_iir_lattice_init_q31( + arm_iir_lattice_instance_q31 *S, + uint16_t numStages, + q31_t *pkCoeffs, + q31_t *pvCoeffs, + q31_t *pState, + uint32_t blockSize); - - /** + /** * @brief Processing function for the Q15 IIR lattice filter. * @param[in] *S points to an instance of the Q15 IIR lattice structure. * @param[in] *pSrc points to the block of input data. @@ -4172,14 +4066,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_iir_lattice_q15( - const arm_iir_lattice_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_iir_lattice_q15( + const arm_iir_lattice_instance_q15 *S, + q15_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - -/** + /** * @brief Initialization function for the Q15 IIR lattice filter. * @param[in] *S points to an instance of the fixed-point Q15 IIR lattice structure. * @param[in] numStages number of stages in the filter. @@ -4190,27 +4083,27 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_iir_lattice_init_q15( - arm_iir_lattice_instance_q15 * S, - uint16_t numStages, - q15_t * pkCoeffs, - q15_t * pvCoeffs, - q15_t * pState, - uint32_t blockSize); + void arm_iir_lattice_init_q15( + arm_iir_lattice_instance_q15 *S, + uint16_t numStages, + q15_t *pkCoeffs, + q15_t *pvCoeffs, + q15_t *pState, + uint32_t blockSize); - /** + /** * @brief Instance structure for the floating-point LMS filter. */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - float32_t mu; /**< step size that controls filter coefficient updates. */ - } arm_lms_instance_f32; + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + float32_t mu; /**< step size that controls filter coefficient updates. */ + } arm_lms_instance_f32; - /** + /** * @brief Processing function for floating-point LMS filter. * @param[in] *S points to an instance of the floating-point LMS filter structure. * @param[in] *pSrc points to the block of input data. @@ -4221,15 +4114,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_f32( - const arm_lms_instance_f32 * S, - float32_t * pSrc, - float32_t * pRef, - float32_t * pOut, - float32_t * pErr, - uint32_t blockSize); + void arm_lms_f32( + const arm_lms_instance_f32 *S, + float32_t *pSrc, + float32_t *pRef, + float32_t *pOut, + float32_t *pErr, + uint32_t blockSize); - /** + /** * @brief Initialization function for floating-point LMS filter. * @param[in] *S points to an instance of the floating-point LMS filter structure. * @param[in] numTaps number of filter coefficients. @@ -4240,29 +4133,28 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_init_f32( - arm_lms_instance_f32 * S, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - float32_t mu, - uint32_t blockSize); + void arm_lms_init_f32( + arm_lms_instance_f32 *S, + uint16_t numTaps, + float32_t *pCoeffs, + float32_t *pState, + float32_t mu, + uint32_t blockSize); - /** + /** * @brief Instance structure for the Q15 LMS filter. */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - q15_t mu; /**< step size that controls filter coefficient updates. */ - uint32_t postShift; /**< bit shift applied to coefficients. */ - } arm_lms_instance_q15; + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q15_t mu; /**< step size that controls filter coefficient updates. */ + uint32_t postShift; /**< bit shift applied to coefficients. */ + } arm_lms_instance_q15; - - /** + /** * @brief Initialization function for the Q15 LMS filter. * @param[in] *S points to an instance of the Q15 LMS filter structure. * @param[in] numTaps number of filter coefficients. @@ -4274,16 +4166,16 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_init_q15( - arm_lms_instance_q15 * S, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - q15_t mu, - uint32_t blockSize, - uint32_t postShift); + void arm_lms_init_q15( + arm_lms_instance_q15 *S, + uint16_t numTaps, + q15_t *pCoeffs, + q15_t *pState, + q15_t mu, + uint32_t blockSize, + uint32_t postShift); - /** + /** * @brief Processing function for Q15 LMS filter. * @param[in] *S points to an instance of the Q15 LMS filter structure. * @param[in] *pSrc points to the block of input data. @@ -4294,30 +4186,29 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_q15( - const arm_lms_instance_q15 * S, - q15_t * pSrc, - q15_t * pRef, - q15_t * pOut, - q15_t * pErr, - uint32_t blockSize); + void arm_lms_q15( + const arm_lms_instance_q15 *S, + q15_t *pSrc, + q15_t *pRef, + q15_t *pOut, + q15_t *pErr, + uint32_t blockSize); - - /** + /** * @brief Instance structure for the Q31 LMS filter. */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - q31_t mu; /**< step size that controls filter coefficient updates. */ - uint32_t postShift; /**< bit shift applied to coefficients. */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q31_t mu; /**< step size that controls filter coefficient updates. */ + uint32_t postShift; /**< bit shift applied to coefficients. */ - } arm_lms_instance_q31; + } arm_lms_instance_q31; - /** + /** * @brief Processing function for Q31 LMS filter. * @param[in] *S points to an instance of the Q15 LMS filter structure. * @param[in] *pSrc points to the block of input data. @@ -4328,15 +4219,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_q31( - const arm_lms_instance_q31 * S, - q31_t * pSrc, - q31_t * pRef, - q31_t * pOut, - q31_t * pErr, - uint32_t blockSize); + void arm_lms_q31( + const arm_lms_instance_q31 *S, + q31_t *pSrc, + q31_t *pRef, + q31_t *pOut, + q31_t *pErr, + uint32_t blockSize); - /** + /** * @brief Initialization function for Q31 LMS filter. * @param[in] *S points to an instance of the Q31 LMS filter structure. * @param[in] numTaps number of filter coefficients. @@ -4348,30 +4239,30 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_init_q31( - arm_lms_instance_q31 * S, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - q31_t mu, - uint32_t blockSize, - uint32_t postShift); + void arm_lms_init_q31( + arm_lms_instance_q31 *S, + uint16_t numTaps, + q31_t *pCoeffs, + q31_t *pState, + q31_t mu, + uint32_t blockSize, + uint32_t postShift); - /** + /** * @brief Instance structure for the floating-point normalized LMS filter. */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - float32_t mu; /**< step size that control filter coefficient updates. */ - float32_t energy; /**< saves previous frame energy. */ - float32_t x0; /**< saves previous input sample. */ - } arm_lms_norm_instance_f32; + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + float32_t mu; /**< step size that control filter coefficient updates. */ + float32_t energy; /**< saves previous frame energy. */ + float32_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_f32; - /** + /** * @brief Processing function for floating-point normalized LMS filter. * @param[in] *S points to an instance of the floating-point normalized LMS filter structure. * @param[in] *pSrc points to the block of input data. @@ -4382,15 +4273,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_norm_f32( - arm_lms_norm_instance_f32 * S, - float32_t * pSrc, - float32_t * pRef, - float32_t * pOut, - float32_t * pErr, - uint32_t blockSize); + void arm_lms_norm_f32( + arm_lms_norm_instance_f32 *S, + float32_t *pSrc, + float32_t *pRef, + float32_t *pOut, + float32_t *pErr, + uint32_t blockSize); - /** + /** * @brief Initialization function for floating-point normalized LMS filter. * @param[in] *S points to an instance of the floating-point LMS filter structure. * @param[in] numTaps number of filter coefficients. @@ -4401,31 +4292,30 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_norm_init_f32( - arm_lms_norm_instance_f32 * S, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - float32_t mu, - uint32_t blockSize); + void arm_lms_norm_init_f32( + arm_lms_norm_instance_f32 *S, + uint16_t numTaps, + float32_t *pCoeffs, + float32_t *pState, + float32_t mu, + uint32_t blockSize); - - /** + /** * @brief Instance structure for the Q31 normalized LMS filter. */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - q31_t mu; /**< step size that controls filter coefficient updates. */ - uint8_t postShift; /**< bit shift applied to coefficients. */ - q31_t *recipTable; /**< points to the reciprocal initial value table. */ - q31_t energy; /**< saves previous frame energy. */ - q31_t x0; /**< saves previous input sample. */ - } arm_lms_norm_instance_q31; + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q31_t mu; /**< step size that controls filter coefficient updates. */ + uint8_t postShift; /**< bit shift applied to coefficients. */ + q31_t *recipTable; /**< points to the reciprocal initial value table. */ + q31_t energy; /**< saves previous frame energy. */ + q31_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_q31; - /** + /** * @brief Processing function for Q31 normalized LMS filter. * @param[in] *S points to an instance of the Q31 normalized LMS filter structure. * @param[in] *pSrc points to the block of input data. @@ -4436,15 +4326,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_norm_q31( - arm_lms_norm_instance_q31 * S, - q31_t * pSrc, - q31_t * pRef, - q31_t * pOut, - q31_t * pErr, - uint32_t blockSize); + void arm_lms_norm_q31( + arm_lms_norm_instance_q31 *S, + q31_t *pSrc, + q31_t *pRef, + q31_t *pOut, + q31_t *pErr, + uint32_t blockSize); - /** + /** * @brief Initialization function for Q31 normalized LMS filter. * @param[in] *S points to an instance of the Q31 normalized LMS filter structure. * @param[in] numTaps number of filter coefficients. @@ -4456,32 +4346,32 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_norm_init_q31( - arm_lms_norm_instance_q31 * S, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - q31_t mu, - uint32_t blockSize, - uint8_t postShift); + void arm_lms_norm_init_q31( + arm_lms_norm_instance_q31 *S, + uint16_t numTaps, + q31_t *pCoeffs, + q31_t *pState, + q31_t mu, + uint32_t blockSize, + uint8_t postShift); - /** + /** * @brief Instance structure for the Q15 normalized LMS filter. */ - typedef struct - { - uint16_t numTaps; /**< Number of coefficients in the filter. */ - q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - q15_t mu; /**< step size that controls filter coefficient updates. */ - uint8_t postShift; /**< bit shift applied to coefficients. */ - q15_t *recipTable; /**< Points to the reciprocal initial value table. */ - q15_t energy; /**< saves previous frame energy. */ - q15_t x0; /**< saves previous input sample. */ - } arm_lms_norm_instance_q15; + typedef struct + { + uint16_t numTaps; /**< Number of coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q15_t mu; /**< step size that controls filter coefficient updates. */ + uint8_t postShift; /**< bit shift applied to coefficients. */ + q15_t *recipTable; /**< Points to the reciprocal initial value table. */ + q15_t energy; /**< saves previous frame energy. */ + q15_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_q15; - /** + /** * @brief Processing function for Q15 normalized LMS filter. * @param[in] *S points to an instance of the Q15 normalized LMS filter structure. * @param[in] *pSrc points to the block of input data. @@ -4492,16 +4382,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_norm_q15( - arm_lms_norm_instance_q15 * S, - q15_t * pSrc, - q15_t * pRef, - q15_t * pOut, - q15_t * pErr, - uint32_t blockSize); + void arm_lms_norm_q15( + arm_lms_norm_instance_q15 *S, + q15_t *pSrc, + q15_t *pRef, + q15_t *pOut, + q15_t *pErr, + uint32_t blockSize); - - /** + /** * @brief Initialization function for Q15 normalized LMS filter. * @param[in] *S points to an instance of the Q15 normalized LMS filter structure. * @param[in] numTaps number of filter coefficients. @@ -4513,16 +4402,16 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_lms_norm_init_q15( - arm_lms_norm_instance_q15 * S, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - q15_t mu, - uint32_t blockSize, - uint8_t postShift); + void arm_lms_norm_init_q15( + arm_lms_norm_instance_q15 *S, + uint16_t numTaps, + q15_t *pCoeffs, + q15_t *pState, + q15_t mu, + uint32_t blockSize, + uint8_t postShift); - /** + /** * @brief Correlation of floating-point sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -4532,15 +4421,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_correlate_f32( - float32_t * pSrcA, - uint32_t srcALen, - float32_t * pSrcB, - uint32_t srcBLen, - float32_t * pDst); + void arm_correlate_f32( + float32_t *pSrcA, + uint32_t srcALen, + float32_t *pSrcB, + uint32_t srcBLen, + float32_t *pDst); - - /** + /** * @brief Correlation of Q15 sequences * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -4550,16 +4438,15 @@ void arm_rfft_fast_f32( * @param[in] *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. * @return none. */ - void arm_correlate_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - q15_t * pScratch); + void arm_correlate_opt_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst, + q15_t *pScratch); - - /** + /** * @brief Correlation of Q15 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -4569,14 +4456,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_correlate_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst); + void arm_correlate_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst); - /** + /** * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -4586,16 +4473,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_correlate_fast_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst); + void arm_correlate_fast_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst); - - - /** + /** * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -4606,15 +4491,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_correlate_fast_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - q15_t * pScratch); + void arm_correlate_fast_opt_q15( + q15_t *pSrcA, + uint32_t srcALen, + q15_t *pSrcB, + uint32_t srcBLen, + q15_t *pDst, + q15_t *pScratch); - /** + /** * @brief Correlation of Q31 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -4624,14 +4509,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_correlate_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst); + void arm_correlate_q31( + q31_t *pSrcA, + uint32_t srcALen, + q31_t *pSrcB, + uint32_t srcBLen, + q31_t *pDst); - /** + /** * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -4641,16 +4526,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_correlate_fast_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst); + void arm_correlate_fast_q31( + q31_t *pSrcA, + uint32_t srcALen, + q31_t *pSrcB, + uint32_t srcBLen, + q31_t *pDst); - - - /** + /** * @brief Correlation of Q7 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -4662,17 +4545,16 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_correlate_opt_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst, - q15_t * pScratch1, - q15_t * pScratch2); + void arm_correlate_opt_q7( + q7_t *pSrcA, + uint32_t srcALen, + q7_t *pSrcB, + uint32_t srcBLen, + q7_t *pDst, + q15_t *pScratch1, + q15_t *pScratch2); - - /** + /** * @brief Correlation of Q7 sequences. * @param[in] *pSrcA points to the first input sequence. * @param[in] srcALen length of the first input sequence. @@ -4682,70 +4564,69 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_correlate_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst); + void arm_correlate_q7( + q7_t *pSrcA, + uint32_t srcALen, + q7_t *pSrcB, + uint32_t srcBLen, + q7_t *pDst); - - /** + /** * @brief Instance structure for the floating-point sparse FIR filter. */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ - float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ - int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ - } arm_fir_sparse_instance_f32; + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_f32; - /** + /** * @brief Instance structure for the Q31 sparse FIR filter. */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ - q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ - int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ - } arm_fir_sparse_instance_q31; + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q31; - /** + /** * @brief Instance structure for the Q15 sparse FIR filter. */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ - q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ - int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ - } arm_fir_sparse_instance_q15; + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q15; - /** + /** * @brief Instance structure for the Q7 sparse FIR filter. */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ - q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ - q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ - int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ - } arm_fir_sparse_instance_q7; + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q7; - /** + /** * @brief Processing function for the floating-point sparse FIR filter. * @param[in] *S points to an instance of the floating-point sparse FIR structure. * @param[in] *pSrc points to the block of input data. @@ -4755,14 +4636,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_sparse_f32( - arm_fir_sparse_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - float32_t * pScratchIn, - uint32_t blockSize); + void arm_fir_sparse_f32( + arm_fir_sparse_instance_f32 *S, + float32_t *pSrc, + float32_t *pDst, + float32_t *pScratchIn, + uint32_t blockSize); - /** + /** * @brief Initialization function for the floating-point sparse FIR filter. * @param[in,out] *S points to an instance of the floating-point sparse FIR structure. * @param[in] numTaps number of nonzero coefficients in the filter. @@ -4774,16 +4655,16 @@ void arm_rfft_fast_f32( * @return none */ - void arm_fir_sparse_init_f32( - arm_fir_sparse_instance_f32 * S, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - int32_t * pTapDelay, - uint16_t maxDelay, - uint32_t blockSize); + void arm_fir_sparse_init_f32( + arm_fir_sparse_instance_f32 *S, + uint16_t numTaps, + float32_t *pCoeffs, + float32_t *pState, + int32_t *pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); - /** + /** * @brief Processing function for the Q31 sparse FIR filter. * @param[in] *S points to an instance of the Q31 sparse FIR structure. * @param[in] *pSrc points to the block of input data. @@ -4793,14 +4674,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_sparse_q31( - arm_fir_sparse_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - q31_t * pScratchIn, - uint32_t blockSize); + void arm_fir_sparse_q31( + arm_fir_sparse_instance_q31 *S, + q31_t *pSrc, + q31_t *pDst, + q31_t *pScratchIn, + uint32_t blockSize); - /** + /** * @brief Initialization function for the Q31 sparse FIR filter. * @param[in,out] *S points to an instance of the Q31 sparse FIR structure. * @param[in] numTaps number of nonzero coefficients in the filter. @@ -4812,16 +4693,16 @@ void arm_rfft_fast_f32( * @return none */ - void arm_fir_sparse_init_q31( - arm_fir_sparse_instance_q31 * S, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - int32_t * pTapDelay, - uint16_t maxDelay, - uint32_t blockSize); + void arm_fir_sparse_init_q31( + arm_fir_sparse_instance_q31 *S, + uint16_t numTaps, + q31_t *pCoeffs, + q31_t *pState, + int32_t *pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); - /** + /** * @brief Processing function for the Q15 sparse FIR filter. * @param[in] *S points to an instance of the Q15 sparse FIR structure. * @param[in] *pSrc points to the block of input data. @@ -4832,16 +4713,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_sparse_q15( - arm_fir_sparse_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - q15_t * pScratchIn, - q31_t * pScratchOut, - uint32_t blockSize); + void arm_fir_sparse_q15( + arm_fir_sparse_instance_q15 *S, + q15_t *pSrc, + q15_t *pDst, + q15_t *pScratchIn, + q31_t *pScratchOut, + uint32_t blockSize); - - /** + /** * @brief Initialization function for the Q15 sparse FIR filter. * @param[in,out] *S points to an instance of the Q15 sparse FIR structure. * @param[in] numTaps number of nonzero coefficients in the filter. @@ -4853,16 +4733,16 @@ void arm_rfft_fast_f32( * @return none */ - void arm_fir_sparse_init_q15( - arm_fir_sparse_instance_q15 * S, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - int32_t * pTapDelay, - uint16_t maxDelay, - uint32_t blockSize); + void arm_fir_sparse_init_q15( + arm_fir_sparse_instance_q15 *S, + uint16_t numTaps, + q15_t *pCoeffs, + q15_t *pState, + int32_t *pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); - /** + /** * @brief Processing function for the Q7 sparse FIR filter. * @param[in] *S points to an instance of the Q7 sparse FIR structure. * @param[in] *pSrc points to the block of input data. @@ -4873,15 +4753,15 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_fir_sparse_q7( - arm_fir_sparse_instance_q7 * S, - q7_t * pSrc, - q7_t * pDst, - q7_t * pScratchIn, - q31_t * pScratchOut, - uint32_t blockSize); + void arm_fir_sparse_q7( + arm_fir_sparse_instance_q7 *S, + q7_t *pSrc, + q7_t *pDst, + q7_t *pScratchIn, + q31_t *pScratchOut, + uint32_t blockSize); - /** + /** * @brief Initialization function for the Q7 sparse FIR filter. * @param[in,out] *S points to an instance of the Q7 sparse FIR structure. * @param[in] numTaps number of nonzero coefficients in the filter. @@ -4893,17 +4773,16 @@ void arm_rfft_fast_f32( * @return none */ - void arm_fir_sparse_init_q7( - arm_fir_sparse_instance_q7 * S, - uint16_t numTaps, - q7_t * pCoeffs, - q7_t * pState, - int32_t * pTapDelay, - uint16_t maxDelay, - uint32_t blockSize); + void arm_fir_sparse_init_q7( + arm_fir_sparse_instance_q7 *S, + uint16_t numTaps, + q7_t *pCoeffs, + q7_t *pState, + int32_t *pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); - - /* + /* * @brief Floating-point sin_cos function. * @param[in] theta input value in degrees * @param[out] *pSinVal points to the processed sine output. @@ -4911,12 +4790,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_sin_cos_f32( - float32_t theta, - float32_t * pSinVal, - float32_t * pCcosVal); + void arm_sin_cos_f32( + float32_t theta, + float32_t *pSinVal, + float32_t *pCcosVal); - /* + /* * @brief Q31 sin_cos function. * @param[in] theta scaled input value in degrees * @param[out] *pSinVal points to the processed sine output. @@ -4924,13 +4803,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_sin_cos_q31( - q31_t theta, - q31_t * pSinVal, - q31_t * pCosVal); + void arm_sin_cos_q31( + q31_t theta, + q31_t *pSinVal, + q31_t *pCosVal); - - /** + /** * @brief Floating-point complex conjugate. * @param[in] *pSrc points to the input vector * @param[out] *pDst points to the output vector @@ -4938,12 +4816,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_conj_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t numSamples); + void arm_cmplx_conj_f32( + float32_t *pSrc, + float32_t *pDst, + uint32_t numSamples); - /** + /** * @brief Q31 complex conjugate. * @param[in] *pSrc points to the input vector * @param[out] *pDst points to the output vector @@ -4951,12 +4829,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_conj_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t numSamples); + void arm_cmplx_conj_q31( + q31_t *pSrc, + q31_t *pDst, + uint32_t numSamples); - /** + /** * @brief Q15 complex conjugate. * @param[in] *pSrc points to the input vector * @param[out] *pDst points to the output vector @@ -4964,14 +4842,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_conj_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t numSamples); + void arm_cmplx_conj_q15( + q15_t *pSrc, + q15_t *pDst, + uint32_t numSamples); - - - /** + /** * @brief Floating-point complex magnitude squared * @param[in] *pSrc points to the complex input vector * @param[out] *pDst points to the real output vector @@ -4979,12 +4855,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mag_squared_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t numSamples); + void arm_cmplx_mag_squared_f32( + float32_t *pSrc, + float32_t *pDst, + uint32_t numSamples); - /** + /** * @brief Q31 complex magnitude squared * @param[in] *pSrc points to the complex input vector * @param[out] *pDst points to the real output vector @@ -4992,12 +4868,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mag_squared_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t numSamples); + void arm_cmplx_mag_squared_q31( + q31_t *pSrc, + q31_t *pDst, + uint32_t numSamples); - /** + /** * @brief Q15 complex magnitude squared * @param[in] *pSrc points to the complex input vector * @param[out] *pDst points to the real output vector @@ -5005,17 +4881,16 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mag_squared_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t numSamples); + void arm_cmplx_mag_squared_q15( + q15_t *pSrc, + q15_t *pDst, + uint32_t numSamples); - - /** + /** * @ingroup groupController */ - /** + /** * @defgroup PID PID Motor Control * * A Proportional Integral Derivative (PID) controller is a generic feedback control @@ -5072,40 +4947,38 @@ void arm_rfft_fast_f32( * Refer to the function specific documentation below for usage guidelines. */ - /** + /** * @addtogroup PID * @{ */ - /** + /** * @brief Process function for the floating-point PID Control. * @param[in,out] *S is an instance of the floating-point PID Control structure * @param[in] in input sample to process * @return out processed output sample. */ + static __INLINE float32_t arm_pid_f32( + arm_pid_instance_f32 *S, + float32_t in) + { + float32_t out; - static __INLINE float32_t arm_pid_f32( - arm_pid_instance_f32 * S, - float32_t in) - { - float32_t out; + /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */ + out = (S->A0 * in) + + (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]); - /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */ - out = (S->A0 * in) + - (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]); + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; - /* Update state */ - S->state[1] = S->state[0]; - S->state[0] = in; - S->state[2] = out; + /* return to application */ + return (out); + } - /* return to application */ - return (out); - - } - - /** + /** * @brief Process function for the Q31 PID Control. * @param[in,out] *S points to an instance of the Q31 PID Control structure * @param[in] in input sample to process @@ -5120,39 +4993,38 @@ void arm_rfft_fast_f32( * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format. */ - static __INLINE q31_t arm_pid_q31( - arm_pid_instance_q31 * S, - q31_t in) - { - q63_t acc; - q31_t out; + static __INLINE q31_t arm_pid_q31( + arm_pid_instance_q31 *S, + q31_t in) + { + q63_t acc; + q31_t out; - /* acc = A0 * x[n] */ - acc = (q63_t) S->A0 * in; + /* acc = A0 * x[n] */ + acc = (q63_t)S->A0 * in; - /* acc += A1 * x[n-1] */ - acc += (q63_t) S->A1 * S->state[0]; + /* acc += A1 * x[n-1] */ + acc += (q63_t)S->A1 * S->state[0]; - /* acc += A2 * x[n-2] */ - acc += (q63_t) S->A2 * S->state[1]; + /* acc += A2 * x[n-2] */ + acc += (q63_t)S->A2 * S->state[1]; - /* convert output to 1.31 format to add y[n-1] */ - out = (q31_t) (acc >> 31u); + /* convert output to 1.31 format to add y[n-1] */ + out = (q31_t)(acc >> 31u); - /* out += y[n-1] */ - out += S->state[2]; + /* out += y[n-1] */ + out += S->state[2]; - /* Update state */ - S->state[1] = S->state[0]; - S->state[0] = in; - S->state[2] = out; + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; - /* return to application */ - return (out); + /* return to application */ + return (out); + } - } - - /** + /** * @brief Process function for the Q15 PID Control. * @param[in,out] *S points to an instance of the Q15 PID Control structure * @param[in] in input sample to process @@ -5168,57 +5040,55 @@ void arm_rfft_fast_f32( * Lastly, the accumulator is saturated to yield a result in 1.15 format. */ - static __INLINE q15_t arm_pid_q15( - arm_pid_instance_q15 * S, - q15_t in) - { - q63_t acc; - q15_t out; + static __INLINE q15_t arm_pid_q15( + arm_pid_instance_q15 *S, + q15_t in) + { + q63_t acc; + q15_t out; #ifndef ARM_MATH_CM0_FAMILY - __SIMD32_TYPE *vstate; + __SIMD32_TYPE *vstate; - /* Implementation of PID controller */ + /* Implementation of PID controller */ - /* acc = A0 * x[n] */ - acc = (q31_t) __SMUAD(S->A0, in); + /* acc = A0 * x[n] */ + acc = (q31_t)__SMUAD(S->A0, in); - /* acc += A1 * x[n-1] + A2 * x[n-2] */ - vstate = __SIMD32_CONST(S->state); - acc = __SMLALD(S->A1, (q31_t) *vstate, acc); + /* acc += A1 * x[n-1] + A2 * x[n-2] */ + vstate = __SIMD32_CONST(S->state); + acc = __SMLALD(S->A1, (q31_t)*vstate, acc); #else /* acc = A0 * x[n] */ - acc = ((q31_t) S->A0) * in; + acc = ((q31_t)S->A0) * in; /* acc += A1 * x[n-1] + A2 * x[n-2] */ - acc += (q31_t) S->A1 * S->state[0]; - acc += (q31_t) S->A2 * S->state[1]; + acc += (q31_t)S->A1 * S->state[0]; + acc += (q31_t)S->A2 * S->state[1]; #endif - /* acc += y[n-1] */ - acc += (q31_t) S->state[2] << 15; + /* acc += y[n-1] */ + acc += (q31_t)S->state[2] << 15; - /* saturate the output */ - out = (q15_t) (__SSAT((acc >> 15), 16)); + /* saturate the output */ + out = (q15_t)(__SSAT((acc >> 15), 16)); - /* Update state */ - S->state[1] = S->state[0]; - S->state[0] = in; - S->state[2] = out; + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; - /* return to application */ - return (out); + /* return to application */ + return (out); + } - } - - /** + /** * @} end of PID group */ - - /** + /** * @brief Floating-point matrix inverse. * @param[in] *src points to the instance of the input floating-point matrix structure. * @param[out] *dst points to the instance of the output floating-point matrix structure. @@ -5226,12 +5096,11 @@ void arm_rfft_fast_f32( * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR. */ - arm_status arm_mat_inverse_f32( - const arm_matrix_instance_f32 * src, - arm_matrix_instance_f32 * dst); + arm_status arm_mat_inverse_f32( + const arm_matrix_instance_f32 *src, + arm_matrix_instance_f32 *dst); - - /** + /** * @brief Floating-point matrix inverse. * @param[in] *src points to the instance of the input floating-point matrix structure. * @param[out] *dst points to the instance of the output floating-point matrix structure. @@ -5239,18 +5108,15 @@ void arm_rfft_fast_f32( * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR. */ - arm_status arm_mat_inverse_f64( - const arm_matrix_instance_f64 * src, - arm_matrix_instance_f64 * dst); + arm_status arm_mat_inverse_f64( + const arm_matrix_instance_f64 *src, + arm_matrix_instance_f64 *dst); - - - /** + /** * @ingroup groupController */ - - /** + /** * @defgroup clarke Vector Clarke Transform * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector. * Generally the Clarke transform uses three-phase currents Ia, Ib and Ic to calculate currents @@ -5272,12 +5138,12 @@ void arm_rfft_fast_f32( * Refer to the function specific documentation below for usage guidelines. */ - /** + /** * @addtogroup clarke * @{ */ - /** + /** * * @brief Floating-point Clarke transform * @param[in] Ia input three-phase coordinate a @@ -5287,22 +5153,21 @@ void arm_rfft_fast_f32( * @return none. */ - static __INLINE void arm_clarke_f32( - float32_t Ia, - float32_t Ib, - float32_t * pIalpha, - float32_t * pIbeta) - { - /* Calculate pIalpha using the equation, pIalpha = Ia */ - *pIalpha = Ia; + static __INLINE void arm_clarke_f32( + float32_t Ia, + float32_t Ib, + float32_t *pIalpha, + float32_t *pIbeta) + { + /* Calculate pIalpha using the equation, pIalpha = Ia */ + *pIalpha = Ia; - /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */ - *pIbeta = - ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib); + /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */ + *pIbeta = + ((float32_t)0.57735026919 * Ia + (float32_t)1.15470053838 * Ib); + } - } - - /** + /** * @brief Clarke transform for Q31 version * @param[in] Ia input three-phase coordinate a * @param[in] Ib input three-phase coordinate b @@ -5317,51 +5182,48 @@ void arm_rfft_fast_f32( * There is saturation on the addition, hence there is no risk of overflow. */ - static __INLINE void arm_clarke_q31( - q31_t Ia, - q31_t Ib, - q31_t * pIalpha, - q31_t * pIbeta) - { - q31_t product1, product2; /* Temporary variables used to store intermediate results */ + static __INLINE void arm_clarke_q31( + q31_t Ia, + q31_t Ib, + q31_t *pIalpha, + q31_t *pIbeta) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ - /* Calculating pIalpha from Ia by equation pIalpha = Ia */ - *pIalpha = Ia; + /* Calculating pIalpha from Ia by equation pIalpha = Ia */ + *pIalpha = Ia; - /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */ - product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30); + /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */ + product1 = (q31_t)(((q63_t)Ia * 0x24F34E8B) >> 30); - /* Intermediate product is calculated by (2/sqrt(3) * Ib) */ - product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30); + /* Intermediate product is calculated by (2/sqrt(3) * Ib) */ + product2 = (q31_t)(((q63_t)Ib * 0x49E69D16) >> 30); - /* pIbeta is calculated by adding the intermediate products */ - *pIbeta = __QADD(product1, product2); - } + /* pIbeta is calculated by adding the intermediate products */ + *pIbeta = __QADD(product1, product2); + } - /** + /** * @} end of clarke group */ - /** + /** * @brief Converts the elements of the Q7 vector to Q31 vector. * @param[in] *pSrc input pointer * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_q7_to_q31( - q7_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_q7_to_q31( + q7_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - - - - /** + /** * @ingroup groupController */ - /** + /** * @defgroup inv_clarke Vector Inverse Clarke Transform * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases. * @@ -5377,12 +5239,12 @@ void arm_rfft_fast_f32( * Refer to the function specific documentation below for usage guidelines. */ - /** + /** * @addtogroup inv_clarke * @{ */ - /** + /** * @brief Floating-point Inverse Clarke transform * @param[in] Ialpha input two-phase orthogonal vector axis alpha * @param[in] Ibeta input two-phase orthogonal vector axis beta @@ -5391,22 +5253,20 @@ void arm_rfft_fast_f32( * @return none. */ + static __INLINE void arm_inv_clarke_f32( + float32_t Ialpha, + float32_t Ibeta, + float32_t *pIa, + float32_t *pIb) + { + /* Calculating pIa from Ialpha by equation pIa = Ialpha */ + *pIa = Ialpha; - static __INLINE void arm_inv_clarke_f32( - float32_t Ialpha, - float32_t Ibeta, - float32_t * pIa, - float32_t * pIb) - { - /* Calculating pIa from Ialpha by equation pIa = Ialpha */ - *pIa = Ialpha; + /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */ + *pIb = -0.5 * Ialpha + (float32_t)0.8660254039 * Ibeta; + } - /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */ - *pIb = -0.5 * Ialpha + (float32_t) 0.8660254039 *Ibeta; - - } - - /** + /** * @brief Inverse Clarke transform for Q31 version * @param[in] Ialpha input two-phase orthogonal vector axis alpha * @param[in] Ibeta input two-phase orthogonal vector axis beta @@ -5421,51 +5281,48 @@ void arm_rfft_fast_f32( * There is saturation on the subtraction, hence there is no risk of overflow. */ - static __INLINE void arm_inv_clarke_q31( - q31_t Ialpha, - q31_t Ibeta, - q31_t * pIa, - q31_t * pIb) - { - q31_t product1, product2; /* Temporary variables used to store intermediate results */ + static __INLINE void arm_inv_clarke_q31( + q31_t Ialpha, + q31_t Ibeta, + q31_t *pIa, + q31_t *pIb) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ - /* Calculating pIa from Ialpha by equation pIa = Ialpha */ - *pIa = Ialpha; + /* Calculating pIa from Ialpha by equation pIa = Ialpha */ + *pIa = Ialpha; - /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */ - product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31); + /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */ + product1 = (q31_t)(((q63_t)(Ialpha) * (0x40000000)) >> 31); - /* Intermediate product is calculated by (1/sqrt(3) * pIb) */ - product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31); + /* Intermediate product is calculated by (1/sqrt(3) * pIb) */ + product2 = (q31_t)(((q63_t)(Ibeta) * (0x6ED9EBA1)) >> 31); - /* pIb is calculated by subtracting the products */ - *pIb = __QSUB(product2, product1); + /* pIb is calculated by subtracting the products */ + *pIb = __QSUB(product2, product1); + } - } - - /** + /** * @} end of inv_clarke group */ - /** + /** * @brief Converts the elements of the Q7 vector to Q15 vector. * @param[in] *pSrc input pointer * @param[out] *pDst output pointer * @param[in] blockSize number of samples to process * @return none. */ - void arm_q7_to_q15( - q7_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_q7_to_q15( + q7_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - - - /** + /** * @ingroup groupController */ - /** + /** * @defgroup park Vector Park Transform * * Forward Park transform converts the input two-coordinate vector to flux and torque components. @@ -5489,17 +5346,17 @@ void arm_rfft_fast_f32( * Refer to the function specific documentation below for usage guidelines. */ - /** + /** * @addtogroup park * @{ */ - /** + /** * @brief Floating-point Park transform * @param[in] Ialpha input two-phase vector coordinate alpha * @param[in] Ibeta input two-phase vector coordinate beta - * @param[out] *pId points to output rotor reference frame d - * @param[out] *pIq points to output rotor reference frame q + * @param[out] *pId points to output rotor reference frame d + * @param[out] *pIq points to output rotor reference frame q * @param[in] sinVal sine value of rotation angle theta * @param[in] cosVal cosine value of rotation angle theta * @return none. @@ -5508,23 +5365,22 @@ void arm_rfft_fast_f32( * */ - static __INLINE void arm_park_f32( - float32_t Ialpha, - float32_t Ibeta, - float32_t * pId, - float32_t * pIq, - float32_t sinVal, - float32_t cosVal) - { - /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */ - *pId = Ialpha * cosVal + Ibeta * sinVal; + static __INLINE void arm_park_f32( + float32_t Ialpha, + float32_t Ibeta, + float32_t *pId, + float32_t *pIq, + float32_t sinVal, + float32_t cosVal) + { + /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */ + *pId = Ialpha * cosVal + Ibeta * sinVal; - /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */ - *pIq = -Ialpha * sinVal + Ibeta * cosVal; + /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */ + *pIq = -Ialpha * sinVal + Ibeta * cosVal; + } - } - - /** + /** * @brief Park transform for Q31 version * @param[in] Ialpha input two-phase vector coordinate alpha * @param[in] Ibeta input two-phase vector coordinate beta @@ -5541,60 +5397,57 @@ void arm_rfft_fast_f32( * There is saturation on the addition and subtraction, hence there is no risk of overflow. */ + static __INLINE void arm_park_q31( + q31_t Ialpha, + q31_t Ibeta, + q31_t *pId, + q31_t *pIq, + q31_t sinVal, + q31_t cosVal) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + q31_t product3, product4; /* Temporary variables used to store intermediate results */ - static __INLINE void arm_park_q31( - q31_t Ialpha, - q31_t Ibeta, - q31_t * pId, - q31_t * pIq, - q31_t sinVal, - q31_t cosVal) - { - q31_t product1, product2; /* Temporary variables used to store intermediate results */ - q31_t product3, product4; /* Temporary variables used to store intermediate results */ + /* Intermediate product is calculated by (Ialpha * cosVal) */ + product1 = (q31_t)(((q63_t)(Ialpha) * (cosVal)) >> 31); - /* Intermediate product is calculated by (Ialpha * cosVal) */ - product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31); + /* Intermediate product is calculated by (Ibeta * sinVal) */ + product2 = (q31_t)(((q63_t)(Ibeta) * (sinVal)) >> 31); - /* Intermediate product is calculated by (Ibeta * sinVal) */ - product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31); + /* Intermediate product is calculated by (Ialpha * sinVal) */ + product3 = (q31_t)(((q63_t)(Ialpha) * (sinVal)) >> 31); + /* Intermediate product is calculated by (Ibeta * cosVal) */ + product4 = (q31_t)(((q63_t)(Ibeta) * (cosVal)) >> 31); - /* Intermediate product is calculated by (Ialpha * sinVal) */ - product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31); + /* Calculate pId by adding the two intermediate products 1 and 2 */ + *pId = __QADD(product1, product2); - /* Intermediate product is calculated by (Ibeta * cosVal) */ - product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31); + /* Calculate pIq by subtracting the two intermediate products 3 from 4 */ + *pIq = __QSUB(product4, product3); + } - /* Calculate pId by adding the two intermediate products 1 and 2 */ - *pId = __QADD(product1, product2); - - /* Calculate pIq by subtracting the two intermediate products 3 from 4 */ - *pIq = __QSUB(product4, product3); - } - - /** + /** * @} end of park group */ - /** + /** * @brief Converts the elements of the Q7 vector to floating-point vector. * @param[in] *pSrc is input pointer * @param[out] *pDst is output pointer * @param[in] blockSize is the number of samples to process * @return none. */ - void arm_q7_to_float( - q7_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_q7_to_float( + q7_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - - /** + /** * @ingroup groupController */ - /** + /** * @defgroup inv_park Vector Inverse Park transform * Inverse Park transform converts the input flux and torque components to two-coordinate vector. * @@ -5611,12 +5464,12 @@ void arm_rfft_fast_f32( * Refer to the function specific documentation below for usage guidelines. */ - /** + /** * @addtogroup inv_park * @{ */ - /** + /** * @brief Floating-point Inverse Park transform * @param[in] Id input coordinate of rotor reference frame d * @param[in] Iq input coordinate of rotor reference frame q @@ -5627,25 +5480,23 @@ void arm_rfft_fast_f32( * @return none. */ - static __INLINE void arm_inv_park_f32( - float32_t Id, - float32_t Iq, - float32_t * pIalpha, - float32_t * pIbeta, - float32_t sinVal, - float32_t cosVal) - { - /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */ - *pIalpha = Id * cosVal - Iq * sinVal; + static __INLINE void arm_inv_park_f32( + float32_t Id, + float32_t Iq, + float32_t *pIalpha, + float32_t *pIbeta, + float32_t sinVal, + float32_t cosVal) + { + /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */ + *pIalpha = Id * cosVal - Iq * sinVal; - /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */ - *pIbeta = Id * sinVal + Iq * cosVal; + /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */ + *pIbeta = Id * sinVal + Iq * cosVal; + } - } - - - /** - * @brief Inverse Park transform for Q31 version + /** + * @brief Inverse Park transform for Q31 version * @param[in] Id input coordinate of rotor reference frame d * @param[in] Iq input coordinate of rotor reference frame q * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha @@ -5661,61 +5512,57 @@ void arm_rfft_fast_f32( * There is saturation on the addition, hence there is no risk of overflow. */ + static __INLINE void arm_inv_park_q31( + q31_t Id, + q31_t Iq, + q31_t *pIalpha, + q31_t *pIbeta, + q31_t sinVal, + q31_t cosVal) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + q31_t product3, product4; /* Temporary variables used to store intermediate results */ - static __INLINE void arm_inv_park_q31( - q31_t Id, - q31_t Iq, - q31_t * pIalpha, - q31_t * pIbeta, - q31_t sinVal, - q31_t cosVal) - { - q31_t product1, product2; /* Temporary variables used to store intermediate results */ - q31_t product3, product4; /* Temporary variables used to store intermediate results */ + /* Intermediate product is calculated by (Id * cosVal) */ + product1 = (q31_t)(((q63_t)(Id) * (cosVal)) >> 31); - /* Intermediate product is calculated by (Id * cosVal) */ - product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31); + /* Intermediate product is calculated by (Iq * sinVal) */ + product2 = (q31_t)(((q63_t)(Iq) * (sinVal)) >> 31); - /* Intermediate product is calculated by (Iq * sinVal) */ - product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31); + /* Intermediate product is calculated by (Id * sinVal) */ + product3 = (q31_t)(((q63_t)(Id) * (sinVal)) >> 31); + /* Intermediate product is calculated by (Iq * cosVal) */ + product4 = (q31_t)(((q63_t)(Iq) * (cosVal)) >> 31); - /* Intermediate product is calculated by (Id * sinVal) */ - product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31); + /* Calculate pIalpha by using the two intermediate products 1 and 2 */ + *pIalpha = __QSUB(product1, product2); - /* Intermediate product is calculated by (Iq * cosVal) */ - product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31); + /* Calculate pIbeta by using the two intermediate products 3 and 4 */ + *pIbeta = __QADD(product4, product3); + } - /* Calculate pIalpha by using the two intermediate products 1 and 2 */ - *pIalpha = __QSUB(product1, product2); - - /* Calculate pIbeta by using the two intermediate products 3 and 4 */ - *pIbeta = __QADD(product4, product3); - - } - - /** + /** * @} end of Inverse park group */ - - /** + /** * @brief Converts the elements of the Q31 vector to floating-point vector. * @param[in] *pSrc is input pointer * @param[out] *pDst is output pointer * @param[in] blockSize is the number of samples to process * @return none. */ - void arm_q31_to_float( - q31_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_q31_to_float( + q31_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - /** + /** * @ingroup groupInterpolation */ - /** + /** * @defgroup LinearInterpolate Linear Interpolation * * Linear interpolation is a method of curve fitting using linear polynomials. @@ -5747,12 +5594,12 @@ void arm_rfft_fast_f32( * if x is below input range and returns last value of table if x is above range. */ - /** + /** * @addtogroup LinearInterpolate * @{ */ - /** + /** * @brief Process function for the floating-point Linear Interpolation Function. * @param[in,out] *S is an instance of the floating-point Linear Interpolation structure * @param[in] x input sample to process @@ -5760,51 +5607,50 @@ void arm_rfft_fast_f32( * */ - static __INLINE float32_t arm_linear_interp_f32( - arm_linear_interp_instance_f32 * S, - float32_t x) - { - - float32_t y; - float32_t x0, x1; /* Nearest input values */ - float32_t y0, y1; /* Nearest output values */ - float32_t xSpacing = S->xSpacing; /* spacing between input values */ - int32_t i; /* Index variable */ - float32_t *pYData = S->pYData; /* pointer to output table */ - - /* Calculation of index */ - i = (int32_t) ((x - S->x1) / xSpacing); - - if(i < 0) + static __INLINE float32_t arm_linear_interp_f32( + arm_linear_interp_instance_f32 *S, + float32_t x) { - /* Iniatilize output for below specified range as least output value of table */ - y = pYData[0]; - } - else if((uint32_t)i >= S->nValues) - { - /* Iniatilize output for above specified range as last output value of table */ - y = pYData[S->nValues - 1]; - } - else - { - /* Calculation of nearest input values */ - x0 = S->x1 + i * xSpacing; - x1 = S->x1 + (i + 1) * xSpacing; - /* Read of nearest output values */ - y0 = pYData[i]; - y1 = pYData[i + 1]; + float32_t y; + float32_t x0, x1; /* Nearest input values */ + float32_t y0, y1; /* Nearest output values */ + float32_t xSpacing = S->xSpacing; /* spacing between input values */ + int32_t i; /* Index variable */ + float32_t *pYData = S->pYData; /* pointer to output table */ - /* Calculation of output */ - y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0)); + /* Calculation of index */ + i = (int32_t)((x - S->x1) / xSpacing); + if (i < 0) + { + /* Iniatilize output for below specified range as least output value of table */ + y = pYData[0]; + } + else if ((uint32_t)i >= S->nValues) + { + /* Iniatilize output for above specified range as last output value of table */ + y = pYData[S->nValues - 1]; + } + else + { + /* Calculation of nearest input values */ + x0 = S->x1 + i * xSpacing; + x1 = S->x1 + (i + 1) * xSpacing; + + /* Read of nearest output values */ + y0 = pYData[i]; + y1 = pYData[i + 1]; + + /* Calculation of output */ + y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0)); + } + + /* returns output value */ + return (y); } - /* returns output value */ - return (y); - } - - /** + /** * * @brief Process function for the Q31 Linear Interpolation Function. * @param[in] *pYData pointer to Q31 Linear Interpolation table @@ -5818,55 +5664,52 @@ void arm_rfft_fast_f32( * */ - - static __INLINE q31_t arm_linear_interp_q31( - q31_t * pYData, - q31_t x, - uint32_t nValues) - { - q31_t y; /* output */ - q31_t y0, y1; /* Nearest output values */ - q31_t fract; /* fractional part */ - int32_t index; /* Index to read nearest output values */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - index = ((x & 0xFFF00000) >> 20); - - if(index >= (int32_t)(nValues - 1)) - { - return (pYData[nValues - 1]); - } - else if(index < 0) - { - return (pYData[0]); - } - else + static __INLINE q31_t arm_linear_interp_q31( + q31_t *pYData, + q31_t x, + uint32_t nValues) { + q31_t y; /* output */ + q31_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + int32_t index; /* Index to read nearest output values */ - /* 20 bits for the fractional part */ - /* shift left by 11 to keep fract in 1.31 format */ - fract = (x & 0x000FFFFF) << 11; + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + index = ((x & 0xFFF00000) >> 20); - /* Read two nearest output values from the index in 1.31(q31) format */ - y0 = pYData[index]; - y1 = pYData[index + 1u]; + if (index >= (int32_t)(nValues - 1)) + { + return (pYData[nValues - 1]); + } + else if (index < 0) + { + return (pYData[0]); + } + else + { - /* Calculation of y0 * (1-fract) and y is in 2.30 format */ - y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32)); + /* 20 bits for the fractional part */ + /* shift left by 11 to keep fract in 1.31 format */ + fract = (x & 0x000FFFFF) << 11; - /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */ - y += ((q31_t) (((q63_t) y1 * fract) >> 32)); + /* Read two nearest output values from the index in 1.31(q31) format */ + y0 = pYData[index]; + y1 = pYData[index + 1u]; - /* Convert y to 1.31 format */ - return (y << 1u); + /* Calculation of y0 * (1-fract) and y is in 2.30 format */ + y = ((q31_t)((q63_t)y0 * (0x7FFFFFFF - fract) >> 32)); + /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */ + y += ((q31_t)(((q63_t)y1 * fract) >> 32)); + + /* Convert y to 1.31 format */ + return (y << 1u); + } } - } - - /** + /** * * @brief Process function for the Q15 Linear Interpolation Function. * @param[in] *pYData pointer to Q15 Linear Interpolation table @@ -5880,54 +5723,51 @@ void arm_rfft_fast_f32( * */ - - static __INLINE q15_t arm_linear_interp_q15( - q15_t * pYData, - q31_t x, - uint32_t nValues) - { - q63_t y; /* output */ - q15_t y0, y1; /* Nearest output values */ - q31_t fract; /* fractional part */ - int32_t index; /* Index to read nearest output values */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - index = ((x & 0xFFF00000) >> 20u); - - if(index >= (int32_t)(nValues - 1)) + static __INLINE q15_t arm_linear_interp_q15( + q15_t *pYData, + q31_t x, + uint32_t nValues) { - return (pYData[nValues - 1]); - } - else if(index < 0) - { - return (pYData[0]); - } - else - { - /* 20 bits for the fractional part */ - /* fract is in 12.20 format */ - fract = (x & 0x000FFFFF); + q63_t y; /* output */ + q15_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + int32_t index; /* Index to read nearest output values */ - /* Read two nearest output values from the index */ - y0 = pYData[index]; - y1 = pYData[index + 1u]; + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + index = ((x & 0xFFF00000) >> 20u); - /* Calculation of y0 * (1-fract) and y is in 13.35 format */ - y = ((q63_t) y0 * (0xFFFFF - fract)); + if (index >= (int32_t)(nValues - 1)) + { + return (pYData[nValues - 1]); + } + else if (index < 0) + { + return (pYData[0]); + } + else + { + /* 20 bits for the fractional part */ + /* fract is in 12.20 format */ + fract = (x & 0x000FFFFF); - /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */ - y += ((q63_t) y1 * (fract)); + /* Read two nearest output values from the index */ + y0 = pYData[index]; + y1 = pYData[index + 1u]; - /* convert y to 1.15 format */ - return (y >> 20); + /* Calculation of y0 * (1-fract) and y is in 13.35 format */ + y = ((q63_t)y0 * (0xFFFFF - fract)); + + /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */ + y += ((q63_t)y1 * (fract)); + + /* convert y to 1.15 format */ + return (y >> 20); + } } - - } - - /** + /** * * @brief Process function for the Q7 Linear Interpolation Function. * @param[in] *pYData pointer to Q7 Linear Interpolation table @@ -5940,119 +5780,113 @@ void arm_rfft_fast_f32( * This function can support maximum of table size 2^12. */ - - static __INLINE q7_t arm_linear_interp_q7( - q7_t * pYData, - q31_t x, - uint32_t nValues) - { - q31_t y; /* output */ - q7_t y0, y1; /* Nearest output values */ - q31_t fract; /* fractional part */ - uint32_t index; /* Index to read nearest output values */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - if (x < 0) + static __INLINE q7_t arm_linear_interp_q7( + q7_t *pYData, + q31_t x, + uint32_t nValues) { - return (pYData[0]); + q31_t y; /* output */ + q7_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + uint32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + if (x < 0) + { + return (pYData[0]); + } + index = (x >> 20) & 0xfff; + + if (index >= (nValues - 1)) + { + return (pYData[nValues - 1]); + } + else + { + + /* 20 bits for the fractional part */ + /* fract is in 12.20 format */ + fract = (x & 0x000FFFFF); + + /* Read two nearest output values from the index and are in 1.7(q7) format */ + y0 = pYData[index]; + y1 = pYData[index + 1u]; + + /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */ + y = ((y0 * (0xFFFFF - fract))); + + /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */ + y += (y1 * fract); + + /* convert y to 1.7(q7) format */ + return (y >> 20u); + } } - index = (x >> 20) & 0xfff; - - - if(index >= (nValues - 1)) - { - return (pYData[nValues - 1]); - } - else - { - - /* 20 bits for the fractional part */ - /* fract is in 12.20 format */ - fract = (x & 0x000FFFFF); - - /* Read two nearest output values from the index and are in 1.7(q7) format */ - y0 = pYData[index]; - y1 = pYData[index + 1u]; - - /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */ - y = ((y0 * (0xFFFFF - fract))); - - /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */ - y += (y1 * fract); - - /* convert y to 1.7(q7) format */ - return (y >> 20u); - - } - - } - /** + /** * @} end of LinearInterpolate group */ - /** + /** * @brief Fast approximation to the trigonometric sine function for floating-point data. * @param[in] x input value in radians. * @return sin(x). */ - float32_t arm_sin_f32( - float32_t x); + float32_t arm_sin_f32( + float32_t x); - /** + /** * @brief Fast approximation to the trigonometric sine function for Q31 data. * @param[in] x Scaled input value in radians. * @return sin(x). */ - q31_t arm_sin_q31( - q31_t x); + q31_t arm_sin_q31( + q31_t x); - /** + /** * @brief Fast approximation to the trigonometric sine function for Q15 data. * @param[in] x Scaled input value in radians. * @return sin(x). */ - q15_t arm_sin_q15( - q15_t x); + q15_t arm_sin_q15( + q15_t x); - /** + /** * @brief Fast approximation to the trigonometric cosine function for floating-point data. * @param[in] x input value in radians. * @return cos(x). */ - float32_t arm_cos_f32( - float32_t x); + float32_t arm_cos_f32( + float32_t x); - /** + /** * @brief Fast approximation to the trigonometric cosine function for Q31 data. * @param[in] x Scaled input value in radians. * @return cos(x). */ - q31_t arm_cos_q31( - q31_t x); + q31_t arm_cos_q31( + q31_t x); - /** + /** * @brief Fast approximation to the trigonometric cosine function for Q15 data. * @param[in] x Scaled input value in radians. * @return cos(x). */ - q15_t arm_cos_q15( - q15_t x); + q15_t arm_cos_q15( + q15_t x); - - /** + /** * @ingroup groupFastMath */ - - /** + /** * @defgroup SQRT Square Root * * Computes the square root of a number. @@ -6072,13 +5906,12 @@ void arm_rfft_fast_f32( * */ - - /** + /** * @addtogroup SQRT * @{ */ - /** + /** * @brief Floating-point square root function. * @param[in] in input value. * @param[out] *pOut square root of input value. @@ -6086,367 +5919,352 @@ void arm_rfft_fast_f32( * in is negative value and returns zero output for negative values. */ - static __INLINE arm_status arm_sqrt_f32( - float32_t in, - float32_t * pOut) - { - if(in > 0) + static __INLINE arm_status arm_sqrt_f32( + float32_t in, + float32_t *pOut) { + if (in > 0) + { // #if __FPU_USED -#if (__FPU_USED == 1) && defined ( __CC_ARM ) - *pOut = __sqrtf(in); +#if (__FPU_USED == 1) && defined(__CC_ARM) + *pOut = __sqrtf(in); #else - *pOut = sqrtf(in); + *pOut = sqrtf(in); #endif - return (ARM_MATH_SUCCESS); - } - else - { - *pOut = 0.0f; - return (ARM_MATH_ARGUMENT_ERROR); + return (ARM_MATH_SUCCESS); + } + else + { + *pOut = 0.0f; + return (ARM_MATH_ARGUMENT_ERROR); + } } - } - - - /** + /** * @brief Q31 square root function. * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF. * @param[out] *pOut square root of input value. * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if * in is negative value and returns zero output for negative values. */ - arm_status arm_sqrt_q31( - q31_t in, - q31_t * pOut); + arm_status arm_sqrt_q31( + q31_t in, + q31_t *pOut); - /** + /** * @brief Q15 square root function. * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF. * @param[out] *pOut square root of input value. * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if * in is negative value and returns zero output for negative values. */ - arm_status arm_sqrt_q15( - q15_t in, - q15_t * pOut); + arm_status arm_sqrt_q15( + q15_t in, + q15_t *pOut); - /** + /** * @} end of SQRT group */ - - - - - - /** + /** * @brief floating-point Circular write function. */ - static __INLINE void arm_circularWrite_f32( - int32_t * circBuffer, - int32_t L, - uint16_t * writeOffset, - int32_t bufferInc, - const int32_t * src, - int32_t srcInc, - uint32_t blockSize) - { - uint32_t i = 0u; - int32_t wOffset; - - /* Copy the value of Index pointer that points - * to the current location where the input samples to be copied */ - wOffset = *writeOffset; - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) + static __INLINE void arm_circularWrite_f32( + int32_t *circBuffer, + int32_t L, + uint16_t *writeOffset, + int32_t bufferInc, + const int32_t *src, + int32_t srcInc, + uint32_t blockSize) { - /* copy the input sample to the circular buffer */ - circBuffer[wOffset] = *src; + uint32_t i = 0u; + int32_t wOffset; - /* Update the input pointer */ - src += srcInc; + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; - /* Circularly update wOffset. Watch out for positive and negative value */ - wOffset += bufferInc; - if(wOffset >= L) - wOffset -= L; + /* Loop over the blockSize */ + i = blockSize; - /* Decrement the loop counter */ - i--; + while (i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if (wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = wOffset; } - /* Update the index pointer */ - *writeOffset = wOffset; - } - - - - /** + /** * @brief floating-point Circular Read function. */ - static __INLINE void arm_circularRead_f32( - int32_t * circBuffer, - int32_t L, - int32_t * readOffset, - int32_t bufferInc, - int32_t * dst, - int32_t * dst_base, - int32_t dst_length, - int32_t dstInc, - uint32_t blockSize) - { - uint32_t i = 0u; - int32_t rOffset, dst_end; - - /* Copy the value of Index pointer that points - * to the current location from where the input samples to be read */ - rOffset = *readOffset; - dst_end = (int32_t) (dst_base + dst_length); - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) + static __INLINE void arm_circularRead_f32( + int32_t *circBuffer, + int32_t L, + int32_t *readOffset, + int32_t bufferInc, + int32_t *dst, + int32_t *dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) { - /* copy the sample from the circular buffer to the destination buffer */ - *dst = circBuffer[rOffset]; + uint32_t i = 0u; + int32_t rOffset, dst_end; - /* Update the input pointer */ - dst += dstInc; + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + dst_end = (int32_t)(dst_base + dst_length); - if(dst == (int32_t *) dst_end) - { - dst = dst_base; - } + /* Loop over the blockSize */ + i = blockSize; - /* Circularly update rOffset. Watch out for positive and negative value */ - rOffset += bufferInc; + while (i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; - if(rOffset >= L) - { - rOffset -= L; - } + /* Update the input pointer */ + dst += dstInc; - /* Decrement the loop counter */ - i--; + if (dst == (int32_t *)dst_end) + { + dst = dst_base; + } + + /* Circularly update rOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if (rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; } - /* Update the index pointer */ - *readOffset = rOffset; - } - - /** + /** * @brief Q15 Circular write function. */ - static __INLINE void arm_circularWrite_q15( - q15_t * circBuffer, - int32_t L, - uint16_t * writeOffset, - int32_t bufferInc, - const q15_t * src, - int32_t srcInc, - uint32_t blockSize) - { - uint32_t i = 0u; - int32_t wOffset; - - /* Copy the value of Index pointer that points - * to the current location where the input samples to be copied */ - wOffset = *writeOffset; - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) + static __INLINE void arm_circularWrite_q15( + q15_t *circBuffer, + int32_t L, + uint16_t *writeOffset, + int32_t bufferInc, + const q15_t *src, + int32_t srcInc, + uint32_t blockSize) { - /* copy the input sample to the circular buffer */ - circBuffer[wOffset] = *src; + uint32_t i = 0u; + int32_t wOffset; - /* Update the input pointer */ - src += srcInc; + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; - /* Circularly update wOffset. Watch out for positive and negative value */ - wOffset += bufferInc; - if(wOffset >= L) - wOffset -= L; + /* Loop over the blockSize */ + i = blockSize; - /* Decrement the loop counter */ - i--; + while (i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if (wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = wOffset; } - /* Update the index pointer */ - *writeOffset = wOffset; - } - - - - /** + /** * @brief Q15 Circular Read function. */ - static __INLINE void arm_circularRead_q15( - q15_t * circBuffer, - int32_t L, - int32_t * readOffset, - int32_t bufferInc, - q15_t * dst, - q15_t * dst_base, - int32_t dst_length, - int32_t dstInc, - uint32_t blockSize) - { - uint32_t i = 0; - int32_t rOffset, dst_end; - - /* Copy the value of Index pointer that points - * to the current location from where the input samples to be read */ - rOffset = *readOffset; - - dst_end = (int32_t) (dst_base + dst_length); - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) + static __INLINE void arm_circularRead_q15( + q15_t *circBuffer, + int32_t L, + int32_t *readOffset, + int32_t bufferInc, + q15_t *dst, + q15_t *dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) { - /* copy the sample from the circular buffer to the destination buffer */ - *dst = circBuffer[rOffset]; + uint32_t i = 0; + int32_t rOffset, dst_end; - /* Update the input pointer */ - dst += dstInc; + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; - if(dst == (q15_t *) dst_end) - { - dst = dst_base; - } + dst_end = (int32_t)(dst_base + dst_length); - /* Circularly update wOffset. Watch out for positive and negative value */ - rOffset += bufferInc; + /* Loop over the blockSize */ + i = blockSize; - if(rOffset >= L) - { - rOffset -= L; - } + while (i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; - /* Decrement the loop counter */ - i--; + /* Update the input pointer */ + dst += dstInc; + + if (dst == (q15_t *)dst_end) + { + dst = dst_base; + } + + /* Circularly update wOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if (rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; } - /* Update the index pointer */ - *readOffset = rOffset; - } - - - /** + /** * @brief Q7 Circular write function. */ - static __INLINE void arm_circularWrite_q7( - q7_t * circBuffer, - int32_t L, - uint16_t * writeOffset, - int32_t bufferInc, - const q7_t * src, - int32_t srcInc, - uint32_t blockSize) - { - uint32_t i = 0u; - int32_t wOffset; - - /* Copy the value of Index pointer that points - * to the current location where the input samples to be copied */ - wOffset = *writeOffset; - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) + static __INLINE void arm_circularWrite_q7( + q7_t *circBuffer, + int32_t L, + uint16_t *writeOffset, + int32_t bufferInc, + const q7_t *src, + int32_t srcInc, + uint32_t blockSize) { - /* copy the input sample to the circular buffer */ - circBuffer[wOffset] = *src; + uint32_t i = 0u; + int32_t wOffset; - /* Update the input pointer */ - src += srcInc; + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; - /* Circularly update wOffset. Watch out for positive and negative value */ - wOffset += bufferInc; - if(wOffset >= L) - wOffset -= L; + /* Loop over the blockSize */ + i = blockSize; - /* Decrement the loop counter */ - i--; + while (i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if (wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = wOffset; } - /* Update the index pointer */ - *writeOffset = wOffset; - } - - - - /** + /** * @brief Q7 Circular Read function. */ - static __INLINE void arm_circularRead_q7( - q7_t * circBuffer, - int32_t L, - int32_t * readOffset, - int32_t bufferInc, - q7_t * dst, - q7_t * dst_base, - int32_t dst_length, - int32_t dstInc, - uint32_t blockSize) - { - uint32_t i = 0; - int32_t rOffset, dst_end; - - /* Copy the value of Index pointer that points - * to the current location from where the input samples to be read */ - rOffset = *readOffset; - - dst_end = (int32_t) (dst_base + dst_length); - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) + static __INLINE void arm_circularRead_q7( + q7_t *circBuffer, + int32_t L, + int32_t *readOffset, + int32_t bufferInc, + q7_t *dst, + q7_t *dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) { - /* copy the sample from the circular buffer to the destination buffer */ - *dst = circBuffer[rOffset]; + uint32_t i = 0; + int32_t rOffset, dst_end; - /* Update the input pointer */ - dst += dstInc; + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; - if(dst == (q7_t *) dst_end) - { - dst = dst_base; - } + dst_end = (int32_t)(dst_base + dst_length); - /* Circularly update rOffset. Watch out for positive and negative value */ - rOffset += bufferInc; + /* Loop over the blockSize */ + i = blockSize; - if(rOffset >= L) - { - rOffset -= L; - } + while (i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; - /* Decrement the loop counter */ - i--; + /* Update the input pointer */ + dst += dstInc; + + if (dst == (q7_t *)dst_end) + { + dst = dst_base; + } + + /* Circularly update rOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if (rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; } - /* Update the index pointer */ - *readOffset = rOffset; - } - - - /** + /** * @brief Sum of the squares of the elements of a Q31 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6454,12 +6272,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_power_q31( - q31_t * pSrc, - uint32_t blockSize, - q63_t * pResult); + void arm_power_q31( + q31_t *pSrc, + uint32_t blockSize, + q63_t *pResult); - /** + /** * @brief Sum of the squares of the elements of a floating-point vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6467,12 +6285,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_power_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); + void arm_power_f32( + float32_t *pSrc, + uint32_t blockSize, + float32_t *pResult); - /** + /** * @brief Sum of the squares of the elements of a Q15 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6480,12 +6298,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_power_q15( - q15_t * pSrc, - uint32_t blockSize, - q63_t * pResult); + void arm_power_q15( + q15_t *pSrc, + uint32_t blockSize, + q63_t *pResult); - /** + /** * @brief Sum of the squares of the elements of a Q7 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6493,12 +6311,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_power_q7( - q7_t * pSrc, - uint32_t blockSize, - q31_t * pResult); + void arm_power_q7( + q7_t *pSrc, + uint32_t blockSize, + q31_t *pResult); - /** + /** * @brief Mean value of a Q7 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6506,48 +6324,48 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_mean_q7( - q7_t * pSrc, - uint32_t blockSize, - q7_t * pResult); + void arm_mean_q7( + q7_t *pSrc, + uint32_t blockSize, + q7_t *pResult); - /** + /** * @brief Mean value of a Q15 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process * @param[out] *pResult is output value. * @return none. */ - void arm_mean_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult); + void arm_mean_q15( + q15_t *pSrc, + uint32_t blockSize, + q15_t *pResult); - /** + /** * @brief Mean value of a Q31 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process * @param[out] *pResult is output value. * @return none. */ - void arm_mean_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult); + void arm_mean_q31( + q31_t *pSrc, + uint32_t blockSize, + q31_t *pResult); - /** + /** * @brief Mean value of a floating-point vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process * @param[out] *pResult is output value. * @return none. */ - void arm_mean_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); + void arm_mean_f32( + float32_t *pSrc, + uint32_t blockSize, + float32_t *pResult); - /** + /** * @brief Variance of the elements of a floating-point vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6555,12 +6373,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_var_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); + void arm_var_f32( + float32_t *pSrc, + uint32_t blockSize, + float32_t *pResult); - /** + /** * @brief Variance of the elements of a Q31 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6568,12 +6386,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_var_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult); + void arm_var_q31( + q31_t *pSrc, + uint32_t blockSize, + q31_t *pResult); - /** + /** * @brief Variance of the elements of a Q15 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6581,12 +6399,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_var_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult); + void arm_var_q15( + q15_t *pSrc, + uint32_t blockSize, + q15_t *pResult); - /** + /** * @brief Root Mean Square of the elements of a floating-point vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6594,12 +6412,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_rms_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); + void arm_rms_f32( + float32_t *pSrc, + uint32_t blockSize, + float32_t *pResult); - /** + /** * @brief Root Mean Square of the elements of a Q31 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6607,12 +6425,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_rms_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult); + void arm_rms_q31( + q31_t *pSrc, + uint32_t blockSize, + q31_t *pResult); - /** + /** * @brief Root Mean Square of the elements of a Q15 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6620,12 +6438,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_rms_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult); + void arm_rms_q15( + q15_t *pSrc, + uint32_t blockSize, + q15_t *pResult); - /** + /** * @brief Standard deviation of the elements of a floating-point vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6633,12 +6451,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_std_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); + void arm_std_f32( + float32_t *pSrc, + uint32_t blockSize, + float32_t *pResult); - /** + /** * @brief Standard deviation of the elements of a Q31 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6646,12 +6464,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_std_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult); + void arm_std_q31( + q31_t *pSrc, + uint32_t blockSize, + q31_t *pResult); - /** + /** * @brief Standard deviation of the elements of a Q15 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6659,12 +6477,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_std_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult); + void arm_std_q15( + q15_t *pSrc, + uint32_t blockSize, + q15_t *pResult); - /** + /** * @brief Floating-point complex magnitude * @param[in] *pSrc points to the complex input vector * @param[out] *pDst points to the real output vector @@ -6672,12 +6490,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mag_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t numSamples); + void arm_cmplx_mag_f32( + float32_t *pSrc, + float32_t *pDst, + uint32_t numSamples); - /** + /** * @brief Q31 complex magnitude * @param[in] *pSrc points to the complex input vector * @param[out] *pDst points to the real output vector @@ -6685,12 +6503,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mag_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t numSamples); + void arm_cmplx_mag_q31( + q31_t *pSrc, + q31_t *pDst, + uint32_t numSamples); - /** + /** * @brief Q15 complex magnitude * @param[in] *pSrc points to the complex input vector * @param[out] *pDst points to the real output vector @@ -6698,12 +6516,12 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mag_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t numSamples); + void arm_cmplx_mag_q15( + q15_t *pSrc, + q15_t *pDst, + uint32_t numSamples); - /** + /** * @brief Q15 complex dot product * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -6713,14 +6531,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_dot_prod_q15( - q15_t * pSrcA, - q15_t * pSrcB, - uint32_t numSamples, - q31_t * realResult, - q31_t * imagResult); + void arm_cmplx_dot_prod_q15( + q15_t *pSrcA, + q15_t *pSrcB, + uint32_t numSamples, + q31_t *realResult, + q31_t *imagResult); - /** + /** * @brief Q31 complex dot product * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -6730,14 +6548,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_dot_prod_q31( - q31_t * pSrcA, - q31_t * pSrcB, - uint32_t numSamples, - q63_t * realResult, - q63_t * imagResult); + void arm_cmplx_dot_prod_q31( + q31_t *pSrcA, + q31_t *pSrcB, + uint32_t numSamples, + q63_t *realResult, + q63_t *imagResult); - /** + /** * @brief Floating-point complex dot product * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -6747,14 +6565,14 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_dot_prod_f32( - float32_t * pSrcA, - float32_t * pSrcB, - uint32_t numSamples, - float32_t * realResult, - float32_t * imagResult); + void arm_cmplx_dot_prod_f32( + float32_t *pSrcA, + float32_t *pSrcB, + uint32_t numSamples, + float32_t *realResult, + float32_t *imagResult); - /** + /** * @brief Q15 complex-by-real multiplication * @param[in] *pSrcCmplx points to the complex input vector * @param[in] *pSrcReal points to the real input vector @@ -6763,13 +6581,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mult_real_q15( - q15_t * pSrcCmplx, - q15_t * pSrcReal, - q15_t * pCmplxDst, - uint32_t numSamples); + void arm_cmplx_mult_real_q15( + q15_t *pSrcCmplx, + q15_t *pSrcReal, + q15_t *pCmplxDst, + uint32_t numSamples); - /** + /** * @brief Q31 complex-by-real multiplication * @param[in] *pSrcCmplx points to the complex input vector * @param[in] *pSrcReal points to the real input vector @@ -6778,13 +6596,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mult_real_q31( - q31_t * pSrcCmplx, - q31_t * pSrcReal, - q31_t * pCmplxDst, - uint32_t numSamples); + void arm_cmplx_mult_real_q31( + q31_t *pSrcCmplx, + q31_t *pSrcReal, + q31_t *pCmplxDst, + uint32_t numSamples); - /** + /** * @brief Floating-point complex-by-real multiplication * @param[in] *pSrcCmplx points to the complex input vector * @param[in] *pSrcReal points to the real input vector @@ -6793,13 +6611,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mult_real_f32( - float32_t * pSrcCmplx, - float32_t * pSrcReal, - float32_t * pCmplxDst, - uint32_t numSamples); + void arm_cmplx_mult_real_f32( + float32_t *pSrcCmplx, + float32_t *pSrcReal, + float32_t *pCmplxDst, + uint32_t numSamples); - /** + /** * @brief Minimum value of a Q7 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6808,13 +6626,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_min_q7( - q7_t * pSrc, - uint32_t blockSize, - q7_t * result, - uint32_t * index); + void arm_min_q7( + q7_t *pSrc, + uint32_t blockSize, + q7_t *result, + uint32_t *index); - /** + /** * @brief Minimum value of a Q15 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6823,13 +6641,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_min_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult, - uint32_t * pIndex); + void arm_min_q15( + q15_t *pSrc, + uint32_t blockSize, + q15_t *pResult, + uint32_t *pIndex); - /** + /** * @brief Minimum value of a Q31 vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6837,13 +6655,13 @@ void arm_rfft_fast_f32( * @param[out] *pIndex is the array index of the minimum value in the input buffer. * @return none. */ - void arm_min_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult, - uint32_t * pIndex); + void arm_min_q31( + q31_t *pSrc, + uint32_t blockSize, + q31_t *pResult, + uint32_t *pIndex); - /** + /** * @brief Minimum value of a floating-point vector. * @param[in] *pSrc is input pointer * @param[in] blockSize is the number of samples to process @@ -6852,13 +6670,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_min_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult, - uint32_t * pIndex); + void arm_min_f32( + float32_t *pSrc, + uint32_t blockSize, + float32_t *pResult, + uint32_t *pIndex); -/** + /** * @brief Maximum value of a Q7 vector. * @param[in] *pSrc points to the input buffer * @param[in] blockSize length of the input vector @@ -6867,13 +6685,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_max_q7( - q7_t * pSrc, - uint32_t blockSize, - q7_t * pResult, - uint32_t * pIndex); + void arm_max_q7( + q7_t *pSrc, + uint32_t blockSize, + q7_t *pResult, + uint32_t *pIndex); -/** + /** * @brief Maximum value of a Q15 vector. * @param[in] *pSrc points to the input buffer * @param[in] blockSize length of the input vector @@ -6882,13 +6700,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_max_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult, - uint32_t * pIndex); + void arm_max_q15( + q15_t *pSrc, + uint32_t blockSize, + q15_t *pResult, + uint32_t *pIndex); -/** + /** * @brief Maximum value of a Q31 vector. * @param[in] *pSrc points to the input buffer * @param[in] blockSize length of the input vector @@ -6897,13 +6715,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_max_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult, - uint32_t * pIndex); + void arm_max_q31( + q31_t *pSrc, + uint32_t blockSize, + q31_t *pResult, + uint32_t *pIndex); -/** + /** * @brief Maximum value of a floating-point vector. * @param[in] *pSrc points to the input buffer * @param[in] blockSize length of the input vector @@ -6912,13 +6730,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_max_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult, - uint32_t * pIndex); + void arm_max_f32( + float32_t *pSrc, + uint32_t blockSize, + float32_t *pResult, + uint32_t *pIndex); - /** + /** * @brief Q15 complex-by-complex multiplication * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -6927,13 +6745,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mult_cmplx_q15( - q15_t * pSrcA, - q15_t * pSrcB, - q15_t * pDst, - uint32_t numSamples); + void arm_cmplx_mult_cmplx_q15( + q15_t *pSrcA, + q15_t *pSrcB, + q15_t *pDst, + uint32_t numSamples); - /** + /** * @brief Q31 complex-by-complex multiplication * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -6942,13 +6760,13 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mult_cmplx_q31( - q31_t * pSrcA, - q31_t * pSrcB, - q31_t * pDst, - uint32_t numSamples); + void arm_cmplx_mult_cmplx_q31( + q31_t *pSrcA, + q31_t *pSrcB, + q31_t *pDst, + uint32_t numSamples); - /** + /** * @brief Floating-point complex-by-complex multiplication * @param[in] *pSrcA points to the first input vector * @param[in] *pSrcB points to the second input vector @@ -6957,117 +6775,113 @@ void arm_rfft_fast_f32( * @return none. */ - void arm_cmplx_mult_cmplx_f32( - float32_t * pSrcA, - float32_t * pSrcB, - float32_t * pDst, - uint32_t numSamples); + void arm_cmplx_mult_cmplx_f32( + float32_t *pSrcA, + float32_t *pSrcB, + float32_t *pDst, + uint32_t numSamples); - /** + /** * @brief Converts the elements of the floating-point vector to Q31 vector. * @param[in] *pSrc points to the floating-point input vector * @param[out] *pDst points to the Q31 output vector * @param[in] blockSize length of the input vector * @return none. */ - void arm_float_to_q31( - float32_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_float_to_q31( + float32_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - /** + /** * @brief Converts the elements of the floating-point vector to Q15 vector. * @param[in] *pSrc points to the floating-point input vector * @param[out] *pDst points to the Q15 output vector * @param[in] blockSize length of the input vector * @return none */ - void arm_float_to_q15( - float32_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_float_to_q15( + float32_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Converts the elements of the floating-point vector to Q7 vector. * @param[in] *pSrc points to the floating-point input vector * @param[out] *pDst points to the Q7 output vector * @param[in] blockSize length of the input vector * @return none */ - void arm_float_to_q7( - float32_t * pSrc, - q7_t * pDst, - uint32_t blockSize); + void arm_float_to_q7( + float32_t *pSrc, + q7_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Converts the elements of the Q31 vector to Q15 vector. * @param[in] *pSrc is input pointer * @param[out] *pDst is output pointer * @param[in] blockSize is the number of samples to process * @return none. */ - void arm_q31_to_q15( - q31_t * pSrc, - q15_t * pDst, - uint32_t blockSize); + void arm_q31_to_q15( + q31_t *pSrc, + q15_t *pDst, + uint32_t blockSize); - /** + /** * @brief Converts the elements of the Q31 vector to Q7 vector. * @param[in] *pSrc is input pointer * @param[out] *pDst is output pointer * @param[in] blockSize is the number of samples to process * @return none. */ - void arm_q31_to_q7( - q31_t * pSrc, - q7_t * pDst, - uint32_t blockSize); + void arm_q31_to_q7( + q31_t *pSrc, + q7_t *pDst, + uint32_t blockSize); - /** + /** * @brief Converts the elements of the Q15 vector to floating-point vector. * @param[in] *pSrc is input pointer * @param[out] *pDst is output pointer * @param[in] blockSize is the number of samples to process * @return none. */ - void arm_q15_to_float( - q15_t * pSrc, - float32_t * pDst, - uint32_t blockSize); + void arm_q15_to_float( + q15_t *pSrc, + float32_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Converts the elements of the Q15 vector to Q31 vector. * @param[in] *pSrc is input pointer * @param[out] *pDst is output pointer * @param[in] blockSize is the number of samples to process * @return none. */ - void arm_q15_to_q31( - q15_t * pSrc, - q31_t * pDst, - uint32_t blockSize); + void arm_q15_to_q31( + q15_t *pSrc, + q31_t *pDst, + uint32_t blockSize); - - /** + /** * @brief Converts the elements of the Q15 vector to Q7 vector. * @param[in] *pSrc is input pointer * @param[out] *pDst is output pointer * @param[in] blockSize is the number of samples to process * @return none. */ - void arm_q15_to_q7( - q15_t * pSrc, - q7_t * pDst, - uint32_t blockSize); + void arm_q15_to_q7( + q15_t *pSrc, + q7_t *pDst, + uint32_t blockSize); - - /** + /** * @ingroup groupInterpolation */ - /** + /** * @defgroup BilinearInterpolate Bilinear Interpolation * * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid. @@ -7119,12 +6933,12 @@ void arm_rfft_fast_f32( * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output. */ - /** + /** * @addtogroup BilinearInterpolate * @{ */ - /** + /** * * @brief Floating-point bilinear interpolation. * @param[in,out] *S points to an instance of the interpolation structure. @@ -7133,67 +6947,62 @@ void arm_rfft_fast_f32( * @return out interpolated value. */ - - static __INLINE float32_t arm_bilinear_interp_f32( - const arm_bilinear_interp_instance_f32 * S, - float32_t X, - float32_t Y) - { - float32_t out; - float32_t f00, f01, f10, f11; - float32_t *pData = S->pData; - int32_t xIndex, yIndex, index; - float32_t xdiff, ydiff; - float32_t b1, b2, b3, b4; - - xIndex = (int32_t) X; - yIndex = (int32_t) Y; - - /* Care taken for table outside boundary */ - /* Returns zero output when values are outside table boundary */ - if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 - || yIndex > (S->numCols - 1)) + static __INLINE float32_t arm_bilinear_interp_f32( + const arm_bilinear_interp_instance_f32 *S, + float32_t X, + float32_t Y) { - return (0); + float32_t out; + float32_t f00, f01, f10, f11; + float32_t *pData = S->pData; + int32_t xIndex, yIndex, index; + float32_t xdiff, ydiff; + float32_t b1, b2, b3, b4; + + xIndex = (int32_t)X; + yIndex = (int32_t)Y; + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if (xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 || yIndex > (S->numCols - 1)) + { + return (0); + } + + /* Calculation of index for two nearest points in X-direction */ + index = (xIndex - 1) + (yIndex - 1) * S->numCols; + + /* Read two nearest points in X-direction */ + f00 = pData[index]; + f01 = pData[index + 1]; + + /* Calculation of index for two nearest points in Y-direction */ + index = (xIndex - 1) + (yIndex)*S->numCols; + + /* Read two nearest points in Y-direction */ + f10 = pData[index]; + f11 = pData[index + 1]; + + /* Calculation of intermediate values */ + b1 = f00; + b2 = f01 - f00; + b3 = f10 - f00; + b4 = f00 - f01 - f10 + f11; + + /* Calculation of fractional part in X */ + xdiff = X - xIndex; + + /* Calculation of fractional part in Y */ + ydiff = Y - yIndex; + + /* Calculation of bi-linear interpolated output */ + out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff; + + /* return to application */ + return (out); } - /* Calculation of index for two nearest points in X-direction */ - index = (xIndex - 1) + (yIndex - 1) * S->numCols; - - - /* Read two nearest points in X-direction */ - f00 = pData[index]; - f01 = pData[index + 1]; - - /* Calculation of index for two nearest points in Y-direction */ - index = (xIndex - 1) + (yIndex) * S->numCols; - - - /* Read two nearest points in Y-direction */ - f10 = pData[index]; - f11 = pData[index + 1]; - - /* Calculation of intermediate values */ - b1 = f00; - b2 = f01 - f00; - b3 = f10 - f00; - b4 = f00 - f01 - f10 + f11; - - /* Calculation of fractional part in X */ - xdiff = X - xIndex; - - /* Calculation of fractional part in Y */ - ydiff = Y - yIndex; - - /* Calculation of bi-linear interpolated output */ - out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff; - - /* return to application */ - return (out); - - } - - /** + /** * * @brief Q31 bilinear interpolation. * @param[in,out] *S points to an instance of the interpolation structure. @@ -7202,75 +7011,73 @@ void arm_rfft_fast_f32( * @return out interpolated value. */ - static __INLINE q31_t arm_bilinear_interp_q31( - arm_bilinear_interp_instance_q31 * S, - q31_t X, - q31_t Y) - { - q31_t out; /* Temporary output */ - q31_t acc = 0; /* output */ - q31_t xfract, yfract; /* X, Y fractional parts */ - q31_t x1, x2, y1, y2; /* Nearest output values */ - int32_t rI, cI; /* Row and column indices */ - q31_t *pYData = S->pData; /* pointer to output table values */ - uint32_t nCols = S->numCols; /* num of rows */ - - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - rI = ((X & 0xFFF00000) >> 20u); - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - cI = ((Y & 0xFFF00000) >> 20u); - - /* Care taken for table outside boundary */ - /* Returns zero output when values are outside table boundary */ - if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + static __INLINE q31_t arm_bilinear_interp_q31( + arm_bilinear_interp_instance_q31 *S, + q31_t X, + q31_t Y) { - return (0); + q31_t out; /* Temporary output */ + q31_t acc = 0; /* output */ + q31_t xfract, yfract; /* X, Y fractional parts */ + q31_t x1, x2, y1, y2; /* Nearest output values */ + int32_t rI, cI; /* Row and column indices */ + q31_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & 0xFFF00000) >> 20u); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & 0xFFF00000) >> 20u); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if (rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + { + return (0); + } + + /* 20 bits for the fractional part */ + /* shift left xfract by 11 to keep 1.31 format */ + xfract = (X & 0x000FFFFF) << 11u; + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + nCols * (cI)]; + x2 = pYData[(rI) + nCols * (cI) + 1u]; + + /* 20 bits for the fractional part */ + /* shift left yfract by 11 to keep 1.31 format */ + yfract = (Y & 0x000FFFFF) << 11u; + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + nCols * (cI + 1)]; + y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */ + out = ((q31_t)(((q63_t)x1 * (0x7FFFFFFF - xfract)) >> 32)); + acc = ((q31_t)(((q63_t)out * (0x7FFFFFFF - yfract)) >> 32)); + + /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t)((q63_t)x2 * (0x7FFFFFFF - yfract) >> 32)); + acc += ((q31_t)((q63_t)out * (xfract) >> 32)); + + /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t)((q63_t)y1 * (0x7FFFFFFF - xfract) >> 32)); + acc += ((q31_t)((q63_t)out * (yfract) >> 32)); + + /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t)((q63_t)y2 * (xfract) >> 32)); + acc += ((q31_t)((q63_t)out * (yfract) >> 32)); + + /* Convert acc to 1.31(q31) format */ + return (acc << 2u); } - /* 20 bits for the fractional part */ - /* shift left xfract by 11 to keep 1.31 format */ - xfract = (X & 0x000FFFFF) << 11u; - - /* Read two nearest output values from the index */ - x1 = pYData[(rI) + nCols * (cI)]; - x2 = pYData[(rI) + nCols * (cI) + 1u]; - - /* 20 bits for the fractional part */ - /* shift left yfract by 11 to keep 1.31 format */ - yfract = (Y & 0x000FFFFF) << 11u; - - /* Read two nearest output values from the index */ - y1 = pYData[(rI) + nCols * (cI + 1)]; - y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; - - /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */ - out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32)); - acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32)); - - /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */ - out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32)); - acc += ((q31_t) ((q63_t) out * (xfract) >> 32)); - - /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */ - out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32)); - acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); - - /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */ - out = ((q31_t) ((q63_t) y2 * (xfract) >> 32)); - acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); - - /* Convert acc to 1.31(q31) format */ - return (acc << 2u); - - } - - /** + /** * @brief Q15 bilinear interpolation. * @param[in,out] *S points to an instance of the interpolation structure. * @param[in] X interpolation coordinate in 12.20 format. @@ -7278,79 +7085,77 @@ void arm_rfft_fast_f32( * @return out interpolated value. */ - static __INLINE q15_t arm_bilinear_interp_q15( - arm_bilinear_interp_instance_q15 * S, - q31_t X, - q31_t Y) - { - q63_t acc = 0; /* output */ - q31_t out; /* Temporary output */ - q15_t x1, x2, y1, y2; /* Nearest output values */ - q31_t xfract, yfract; /* X, Y fractional parts */ - int32_t rI, cI; /* Row and column indices */ - q15_t *pYData = S->pData; /* pointer to output table values */ - uint32_t nCols = S->numCols; /* num of rows */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - rI = ((X & 0xFFF00000) >> 20); - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - cI = ((Y & 0xFFF00000) >> 20); - - /* Care taken for table outside boundary */ - /* Returns zero output when values are outside table boundary */ - if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + static __INLINE q15_t arm_bilinear_interp_q15( + arm_bilinear_interp_instance_q15 *S, + q31_t X, + q31_t Y) { - return (0); + q63_t acc = 0; /* output */ + q31_t out; /* Temporary output */ + q15_t x1, x2, y1, y2; /* Nearest output values */ + q31_t xfract, yfract; /* X, Y fractional parts */ + int32_t rI, cI; /* Row and column indices */ + q15_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & 0xFFF00000) >> 20); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & 0xFFF00000) >> 20); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if (rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + { + return (0); + } + + /* 20 bits for the fractional part */ + /* xfract should be in 12.20 format */ + xfract = (X & 0x000FFFFF); + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + nCols * (cI)]; + x2 = pYData[(rI) + nCols * (cI) + 1u]; + + /* 20 bits for the fractional part */ + /* yfract should be in 12.20 format */ + yfract = (Y & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + nCols * (cI + 1)]; + y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */ + + /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */ + /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */ + out = (q31_t)(((q63_t)x1 * (0xFFFFF - xfract)) >> 4u); + acc = ((q63_t)out * (0xFFFFF - yfract)); + + /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */ + out = (q31_t)(((q63_t)x2 * (0xFFFFF - yfract)) >> 4u); + acc += ((q63_t)out * (xfract)); + + /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */ + out = (q31_t)(((q63_t)y1 * (0xFFFFF - xfract)) >> 4u); + acc += ((q63_t)out * (yfract)); + + /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */ + out = (q31_t)(((q63_t)y2 * (xfract)) >> 4u); + acc += ((q63_t)out * (yfract)); + + /* acc is in 13.51 format and down shift acc by 36 times */ + /* Convert out to 1.15 format */ + return (acc >> 36); } - /* 20 bits for the fractional part */ - /* xfract should be in 12.20 format */ - xfract = (X & 0x000FFFFF); - - /* Read two nearest output values from the index */ - x1 = pYData[(rI) + nCols * (cI)]; - x2 = pYData[(rI) + nCols * (cI) + 1u]; - - - /* 20 bits for the fractional part */ - /* yfract should be in 12.20 format */ - yfract = (Y & 0x000FFFFF); - - /* Read two nearest output values from the index */ - y1 = pYData[(rI) + nCols * (cI + 1)]; - y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; - - /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */ - - /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */ - /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */ - out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u); - acc = ((q63_t) out * (0xFFFFF - yfract)); - - /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */ - out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u); - acc += ((q63_t) out * (xfract)); - - /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */ - out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u); - acc += ((q63_t) out * (yfract)); - - /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */ - out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u); - acc += ((q63_t) out * (yfract)); - - /* acc is in 13.51 format and down shift acc by 36 times */ - /* Convert out to 1.15 format */ - return (acc >> 36); - - } - - /** + /** * @brief Q7 bilinear interpolation. * @param[in,out] *S points to an instance of the interpolation structure. * @param[in] X interpolation coordinate in 12.20 format. @@ -7358,164 +7163,160 @@ void arm_rfft_fast_f32( * @return out interpolated value. */ - static __INLINE q7_t arm_bilinear_interp_q7( - arm_bilinear_interp_instance_q7 * S, - q31_t X, - q31_t Y) - { - q63_t acc = 0; /* output */ - q31_t out; /* Temporary output */ - q31_t xfract, yfract; /* X, Y fractional parts */ - q7_t x1, x2, y1, y2; /* Nearest output values */ - int32_t rI, cI; /* Row and column indices */ - q7_t *pYData = S->pData; /* pointer to output table values */ - uint32_t nCols = S->numCols; /* num of rows */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - rI = ((X & 0xFFF00000) >> 20); - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - cI = ((Y & 0xFFF00000) >> 20); - - /* Care taken for table outside boundary */ - /* Returns zero output when values are outside table boundary */ - if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + static __INLINE q7_t arm_bilinear_interp_q7( + arm_bilinear_interp_instance_q7 *S, + q31_t X, + q31_t Y) { - return (0); + q63_t acc = 0; /* output */ + q31_t out; /* Temporary output */ + q31_t xfract, yfract; /* X, Y fractional parts */ + q7_t x1, x2, y1, y2; /* Nearest output values */ + int32_t rI, cI; /* Row and column indices */ + q7_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & 0xFFF00000) >> 20); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & 0xFFF00000) >> 20); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if (rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + { + return (0); + } + + /* 20 bits for the fractional part */ + /* xfract should be in 12.20 format */ + xfract = (X & 0x000FFFFF); + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + nCols * (cI)]; + x2 = pYData[(rI) + nCols * (cI) + 1u]; + + /* 20 bits for the fractional part */ + /* yfract should be in 12.20 format */ + yfract = (Y & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + nCols * (cI + 1)]; + y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */ + out = ((x1 * (0xFFFFF - xfract))); + acc = (((q63_t)out * (0xFFFFF - yfract))); + + /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */ + out = ((x2 * (0xFFFFF - yfract))); + acc += (((q63_t)out * (xfract))); + + /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */ + out = ((y1 * (0xFFFFF - xfract))); + acc += (((q63_t)out * (yfract))); + + /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */ + out = ((y2 * (yfract))); + acc += (((q63_t)out * (xfract))); + + /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */ + return (acc >> 40); } - /* 20 bits for the fractional part */ - /* xfract should be in 12.20 format */ - xfract = (X & 0x000FFFFF); - - /* Read two nearest output values from the index */ - x1 = pYData[(rI) + nCols * (cI)]; - x2 = pYData[(rI) + nCols * (cI) + 1u]; - - - /* 20 bits for the fractional part */ - /* yfract should be in 12.20 format */ - yfract = (Y & 0x000FFFFF); - - /* Read two nearest output values from the index */ - y1 = pYData[(rI) + nCols * (cI + 1)]; - y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; - - /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */ - out = ((x1 * (0xFFFFF - xfract))); - acc = (((q63_t) out * (0xFFFFF - yfract))); - - /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */ - out = ((x2 * (0xFFFFF - yfract))); - acc += (((q63_t) out * (xfract))); - - /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */ - out = ((y1 * (0xFFFFF - xfract))); - acc += (((q63_t) out * (yfract))); - - /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */ - out = ((y2 * (yfract))); - acc += (((q63_t) out * (xfract))); - - /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */ - return (acc >> 40); - - } - - /** + /** * @} end of BilinearInterpolate group */ - //SMMLAR #define multAcc_32x32_keep32_R(a, x, y) \ - a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32) + a = (q31_t)(((((q63_t)a) << 32) + ((q63_t)x * y) + 0x80000000LL) >> 32) //SMMLSR #define multSub_32x32_keep32_R(a, x, y) \ - a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32) + a = (q31_t)(((((q63_t)a) << 32) - ((q63_t)x * y) + 0x80000000LL) >> 32) //SMMULR #define mult_32x32_keep32_R(a, x, y) \ - a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32) + a = (q31_t)(((q63_t)x * y + 0x80000000LL) >> 32) //SMMLA #define multAcc_32x32_keep32(a, x, y) \ - a += (q31_t) (((q63_t) x * y) >> 32) + a += (q31_t)(((q63_t)x * y) >> 32) //SMMLS #define multSub_32x32_keep32(a, x, y) \ - a -= (q31_t) (((q63_t) x * y) >> 32) + a -= (q31_t)(((q63_t)x * y) >> 32) //SMMUL #define mult_32x32_keep32(a, x, y) \ - a = (q31_t) (((q63_t) x * y ) >> 32) + a = (q31_t)(((q63_t)x * y) >> 32) +#if defined(__CC_ARM) //Keil -#if defined ( __CC_ARM ) //Keil + //Enter low optimization region - place directly above function definition +#ifdef ARM_MATH_CM4 +#define LOW_OPTIMIZATION_ENTER \ + _Pragma("push") \ + _Pragma("O1") +#else +#define LOW_OPTIMIZATION_ENTER +#endif -//Enter low optimization region - place directly above function definition - #ifdef ARM_MATH_CM4 - #define LOW_OPTIMIZATION_ENTER \ - _Pragma ("push") \ - _Pragma ("O1") - #else - #define LOW_OPTIMIZATION_ENTER - #endif + //Exit low optimization region - place directly after end of function definition +#ifdef ARM_MATH_CM4 +#define LOW_OPTIMIZATION_EXIT \ + _Pragma("pop") +#else +#define LOW_OPTIMIZATION_EXIT +#endif -//Exit low optimization region - place directly after end of function definition - #ifdef ARM_MATH_CM4 - #define LOW_OPTIMIZATION_EXIT \ - _Pragma ("pop") - #else - #define LOW_OPTIMIZATION_EXIT - #endif + //Enter low optimization region - place directly above function definition +#define IAR_ONLY_LOW_OPTIMIZATION_ENTER -//Enter low optimization region - place directly above function definition - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER - -//Exit low optimization region - place directly after end of function definition - #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + //Exit low optimization region - place directly after end of function definition +#define IAR_ONLY_LOW_OPTIMIZATION_EXIT #elif defined(__ICCARM__) //IAR //Enter low optimization region - place directly above function definition - #ifdef ARM_MATH_CM4 - #define LOW_OPTIMIZATION_ENTER \ - _Pragma ("optimize=low") - #else - #define LOW_OPTIMIZATION_ENTER - #endif +#ifdef ARM_MATH_CM4 +#define LOW_OPTIMIZATION_ENTER \ + _Pragma("optimize=low") +#else +#define LOW_OPTIMIZATION_ENTER +#endif //Exit low optimization region - place directly after end of function definition - #define LOW_OPTIMIZATION_EXIT +#define LOW_OPTIMIZATION_EXIT //Enter low optimization region - place directly above function definition - #ifdef ARM_MATH_CM4 - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \ - _Pragma ("optimize=low") - #else - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER - #endif +#ifdef ARM_MATH_CM4 +#define IAR_ONLY_LOW_OPTIMIZATION_ENTER \ + _Pragma("optimize=low") +#else +#define IAR_ONLY_LOW_OPTIMIZATION_ENTER +#endif //Exit low optimization region - place directly after end of function definition - #define IAR_ONLY_LOW_OPTIMIZATION_EXIT +#define IAR_ONLY_LOW_OPTIMIZATION_EXIT #elif defined(__GNUC__) - #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") )) +#define LOW_OPTIMIZATION_ENTER __attribute__((optimize("-O1"))) - #define LOW_OPTIMIZATION_EXIT +#define LOW_OPTIMIZATION_EXIT - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER +#define IAR_ONLY_LOW_OPTIMIZATION_ENTER - #define IAR_ONLY_LOW_OPTIMIZATION_EXIT +#define IAR_ONLY_LOW_OPTIMIZATION_EXIT -#elif defined(__CSMC__) // Cosmic +#elif defined(__CSMC__) // Cosmic #define LOW_OPTIMIZATION_ENTER #define LOW_OPTIMIZATION_EXIT @@ -7524,12 +7325,10 @@ void arm_rfft_fast_f32( #endif - -#ifdef __cplusplus +#ifdef __cplusplus } #endif - #endif /* _ARM_MATH_H */ /** diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm0.h b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm0.h index 5186cb4838..da584c05a6 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm0.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm0.h @@ -1,4 +1,4 @@ -/**************************************************************************//** +/**************************************************************************/ /** * @file core_cm0.h * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File * @version V4.00 @@ -34,16 +34,16 @@ POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ +#if defined(__ICCARM__) +#pragma system_include /* treat file as system include file for MISRA check */ #endif #ifndef __CORE_CM0_H_GENERIC #define __CORE_CM0_H_GENERIC #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions @@ -59,7 +59,6 @@ Function-like macros are used to allow more efficient code. */ - /******************************************************************************* * CMSIS definitions ******************************************************************************/ @@ -68,85 +67,84 @@ */ /* CMSIS CM0 definitions */ -#define __CM0_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ -#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ -#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \ - __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ +#define __CM0_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \ + __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ -#define __CORTEX_M (0x00) /*!< Cortex-M Core */ +#define __CORTEX_M (0x00) /*!< Cortex-M Core */ +#if defined(__CC_ARM) +#define __ASM __asm /*!< asm keyword for ARM Compiler */ +#define __INLINE __inline /*!< inline keyword for ARM Compiler */ +#define __STATIC_INLINE static __inline -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline +#elif defined(__GNUC__) +#define __ASM __asm /*!< asm keyword for GNU Compiler */ +#define __INLINE inline /*!< inline keyword for GNU Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__ICCARM__) +#define __ASM __asm /*!< asm keyword for IAR Compiler */ +#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ +#define __STATIC_INLINE static inline -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline +#elif defined(__TMS470__) +#define __ASM __asm /*!< asm keyword for TI CCS Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__TASKING__) +#define __ASM __asm /*!< asm keyword for TASKING Compiler */ +#define __INLINE inline /*!< inline keyword for TASKING Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__CSMC__) +#define __packed +#define __ASM _asm /*!< asm keyword for COSMIC Compiler */ +#define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ +#define __STATIC_INLINE static inline #endif /** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all */ -#define __FPU_USED 0 +#define __FPU_USED 0 -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI__VFP_SUPPORT____ - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) /* Cosmic */ - #if ( __CSMC__ & 0x400) // FPU present for parser - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif +#if defined(__CC_ARM) +#if defined __TARGET_FPU_VFP +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif -#include /* standard types definitions */ -#include /* Core Instruction Access */ -#include /* Core Function Access */ +#elif defined(__GNUC__) +#if defined(__VFP_FP__) && !defined(__SOFTFP__) +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__ICCARM__) +#if defined __ARMVFP__ +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__TMS470__) +#if defined __TI__VFP_SUPPORT____ +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__TASKING__) +#if defined __FPU_VFP__ +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__CSMC__) /* Cosmic */ +#if (__CSMC__ & 0x400) // FPU present for parser +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ #ifdef __cplusplus } @@ -160,25 +158,26 @@ #define __CORE_CM0_H_DEPENDANT #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /* check device defines and use defaults */ #if defined __CHECK_DEVICE_DEFINES - #ifndef __CM0_REV - #define __CM0_REV 0x0000 - #warning "__CM0_REV not defined in device header file; using default!" - #endif +#ifndef __CM0_REV +#define __CM0_REV 0x0000 +#warning "__CM0_REV not defined in device header file; using default!" +#endif - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2 - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif +#ifndef __NVIC_PRIO_BITS +#define __NVIC_PRIO_BITS 2 +#warning "__NVIC_PRIO_BITS not defined in device header file; using default!" +#endif - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0 - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif +#ifndef __Vendor_SysTickConfig +#define __Vendor_SysTickConfig 0 +#warning "__Vendor_SysTickConfig not defined in device header file; using default!" +#endif #endif /* IO definitions (access restrictions to peripheral registers) */ @@ -190,18 +189,16 @@ \li for automatic generation of peripheral register debug information. */ #ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ +#define __I volatile /*!< Defines 'read only' permissions */ #else - #define __I volatile const /*!< Defines 'read only' permissions */ +#define __I volatile const /*!< Defines 'read only' permissions */ #endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ -/*@} end of group Cortex_M0 */ + /*@} end of group Cortex_M0 */ - - -/******************************************************************************* + /******************************************************************************* * Register Abstraction Core Register contain: - Core Register @@ -209,275 +206,268 @@ - Core SCB Register - Core SysTick Register ******************************************************************************/ -/** \defgroup CMSIS_core_register Defines and Type Definitions + /** \defgroup CMSIS_core_register Defines and Type Definitions \brief Type definitions and defines for Cortex-M processor based devices. */ -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_CORE Status and Control Registers \brief Core Register type definitions. @{ */ -/** \brief Union type to access the Application Program Status Register (APSR). + /** \brief Union type to access the Application Program Status Register (APSR). */ -typedef union -{ - struct - { + typedef union + { + struct + { #if (__CORTEX_M != 0x04) - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t _reserved0 : 27; /*!< bit: 0..26 Reserved */ #else - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t _reserved0 : 16; /*!< bit: 0..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 7; /*!< bit: 20..26 Reserved */ #endif - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } APSR_Type; - -/** \brief Union type to access the Interrupt Program Status Register (IPSR). + /** \brief Union type to access the Interrupt Program Status Register (IPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0 : 23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } IPSR_Type; - -/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + /** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ #if (__CORTEX_M != 0x04) - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t _reserved0 : 15; /*!< bit: 9..23 Reserved */ #else - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t _reserved0 : 7; /*!< bit: 9..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 4; /*!< bit: 20..23 Reserved */ #endif - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; + uint32_t T : 1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT : 2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } xPSR_Type; - -/** \brief Union type to access the Control Registers (CONTROL). + /** \brief Union type to access the Control Registers (CONTROL). */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; + typedef union + { + struct + { + uint32_t nPRIV : 1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL : 1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA : 1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0 : 29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } CONTROL_Type; -/*@} end of group CMSIS_CORE */ + /*@} end of group CMSIS_CORE */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) \brief Type definitions for the NVIC Registers @{ */ -/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + /** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). */ -typedef struct -{ - __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31]; - __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31]; - __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31]; - __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31]; - uint32_t RESERVED4[64]; - __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; + typedef struct + { + __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31]; + __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31]; + __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31]; + __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31]; + uint32_t RESERVED4[64]; + __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ + } NVIC_Type; -/*@} end of group CMSIS_NVIC */ + /*@} end of group CMSIS_NVIC */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SCB System Control Block (SCB) \brief Type definitions for the System Control Block Registers @{ */ -/** \brief Structure type to access the System Control Block (SCB). + /** \brief Structure type to access the System Control Block (SCB). */ -typedef struct -{ - __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - uint32_t RESERVED0; - __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; + typedef struct + { + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + } SCB_Type; /* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ -#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ -#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ -#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ -#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ /* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ -#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ -#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ -#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ -#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ -#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ -#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ -#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ -#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ /* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ -#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ -#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ -#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ /* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ -#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ -#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ /* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ -#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ /* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ -/*@} end of group CMSIS_SCB */ + /*@} end of group CMSIS_SCB */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SysTick System Tick Timer (SysTick) \brief Type definitions for the System Timer Registers. @{ */ -/** \brief Structure type to access the System Timer (SysTick). + /** \brief Structure type to access the System Timer (SysTick). */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; + typedef struct + { + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ + } SysTick_Type; /* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ -#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ -#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ -#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ /* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ /* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ /* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ -#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ -#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ /*@} end of group CMSIS_SysTick */ - /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) @@ -487,7 +477,6 @@ typedef struct */ /*@} end of group CMSIS_CoreDebug */ - /** \ingroup CMSIS_core_register \defgroup CMSIS_core_base Core Definitions \brief Definitions for base addresses, unions, and structures. @@ -495,20 +484,17 @@ typedef struct */ /* Memory mapping of Cortex-M0 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ +#define SCB ((SCB_Type *)SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *)SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *)NVIC_BASE) /*!< NVIC configuration struct */ /*@} */ - - /******************************************************************************* * Hardware Abstraction Layer Core Function Interface contains: @@ -519,8 +505,6 @@ typedef struct /** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference */ - - /* ########################## NVIC functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_NVICFunctions NVIC Functions @@ -530,36 +514,33 @@ typedef struct /* Interrupt Priorities are WORD accessible only under ARMv6M */ /* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 ) -#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) ) -#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) ) +#define _BIT_SHIFT(IRQn) ((((uint32_t)(IRQn)) & 0x03) * 8) +#define _SHP_IDX(IRQn) (((((uint32_t)(IRQn)&0x0F) - 8) >> 2)) +#define _IP_IDX(IRQn) (((uint32_t)(IRQn) >> 2)) - -/** \brief Enable External Interrupt + /** \brief Enable External Interrupt The function enables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} + __STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) + { + NVIC->ISER[0] = (1 << ((uint32_t)(IRQn)&0x1F)); + } - -/** \brief Disable External Interrupt + /** \brief Disable External Interrupt The function disables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} + __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) + { + NVIC->ICER[0] = (1 << ((uint32_t)(IRQn)&0x1F)); + } - -/** \brief Get Pending Interrupt + /** \brief Get Pending Interrupt The function reads the pending register in the NVIC and returns the pending bit for the specified interrupt. @@ -569,37 +550,34 @@ __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) \return 0 Interrupt status is not pending. \return 1 Interrupt status is pending. */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); -} + __STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) + { + return ((uint32_t)((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn)&0x1F))) ? 1 : 0)); + } - -/** \brief Set Pending Interrupt + /** \brief Set Pending Interrupt The function sets the pending bit of an external interrupt. \param [in] IRQn Interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} + __STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) + { + NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn)&0x1F)); + } - -/** \brief Clear Pending Interrupt + /** \brief Clear Pending Interrupt The function clears the pending bit of an external interrupt. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ -} + __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) + { + NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn)&0x1F)); /* Clear pending interrupt */ + } - -/** \brief Set Interrupt Priority + /** \brief Set Interrupt Priority The function sets the priority of an interrupt. @@ -608,18 +586,21 @@ __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) \param [in] IRQn Interrupt number. \param [in] priority Priority to set. */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if(IRQn < 0) { - SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | - (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } - else { - NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | - (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } -} + __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) + { + if (IRQn < 0) + { + SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); + } + else + { + NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); + } + } - -/** \brief Get Interrupt Priority + /** \brief Get Interrupt Priority The function reads the priority of an interrupt. The interrupt number can be positive to specify an external (device specific) @@ -630,36 +611,38 @@ __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ + __STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) + { - if(IRQn < 0) { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */ - else { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ -} + if (IRQn < 0) + { + return ((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn)) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for Cortex-M0 system interrupts */ + else + { + return ((uint32_t)(((NVIC->IP[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn)) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for device specific interrupts */ + } - -/** \brief System Reset + /** \brief System Reset The function initiates a system reset request to reset the MCU. */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included + __STATIC_INLINE void NVIC_SystemReset(void) + { + __DSB(); /* Ensure all outstanding memory accesses included buffered write are completed before reset */ - SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - while(1); /* wait until reset */ -} + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + while (1) + ; /* wait until reset */ + } -/*@} end of CMSIS_Core_NVICFunctions */ + /*@} end of CMSIS_Core_NVICFunctions */ - - -/* ################################## SysTick function ############################################ */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ################################## SysTick function ############################################ */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_SysTickFunctions SysTick Functions \brief Functions that configure the System. @{ @@ -667,7 +650,7 @@ __STATIC_INLINE void NVIC_SystemReset(void) #if (__Vendor_SysTickConfig == 0) -/** \brief System Tick Configuration + /** \brief System Tick Configuration The function initializes the System Timer and its interrupt, and starts the System Tick Timer. Counter is in free running mode to generate periodic interrupts. @@ -682,25 +665,23 @@ __STATIC_INLINE void NVIC_SystemReset(void) must contain a vendor-specific implementation of this function. */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) + { + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) + return (1); /* Reload value impossible */ - SysTick->LOAD = ticks - 1; /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0); /* Function successful */ -} + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority(SysTick_IRQn, (1 << __NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ + } #endif -/*@} end of CMSIS_Core_SysTickFunctions */ - - - + /*@} end of CMSIS_Core_SysTickFunctions */ #ifdef __cplusplus } diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm0plus.h b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm0plus.h index 17e43984fc..a8af6dba6d 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm0plus.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm0plus.h @@ -1,4 +1,4 @@ -/**************************************************************************//** +/**************************************************************************/ /** * @file core_cm0plus.h * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File * @version V4.00 @@ -34,16 +34,16 @@ POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ +#if defined(__ICCARM__) +#pragma system_include /* treat file as system include file for MISRA check */ #endif #ifndef __CORE_CM0PLUS_H_GENERIC #define __CORE_CM0PLUS_H_GENERIC #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions @@ -59,7 +59,6 @@ Function-like macros are used to allow more efficient code. */ - /******************************************************************************* * CMSIS definitions ******************************************************************************/ @@ -68,85 +67,84 @@ */ /* CMSIS CM0P definitions */ -#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ -#define __CM0PLUS_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ -#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \ - __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \ + __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ -#define __CORTEX_M (0x00) /*!< Cortex-M Core */ +#define __CORTEX_M (0x00) /*!< Cortex-M Core */ +#if defined(__CC_ARM) +#define __ASM __asm /*!< asm keyword for ARM Compiler */ +#define __INLINE __inline /*!< inline keyword for ARM Compiler */ +#define __STATIC_INLINE static __inline -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline +#elif defined(__GNUC__) +#define __ASM __asm /*!< asm keyword for GNU Compiler */ +#define __INLINE inline /*!< inline keyword for GNU Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__ICCARM__) +#define __ASM __asm /*!< asm keyword for IAR Compiler */ +#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ +#define __STATIC_INLINE static inline -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline +#elif defined(__TMS470__) +#define __ASM __asm /*!< asm keyword for TI CCS Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__TASKING__) +#define __ASM __asm /*!< asm keyword for TASKING Compiler */ +#define __INLINE inline /*!< inline keyword for TASKING Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__CSMC__) +#define __packed +#define __ASM _asm /*!< asm keyword for COSMIC Compiler */ +#define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ +#define __STATIC_INLINE static inline #endif /** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all */ -#define __FPU_USED 0 +#define __FPU_USED 0 -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI__VFP_SUPPORT____ - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) /* Cosmic */ - #if ( __CSMC__ & 0x400) // FPU present for parser - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif +#if defined(__CC_ARM) +#if defined __TARGET_FPU_VFP +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif -#include /* standard types definitions */ -#include /* Core Instruction Access */ -#include /* Core Function Access */ +#elif defined(__GNUC__) +#if defined(__VFP_FP__) && !defined(__SOFTFP__) +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__ICCARM__) +#if defined __ARMVFP__ +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__TMS470__) +#if defined __TI__VFP_SUPPORT____ +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__TASKING__) +#if defined __FPU_VFP__ +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__CSMC__) /* Cosmic */ +#if (__CSMC__ & 0x400) // FPU present for parser +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ #ifdef __cplusplus } @@ -160,35 +158,36 @@ #define __CORE_CM0PLUS_H_DEPENDANT #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /* check device defines and use defaults */ #if defined __CHECK_DEVICE_DEFINES - #ifndef __CM0PLUS_REV - #define __CM0PLUS_REV 0x0000 - #warning "__CM0PLUS_REV not defined in device header file; using default!" - #endif +#ifndef __CM0PLUS_REV +#define __CM0PLUS_REV 0x0000 +#warning "__CM0PLUS_REV not defined in device header file; using default!" +#endif - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0 - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif +#ifndef __MPU_PRESENT +#define __MPU_PRESENT 0 +#warning "__MPU_PRESENT not defined in device header file; using default!" +#endif - #ifndef __VTOR_PRESENT - #define __VTOR_PRESENT 0 - #warning "__VTOR_PRESENT not defined in device header file; using default!" - #endif +#ifndef __VTOR_PRESENT +#define __VTOR_PRESENT 0 +#warning "__VTOR_PRESENT not defined in device header file; using default!" +#endif - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2 - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif +#ifndef __NVIC_PRIO_BITS +#define __NVIC_PRIO_BITS 2 +#warning "__NVIC_PRIO_BITS not defined in device header file; using default!" +#endif - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0 - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif +#ifndef __Vendor_SysTickConfig +#define __Vendor_SysTickConfig 0 +#warning "__Vendor_SysTickConfig not defined in device header file; using default!" +#endif #endif /* IO definitions (access restrictions to peripheral registers) */ @@ -200,18 +199,16 @@ \li for automatic generation of peripheral register debug information. */ #ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ +#define __I volatile /*!< Defines 'read only' permissions */ #else - #define __I volatile const /*!< Defines 'read only' permissions */ +#define __I volatile const /*!< Defines 'read only' permissions */ #endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ -/*@} end of group Cortex-M0+ */ + /*@} end of group Cortex-M0+ */ - - -/******************************************************************************* + /******************************************************************************* * Register Abstraction Core Register contain: - Core Register @@ -220,371 +217,364 @@ - Core SysTick Register - Core MPU Register ******************************************************************************/ -/** \defgroup CMSIS_core_register Defines and Type Definitions + /** \defgroup CMSIS_core_register Defines and Type Definitions \brief Type definitions and defines for Cortex-M processor based devices. */ -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_CORE Status and Control Registers \brief Core Register type definitions. @{ */ -/** \brief Union type to access the Application Program Status Register (APSR). + /** \brief Union type to access the Application Program Status Register (APSR). */ -typedef union -{ - struct - { + typedef union + { + struct + { #if (__CORTEX_M != 0x04) - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t _reserved0 : 27; /*!< bit: 0..26 Reserved */ #else - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t _reserved0 : 16; /*!< bit: 0..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 7; /*!< bit: 20..26 Reserved */ #endif - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } APSR_Type; - -/** \brief Union type to access the Interrupt Program Status Register (IPSR). + /** \brief Union type to access the Interrupt Program Status Register (IPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0 : 23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } IPSR_Type; - -/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + /** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ #if (__CORTEX_M != 0x04) - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t _reserved0 : 15; /*!< bit: 9..23 Reserved */ #else - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t _reserved0 : 7; /*!< bit: 9..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 4; /*!< bit: 20..23 Reserved */ #endif - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; + uint32_t T : 1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT : 2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } xPSR_Type; - -/** \brief Union type to access the Control Registers (CONTROL). + /** \brief Union type to access the Control Registers (CONTROL). */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; + typedef union + { + struct + { + uint32_t nPRIV : 1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL : 1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA : 1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0 : 29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } CONTROL_Type; -/*@} end of group CMSIS_CORE */ + /*@} end of group CMSIS_CORE */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) \brief Type definitions for the NVIC Registers @{ */ -/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + /** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). */ -typedef struct -{ - __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31]; - __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31]; - __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31]; - __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31]; - uint32_t RESERVED4[64]; - __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; + typedef struct + { + __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31]; + __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31]; + __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31]; + __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31]; + uint32_t RESERVED4[64]; + __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ + } NVIC_Type; -/*@} end of group CMSIS_NVIC */ + /*@} end of group CMSIS_NVIC */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SCB System Control Block (SCB) \brief Type definitions for the System Control Block Registers @{ */ -/** \brief Structure type to access the System Control Block (SCB). + /** \brief Structure type to access the System Control Block (SCB). */ -typedef struct -{ - __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + typedef struct + { + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ #if (__VTOR_PRESENT == 1) - __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ #else - uint32_t RESERVED0; + uint32_t RESERVED0; #endif - __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + } SCB_Type; /* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ -#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ -#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ -#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ -#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ /* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ -#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ -#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ -#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ -#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ -#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ -#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ -#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ -#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ #if (__VTOR_PRESENT == 1) /* SCB Interrupt Control State Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ #endif /* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ -#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ -#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ -#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ /* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ -#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ -#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ /* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ -#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ /* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ -/*@} end of group CMSIS_SCB */ + /*@} end of group CMSIS_SCB */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SysTick System Tick Timer (SysTick) \brief Type definitions for the System Timer Registers. @{ */ -/** \brief Structure type to access the System Timer (SysTick). + /** \brief Structure type to access the System Timer (SysTick). */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; + typedef struct + { + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ + } SysTick_Type; /* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ -#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ -#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ -#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ /* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ /* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ /* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ -#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ -#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ -/*@} end of group CMSIS_SysTick */ + /*@} end of group CMSIS_SysTick */ #if (__MPU_PRESENT == 1) -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_MPU Memory Protection Unit (MPU) \brief Type definitions for the Memory Protection Unit (MPU) @{ */ -/** \brief Structure type to access the Memory Protection Unit (MPU). + /** \brief Structure type to access the Memory Protection Unit (MPU). */ -typedef struct -{ - __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ -} MPU_Type; + typedef struct + { + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + } MPU_Type; /* MPU Type Register */ -#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ -#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ -#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ /* MPU Control Register */ -#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ -#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ -#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ /* MPU Region Number Register */ -#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ /* MPU Region Base Address Register */ -#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ +#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ -#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ -#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ /* MPU Region Attribute and Size Register */ -#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ -#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ -#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ -#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ -#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ -#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ -#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ -#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ -#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ -#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ /*@} end of group CMSIS_MPU */ #endif - /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) @@ -594,7 +584,6 @@ typedef struct */ /*@} end of group CMSIS_CoreDebug */ - /** \ingroup CMSIS_core_register \defgroup CMSIS_core_base Core Definitions \brief Definitions for base addresses, unions, and structures. @@ -602,24 +591,22 @@ typedef struct */ /* Memory mapping of Cortex-M0+ Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define SCB ((SCB_Type *)SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *)SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *)NVIC_BASE) /*!< NVIC configuration struct */ #if (__MPU_PRESENT == 1) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ +#define MPU ((MPU_Type *)MPU_BASE) /*!< Memory Protection Unit */ #endif /*@} */ - - /******************************************************************************* * Hardware Abstraction Layer Core Function Interface contains: @@ -630,8 +617,6 @@ typedef struct /** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference */ - - /* ########################## NVIC functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_NVICFunctions NVIC Functions @@ -641,36 +626,33 @@ typedef struct /* Interrupt Priorities are WORD accessible only under ARMv6M */ /* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 ) -#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) ) -#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) ) +#define _BIT_SHIFT(IRQn) ((((uint32_t)(IRQn)) & 0x03) * 8) +#define _SHP_IDX(IRQn) (((((uint32_t)(IRQn)&0x0F) - 8) >> 2)) +#define _IP_IDX(IRQn) (((uint32_t)(IRQn) >> 2)) - -/** \brief Enable External Interrupt + /** \brief Enable External Interrupt The function enables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} + __STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) + { + NVIC->ISER[0] = (1 << ((uint32_t)(IRQn)&0x1F)); + } - -/** \brief Disable External Interrupt + /** \brief Disable External Interrupt The function disables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} + __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) + { + NVIC->ICER[0] = (1 << ((uint32_t)(IRQn)&0x1F)); + } - -/** \brief Get Pending Interrupt + /** \brief Get Pending Interrupt The function reads the pending register in the NVIC and returns the pending bit for the specified interrupt. @@ -680,37 +662,34 @@ __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) \return 0 Interrupt status is not pending. \return 1 Interrupt status is pending. */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); -} + __STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) + { + return ((uint32_t)((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn)&0x1F))) ? 1 : 0)); + } - -/** \brief Set Pending Interrupt + /** \brief Set Pending Interrupt The function sets the pending bit of an external interrupt. \param [in] IRQn Interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} + __STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) + { + NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn)&0x1F)); + } - -/** \brief Clear Pending Interrupt + /** \brief Clear Pending Interrupt The function clears the pending bit of an external interrupt. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ -} + __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) + { + NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn)&0x1F)); /* Clear pending interrupt */ + } - -/** \brief Set Interrupt Priority + /** \brief Set Interrupt Priority The function sets the priority of an interrupt. @@ -719,18 +698,21 @@ __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) \param [in] IRQn Interrupt number. \param [in] priority Priority to set. */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if(IRQn < 0) { - SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | - (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } - else { - NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | - (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } -} + __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) + { + if (IRQn < 0) + { + SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); + } + else + { + NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); + } + } - -/** \brief Get Interrupt Priority + /** \brief Get Interrupt Priority The function reads the priority of an interrupt. The interrupt number can be positive to specify an external (device specific) @@ -741,36 +723,38 @@ __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ + __STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) + { - if(IRQn < 0) { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */ - else { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ -} + if (IRQn < 0) + { + return ((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn)) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for Cortex-M0 system interrupts */ + else + { + return ((uint32_t)(((NVIC->IP[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn)) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for device specific interrupts */ + } - -/** \brief System Reset + /** \brief System Reset The function initiates a system reset request to reset the MCU. */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included + __STATIC_INLINE void NVIC_SystemReset(void) + { + __DSB(); /* Ensure all outstanding memory accesses included buffered write are completed before reset */ - SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - while(1); /* wait until reset */ -} + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + while (1) + ; /* wait until reset */ + } -/*@} end of CMSIS_Core_NVICFunctions */ + /*@} end of CMSIS_Core_NVICFunctions */ - - -/* ################################## SysTick function ############################################ */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ################################## SysTick function ############################################ */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_SysTickFunctions SysTick Functions \brief Functions that configure the System. @{ @@ -778,7 +762,7 @@ __STATIC_INLINE void NVIC_SystemReset(void) #if (__Vendor_SysTickConfig == 0) -/** \brief System Tick Configuration + /** \brief System Tick Configuration The function initializes the System Timer and its interrupt, and starts the System Tick Timer. Counter is in free running mode to generate periodic interrupts. @@ -793,25 +777,23 @@ __STATIC_INLINE void NVIC_SystemReset(void) must contain a vendor-specific implementation of this function. */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) + { + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) + return (1); /* Reload value impossible */ - SysTick->LOAD = ticks - 1; /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0); /* Function successful */ -} + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority(SysTick_IRQn, (1 << __NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ + } #endif -/*@} end of CMSIS_Core_SysTickFunctions */ - - - + /*@} end of CMSIS_Core_SysTickFunctions */ #ifdef __cplusplus } diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm3.h b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm3.h index e1357c6735..2e6ec11a45 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm3.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm3.h @@ -1,4 +1,4 @@ -/**************************************************************************//** +/**************************************************************************/ /** * @file core_cm3.h * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File * @version V4.00 @@ -34,16 +34,16 @@ POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ +#if defined(__ICCARM__) +#pragma system_include /* treat file as system include file for MISRA check */ #endif #ifndef __CORE_CM3_H_GENERIC #define __CORE_CM3_H_GENERIC #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions @@ -59,7 +59,6 @@ Function-like macros are used to allow more efficient code. */ - /******************************************************************************* * CMSIS definitions ******************************************************************************/ @@ -68,85 +67,84 @@ */ /* CMSIS CM3 definitions */ -#define __CM3_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ -#define __CM3_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ -#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \ - __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ +#define __CM3_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \ + __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ -#define __CORTEX_M (0x03) /*!< Cortex-M Core */ +#define __CORTEX_M (0x03) /*!< Cortex-M Core */ +#if defined(__CC_ARM) +#define __ASM __asm /*!< asm keyword for ARM Compiler */ +#define __INLINE __inline /*!< inline keyword for ARM Compiler */ +#define __STATIC_INLINE static __inline -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline +#elif defined(__GNUC__) +#define __ASM __asm /*!< asm keyword for GNU Compiler */ +#define __INLINE inline /*!< inline keyword for GNU Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__ICCARM__) +#define __ASM __asm /*!< asm keyword for IAR Compiler */ +#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ +#define __STATIC_INLINE static inline -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline +#elif defined(__TMS470__) +#define __ASM __asm /*!< asm keyword for TI CCS Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__TASKING__) +#define __ASM __asm /*!< asm keyword for TASKING Compiler */ +#define __INLINE inline /*!< inline keyword for TASKING Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__CSMC__) +#define __packed +#define __ASM _asm /*!< asm keyword for COSMIC Compiler */ +#define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ +#define __STATIC_INLINE static inline #endif /** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all */ -#define __FPU_USED 0 +#define __FPU_USED 0 -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI__VFP_SUPPORT____ - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) /* Cosmic */ - #if ( __CSMC__ & 0x400) // FPU present for parser - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif +#if defined(__CC_ARM) +#if defined __TARGET_FPU_VFP +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif -#include /* standard types definitions */ -#include /* Core Instruction Access */ -#include /* Core Function Access */ +#elif defined(__GNUC__) +#if defined(__VFP_FP__) && !defined(__SOFTFP__) +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__ICCARM__) +#if defined __ARMVFP__ +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__TMS470__) +#if defined __TI__VFP_SUPPORT____ +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__TASKING__) +#if defined __FPU_VFP__ +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif + +#elif defined(__CSMC__) /* Cosmic */ +#if (__CSMC__ & 0x400) // FPU present for parser +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ #ifdef __cplusplus } @@ -160,30 +158,31 @@ #define __CORE_CM3_H_DEPENDANT #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /* check device defines and use defaults */ #if defined __CHECK_DEVICE_DEFINES - #ifndef __CM3_REV - #define __CM3_REV 0x0200 - #warning "__CM3_REV not defined in device header file; using default!" - #endif +#ifndef __CM3_REV +#define __CM3_REV 0x0200 +#warning "__CM3_REV not defined in device header file; using default!" +#endif - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0 - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif +#ifndef __MPU_PRESENT +#define __MPU_PRESENT 0 +#warning "__MPU_PRESENT not defined in device header file; using default!" +#endif - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 4 - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif +#ifndef __NVIC_PRIO_BITS +#define __NVIC_PRIO_BITS 4 +#warning "__NVIC_PRIO_BITS not defined in device header file; using default!" +#endif - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0 - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif +#ifndef __Vendor_SysTickConfig +#define __Vendor_SysTickConfig 0 +#warning "__Vendor_SysTickConfig not defined in device header file; using default!" +#endif #endif /* IO definitions (access restrictions to peripheral registers) */ @@ -195,18 +194,16 @@ \li for automatic generation of peripheral register debug information. */ #ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ +#define __I volatile /*!< Defines 'read only' permissions */ #else - #define __I volatile const /*!< Defines 'read only' permissions */ +#define __I volatile const /*!< Defines 'read only' permissions */ #endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ -/*@} end of group Cortex_M3 */ + /*@} end of group Cortex_M3 */ - - -/******************************************************************************* + /******************************************************************************* * Register Abstraction Core Register contain: - Core Register @@ -216,1034 +213,1021 @@ - Core Debug Register - Core MPU Register ******************************************************************************/ -/** \defgroup CMSIS_core_register Defines and Type Definitions + /** \defgroup CMSIS_core_register Defines and Type Definitions \brief Type definitions and defines for Cortex-M processor based devices. */ -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_CORE Status and Control Registers \brief Core Register type definitions. @{ */ -/** \brief Union type to access the Application Program Status Register (APSR). + /** \brief Union type to access the Application Program Status Register (APSR). */ -typedef union -{ - struct - { + typedef union + { + struct + { #if (__CORTEX_M != 0x04) - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t _reserved0 : 27; /*!< bit: 0..26 Reserved */ #else - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t _reserved0 : 16; /*!< bit: 0..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 7; /*!< bit: 20..26 Reserved */ #endif - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } APSR_Type; - -/** \brief Union type to access the Interrupt Program Status Register (IPSR). + /** \brief Union type to access the Interrupt Program Status Register (IPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0 : 23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } IPSR_Type; - -/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + /** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ #if (__CORTEX_M != 0x04) - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t _reserved0 : 15; /*!< bit: 9..23 Reserved */ #else - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t _reserved0 : 7; /*!< bit: 9..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 4; /*!< bit: 20..23 Reserved */ #endif - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; + uint32_t T : 1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT : 2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } xPSR_Type; - -/** \brief Union type to access the Control Registers (CONTROL). + /** \brief Union type to access the Control Registers (CONTROL). */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; + typedef union + { + struct + { + uint32_t nPRIV : 1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL : 1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA : 1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0 : 29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } CONTROL_Type; -/*@} end of group CMSIS_CORE */ + /*@} end of group CMSIS_CORE */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) \brief Type definitions for the NVIC Registers @{ */ -/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + /** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). */ -typedef struct -{ - __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24]; - __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24]; - __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24]; - __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24]; - __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56]; - __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644]; - __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; + typedef struct + { + __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ + } NVIC_Type; /* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ +#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ -/*@} end of group CMSIS_NVIC */ + /*@} end of group CMSIS_NVIC */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SCB System Control Block (SCB) \brief Type definitions for the System Control Block Registers @{ */ -/** \brief Structure type to access the System Control Block (SCB). + /** \brief Structure type to access the System Control Block (SCB). */ -typedef struct -{ - __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5]; - __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ -} SCB_Type; + typedef struct + { + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5]; + __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + } SCB_Type; /* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ -#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ -#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ -#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ -#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ /* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ -#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ -#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ -#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ -#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ -#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ -#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ -#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ -#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ -#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ /* SCB Vector Table Offset Register Definitions */ -#if (__CM3_REV < 0x0201) /* core r2p1 */ -#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ -#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ +#if (__CM3_REV < 0x0201) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ -#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ #else -#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ #endif /* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ -#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ -#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ -#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ -#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ -#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ /* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ -#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ -#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ /* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ -#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ -#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ -#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ -#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ -#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ /* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ -#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ -#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ -#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ -#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ -#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ -#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ -#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ -#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ -#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ -#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ /* SCB Configurable Fault Status Registers Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ -#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ -#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ /* SCB Hard Fault Status Registers Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ -#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ -#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ /* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ -#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ -#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ -#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ -#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ -/*@} end of group CMSIS_SCB */ + /*@} end of group CMSIS_SCB */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) \brief Type definitions for the System Control and ID Register not in the SCB @{ */ -/** \brief Structure type to access the System Control and ID Register not in the SCB. + /** \brief Structure type to access the System Control and ID Register not in the SCB. */ -typedef struct -{ - uint32_t RESERVED0[1]; - __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + typedef struct + { + uint32_t RESERVED0[1]; + __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ #if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) - __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ #else - uint32_t RESERVED1[1]; + uint32_t RESERVED1[1]; #endif -} SCnSCB_Type; + } SCnSCB_Type; /* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ -/* Auxiliary Control Register Definitions */ + /* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ -#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */ -#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ -/*@} end of group CMSIS_SCnotSCB */ + /*@} end of group CMSIS_SCnotSCB */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SysTick System Tick Timer (SysTick) \brief Type definitions for the System Timer Registers. @{ */ -/** \brief Structure type to access the System Timer (SysTick). + /** \brief Structure type to access the System Timer (SysTick). */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; + typedef struct + { + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ + } SysTick_Type; /* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ -#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ -#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ -#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ /* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ /* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ /* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ -#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ -#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ -/*@} end of group CMSIS_SysTick */ + /*@} end of group CMSIS_SysTick */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) \brief Type definitions for the Instrumentation Trace Macrocell (ITM) @{ */ -/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + /** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). */ -typedef struct -{ - __O union - { - __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864]; - __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15]; - __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15]; - __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29]; - __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43]; - __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6]; - __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; + typedef struct + { + __O union + { + __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT[32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ + } ITM_Type; /* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ /* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ -#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ +#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ -#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ +#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ -#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ -#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ -#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ -#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ -#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ -#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ /* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ /* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ /* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ /* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ -#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ -#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ -/*@}*/ /* end of group CMSIS_ITM */ + /*@}*/ /* end of group CMSIS_ITM */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) \brief Type definitions for the Data Watchpoint and Trace (DWT) @{ */ -/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + /** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1]; - __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1]; - __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1]; - __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; + typedef struct + { + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1]; + __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1]; + __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1]; + __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + } DWT_Type; /* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ +#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ -#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ +#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ -#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ +#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ -#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ +#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ -#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ +#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ -#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ +#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ -#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ +#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ -#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ +#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ -#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ +#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ -#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ +#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ -#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ +#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ -#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ +#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ -#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ +#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ -#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ +#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ -#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ +#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ -#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ +#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ -#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ +#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ -#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ +#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ /* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ +#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ /* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ +#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ /* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ /* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ +#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ /* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ /* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ +#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ /* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ +#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ -#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ +#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ -#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ +#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ -#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ +#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ -#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ +#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ -#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ +#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ -#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ +#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ -#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ +#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ -#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ +#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ -/*@}*/ /* end of group CMSIS_DWT */ + /*@}*/ /* end of group CMSIS_DWT */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_TPI Trace Port Interface (TPI) \brief Type definitions for the Trace Port Interface (TPI) @{ */ -/** \brief Structure type to access the Trace Port Interface Register (TPI). + /** \brief Structure type to access the Trace Port Interface Register (TPI). */ -typedef struct -{ - __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2]; - __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55]; - __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131]; - __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759]; - __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ - __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1]; - __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39]; - __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8]; - __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; + typedef struct + { + __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2]; + __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55]; + __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131]; + __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759]; + __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1]; + __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39]; + __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8]; + __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ + } TPI_Type; /* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ +#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ /* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ +#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ /* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ +#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ -#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ +#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ -#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ +#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ -#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ +#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ /* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ +#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ -#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ +#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ /* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ +#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ /* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ -#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ +#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ -#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ -#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ +#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ -#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ +#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ -#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ +#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ -#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ +#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ /* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ -#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ +#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ /* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ -#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ +#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ -#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ -#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ +#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ -#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ +#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ -#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ +#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ -#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ +#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ /* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ -#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ +#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ /* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ +#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ /* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ +#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ -#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ +#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ -#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ +#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ -#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ +#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ -#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ +#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ -#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ +#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ /* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ +#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ -#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ +#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + /*@}*/ /* end of group CMSIS_TPI */ #if (__MPU_PRESENT == 1) -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_MPU Memory Protection Unit (MPU) \brief Type definitions for the Memory Protection Unit (MPU) @{ */ -/** \brief Structure type to access the Memory Protection Unit (MPU). + /** \brief Structure type to access the Memory Protection Unit (MPU). */ -typedef struct -{ - __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; + typedef struct + { + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ + } MPU_Type; /* MPU Type Register */ -#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ -#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ -#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ /* MPU Control Register */ -#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ -#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ -#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ /* MPU Region Number Register */ -#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ /* MPU Region Base Address Register */ -#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ -#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ -#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ /* MPU Region Attribute and Size Register */ -#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ -#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ -#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ -#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ -#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ -#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ -#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ -#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ -#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ -#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ /*@} end of group CMSIS_MPU */ #endif - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) \brief Type definitions for the Core Debug Registers @{ */ -/** \brief Structure type to access the Core Debug Register (CoreDebug). + /** \brief Structure type to access the Core Debug Register (CoreDebug). */ -typedef struct -{ - __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; + typedef struct + { + __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + } CoreDebug_Type; /* Debug Halting Control and Status Register */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ -#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ -#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ -#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ -#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ -#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ /* Debug Core Register Selector Register */ -#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ -#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ /* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ -#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ -#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ -#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ -#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ -#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ -#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ -#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ /*@} end of group CMSIS_CoreDebug */ - /** \ingroup CMSIS_core_register \defgroup CMSIS_core_base Core Definitions \brief Definitions for base addresses, unions, and structures. @@ -1251,34 +1235,32 @@ typedef struct */ /* Memory mapping of Cortex-M3 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ +#define SCnSCB ((SCnSCB_Type *)SCS_BASE) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *)SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *)SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *)NVIC_BASE) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *)ITM_BASE) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *)DWT_BASE) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *)TPI_BASE) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *)CoreDebug_BASE) /*!< Core Debug configuration struct */ #if (__MPU_PRESENT == 1) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ +#define MPU ((MPU_Type *)MPU_BASE) /*!< Memory Protection Unit */ #endif -/*@} */ + /*@} */ - - -/******************************************************************************* + /******************************************************************************* * Hardware Abstraction Layer Core Function Interface contains: - Core NVIC Functions @@ -1286,19 +1268,17 @@ typedef struct - Core Debug Functions - Core Register Access Functions ******************************************************************************/ -/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference + /** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference */ - - -/* ########################## NVIC functions #################################### */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ########################## NVIC functions #################################### */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_NVICFunctions NVIC Functions \brief Functions that manage interrupts and exceptions via the NVIC. @{ */ -/** \brief Set Priority Grouping + /** \brief Set Priority Grouping The function sets the priority grouping field using the required unlock sequence. The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. @@ -1308,57 +1288,53 @@ typedef struct \param [in] PriorityGroup Priority grouping field. */ -__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + __STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) + { + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; + } - -/** \brief Get Priority Grouping + /** \brief Get Priority Grouping The function reads the priority grouping field from the NVIC Interrupt Controller. \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). */ -__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) -{ - return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ -} + __STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) + { + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ + } - -/** \brief Enable External Interrupt + /** \brief Enable External Interrupt The function enables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ -} + __STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) + { + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* enable interrupt */ + } - -/** \brief Disable External Interrupt + /** \brief Disable External Interrupt The function disables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ -} + __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) + { + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* disable interrupt */ + } - -/** \brief Get Pending Interrupt + /** \brief Get Pending Interrupt The function reads the pending register in the NVIC and returns the pending bit for the specified interrupt. @@ -1368,37 +1344,34 @@ __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) \return 0 Interrupt status is not pending. \return 1 Interrupt status is pending. */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ -} + __STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) + { + return ((uint32_t)((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn)&0x1F))) ? 1 : 0)); /* Return 1 if pending else 0 */ + } - -/** \brief Set Pending Interrupt + /** \brief Set Pending Interrupt The function sets the pending bit of an external interrupt. \param [in] IRQn Interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ -} + __STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) + { + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* set interrupt pending */ + } - -/** \brief Clear Pending Interrupt + /** \brief Clear Pending Interrupt The function clears the pending bit of an external interrupt. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ -} + __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) + { + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* Clear pending interrupt */ + } - -/** \brief Get Active Interrupt + /** \brief Get Active Interrupt The function reads the active register in NVIC and returns the active bit. @@ -1407,13 +1380,12 @@ __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) \return 0 Interrupt status is not active. \return 1 Interrupt status is active. */ -__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ -} + __STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) + { + return ((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn)&0x1F))) ? 1 : 0)); /* Return 1 if active else 0 */ + } - -/** \brief Set Interrupt Priority + /** \brief Set Interrupt Priority The function sets the priority of an interrupt. @@ -1422,16 +1394,19 @@ __STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) \param [in] IRQn Interrupt number. \param [in] priority Priority to set. */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if(IRQn < 0) { - SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */ - else { - NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ -} + __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) + { + if (IRQn < 0) + { + SCB->SHP[((uint32_t)(IRQn)&0xF) - 4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); + } /* set Priority for Cortex-M System Interrupts */ + else + { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); + } /* set Priority for device specific Interrupts */ + } - -/** \brief Get Interrupt Priority + /** \brief Get Interrupt Priority The function reads the priority of an interrupt. The interrupt number can be positive to specify an external (device specific) @@ -1442,17 +1417,20 @@ __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ + __STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) + { - if(IRQn < 0) { - return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */ - else { - return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ -} + if (IRQn < 0) + { + return ((uint32_t)(SCB->SHP[((uint32_t)(IRQn)&0xF) - 4] >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for Cortex-M system interrupts */ + else + { + return ((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for device specific interrupts */ + } - -/** \brief Encode Priority + /** \brief Encode Priority The function encodes the priority for an interrupt with the given priority group, preemptive priority value, and subpriority value. @@ -1464,23 +1442,21 @@ __STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) \param [in] SubPriority Subpriority value (starting from 0). \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; + __STATIC_INLINE uint32_t NVIC_EncodePriority(uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) + { + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - return ( - ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | - ((SubPriority & ((1 << (SubPriorityBits )) - 1))) - ); -} + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits)) - 1)))); + } - -/** \brief Decode Priority + /** \brief Decode Priority The function decodes an interrupt priority value with a given priority group to preemptive priority value and subpriority value. @@ -1492,41 +1468,39 @@ __STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t P \param [out] pPreemptPriority Preemptive priority value (starting from 0). \param [out] pSubPriority Subpriority value (starting from 0). */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; + __STATIC_INLINE void NVIC_DecodePriority(uint32_t Priority, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) + { + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); - *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); -} + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority) & ((1 << (SubPriorityBits)) - 1); + } - -/** \brief System Reset + /** \brief System Reset The function initiates a system reset request to reset the MCU. */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included + __STATIC_INLINE void NVIC_SystemReset(void) + { + __DSB(); /* Ensure all outstanding memory accesses included buffered write are completed before reset */ - SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - while(1); /* wait until reset */ -} + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while (1) + ; /* wait until reset */ + } -/*@} end of CMSIS_Core_NVICFunctions */ + /*@} end of CMSIS_Core_NVICFunctions */ - - -/* ################################## SysTick function ############################################ */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ################################## SysTick function ############################################ */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_SysTickFunctions SysTick Functions \brief Functions that configure the System. @{ @@ -1534,7 +1508,7 @@ __STATIC_INLINE void NVIC_SystemReset(void) #if (__Vendor_SysTickConfig == 0) -/** \brief System Tick Configuration + /** \brief System Tick Configuration The function initializes the System Timer and its interrupt, and starts the System Tick Timer. Counter is in free running mode to generate periodic interrupts. @@ -1549,37 +1523,35 @@ __STATIC_INLINE void NVIC_SystemReset(void) must contain a vendor-specific implementation of this function. */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) + { + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) + return (1); /* Reload value impossible */ - SysTick->LOAD = ticks - 1; /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0); /* Function successful */ -} + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority(SysTick_IRQn, (1 << __NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ + } #endif -/*@} end of CMSIS_Core_SysTickFunctions */ + /*@} end of CMSIS_Core_SysTickFunctions */ - - -/* ##################################### Debug In/Output function ########################################### */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ##################################### Debug In/Output function ########################################### */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_core_DebugFunctions ITM Functions \brief Functions that access the ITM debug interface. @{ */ -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - -/** \brief ITM Send Character + /** \brief ITM Send Character The function transmits a character via the ITM channel 0, and \li Just returns when no debugger is connected that has booked the output. @@ -1589,57 +1561,59 @@ extern volatile int32_t ITM_RxBuffer; /*!< External variable \returns Character to transmit. */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ - (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0].u32 == 0); - ITM->PORT[0].u8 = (uint8_t) ch; - } - return (ch); -} + __STATIC_INLINE uint32_t ITM_SendChar(uint32_t ch) + { + if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1UL << 0))) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0) + ; + ITM->PORT[0].u8 = (uint8_t)ch; + } + return (ch); + } - -/** \brief ITM Receive Character + /** \brief ITM Receive Character The function inputs a character via the external variable \ref ITM_RxBuffer. \return Received character. \return -1 No character pending. */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) { - int32_t ch = -1; /* no character available */ + __STATIC_INLINE int32_t ITM_ReceiveChar(void) + { + int32_t ch = -1; /* no character available */ - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } - return (ch); -} + return (ch); + } - -/** \brief ITM Check Character + /** \brief ITM Check Character The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. \return 0 No character available. \return 1 Character available. */ -__STATIC_INLINE int32_t ITM_CheckChar (void) { - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { - return (0); /* no character available */ - } else { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - + __STATIC_INLINE int32_t ITM_CheckChar(void) + { + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } + } + /*@} end of CMSIS_core_DebugFunctions */ #ifdef __cplusplus } diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm4.h b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm4.h index bb6be1305d..178cf5b3ea 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm4.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm4.h @@ -1,4 +1,4 @@ -/**************************************************************************//** +/**************************************************************************/ /** * @file core_cm4.h * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File * @version V4.00 @@ -34,16 +34,16 @@ POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ +#if defined(__ICCARM__) +#pragma system_include /* treat file as system include file for MISRA check */ #endif #ifndef __CORE_CM4_H_GENERIC #define __CORE_CM4_H_GENERIC #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions @@ -59,7 +59,6 @@ Function-like macros are used to allow more efficient code. */ - /******************************************************************************* * CMSIS definitions ******************************************************************************/ @@ -68,126 +67,125 @@ */ /* CMSIS CM4 definitions */ -#define __CM4_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ -#define __CM4_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ -#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \ - __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ +#define __CM4_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \ + __CM4_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ -#define __CORTEX_M (0x04) /*!< Cortex-M Core */ +#define __CORTEX_M (0x04) /*!< Cortex-M Core */ +#if defined(__CC_ARM) +#define __ASM __asm /*!< asm keyword for ARM Compiler */ +#define __INLINE __inline /*!< inline keyword for ARM Compiler */ +#define __STATIC_INLINE static __inline -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline +#elif defined(__GNUC__) +#define __ASM __asm /*!< asm keyword for GNU Compiler */ +#define __INLINE inline /*!< inline keyword for GNU Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__ICCARM__) +#define __ASM __asm /*!< asm keyword for IAR Compiler */ +#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ +#define __STATIC_INLINE static inline -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline +#elif defined(__TMS470__) +#define __ASM __asm /*!< asm keyword for TI CCS Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__TASKING__) +#define __ASM __asm /*!< asm keyword for TASKING Compiler */ +#define __INLINE inline /*!< inline keyword for TASKING Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__CSMC__) +#define __packed +#define __ASM _asm /*!< asm keyword for COSMIC Compiler */ +#define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ +#define __STATIC_INLINE static inline #endif /** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. */ -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI_VFP_SUPPORT__ - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __CSMC__ ) /* Cosmic */ - #if ( __CSMC__ & 0x400) // FPU present for parser - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif +#if defined(__CC_ARM) +#if defined __TARGET_FPU_VFP +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 #endif -#include /* standard types definitions */ -#include /* Core Instruction Access */ -#include /* Core Function Access */ -#include /* Compiler specific SIMD Intrinsics */ +#elif defined(__GNUC__) +#if defined(__VFP_FP__) && !defined(__SOFTFP__) +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif + +#elif defined(__ICCARM__) +#if defined __ARMVFP__ +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif + +#elif defined(__TMS470__) +#if defined __TI_VFP_SUPPORT__ +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif + +#elif defined(__TASKING__) +#if defined __FPU_VFP__ +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif + +#elif defined(__CSMC__) /* Cosmic */ +#if (__CSMC__ & 0x400) // FPU present for parser +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ +#include /* Compiler specific SIMD Intrinsics */ #ifdef __cplusplus } @@ -201,35 +199,36 @@ #define __CORE_CM4_H_DEPENDANT #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /* check device defines and use defaults */ #if defined __CHECK_DEVICE_DEFINES - #ifndef __CM4_REV - #define __CM4_REV 0x0000 - #warning "__CM4_REV not defined in device header file; using default!" - #endif +#ifndef __CM4_REV +#define __CM4_REV 0x0000 +#warning "__CM4_REV not defined in device header file; using default!" +#endif - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0 - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif +#ifndef __FPU_PRESENT +#define __FPU_PRESENT 0 +#warning "__FPU_PRESENT not defined in device header file; using default!" +#endif - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0 - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif +#ifndef __MPU_PRESENT +#define __MPU_PRESENT 0 +#warning "__MPU_PRESENT not defined in device header file; using default!" +#endif - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 4 - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif +#ifndef __NVIC_PRIO_BITS +#define __NVIC_PRIO_BITS 4 +#warning "__NVIC_PRIO_BITS not defined in device header file; using default!" +#endif - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0 - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif +#ifndef __Vendor_SysTickConfig +#define __Vendor_SysTickConfig 0 +#warning "__Vendor_SysTickConfig not defined in device header file; using default!" +#endif #endif /* IO definitions (access restrictions to peripheral registers) */ @@ -241,18 +240,16 @@ \li for automatic generation of peripheral register debug information. */ #ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ +#define __I volatile /*!< Defines 'read only' permissions */ #else - #define __I volatile const /*!< Defines 'read only' permissions */ +#define __I volatile const /*!< Defines 'read only' permissions */ #endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ -/*@} end of group Cortex_M4 */ + /*@} end of group Cortex_M4 */ - - -/******************************************************************************* + /******************************************************************************* * Register Abstraction Core Register contain: - Core Register @@ -263,1133 +260,1119 @@ - Core MPU Register - Core FPU Register ******************************************************************************/ -/** \defgroup CMSIS_core_register Defines and Type Definitions + /** \defgroup CMSIS_core_register Defines and Type Definitions \brief Type definitions and defines for Cortex-M processor based devices. */ -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_CORE Status and Control Registers \brief Core Register type definitions. @{ */ -/** \brief Union type to access the Application Program Status Register (APSR). + /** \brief Union type to access the Application Program Status Register (APSR). */ -typedef union -{ - struct - { + typedef union + { + struct + { #if (__CORTEX_M != 0x04) - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t _reserved0 : 27; /*!< bit: 0..26 Reserved */ #else - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t _reserved0 : 16; /*!< bit: 0..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 7; /*!< bit: 20..26 Reserved */ #endif - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } APSR_Type; - -/** \brief Union type to access the Interrupt Program Status Register (IPSR). + /** \brief Union type to access the Interrupt Program Status Register (IPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0 : 23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } IPSR_Type; - -/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + /** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ #if (__CORTEX_M != 0x04) - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t _reserved0 : 15; /*!< bit: 9..23 Reserved */ #else - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t _reserved0 : 7; /*!< bit: 9..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 4; /*!< bit: 20..23 Reserved */ #endif - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; + uint32_t T : 1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT : 2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } xPSR_Type; - -/** \brief Union type to access the Control Registers (CONTROL). + /** \brief Union type to access the Control Registers (CONTROL). */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; + typedef union + { + struct + { + uint32_t nPRIV : 1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL : 1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA : 1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0 : 29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } CONTROL_Type; -/*@} end of group CMSIS_CORE */ + /*@} end of group CMSIS_CORE */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) \brief Type definitions for the NVIC Registers @{ */ -/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + /** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). */ -typedef struct -{ - __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24]; - __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24]; - __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24]; - __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24]; - __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56]; - __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644]; - __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; + typedef struct + { + __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ + } NVIC_Type; /* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ +#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ -/*@} end of group CMSIS_NVIC */ + /*@} end of group CMSIS_NVIC */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SCB System Control Block (SCB) \brief Type definitions for the System Control Block Registers @{ */ -/** \brief Structure type to access the System Control Block (SCB). + /** \brief Structure type to access the System Control Block (SCB). */ -typedef struct -{ - __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5]; - __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ -} SCB_Type; + typedef struct + { + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5]; + __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + } SCB_Type; /* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ -#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ -#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ -#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ -#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ /* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ -#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ -#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ -#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ -#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ -#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ -#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ -#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ -#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ -#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ /* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ /* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ -#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ -#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ -#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ -#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ -#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ /* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ -#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ -#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ /* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ -#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ -#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ -#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ -#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ -#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ /* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ -#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ -#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ -#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ -#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ -#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ -#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ -#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ -#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ -#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ -#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ /* SCB Configurable Fault Status Registers Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ -#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ -#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ /* SCB Hard Fault Status Registers Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ -#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ -#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ /* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ -#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ -#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ -#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ -#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ -/*@} end of group CMSIS_SCB */ + /*@} end of group CMSIS_SCB */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) \brief Type definitions for the System Control and ID Register not in the SCB @{ */ -/** \brief Structure type to access the System Control and ID Register not in the SCB. + /** \brief Structure type to access the System Control and ID Register not in the SCB. */ -typedef struct -{ - uint32_t RESERVED0[1]; - __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; + typedef struct + { + uint32_t RESERVED0[1]; + __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + } SCnSCB_Type; /* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ /* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */ -#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ -#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */ -#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ +#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ -#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ -#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */ -#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ -/*@} end of group CMSIS_SCnotSCB */ + /*@} end of group CMSIS_SCnotSCB */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SysTick System Tick Timer (SysTick) \brief Type definitions for the System Timer Registers. @{ */ -/** \brief Structure type to access the System Timer (SysTick). + /** \brief Structure type to access the System Timer (SysTick). */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; + typedef struct + { + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ + } SysTick_Type; /* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ -#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ -#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ -#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ /* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ /* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ /* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ -#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ -#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ -/*@} end of group CMSIS_SysTick */ + /*@} end of group CMSIS_SysTick */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) \brief Type definitions for the Instrumentation Trace Macrocell (ITM) @{ */ -/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + /** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). */ -typedef struct -{ - __O union - { - __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864]; - __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15]; - __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15]; - __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29]; - __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43]; - __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6]; - __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; + typedef struct + { + __O union + { + __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT[32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ + } ITM_Type; /* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ /* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ -#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ +#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ -#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ +#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ -#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ -#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ -#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ -#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ -#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ -#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ /* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ /* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ /* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ /* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ -#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ -#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ -/*@}*/ /* end of group CMSIS_ITM */ + /*@}*/ /* end of group CMSIS_ITM */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) \brief Type definitions for the Data Watchpoint and Trace (DWT) @{ */ -/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + /** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1]; - __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1]; - __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1]; - __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; + typedef struct + { + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1]; + __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1]; + __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1]; + __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + } DWT_Type; /* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ +#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ -#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ +#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ -#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ +#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ -#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ +#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ -#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ +#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ -#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ +#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ -#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ +#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ -#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ +#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ -#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ +#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ -#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ +#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ -#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ +#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ -#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ +#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ -#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ +#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ -#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ +#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ -#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ +#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ -#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ +#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ -#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ +#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ -#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ +#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ /* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ +#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ /* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ +#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ /* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ /* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ +#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ /* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ /* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ +#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ /* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ +#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ -#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ +#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ -#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ +#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ -#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ +#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ -#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ +#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ -#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ +#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ -#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ +#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ -#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ +#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ -#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ +#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ -/*@}*/ /* end of group CMSIS_DWT */ + /*@}*/ /* end of group CMSIS_DWT */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_TPI Trace Port Interface (TPI) \brief Type definitions for the Trace Port Interface (TPI) @{ */ -/** \brief Structure type to access the Trace Port Interface Register (TPI). + /** \brief Structure type to access the Trace Port Interface Register (TPI). */ -typedef struct -{ - __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2]; - __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55]; - __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131]; - __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759]; - __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ - __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1]; - __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39]; - __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8]; - __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; + typedef struct + { + __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2]; + __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55]; + __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131]; + __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759]; + __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1]; + __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39]; + __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8]; + __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ + } TPI_Type; /* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ +#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ /* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ +#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ /* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ +#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ -#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ +#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ -#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ +#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ -#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ +#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ /* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ +#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ -#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ +#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ /* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ +#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ /* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ -#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ +#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ -#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ -#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ +#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ -#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ +#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ -#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ +#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ -#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ +#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ /* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ -#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ +#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ /* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ -#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ +#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ -#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ -#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ +#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ -#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ +#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ -#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ +#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ -#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ +#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ /* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ -#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ +#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ /* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ +#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ /* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ +#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ -#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ +#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ -#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ +#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ -#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ +#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ -#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ +#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ -#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ +#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ /* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ +#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ -#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ +#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + /*@}*/ /* end of group CMSIS_TPI */ #if (__MPU_PRESENT == 1) -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_MPU Memory Protection Unit (MPU) \brief Type definitions for the Memory Protection Unit (MPU) @{ */ -/** \brief Structure type to access the Memory Protection Unit (MPU). + /** \brief Structure type to access the Memory Protection Unit (MPU). */ -typedef struct -{ - __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; + typedef struct + { + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ + } MPU_Type; /* MPU Type Register */ -#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ -#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ -#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ /* MPU Control Register */ -#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ -#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ -#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ /* MPU Region Number Register */ -#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ /* MPU Region Base Address Register */ -#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ -#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ -#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ /* MPU Region Attribute and Size Register */ -#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ -#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ -#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ -#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ -#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ -#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ -#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ -#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ -#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ -#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ /*@} end of group CMSIS_MPU */ #endif - #if (__FPU_PRESENT == 1) -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_FPU Floating Point Unit (FPU) \brief Type definitions for the Floating Point Unit (FPU) @{ */ -/** \brief Structure type to access the Floating Point Unit (FPU). + /** \brief Structure type to access the Floating Point Unit (FPU). */ -typedef struct -{ - uint32_t RESERVED0[1]; - __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ -} FPU_Type; + typedef struct + { + uint32_t RESERVED0[1]; + __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + } FPU_Type; /* Floating-Point Context Control Register */ -#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ +#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ -#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ +#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ -#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ +#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ -#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ +#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ -#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ +#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ -#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ +#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ -#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ +#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ -#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ +#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ -#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */ +#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */ /* Floating-Point Context Address Register */ -#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ +#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ /* Floating-Point Default Status Control Register */ -#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ +#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ -#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ +#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ -#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ +#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ -#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ +#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ /* Media and FP Feature Register 0 */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ -#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ +#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ -#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ +#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ -#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ +#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ -#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ +#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ -#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ +#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ -#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ +#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ -#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */ +#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */ /* Media and FP Feature Register 1 */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ -#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ +#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ -#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ +#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ -#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */ +#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */ /*@} end of group CMSIS_FPU */ #endif - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) \brief Type definitions for the Core Debug Registers @{ */ -/** \brief Structure type to access the Core Debug Register (CoreDebug). + /** \brief Structure type to access the Core Debug Register (CoreDebug). */ -typedef struct -{ - __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; + typedef struct + { + __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + } CoreDebug_Type; /* Debug Halting Control and Status Register */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ -#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ -#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ -#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ -#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ -#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ /* Debug Core Register Selector Register */ -#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ -#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ /* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ -#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ -#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ -#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ -#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ -#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ -#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ -#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ /*@} end of group CMSIS_CoreDebug */ - /** \ingroup CMSIS_core_register \defgroup CMSIS_core_base Core Definitions \brief Definitions for base addresses, unions, and structures. @@ -1397,39 +1380,37 @@ typedef struct */ /* Memory mapping of Cortex-M4 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ +#define SCnSCB ((SCnSCB_Type *)SCS_BASE) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *)SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *)SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *)NVIC_BASE) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *)ITM_BASE) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *)DWT_BASE) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *)TPI_BASE) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *)CoreDebug_BASE) /*!< Core Debug configuration struct */ #if (__MPU_PRESENT == 1) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ +#define MPU ((MPU_Type *)MPU_BASE) /*!< Memory Protection Unit */ #endif #if (__FPU_PRESENT == 1) - #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ - #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *)FPU_BASE) /*!< Floating Point Unit */ #endif -/*@} */ + /*@} */ - - -/******************************************************************************* + /******************************************************************************* * Hardware Abstraction Layer Core Function Interface contains: - Core NVIC Functions @@ -1437,19 +1418,17 @@ typedef struct - Core Debug Functions - Core Register Access Functions ******************************************************************************/ -/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference + /** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference */ - - -/* ########################## NVIC functions #################################### */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ########################## NVIC functions #################################### */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_NVICFunctions NVIC Functions \brief Functions that manage interrupts and exceptions via the NVIC. @{ */ -/** \brief Set Priority Grouping + /** \brief Set Priority Grouping The function sets the priority grouping field using the required unlock sequence. The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. @@ -1459,58 +1438,54 @@ typedef struct \param [in] PriorityGroup Priority grouping field. */ -__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + __STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) + { + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; + } - -/** \brief Get Priority Grouping + /** \brief Get Priority Grouping The function reads the priority grouping field from the NVIC Interrupt Controller. \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). */ -__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) -{ - return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ -} + __STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) + { + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ + } - -/** \brief Enable External Interrupt + /** \brief Enable External Interrupt The function enables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ -/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */ - NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */ -} + __STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) + { + /* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */ + NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */ + } - -/** \brief Disable External Interrupt + /** \brief Disable External Interrupt The function disables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ -} + __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) + { + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* disable interrupt */ + } - -/** \brief Get Pending Interrupt + /** \brief Get Pending Interrupt The function reads the pending register in the NVIC and returns the pending bit for the specified interrupt. @@ -1520,37 +1495,34 @@ __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) \return 0 Interrupt status is not pending. \return 1 Interrupt status is pending. */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ -} + __STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) + { + return ((uint32_t)((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn)&0x1F))) ? 1 : 0)); /* Return 1 if pending else 0 */ + } - -/** \brief Set Pending Interrupt + /** \brief Set Pending Interrupt The function sets the pending bit of an external interrupt. \param [in] IRQn Interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ -} + __STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) + { + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* set interrupt pending */ + } - -/** \brief Clear Pending Interrupt + /** \brief Clear Pending Interrupt The function clears the pending bit of an external interrupt. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ -} + __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) + { + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* Clear pending interrupt */ + } - -/** \brief Get Active Interrupt + /** \brief Get Active Interrupt The function reads the active register in NVIC and returns the active bit. @@ -1559,13 +1531,12 @@ __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) \return 0 Interrupt status is not active. \return 1 Interrupt status is active. */ -__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ -} + __STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) + { + return ((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn)&0x1F))) ? 1 : 0)); /* Return 1 if active else 0 */ + } - -/** \brief Set Interrupt Priority + /** \brief Set Interrupt Priority The function sets the priority of an interrupt. @@ -1574,16 +1545,19 @@ __STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) \param [in] IRQn Interrupt number. \param [in] priority Priority to set. */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if(IRQn < 0) { - SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */ - else { - NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ -} + __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) + { + if (IRQn < 0) + { + SCB->SHP[((uint32_t)(IRQn)&0xF) - 4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); + } /* set Priority for Cortex-M System Interrupts */ + else + { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); + } /* set Priority for device specific Interrupts */ + } - -/** \brief Get Interrupt Priority + /** \brief Get Interrupt Priority The function reads the priority of an interrupt. The interrupt number can be positive to specify an external (device specific) @@ -1594,17 +1568,20 @@ __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ + __STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) + { - if(IRQn < 0) { - return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */ - else { - return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ -} + if (IRQn < 0) + { + return ((uint32_t)(SCB->SHP[((uint32_t)(IRQn)&0xF) - 4] >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for Cortex-M system interrupts */ + else + { + return ((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for device specific interrupts */ + } - -/** \brief Encode Priority + /** \brief Encode Priority The function encodes the priority for an interrupt with the given priority group, preemptive priority value, and subpriority value. @@ -1616,23 +1593,21 @@ __STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) \param [in] SubPriority Subpriority value (starting from 0). \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; + __STATIC_INLINE uint32_t NVIC_EncodePriority(uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) + { + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - return ( - ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | - ((SubPriority & ((1 << (SubPriorityBits )) - 1))) - ); -} + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits)) - 1)))); + } - -/** \brief Decode Priority + /** \brief Decode Priority The function decodes an interrupt priority value with a given priority group to preemptive priority value and subpriority value. @@ -1644,41 +1619,39 @@ __STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t P \param [out] pPreemptPriority Preemptive priority value (starting from 0). \param [out] pSubPriority Subpriority value (starting from 0). */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; + __STATIC_INLINE void NVIC_DecodePriority(uint32_t Priority, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) + { + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); - *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); -} + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority) & ((1 << (SubPriorityBits)) - 1); + } - -/** \brief System Reset + /** \brief System Reset The function initiates a system reset request to reset the MCU. */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included + __STATIC_INLINE void NVIC_SystemReset(void) + { + __DSB(); /* Ensure all outstanding memory accesses included buffered write are completed before reset */ - SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - while(1); /* wait until reset */ -} + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while (1) + ; /* wait until reset */ + } -/*@} end of CMSIS_Core_NVICFunctions */ + /*@} end of CMSIS_Core_NVICFunctions */ - - -/* ################################## SysTick function ############################################ */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ################################## SysTick function ############################################ */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_SysTickFunctions SysTick Functions \brief Functions that configure the System. @{ @@ -1686,7 +1659,7 @@ __STATIC_INLINE void NVIC_SystemReset(void) #if (__Vendor_SysTickConfig == 0) -/** \brief System Tick Configuration + /** \brief System Tick Configuration The function initializes the System Timer and its interrupt, and starts the System Tick Timer. Counter is in free running mode to generate periodic interrupts. @@ -1701,37 +1674,35 @@ __STATIC_INLINE void NVIC_SystemReset(void) must contain a vendor-specific implementation of this function. */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) + { + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) + return (1); /* Reload value impossible */ - SysTick->LOAD = ticks - 1; /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0); /* Function successful */ -} + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority(SysTick_IRQn, (1 << __NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ + } #endif -/*@} end of CMSIS_Core_SysTickFunctions */ + /*@} end of CMSIS_Core_SysTickFunctions */ - - -/* ##################################### Debug In/Output function ########################################### */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ##################################### Debug In/Output function ########################################### */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_core_DebugFunctions ITM Functions \brief Functions that access the ITM debug interface. @{ */ -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - -/** \brief ITM Send Character + /** \brief ITM Send Character The function transmits a character via the ITM channel 0, and \li Just returns when no debugger is connected that has booked the output. @@ -1741,57 +1712,59 @@ extern volatile int32_t ITM_RxBuffer; /*!< External variable \returns Character to transmit. */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ - (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0].u32 == 0); - ITM->PORT[0].u8 = (uint8_t) ch; - } - return (ch); -} + __STATIC_INLINE uint32_t ITM_SendChar(uint32_t ch) + { + if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1UL << 0))) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0) + ; + ITM->PORT[0].u8 = (uint8_t)ch; + } + return (ch); + } - -/** \brief ITM Receive Character + /** \brief ITM Receive Character The function inputs a character via the external variable \ref ITM_RxBuffer. \return Received character. \return -1 No character pending. */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) { - int32_t ch = -1; /* no character available */ + __STATIC_INLINE int32_t ITM_ReceiveChar(void) + { + int32_t ch = -1; /* no character available */ - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } - return (ch); -} + return (ch); + } - -/** \brief ITM Check Character + /** \brief ITM Check Character The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. \return 0 No character available. \return 1 Character available. */ -__STATIC_INLINE int32_t ITM_CheckChar (void) { - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { - return (0); /* no character available */ - } else { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - + __STATIC_INLINE int32_t ITM_CheckChar(void) + { + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } + } + /*@} end of CMSIS_core_DebugFunctions */ #ifdef __cplusplus } diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm7.h b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm7.h index 242540f8b1..265d3bc735 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm7.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cm7.h @@ -1,4 +1,4 @@ -/**************************************************************************//** +/**************************************************************************/ /** * @file core_cm7.h * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File * @version V4.00 @@ -34,16 +34,16 @@ POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ +#if defined(__ICCARM__) +#pragma system_include /* treat file as system include file for MISRA check */ #endif #ifndef __CORE_CM7_H_GENERIC #define __CORE_CM7_H_GENERIC #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions @@ -59,7 +59,6 @@ Function-like macros are used to allow more efficient code. */ - /******************************************************************************* * CMSIS definitions ******************************************************************************/ @@ -68,126 +67,125 @@ */ /* CMSIS CM7 definitions */ -#define __CM7_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ -#define __CM7_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ -#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16) | \ - __CM7_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ +#define __CM7_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16) | \ + __CM7_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ -#define __CORTEX_M (0x07) /*!< Cortex-M Core */ +#define __CORTEX_M (0x07) /*!< Cortex-M Core */ +#if defined(__CC_ARM) +#define __ASM __asm /*!< asm keyword for ARM Compiler */ +#define __INLINE __inline /*!< inline keyword for ARM Compiler */ +#define __STATIC_INLINE static __inline -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline +#elif defined(__GNUC__) +#define __ASM __asm /*!< asm keyword for GNU Compiler */ +#define __INLINE inline /*!< inline keyword for GNU Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__ICCARM__) +#define __ASM __asm /*!< asm keyword for IAR Compiler */ +#define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ +#define __STATIC_INLINE static inline -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline +#elif defined(__TMS470__) +#define __ASM __asm /*!< asm keyword for TI CCS Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__TASKING__) +#define __ASM __asm /*!< asm keyword for TASKING Compiler */ +#define __INLINE inline /*!< inline keyword for TASKING Compiler */ +#define __STATIC_INLINE static inline -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ - #define __STATIC_INLINE static inline +#elif defined(__CSMC__) +#define __packed +#define __ASM _asm /*!< asm keyword for COSMIC Compiler */ +#define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */ +#define __STATIC_INLINE static inline #endif /** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. */ -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI_VFP_SUPPORT__ - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif - -#elif defined ( __CSMC__ ) /* Cosmic */ - #if ( __CSMC__ & 0x400) // FPU present for parser - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1 - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0 - #endif - #else - #define __FPU_USED 0 - #endif +#if defined(__CC_ARM) +#if defined __TARGET_FPU_VFP +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 #endif -#include /* standard types definitions */ -#include /* Core Instruction Access */ -#include /* Core Function Access */ -#include /* Compiler specific SIMD Intrinsics */ +#elif defined(__GNUC__) +#if defined(__VFP_FP__) && !defined(__SOFTFP__) +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif + +#elif defined(__ICCARM__) +#if defined __ARMVFP__ +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif + +#elif defined(__TMS470__) +#if defined __TI_VFP_SUPPORT__ +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif + +#elif defined(__TASKING__) +#if defined __FPU_VFP__ +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif + +#elif defined(__CSMC__) /* Cosmic */ +#if (__CSMC__ & 0x400) // FPU present for parser +#if (__FPU_PRESENT == 1) +#define __FPU_USED 1 +#else +#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" +#define __FPU_USED 0 +#endif +#else +#define __FPU_USED 0 +#endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ +#include /* Compiler specific SIMD Intrinsics */ #ifdef __cplusplus } @@ -201,50 +199,51 @@ #define __CORE_CM7_H_DEPENDANT #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif /* check device defines and use defaults */ #if defined __CHECK_DEVICE_DEFINES - #ifndef __CM7_REV - #define __CM7_REV 0x0000 - #warning "__CM7_REV not defined in device header file; using default!" - #endif +#ifndef __CM7_REV +#define __CM7_REV 0x0000 +#warning "__CM7_REV not defined in device header file; using default!" +#endif - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0 - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif +#ifndef __FPU_PRESENT +#define __FPU_PRESENT 0 +#warning "__FPU_PRESENT not defined in device header file; using default!" +#endif - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0 - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif +#ifndef __MPU_PRESENT +#define __MPU_PRESENT 0 +#warning "__MPU_PRESENT not defined in device header file; using default!" +#endif - #ifndef __ICACHE_PRESENT - #define __ICACHE_PRESENT 0 - #warning "__ICACHE_PRESENT not defined in device header file; using default!" - #endif +#ifndef __ICACHE_PRESENT +#define __ICACHE_PRESENT 0 +#warning "__ICACHE_PRESENT not defined in device header file; using default!" +#endif - #ifndef __DCACHE_PRESENT - #define __DCACHE_PRESENT 0 - #warning "__DCACHE_PRESENT not defined in device header file; using default!" - #endif +#ifndef __DCACHE_PRESENT +#define __DCACHE_PRESENT 0 +#warning "__DCACHE_PRESENT not defined in device header file; using default!" +#endif - #ifndef __DTCM_PRESENT - #define __DTCM_PRESENT 0 - #warning "__DTCM_PRESENT not defined in device header file; using default!" - #endif +#ifndef __DTCM_PRESENT +#define __DTCM_PRESENT 0 +#warning "__DTCM_PRESENT not defined in device header file; using default!" +#endif - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3 - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif +#ifndef __NVIC_PRIO_BITS +#define __NVIC_PRIO_BITS 3 +#warning "__NVIC_PRIO_BITS not defined in device header file; using default!" +#endif - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0 - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif +#ifndef __Vendor_SysTickConfig +#define __Vendor_SysTickConfig 0 +#warning "__Vendor_SysTickConfig not defined in device header file; using default!" +#endif #endif /* IO definitions (access restrictions to peripheral registers) */ @@ -256,18 +255,16 @@ \li for automatic generation of peripheral register debug information. */ #ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ +#define __I volatile /*!< Defines 'read only' permissions */ #else - #define __I volatile const /*!< Defines 'read only' permissions */ +#define __I volatile const /*!< Defines 'read only' permissions */ #endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ -/*@} end of group Cortex_M7 */ + /*@} end of group Cortex_M7 */ - - -/******************************************************************************* + /******************************************************************************* * Register Abstraction Core Register contain: - Core Register @@ -278,1305 +275,1291 @@ - Core MPU Register - Core FPU Register ******************************************************************************/ -/** \defgroup CMSIS_core_register Defines and Type Definitions + /** \defgroup CMSIS_core_register Defines and Type Definitions \brief Type definitions and defines for Cortex-M processor based devices. */ -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_CORE Status and Control Registers \brief Core Register type definitions. @{ */ -/** \brief Union type to access the Application Program Status Register (APSR). + /** \brief Union type to access the Application Program Status Register (APSR). */ -typedef union -{ - struct - { + typedef union + { + struct + { #if (__CORTEX_M != 0x07) - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t _reserved0 : 27; /*!< bit: 0..26 Reserved */ #else - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t _reserved0 : 16; /*!< bit: 0..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 7; /*!< bit: 20..26 Reserved */ #endif - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } APSR_Type; - -/** \brief Union type to access the Interrupt Program Status Register (IPSR). + /** \brief Union type to access the Interrupt Program Status Register (IPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0 : 23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } IPSR_Type; - -/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + /** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + typedef union + { + struct + { + uint32_t ISR : 9; /*!< bit: 0.. 8 Exception number */ #if (__CORTEX_M != 0x07) - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t _reserved0 : 15; /*!< bit: 9..23 Reserved */ #else - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t _reserved0 : 7; /*!< bit: 9..15 Reserved */ + uint32_t GE : 4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1 : 4; /*!< bit: 20..23 Reserved */ #endif - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; + uint32_t T : 1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT : 2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q : 1; /*!< bit: 27 Saturation condition flag */ + uint32_t V : 1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C : 1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z : 1; /*!< bit: 30 Zero condition code flag */ + uint32_t N : 1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } xPSR_Type; - -/** \brief Union type to access the Control Registers (CONTROL). + /** \brief Union type to access the Control Registers (CONTROL). */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; + typedef union + { + struct + { + uint32_t nPRIV : 1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL : 1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA : 1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0 : 29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ + } CONTROL_Type; -/*@} end of group CMSIS_CORE */ + /*@} end of group CMSIS_CORE */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) \brief Type definitions for the NVIC Registers @{ */ -/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + /** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). */ -typedef struct -{ - __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24]; - __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24]; - __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24]; - __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24]; - __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56]; - __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644]; - __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; + typedef struct + { + __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ + } NVIC_Type; /* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ +#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ -/*@} end of group CMSIS_NVIC */ + /*@} end of group CMSIS_NVIC */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SCB System Control Block (SCB) \brief Type definitions for the System Control Block Registers @{ */ -/** \brief Structure type to access the System Control Block (SCB). + /** \brief Structure type to access the System Control Block (SCB). */ -typedef struct -{ - __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IO uint8_t SHPR[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __I uint32_t ID_PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __I uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __I uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __I uint32_t ID_MFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __I uint32_t ID_ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[1]; - __I uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ - __I uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ - __I uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ - __IO uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ - __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - uint32_t RESERVED3[93]; - __O uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ - uint32_t RESERVED4[15]; - __I uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ - __I uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ - __I uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */ - uint32_t RESERVED5[1]; - __O uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ - uint32_t RESERVED6[1]; - __O uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ - __O uint32_t DCIMVAU; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ - __O uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ - __O uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ - __O uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ - __O uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ - __O uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ - __O uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6]; - __IO uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IO uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IO uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IO uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IO uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1]; - __IO uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ -} SCB_Type; + typedef struct + { + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IO uint8_t SHPR[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __I uint32_t ID_PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __I uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __I uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __I uint32_t ID_MFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __I uint32_t ID_ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1]; + __I uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __I uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __I uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IO uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93]; + __O uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15]; + __I uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __I uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __I uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */ + uint32_t RESERVED5[1]; + __O uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1]; + __O uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __O uint32_t DCIMVAU; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __O uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __O uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __O uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __O uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __O uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __O uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6]; + __IO uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IO uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IO uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IO uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IO uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1]; + __IO uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ + } SCB_Type; /* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ -#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ -#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ -#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ -#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ /* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ -#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ -#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ -#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ -#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ -#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ -#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ -#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ -#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ -#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ /* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ /* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ -#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ -#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ -#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ -#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ -#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ /* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ -#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ -#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ /* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18 /*!< SCB CCR: Branch prediction enable bit Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ +#define SCB_CCR_BP_Pos 18 /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ -#define SCB_CCR_IC_Pos 17 /*!< SCB CCR: Instruction cache enable bit Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ +#define SCB_CCR_IC_Pos 17 /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ -#define SCB_CCR_DC_Pos 16 /*!< SCB CCR: Cache enable bit Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ +#define SCB_CCR_DC_Pos 16 /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ -#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ -#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ -#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ -#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ -#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ -#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ /* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ -#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ -#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ -#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ -#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ -#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ -#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ -#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ -#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ -#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ -#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ /* SCB Configurable Fault Status Registers Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ -#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ -#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ /* SCB Hard Fault Status Registers Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ -#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ -#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ /* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ -#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ -#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ -#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ -#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ /* Cache Level ID register */ -#define SCB_CLIDR_LOUU_Pos 27 /*!< SCB CLIDR: LoUU Position */ -#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ +#define SCB_CLIDR_LOUU_Pos 27 /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ -#define SCB_CLIDR_LOC_Pos 24 /*!< SCB CLIDR: LoC Position */ -#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_FORMAT_Pos) /*!< SCB CLIDR: LoC Mask */ +#define SCB_CLIDR_LOC_Pos 24 /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_FORMAT_Pos) /*!< SCB CLIDR: LoC Mask */ /* Cache Type register */ -#define SCB_CTR_FORMAT_Pos 29 /*!< SCB CTR: Format Position */ -#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ +#define SCB_CTR_FORMAT_Pos 29 /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ -#define SCB_CTR_CWG_Pos 24 /*!< SCB CTR: CWG Position */ -#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ +#define SCB_CTR_CWG_Pos 24 /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ -#define SCB_CTR_ERG_Pos 20 /*!< SCB CTR: ERG Position */ -#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ +#define SCB_CTR_ERG_Pos 20 /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ -#define SCB_CTR_DMINLINE_Pos 16 /*!< SCB CTR: DminLine Position */ -#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ +#define SCB_CTR_DMINLINE_Pos 16 /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ -#define SCB_CTR_IMINLINE_Pos 0 /*!< SCB CTR: ImInLine Position */ -#define SCB_CTR_IMINLINE_Msk (0xFUL << SCB_CTR_IMINLINE_Pos) /*!< SCB CTR: ImInLine Mask */ +#define SCB_CTR_IMINLINE_Pos 0 /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL << SCB_CTR_IMINLINE_Pos) /*!< SCB CTR: ImInLine Mask */ /* Cache Size ID Register */ -#define SCB_CCSIDR_WT_Pos 31 /*!< SCB CCSIDR: WT Position */ -#define SCB_CCSIDR_WT_Msk (7UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ +#define SCB_CCSIDR_WT_Pos 31 /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (7UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ -#define SCB_CCSIDR_WB_Pos 30 /*!< SCB CCSIDR: WB Position */ -#define SCB_CCSIDR_WB_Msk (7UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ +#define SCB_CCSIDR_WB_Pos 30 /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (7UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ -#define SCB_CCSIDR_RA_Pos 29 /*!< SCB CCSIDR: RA Position */ -#define SCB_CCSIDR_RA_Msk (7UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ +#define SCB_CCSIDR_RA_Pos 29 /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (7UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ -#define SCB_CCSIDR_WA_Pos 28 /*!< SCB CCSIDR: WA Position */ -#define SCB_CCSIDR_WA_Msk (7UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ +#define SCB_CCSIDR_WA_Pos 28 /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (7UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ -#define SCB_CCSIDR_NUMSETS_Pos 13 /*!< SCB CCSIDR: NumSets Position */ -#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ +#define SCB_CCSIDR_NUMSETS_Pos 13 /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ -#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3 /*!< SCB CCSIDR: Associativity Position */ -#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3 /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ -#define SCB_CCSIDR_LINESIZE_Pos 0 /*!< SCB CCSIDR: LineSize Position */ -#define SCB_CCSIDR_LINESIZE_Msk (7UL << SCB_CCSIDR_LINESIZE_Pos) /*!< SCB CCSIDR: LineSize Mask */ +#define SCB_CCSIDR_LINESIZE_Pos 0 /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL << SCB_CCSIDR_LINESIZE_Pos) /*!< SCB CCSIDR: LineSize Mask */ /* Cache Size Selection Register */ -#define SCB_CSSELR_LEVEL_Pos 0 /*!< SCB CSSELR: Level Position */ -#define SCB_CSSELR_LEVEL_Msk (1UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ +#define SCB_CSSELR_LEVEL_Pos 0 /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (1UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ -#define SCB_CSSELR_IND_Pos 0 /*!< SCB CSSELR: InD Position */ -#define SCB_CSSELR_IND_Msk (1UL << SCB_CSSELR_IND_Pos) /*!< SCB CSSELR: InD Mask */ +#define SCB_CSSELR_IND_Pos 0 /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL << SCB_CSSELR_IND_Pos) /*!< SCB CSSELR: InD Mask */ /* SCB Software Triggered Interrupt Register */ -#define SCB_STIR_INTID_Pos 0 /*!< SCB STIR: INTID Position */ -#define SCB_STIR_INTID_Msk (0x1FFUL << SCB_STIR_INTID_Pos) /*!< SCB STIR: INTID Mask */ +#define SCB_STIR_INTID_Pos 0 /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL << SCB_STIR_INTID_Pos) /*!< SCB STIR: INTID Mask */ /* Instruction Tightly-Coupled Memory Control Register*/ -#define SCB_ITCMCR_SZ_Pos 3 /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ +#define SCB_ITCMCR_SZ_Pos 3 /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ -#define SCB_ITCMCR_RETEN_Pos 2 /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1FFUL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ +#define SCB_ITCMCR_RETEN_Pos 2 /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1FFUL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ -#define SCB_ITCMCR_RMW_Pos 1 /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1FFUL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ +#define SCB_ITCMCR_RMW_Pos 1 /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1FFUL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ -#define SCB_ITCMCR_EN_Pos 0 /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1FFUL << SCB_ITCMCR_EN_Pos) /*!< SCB ITCMCR: EN Mask */ +#define SCB_ITCMCR_EN_Pos 0 /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1FFUL << SCB_ITCMCR_EN_Pos) /*!< SCB ITCMCR: EN Mask */ /* Data Tightly-Coupled Memory Control Registers */ -#define SCB_DTCMCR_SZ_Pos 3 /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ +#define SCB_DTCMCR_SZ_Pos 3 /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ -#define SCB_DTCMCR_RETEN_Pos 2 /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ +#define SCB_DTCMCR_RETEN_Pos 2 /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ -#define SCB_DTCMCR_RMW_Pos 1 /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ +#define SCB_DTCMCR_RMW_Pos 1 /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ -#define SCB_DTCMCR_EN_Pos 0 /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL << SCB_DTCMCR_EN_Pos) /*!< SCB DTCMCR: EN Mask */ +#define SCB_DTCMCR_EN_Pos 0 /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL << SCB_DTCMCR_EN_Pos) /*!< SCB DTCMCR: EN Mask */ /* AHBP Control Register */ -#define SCB_AHBPCR_SZ_Pos 1 /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ +#define SCB_AHBPCR_SZ_Pos 1 /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ -#define SCB_AHBPCR_EN_Pos 0 /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL << SCB_AHBPCR_EN_Pos) /*!< SCB AHBPCR: EN Mask */ +#define SCB_AHBPCR_EN_Pos 0 /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL << SCB_AHBPCR_EN_Pos) /*!< SCB AHBPCR: EN Mask */ /* L1 Cache Control Register */ -#define SCB_CACR_FORCEWT_Pos 2 /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ +#define SCB_CACR_FORCEWT_Pos 2 /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ -#define SCB_CACR_ECCEN_Pos 1 /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ +#define SCB_CACR_ECCEN_Pos 1 /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ -#define SCB_CACR_SIWT_Pos 0 /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL << SCB_CACR_SIWT_Pos) /*!< SCB CACR: SIWT Mask */ +#define SCB_CACR_SIWT_Pos 0 /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL << SCB_CACR_SIWT_Pos) /*!< SCB CACR: SIWT Mask */ /* AHBS control register */ -#define SCB_AHBSCR_INITCOUNT_Pos 11 /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ +#define SCB_AHBSCR_INITCOUNT_Pos 11 /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ -#define SCB_AHBSCR_TPRI_Pos 2 /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ +#define SCB_AHBSCR_TPRI_Pos 2 /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ -#define SCB_AHBSCR_CTL_Pos 0 /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL << SCB_AHBPCR_CTL_Pos) /*!< SCB AHBSCR: CTL Mask */ +#define SCB_AHBSCR_CTL_Pos 0 /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL << SCB_AHBPCR_CTL_Pos) /*!< SCB AHBSCR: CTL Mask */ /* Auxiliary Bus Fault Status Register */ -#define SCB_ABFSR_AXIMTYPE_Pos 8 /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ +#define SCB_ABFSR_AXIMTYPE_Pos 8 /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ -#define SCB_ABFSR_EPPB_Pos 4 /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ +#define SCB_ABFSR_EPPB_Pos 4 /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ -#define SCB_ABFSR_AXIM_Pos 3 /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ +#define SCB_ABFSR_AXIM_Pos 3 /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ -#define SCB_ABFSR_AHBP_Pos 2 /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ +#define SCB_ABFSR_AHBP_Pos 2 /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ -#define SCB_ABFSR_DTCM_Pos 1 /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ +#define SCB_ABFSR_DTCM_Pos 1 /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ -#define SCB_ABFSR_ITCM_Pos 0 /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL << SCB_ABFSR_ITCM_Pos) /*!< SCB ABFSR: ITCM Mask */ +#define SCB_ABFSR_ITCM_Pos 0 /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL << SCB_ABFSR_ITCM_Pos) /*!< SCB ABFSR: ITCM Mask */ -/*@} end of group CMSIS_SCB */ + /*@} end of group CMSIS_SCB */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) \brief Type definitions for the System Control and ID Register not in the SCB @{ */ -/** \brief Structure type to access the System Control and ID Register not in the SCB. + /** \brief Structure type to access the System Control and ID Register not in the SCB. */ -typedef struct -{ - uint32_t RESERVED0[1]; - __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; + typedef struct + { + uint32_t RESERVED0[1]; + __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + } SCnSCB_Type; /* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ /* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12 /*!< ACTLR: DISITMATBFLUSH Position */ -#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12 /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ -#define SCnSCB_ACTLR_DISRAMODE_Pos 11 /*!< ACTLR: DISRAMODE Position */ -#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ +#define SCnSCB_ACTLR_DISRAMODE_Pos 11 /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ -#define SCnSCB_ACTLR_FPEXCODIS_Pos 10 /*!< ACTLR: FPEXCODIS Position */ -#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10 /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ -#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ -/*@} end of group CMSIS_SCnotSCB */ + /*@} end of group CMSIS_SCnotSCB */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_SysTick System Tick Timer (SysTick) \brief Type definitions for the System Timer Registers. @{ */ -/** \brief Structure type to access the System Timer (SysTick). + /** \brief Structure type to access the System Timer (SysTick). */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; + typedef struct + { + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ + } SysTick_Type; /* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ -#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ -#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ -#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ /* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ /* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ /* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ -#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ -#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */ -/*@} end of group CMSIS_SysTick */ + /*@} end of group CMSIS_SysTick */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) \brief Type definitions for the Instrumentation Trace Macrocell (ITM) @{ */ -/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + /** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). */ -typedef struct -{ - __O union - { - __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864]; - __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15]; - __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15]; - __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29]; - __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43]; - __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6]; - __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; + typedef struct + { + __O union + { + __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT[32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ + } ITM_Type; /* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ /* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ -#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ +#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ -#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ +#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ -#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ -#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ -#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ -#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ -#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ -#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ /* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ /* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ /* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ /* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ -#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ -#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ -/*@}*/ /* end of group CMSIS_ITM */ + /*@}*/ /* end of group CMSIS_ITM */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) \brief Type definitions for the Data Watchpoint and Trace (DWT) @{ */ -/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + /** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). */ -typedef struct -{ - __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1]; - __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1]; - __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1]; - __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED3[981]; - __O uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ - __I uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ -} DWT_Type; + typedef struct + { + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1]; + __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1]; + __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1]; + __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981]; + __O uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __I uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + } DWT_Type; /* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ +#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ -#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ +#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ -#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ +#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ -#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ +#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ -#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ +#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ -#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ +#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ -#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ +#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ -#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ +#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ -#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ +#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ -#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ +#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ -#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ +#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ -#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ +#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ -#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ +#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ -#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ +#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ -#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ +#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ -#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ +#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ -#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ +#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ -#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ +#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ /* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ +#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ /* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ +#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ /* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ /* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ +#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ /* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ /* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ +#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ /* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ +#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ -#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ +#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ -#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ +#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ -#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ +#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ -#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ +#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ -#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ +#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ -#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ +#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ -#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ +#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ -#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ +#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ -/*@}*/ /* end of group CMSIS_DWT */ + /*@}*/ /* end of group CMSIS_DWT */ - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_TPI Trace Port Interface (TPI) \brief Type definitions for the Trace Port Interface (TPI) @{ */ -/** \brief Structure type to access the Trace Port Interface Register (TPI). + /** \brief Structure type to access the Trace Port Interface Register (TPI). */ -typedef struct -{ - __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2]; - __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55]; - __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131]; - __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759]; - __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ - __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1]; - __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39]; - __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8]; - __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; + typedef struct + { + __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2]; + __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55]; + __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131]; + __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759]; + __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1]; + __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39]; + __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8]; + __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ + } TPI_Type; /* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ +#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ /* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ +#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ /* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ +#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ -#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ +#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ -#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ +#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ -#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ +#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ /* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ +#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ -#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ +#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ /* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ +#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ /* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ -#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ +#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ -#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ -#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ +#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ -#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ +#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ -#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ +#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ -#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ +#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ /* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ -#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ +#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ /* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ -#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ +#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ -#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ -#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ +#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ -#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ +#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ -#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ +#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ -#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ +#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ /* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ -#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ +#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ /* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ +#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ /* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ +#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ -#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ +#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ -#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ +#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ -#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ +#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ -#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ +#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ -#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ +#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ /* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ +#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ -#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ +#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + /*@}*/ /* end of group CMSIS_TPI */ #if (__MPU_PRESENT == 1) -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_MPU Memory Protection Unit (MPU) \brief Type definitions for the Memory Protection Unit (MPU) @{ */ -/** \brief Structure type to access the Memory Protection Unit (MPU). + /** \brief Structure type to access the Memory Protection Unit (MPU). */ -typedef struct -{ - __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; + typedef struct + { + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ + } MPU_Type; /* MPU Type Register */ -#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ -#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ -#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ /* MPU Control Register */ -#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ -#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ -#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ /* MPU Region Number Register */ -#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ /* MPU Region Base Address Register */ -#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ -#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ -#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ /* MPU Region Attribute and Size Register */ -#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ -#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ -#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ -#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ -#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ -#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ -#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ -#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ -#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ -#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ /*@} end of group CMSIS_MPU */ #endif - #if (__FPU_PRESENT == 1) -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_FPU Floating Point Unit (FPU) \brief Type definitions for the Floating Point Unit (FPU) @{ */ -/** \brief Structure type to access the Floating Point Unit (FPU). + /** \brief Structure type to access the Floating Point Unit (FPU). */ -typedef struct -{ - uint32_t RESERVED0[1]; - __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ - __I uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ -} FPU_Type; + typedef struct + { + uint32_t RESERVED0[1]; + __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __I uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ + } FPU_Type; /* Floating-Point Context Control Register */ -#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ +#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ -#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ +#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ -#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ +#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ -#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ +#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ -#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ +#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ -#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ +#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ -#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ +#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ -#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ +#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ -#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */ +#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */ /* Floating-Point Context Address Register */ -#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ +#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ /* Floating-Point Default Status Control Register */ -#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ +#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ -#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ +#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ -#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ +#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ -#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ +#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ /* Media and FP Feature Register 0 */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ -#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ +#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ -#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ +#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ -#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ +#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ -#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ +#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ -#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ +#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ -#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ +#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ -#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */ +#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */ /* Media and FP Feature Register 1 */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ -#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ +#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ -#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ +#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ -#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */ +#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */ /* Media and FP Feature Register 2 */ /*@} end of group CMSIS_FPU */ #endif - -/** \ingroup CMSIS_core_register + /** \ingroup CMSIS_core_register \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) \brief Type definitions for the Core Debug Registers @{ */ -/** \brief Structure type to access the Core Debug Register (CoreDebug). + /** \brief Structure type to access the Core Debug Register (CoreDebug). */ -typedef struct -{ - __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; + typedef struct + { + __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + } CoreDebug_Type; /* Debug Halting Control and Status Register */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ -#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ -#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ -#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ -#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ -#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ /* Debug Core Register Selector Register */ -#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ -#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ /* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ -#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ -#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ -#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ -#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ -#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ -#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ -#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ /*@} end of group CMSIS_CoreDebug */ - /** \ingroup CMSIS_core_register \defgroup CMSIS_core_base Core Definitions \brief Definitions for base addresses, unions, and structures. @@ -1584,39 +1567,37 @@ typedef struct */ /* Memory mapping of Cortex-M4 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ +#define SCnSCB ((SCnSCB_Type *)SCS_BASE) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *)SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *)SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *)NVIC_BASE) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *)ITM_BASE) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *)DWT_BASE) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *)TPI_BASE) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *)CoreDebug_BASE) /*!< Core Debug configuration struct */ #if (__MPU_PRESENT == 1) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ +#define MPU ((MPU_Type *)MPU_BASE) /*!< Memory Protection Unit */ #endif #if (__FPU_PRESENT == 1) - #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ - #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *)FPU_BASE) /*!< Floating Point Unit */ #endif -/*@} */ + /*@} */ - - -/******************************************************************************* + /******************************************************************************* * Hardware Abstraction Layer Core Function Interface contains: - Core NVIC Functions @@ -1624,19 +1605,17 @@ typedef struct - Core Debug Functions - Core Register Access Functions ******************************************************************************/ -/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference + /** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference */ - - -/* ########################## NVIC functions #################################### */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ########################## NVIC functions #################################### */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_NVICFunctions NVIC Functions \brief Functions that manage interrupts and exceptions via the NVIC. @{ */ -/** \brief Set Priority Grouping + /** \brief Set Priority Grouping The function sets the priority grouping field using the required unlock sequence. The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. @@ -1646,58 +1625,54 @@ typedef struct \param [in] PriorityGroup Priority grouping field. */ -__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + __STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) + { + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; + } - -/** \brief Get Priority Grouping + /** \brief Get Priority Grouping The function reads the priority grouping field from the NVIC Interrupt Controller. \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). */ -__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) -{ - return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ -} + __STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) + { + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ + } - -/** \brief Enable External Interrupt + /** \brief Enable External Interrupt The function enables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ -/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */ - NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */ -} + __STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) + { + /* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */ + NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */ + } - -/** \brief Disable External Interrupt + /** \brief Disable External Interrupt The function disables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ -} + __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) + { + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* disable interrupt */ + } - -/** \brief Get Pending Interrupt + /** \brief Get Pending Interrupt The function reads the pending register in the NVIC and returns the pending bit for the specified interrupt. @@ -1707,37 +1682,34 @@ __STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) \return 0 Interrupt status is not pending. \return 1 Interrupt status is pending. */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ -} + __STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) + { + return ((uint32_t)((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn)&0x1F))) ? 1 : 0)); /* Return 1 if pending else 0 */ + } - -/** \brief Set Pending Interrupt + /** \brief Set Pending Interrupt The function sets the pending bit of an external interrupt. \param [in] IRQn Interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ -} + __STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) + { + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* set interrupt pending */ + } - -/** \brief Clear Pending Interrupt + /** \brief Clear Pending Interrupt The function clears the pending bit of an external interrupt. \param [in] IRQn External interrupt number. Value cannot be negative. */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ -} + __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) + { + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn)&0x1F)); /* Clear pending interrupt */ + } - -/** \brief Get Active Interrupt + /** \brief Get Active Interrupt The function reads the active register in NVIC and returns the active bit. @@ -1746,13 +1718,12 @@ __STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) \return 0 Interrupt status is not active. \return 1 Interrupt status is active. */ -__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ -} + __STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) + { + return ((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn)&0x1F))) ? 1 : 0)); /* Return 1 if active else 0 */ + } - -/** \brief Set Interrupt Priority + /** \brief Set Interrupt Priority The function sets the priority of an interrupt. @@ -1761,16 +1732,19 @@ __STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) \param [in] IRQn Interrupt number. \param [in] priority Priority to set. */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if(IRQn < 0) { - SCB->SHPR[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */ - else { - NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ -} + __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) + { + if (IRQn < 0) + { + SCB->SHPR[((uint32_t)(IRQn)&0xF) - 4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); + } /* set Priority for Cortex-M System Interrupts */ + else + { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); + } /* set Priority for device specific Interrupts */ + } - -/** \brief Get Interrupt Priority + /** \brief Get Interrupt Priority The function reads the priority of an interrupt. The interrupt number can be positive to specify an external (device specific) @@ -1781,17 +1755,20 @@ __STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ + __STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) + { - if(IRQn < 0) { - return((uint32_t)(SCB->SHPR[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */ - else { - return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ -} + if (IRQn < 0) + { + return ((uint32_t)(SCB->SHPR[((uint32_t)(IRQn)&0xF) - 4] >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for Cortex-M system interrupts */ + else + { + return ((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); + } /* get priority for device specific interrupts */ + } - -/** \brief Encode Priority + /** \brief Encode Priority The function encodes the priority for an interrupt with the given priority group, preemptive priority value, and subpriority value. @@ -1803,23 +1780,21 @@ __STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) \param [in] SubPriority Subpriority value (starting from 0). \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; + __STATIC_INLINE uint32_t NVIC_EncodePriority(uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) + { + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - return ( - ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | - ((SubPriority & ((1 << (SubPriorityBits )) - 1))) - ); -} + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits)) - 1)))); + } - -/** \brief Decode Priority + /** \brief Decode Priority The function decodes an interrupt priority value with a given priority group to preemptive priority value and subpriority value. @@ -1831,38 +1806,37 @@ __STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t P \param [out] pPreemptPriority Preemptive priority value (starting from 0). \param [out] pSubPriority Subpriority value (starting from 0). */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; + __STATIC_INLINE void NVIC_DecodePriority(uint32_t Priority, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) + { + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); - *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); -} + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority) & ((1 << (SubPriorityBits)) - 1); + } - -/** \brief System Reset + /** \brief System Reset The function initiates a system reset request to reset the MCU. */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included + __STATIC_INLINE void NVIC_SystemReset(void) + { + __DSB(); /* Ensure all outstanding memory accesses included buffered write are completed before reset */ - SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - while(1); /* wait until reset */ -} + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while (1) + ; /* wait until reset */ + } /*@} end of CMSIS_Core_NVICFunctions */ - /* ########################## Cache functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_CacheFunctions Cache Functions @@ -1871,233 +1845,231 @@ __STATIC_INLINE void NVIC_SystemReset(void) */ /* Cache Size ID Register Macros */ -#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) -#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) -#define CCSIDR_LSSHIFT(x) (((x) & SCB_CCSIDR_LINESIZE_Msk ) >> SCB_CCSIDR_LINESIZE_Pos ) +#define CCSIDR_WAYS(x) (((x)&SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x)&SCB_CCSIDR_NUMSETS_Msk) >> SCB_CCSIDR_NUMSETS_Pos) +#define CCSIDR_LSSHIFT(x) (((x)&SCB_CCSIDR_LINESIZE_Msk) >> SCB_CCSIDR_LINESIZE_Pos) - -/** \brief Enable I-Cache + /** \brief Enable I-Cache The function turns on I-Cache */ -__STATIC_INLINE void SCB_EnableICache(void) -{ - #if (__ICACHE_PRESENT == 1) - __DSB(); - __ISB(); - SCB->ICIALLU = 0; // invalidate I-Cache - SCB->CCR |= SCB_CCR_IC_Msk; // enable I-Cache - __DSB(); - __ISB(); - #endif -} + __STATIC_INLINE void SCB_EnableICache(void) + { +#if (__ICACHE_PRESENT == 1) + __DSB(); + __ISB(); + SCB->ICIALLU = 0; // invalidate I-Cache + SCB->CCR |= SCB_CCR_IC_Msk; // enable I-Cache + __DSB(); + __ISB(); +#endif + } - -/** \brief Disable I-Cache + /** \brief Disable I-Cache The function turns off I-Cache */ -__STATIC_INLINE void SCB_DisableICache(void) -{ - #if (__ICACHE_PRESENT == 1) - __DSB(); - __ISB(); - SCB->CCR &= ~SCB_CCR_IC_Msk; // disable I-Cache - SCB->ICIALLU = 0; // invalidate I-Cache - __DSB(); - __ISB(); - #endif -} + __STATIC_INLINE void SCB_DisableICache(void) + { +#if (__ICACHE_PRESENT == 1) + __DSB(); + __ISB(); + SCB->CCR &= ~SCB_CCR_IC_Msk; // disable I-Cache + SCB->ICIALLU = 0; // invalidate I-Cache + __DSB(); + __ISB(); +#endif + } - -/** \brief Invalidate I-Cache + /** \brief Invalidate I-Cache The function invalidates I-Cache */ -__STATIC_INLINE void SCB_InvalidateICache(void) -{ - #if (__ICACHE_PRESENT == 1) - __DSB(); - __ISB(); - SCB->ICIALLU = 0; - __DSB(); - __ISB(); - #endif -} + __STATIC_INLINE void SCB_InvalidateICache(void) + { +#if (__ICACHE_PRESENT == 1) + __DSB(); + __ISB(); + SCB->ICIALLU = 0; + __DSB(); + __ISB(); +#endif + } - -/** \brief Enable D-Cache + /** \brief Enable D-Cache The function turns on D-Cache */ -__STATIC_INLINE void SCB_EnableDCache(void) -{ - #if (__DCACHE_PRESENT == 1) - uint32_t ccsidr, sshift, wshift, sw; - uint32_t sets, ways; + __STATIC_INLINE void SCB_EnableDCache(void) + { +#if (__DCACHE_PRESENT == 1) + uint32_t ccsidr, sshift, wshift, sw; + uint32_t sets, ways; - ccsidr = SCB->CCSIDR; - sets = CCSIDR_SETS(ccsidr); - sshift = CCSIDR_LSSHIFT(ccsidr) + 4; - ways = CCSIDR_WAYS(ccsidr); - wshift = __CLZ(ways) & 0x1f; + ccsidr = SCB->CCSIDR; + sets = CCSIDR_SETS(ccsidr); + sshift = CCSIDR_LSSHIFT(ccsidr) + 4; + ways = CCSIDR_WAYS(ccsidr); + wshift = __CLZ(ways) & 0x1f; - __DSB(); + __DSB(); - do { // invalidate D-Cache - int32_t tmpways = ways; - do { - sw = ((tmpways << wshift) | (sets << sshift)); - SCB->DCISW = sw; - } while(tmpways--); - } while(sets--); - __DSB(); + do + { // invalidate D-Cache + int32_t tmpways = ways; + do + { + sw = ((tmpways << wshift) | (sets << sshift)); + SCB->DCISW = sw; + } while (tmpways--); + } while (sets--); + __DSB(); - SCB->CCR |= SCB_CCR_DC_Msk; // enable D-Cache + SCB->CCR |= SCB_CCR_DC_Msk; // enable D-Cache - __DSB(); - __ISB(); - #endif -} + __DSB(); + __ISB(); +#endif + } - -/** \brief Disable D-Cache + /** \brief Disable D-Cache The function turns off D-Cache */ -__STATIC_INLINE void SCB_DisableDCache(void) -{ - #if (__DCACHE_PRESENT == 1) - uint32_t ccsidr, sshift, wshift, sw; - uint32_t sets, ways; + __STATIC_INLINE void SCB_DisableDCache(void) + { +#if (__DCACHE_PRESENT == 1) + uint32_t ccsidr, sshift, wshift, sw; + uint32_t sets, ways; - ccsidr = SCB->CCSIDR; - sets = CCSIDR_SETS(ccsidr); - sshift = CCSIDR_LSSHIFT(ccsidr) + 4; - ways = CCSIDR_WAYS(ccsidr); - wshift = __CLZ(ways) & 0x1f; + ccsidr = SCB->CCSIDR; + sets = CCSIDR_SETS(ccsidr); + sshift = CCSIDR_LSSHIFT(ccsidr) + 4; + ways = CCSIDR_WAYS(ccsidr); + wshift = __CLZ(ways) & 0x1f; - __DSB(); + __DSB(); - SCB->CCR &= ~SCB_CCR_DC_Msk; // disable D-Cache + SCB->CCR &= ~SCB_CCR_DC_Msk; // disable D-Cache - do { // clean & invalidate D-Cache - int32_t tmpways = ways; - do { - sw = ((tmpways << wshift) | (sets << sshift)); - SCB->DCCISW = sw; - } while(tmpways--); - } while(sets--); + do + { // clean & invalidate D-Cache + int32_t tmpways = ways; + do + { + sw = ((tmpways << wshift) | (sets << sshift)); + SCB->DCCISW = sw; + } while (tmpways--); + } while (sets--); + __DSB(); + __ISB(); +#endif + } - __DSB(); - __ISB(); - #endif -} - - -/** \brief Invalidate D-Cache + /** \brief Invalidate D-Cache The function invalidates D-Cache */ -__STATIC_INLINE void SCB_InvalidateDCache(void) -{ - #if (__DCACHE_PRESENT == 1) - uint32_t ccsidr, sshift, wshift, sw; - uint32_t sets, ways; + __STATIC_INLINE void SCB_InvalidateDCache(void) + { +#if (__DCACHE_PRESENT == 1) + uint32_t ccsidr, sshift, wshift, sw; + uint32_t sets, ways; - ccsidr = SCB->CCSIDR; - sets = CCSIDR_SETS(ccsidr); - sshift = CCSIDR_LSSHIFT(ccsidr) + 4; - ways = CCSIDR_WAYS(ccsidr); - wshift = __CLZ(ways) & 0x1f; + ccsidr = SCB->CCSIDR; + sets = CCSIDR_SETS(ccsidr); + sshift = CCSIDR_LSSHIFT(ccsidr) + 4; + ways = CCSIDR_WAYS(ccsidr); + wshift = __CLZ(ways) & 0x1f; - __DSB(); + __DSB(); - do { // invalidate D-Cache - int32_t tmpways = ways; - do { - sw = ((tmpways << wshift) | (sets << sshift)); - SCB->DCISW = sw; - } while(tmpways--); - } while(sets--); + do + { // invalidate D-Cache + int32_t tmpways = ways; + do + { + sw = ((tmpways << wshift) | (sets << sshift)); + SCB->DCISW = sw; + } while (tmpways--); + } while (sets--); - __DSB(); - __ISB(); - #endif -} + __DSB(); + __ISB(); +#endif + } - -/** \brief Clean D-Cache + /** \brief Clean D-Cache The function cleans D-Cache */ -__STATIC_INLINE void SCB_CleanDCache(void) -{ - #if (__DCACHE_PRESENT == 1) - uint32_t ccsidr, sshift, wshift, sw; - uint32_t sets, ways; + __STATIC_INLINE void SCB_CleanDCache(void) + { +#if (__DCACHE_PRESENT == 1) + uint32_t ccsidr, sshift, wshift, sw; + uint32_t sets, ways; - ccsidr = SCB->CCSIDR; - sets = CCSIDR_SETS(ccsidr); - sshift = CCSIDR_LSSHIFT(ccsidr) + 4; - ways = CCSIDR_WAYS(ccsidr); - wshift = __CLZ(ways) & 0x1f; + ccsidr = SCB->CCSIDR; + sets = CCSIDR_SETS(ccsidr); + sshift = CCSIDR_LSSHIFT(ccsidr) + 4; + ways = CCSIDR_WAYS(ccsidr); + wshift = __CLZ(ways) & 0x1f; - __DSB(); + __DSB(); - do { // clean D-Cache - int32_t tmpways = ways; - do { - sw = ((tmpways << wshift) | (sets << sshift)); - SCB->DCCSW = sw; - } while(tmpways--); - } while(sets--); + do + { // clean D-Cache + int32_t tmpways = ways; + do + { + sw = ((tmpways << wshift) | (sets << sshift)); + SCB->DCCSW = sw; + } while (tmpways--); + } while (sets--); - __DSB(); - __ISB(); - #endif -} + __DSB(); + __ISB(); +#endif + } - -/** \brief Clean & Invalidate D-Cache + /** \brief Clean & Invalidate D-Cache The function cleans and Invalidates D-Cache */ -__STATIC_INLINE void SCB_CleanInvalidateDCache(void) -{ - #if (__DCACHE_PRESENT == 1) - uint32_t ccsidr, sshift, wshift, sw; - uint32_t sets, ways; + __STATIC_INLINE void SCB_CleanInvalidateDCache(void) + { +#if (__DCACHE_PRESENT == 1) + uint32_t ccsidr, sshift, wshift, sw; + uint32_t sets, ways; - ccsidr = SCB->CCSIDR; - sets = CCSIDR_SETS(ccsidr); - sshift = CCSIDR_LSSHIFT(ccsidr) + 4; - ways = CCSIDR_WAYS(ccsidr); - wshift = __CLZ(ways) & 0x1f; + ccsidr = SCB->CCSIDR; + sets = CCSIDR_SETS(ccsidr); + sshift = CCSIDR_LSSHIFT(ccsidr) + 4; + ways = CCSIDR_WAYS(ccsidr); + wshift = __CLZ(ways) & 0x1f; - __DSB(); + __DSB(); - do { // clean & invalidate D-Cache - int32_t tmpways = ways; - do { - sw = ((tmpways << wshift) | (sets << sshift)); - SCB->DCCISW = sw; - } while(tmpways--); - } while(sets--); + do + { // clean & invalidate D-Cache + int32_t tmpways = ways; + do + { + sw = ((tmpways << wshift) | (sets << sshift)); + SCB->DCCISW = sw; + } while (tmpways--); + } while (sets--); - __DSB(); - __ISB(); - #endif -} + __DSB(); + __ISB(); +#endif + } + /*@} end of CMSIS_Core_CacheFunctions */ -/*@} end of CMSIS_Core_CacheFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ################################## SysTick function ############################################ */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_SysTickFunctions SysTick Functions \brief Functions that configure the System. @{ @@ -2105,7 +2077,7 @@ __STATIC_INLINE void SCB_CleanInvalidateDCache(void) #if (__Vendor_SysTickConfig == 0) -/** \brief System Tick Configuration + /** \brief System Tick Configuration The function initializes the System Timer and its interrupt, and starts the System Tick Timer. Counter is in free running mode to generate periodic interrupts. @@ -2120,37 +2092,35 @@ __STATIC_INLINE void SCB_CleanInvalidateDCache(void) must contain a vendor-specific implementation of this function. */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) + { + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) + return (1); /* Reload value impossible */ - SysTick->LOAD = ticks - 1; /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0); /* Function successful */ -} + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority(SysTick_IRQn, (1 << __NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ + } #endif -/*@} end of CMSIS_Core_SysTickFunctions */ + /*@} end of CMSIS_Core_SysTickFunctions */ - - -/* ##################################### Debug In/Output function ########################################### */ -/** \ingroup CMSIS_Core_FunctionInterface + /* ##################################### Debug In/Output function ########################################### */ + /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_core_DebugFunctions ITM Functions \brief Functions that access the ITM debug interface. @{ */ -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - -/** \brief ITM Send Character + /** \brief ITM Send Character The function transmits a character via the ITM channel 0, and \li Just returns when no debugger is connected that has booked the output. @@ -2160,57 +2130,59 @@ extern volatile int32_t ITM_RxBuffer; /*!< External variable \returns Character to transmit. */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ - (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0].u32 == 0); - ITM->PORT[0].u8 = (uint8_t) ch; - } - return (ch); -} + __STATIC_INLINE uint32_t ITM_SendChar(uint32_t ch) + { + if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1UL << 0))) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0) + ; + ITM->PORT[0].u8 = (uint8_t)ch; + } + return (ch); + } - -/** \brief ITM Receive Character + /** \brief ITM Receive Character The function inputs a character via the external variable \ref ITM_RxBuffer. \return Received character. \return -1 No character pending. */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) { - int32_t ch = -1; /* no character available */ + __STATIC_INLINE int32_t ITM_ReceiveChar(void) + { + int32_t ch = -1; /* no character available */ - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } - return (ch); -} + return (ch); + } - -/** \brief ITM Check Character + /** \brief ITM Check Character The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. \return 0 No character available. \return 1 Character available. */ -__STATIC_INLINE int32_t ITM_CheckChar (void) { - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { - return (0); /* no character available */ - } else { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - + __STATIC_INLINE int32_t ITM_CheckChar(void) + { + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } + } + /*@} end of CMSIS_core_DebugFunctions */ #ifdef __cplusplus } diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmFunc.h b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmFunc.h index 01089f1333..1ccdd1cb91 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmFunc.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmFunc.h @@ -1,4 +1,4 @@ -/**************************************************************************//** +/**************************************************************************/ /** * @file core_cmFunc.h * @brief CMSIS Cortex-M Core Function Access Header File * @version V4.00 @@ -34,22 +34,20 @@ POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - #ifndef __CORE_CMFUNC_H #define __CORE_CMFUNC_H - /* ########################### Core Function Access ########################### */ /** \ingroup CMSIS_Core_FunctionInterface \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions @{ */ -#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +#if defined(__CC_ARM) /*------------------RealView Compiler -----------------*/ /* ARM armcc specific functions */ #if (__ARMCC_VERSION < 400677) - #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#error "Please use ARM Compiler Toolchain V4.0.677 or later!" #endif /* intrinsic void __enable_irq(); */ @@ -63,11 +61,10 @@ */ __STATIC_INLINE uint32_t __get_CONTROL(void) { - register uint32_t __regControl __ASM("control"); - return(__regControl); + register uint32_t __regControl __ASM("control"); + return (__regControl); } - /** \brief Set Control Register This function writes the given value to the Control Register. @@ -76,11 +73,10 @@ __STATIC_INLINE uint32_t __get_CONTROL(void) */ __STATIC_INLINE void __set_CONTROL(uint32_t control) { - register uint32_t __regControl __ASM("control"); - __regControl = control; + register uint32_t __regControl __ASM("control"); + __regControl = control; } - /** \brief Get IPSR Register This function returns the content of the IPSR Register. @@ -89,11 +85,10 @@ __STATIC_INLINE void __set_CONTROL(uint32_t control) */ __STATIC_INLINE uint32_t __get_IPSR(void) { - register uint32_t __regIPSR __ASM("ipsr"); - return(__regIPSR); + register uint32_t __regIPSR __ASM("ipsr"); + return (__regIPSR); } - /** \brief Get APSR Register This function returns the content of the APSR Register. @@ -102,11 +97,10 @@ __STATIC_INLINE uint32_t __get_IPSR(void) */ __STATIC_INLINE uint32_t __get_APSR(void) { - register uint32_t __regAPSR __ASM("apsr"); - return(__regAPSR); + register uint32_t __regAPSR __ASM("apsr"); + return (__regAPSR); } - /** \brief Get xPSR Register This function returns the content of the xPSR Register. @@ -115,11 +109,10 @@ __STATIC_INLINE uint32_t __get_APSR(void) */ __STATIC_INLINE uint32_t __get_xPSR(void) { - register uint32_t __regXPSR __ASM("xpsr"); - return(__regXPSR); + register uint32_t __regXPSR __ASM("xpsr"); + return (__regXPSR); } - /** \brief Get Process Stack Pointer This function returns the current value of the Process Stack Pointer (PSP). @@ -128,11 +121,10 @@ __STATIC_INLINE uint32_t __get_xPSR(void) */ __STATIC_INLINE uint32_t __get_PSP(void) { - register uint32_t __regProcessStackPointer __ASM("psp"); - return(__regProcessStackPointer); + register uint32_t __regProcessStackPointer __ASM("psp"); + return (__regProcessStackPointer); } - /** \brief Set Process Stack Pointer This function assigns the given value to the Process Stack Pointer (PSP). @@ -141,11 +133,10 @@ __STATIC_INLINE uint32_t __get_PSP(void) */ __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) { - register uint32_t __regProcessStackPointer __ASM("psp"); - __regProcessStackPointer = topOfProcStack; + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; } - /** \brief Get Main Stack Pointer This function returns the current value of the Main Stack Pointer (MSP). @@ -154,11 +145,10 @@ __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) */ __STATIC_INLINE uint32_t __get_MSP(void) { - register uint32_t __regMainStackPointer __ASM("msp"); - return(__regMainStackPointer); + register uint32_t __regMainStackPointer __ASM("msp"); + return (__regMainStackPointer); } - /** \brief Set Main Stack Pointer This function assigns the given value to the Main Stack Pointer (MSP). @@ -167,11 +157,10 @@ __STATIC_INLINE uint32_t __get_MSP(void) */ __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) { - register uint32_t __regMainStackPointer __ASM("msp"); - __regMainStackPointer = topOfMainStack; + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; } - /** \brief Get Priority Mask This function returns the current state of the priority mask bit from the Priority Mask Register. @@ -180,11 +169,10 @@ __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) */ __STATIC_INLINE uint32_t __get_PRIMASK(void) { - register uint32_t __regPriMask __ASM("primask"); - return(__regPriMask); + register uint32_t __regPriMask __ASM("primask"); + return (__regPriMask); } - /** \brief Set Priority Mask This function assigns the given value to the Priority Mask Register. @@ -193,28 +181,25 @@ __STATIC_INLINE uint32_t __get_PRIMASK(void) */ __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) { - register uint32_t __regPriMask __ASM("primask"); - __regPriMask = (priMask); + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); } - -#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) +#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) /** \brief Enable FIQ This function enables FIQ interrupts by clearing the F-bit in the CPSR. Can only be executed in Privileged modes. */ -#define __enable_fault_irq __enable_fiq - +#define __enable_fault_irq __enable_fiq /** \brief Disable FIQ This function disables FIQ interrupts by setting the F-bit in the CPSR. Can only be executed in Privileged modes. */ -#define __disable_fault_irq __disable_fiq - +#define __disable_fault_irq __disable_fiq /** \brief Get Base Priority @@ -222,13 +207,12 @@ __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) \return Base Priority register value */ -__STATIC_INLINE uint32_t __get_BASEPRI(void) +__STATIC_INLINE uint32_t __get_BASEPRI(void) { - register uint32_t __regBasePri __ASM("basepri"); - return(__regBasePri); + register uint32_t __regBasePri __ASM("basepri"); + return (__regBasePri); } - /** \brief Set Base Priority This function assigns the given value to the Base Priority register. @@ -237,11 +221,10 @@ __STATIC_INLINE uint32_t __get_BASEPRI(void) */ __STATIC_INLINE void __set_BASEPRI(uint32_t basePri) { - register uint32_t __regBasePri __ASM("basepri"); - __regBasePri = (basePri & 0xff); + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); } - /** \brief Get Fault Mask This function returns the current value of the Fault Mask register. @@ -250,11 +233,10 @@ __STATIC_INLINE void __set_BASEPRI(uint32_t basePri) */ __STATIC_INLINE uint32_t __get_FAULTMASK(void) { - register uint32_t __regFaultMask __ASM("faultmask"); - return(__regFaultMask); + register uint32_t __regFaultMask __ASM("faultmask"); + return (__regFaultMask); } - /** \brief Set Fault Mask This function assigns the given value to the Fault Mask register. @@ -263,14 +245,13 @@ __STATIC_INLINE uint32_t __get_FAULTMASK(void) */ __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) { - register uint32_t __regFaultMask __ASM("faultmask"); - __regFaultMask = (faultMask & (uint32_t)1); + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1); } #endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */ - -#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) +#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) /** \brief Get FPSCR @@ -281,14 +262,13 @@ __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) __STATIC_INLINE uint32_t __get_FPSCR(void) { #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) - register uint32_t __regfpscr __ASM("fpscr"); - return(__regfpscr); + register uint32_t __regfpscr __ASM("fpscr"); + return (__regfpscr); #else - return(0); + return (0); #endif } - /** \brief Set FPSCR This function assigns the given value to the Floating Point Status/Control register. @@ -298,15 +278,14 @@ __STATIC_INLINE uint32_t __get_FPSCR(void) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) { #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) - register uint32_t __regfpscr __ASM("fpscr"); - __regfpscr = (fpscr); + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); #endif } #endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */ - -#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +#elif defined(__GNUC__) /*------------------ GNU Compiler ---------------------*/ /* GNU gcc specific functions */ /** \brief Enable IRQ Interrupts @@ -314,257 +293,277 @@ __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) This function enables IRQ interrupts by clearing the I-bit in the CPSR. Can only be executed in Privileged modes. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void) +__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void) { - __ASM volatile ("cpsie i" : : : "memory"); + __ASM volatile("cpsie i" + : + : + : "memory"); } - /** \brief Disable IRQ Interrupts This function disables IRQ interrupts by setting the I-bit in the CPSR. Can only be executed in Privileged modes. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void) +__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void) { - __ASM volatile ("cpsid i" : : : "memory"); + __ASM volatile("cpsid i" + : + : + : "memory"); } - /** \brief Get Control Register This function returns the content of the Control Register. \return Control Register value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void) { - uint32_t result; + uint32_t result; - __ASM volatile ("MRS %0, control" : "=r" (result) ); - return(result); + __ASM volatile("MRS %0, control" + : "=r"(result)); + return (result); } - /** \brief Set Control Register This function writes the given value to the Control Register. \param [in] control Control Register value to set */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control) +__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control) { - __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ASM volatile("MSR control, %0" + : + : "r"(control) + : "memory"); } - /** \brief Get IPSR Register This function returns the content of the IPSR Register. \return IPSR Register value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void) { - uint32_t result; + uint32_t result; - __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); - return(result); + __ASM volatile("MRS %0, ipsr" + : "=r"(result)); + return (result); } - /** \brief Get APSR Register This function returns the content of the APSR Register. \return APSR Register value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void) { - uint32_t result; + uint32_t result; - __ASM volatile ("MRS %0, apsr" : "=r" (result) ); - return(result); + __ASM volatile("MRS %0, apsr" + : "=r"(result)); + return (result); } - /** \brief Get xPSR Register This function returns the content of the xPSR Register. \return xPSR Register value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void) { - uint32_t result; + uint32_t result; - __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); - return(result); + __ASM volatile("MRS %0, xpsr" + : "=r"(result)); + return (result); } - /** \brief Get Process Stack Pointer This function returns the current value of the Process Stack Pointer (PSP). \return PSP Register value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void) { - register uint32_t result; + register uint32_t result; - __ASM volatile ("MRS %0, psp\n" : "=r" (result) ); - return(result); + __ASM volatile("MRS %0, psp\n" + : "=r"(result)); + return (result); } - /** \brief Set Process Stack Pointer This function assigns the given value to the Process Stack Pointer (PSP). \param [in] topOfProcStack Process Stack Pointer value to set */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) { - __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp"); + __ASM volatile("MSR psp, %0\n" + : + : "r"(topOfProcStack) + : "sp"); } - /** \brief Get Main Stack Pointer This function returns the current value of the Main Stack Pointer (MSP). \return MSP Register value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void) { - register uint32_t result; + register uint32_t result; - __ASM volatile ("MRS %0, msp\n" : "=r" (result) ); - return(result); + __ASM volatile("MRS %0, msp\n" + : "=r"(result)); + return (result); } - /** \brief Set Main Stack Pointer This function assigns the given value to the Main Stack Pointer (MSP). \param [in] topOfMainStack Main Stack Pointer value to set */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) { - __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp"); + __ASM volatile("MSR msp, %0\n" + : + : "r"(topOfMainStack) + : "sp"); } - /** \brief Get Priority Mask This function returns the current state of the priority mask bit from the Priority Mask Register. \return Priority Mask value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void) { - uint32_t result; + uint32_t result; - __ASM volatile ("MRS %0, primask" : "=r" (result) ); - return(result); + __ASM volatile("MRS %0, primask" + : "=r"(result)); + return (result); } - /** \brief Set Priority Mask This function assigns the given value to the Priority Mask Register. \param [in] priMask Priority Mask */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) { - __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); + __ASM volatile("MSR primask, %0" + : + : "r"(priMask) + : "memory"); } - -#if (__CORTEX_M >= 0x03) +#if (__CORTEX_M >= 0x03) /** \brief Enable FIQ This function enables FIQ interrupts by clearing the F-bit in the CPSR. Can only be executed in Privileged modes. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void) +__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void) { - __ASM volatile ("cpsie f" : : : "memory"); + __ASM volatile("cpsie f" + : + : + : "memory"); } - /** \brief Disable FIQ This function disables FIQ interrupts by setting the F-bit in the CPSR. Can only be executed in Privileged modes. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void) +__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void) { - __ASM volatile ("cpsid f" : : : "memory"); + __ASM volatile("cpsid f" + : + : + : "memory"); } - /** \brief Get Base Priority This function returns the current value of the Base Priority register. \return Base Priority register value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void) { - uint32_t result; + uint32_t result; - __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); - return(result); + __ASM volatile("MRS %0, basepri_max" + : "=r"(result)); + return (result); } - /** \brief Set Base Priority This function assigns the given value to the Base Priority register. \param [in] basePri Base Priority value to set */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value) +__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value) { - __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory"); + __ASM volatile("MSR basepri, %0" + : + : "r"(value) + : "memory"); } - /** \brief Get Fault Mask This function returns the current value of the Fault Mask register. \return Fault Mask register value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void) { - uint32_t result; + uint32_t result; - __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); - return(result); + __ASM volatile("MRS %0, faultmask" + : "=r"(result)); + return (result); } - /** \brief Set Fault Mask This function assigns the given value to the Fault Mask register. \param [in] faultMask Fault Mask value to set */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) { - __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); + __ASM volatile("MSR faultmask, %0" + : + : "r"(faultMask) + : "memory"); } #endif /* (__CORTEX_M >= 0x03) */ - -#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) +#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) /** \brief Get FPSCR @@ -572,52 +571,52 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t \return Floating Point Status/Control register value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void) { #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) - uint32_t result; + uint32_t result; - /* Empty asm statement works as a scheduling barrier */ - __ASM volatile (""); - __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); - __ASM volatile (""); - return(result); + /* Empty asm statement works as a scheduling barrier */ + __ASM volatile(""); + __ASM volatile("VMRS %0, fpscr" + : "=r"(result)); + __ASM volatile(""); + return (result); #else - return(0); + return (0); #endif } - /** \brief Set FPSCR This function assigns the given value to the Floating Point Status/Control register. \param [in] fpscr Floating Point Status/Control value to set */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) { #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) - /* Empty asm statement works as a scheduling barrier */ - __ASM volatile (""); - __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc"); - __ASM volatile (""); + /* Empty asm statement works as a scheduling barrier */ + __ASM volatile(""); + __ASM volatile("VMSR fpscr, %0" + : + : "r"(fpscr) + : "vfpcc"); + __ASM volatile(""); #endif } #endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */ - -#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +#elif defined(__ICCARM__) /*------------------ ICC Compiler -------------------*/ /* IAR iccarm specific functions */ #include - -#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ +#elif defined(__TMS470__) /*---------------- TI CCS Compiler ------------------*/ /* TI CCS specific functions */ #include - -#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +#elif defined(__TASKING__) /*------------------ TASKING Compiler --------------*/ /* TASKING carm specific functions */ /* * The CMSIS functions have been implemented as intrinsics in the compiler. @@ -625,8 +624,7 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fps * Including the CMSIS ones. */ - -#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/ +#elif defined(__CSMC__) /*------------------ COSMIC Compiler -------------------*/ /* Cosmic specific functions */ #include diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmInstr.h b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmInstr.h index d14110b2ab..6d1a9e9f8f 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmInstr.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmInstr.h @@ -1,4 +1,4 @@ -/**************************************************************************//** +/**************************************************************************/ /** * @file core_cmInstr.h * @brief CMSIS Cortex-M Core Instruction Access Header File * @version V4.00 @@ -34,54 +34,47 @@ POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - #ifndef __CORE_CMINSTR_H #define __CORE_CMINSTR_H - /* ########################## Core Instruction Access ######################### */ /** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface Access to dedicated instructions @{ */ -#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +#if defined(__CC_ARM) /*------------------RealView Compiler -----------------*/ /* ARM armcc specific functions */ #if (__ARMCC_VERSION < 400677) - #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#error "Please use ARM Compiler Toolchain V4.0.677 or later!" #endif - /** \brief No Operation No Operation does nothing. This instruction can be used for code alignment purposes. */ -#define __NOP __nop - +#define __NOP __nop /** \brief Wait For Interrupt Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. */ -#define __WFI __wfi - +#define __WFI __wfi /** \brief Wait For Event Wait For Event is a hint instruction that permits the processor to enter a low-power state until one of a number of events occurs. */ -#define __WFE __wfe - +#define __WFE __wfe /** \brief Send Event Send Event is a hint instruction. It causes an event to be signaled to the CPU. */ -#define __SEV __sev - +#define __SEV __sev /** \brief Instruction Synchronization Barrier @@ -89,24 +82,21 @@ so that all instructions following the ISB are fetched from cache or memory, after the instruction has been completed. */ -#define __ISB() __isb(0xF) - +#define __ISB() __isb(0xF) /** \brief Data Synchronization Barrier This function acts as a special kind of Data Memory Barrier. It completes when all explicit memory accesses before this instruction complete. */ -#define __DSB() __dsb(0xF) - +#define __DSB() __dsb(0xF) /** \brief Data Memory Barrier This function ensures the apparent order of the explicit memory operations before and after the instruction, without ensuring their completion. */ -#define __DMB() __dmb(0xF) - +#define __DMB() __dmb(0xF) /** \brief Reverse byte order (32 bit) @@ -115,8 +105,7 @@ \param [in] value Value to reverse \return Reversed value */ -#define __REV __rev - +#define __REV __rev /** \brief Reverse byte order (16 bit) @@ -128,8 +117,8 @@ #ifndef __NO_EMBEDDED_ASM __attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) { - rev16 r0, r0 - bx lr + rev16 r0, r0 + bx lr } #endif @@ -143,12 +132,11 @@ __attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(u #ifndef __NO_EMBEDDED_ASM __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value) { - revsh r0, r0 - bx lr + revsh r0, r0 + bx lr } #endif - /** \brief Rotate Right in unsigned value (32 bit) This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. @@ -157,8 +145,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \param [in] value Number of Bits to rotate \return Rotated value */ -#define __ROR __ror - +#define __ROR __ror /** \brief Breakpoint @@ -168,10 +155,9 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \param [in] value is ignored by the processor. If required, a debugger can use it to store additional information about the breakpoint. */ -#define __BKPT(value) __breakpoint(value) +#define __BKPT(value) __breakpoint(value) - -#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) +#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) /** \brief Reverse bit order of value @@ -180,8 +166,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \param [in] value Value to reverse \return Reversed value */ -#define __RBIT __rbit - +#define __RBIT __rbit /** \brief LDR Exclusive (8 bit) @@ -190,8 +175,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \param [in] ptr Pointer to data \return value of type uint8_t at (*ptr) */ -#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) - +#define __LDREXB(ptr) ((uint8_t)__ldrex(ptr)) /** \brief LDR Exclusive (16 bit) @@ -200,8 +184,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \param [in] ptr Pointer to data \return value of type uint16_t at (*ptr) */ -#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) - +#define __LDREXH(ptr) ((uint16_t)__ldrex(ptr)) /** \brief LDR Exclusive (32 bit) @@ -210,8 +193,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \param [in] ptr Pointer to data \return value of type uint32_t at (*ptr) */ -#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) - +#define __LDREXW(ptr) ((uint32_t)__ldrex(ptr)) /** \brief STR Exclusive (8 bit) @@ -222,8 +204,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \return 0 Function succeeded \return 1 Function failed */ -#define __STREXB(value, ptr) __strex(value, ptr) - +#define __STREXB(value, ptr) __strex(value, ptr) /** \brief STR Exclusive (16 bit) @@ -234,8 +215,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \return 0 Function succeeded \return 1 Function failed */ -#define __STREXH(value, ptr) __strex(value, ptr) - +#define __STREXH(value, ptr) __strex(value, ptr) /** \brief STR Exclusive (32 bit) @@ -246,16 +226,14 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \return 0 Function succeeded \return 1 Function failed */ -#define __STREXW(value, ptr) __strex(value, ptr) - +#define __STREXW(value, ptr) __strex(value, ptr) /** \brief Remove the exclusive lock This function removes the exclusive lock which is created by LDREX. */ -#define __CLREX __clrex - +#define __CLREX __clrex /** \brief Signed Saturate @@ -265,8 +243,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \param [in] sat Bit position to saturate to (1..32) \return Saturated value */ -#define __SSAT __ssat - +#define __SSAT __ssat /** \brief Unsigned Saturate @@ -276,8 +253,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \param [in] sat Bit position to saturate to (0..31) \return Saturated value */ -#define __USAT __usat - +#define __USAT __usat /** \brief Count leading zeros @@ -286,8 +262,7 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in \param [in] value Value to count the leading zeros \return number of leading zeros in value */ -#define __CLZ __clz - +#define __CLZ __clz /** \brief Rotate Right with Extend (32 bit) @@ -299,12 +274,11 @@ __attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(in #ifndef __NO_EMBEDDED_ASM __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) { - rrx r0, r0 - bx lr + rrx r0, r0 + bx lr } #endif - /** \brief LDRT Unprivileged (8 bit) This function executes a Unprivileged LDRT instruction for 8 bit value. @@ -312,8 +286,7 @@ __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint3 \param [in] ptr Pointer to data \return value of type uint8_t at (*ptr) */ -#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) - +#define __LDRBT(ptr) ((uint8_t)__ldrt(ptr)) /** \brief LDRT Unprivileged (16 bit) @@ -322,8 +295,7 @@ __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint3 \param [in] ptr Pointer to data \return value of type uint16_t at (*ptr) */ -#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) - +#define __LDRHT(ptr) ((uint16_t)__ldrt(ptr)) /** \brief LDRT Unprivileged (32 bit) @@ -332,8 +304,7 @@ __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint3 \param [in] ptr Pointer to data \return value of type uint32_t at (*ptr) */ -#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) - +#define __LDRT(ptr) ((uint32_t)__ldrt(ptr)) /** \brief STRT Unprivileged (8 bit) @@ -342,8 +313,7 @@ __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint3 \param [in] value Value to store \param [in] ptr Pointer to location */ -#define __STRBT(value, ptr) __strt(value, ptr) - +#define __STRBT(value, ptr) __strt(value, ptr) /** \brief STRT Unprivileged (16 bit) @@ -352,8 +322,7 @@ __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint3 \param [in] value Value to store \param [in] ptr Pointer to location */ -#define __STRHT(value, ptr) __strt(value, ptr) - +#define __STRHT(value, ptr) __strt(value, ptr) /** \brief STRT Unprivileged (32 bit) @@ -362,101 +331,93 @@ __attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint3 \param [in] value Value to store \param [in] ptr Pointer to location */ -#define __STRT(value, ptr) __strt(value, ptr) +#define __STRT(value, ptr) __strt(value, ptr) #endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */ - -#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +#elif defined(__GNUC__) /*------------------ GNU Compiler ---------------------*/ /* GNU gcc specific functions */ /* Define macros for porting to both thumb1 and thumb2. * For thumb1, use low register (r0-r7), specified by constrant "l" * Otherwise, use general registers, specified by constrant "r" */ -#if defined (__thumb__) && !defined (__thumb2__) -#define __CMSIS_GCC_OUT_REG(r) "=l" (r) -#define __CMSIS_GCC_USE_REG(r) "l" (r) +#if defined(__thumb__) && !defined(__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l"(r) +#define __CMSIS_GCC_USE_REG(r) "l"(r) #else -#define __CMSIS_GCC_OUT_REG(r) "=r" (r) -#define __CMSIS_GCC_USE_REG(r) "r" (r) +#define __CMSIS_GCC_OUT_REG(r) "=r"(r) +#define __CMSIS_GCC_USE_REG(r) "r"(r) #endif /** \brief No Operation No Operation does nothing. This instruction can be used for code alignment purposes. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void) +__attribute__((always_inline)) __STATIC_INLINE void __NOP(void) { - __ASM volatile ("nop"); + __ASM volatile("nop"); } - /** \brief Wait For Interrupt Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void) +__attribute__((always_inline)) __STATIC_INLINE void __WFI(void) { - __ASM volatile ("wfi"); + __ASM volatile("wfi"); } - /** \brief Wait For Event Wait For Event is a hint instruction that permits the processor to enter a low-power state until one of a number of events occurs. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void) +__attribute__((always_inline)) __STATIC_INLINE void __WFE(void) { - __ASM volatile ("wfe"); + __ASM volatile("wfe"); } - /** \brief Send Event Send Event is a hint instruction. It causes an event to be signaled to the CPU. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void) +__attribute__((always_inline)) __STATIC_INLINE void __SEV(void) { - __ASM volatile ("sev"); + __ASM volatile("sev"); } - /** \brief Instruction Synchronization Barrier Instruction Synchronization Barrier flushes the pipeline in the processor, so that all instructions following the ISB are fetched from cache or memory, after the instruction has been completed. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void) +__attribute__((always_inline)) __STATIC_INLINE void __ISB(void) { - __ASM volatile ("isb"); + __ASM volatile("isb"); } - /** \brief Data Synchronization Barrier This function acts as a special kind of Data Memory Barrier. It completes when all explicit memory accesses before this instruction complete. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void) +__attribute__((always_inline)) __STATIC_INLINE void __DSB(void) { - __ASM volatile ("dsb"); + __ASM volatile("dsb"); } - /** \brief Data Memory Barrier This function ensures the apparent order of the explicit memory operations before and after the instruction, without ensuring their completion. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void) +__attribute__((always_inline)) __STATIC_INLINE void __DMB(void) { - __ASM volatile ("dmb"); + __ASM volatile("dmb"); } - /** \brief Reverse byte order (32 bit) This function reverses the byte order in integer value. @@ -464,19 +425,20 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void) \param [in] value Value to reverse \return Reversed value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value) { #if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) - return __builtin_bswap32(value); + return __builtin_bswap32(value); #else - uint32_t result; + uint32_t result; - __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); + __ASM volatile("rev %0, %1" + : __CMSIS_GCC_OUT_REG(result) + : __CMSIS_GCC_USE_REG(value)); + return (result); #endif } - /** \brief Reverse byte order (16 bit) This function reverses the byte order in two unsigned short values. @@ -484,15 +446,16 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value \param [in] value Value to reverse \return Reversed value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value) { - uint32_t result; + uint32_t result; - __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); + __ASM volatile("rev16 %0, %1" + : __CMSIS_GCC_OUT_REG(result) + : __CMSIS_GCC_USE_REG(value)); + return (result); } - /** \brief Reverse byte order in signed short value This function reverses the byte order in a signed short value with sign extension to integer. @@ -500,19 +463,20 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t val \param [in] value Value to reverse \return Reversed value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value) +__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value) { #if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - return (short)__builtin_bswap16(value); + return (short)__builtin_bswap16(value); #else - uint32_t result; + uint32_t result; - __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); + __ASM volatile("revsh %0, %1" + : __CMSIS_GCC_OUT_REG(result) + : __CMSIS_GCC_USE_REG(value)); + return (result); #endif } - /** \brief Rotate Right in unsigned value (32 bit) This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. @@ -521,12 +485,11 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value \param [in] value Number of Bits to rotate \return Rotated value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) { - return (op1 >> op2) | (op1 << (32 - op2)); + return (op1 >> op2) | (op1 << (32 - op2)); } - /** \brief Breakpoint This function causes the processor to enter Debug state. @@ -535,10 +498,9 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, \param [in] value is ignored by the processor. If required, a debugger can use it to store additional information about the breakpoint. */ -#define __BKPT(value) __ASM volatile ("bkpt "#value) +#define __BKPT(value) __ASM volatile("bkpt " #value) - -#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) +#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) /** \brief Reverse bit order of value @@ -547,15 +509,16 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, \param [in] value Value to reverse \return Reversed value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) { - uint32_t result; + uint32_t result; - __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); - return(result); + __ASM volatile("rbit %0, %1" + : "=r"(result) + : "r"(value)); + return (result); } - /** \brief LDR Exclusive (8 bit) This function executes a exclusive LDR instruction for 8 bit value. @@ -563,22 +526,26 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t valu \param [in] ptr Pointer to data \return value of type uint8_t at (*ptr) */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr) +__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr) { uint32_t result; #if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); + __ASM volatile("ldrexb %0, %1" + : "=r"(result) + : "Q"(*addr)); #else /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not accepted by assembler. So has to use following less efficient pattern. */ - __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); + __ASM volatile("ldrexb %0, [%1]" + : "=r"(result) + : "r"(addr) + : "memory"); #endif - return ((uint8_t) result); /* Add explicit type cast here */ + return ((uint8_t)result); /* Add explicit type cast here */ } - /** \brief LDR Exclusive (16 bit) This function executes a exclusive LDR instruction for 16 bit values. @@ -586,22 +553,26 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uin \param [in] ptr Pointer to data \return value of type uint16_t at (*ptr) */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr) +__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr) { uint32_t result; #if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); + __ASM volatile("ldrexh %0, %1" + : "=r"(result) + : "Q"(*addr)); #else /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not accepted by assembler. So has to use following less efficient pattern. */ - __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); + __ASM volatile("ldrexh %0, [%1]" + : "=r"(result) + : "r"(addr) + : "memory"); #endif - return ((uint16_t) result); /* Add explicit type cast here */ + return ((uint16_t)result); /* Add explicit type cast here */ } - /** \brief LDR Exclusive (32 bit) This function executes a exclusive LDR instruction for 32 bit values. @@ -609,15 +580,16 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile ui \param [in] ptr Pointer to data \return value of type uint32_t at (*ptr) */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr) { uint32_t result; - __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); - return(result); + __ASM volatile("ldrex %0, %1" + : "=r"(result) + : "Q"(*addr)); + return (result); } - /** \brief STR Exclusive (8 bit) This function executes a exclusive STR instruction for 8 bit values. @@ -627,15 +599,16 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile ui \return 0 Function succeeded \return 1 Function failed */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) { - uint32_t result; + uint32_t result; - __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); - return(result); + __ASM volatile("strexb %0, %2, %1" + : "=&r"(result), "=Q"(*addr) + : "r"((uint32_t)value)); + return (result); } - /** \brief STR Exclusive (16 bit) This function executes a exclusive STR instruction for 16 bit values. @@ -645,15 +618,16 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t val \return 0 Function succeeded \return 1 Function failed */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) { - uint32_t result; + uint32_t result; - __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); - return(result); + __ASM volatile("strexh %0, %2, %1" + : "=&r"(result), "=Q"(*addr) + : "r"((uint32_t)value)); + return (result); } - /** \brief STR Exclusive (32 bit) This function executes a exclusive STR instruction for 32 bit values. @@ -663,26 +637,27 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t va \return 0 Function succeeded \return 1 Function failed */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) { - uint32_t result; + uint32_t result; - __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); - return(result); + __ASM volatile("strex %0, %2, %1" + : "=&r"(result), "=Q"(*addr) + : "r"(value)); + return (result); } - /** \brief Remove the exclusive lock This function removes the exclusive lock which is created by LDREX. */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void) +__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void) { - __ASM volatile ("clrex" ::: "memory"); + __ASM volatile("clrex" :: + : "memory"); } - /** \brief Signed Saturate This function saturates a signed value. @@ -691,13 +666,15 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void) \param [in] sat Bit position to saturate to (1..32) \return Saturated value */ -#define __SSAT(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - +#define __SSAT(ARG1, ARG2) \ + ( \ + { \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM("ssat %0, %1, %2" \ + : "=r"(__RES) \ + : "I"(ARG2), "r"(__ARG1)); \ + __RES; \ + }) /** \brief Unsigned Saturate @@ -707,13 +684,15 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void) \param [in] sat Bit position to saturate to (0..31) \return Saturated value */ -#define __USAT(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - +#define __USAT(ARG1, ARG2) \ + ( \ + { \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM("usat %0, %1, %2" \ + : "=r"(__RES) \ + : "I"(ARG2), "r"(__ARG1)); \ + __RES; \ + }) /** \brief Count leading zeros @@ -722,15 +701,16 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void) \param [in] value Value to count the leading zeros \return number of leading zeros in value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value) +__attribute__((always_inline)) __STATIC_INLINE uint8_t __CLZ(uint32_t value) { - uint32_t result; + uint32_t result; - __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) ); - return ((uint8_t) result); /* Add explicit type cast here */ + __ASM volatile("clz %0, %1" + : "=r"(result) + : "r"(value)); + return ((uint8_t)result); /* Add explicit type cast here */ } - /** \brief Rotate Right with Extend (32 bit) This function moves each bit of a bitstring right by one bit. The carry input is shifted in at the left end of the bitstring. @@ -738,15 +718,16 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value) \param [in] value Value to rotate \return Rotated value */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RRX(uint32_t value) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value) { - uint32_t result; + uint32_t result; - __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); + __ASM volatile("rrx %0, %1" + : __CMSIS_GCC_OUT_REG(result) + : __CMSIS_GCC_USE_REG(value)); + return (result); } - /** \brief LDRT Unprivileged (8 bit) This function executes a Unprivileged LDRT instruction for 8 bit value. @@ -754,22 +735,26 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RRX(uint32_t value \param [in] ptr Pointer to data \return value of type uint8_t at (*ptr) */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr) +__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr) { uint32_t result; #if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) ); + __ASM volatile("ldrbt %0, %1" + : "=r"(result) + : "Q"(*addr)); #else /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not accepted by assembler. So has to use following less efficient pattern. */ - __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); + __ASM volatile("ldrbt %0, [%1]" + : "=r"(result) + : "r"(addr) + : "memory"); #endif - return ((uint8_t) result); /* Add explicit type cast here */ + return ((uint8_t)result); /* Add explicit type cast here */ } - /** \brief LDRT Unprivileged (16 bit) This function executes a Unprivileged LDRT instruction for 16 bit values. @@ -777,22 +762,26 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDRBT(volatile uint \param [in] ptr Pointer to data \return value of type uint16_t at (*ptr) */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr) +__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr) { uint32_t result; #if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) ); + __ASM volatile("ldrht %0, %1" + : "=r"(result) + : "Q"(*addr)); #else /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not accepted by assembler. So has to use following less efficient pattern. */ - __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); + __ASM volatile("ldrht %0, [%1]" + : "=r"(result) + : "r"(addr) + : "memory"); #endif - return ((uint16_t) result); /* Add explicit type cast here */ + return ((uint16_t)result); /* Add explicit type cast here */ } - /** \brief LDRT Unprivileged (32 bit) This function executes a Unprivileged LDRT instruction for 32 bit values. @@ -800,15 +789,16 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDRHT(volatile uin \param [in] ptr Pointer to data \return value of type uint32_t at (*ptr) */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr) { uint32_t result; - __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) ); - return(result); + __ASM volatile("ldrt %0, %1" + : "=r"(result) + : "Q"(*addr)); + return (result); } - /** \brief STRT Unprivileged (8 bit) This function executes a Unprivileged STRT instruction for 8 bit values. @@ -816,12 +806,13 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDRT(volatile uint \param [in] value Value to store \param [in] ptr Pointer to location */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr) +__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr) { - __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) ); + __ASM volatile("strbt %1, %0" + : "=Q"(*addr) + : "r"((uint32_t)value)); } - /** \brief STRT Unprivileged (16 bit) This function executes a Unprivileged STRT instruction for 16 bit values. @@ -829,12 +820,13 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE void __STRBT(uint8_t value, v \param [in] value Value to store \param [in] ptr Pointer to location */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr) +__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr) { - __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) ); + __ASM volatile("strht %1, %0" + : "=Q"(*addr) + : "r"((uint32_t)value)); } - /** \brief STRT Unprivileged (32 bit) This function executes a Unprivileged STRT instruction for 32 bit values. @@ -842,25 +834,24 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE void __STRHT(uint16_t value, \param [in] value Value to store \param [in] ptr Pointer to location */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr) +__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr) { - __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) ); + __ASM volatile("strt %1, %0" + : "=Q"(*addr) + : "r"(value)); } #endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */ - -#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +#elif defined(__ICCARM__) /*------------------ ICC Compiler -------------------*/ /* IAR iccarm specific functions */ #include - -#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ +#elif defined(__TMS470__) /*---------------- TI CCS Compiler ------------------*/ /* TI CCS specific functions */ #include - -#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +#elif defined(__TASKING__) /*------------------ TASKING Compiler --------------*/ /* TASKING carm specific functions */ /* * The CMSIS functions have been implemented as intrinsics in the compiler. @@ -868,8 +859,7 @@ __attribute__( ( always_inline ) ) __STATIC_INLINE void __STRT(uint32_t value, v * Including the CMSIS ones. */ - -#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/ +#elif defined(__CSMC__) /*------------------ COSMIC Compiler -------------------*/ /* Cosmic specific functions */ #include diff --git a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmSimd.h b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmSimd.h index ee58eee56d..1997067d11 100644 --- a/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmSimd.h +++ b/bsp/swm320/libraries/CMSIS/CoreSupport/core_cmSimd.h @@ -1,4 +1,4 @@ -/**************************************************************************//** +/**************************************************************************/ /** * @file core_cmSimd.h * @brief CMSIS Cortex-M SIMD Header File * @version V4.00 @@ -34,661 +34,794 @@ POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ +#if defined(__ICCARM__) +#pragma system_include /* treat file as system include file for MISRA check */ #endif #ifndef __CORE_CMSIMD_H #define __CORE_CMSIMD_H #ifdef __cplusplus - extern "C" { +extern "C" +{ #endif - -/******************************************************************************* + /******************************************************************************* * Hardware Abstraction Layer ******************************************************************************/ - -/* ################### Compiler specific Intrinsics ########################### */ -/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + /* ################### Compiler specific Intrinsics ########################### */ + /** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics Access to dedicated SIMD instructions @{ */ -#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +#if defined(__CC_ARM) /*------------------RealView Compiler -----------------*/ /* ARM armcc specific functions */ -#define __SADD8 __sadd8 -#define __QADD8 __qadd8 -#define __SHADD8 __shadd8 -#define __UADD8 __uadd8 -#define __UQADD8 __uqadd8 -#define __UHADD8 __uhadd8 -#define __SSUB8 __ssub8 -#define __QSUB8 __qsub8 -#define __SHSUB8 __shsub8 -#define __USUB8 __usub8 -#define __UQSUB8 __uqsub8 -#define __UHSUB8 __uhsub8 -#define __SADD16 __sadd16 -#define __QADD16 __qadd16 -#define __SHADD16 __shadd16 -#define __UADD16 __uadd16 -#define __UQADD16 __uqadd16 -#define __UHADD16 __uhadd16 -#define __SSUB16 __ssub16 -#define __QSUB16 __qsub16 -#define __SHSUB16 __shsub16 -#define __USUB16 __usub16 -#define __UQSUB16 __uqsub16 -#define __UHSUB16 __uhsub16 -#define __SASX __sasx -#define __QASX __qasx -#define __SHASX __shasx -#define __UASX __uasx -#define __UQASX __uqasx -#define __UHASX __uhasx -#define __SSAX __ssax -#define __QSAX __qsax -#define __SHSAX __shsax -#define __USAX __usax -#define __UQSAX __uqsax -#define __UHSAX __uhsax -#define __USAD8 __usad8 -#define __USADA8 __usada8 -#define __SSAT16 __ssat16 -#define __USAT16 __usat16 -#define __UXTB16 __uxtb16 -#define __UXTAB16 __uxtab16 -#define __SXTB16 __sxtb16 -#define __SXTAB16 __sxtab16 -#define __SMUAD __smuad -#define __SMUADX __smuadx -#define __SMLAD __smlad -#define __SMLADX __smladx -#define __SMLALD __smlald -#define __SMLALDX __smlaldx -#define __SMUSD __smusd -#define __SMUSDX __smusdx -#define __SMLSD __smlsd -#define __SMLSDX __smlsdx -#define __SMLSLD __smlsld -#define __SMLSLDX __smlsldx -#define __SEL __sel -#define __QADD __qadd -#define __QSUB __qsub +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub -#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ - ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) +#define __PKHBT(ARG1, ARG2, ARG3) (((((uint32_t)(ARG1))) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)) -#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ - ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) +#define __PKHTB(ARG1, ARG2, ARG3) (((((uint32_t)(ARG1))) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)) -#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ - ((int64_t)(ARG3) << 32) ) >> 32)) +#define __SMMLA(ARG1, ARG2, ARG3) ((int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32)) >> \ + 32)) - -#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +#elif defined(__GNUC__) /*------------------ GNU Compiler ---------------------*/ /* GNU gcc specific functions */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("sadd8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("qadd8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("shadd8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uadd8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uqadd8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uhadd8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("ssub8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("qsub8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("shsub8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("usub8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uqsub8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uhsub8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("sadd16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("qadd16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("shadd16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uadd16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uqadd16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uhadd16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("ssub16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("qsub16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("shsub16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("usub16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uqsub16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uhsub16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("sasx %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("qasx %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("shasx %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uasx %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uqasx %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uhasx %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("ssax %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("qsax %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("shsax %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("usax %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uqsax %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uhsax %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("usad8 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) { - uint32_t result; + uint32_t result; - __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); + __ASM volatile("usada8 %0, %1, %2, %3" + : "=r"(result) + : "r"(op1), "r"(op2), "r"(op3)); + return (result); } -#define __SSAT16(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) +#define __SSAT16(ARG1, ARG2) \ + ( \ + { \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM("ssat16 %0, %1, %2" \ + : "=r"(__RES) \ + : "I"(ARG2), "r"(__ARG1)); \ + __RES; \ + }) -#define __USAT16(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) +#define __USAT16(ARG1, ARG2) \ + ( \ + { \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM("usat16 %0, %1, %2" \ + : "=r"(__RES) \ + : "I"(ARG2), "r"(__ARG1)); \ + __RES; \ + }) -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1) { - uint32_t result; + uint32_t result; - __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); + __ASM volatile("uxtb16 %0, %1" + : "=r"(result) + : "r"(op1)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("uxtab16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1) { - uint32_t result; + uint32_t result; - __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); + __ASM volatile("sxtb16 %0, %1" + : "=r"(result) + : "r"(op1)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("sxtab16 %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("smuad %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("smuadx %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD(uint32_t op1, uint32_t op2, uint32_t op3) { - uint32_t result; + uint32_t result; - __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); + __ASM volatile("smlad %0, %1, %2, %3" + : "=r"(result) + : "r"(op1), "r"(op2), "r"(op3)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX(uint32_t op1, uint32_t op2, uint32_t op3) { - uint32_t result; + uint32_t result; - __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); + __ASM volatile("smladx %0, %1, %2, %3" + : "=r"(result) + : "r"(op1), "r"(op2), "r"(op3)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD(uint32_t op1, uint32_t op2, uint64_t acc) { - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; + union llreg_u + { + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; -#ifndef __ARMEB__ // Little endian - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else // Big endian - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#ifndef __ARMEB__ // Little endian + __ASM volatile("smlald %0, %1, %2, %3" + : "=r"(llr.w32[0]), "=r"(llr.w32[1]) + : "r"(op1), "r"(op2), "0"(llr.w32[0]), "1"(llr.w32[1])); +#else // Big endian + __ASM volatile("smlald %0, %1, %2, %3" + : "=r"(llr.w32[1]), "=r"(llr.w32[0]) + : "r"(op1), "r"(op2), "0"(llr.w32[1]), "1"(llr.w32[0])); #endif - return(llr.w64); + return (llr.w64); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX(uint32_t op1, uint32_t op2, uint64_t acc) { - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; + union llreg_u + { + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; -#ifndef __ARMEB__ // Little endian - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else // Big endian - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#ifndef __ARMEB__ // Little endian + __ASM volatile("smlaldx %0, %1, %2, %3" + : "=r"(llr.w32[0]), "=r"(llr.w32[1]) + : "r"(op1), "r"(op2), "0"(llr.w32[0]), "1"(llr.w32[1])); +#else // Big endian + __ASM volatile("smlaldx %0, %1, %2, %3" + : "=r"(llr.w32[1]), "=r"(llr.w32[0]) + : "r"(op1), "r"(op2), "0"(llr.w32[1]), "1"(llr.w32[0])); #endif - return(llr.w64); + return (llr.w64); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("smusd %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("smusdx %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD(uint32_t op1, uint32_t op2, uint32_t op3) { - uint32_t result; + uint32_t result; - __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); + __ASM volatile("smlsd %0, %1, %2, %3" + : "=r"(result) + : "r"(op1), "r"(op2), "r"(op3)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX(uint32_t op1, uint32_t op2, uint32_t op3) { - uint32_t result; + uint32_t result; - __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); + __ASM volatile("smlsdx %0, %1, %2, %3" + : "=r"(result) + : "r"(op1), "r"(op2), "r"(op3)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD(uint32_t op1, uint32_t op2, uint64_t acc) { - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; + union llreg_u + { + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; -#ifndef __ARMEB__ // Little endian - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else // Big endian - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#ifndef __ARMEB__ // Little endian + __ASM volatile("smlsld %0, %1, %2, %3" + : "=r"(llr.w32[0]), "=r"(llr.w32[1]) + : "r"(op1), "r"(op2), "0"(llr.w32[0]), "1"(llr.w32[1])); +#else // Big endian + __ASM volatile("smlsld %0, %1, %2, %3" + : "=r"(llr.w32[1]), "=r"(llr.w32[0]) + : "r"(op1), "r"(op2), "0"(llr.w32[1]), "1"(llr.w32[0])); #endif - return(llr.w64); + return (llr.w64); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX(uint32_t op1, uint32_t op2, uint64_t acc) { - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; + union llreg_u + { + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; -#ifndef __ARMEB__ // Little endian - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else // Big endian - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#ifndef __ARMEB__ // Little endian + __ASM volatile("smlsldx %0, %1, %2, %3" + : "=r"(llr.w32[0]), "=r"(llr.w32[1]) + : "r"(op1), "r"(op2), "0"(llr.w32[0]), "1"(llr.w32[1])); +#else // Big endian + __ASM volatile("smlsldx %0, %1, %2, %3" + : "=r"(llr.w32[1]), "=r"(llr.w32[0]) + : "r"(op1), "r"(op2), "0"(llr.w32[1]), "1"(llr.w32[0])); #endif - return(llr.w64); + return (llr.w64); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("sel %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("qadd %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2) { - uint32_t result; + uint32_t result; - __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); + __ASM volatile("qsub %0, %1, %2" + : "=r"(result) + : "r"(op1), "r"(op2)); + return (result); } -#define __PKHBT(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) +#define __PKHBT(ARG1, ARG2, ARG3) \ + ( \ + { \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM("pkhbt %0, %1, %2, lsl %3" \ + : "=r"(__RES) \ + : "r"(__ARG1), "r"(__ARG2), "I"(ARG3)); \ + __RES; \ + }) -#define __PKHTB(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - if (ARG3 == 0) \ - __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ - else \ - __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) +#define __PKHTB(ARG1, ARG2, ARG3) \ + ( \ + { \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM("pkhtb %0, %1, %2" \ + : "=r"(__RES) \ + : "r"(__ARG1), "r"(__ARG2)); \ + else \ + __ASM("pkhtb %0, %1, %2, asr %3" \ + : "=r"(__RES) \ + : "r"(__ARG1), "r"(__ARG2), "I"(ARG3)); \ + __RES; \ + }) -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA(int32_t op1, int32_t op2, int32_t op3) { - int32_t result; + int32_t result; - __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); - return(result); + __ASM volatile("smmla %0, %1, %2, %3" + : "=r"(result) + : "r"(op1), "r"(op2), "r"(op3)); + return (result); } - -#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +#elif defined(__ICCARM__) /*------------------ ICC Compiler -------------------*/ /* IAR iccarm specific functions */ #include - -#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ +#elif defined(__TMS470__) /*---------------- TI CCS Compiler ------------------*/ /* TI CCS specific functions */ #include - -#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +#elif defined(__TASKING__) /*------------------ TASKING Compiler --------------*/ /* TASKING carm specific functions */ /* not yet supported */ - -#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/ +#elif defined(__CSMC__) /*------------------ COSMIC Compiler -------------------*/ /* Cosmic specific functions */ #include #endif -/*@} end of group CMSIS_SIMD_intrinsics */ - + /*@} end of group CMSIS_SIMD_intrinsics */ #ifdef __cplusplus } diff --git a/bsp/swm320/libraries/CMSIS/DeviceSupport/SWM320.h b/bsp/swm320/libraries/CMSIS/DeviceSupport/SWM320.h index 5aa6db83fa..8e4a3e041c 100644 --- a/bsp/swm320/libraries/CMSIS/DeviceSupport/SWM320.h +++ b/bsp/swm320/libraries/CMSIS/DeviceSupport/SWM320.h @@ -105,11 +105,11 @@ typedef enum IRQn #endif #include -#include "core_cm4.h" /* Cortex-M0 processor and core peripherals */ +#include "core_cm4.h" /* Cortex-M0 processor and core peripherals */ #include "system_SWM320.h" /******************************************************************************/ -/* Device Specific Peripheral registers structures */ +/* Device Specific Peripheral registers structures */ /******************************************************************************/ typedef struct { @@ -181,11 +181,11 @@ typedef struct __IO uint32_t ADC1IN7; } SYS_TypeDef; -#define SYS_CLKSEL_LFCK_Pos 0 //Low Frequency Clock Source 0 LRC 1 PLL +#define SYS_CLKSEL_LFCK_Pos 0 //Low Frequency Clock Source 0 LRC 1 PLL #define SYS_CLKSEL_LFCK_Msk (0x01 << SYS_CLKSEL_LFCK_Pos) -#define SYS_CLKSEL_HFCK_Pos 1 //High Frequency Clock Source 0 HRC 1 XTAL +#define SYS_CLKSEL_HFCK_Pos 1 //High Frequency Clock Source 0 HRC 1 XTAL #define SYS_CLKSEL_HFCK_Msk (0x01 << SYS_CLKSEL_HFCK_Pos) -#define SYS_CLKSEL_SYS_Pos 2 //系统时钟选择 0 LFCK 1 HFCK +#define SYS_CLKSEL_SYS_Pos 2 //系统时钟选择 0 LFCK 1 HFCK #define SYS_CLKSEL_SYS_Msk (0x01 << SYS_CLKSEL_SYS_Pos) #define SYS_CLKDIV_SYS_Pos 0 //系统时钟分频 0 1分频 1 2分频 @@ -312,7 +312,7 @@ typedef struct #define SYS_LRCTRIM1_U_Pos 0 //LRC U调控制位 #define SYS_LRCTRIM1_U_Msk (0x7FFF << SYS_LRCTRIM1_U_Pos) -#define SYS_HRCCR_DBL_Pos 0 //Double Frequency 0 20MHz 1 40MHz +#define SYS_HRCCR_DBL_Pos 0 //Double Frequency 0 20MHz 1 40MHz #define SYS_HRCCR_DBL_Msk (0x01 << SYS_HRCCR_DBL_Pos) #define SYS_HRCCR_OFF_Pos 1 //High speed RC Off #define SYS_HRCCR_OFF_Msk (0x01 << SYS_HRCCR_OFF_Pos) @@ -327,9 +327,9 @@ typedef struct #define SYS_PLLCR_OFF_Pos 2 #define SYS_PLLCR_OFF_Msk (0x01 << SYS_PLLCR_OFF_Pos) -#define SYS_PLLDIV_FBDIV_Pos 0 //PLL FeedBack分频寄存器 \ - //VCO输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV \ - //PLL输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV / OUTDIV = VCO输出频率 / OUTDIV +#define SYS_PLLDIV_FBDIV_Pos 0 /* PLL FeedBack分频寄存器 \ + VCO输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV \ + PLL输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV / OUTDIV = VCO输出频率 / OUTDIV */ #define SYS_PLLDIV_FBDIV_Msk (0x1FF << SYS_PLLDIV_FBDIV_Pos) #define SYS_PLLDIV_ADDIV_Pos 9 //ADC时钟基（即VCO输出分频后的时钟）经ADDIV分频后作为ADC的转换时钟 #define SYS_PLLDIV_ADDIV_Msk (0x1F << SYS_PLLDIV_ADDIV_Pos) @@ -364,8 +364,8 @@ typedef struct typedef struct { - __IO uint32_t PORTA_SEL; //给PORTA_SEL[2n+2:2n]赋相应的值，将PORTA.PINn引脚配置成GPIO、模拟、数字等功能 - //当赋值为PORTA_PINn_FUNMUX时，PORTA.PINn引脚可通过PORTA_MUX寄存器连接到各种数字外设 + __IO uint32_t PORTA_SEL; /*给PORTA_SEL[2n+2:2n]赋相应的值，将PORTA.PINn引脚配置成GPIO、模拟、数字等功能 + 当赋值为PORTA_PINn_FUNMUX时，PORTA.PINn引脚可通过PORTA_MUX寄存器连接到各种数字外设 */ __IO uint32_t PORTB_SEL; __IO uint32_t PORTC_SEL; @@ -1165,464 +1165,23 @@ typedef struct #define PIN23 23 #define PIN24 24 - __IO uint32_t DIR; //0 输入 1 输出 + __IO uint32_t DIR; //0 输入 1 输出 - __IO uint32_t INTLVLTRG; //Interrupt Level Trigger 1 电平触发中断 0 边沿触发中断 + __IO uint32_t INTLVLTRG; //Interrupt Level Trigger 1 电平触发中断 0 边沿触发中断 __IO uint32_t INTBE; //Both Edge，当INTLVLTRG设为边沿触发中断时，此位置1表示上升沿和下降沿都触发中断，置0时触发边沿由INTRISEEN选择 - __IO uint32_t INTRISEEN; //Interrupt Rise Edge Enable 1 上升沿/高电平触发中断 0 下降沿/低电平触发中断 + __IO uint32_t INTRISEEN; //Interrupt Rise Edge Enable 1 上升沿/高电平触发中断 0 下降沿/低电平触发中断 - __IO uint32_t INTEN; //1 中断使能 0 中断禁止 + __IO uint32_t INTEN; //1 中断使能 0 中断禁止 - __IO uint32_t INTRAWSTAT; //中断检测单元是否检测到了触发中断的条件 1 检测到了中断触发条件 0 没有检测到中断触发条件 + __IO uint32_t INTRAWSTAT; //中断检测单元是否检测到了触发中断的条件 1 检测到了中断触发条件 0 没有检测到中断触发条件 __IO uint32_t INTSTAT; //INTSTAT.PIN0 = INTRAWSTAT.PIN0 & INTEN.PIN0 __IO uint32_t INTCLR; //写1清除中断标志，只对边沿触发中断有用 } GPIO_TypeDef; -#define GPIO_DATA_PIN0_Pos 0 -#define GPIO_DATA_PIN0_Msk (0x01 << GPIO_DATA_PIN0_Pos) -#define GPIO_DATA_PIN1_Pos 1 -#define GPIO_DATA_PIN1_Msk (0x01 << GPIO_DATA_PIN1_Pos) -#define GPIO_DATA_PIN2_Pos 2 -#define GPIO_DATA_PIN2_Msk (0x01 << GPIO_DATA_PIN2_Pos) -#define GPIO_DATA_PIN3_Pos 3 -#define GPIO_DATA_PIN3_Msk (0x01 << GPIO_DATA_PIN3_Pos) -#define GPIO_DATA_PIN4_Pos 4 -#define GPIO_DATA_PIN4_Msk (0x01 << GPIO_DATA_PIN4_Pos) -#define GPIO_DATA_PIN5_Pos 5 -#define GPIO_DATA_PIN5_Msk (0x01 << GPIO_DATA_PIN5_Pos) -#define GPIO_DATA_PIN6_Pos 6 -#define GPIO_DATA_PIN6_Msk (0x01 << GPIO_DATA_PIN6_Pos) -#define GPIO_DATA_PIN7_Pos 7 -#define GPIO_DATA_PIN7_Msk (0x01 << GPIO_DATA_PIN7_Pos) -#define GPIO_DATA_PIN8_Pos 8 -#define GPIO_DATA_PIN8_Msk (0x01 << GPIO_DATA_PIN8_Pos) -#define GPIO_DATA_PIN9_Pos 9 -#define GPIO_DATA_PIN9_Msk (0x01 << GPIO_DATA_PIN9_Pos) -#define GPIO_DATA_PIN10_Pos 10 -#define GPIO_DATA_PIN10_Msk (0x01 << GPIO_DATA_PIN10_Pos) -#define GPIO_DATA_PIN11_Pos 11 -#define GPIO_DATA_PIN11_Msk (0x01 << GPIO_DATA_PIN11_Pos) -#define GPIO_DATA_PIN12_Pos 12 -#define GPIO_DATA_PIN12_Msk (0x01 << GPIO_DATA_PIN12_Pos) -#define GPIO_DATA_PIN13_Pos 13 -#define GPIO_DATA_PIN13_Msk (0x01 << GPIO_DATA_PIN13_Pos) -#define GPIO_DATA_PIN14_Pos 14 -#define GPIO_DATA_PIN14_Msk (0x01 << GPIO_DATA_PIN14_Pos) -#define GPIO_DATA_PIN15_Pos 15 -#define GPIO_DATA_PIN15_Msk (0x01 << GPIO_DATA_PIN15_Pos) -#define GPIO_DATA_PIN16_Pos 16 -#define GPIO_DATA_PIN16_Msk (0x01 << GPIO_DATA_PIN16_Pos) -#define GPIO_DATA_PIN17_Pos 17 -#define GPIO_DATA_PIN17_Msk (0x01 << GPIO_DATA_PIN17_Pos) -#define GPIO_DATA_PIN18_Pos 18 -#define GPIO_DATA_PIN18_Msk (0x01 << GPIO_DATA_PIN18_Pos) -#define GPIO_DATA_PIN19_Pos 19 -#define GPIO_DATA_PIN19_Msk (0x01 << GPIO_DATA_PIN19_Pos) -#define GPIO_DATA_PIN20_Pos 20 -#define GPIO_DATA_PIN20_Msk (0x01 << GPIO_DATA_PIN20_Pos) -#define GPIO_DATA_PIN21_Pos 21 -#define GPIO_DATA_PIN21_Msk (0x01 << GPIO_DATA_PIN21_Pos) -#define GPIO_DATA_PIN22_Pos 22 -#define GPIO_DATA_PIN22_Msk (0x01 << GPIO_DATA_PIN22_Pos) -#define GPIO_DATA_PIN23_Pos 23 -#define GPIO_DATA_PIN23_Msk (0x01 << GPIO_DATA_PIN23_Pos) - -#define GPIO_DIR_PIN0_Pos 0 -#define GPIO_DIR_PIN0_Msk (0x01 << GPIO_DIR_PIN0_Pos) -#define GPIO_DIR_PIN1_Pos 1 -#define GPIO_DIR_PIN1_Msk (0x01 << GPIO_DIR_PIN1_Pos) -#define GPIO_DIR_PIN2_Pos 2 -#define GPIO_DIR_PIN2_Msk (0x01 << GPIO_DIR_PIN2_Pos) -#define GPIO_DIR_PIN3_Pos 3 -#define GPIO_DIR_PIN3_Msk (0x01 << GPIO_DIR_PIN3_Pos) -#define GPIO_DIR_PIN4_Pos 4 -#define GPIO_DIR_PIN4_Msk (0x01 << GPIO_DIR_PIN4_Pos) -#define GPIO_DIR_PIN5_Pos 5 -#define GPIO_DIR_PIN5_Msk (0x01 << GPIO_DIR_PIN5_Pos) -#define GPIO_DIR_PIN6_Pos 6 -#define GPIO_DIR_PIN6_Msk (0x01 << GPIO_DIR_PIN6_Pos) -#define GPIO_DIR_PIN7_Pos 7 -#define GPIO_DIR_PIN7_Msk (0x01 << GPIO_DIR_PIN7_Pos) -#define GPIO_DIR_PIN8_Pos 8 -#define GPIO_DIR_PIN8_Msk (0x01 << GPIO_DIR_PIN8_Pos) -#define GPIO_DIR_PIN9_Pos 9 -#define GPIO_DIR_PIN9_Msk (0x01 << GPIO_DIR_PIN9_Pos) -#define GPIO_DIR_PIN10_Pos 10 -#define GPIO_DIR_PIN10_Msk (0x01 << GPIO_DIR_PIN10_Pos) -#define GPIO_DIR_PIN11_Pos 11 -#define GPIO_DIR_PIN11_Msk (0x01 << GPIO_DIR_PIN11_Pos) -#define GPIO_DIR_PIN12_Pos 12 -#define GPIO_DIR_PIN12_Msk (0x01 << GPIO_DIR_PIN12_Pos) -#define GPIO_DIR_PIN13_Pos 13 -#define GPIO_DIR_PIN13_Msk (0x01 << GPIO_DIR_PIN13_Pos) -#define GPIO_DIR_PIN14_Pos 14 -#define GPIO_DIR_PIN14_Msk (0x01 << GPIO_DIR_PIN14_Pos) -#define GPIO_DIR_PIN15_Pos 15 -#define GPIO_DIR_PIN15_Msk (0x01 << GPIO_DIR_PIN15_Pos) -#define GPIO_DIR_PIN16_Pos 16 -#define GPIO_DIR_PIN16_Msk (0x01 << GPIO_DIR_PIN16_Pos) -#define GPIO_DIR_PIN17_Pos 17 -#define GPIO_DIR_PIN17_Msk (0x01 << GPIO_DIR_PIN17_Pos) -#define GPIO_DIR_PIN18_Pos 18 -#define GPIO_DIR_PIN18_Msk (0x01 << GPIO_DIR_PIN18_Pos) -#define GPIO_DIR_PIN19_Pos 19 -#define GPIO_DIR_PIN19_Msk (0x01 << GPIO_DIR_PIN19_Pos) -#define GPIO_DIR_PIN20_Pos 20 -#define GPIO_DIR_PIN20_Msk (0x01 << GPIO_DIR_PIN20_Pos) -#define GPIO_DIR_PIN21_Pos 21 -#define GPIO_DIR_PIN21_Msk (0x01 << GPIO_DIR_PIN21_Pos) -#define GPIO_DIR_PIN22_Pos 22 -#define GPIO_DIR_PIN22_Msk (0x01 << GPIO_DIR_PIN22_Pos) -#define GPIO_DIR_PIN23_Pos 23 -#define GPIO_DIR_PIN23_Msk (0x01 << GPIO_DIR_PIN23_Pos) - -#define GPIO_INTLVLTRG_PIN0_Pos 0 -#define GPIO_INTLVLTRG_PIN0_Msk (0x01 << GPIO_INTLVLTRG_PIN0_Pos) -#define GPIO_INTLVLTRG_PIN1_Pos 1 -#define GPIO_INTLVLTRG_PIN1_Msk (0x01 << GPIO_INTLVLTRG_PIN1_Pos) -#define GPIO_INTLVLTRG_PIN2_Pos 2 -#define GPIO_INTLVLTRG_PIN2_Msk (0x01 << GPIO_INTLVLTRG_PIN2_Pos) -#define GPIO_INTLVLTRG_PIN3_Pos 3 -#define GPIO_INTLVLTRG_PIN3_Msk (0x01 << GPIO_INTLVLTRG_PIN3_Pos) -#define GPIO_INTLVLTRG_PIN4_Pos 4 -#define GPIO_INTLVLTRG_PIN4_Msk (0x01 << GPIO_INTLVLTRG_PIN4_Pos) -#define GPIO_INTLVLTRG_PIN5_Pos 5 -#define GPIO_INTLVLTRG_PIN5_Msk (0x01 << GPIO_INTLVLTRG_PIN5_Pos) -#define GPIO_INTLVLTRG_PIN6_Pos 6 -#define GPIO_INTLVLTRG_PIN6_Msk (0x01 << GPIO_INTLVLTRG_PIN6_Pos) -#define GPIO_INTLVLTRG_PIN7_Pos 7 -#define GPIO_INTLVLTRG_PIN7_Msk (0x01 << GPIO_INTLVLTRG_PIN7_Pos) -#define GPIO_INTLVLTRG_PIN8_Pos 8 -#define GPIO_INTLVLTRG_PIN8_Msk (0x01 << GPIO_INTLVLTRG_PIN8_Pos) -#define GPIO_INTLVLTRG_PIN9_Pos 9 -#define GPIO_INTLVLTRG_PIN9_Msk (0x01 << GPIO_INTLVLTRG_PIN9_Pos) -#define GPIO_INTLVLTRG_PIN10_Pos 10 -#define GPIO_INTLVLTRG_PIN10_Msk (0x01 << GPIO_INTLVLTRG_PIN10_Pos) -#define GPIO_INTLVLTRG_PIN11_Pos 11 -#define GPIO_INTLVLTRG_PIN11_Msk (0x01 << GPIO_INTLVLTRG_PIN11_Pos) -#define GPIO_INTLVLTRG_PIN12_Pos 12 -#define GPIO_INTLVLTRG_PIN12_Msk (0x01 << GPIO_INTLVLTRG_PIN12_Pos) -#define GPIO_INTLVLTRG_PIN13_Pos 13 -#define GPIO_INTLVLTRG_PIN13_Msk (0x01 << GPIO_INTLVLTRG_PIN13_Pos) -#define GPIO_INTLVLTRG_PIN14_Pos 14 -#define GPIO_INTLVLTRG_PIN14_Msk (0x01 << GPIO_INTLVLTRG_PIN14_Pos) -#define GPIO_INTLVLTRG_PIN15_Pos 15 -#define GPIO_INTLVLTRG_PIN15_Msk (0x01 << GPIO_INTLVLTRG_PIN15_Pos) -#define GPIO_INTLVLTRG_PIN16_Pos 16 -#define GPIO_INTLVLTRG_PIN16_Msk (0x01 << GPIO_INTLVLTRG_PIN16_Pos) -#define GPIO_INTLVLTRG_PIN17_Pos 17 -#define GPIO_INTLVLTRG_PIN17_Msk (0x01 << GPIO_INTLVLTRG_PIN17_Pos) -#define GPIO_INTLVLTRG_PIN18_Pos 18 -#define GPIO_INTLVLTRG_PIN18_Msk (0x01 << GPIO_INTLVLTRG_PIN18_Pos) -#define GPIO_INTLVLTRG_PIN19_Pos 19 -#define GPIO_INTLVLTRG_PIN19_Msk (0x01 << GPIO_INTLVLTRG_PIN19_Pos) -#define GPIO_INTLVLTRG_PIN20_Pos 20 -#define GPIO_INTLVLTRG_PIN20_Msk (0x01 << GPIO_INTLVLTRG_PIN20_Pos) -#define GPIO_INTLVLTRG_PIN21_Pos 21 -#define GPIO_INTLVLTRG_PIN21_Msk (0x01 << GPIO_INTLVLTRG_PIN21_Pos) -#define GPIO_INTLVLTRG_PIN22_Pos 22 -#define GPIO_INTLVLTRG_PIN22_Msk (0x01 << GPIO_INTLVLTRG_PIN22_Pos) -#define GPIO_INTLVLTRG_PIN23_Pos 23 -#define GPIO_INTLVLTRG_PIN23_Msk (0x01 << GPIO_INTLVLTRG_PIN23_Pos) - -#define GPIO_INTBE_PIN0_Pos 0 -#define GPIO_INTBE_PIN0_Msk (0x01 << GPIO_INTBE_PIN0_Pos) -#define GPIO_INTBE_PIN1_Pos 1 -#define GPIO_INTBE_PIN1_Msk (0x01 << GPIO_INTBE_PIN1_Pos) -#define GPIO_INTBE_PIN2_Pos 2 -#define GPIO_INTBE_PIN2_Msk (0x01 << GPIO_INTBE_PIN2_Pos) -#define GPIO_INTBE_PIN3_Pos 3 -#define GPIO_INTBE_PIN3_Msk (0x01 << GPIO_INTBE_PIN3_Pos) -#define GPIO_INTBE_PIN4_Pos 4 -#define GPIO_INTBE_PIN4_Msk (0x01 << GPIO_INTBE_PIN4_Pos) -#define GPIO_INTBE_PIN5_Pos 5 -#define GPIO_INTBE_PIN5_Msk (0x01 << GPIO_INTBE_PIN5_Pos) -#define GPIO_INTBE_PIN6_Pos 6 -#define GPIO_INTBE_PIN6_Msk (0x01 << GPIO_INTBE_PIN6_Pos) -#define GPIO_INTBE_PIN7_Pos 7 -#define GPIO_INTBE_PIN7_Msk (0x01 << GPIO_INTBE_PIN7_Pos) -#define GPIO_INTBE_PIN8_Pos 8 -#define GPIO_INTBE_PIN8_Msk (0x01 << GPIO_INTBE_PIN8_Pos) -#define GPIO_INTBE_PIN9_Pos 9 -#define GPIO_INTBE_PIN9_Msk (0x01 << GPIO_INTBE_PIN9_Pos) -#define GPIO_INTBE_PIN10_Pos 10 -#define GPIO_INTBE_PIN10_Msk (0x01 << GPIO_INTBE_PIN10_Pos) -#define GPIO_INTBE_PIN11_Pos 11 -#define GPIO_INTBE_PIN11_Msk (0x01 << GPIO_INTBE_PIN11_Pos) -#define GPIO_INTBE_PIN12_Pos 12 -#define GPIO_INTBE_PIN12_Msk (0x01 << GPIO_INTBE_PIN12_Pos) -#define GPIO_INTBE_PIN13_Pos 13 -#define GPIO_INTBE_PIN13_Msk (0x01 << GPIO_INTBE_PIN13_Pos) -#define GPIO_INTBE_PIN14_Pos 14 -#define GPIO_INTBE_PIN14_Msk (0x01 << GPIO_INTBE_PIN14_Pos) -#define GPIO_INTBE_PIN15_Pos 15 -#define GPIO_INTBE_PIN15_Msk (0x01 << GPIO_INTBE_PIN15_Pos) -#define GPIO_INTBE_PIN16_Pos 16 -#define GPIO_INTBE_PIN16_Msk (0x01 << GPIO_INTBE_PIN16_Pos) -#define GPIO_INTBE_PIN17_Pos 17 -#define GPIO_INTBE_PIN17_Msk (0x01 << GPIO_INTBE_PIN17_Pos) -#define GPIO_INTBE_PIN18_Pos 18 -#define GPIO_INTBE_PIN18_Msk (0x01 << GPIO_INTBE_PIN18_Pos) -#define GPIO_INTBE_PIN19_Pos 19 -#define GPIO_INTBE_PIN19_Msk (0x01 << GPIO_INTBE_PIN19_Pos) -#define GPIO_INTBE_PIN20_Pos 20 -#define GPIO_INTBE_PIN20_Msk (0x01 << GPIO_INTBE_PIN20_Pos) -#define GPIO_INTBE_PIN21_Pos 21 -#define GPIO_INTBE_PIN21_Msk (0x01 << GPIO_INTBE_PIN21_Pos) -#define GPIO_INTBE_PIN22_Pos 22 -#define GPIO_INTBE_PIN22_Msk (0x01 << GPIO_INTBE_PIN22_Pos) -#define GPIO_INTBE_PIN23_Pos 23 -#define GPIO_INTBE_PIN23_Msk (0x01 << GPIO_INTBE_PIN23_Pos) - -#define GPIO_INTRISEEN_PIN0_Pos 0 -#define GPIO_INTRISEEN_PIN0_Msk (0x01 << GPIO_INTRISEEN_PIN0_Pos) -#define GPIO_INTRISEEN_PIN1_Pos 1 -#define GPIO_INTRISEEN_PIN1_Msk (0x01 << GPIO_INTRISEEN_PIN1_Pos) -#define GPIO_INTRISEEN_PIN2_Pos 2 -#define GPIO_INTRISEEN_PIN2_Msk (0x01 << GPIO_INTRISEEN_PIN2_Pos) -#define GPIO_INTRISEEN_PIN3_Pos 3 -#define GPIO_INTRISEEN_PIN3_Msk (0x01 << GPIO_INTRISEEN_PIN3_Pos) -#define GPIO_INTRISEEN_PIN4_Pos 4 -#define GPIO_INTRISEEN_PIN4_Msk (0x01 << GPIO_INTRISEEN_PIN4_Pos) -#define GPIO_INTRISEEN_PIN5_Pos 5 -#define GPIO_INTRISEEN_PIN5_Msk (0x01 << GPIO_INTRISEEN_PIN5_Pos) -#define GPIO_INTRISEEN_PIN6_Pos 6 -#define GPIO_INTRISEEN_PIN6_Msk (0x01 << GPIO_INTRISEEN_PIN6_Pos) -#define GPIO_INTRISEEN_PIN7_Pos 7 -#define GPIO_INTRISEEN_PIN7_Msk (0x01 << GPIO_INTRISEEN_PIN7_Pos) -#define GPIO_INTRISEEN_PIN8_Pos 8 -#define GPIO_INTRISEEN_PIN8_Msk (0x01 << GPIO_INTRISEEN_PIN8_Pos) -#define GPIO_INTRISEEN_PIN9_Pos 9 -#define GPIO_INTRISEEN_PIN9_Msk (0x01 << GPIO_INTRISEEN_PIN9_Pos) -#define GPIO_INTRISEEN_PIN10_Pos 10 -#define GPIO_INTRISEEN_PIN10_Msk (0x01 << GPIO_INTRISEEN_PIN10_Pos) -#define GPIO_INTRISEEN_PIN11_Pos 11 -#define GPIO_INTRISEEN_PIN11_Msk (0x01 << GPIO_INTRISEEN_PIN11_Pos) -#define GPIO_INTRISEEN_PIN12_Pos 12 -#define GPIO_INTRISEEN_PIN12_Msk (0x01 << GPIO_INTRISEEN_PIN12_Pos) -#define GPIO_INTRISEEN_PIN13_Pos 13 -#define GPIO_INTRISEEN_PIN13_Msk (0x01 << GPIO_INTRISEEN_PIN13_Pos) -#define GPIO_INTRISEEN_PIN14_Pos 14 -#define GPIO_INTRISEEN_PIN14_Msk (0x01 << GPIO_INTRISEEN_PIN14_Pos) -#define GPIO_INTRISEEN_PIN15_Pos 15 -#define GPIO_INTRISEEN_PIN15_Msk (0x01 << GPIO_INTRISEEN_PIN15_Pos) -#define GPIO_INTRISEEN_PIN16_Pos 16 -#define GPIO_INTRISEEN_PIN16_Msk (0x01 << GPIO_INTRISEEN_PIN16_Pos) -#define GPIO_INTRISEEN_PIN17_Pos 17 -#define GPIO_INTRISEEN_PIN17_Msk (0x01 << GPIO_INTRISEEN_PIN17_Pos) -#define GPIO_INTRISEEN_PIN18_Pos 18 -#define GPIO_INTRISEEN_PIN18_Msk (0x01 << GPIO_INTRISEEN_PIN18_Pos) -#define GPIO_INTRISEEN_PIN19_Pos 19 -#define GPIO_INTRISEEN_PIN19_Msk (0x01 << GPIO_INTRISEEN_PIN19_Pos) -#define GPIO_INTRISEEN_PIN20_Pos 20 -#define GPIO_INTRISEEN_PIN20_Msk (0x01 << GPIO_INTRISEEN_PIN20_Pos) -#define GPIO_INTRISEEN_PIN21_Pos 21 -#define GPIO_INTRISEEN_PIN21_Msk (0x01 << GPIO_INTRISEEN_PIN21_Pos) -#define GPIO_INTRISEEN_PIN22_Pos 22 -#define GPIO_INTRISEEN_PIN22_Msk (0x01 << GPIO_INTRISEEN_PIN22_Pos) -#define GPIO_INTRISEEN_PIN23_Pos 23 -#define GPIO_INTRISEEN_PIN23_Msk (0x01 << GPIO_INTRISEEN_PIN23_Pos) - -#define GPIO_INTEN_PIN0_Pos 0 -#define GPIO_INTEN_PIN0_Msk (0x01 << GPIO_INTEN_PIN0_Pos) -#define GPIO_INTEN_PIN1_Pos 1 -#define GPIO_INTEN_PIN1_Msk (0x01 << GPIO_INTEN_PIN1_Pos) -#define GPIO_INTEN_PIN2_Pos 2 -#define GPIO_INTEN_PIN2_Msk (0x01 << GPIO_INTEN_PIN2_Pos) -#define GPIO_INTEN_PIN3_Pos 3 -#define GPIO_INTEN_PIN3_Msk (0x01 << GPIO_INTEN_PIN3_Pos) -#define GPIO_INTEN_PIN4_Pos 4 -#define GPIO_INTEN_PIN4_Msk (0x01 << GPIO_INTEN_PIN4_Pos) -#define GPIO_INTEN_PIN5_Pos 5 -#define GPIO_INTEN_PIN5_Msk (0x01 << GPIO_INTEN_PIN5_Pos) -#define GPIO_INTEN_PIN6_Pos 6 -#define GPIO_INTEN_PIN6_Msk (0x01 << GPIO_INTEN_PIN6_Pos) -#define GPIO_INTEN_PIN7_Pos 7 -#define GPIO_INTEN_PIN7_Msk (0x01 << GPIO_INTEN_PIN7_Pos) -#define GPIO_INTEN_PIN8_Pos 8 -#define GPIO_INTEN_PIN8_Msk (0x01 << GPIO_INTEN_PIN8_Pos) -#define GPIO_INTEN_PIN9_Pos 9 -#define GPIO_INTEN_PIN9_Msk (0x01 << GPIO_INTEN_PIN9_Pos) -#define GPIO_INTEN_PIN10_Pos 10 -#define GPIO_INTEN_PIN10_Msk (0x01 << GPIO_INTEN_PIN10_Pos) -#define GPIO_INTEN_PIN11_Pos 11 -#define GPIO_INTEN_PIN11_Msk (0x01 << GPIO_INTEN_PIN11_Pos) -#define GPIO_INTEN_PIN12_Pos 12 -#define GPIO_INTEN_PIN12_Msk (0x01 << GPIO_INTEN_PIN12_Pos) -#define GPIO_INTEN_PIN13_Pos 13 -#define GPIO_INTEN_PIN13_Msk (0x01 << GPIO_INTEN_PIN13_Pos) -#define GPIO_INTEN_PIN14_Pos 14 -#define GPIO_INTEN_PIN14_Msk (0x01 << GPIO_INTEN_PIN14_Pos) -#define GPIO_INTEN_PIN15_Pos 15 -#define GPIO_INTEN_PIN15_Msk (0x01 << GPIO_INTEN_PIN15_Pos) -#define GPIO_INTEN_PIN16_Pos 16 -#define GPIO_INTEN_PIN16_Msk (0x01 << GPIO_INTEN_PIN16_Pos) -#define GPIO_INTEN_PIN17_Pos 17 -#define GPIO_INTEN_PIN17_Msk (0x01 << GPIO_INTEN_PIN17_Pos) -#define GPIO_INTEN_PIN18_Pos 18 -#define GPIO_INTEN_PIN18_Msk (0x01 << GPIO_INTEN_PIN18_Pos) -#define GPIO_INTEN_PIN19_Pos 19 -#define GPIO_INTEN_PIN19_Msk (0x01 << GPIO_INTEN_PIN19_Pos) -#define GPIO_INTEN_PIN20_Pos 20 -#define GPIO_INTEN_PIN20_Msk (0x01 << GPIO_INTEN_PIN20_Pos) -#define GPIO_INTEN_PIN21_Pos 21 -#define GPIO_INTEN_PIN21_Msk (0x01 << GPIO_INTEN_PIN21_Pos) -#define GPIO_INTEN_PIN22_Pos 22 -#define GPIO_INTEN_PIN22_Msk (0x01 << GPIO_INTEN_PIN22_Pos) -#define GPIO_INTEN_PIN23_Pos 23 -#define GPIO_INTEN_PIN23_Msk (0x01 << GPIO_INTEN_PIN23_Pos) - -#define GPIO_INTRAWSTAT_PIN0_Pos 0 -#define GPIO_INTRAWSTAT_PIN0_Msk (0x01 << GPIO_INTRAWSTAT_PIN0_Pos) -#define GPIO_INTRAWSTAT_PIN1_Pos 1 -#define GPIO_INTRAWSTAT_PIN1_Msk (0x01 << GPIO_INTRAWSTAT_PIN1_Pos) -#define GPIO_INTRAWSTAT_PIN2_Pos 2 -#define GPIO_INTRAWSTAT_PIN2_Msk (0x01 << GPIO_INTRAWSTAT_PIN2_Pos) -#define GPIO_INTRAWSTAT_PIN3_Pos 3 -#define GPIO_INTRAWSTAT_PIN3_Msk (0x01 << GPIO_INTRAWSTAT_PIN3_Pos) -#define GPIO_INTRAWSTAT_PIN4_Pos 4 -#define GPIO_INTRAWSTAT_PIN4_Msk (0x01 << GPIO_INTRAWSTAT_PIN4_Pos) -#define GPIO_INTRAWSTAT_PIN5_Pos 5 -#define GPIO_INTRAWSTAT_PIN5_Msk (0x01 << GPIO_INTRAWSTAT_PIN5_Pos) -#define GPIO_INTRAWSTAT_PIN6_Pos 6 -#define GPIO_INTRAWSTAT_PIN6_Msk (0x01 << GPIO_INTRAWSTAT_PIN6_Pos) -#define GPIO_INTRAWSTAT_PIN7_Pos 7 -#define GPIO_INTRAWSTAT_PIN7_Msk (0x01 << GPIO_INTRAWSTAT_PIN7_Pos) -#define GPIO_INTRAWSTAT_PIN8_Pos 8 -#define GPIO_INTRAWSTAT_PIN8_Msk (0x01 << GPIO_INTRAWSTAT_PIN8_Pos) -#define GPIO_INTRAWSTAT_PIN9_Pos 9 -#define GPIO_INTRAWSTAT_PIN9_Msk (0x01 << GPIO_INTRAWSTAT_PIN9_Pos) -#define GPIO_INTRAWSTAT_PIN10_Pos 10 -#define GPIO_INTRAWSTAT_PIN10_Msk (0x01 << GPIO_INTRAWSTAT_PIN10_Pos) -#define GPIO_INTRAWSTAT_PIN11_Pos 11 -#define GPIO_INTRAWSTAT_PIN11_Msk (0x01 << GPIO_INTRAWSTAT_PIN11_Pos) -#define GPIO_INTRAWSTAT_PIN12_Pos 12 -#define GPIO_INTRAWSTAT_PIN12_Msk (0x01 << GPIO_INTRAWSTAT_PIN12_Pos) -#define GPIO_INTRAWSTAT_PIN13_Pos 13 -#define GPIO_INTRAWSTAT_PIN13_Msk (0x01 << GPIO_INTRAWSTAT_PIN13_Pos) -#define GPIO_INTRAWSTAT_PIN14_Pos 14 -#define GPIO_INTRAWSTAT_PIN14_Msk (0x01 << GPIO_INTRAWSTAT_PIN14_Pos) -#define GPIO_INTRAWSTAT_PIN15_Pos 15 -#define GPIO_INTRAWSTAT_PIN15_Msk (0x01 << GPIO_INTRAWSTAT_PIN15_Pos) -#define GPIO_INTRAWSTAT_PIN16_Pos 16 -#define GPIO_INTRAWSTAT_PIN16_Msk (0x01 << GPIO_INTRAWSTAT_PIN16_Pos) -#define GPIO_INTRAWSTAT_PIN17_Pos 17 -#define GPIO_INTRAWSTAT_PIN17_Msk (0x01 << GPIO_INTRAWSTAT_PIN17_Pos) -#define GPIO_INTRAWSTAT_PIN18_Pos 18 -#define GPIO_INTRAWSTAT_PIN18_Msk (0x01 << GPIO_INTRAWSTAT_PIN18_Pos) -#define GPIO_INTRAWSTAT_PIN19_Pos 19 -#define GPIO_INTRAWSTAT_PIN19_Msk (0x01 << GPIO_INTRAWSTAT_PIN19_Pos) -#define GPIO_INTRAWSTAT_PIN20_Pos 20 -#define GPIO_INTRAWSTAT_PIN20_Msk (0x01 << GPIO_INTRAWSTAT_PIN20_Pos) -#define GPIO_INTRAWSTAT_PIN21_Pos 21 -#define GPIO_INTRAWSTAT_PIN21_Msk (0x01 << GPIO_INTRAWSTAT_PIN21_Pos) -#define GPIO_INTRAWSTAT_PIN22_Pos 22 -#define GPIO_INTRAWSTAT_PIN22_Msk (0x01 << GPIO_INTRAWSTAT_PIN22_Pos) -#define GPIO_INTRAWSTAT_PIN23_Pos 23 -#define GPIO_INTRAWSTAT_PIN23_Msk (0x01 << GPIO_INTRAWSTAT_PIN23_Pos) - -#define GPIO_INTSTAT_PIN0_Pos 0 -#define GPIO_INTSTAT_PIN0_Msk (0x01 << GPIO_INTSTAT_PIN0_Pos) -#define GPIO_INTSTAT_PIN1_Pos 1 -#define GPIO_INTSTAT_PIN1_Msk (0x01 << GPIO_INTSTAT_PIN1_Pos) -#define GPIO_INTSTAT_PIN2_Pos 2 -#define GPIO_INTSTAT_PIN2_Msk (0x01 << GPIO_INTSTAT_PIN2_Pos) -#define GPIO_INTSTAT_PIN3_Pos 3 -#define GPIO_INTSTAT_PIN3_Msk (0x01 << GPIO_INTSTAT_PIN3_Pos) -#define GPIO_INTSTAT_PIN4_Pos 4 -#define GPIO_INTSTAT_PIN4_Msk (0x01 << GPIO_INTSTAT_PIN4_Pos) -#define GPIO_INTSTAT_PIN5_Pos 5 -#define GPIO_INTSTAT_PIN5_Msk (0x01 << GPIO_INTSTAT_PIN5_Pos) -#define GPIO_INTSTAT_PIN6_Pos 6 -#define GPIO_INTSTAT_PIN6_Msk (0x01 << GPIO_INTSTAT_PIN6_Pos) -#define GPIO_INTSTAT_PIN7_Pos 7 -#define GPIO_INTSTAT_PIN7_Msk (0x01 << GPIO_INTSTAT_PIN7_Pos) -#define GPIO_INTSTAT_PIN8_Pos 8 -#define GPIO_INTSTAT_PIN8_Msk (0x01 << GPIO_INTSTAT_PIN8_Pos) -#define GPIO_INTSTAT_PIN9_Pos 9 -#define GPIO_INTSTAT_PIN9_Msk (0x01 << GPIO_INTSTAT_PIN9_Pos) -#define GPIO_INTSTAT_PIN10_Pos 10 -#define GPIO_INTSTAT_PIN10_Msk (0x01 << GPIO_INTSTAT_PIN10_Pos) -#define GPIO_INTSTAT_PIN11_Pos 11 -#define GPIO_INTSTAT_PIN11_Msk (0x01 << GPIO_INTSTAT_PIN11_Pos) -#define GPIO_INTSTAT_PIN12_Pos 12 -#define GPIO_INTSTAT_PIN12_Msk (0x01 << GPIO_INTSTAT_PIN12_Pos) -#define GPIO_INTSTAT_PIN13_Pos 13 -#define GPIO_INTSTAT_PIN13_Msk (0x01 << GPIO_INTSTAT_PIN13_Pos) -#define GPIO_INTSTAT_PIN14_Pos 14 -#define GPIO_INTSTAT_PIN14_Msk (0x01 << GPIO_INTSTAT_PIN14_Pos) -#define GPIO_INTSTAT_PIN15_Pos 15 -#define GPIO_INTSTAT_PIN15_Msk (0x01 << GPIO_INTSTAT_PIN15_Pos) -#define GPIO_INTSTAT_PIN16_Pos 16 -#define GPIO_INTSTAT_PIN16_Msk (0x01 << GPIO_INTSTAT_PIN16_Pos) -#define GPIO_INTSTAT_PIN17_Pos 17 -#define GPIO_INTSTAT_PIN17_Msk (0x01 << GPIO_INTSTAT_PIN17_Pos) -#define GPIO_INTSTAT_PIN18_Pos 18 -#define GPIO_INTSTAT_PIN18_Msk (0x01 << GPIO_INTSTAT_PIN18_Pos) -#define GPIO_INTSTAT_PIN19_Pos 19 -#define GPIO_INTSTAT_PIN19_Msk (0x01 << GPIO_INTSTAT_PIN19_Pos) -#define GPIO_INTSTAT_PIN20_Pos 20 -#define GPIO_INTSTAT_PIN20_Msk (0x01 << GPIO_INTSTAT_PIN20_Pos) -#define GPIO_INTSTAT_PIN21_Pos 21 -#define GPIO_INTSTAT_PIN21_Msk (0x01 << GPIO_INTSTAT_PIN21_Pos) -#define GPIO_INTSTAT_PIN22_Pos 22 -#define GPIO_INTSTAT_PIN22_Msk (0x01 << GPIO_INTSTAT_PIN22_Pos) -#define GPIO_INTSTAT_PIN23_Pos 23 -#define GPIO_INTSTAT_PIN23_Msk (0x01 << GPIO_INTSTAT_PIN23_Pos) - -#define GPIO_INTCLR_PIN0_Pos 0 -#define GPIO_INTCLR_PIN0_Msk (0x01 << GPIO_INTCLR_PIN0_Pos) -#define GPIO_INTCLR_PIN1_Pos 1 -#define GPIO_INTCLR_PIN1_Msk (0x01 << GPIO_INTCLR_PIN1_Pos) -#define GPIO_INTCLR_PIN2_Pos 2 -#define GPIO_INTCLR_PIN2_Msk (0x01 << GPIO_INTCLR_PIN2_Pos) -#define GPIO_INTCLR_PIN3_Pos 3 -#define GPIO_INTCLR_PIN3_Msk (0x01 << GPIO_INTCLR_PIN3_Pos) -#define GPIO_INTCLR_PIN4_Pos 4 -#define GPIO_INTCLR_PIN4_Msk (0x01 << GPIO_INTCLR_PIN4_Pos) -#define GPIO_INTCLR_PIN5_Pos 5 -#define GPIO_INTCLR_PIN5_Msk (0x01 << GPIO_INTCLR_PIN5_Pos) -#define GPIO_INTCLR_PIN6_Pos 6 -#define GPIO_INTCLR_PIN6_Msk (0x01 << GPIO_INTCLR_PIN6_Pos) -#define GPIO_INTCLR_PIN7_Pos 7 -#define GPIO_INTCLR_PIN7_Msk (0x01 << GPIO_INTCLR_PIN7_Pos) -#define GPIO_INTCLR_PIN8_Pos 8 -#define GPIO_INTCLR_PIN8_Msk (0x01 << GPIO_INTCLR_PIN8_Pos) -#define GPIO_INTCLR_PIN9_Pos 9 -#define GPIO_INTCLR_PIN9_Msk (0x01 << GPIO_INTCLR_PIN9_Pos) -#define GPIO_INTCLR_PIN10_Pos 10 -#define GPIO_INTCLR_PIN10_Msk (0x01 << GPIO_INTCLR_PIN10_Pos) -#define GPIO_INTCLR_PIN11_Pos 11 -#define GPIO_INTCLR_PIN11_Msk (0x01 << GPIO_INTCLR_PIN11_Pos) -#define GPIO_INTCLR_PIN12_Pos 12 -#define GPIO_INTCLR_PIN12_Msk (0x01 << GPIO_INTCLR_PIN12_Pos) -#define GPIO_INTCLR_PIN13_Pos 13 -#define GPIO_INTCLR_PIN13_Msk (0x01 << GPIO_INTCLR_PIN13_Pos) -#define GPIO_INTCLR_PIN14_Pos 14 -#define GPIO_INTCLR_PIN14_Msk (0x01 << GPIO_INTCLR_PIN14_Pos) -#define GPIO_INTCLR_PIN15_Pos 15 -#define GPIO_INTCLR_PIN15_Msk (0x01 << GPIO_INTCLR_PIN15_Pos) -#define GPIO_INTCLR_PIN16_Pos 16 -#define GPIO_INTCLR_PIN16_Msk (0x01 << GPIO_INTCLR_PIN16_Pos) -#define GPIO_INTCLR_PIN17_Pos 17 -#define GPIO_INTCLR_PIN17_Msk (0x01 << GPIO_INTCLR_PIN17_Pos) -#define GPIO_INTCLR_PIN18_Pos 18 -#define GPIO_INTCLR_PIN18_Msk (0x01 << GPIO_INTCLR_PIN18_Pos) -#define GPIO_INTCLR_PIN19_Pos 19 -#define GPIO_INTCLR_PIN19_Msk (0x01 << GPIO_INTCLR_PIN19_Pos) -#define GPIO_INTCLR_PIN20_Pos 20 -#define GPIO_INTCLR_PIN20_Msk (0x01 << GPIO_INTCLR_PIN20_Pos) -#define GPIO_INTCLR_PIN21_Pos 21 -#define GPIO_INTCLR_PIN21_Msk (0x01 << GPIO_INTCLR_PIN21_Pos) -#define GPIO_INTCLR_PIN22_Pos 22 -#define GPIO_INTCLR_PIN22_Msk (0x01 << GPIO_INTCLR_PIN22_Pos) -#define GPIO_INTCLR_PIN23_Pos 23 -#define GPIO_INTCLR_PIN23_Msk (0x01 << GPIO_INTCLR_PIN23_Pos) - typedef struct { __IO uint32_t LDVAL; //定时器加载值，使能后定时器从此数值开始向下递减计数 @@ -1634,7 +1193,7 @@ typedef struct #define TIMR_CTRL_EN_Pos 0 //此位赋1导致TIMR从LDVAL开始向下递减计数 #define TIMR_CTRL_EN_Msk (0x01 << TIMR_CTRL_EN_Pos) -#define TIMR_CTRL_CLKSRC_Pos 1 //时钟源：0 内部系统时钟 1 外部引脚脉冲计数 +#define TIMR_CTRL_CLKSRC_Pos 1 //时钟源：0 内部系统时钟 1 外部引脚脉冲计数 #define TIMR_CTRL_CLKSRC_Msk (0x01 << TIMR_CTRL_CLKSRC_Pos) #define TIMR_CTRL_CASCADE_Pos 2 //1 TIMRx的计数时钟为TIMRx-1的溢出信号 #define TIMR_CTRL_CASCADE_Msk (0x01 << TIMR_CTRL_CASCADE_Pos) @@ -1656,9 +1215,9 @@ typedef struct #define TIMRG_PCTRL_EN_Pos 0 //开始测量脉宽，脉宽内32位计数器从0开始向上计数 #define TIMRG_PCTRL_EN_Msk (0x01 << TIMRG_PCTRL_EN_Pos) -#define TIMRG_PCTRL_HIGH_Pos 1 //0 测量低电平长度 1 测量高电平长度 +#define TIMRG_PCTRL_HIGH_Pos 1 //0 测量低电平长度 1 测量高电平长度 #define TIMRG_PCTRL_HIGH_Msk (0x01 << TIMRG_PCTRL_HIGH_Pos) -#define TIMRG_PCTRL_CLKSRC_Pos 2 //时钟源：0 内部系统时钟 1 脉宽测量模块变成一个计数器，不再具有脉宽测量功能 +#define TIMRG_PCTRL_CLKSRC_Pos 2 //时钟源：0 内部系统时钟 1 脉宽测量模块变成一个计数器，不再具有脉宽测量功能 #define TIMRG_PCTRL_CLKSRC_Msk (0x01 << TIMRG_PCTRL_CLKSRC_Pos) #define TIMRG_IE_TIMR0_Pos 0 @@ -1731,7 +1290,7 @@ typedef struct #define UART_DATA_PAERR_Pos 10 //Parity Error #define UART_DATA_PAERR_Msk (0x01 << UART_DATA_PAERR_Pos) -#define UART_CTRL_TXIDLE_Pos 0 //TX IDLE: 0 正在发送数据 1 空闲状态，没有数据发送 +#define UART_CTRL_TXIDLE_Pos 0 //TX IDLE: 0 正在发送数据 1 空闲状态，没有数据发送 #define UART_CTRL_TXIDLE_Msk (0x01 << UART_CTRL_TXIDLE_Pos) #define UART_CTRL_TXFF_Pos 1 //TX FIFO Full #define UART_CTRL_TXFF_Msk (0x01 << UART_CTRL_TXFF_Pos) @@ -1790,10 +1349,10 @@ typedef struct #define UART_BAUD_RXIF_Msk (0x01 << UART_BAUD_RXIF_Pos) #define UART_BAUD_ABREN_Pos 23 //Auto Baudrate Enable，写1启动自动波特率校准，完成后自动清零 #define UART_BAUD_ABREN_Msk (0x01 << UART_BAUD_ABREN_Pos) -#define UART_BAUD_ABRBIT_Pos 24 //Auto Baudrate Bit，用于计算波特率的检测位长，0 1位，通过测起始位 脉宽计算波特率，要求发送端发送0xFF \ +#define UART_BAUD_ABRBIT_Pos 24 /*Auto Baudrate Bit，用于计算波特率的检测位长，0 1位，通过测起始位 脉宽计算波特率，要求发送端发送0xFF \ // 1 2位，通过测起始位加1位数据位脉宽计算波特率，要求发送端发送0xFE \ // 1 4位，通过测起始位加3位数据位脉宽计算波特率，要求发送端发送0xF8 \ - // 1 8位，通过测起始位加7位数据位脉宽计算波特率，要求发送端发送0x80 + // 1 8位，通过测起始位加7位数据位脉宽计算波特率，要求发送端发送0x80 */ #define UART_BAUD_ABRBIT_Msk (0x03 << UART_BAUD_ABRBIT_Pos) #define UART_BAUD_ABRERR_Pos 26 //Auto Baudrate Error，0 自动波特率校准成功 1 自动波特率校准失败 #define UART_BAUD_ABRERR_Msk (0x01 << UART_BAUD_ABRERR_Pos) @@ -1855,19 +1414,19 @@ typedef struct #define SPI_CTRL_EN_Msk (0x01 << SPI_CTRL_EN_Pos) #define SPI_CTRL_SIZE_Pos 4 //Data Size Select, 取值3--15，表示4--16位 #define SPI_CTRL_SIZE_Msk (0x0F << SPI_CTRL_SIZE_Pos) -#define SPI_CTRL_CPHA_Pos 8 //0 在SCLK的第一个跳变沿采样数据 1 在SCLK的第二个跳变沿采样数据 +#define SPI_CTRL_CPHA_Pos 8 //0 在SCLK的第一个跳变沿采样数据 1 在SCLK的第二个跳变沿采样数据 #define SPI_CTRL_CPHA_Msk (0x01 << SPI_CTRL_CPHA_Pos) -#define SPI_CTRL_CPOL_Pos 9 //0 空闲状态下SCLK为低电平 1 空闲状态下SCLK为高电平 +#define SPI_CTRL_CPOL_Pos 9 //0 空闲状态下SCLK为低电平 1 空闲状态下SCLK为高电平 #define SPI_CTRL_CPOL_Msk (0x01 << SPI_CTRL_CPOL_Pos) -#define SPI_CTRL_FFS_Pos 10 //Frame Format Select, 0 SPI 1 TI SSI 2 SPI 3 SPI +#define SPI_CTRL_FFS_Pos 10 //Frame Format Select, 0 SPI 1 TI SSI 2 SPI 3 SPI #define SPI_CTRL_FFS_Msk (0x03 << SPI_CTRL_FFS_Pos) -#define SPI_CTRL_MSTR_Pos 12 //Master, 1 主模式 0 从模式 +#define SPI_CTRL_MSTR_Pos 12 //Master, 1 主模式 0 从模式 #define SPI_CTRL_MSTR_Msk (0x01 << SPI_CTRL_MSTR_Pos) #define SPI_CTRL_FAST_Pos 13 //1 SPI工作时钟 = SYS_Freq/2 0 SPI工作时钟由SPI->CTRL.CLKDIV设置 #define SPI_CTRL_FAST_Msk (0x01 << SPI_CTRL_FAST_Pos) #define SPI_CTRL_FILTE_Pos 16 //1 对SPI输入信号进行去抖操作 0 对SPI输入信号不进行去抖操作 #define SPI_CTRL_FILTE_Msk (0x01 << SPI_CTRL_FILTE_Pos) -#define SPI_CTRL_SSN_H_Pos 17 //0 传输过程中SSN始终为0 1 传输过程中每字符之间会将SSN拉高半个SCLK周期 +#define SPI_CTRL_SSN_H_Pos 17 //0 传输过程中SSN始终为0 1 传输过程中每字符之间会将SSN拉高半个SCLK周期 #define SPI_CTRL_SSN_H_Msk (0x01 << SPI_CTRL_SSN_H_Pos) #define SPI_CTRL_TFCLR_Pos 24 //TX FIFO Clear #define SPI_CTRL_TFCLR_Msk (0x01 << SPI_CTRL_TFCLR_Pos) @@ -1886,9 +1445,9 @@ typedef struct #define SPI_STAT_RFF_Msk (0x01 << SPI_STAT_RFF_Pos) #define SPI_STAT_RFOVF_Pos 5 //接收FIFO Overflow #define SPI_STAT_RFOVF_Msk (0x01 << SPI_STAT_RFOVF_Pos) -#define SPI_STAT_TFLVL_Pos 6 //发送FIFO中数据个数， 0 TFNF=0时表示FIFO内有8个数据，TFNF=1时表示FIFO内有0个数据 1--7 FIFO内有1--7个数据 +#define SPI_STAT_TFLVL_Pos 6 //发送FIFO中数据个数， 0 TFNF=0时表示FIFO内有8个数据，TFNF=1时表示FIFO内有0个数据 1--7 FIFO内有1--7个数据 #define SPI_STAT_TFLVL_Msk (0x07 << SPI_STAT_TFLVL_Pos) -#define SPI_STAT_RFLVL_Pos 9 //接收FIFO中数据个数， 0 RFF=1时表示FIFO内有8个数据， RFF=0时表示FIFO内有0个数据 1--7 FIFO内有1--7个数据 +#define SPI_STAT_RFLVL_Pos 9 //接收FIFO中数据个数， 0 RFF=1时表示FIFO内有8个数据， RFF=0时表示FIFO内有0个数据 1--7 FIFO内有1--7个数据 #define SPI_STAT_RFLVL_Msk (0x07 << SPI_STAT_RFLVL_Pos) #define SPI_STAT_BUSY_Pos 15 #define SPI_STAT_BUSY_Msk (0x01 << SPI_STAT_BUSY_Pos) @@ -1947,21 +1506,21 @@ typedef struct #define I2C_CTRL_EN_Pos 7 #define I2C_CTRL_EN_Msk (0x01 << I2C_CTRL_EN_Pos) -#define I2C_MSTCMD_IF_Pos 0 //1 有等待处理的中断，写1清零 有两种情况下此位硬件置位：1、一个字节传输完成 2、总线访问权丢失 +#define I2C_MSTCMD_IF_Pos 0 //1 有等待处理的中断，写1清零 有两种情况下此位硬件置位：1、一个字节传输完成 2、总线访问权丢失 #define I2C_MSTCMD_IF_Msk (0x01 << I2C_MSTCMD_IF_Pos) #define I2C_MSTCMD_TIP_Pos 1 //Transmission In Process #define I2C_MSTCMD_TIP_Msk (0x01 << I2C_MSTCMD_TIP_Pos) -#define I2C_MSTCMD_ACK_Pos 3 //接收模式下，0 向发送端反馈ACK 1 向发送端反馈NACK +#define I2C_MSTCMD_ACK_Pos 3 //接收模式下，0 向发送端反馈ACK 1 向发送端反馈NACK #define I2C_MSTCMD_ACK_Msk (0x01 << I2C_MSTCMD_ACK_Pos) -#define I2C_MSTCMD_WR_Pos 4 // 向Slave写数据时，把这一位写1，自动清零 +#define I2C_MSTCMD_WR_Pos 4 // 向Slave写数据时，把这一位写1，自动清零 #define I2C_MSTCMD_WR_Msk (0x01 << I2C_MSTCMD_WR_Pos) -#define I2C_MSTCMD_RD_Pos 5 //写：从Slave读数据时，把这一位写1，自动清零 读：当I2C模块失去总线的访问权时硬件置1 +#define I2C_MSTCMD_RD_Pos 5 //写：从Slave读数据时，把这一位写1，自动清零 读：当I2C模块失去总线的访问权时硬件置1 #define I2C_MSTCMD_RD_Msk (0x01 << I2C_MSTCMD_RD_Pos) #define I2C_MSTCMD_BUSY_Pos 6 //读：当检测到START之后，这一位变1；当检测到STOP之后，这一位变0 #define I2C_MSTCMD_BUSY_Msk (0x01 << I2C_MSTCMD_BUSY_Pos) #define I2C_MSTCMD_STO_Pos 6 //写：产生STOP，自动清零 #define I2C_MSTCMD_STO_Msk (0x01 << I2C_MSTCMD_STO_Pos) -#define I2C_MSTCMD_RXACK_Pos 7 //读：接收到的Slave的ACK位，0 收到ACK 1 收到NACK +#define I2C_MSTCMD_RXACK_Pos 7 //读：接收到的Slave的ACK位，0 收到ACK 1 收到NACK #define I2C_MSTCMD_RXACK_Msk (0x01 << I2C_MSTCMD_RXACK_Pos) #define I2C_MSTCMD_STA_Pos 7 //写：产生START，自动清零 #define I2C_MSTCMD_STA_Msk (0x01 << I2C_MSTCMD_STA_Pos) @@ -2050,13 +1609,13 @@ typedef struct #define ADC_CTRL_CH6_Msk (0x01 << ADC_CTRL_CH6_Pos) #define ADC_CTRL_CH7_Pos 7 #define ADC_CTRL_CH7_Msk (0x01 << ADC_CTRL_CH7_Pos) -#define ADC_CTRL_AVG_Pos 8 //0 1次采样 1 2次采样取平均值 3 4次采样取平均值 7 8次采样取平均值 15 16次采样取平均值 +#define ADC_CTRL_AVG_Pos 8 //0 1次采样 1 2次采样取平均值 3 4次采样取平均值 7 8次采样取平均值 15 16次采样取平均值 #define ADC_CTRL_AVG_Msk (0x0F << ADC_CTRL_AVG_Pos) #define ADC_CTRL_EN_Pos 12 #define ADC_CTRL_EN_Msk (0x01 << ADC_CTRL_EN_Pos) #define ADC_CTRL_CONT_Pos 13 //Continuous conversion，只在软件启动模式下有效，0 单次转换，转换完成后START位自动清除停止转换 #define ADC_CTRL_CONT_Msk (0x01 << ADC_CTRL_CONT_Pos) // 1 连续转换，启动后一直采样、转换，直到软件清除START位 -#define ADC_CTRL_TRIG_Pos 14 //转换触发方式：0 软件启动转换 1 PWM触发 +#define ADC_CTRL_TRIG_Pos 14 //转换触发方式：0 软件启动转换 1 PWM触发 #define ADC_CTRL_TRIG_Msk (0x01 << ADC_CTRL_TRIG_Pos) #define ADC_CTRL_CLKSRC_Pos 15 //0 VCO 1 HRC #define ADC_CTRL_CLKSRC_Msk (0x01 << ADC_CTRL_CLKSRC_Pos) @@ -2221,7 +1780,7 @@ typedef struct #define ADC_CTRL2_PGAGAIN_Pos 3 //0 25.1dB 1 21.6dB 2 11.1dB 3 3.5dB 4 0dB(1.8V) 5 -2.9dB 6 -5.3dB #define ADC_CTRL2_PGAGAIN_Msk (0x07 << ADC_CTRL2_PGAGAIN_Pos) #define ADC_CTRL2_REFPOUT_Pos 23 //1 ADC 内部 1.2V REFP电压输出到外部REFP引脚，用于测量，或在需要1.2V外部REFP时节省成本 -#define ADC_CTRL2_REFPOUT_Msk (0x01 << ADC_CTRL2_REFPOUT_Pos +#define ADC_CTRL2_REFPOUT_Msk (0x01 << ADC_CTRL2_REFPOUT_Pos #define ADC_CTRL2_CLKDIV_Pos 24 //时钟分频，只在时钟源为HRC时有效 #define ADC_CTRL2_CLKDIV_Msk (0x1F << ADC_CTRL2_CLKDIV_Pos) #define ADC_CTRL2_PGAVCM_Pos 29 @@ -2676,7 +2235,7 @@ typedef struct #define DMA_CR_AUTORE_Pos 18 //Auto Restart, 通道在传输完成后，是否自动重新启动 #define DMA_CR_AUTORE_Msk (0x01 << DMA_CR_AUTORE_Pos) -#define DMA_AM_SRCAM_Pos 0 //Address Mode 0 地址固定 1 地址递增 2 scatter gather模式 +#define DMA_AM_SRCAM_Pos 0 //Address Mode 0 地址固定 1 地址递增 2 scatter gather模式 #define DMA_AM_SRCAM_Msk (0x03 << DMA_AM_SRCAM_Pos) #define DMA_AM_DSTAM_Pos 8 #define DMA_AM_DSTAM_Msk (0x03 << DMA_AM_DSTAM_Pos) @@ -2724,22 +2283,12 @@ typedef struct uint32_t RESERVED[5]; } FILTER; - union + struct { //在正常工作模式下可读写，复位时不可访问 - struct - { - __O uint32_t INFO; + __IO uint32_t INFO; - __O uint32_t DATA[12]; - } TXFRAME; - - struct - { - __I uint32_t INFO; - - __I uint32_t DATA[12]; - } RXFRAME; - }; + __IO uint32_t DATA[12]; + } FRAME; }; __I uint32_t RMCNT; //Receive Message Count @@ -2877,11 +2426,11 @@ typedef struct #define LCD_START_BURST_Pos 2 #define LCD_START_BURST_Msk (0x01 << LCD_START_BURST_Pos) -#define LCD_CR0_VPIX_Pos 0 //当portrait为0时，表示垂直方向的像素个数，0表示1个，最大为767 \ - //当portrait为1时，表示水平方向的像素个数，0表示1个，最大为767 +#define LCD_CR0_VPIX_Pos 0 /*当portrait为0时，表示垂直方向的像素个数，0表示1个，最大为767 \ + //当portrait为1时，表示水平方向的像素个数，0表示1个，最大为767 */ #define LCD_CR0_VPIX_Msk (0x3FF << LCD_CR0_VPIX_Pos) -#define LCD_CR0_HPIX_Pos 10 //当portrait为0时，表示水平方向的像素个数，0表示1个，最大为1023 \ - //当portrait为1时，表示垂直方向的像素个数，0表示1个，最大为1023 +#define LCD_CR0_HPIX_Pos 10 /*当portrait为0时，表示水平方向的像素个数，0表示1个，最大为1023 \ + //当portrait为1时，表示垂直方向的像素个数，0表示1个，最大为1023 */ #define LCD_CR0_HPIX_Msk (0x3FF << LCD_CR0_HPIX_Pos) #define LCD_CR0_DCLK_Pos 20 //0 DOTCLK一直翻转 1 DOTCLK在空闲时停在1 #define LCD_CR0_DCLK_Msk (0x01 << LCD_CR0_DCLK_Pos) @@ -3121,7 +2670,7 @@ typedef struct { __IO uint32_t DATA; __IO uint32_t ADDR; - __IO uint32_t ERASE; + __IO uint32_t SWM_ERASE; __IO uint32_t CACHE; __IO uint32_t CFG0; __IO uint32_t CFG1; @@ -3376,8 +2925,8 @@ typedef struct #define RTC_TRIM_DEC_Pos 8 #define RTC_TRIM_DEC_Msk (0x01 << RTC_TRIM_DEC_Pos) -#define RTC_TRIMM_CYCLE_Pos 0 //用于计数周期微调，如果INC为1，则第n个计数周期调整为(32768±ADJ)+1,否则调整为(32768±ADJ)-1 \ - //cycles=0时，不进行微调整；cycles=1，则n为2；cycles=7，则n为8；以此类推 +#define RTC_TRIMM_CYCLE_Pos 0 /* 用于计数周期微调，如果INC为1，则第n个计数周期调整为(32768±ADJ)+1,否则调整为(32768±ADJ)-1 \ + //cycles=0时，不进行微调整；cycles=1，则n为2；cycles=7，则n为8；以此类推 */ #define RTC_TRIMM_CYCLE_Msk (0x07 << RTC_TRIMM_CYCLE_Pos) #define RTC_TRIMM_INC_Pos 3 #define RTC_TRIMM_INC_Msk (0x01 << RTC_TRIMM_INC_Pos) @@ -3401,7 +2950,7 @@ typedef struct #define WDT_CR_RSTEN_Msk (0x01 << WDT_CR_RSTEN_Pos) /******************************************************************************/ -/* Peripheral memory map */ +/* Peripheral memory map */ /******************************************************************************/ #define RAM_BASE 0x20000000 #define AHB_BASE 0x40000000 @@ -3477,7 +3026,7 @@ typedef struct #define CAN_BASE (APB_BASE + 0x20000) /******************************************************************************/ -/* Peripheral declaration */ +/* Peripheral declaration */ /******************************************************************************/ #define SYS ((SYS_TypeDef *)SYS_BASE) diff --git a/bsp/swm320/libraries/CMSIS/DeviceSupport/startup/arm/startup_SWM320.s b/bsp/swm320/libraries/CMSIS/DeviceSupport/startup/arm/startup_SWM320.s index db1c455bf9..1a16ebc768 100644 --- a/bsp/swm320/libraries/CMSIS/DeviceSupport/startup/arm/startup_SWM320.s +++ b/bsp/swm320/libraries/CMSIS/DeviceSupport/startup/arm/startup_SWM320.s @@ -79,7 +79,7 @@ __Vectors DCD __initial_sp ; Top of Stack DCD GPIOA5_Handler DCD GPIOA6_Handler DCD GPIOA7_Handler - DCD GPIOB0_Handler + DCD GPIOB0_Handler DCD GPIOB1_Handler DCD GPIOB2_Handler DCD GPIOB3_Handler @@ -157,262 +157,262 @@ Reset_Handler PROC ; Dummy Exception Handlers (infinite loops which can be modified) NMI_Handler PROC - EXPORT NMI_Handler [WEAK] + EXPORT NMI_Handler [WEAK] B . ENDP HardFault_Handler PROC - EXPORT HardFault_Handler [WEAK] + EXPORT HardFault_Handler [WEAK] B . ENDP MemManage_Handler PROC - EXPORT MemManage_Handler [WEAK] + EXPORT MemManage_Handler [WEAK] B . ENDP BusFault_Handler PROC - EXPORT BusFault_Handler [WEAK] + EXPORT BusFault_Handler [WEAK] B . ENDP UsageFault_Handler PROC - EXPORT UsageFault_Handler [WEAK] + EXPORT UsageFault_Handler [WEAK] B . ENDP SVC_Handler PROC - EXPORT SVC_Handler [WEAK] + EXPORT SVC_Handler [WEAK] B . ENDP DebugMon_Handler PROC - EXPORT DebugMon_Handler [WEAK] + EXPORT DebugMon_Handler [WEAK] B . ENDP PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] + EXPORT PendSV_Handler [WEAK] B . ENDP SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] + EXPORT SysTick_Handler [WEAK] B . ENDP GPIOA0_Handler PROC - EXPORT GPIOA0_Handler [WEAK] + EXPORT GPIOA0_Handler [WEAK] B . ENDP GPIOA1_Handler PROC - EXPORT GPIOA1_Handler [WEAK] + EXPORT GPIOA1_Handler [WEAK] B . ENDP GPIOA2_Handler PROC - EXPORT GPIOA2_Handler [WEAK] + EXPORT GPIOA2_Handler [WEAK] B . ENDP GPIOA3_Handler PROC - EXPORT GPIOA3_Handler [WEAK] + EXPORT GPIOA3_Handler [WEAK] B . ENDP GPIOA4_Handler PROC - EXPORT GPIOA4_Handler [WEAK] + EXPORT GPIOA4_Handler [WEAK] B . ENDP GPIOA5_Handler PROC - EXPORT GPIOA5_Handler [WEAK] + EXPORT GPIOA5_Handler [WEAK] B . ENDP GPIOA6_Handler PROC - EXPORT GPIOA6_Handler [WEAK] + EXPORT GPIOA6_Handler [WEAK] B . ENDP GPIOA7_Handler PROC - EXPORT GPIOA7_Handler [WEAK] + EXPORT GPIOA7_Handler [WEAK] B . ENDP GPIOB0_Handler PROC - EXPORT GPIOB0_Handler [WEAK] + EXPORT GPIOB0_Handler [WEAK] B . ENDP GPIOB1_Handler PROC - EXPORT GPIOB1_Handler [WEAK] + EXPORT GPIOB1_Handler [WEAK] B . ENDP GPIOB2_Handler PROC - EXPORT GPIOB2_Handler [WEAK] + EXPORT GPIOB2_Handler [WEAK] B . ENDP GPIOB3_Handler PROC - EXPORT GPIOB3_Handler [WEAK] + EXPORT GPIOB3_Handler [WEAK] B . ENDP GPIOB4_Handler PROC - EXPORT GPIOB4_Handler [WEAK] + EXPORT GPIOB4_Handler [WEAK] B . ENDP GPIOB5_Handler PROC - EXPORT GPIOB5_Handler [WEAK] + EXPORT GPIOB5_Handler [WEAK] B . ENDP GPIOB6_Handler PROC - EXPORT GPIOB6_Handler [WEAK] + EXPORT GPIOB6_Handler [WEAK] B . ENDP GPIOB7_Handler PROC - EXPORT GPIOB7_Handler [WEAK] + EXPORT GPIOB7_Handler [WEAK] B . ENDP GPIOC0_Handler PROC - EXPORT GPIOC0_Handler [WEAK] + EXPORT GPIOC0_Handler [WEAK] B . ENDP GPIOC1_Handler PROC - EXPORT GPIOC1_Handler [WEAK] + EXPORT GPIOC1_Handler [WEAK] B . ENDP GPIOC2_Handler PROC - EXPORT GPIOC2_Handler [WEAK] + EXPORT GPIOC2_Handler [WEAK] B . ENDP GPIOC3_Handler PROC - EXPORT GPIOC3_Handler [WEAK] + EXPORT GPIOC3_Handler [WEAK] B . ENDP GPIOC4_Handler PROC - EXPORT GPIOC4_Handler [WEAK] + EXPORT GPIOC4_Handler [WEAK] B . ENDP GPIOC5_Handler PROC - EXPORT GPIOC5_Handler [WEAK] + EXPORT GPIOC5_Handler [WEAK] B . ENDP GPIOC6_Handler PROC - EXPORT GPIOC6_Handler [WEAK] + EXPORT GPIOC6_Handler [WEAK] B . ENDP GPIOC7_Handler PROC - EXPORT GPIOC7_Handler [WEAK] + EXPORT GPIOC7_Handler [WEAK] B . ENDP GPIOM0_Handler PROC - EXPORT GPIOM0_Handler [WEAK] + EXPORT GPIOM0_Handler [WEAK] B . ENDP GPIOM1_Handler PROC - EXPORT GPIOM1_Handler [WEAK] + EXPORT GPIOM1_Handler [WEAK] B . ENDP GPIOM2_Handler PROC - EXPORT GPIOM2_Handler [WEAK] + EXPORT GPIOM2_Handler [WEAK] B . ENDP GPIOM3_Handler PROC - EXPORT GPIOM3_Handler [WEAK] + EXPORT GPIOM3_Handler [WEAK] B . ENDP GPIOM4_Handler PROC - EXPORT GPIOM4_Handler [WEAK] + EXPORT GPIOM4_Handler [WEAK] B . ENDP GPIOM5_Handler PROC - EXPORT GPIOM5_Handler [WEAK] + EXPORT GPIOM5_Handler [WEAK] B . ENDP GPIOM6_Handler PROC - EXPORT GPIOM6_Handler [WEAK] + EXPORT GPIOM6_Handler [WEAK] B . ENDP GPIOM7_Handler PROC - EXPORT GPIOM7_Handler [WEAK] + EXPORT GPIOM7_Handler [WEAK] B . ENDP DMA_Handler PROC - EXPORT DMA_Handler [WEAK] + EXPORT DMA_Handler [WEAK] B . ENDP LCD_Handler PROC - EXPORT LCD_Handler [WEAK] + EXPORT LCD_Handler [WEAK] B . ENDP NORFLC_Handler PROC - EXPORT NORFLC_Handler [WEAK] + EXPORT NORFLC_Handler [WEAK] B . ENDP CAN_Handler PROC - EXPORT CAN_Handler [WEAK] + EXPORT CAN_Handler [WEAK] B . ENDP PULSE_Handler PROC - EXPORT PULSE_Handler [WEAK] + EXPORT PULSE_Handler [WEAK] B . ENDP WDT_Handler PROC - EXPORT WDT_Handler [WEAK] + EXPORT WDT_Handler [WEAK] B . ENDP PWM_Handler PROC - EXPORT PWM_Handler [WEAK] + EXPORT PWM_Handler [WEAK] B . ENDP UART0_Handler PROC - EXPORT UART0_Handler [WEAK] + EXPORT UART0_Handler [WEAK] B . ENDP UART1_Handler PROC - EXPORT UART1_Handler [WEAK] + EXPORT UART1_Handler [WEAK] B . ENDP UART2_Handler PROC - EXPORT UART2_Handler [WEAK] + EXPORT UART2_Handler [WEAK] B . ENDP UART3_Handler PROC - EXPORT UART3_Handler [WEAK] + EXPORT UART3_Handler [WEAK] B . ENDP @@ -437,12 +437,12 @@ ADC0_Handler PROC ENDP RTC_Handler PROC - EXPORT RTC_Handler [WEAK] + EXPORT RTC_Handler [WEAK] B . ENDP BOD_Handler PROC - EXPORT BOD_Handler [WEAK] + EXPORT BOD_Handler [WEAK] B . ENDP @@ -452,32 +452,32 @@ SDIO_Handler PROC ENDP GPIOA_Handler PROC - EXPORT GPIOA_Handler [WEAK] + EXPORT GPIOA_Handler [WEAK] B . ENDP GPIOB_Handler PROC - EXPORT GPIOB_Handler [WEAK] + EXPORT GPIOB_Handler [WEAK] B . ENDP GPIOC_Handler PROC - EXPORT GPIOC_Handler [WEAK] + EXPORT GPIOC_Handler [WEAK] B . ENDP GPIOM_Handler PROC - EXPORT GPIOM_Handler [WEAK] + EXPORT GPIOM_Handler [WEAK] B . ENDP GPION_Handler PROC - EXPORT GPION_Handler [WEAK] + EXPORT GPION_Handler [WEAK] B . ENDP GPIOP_Handler PROC - EXPORT GPIOP_Handler [WEAK] + EXPORT GPIOP_Handler [WEAK] B . ENDP @@ -487,7 +487,7 @@ ADC1_Handler PROC ENDP FPU_Handler PROC - EXPORT FPU_Handler [WEAK] + EXPORT FPU_Handler [WEAK] B . ENDP diff --git a/bsp/swm320/libraries/CMSIS/DeviceSupport/startup/gcc/startup_SWM320.s b/bsp/swm320/libraries/CMSIS/DeviceSupport/startup/gcc/startup_SWM320.s index 1a59a2318a..c0bf32e04a 100644 --- a/bsp/swm320/libraries/CMSIS/DeviceSupport/startup/gcc/startup_SWM320.s +++ b/bsp/swm320/libraries/CMSIS/DeviceSupport/startup/gcc/startup_SWM320.s @@ -1,242 +1,406 @@ - .syntax unified - .arch armv7-m - .thumb -/* Memory Model - The HEAP starts at the end of the DATA section and grows upward. - - The STACK starts at the end of the RAM and grows downward */ - .section .stack - .align 3 - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space 0x4000 -__StackTop: + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb +.global g_pfnVectors +.global Default_Handler - .section .heap - .align 3 - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .space 0x4000 -__HeapLimit: +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ - .section .isr_vector - .align 2 - .globl __isr_vector -__isr_vector: - .long __StackTop - .long Reset_Handler - .long NMI_Handler - .long HardFault_Handler - .long MemManage_Handler - .long BusFault_Handler - .long UsageFault_Handler - .long 0 - .long 0 - .long 0 - .long 0 - .long SVC_Handler - .long DebugMon_Handler - .long 0 - .long PendSV_Handler - .long SysTick_Handler + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ - /* External interrupts */ - .long GPIOA0_Handler - .long GPIOA1_Handler - .long GPIOA2_Handler - .long GPIOA3_Handler - .long GPIOA4_Handler - .long GPIOA5_Handler - .long GPIOA6_Handler - .long GPIOA7_Handler - .long GPIOB0_Handler - .long GPIOB1_Handler - .long GPIOB2_Handler - .long GPIOB3_Handler - .long GPIOB4_Handler - .long GPIOB5_Handler - .long GPIOB6_Handler - .long GPIOB7_Handler - .long GPIOC0_Handler - .long GPIOC1_Handler - .long GPIOC2_Handler - .long GPIOC3_Handler - .long GPIOC4_Handler - .long GPIOC5_Handler - .long GPIOC6_Handler - .long GPIOC7_Handler - .long GPIOM0_Handler - .long GPIOM1_Handler - .long GPIOM2_Handler - .long GPIOM3_Handler - .long GPIOM4_Handler - .long GPIOM5_Handler - .long GPIOM6_Handler - .long GPIOM7_Handler - .long DMA_Handler - .long LCD_Handler - .long NORFLC_Handler - .long CAN_Handler - .long PULSE_Handler - .long WDT_Handler - .long PWM_Handler - .long UART0_Handler - .long UART1_Handler - .long UART2_Handler - .long UART3_Handler - .long Default_Handler - .long I2C0_Handler - .long I2C1_Handler - .long SPI0_Handler - .long ADC0_Handler - .long RTC_Handler - .long BOD_Handler - .long SDIO_Handler - .long GPIOA_Handler - .long GPIOB_Handler - .long GPIOC_Handler - .long GPIOM_Handler - .long GPION_Handler - .long GPIOP_Handler - .long ADC1_Handler - .long FPU_Handler - .long SPI1_Handler - .long TIMR0_Handler - .long TIMR1_Handler - .long TIMR2_Handler - .long TIMR3_Handler - .long TIMR4_Handler - .long TIMR5_Handler +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit - .section .text.Reset_Handler - .align 2 - .globl Reset_Handler - .type Reset_Handler, %function -Reset_Handler: -/* Loop to copy data from read only memory to RAM. The ranges - * of copy from/to are specified by symbols evaluated in linker script. */ - ldr sp, =__StackTop /* set stack pointer */ +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss +/* Call the application's entry point.*/ + bl entry + bx lr +.size Reset_Handler, .-Reset_Handler - ldr r1, =__data_load__ - ldr r2, =__data_start__ - ldr r3, =__data_end__ +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word GPIOA0_Handler + .word GPIOA1_Handler + .word GPIOA2_Handler + .word GPIOA3_Handler + .word GPIOA4_Handler + .word GPIOA5_Handler + .word GPIOA6_Handler + .word GPIOA7_Handler + .word GPIOB0_Handler + .word GPIOB1_Handler + .word GPIOB2_Handler + .word GPIOB3_Handler + .word GPIOB4_Handler + .word GPIOB5_Handler + .word GPIOB6_Handler + .word GPIOB7_Handler + .word GPIOC0_Handler + .word GPIOC1_Handler + .word GPIOC2_Handler + .word GPIOC3_Handler + .word GPIOC4_Handler + .word GPIOC5_Handler + .word GPIOC6_Handler + .word GPIOC7_Handler + .word GPIOM0_Handler + .word GPIOM1_Handler + .word GPIOM2_Handler + .word GPIOM3_Handler + .word GPIOM4_Handler + .word GPIOM5_Handler + .word GPIOM6_Handler + .word GPIOM7_Handler + .word DMA_Handler + .word LCD_Handler + .word NORFLC_Handler + .word CAN_Handler + .word PULSE_Handler + .word WDT_Handler + .word PWM_Handler + .word UART0_Handler + .word UART1_Handler + .word UART2_Handler + .word UART3_Handler + .word 0 + .word I2C0_Handler + .word I2C1_Handler + .word SPI0_Handler + .word ADC0_Handler + .word RTC_Handler + .word ANAC_Handler + .word SDIO_Handler + .word GPIOA_Handler + .word GPIOB_Handler + .word GPIOC_Handler + .word GPIOM_Handler + .word GPION_Handler + .word GPIOP_Handler + .word ADC1_Handler + .word FPU_Handler + .word SPI1_Handler + .word TIMR0_Handler + .word TIMR1_Handler + .word TIMR2_Handler + .word TIMR3_Handler + .word TIMR4_Handler + .word TIMR5_Handler +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler -.Lflash_to_ram_loop: - cmp r2, r3 - ittt lo - ldrlo r0, [r1], #4 - strlo r0, [r2], #4 - blo .Lflash_to_ram_loop + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler - ldr r2, =__bss_start__ - ldr r3, =__bss_end__ + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler -.Lbss_to_ram_loop: - cmp r2, r3 - ittt lo - movlo r0, #0 - strlo r0, [r2], #4 - blo .Lbss_to_ram_loop + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler - ldr r0, =main - bx r0 - .pool + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler - .text -/* Macro to define default handlers. - Default handler will be weak symbol and just dead loops. */ - .macro def_default_handler handler_name - .align 1 - .thumb_func - .weak \handler_name - .type \handler_name, %function -\handler_name : - b . - .endm + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler - def_default_handler NMI_Handler - def_default_handler HardFault_Handler - def_default_handler MemManage_Handler - def_default_handler BusFault_Handler - def_default_handler UsageFault_Handler - def_default_handler SVC_Handler - def_default_handler DebugMon_Handler - def_default_handler PendSV_Handler - def_default_handler SysTick_Handler + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler - def_default_handler GPIOA0_Handler - def_default_handler GPIOA1_Handler - def_default_handler GPIOA2_Handler - def_default_handler GPIOA3_Handler - def_default_handler GPIOA4_Handler - def_default_handler GPIOA5_Handler - def_default_handler GPIOA6_Handler - def_default_handler GPIOA7_Handler - def_default_handler GPIOB0_Handler - def_default_handler GPIOB1_Handler - def_default_handler GPIOB2_Handler - def_default_handler GPIOB3_Handler - def_default_handler GPIOB4_Handler - def_default_handler GPIOB5_Handler - def_default_handler GPIOB6_Handler - def_default_handler GPIOB7_Handler - def_default_handler GPIOC0_Handler - def_default_handler GPIOC1_Handler - def_default_handler GPIOC2_Handler - def_default_handler GPIOC3_Handler - def_default_handler GPIOC4_Handler - def_default_handler GPIOC5_Handler - def_default_handler GPIOC6_Handler - def_default_handler GPIOC7_Handler - def_default_handler GPIOM0_Handler - def_default_handler GPIOM1_Handler - def_default_handler GPIOM2_Handler - def_default_handler GPIOM3_Handler - def_default_handler GPIOM4_Handler - def_default_handler GPIOM5_Handler - def_default_handler GPIOM6_Handler - def_default_handler GPIOM7_Handler - def_default_handler DMA_Handler - def_default_handler LCD_Handler - def_default_handler NORFLC_Handler - def_default_handler CAN_Handler - def_default_handler PULSE_Handler - def_default_handler WDT_Handler - def_default_handler PWM_Handler - def_default_handler UART0_Handler - def_default_handler UART1_Handler - def_default_handler UART2_Handler - def_default_handler UART3_Handler - def_default_handler I2C0_Handler - def_default_handler I2C1_Handler - def_default_handler SPI0_Handler - def_default_handler ADC0_Handler - def_default_handler RTC_Handler - def_default_handler BOD_Handler - def_default_handler SDIO_Handler - def_default_handler GPIOA_Handler - def_default_handler GPIOB_Handler - def_default_handler GPIOC_Handler - def_default_handler GPIOM_Handler - def_default_handler GPION_Handler - def_default_handler GPIOP_Handler - def_default_handler ADC1_Handler - def_default_handler FPU_Handler - def_default_handler SPI1_Handler - def_default_handler TIMR0_Handler - def_default_handler TIMR1_Handler - def_default_handler TIMR2_Handler - def_default_handler TIMR3_Handler - def_default_handler TIMR4_Handler - def_default_handler TIMR5_Handler + .weak GPIOA0_Handler + .thumb_set GPIOA0_Handler,Default_Handler - def_default_handler Default_Handler + .weak GPIOA1_Handler + .thumb_set GPIOA1_Handler,Default_Handler + + .weak GPIOA2_Handler + .thumb_set GPIOA2_Handler,Default_Handler + + .weak GPIOA3_Handler + .thumb_set GPIOA3_Handler,Default_Handler + + .weak GPIOA4_Handler + .thumb_set GPIOA4_Handler,Default_Handler + + .weak GPIOA5_Handler + .thumb_set GPIOA5_Handler,Default_Handler + + .weak GPIOA6_Handler + .thumb_set GPIOA6_Handler,Default_Handler + + .weak GPIOA7_Handler + .thumb_set GPIOA7_Handler,Default_Handler + + .weak GPIOB0_Handler + .thumb_set GPIOB0_Handler,Default_Handler + + .weak GPIOB1_Handler + .thumb_set GPIOB1_Handler,Default_Handler + + .weak GPIOB2_Handler + .thumb_set GPIOB2_Handler,Default_Handler + + .weak GPIOB3_Handler + .thumb_set GPIOB3_Handler,Default_Handler + + .weak GPIOB4_Handler + .thumb_set GPIOB4_Handler,Default_Handler + + .weak GPIOB5_Handler + .thumb_set GPIOB5_Handler,Default_Handler + + .weak GPIOB6_Handler + .thumb_set GPIOB6_Handler,Default_Handler + + .weak GPIOB7_Handler + .thumb_set GPIOB7_Handler,Default_Handler + + .weak GPIOC0_Handler + .thumb_set GPIOC0_Handler,Default_Handler + + .weak GPIOC1_Handler + .thumb_set GPIOC1_Handler,Default_Handler + + .weak GPIOC2_Handler + .thumb_set GPIOC2_Handler,Default_Handler + + .weak GPIOC3_Handler + .thumb_set GPIOC3_Handler,Default_Handler + + .weak GPIOC4_Handler + .thumb_set GPIOC4_Handler,Default_Handler + + .weak GPIOC5_Handler + .thumb_set GPIOC5_Handler,Default_Handler + + .weak GPIOC6_Handler + .thumb_set GPIOC6_Handler,Default_Handler + + .weak GPIOC7_Handler + .thumb_set GPIOC7_Handler,Default_Handler + + .weak GPIOM0_Handler + .thumb_set GPIOM0_Handler,Default_Handler + + .weak GPIOM1_Handler + .thumb_set GPIOM1_Handler,Default_Handler + + .weak GPIOM2_Handler + .thumb_set GPIOM2_Handler,Default_Handler + + .weak GPIOM3_Handler + .thumb_set GPIOM3_Handler,Default_Handler + + .weak GPIOM4_Handler + .thumb_set GPIOM4_Handler,Default_Handler + + .weak GPIOM5_Handler + .thumb_set GPIOM5_Handler,Default_Handler + + .weak GPIOM6_Handler + .thumb_set GPIOM6_Handler,Default_Handler + + .weak GPIOM7_Handler + .thumb_set GPIOM7_Handler,Default_Handler + + .weak DMA_Handler + .thumb_set DMA_Handler,Default_Handler + + .weak LCD_Handler + .thumb_set LCD_Handler,Default_Handler + + .weak NORFLC_Handler + .thumb_set NORFLC_Handler,Default_Handler + + .weak CAN_Handler + .thumb_set CAN_Handler,Default_Handler + + .weak PULSE_Handler + .thumb_set PULSE_Handler,Default_Handler + + .weak WDT_Handler + .thumb_set WDT_Handler,Default_Handler + + .weak PWM_Handler + .thumb_set PWM_Handler,Default_Handler + + .weak UART0_Handler + .thumb_set UART0_Handler,Default_Handler + + .weak UART1_Handler + .thumb_set UART1_Handler,Default_Handler + + .weak UART2_Handler + .thumb_set UART2_Handler,Default_Handler + + .weak UART3_Handler + .thumb_set UART3_Handler,Default_Handler + + .weak I2C0_Handler + .thumb_set I2C0_Handler,Default_Handler + + .weak I2C1_Handler + .thumb_set I2C1_Handler,Default_Handler + + .weak SPI0_Handler + .thumb_set SPI0_Handler,Default_Handler + + .weak ADC0_Handler + .thumb_set ADC0_Handler,Default_Handler + + .weak RTC_Handler + .thumb_set RTC_Handler,Default_Handler + + .weak ANAC_Handler + .thumb_set ANAC_Handler,Default_Handler + + .weak SDIO_Handler + .thumb_set SDIO_Handler,Default_Handler + + .weak GPIOA_Handler + .thumb_set GPIOA_Handler,Default_Handler + + .weak GPIOB_Handler + .thumb_set GPIOB_Handler,Default_Handler + + .weak GPIOC_Handler + .thumb_set GPIOC_Handler,Default_Handler + + .weak GPIOM_Handler + .thumb_set GPIOM_Handler,Default_Handler + + .weak GPION_Handler + .thumb_set GPION_Handler,Default_Handler + + .weak GPIOP_Handler + .thumb_set GPIOP_Handler,Default_Handler + + .weak ADC1_Handler + .thumb_set ADC1_Handler,Default_Handler + + .weak FPU_Handler + .thumb_set FPU_Handler,Default_Handler + + .weak SPI1_Handler + .thumb_set SPI1_Handler,Default_Handler + + .weak TIMR0_Handler + .thumb_set TIMR0_Handler,Default_Handler + + .weak TIMR1_Handler + .thumb_set TIMR1_Handler,Default_Handler + + .weak TIMR2_Handler + .thumb_set TIMR2_Handler,Default_Handler + + .weak TIMR3_Handler + .thumb_set TIMR3_Handler,Default_Handler + + .weak TIMR4_Handler + .thumb_set TIMR4_Handler,Default_Handler + + .weak TIMR5_Handler + .thumb_set TIMR5_Handler,Default_Handler - .end diff --git a/bsp/swm320/libraries/CMSIS/DeviceSupport/system_SWM320.c b/bsp/swm320/libraries/CMSIS/DeviceSupport/system_SWM320.c index 0797d828f9..578d15da79 100644 --- a/bsp/swm320/libraries/CMSIS/DeviceSupport/system_SWM320.c +++ b/bsp/swm320/libraries/CMSIS/DeviceSupport/system_SWM320.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** -* 文件名称: system_SWM320.c -* 功能说明: SWM320单片机的时钟设置 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +/****************************************************************************************************************************************** +* 文件名称: system_SWM320.c +* 功能说明: SWM320单片机的时钟设置 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -43,7 +43,8 @@ /********************************** PLL 设定 ********************************************** * VCO输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV - * PLL输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV / OUTDIV = VCO输出频率 / OUTDIV + * PLL输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV / OUTDIV = VCO输出频率 / OUTDIV + * 注意：VCO输出频率需要在 [600MHz, 1200MHz] 之间 *****************************************************************************************/ #define SYS_PLL_SRC SYS_CLK_20MHz //可取值SYS_CLK_20MHz、SYS_CLK_XTAL @@ -60,12 +61,12 @@ uint32_t SystemCoreClock = __HSI; //System Clock Frequency (Core Clock) uint32_t CyclesPerUs = (__HSI / 1000000); //Cycles per micro second -/****************************************************************************************************************************************** -* 函数名称: +/****************************************************************************************************************************************** +* 函数名称: * 功能说明: This function is used to update the variable SystemCoreClock and must be called whenever the core clock is changed -* 输 入: -* 输 出: -* 注意事项: +* 输 入: +* 输 出: +* 注意事项: ******************************************************************************************************************************************/ void SystemCoreClockUpdate(void) { @@ -114,12 +115,12 @@ void SystemCoreClockUpdate(void) CyclesPerUs = SystemCoreClock / 1000000; } -/****************************************************************************************************************************************** -* 函数名称: +/****************************************************************************************************************************************** +* 函数名称: * 功能说明: The necessary initializaiton of systerm -* 输 入: -* 输 出: -* 注意事项: +* 输 入: +* 输 出: +* 注意事项: ******************************************************************************************************************************************/ void SystemInit(void) { @@ -173,15 +174,29 @@ void SystemInit(void) } } -void switchCLK_20MHz(void) +static void delay_3ms(void) { uint32_t i; + if (((SYS->CLKSEL & SYS_CLKSEL_SYS_Msk) == 0) && + ((SYS->CLKSEL & SYS_CLKSEL_LFCK_Msk) == 0)) //32KHz + { + for (i = 0; i < 20; i++) + __NOP(); + } + else + { + for (i = 0; i < 20000; i++) + __NOP(); + } +} + +void switchCLK_20MHz(void) +{ SYS->HRCCR = (0 << SYS_HRCCR_OFF_Pos) | (0 << SYS_HRCCR_DBL_Pos); //HRC = 20MHz - for (i = 0; i < 1000; i++) - __NOP(); + delay_3ms(); SYS->CLKSEL &= ~SYS_CLKSEL_HFCK_Msk; //HFCK <= HRC SYS->CLKSEL |= (1 << SYS_CLKSEL_SYS_Pos); //SYS_CLK <= HFCK @@ -189,13 +204,10 @@ void switchCLK_20MHz(void) void switchCLK_40MHz(void) { - uint32_t i; - SYS->HRCCR = (0 << SYS_HRCCR_OFF_Pos) | (1 << SYS_HRCCR_DBL_Pos); //HRC = 40MHz - for (i = 0; i < 1000; i++) - __NOP(); + delay_3ms(); SYS->CLKSEL &= ~SYS_CLKSEL_HFCK_Msk; //HFCK <= HRC SYS->CLKSEL |= (1 << SYS_CLKSEL_SYS_Pos); //SYS_CLK <= HFCK @@ -203,14 +215,11 @@ void switchCLK_40MHz(void) void switchCLK_32KHz(void) { - uint32_t i; - SYS->CLKEN |= (1 << SYS_CLKEN_RTCBKP_Pos); SYS->LRCCR &= ~(1 << SYS_LRCCR_OFF_Pos); - for (i = 0; i < 100; i++) - __NOP(); + delay_3ms(); SYS->CLKSEL &= ~SYS_CLKSEL_LFCK_Msk; //LFCK <= LRC SYS->CLKSEL &= ~SYS_CLKSEL_SYS_Msk; //SYS_CLK <= LFCK @@ -218,12 +227,10 @@ void switchCLK_32KHz(void) void switchCLK_XTAL(void) { - uint32_t i; - SYS->XTALCR = (1 << SYS_XTALCR_EN_Pos); - for (i = 0; i < 1000; i++) - __NOP(); + delay_3ms(); + delay_3ms(); SYS->CLKSEL |= (1 << SYS_CLKSEL_HFCK_Pos); //HFCK <= XTAL SYS->CLKSEL |= (1 << SYS_CLKSEL_SYS_Pos); //SYS_CLK <= HFCK @@ -231,13 +238,9 @@ void switchCLK_XTAL(void) void switchCLK_PLL(void) { - uint32_t i; - PLLInit(); - SYS->PLLCR |= (1 << SYS_PLLCR_OUTEN_Pos); - for (i = 0; i < 10000; i++) - __NOP(); + SYS->PLLCR |= (1 << SYS_PLLCR_OUTEN_Pos); SYS->CLKSEL |= (1 << SYS_CLKSEL_LFCK_Pos); //LFCK <= PLL SYS->CLKSEL &= ~SYS_CLKSEL_SYS_Msk; //SYS_CLK <= LFCK @@ -245,15 +248,12 @@ void switchCLK_PLL(void) void PLLInit(void) { - uint32_t i; - if (SYS_PLL_SRC == SYS_CLK_20MHz) { SYS->HRCCR = (0 << SYS_HRCCR_OFF_Pos) | (0 << SYS_HRCCR_DBL_Pos); //HRC = 20MHz - for (i = 0; i < 1000; i++) - __NOP(); + delay_3ms(); SYS->PLLCR |= (1 << SYS_PLLCR_INSEL_Pos); //PLL_SRC <= HRC } @@ -261,8 +261,8 @@ void PLLInit(void) { SYS->XTALCR = (1 << SYS_XTALCR_EN_Pos); - for (i = 0; i < 20000; i++) - ; + delay_3ms(); + delay_3ms(); SYS->PLLCR &= ~(1 << SYS_PLLCR_INSEL_Pos); //PLL_SRC <= XTAL } diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_adc.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_adc.c index 983b4bcff1..0fcd4d1eb1 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_adc.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_adc.c @@ -1,29 +1,29 @@ -/****************************************************************************************************************************************** -* 文件名称: SWM320_adc.c -* 功能说明: SWM320单片机的ADC数模转换器功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +/****************************************************************************************************************************************** +* 文件名称: SWM320_adc.c +* 功能说明: SWM320单片机的ADC数模转换器功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_adc.h" -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: ADC_Init() -* 功能说明: ADC模数转换器初始化 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，有效值包括ADC0、ADC1 -* ADC_InitStructure * initStruct 包含ADC各相关定值的结构体 +* 功能说明: ADC模数转换器初始化 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，有效值包括ADC0、ADC1 +* ADC_InitStructure * initStruct 包含ADC各相关定值的结构体 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -152,10 +152,10 @@ void ADC_Init(ADC_TypeDef *ADCx, ADC_InitStructure *initStruct) } } -/****************************************************************************************************************************************** -* 函数名称: ADC_Open() -* 功能说明: ADC开启，可以软件启动、或硬件触发ADC转换 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +/****************************************************************************************************************************************** +* 函数名称: ADC_Open() +* 功能说明: ADC开启，可以软件启动、或硬件触发ADC转换 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -164,10 +164,10 @@ void ADC_Open(ADC_TypeDef *ADCx) ADCx->CTRL |= (0x01 << ADC_CTRL_EN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: ADC_Close() -* 功能说明: ADC关闭，无法软件启动、或硬件触发ADC转换 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +/****************************************************************************************************************************************** +* 函数名称: ADC_Close() +* 功能说明: ADC关闭，无法软件启动、或硬件触发ADC转换 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -176,10 +176,10 @@ void ADC_Close(ADC_TypeDef *ADCx) ADCx->CTRL &= ~(0x01 << ADC_CTRL_EN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: ADC_Start() -* 功能说明: 软件触发模式下启动ADC转换 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +/****************************************************************************************************************************************** +* 函数名称: ADC_Start() +* 功能说明: 软件触发模式下启动ADC转换 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -188,10 +188,10 @@ void ADC_Start(ADC_TypeDef *ADCx) ADCx->START |= (0x01 << ADC_START_GO_Pos); } -/****************************************************************************************************************************************** -* 函数名称: ADC_Stop() -* 功能说明: 软件触发模式下停止ADC转换 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +/****************************************************************************************************************************************** +* 函数名称: ADC_Stop() +* 功能说明: 软件触发模式下停止ADC转换 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -235,12 +235,12 @@ static uint32_t chn2idx(uint32_t chn) return idx; } -/****************************************************************************************************************************************** -* 函数名称: ADC_Read() -* 功能说明: 从指定通道读取转换结果 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要读取转换结果的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 -* 输 出: uint32_t 读取到的转换结果 +/****************************************************************************************************************************************** +* 函数名称: ADC_Read() +* 功能说明: 从指定通道读取转换结果 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要读取转换结果的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +* 输 出: uint32_t 读取到的转换结果 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t ADC_Read(ADC_TypeDef *ADCx, uint32_t chn) @@ -255,12 +255,12 @@ uint32_t ADC_Read(ADC_TypeDef *ADCx, uint32_t chn) return dat; } -/****************************************************************************************************************************************** -* 函数名称: ADC_IsEOC() -* 功能说明: 指定通道是否End Of Conversion -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要查询状态的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 -* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 +/****************************************************************************************************************************************** +* 函数名称: ADC_IsEOC() +* 功能说明: 指定通道是否End Of Conversion +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要查询状态的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t ADC_IsEOC(ADC_TypeDef *ADCx, uint32_t chn) @@ -270,11 +270,11 @@ uint32_t ADC_IsEOC(ADC_TypeDef *ADCx, uint32_t chn) return (ADCx->CH[idx].STAT & ADC_STAT_EOC_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: ADC_ChnSelect() -* 功能说明: ADC通道选通，模数转换会在选通的通道上依次采样转换 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chns 要选通的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7及其组合（即“按位或”运算） +/****************************************************************************************************************************************** +* 函数名称: ADC_ChnSelect() +* 功能说明: ADC通道选通，模数转换会在选通的通道上依次采样转换 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chns 要选通的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7及其组合（即“按位或”运算） * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -284,11 +284,11 @@ void ADC_ChnSelect(ADC_TypeDef *ADCx, uint32_t chns) ADCx->CTRL |= (chns << ADC_CTRL_CH0_Pos); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntEOCEn() -* 功能说明: 转换完成中断使能 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntEOCEn() +* 功能说明: 转换完成中断使能 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -299,11 +299,11 @@ void ADC_IntEOCEn(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IE |= (0x01 << (idx * 4)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntEOCDis() -* 功能说明: 转换完成中断禁止 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntEOCDis() +* 功能说明: 转换完成中断禁止 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -314,11 +314,11 @@ void ADC_IntEOCDis(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IE &= ~(0x01 << (idx * 4)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntEOCClr() -* 功能说明: 转换完成中断标志清除 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntEOCClr() +* 功能说明: 转换完成中断标志清除 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -329,12 +329,12 @@ void ADC_IntEOCClr(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IF = (0x01 << (idx * 4)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntEOCStat() -* 功能说明: 转换完成中断状态 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要查询的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 -* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntEOCStat() +* 功能说明: 转换完成中断状态 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要查询的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t ADC_IntEOCStat(ADC_TypeDef *ADCx, uint32_t chn) @@ -344,11 +344,11 @@ uint32_t ADC_IntEOCStat(ADC_TypeDef *ADCx, uint32_t chn) return (ADCx->IF & (0x01 << (idx * 4))) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntOVFEn() -* 功能说明: 数据溢出中断使能 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntOVFEn() +* 功能说明: 数据溢出中断使能 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -359,11 +359,11 @@ void ADC_IntOVFEn(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IE |= (0x01 << (idx * 4 + 1)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntOVFDis() -* 功能说明: 数据溢出中断禁止 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntOVFDis() +* 功能说明: 数据溢出中断禁止 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -374,11 +374,11 @@ void ADC_IntOVFDis(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IE &= ~(0x01 << (idx * 4 + 1)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntOVFClr() -* 功能说明: 数据溢出中断标志清除 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntOVFClr() +* 功能说明: 数据溢出中断标志清除 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -389,12 +389,12 @@ void ADC_IntOVFClr(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IF = (0x01 << (idx * 4 + 1)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntOVFStat() -* 功能说明: 数据溢出中断状态 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要查询的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 -* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntOVFStat() +* 功能说明: 数据溢出中断状态 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要查询的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t ADC_IntOVFStat(ADC_TypeDef *ADCx, uint32_t chn) @@ -404,11 +404,11 @@ uint32_t ADC_IntOVFStat(ADC_TypeDef *ADCx, uint32_t chn) return (ADCx->IF & (0x01 << (idx * 4 + 1))) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntHFULLEn() -* 功能说明: FIFO半满中断使能 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntHFULLEn() +* 功能说明: FIFO半满中断使能 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -419,11 +419,11 @@ void ADC_IntHFULLEn(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IE |= (0x01 << (idx * 4 + 2)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntHFULLDis() -* 功能说明: FIFO半满中断禁止 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntHFULLDis() +* 功能说明: FIFO半满中断禁止 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -434,11 +434,11 @@ void ADC_IntHFULLDis(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IE &= ~(0x01 << (idx * 4 + 2)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntHFULLClr() -* 功能说明: FIFO半满中断标志清除 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntHFULLClr() +* 功能说明: FIFO半满中断标志清除 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -449,12 +449,12 @@ void ADC_IntHFULLClr(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IF = (0x01 << (idx * 4 + 2)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntHFULLStat() -* 功能说明: FIFO半满中断状态 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要查询的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 -* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntHFULLStat() +* 功能说明: FIFO半满中断状态 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要查询的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t ADC_IntHFULLStat(ADC_TypeDef *ADCx, uint32_t chn) @@ -464,11 +464,11 @@ uint32_t ADC_IntHFULLStat(ADC_TypeDef *ADCx, uint32_t chn) return (ADCx->IF & (0x01 << (idx * 4 + 2))) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntFULLEn() -* 功能说明: FIFO满中断使能 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntFULLEn() +* 功能说明: FIFO满中断使能 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -479,11 +479,11 @@ void ADC_IntFULLEn(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IE |= (0x01 << (idx * 4 + 3)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntFULLDis() -* 功能说明: FIFO满中断禁止 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntFULLDis() +* 功能说明: FIFO满中断禁止 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -494,11 +494,11 @@ void ADC_IntFULLDis(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IE &= ~(0x01 << (idx * 4 + 3)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntFULLClr() -* 功能说明: FIFO满中断标志清除 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntFULLClr() +* 功能说明: FIFO满中断标志清除 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要设置的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -509,12 +509,12 @@ void ADC_IntFULLClr(ADC_TypeDef *ADCx, uint32_t chn) ADCx->IF = (0x01 << (idx * 4 + 3)); } -/****************************************************************************************************************************************** -* 函数名称: ADC_IntFULLStat() -* 功能说明: FIFO满中断状态 -* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC -* uint32_t chn 要查询的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 -* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 +/****************************************************************************************************************************************** +* 函数名称: ADC_IntFULLStat() +* 功能说明: FIFO满中断状态 +* 输 入: ADC_TypeDef * ADCx 指定要被设置的ADC，可取值包括ADC +* uint32_t chn 要查询的通道，有效值ADC_CH0、ADC_CH1、... ... 、ADC_CH7 +* 输 出: uint32_t 1 该通道完成了转换 0 该通道未完成转换 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t ADC_IntFULLStat(ADC_TypeDef *ADCx, uint32_t chn) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_can.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_can.c index f1f7a36ba7..85d1a81d07 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_can.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_can.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_can.c -* 功能说明: SWM320单片机的CAN模块驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 -* 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 功能说明: SWM320单片机的CAN模块驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -21,11 +21,11 @@ #include "SWM320.h" #include "SWM320_can.h" -/****************************************************************************************************************************************** -* 函数名称: CAN_Init() -* 功能说明: CAN接口初始化 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* CAN_InitStructure * initStruct 包含CAN接口相关设定值的结构体 +/****************************************************************************************************************************************** +* 函数名称: CAN_Init() +* 功能说明: CAN接口初始化 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* CAN_InitStructure * initStruct 包含CAN接口相关设定值的结构体 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -84,10 +84,10 @@ void CAN_Init(CAN_TypeDef *CANx, CAN_InitStructure *initStruct) } } -/****************************************************************************************************************************************** -* 函数名称: CAN_Open() -* 功能说明: CAN接口打开 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_Open() +* 功能说明: CAN接口打开 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -96,10 +96,10 @@ void CAN_Open(CAN_TypeDef *CANx) CANx->CR &= ~(0x01 << CAN_CR_RST_Pos); //退出复位模式，进入工作模式 } -/****************************************************************************************************************************************** -* 函数名称: CAN_Close() -* 功能说明: CAN接口关闭 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_Close() +* 功能说明: CAN接口关闭 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -108,15 +108,15 @@ void CAN_Close(CAN_TypeDef *CANx) CANx->CR |= (0x01 << CAN_CR_RST_Pos); //进入复位模式，不能发送和接收数据 } -/****************************************************************************************************************************************** -* 函数名称: CAN_Transmit() -* 功能说明: CAN发送数据 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* uint32_t format CAN_FRAME_STD 标准帧 CAN_FRAME_EXT 扩展帧 -* uint32_t id 消息ID -* uint8_t data[] 要发送的数据 -* uint32_t size 要发送的数据的个数 -* uint32_t once 只发送一次，即使发送失败（仲裁丢失、发送出错、NAK）也不尝试重发 +/****************************************************************************************************************************************** +* 函数名称: CAN_Transmit() +* 功能说明: CAN发送数据 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* uint32_t format CAN_FRAME_STD 标准帧 CAN_FRAME_EXT 扩展帧 +* uint32_t id 消息ID +* uint8_t data[] 要发送的数据 +* uint32_t size 要发送的数据的个数 +* uint32_t once 只发送一次，即使发送失败（仲裁丢失、发送出错、NAK）也不尝试重发 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -126,32 +126,32 @@ void CAN_Transmit(CAN_TypeDef *CANx, uint32_t format, uint32_t id, uint8_t data[ if (format == CAN_FRAME_STD) { - CANx->TXFRAME.INFO = (0 << CAN_INFO_FF_Pos) | - (0 << CAN_INFO_RTR_Pos) | - (size << CAN_INFO_DLC_Pos); + CANx->FRAME.INFO = (0 << CAN_INFO_FF_Pos) | + (0 << CAN_INFO_RTR_Pos) | + (size << CAN_INFO_DLC_Pos); - CANx->TXFRAME.DATA[0] = id >> 3; - CANx->TXFRAME.DATA[1] = id << 5; + CANx->FRAME.DATA[0] = id >> 3; + CANx->FRAME.DATA[1] = id << 5; for (i = 0; i < size; i++) { - CANx->TXFRAME.DATA[i + 2] = data[i]; + CANx->FRAME.DATA[i + 2] = data[i]; } } else //if(format == CAN_FRAME_EXT) { - CANx->TXFRAME.INFO = (1 << CAN_INFO_FF_Pos) | - (0 << CAN_INFO_RTR_Pos) | - (size << CAN_INFO_DLC_Pos); + CANx->FRAME.INFO = (1 << CAN_INFO_FF_Pos) | + (0 << CAN_INFO_RTR_Pos) | + (size << CAN_INFO_DLC_Pos); - CANx->TXFRAME.DATA[0] = id >> 21; - CANx->TXFRAME.DATA[1] = id >> 13; - CANx->TXFRAME.DATA[2] = id >> 5; - CANx->TXFRAME.DATA[3] = id << 3; + CANx->FRAME.DATA[0] = id >> 21; + CANx->FRAME.DATA[1] = id >> 13; + CANx->FRAME.DATA[2] = id >> 5; + CANx->FRAME.DATA[3] = id << 3; for (i = 0; i < size; i++) { - CANx->TXFRAME.DATA[i + 4] = data[i]; + CANx->FRAME.DATA[i + 4] = data[i]; } } @@ -172,13 +172,13 @@ void CAN_Transmit(CAN_TypeDef *CANx, uint32_t format, uint32_t id, uint8_t data[ } } -/****************************************************************************************************************************************** -* 函数名称: CAN_TransmitRequest() -* 功能说明: CAN发送远程请求，请求远程节点发送数据 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* uint32_t format CAN_FRAME_STD 标准帧 CAN_FRAME_EXT 扩展帧 -* uint32_t id 消息ID -* uint32_t once 只发送一次，即使发送失败（仲裁丢失、发送出错、NAK）也不尝试重发 +/****************************************************************************************************************************************** +* 函数名称: CAN_TransmitRequest() +* 功能说明: CAN发送远程请求，请求远程节点发送数据 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* uint32_t format CAN_FRAME_STD 标准帧 CAN_FRAME_EXT 扩展帧 +* uint32_t id 消息ID +* uint32_t once 只发送一次，即使发送失败（仲裁丢失、发送出错、NAK）也不尝试重发 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -186,23 +186,23 @@ void CAN_TransmitRequest(CAN_TypeDef *CANx, uint32_t format, uint32_t id, uint32 { if (format == CAN_FRAME_STD) { - CANx->TXFRAME.INFO = (0 << CAN_INFO_FF_Pos) | - (1 << CAN_INFO_RTR_Pos) | - (0 << CAN_INFO_DLC_Pos); + CANx->FRAME.INFO = (0 << CAN_INFO_FF_Pos) | + (1 << CAN_INFO_RTR_Pos) | + (0 << CAN_INFO_DLC_Pos); - CANx->TXFRAME.DATA[0] = id >> 3; - CANx->TXFRAME.DATA[1] = id << 5; + CANx->FRAME.DATA[0] = id >> 3; + CANx->FRAME.DATA[1] = id << 5; } else //if(format == CAN_FRAME_EXT) { - CANx->TXFRAME.INFO = (1 << CAN_INFO_FF_Pos) | - (1 << CAN_INFO_RTR_Pos) | - (0 << CAN_INFO_DLC_Pos); + CANx->FRAME.INFO = (1 << CAN_INFO_FF_Pos) | + (1 << CAN_INFO_RTR_Pos) | + (0 << CAN_INFO_DLC_Pos); - CANx->TXFRAME.DATA[0] = id >> 21; - CANx->TXFRAME.DATA[1] = id >> 13; - CANx->TXFRAME.DATA[2] = id >> 5; - CANx->TXFRAME.DATA[3] = id << 3; + CANx->FRAME.DATA[0] = id >> 21; + CANx->FRAME.DATA[1] = id >> 13; + CANx->FRAME.DATA[2] = id >> 5; + CANx->FRAME.DATA[3] = id << 3; } if (once == 0) @@ -215,49 +215,49 @@ void CAN_TransmitRequest(CAN_TypeDef *CANx, uint32_t format, uint32_t id, uint32 } } -/****************************************************************************************************************************************** -* 函数名称: CAN_Receive() -* 功能说明: CAN接收数据 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* CAN_RXMessage *msg 接收到的消息存储在此结构体变量中 +/****************************************************************************************************************************************** +* 函数名称: CAN_Receive() +* 功能说明: CAN接收数据 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* CAN_RXMessage *msg 接收到的消息存储在此结构体变量中 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ void CAN_Receive(CAN_TypeDef *CANx, CAN_RXMessage *msg) { uint32_t i; - msg->format = (CANx->RXFRAME.INFO & CAN_INFO_FF_Msk) >> CAN_INFO_FF_Pos; + msg->format = (CANx->FRAME.INFO & CAN_INFO_FF_Msk) >> CAN_INFO_FF_Pos; - msg->remote = (CANx->RXFRAME.INFO & CAN_INFO_RTR_Msk) >> CAN_INFO_RTR_Pos; - msg->size = (CANx->RXFRAME.INFO & CAN_INFO_DLC_Msk) >> CAN_INFO_DLC_Pos; + msg->remote = (CANx->FRAME.INFO & CAN_INFO_RTR_Msk) >> CAN_INFO_RTR_Pos; + msg->size = (CANx->FRAME.INFO & CAN_INFO_DLC_Msk) >> CAN_INFO_DLC_Pos; if (msg->format == CAN_FRAME_STD) { - msg->id = (CANx->RXFRAME.DATA[0] << 3) | (CANx->RXFRAME.DATA[1] >> 5); + msg->id = (CANx->FRAME.DATA[0] << 3) | (CANx->FRAME.DATA[1] >> 5); for (i = 0; i < msg->size; i++) { - msg->data[i] = CANx->RXFRAME.DATA[i + 2]; + msg->data[i] = CANx->FRAME.DATA[i + 2]; } } else //if(msg->format == CAN_FRAME_EXT) { - msg->id = (CANx->RXFRAME.DATA[0] << 21) | (CANx->RXFRAME.DATA[1] << 13) | (CANx->RXFRAME.DATA[2] << 5) | (CANx->RXFRAME.DATA[3] >> 3); + msg->id = (CANx->FRAME.DATA[0] << 21) | (CANx->FRAME.DATA[1] << 13) | (CANx->FRAME.DATA[2] << 5) | (CANx->FRAME.DATA[3] >> 3); for (i = 0; i < msg->size; i++) { - msg->data[i] = CANx->RXFRAME.DATA[i + 4]; + msg->data[i] = CANx->FRAME.DATA[i + 4]; } } CANx->CMD = (1 << CAN_CMD_RRB_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_TXComplete() -* 功能说明: 发送是否完成 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* 输 出: uint32_t 1 已经完成 0 还未完成 +/****************************************************************************************************************************************** +* 函数名称: CAN_TXComplete() +* 功能说明: 发送是否完成 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* 输 出: uint32_t 1 已经完成 0 还未完成 * 注意事项: 发送被Abort也会触发发送完成，但不会触发发送成功 ******************************************************************************************************************************************/ uint32_t CAN_TXComplete(CAN_TypeDef *CANx) @@ -265,11 +265,11 @@ uint32_t CAN_TXComplete(CAN_TypeDef *CANx) return (CANx->SR & CAN_SR_TXBR_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: CAN_TXSuccess() -* 功能说明: 发送是否成功 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* 输 出: uint32_t 1 发送成功 0 发送失败 +/****************************************************************************************************************************************** +* 函数名称: CAN_TXSuccess() +* 功能说明: 发送是否成功 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* 输 出: uint32_t 1 发送成功 0 发送失败 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t CAN_TXSuccess(CAN_TypeDef *CANx) @@ -277,10 +277,10 @@ uint32_t CAN_TXSuccess(CAN_TypeDef *CANx) return (CANx->SR & CAN_SR_TXOK_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: CAN_AbortTransmit() -* 功能说明: 终止发送 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_AbortTransmit() +* 功能说明: 终止发送 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 正在进行的发送无法终止，但执行此命令后若发送失败不会再重发 ******************************************************************************************************************************************/ @@ -289,11 +289,11 @@ void CAN_AbortTransmit(CAN_TypeDef *CANx) CANx->CMD = (1 << CAN_CMD_ABTTX_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_TXBufferReady() -* 功能说明: TX Buffer是否准备好可以写入消息 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* 输 出: uint32_t 1 已准备好 0 未准备好 +/****************************************************************************************************************************************** +* 函数名称: CAN_TXBufferReady() +* 功能说明: TX Buffer是否准备好可以写入消息 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* 输 出: uint32_t 1 已准备好 0 未准备好 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t CAN_TXBufferReady(CAN_TypeDef *CANx) @@ -301,11 +301,11 @@ uint32_t CAN_TXBufferReady(CAN_TypeDef *CANx) return (CANx->SR & CAN_SR_TXBR_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: CAN_RXDataAvailable() -* 功能说明: RX FIFO中是否有数据可读出 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* 输 出: uint32_t 1 有数据可读出 0 没有数据 +/****************************************************************************************************************************************** +* 函数名称: CAN_RXDataAvailable() +* 功能说明: RX FIFO中是否有数据可读出 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* 输 出: uint32_t 1 有数据可读出 0 没有数据 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t CAN_RXDataAvailable(CAN_TypeDef *CANx) @@ -313,14 +313,14 @@ uint32_t CAN_RXDataAvailable(CAN_TypeDef *CANx) return (CANx->SR & CAN_SR_RXDA_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: CAN_SetBaudrate() -* 功能说明: 设置波特率 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* uint32_t baudrate 波特率，即位传输速率 -* uint32_t CAN_BS1 CAN_BS1_1tq、CAN_BS1_2tq、... ... 、CAN_BS1_16tq -* uint32_t CAN_BS2 CAN_BS2_1tq、CAN_BS2_2tq、... ... 、CAN_BS2_8tq -* uint32_t CAN_SJW CAN_SJW_1tq、CAN_SJW_2tq、CAN_SJW_3tq、CAN_SJW_4tq +/****************************************************************************************************************************************** +* 函数名称: CAN_SetBaudrate() +* 功能说明: 设置波特率 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* uint32_t baudrate 波特率，即位传输速率 +* uint32_t CAN_BS1 CAN_BS1_1tq、CAN_BS1_2tq、... ... 、CAN_BS1_16tq +* uint32_t CAN_BS2 CAN_BS2_1tq、CAN_BS2_2tq、... ... 、CAN_BS2_8tq +* uint32_t CAN_SJW CAN_SJW_1tq、CAN_SJW_2tq、CAN_SJW_3tq、CAN_SJW_4tq * 输 出: 无 * 注意事项: 设置前需要先调用CAN_Close()关闭CAN模块 ******************************************************************************************************************************************/ @@ -334,12 +334,12 @@ void CAN_SetBaudrate(CAN_TypeDef *CANx, uint32_t baudrate, uint32_t CAN_BS1, uin ((SystemCoreClock / 2 / baudrate / (1 + (CAN_BS1 + 1) + (CAN_BS2 + 1)) - 1) << CAN_BT0_BRP_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_SetFilter32b() -* 功能说明: 设置接收滤波器，1个32位滤波器 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* uint32_t check 与mask一起决定了接收到的Message是否是自己需要的：check & (~mask) == ID & (~mask)的Message通过过滤 -* uint32_t mask +/****************************************************************************************************************************************** +* 函数名称: CAN_SetFilter32b() +* 功能说明: 设置接收滤波器，1个32位滤波器 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* uint32_t check 与mask一起决定了接收到的Message是否是自己需要的：check & (~mask) == ID & (~mask)的Message通过过滤 +* uint32_t mask * 输 出: 无 * 注意事项: 设置前需要先调用CAN_Close()关闭CAN模块 ******************************************************************************************************************************************/ @@ -359,14 +359,14 @@ void CAN_SetFilter32b(CAN_TypeDef *CANx, uint32_t check, uint32_t mask) CANx->FILTER.ACR[0] = (check >> 24) & 0xFF; } -/****************************************************************************************************************************************** -* 函数名称: CAN_SetFilter16b() -* 功能说明: 设置接收滤波器，2个16位滤波器 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* uint16_t check1 与mask一起决定了接收到的Message是否是自己需要的：check & (~mask) == ID & (~mask)的Message通过过滤 -* uint16_t mask1 -* uint16_t check2 -* uint16_t mask2 +/****************************************************************************************************************************************** +* 函数名称: CAN_SetFilter16b() +* 功能说明: 设置接收滤波器，2个16位滤波器 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* uint16_t check1 与mask一起决定了接收到的Message是否是自己需要的：check & (~mask) == ID & (~mask)的Message通过过滤 +* uint16_t mask1 +* uint16_t check2 +* uint16_t mask2 * 输 出: 无 * 注意事项: 设置前需要先调用CAN_Close()关闭CAN模块 ******************************************************************************************************************************************/ @@ -386,10 +386,10 @@ void CAN_SetFilter16b(CAN_TypeDef *CANx, uint16_t check1, uint16_t mask1, uint16 CANx->FILTER.ACR[0] = (check2 >> 8) & 0xFF; } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTRXNotEmptyEn() -* 功能说明: 当RX FIFO中有数据时（非空）触发中断使能 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTRXNotEmptyEn() +* 功能说明: 当RX FIFO中有数据时（非空）触发中断使能 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -398,10 +398,10 @@ void CAN_INTRXNotEmptyEn(CAN_TypeDef *CANx) CANx->IE |= (1 << CAN_IE_RXDA_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTRXNotEmptyDis() -* 功能说明: 当RX FIFO中有数据时（非空）触发中断禁止 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTRXNotEmptyDis() +* 功能说明: 当RX FIFO中有数据时（非空）触发中断禁止 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -410,10 +410,10 @@ void CAN_INTRXNotEmptyDis(CAN_TypeDef *CANx) CANx->IE &= ~(1 << CAN_IE_RXDA_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTTXBufEmptyEn() -* 功能说明: 当TX Buffer空时触发中断使能 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTTXBufEmptyEn() +* 功能说明: 当TX Buffer空时触发中断使能 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -422,10 +422,10 @@ void CAN_INTTXBufEmptyEn(CAN_TypeDef *CANx) CANx->IE |= (1 << CAN_IE_TXBR_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTTXBufEmptyDis() -* 功能说明: 当TX Buffer空时触发中断禁止 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTTXBufEmptyDis() +* 功能说明: 当TX Buffer空时触发中断禁止 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -434,10 +434,10 @@ void CAN_INTTXBufEmptyDis(CAN_TypeDef *CANx) CANx->IE &= ~(1 << CAN_IE_TXBR_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTErrWarningEn() -* 功能说明: TXERR/RXERR计数值达到Error Warning Limit时触发中断使能 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTErrWarningEn() +* 功能说明: TXERR/RXERR计数值达到Error Warning Limit时触发中断使能 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -446,10 +446,10 @@ void CAN_INTErrWarningEn(CAN_TypeDef *CANx) CANx->IE |= (1 << CAN_IE_ERRWARN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTErrWarningDis() -* 功能说明: TXERR/RXERR计数值达到Error Warning Limit时触发中断禁止 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTErrWarningDis() +* 功能说明: TXERR/RXERR计数值达到Error Warning Limit时触发中断禁止 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -458,10 +458,10 @@ void CAN_INTErrWarningDis(CAN_TypeDef *CANx) CANx->IE &= ~(1 << CAN_IE_ERRWARN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTRXOverflowEn() -* 功能说明: RX FIFO 溢出时触发中断使能 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTRXOverflowEn() +* 功能说明: RX FIFO 溢出时触发中断使能 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -470,10 +470,10 @@ void CAN_INTRXOverflowEn(CAN_TypeDef *CANx) CANx->IE |= (1 << CAN_IE_RXOV_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTRXOverflowDis() -* 功能说明: RX FIFO 溢出时触发中断禁止 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTRXOverflowDis() +* 功能说明: RX FIFO 溢出时触发中断禁止 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -482,10 +482,10 @@ void CAN_INTRXOverflowDis(CAN_TypeDef *CANx) CANx->IE &= ~(1 << CAN_IE_RXOV_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTRXOverflowClear() -* 功能说明: RX FIFO 溢出中断清除 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTRXOverflowClear() +* 功能说明: RX FIFO 溢出中断清除 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -494,10 +494,10 @@ void CAN_INTRXOverflowClear(CAN_TypeDef *CANx) CANx->CMD = (1 << CAN_CMD_CLROV_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTWakeupEn() -* 功能说明: 唤醒事件触发中断使能 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTWakeupEn() +* 功能说明: 唤醒事件触发中断使能 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -506,10 +506,10 @@ void CAN_INTWakeupEn(CAN_TypeDef *CANx) CANx->IE |= (1 << CAN_IE_WKUP_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTWakeupDis() -* 功能说明: 唤醒事件触发中断禁止 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTWakeupDis() +* 功能说明: 唤醒事件触发中断禁止 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -518,10 +518,10 @@ void CAN_INTWakeupDis(CAN_TypeDef *CANx) CANx->IE &= ~(1 << CAN_IE_WKUP_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTErrPassiveEn() -* 功能说明: TXERR/RXERR计数值达到127时中断使能 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTErrPassiveEn() +* 功能说明: TXERR/RXERR计数值达到127时中断使能 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -530,10 +530,10 @@ void CAN_INTErrPassiveEn(CAN_TypeDef *CANx) CANx->IE |= (1 << CAN_IE_ERRPASS_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTErrPassiveDis() -* 功能说明: TXERR/RXERR计数值达到127时中断禁止 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTErrPassiveDis() +* 功能说明: TXERR/RXERR计数值达到127时中断禁止 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -542,10 +542,10 @@ void CAN_INTErrPassiveDis(CAN_TypeDef *CANx) CANx->IE &= ~(1 << CAN_IE_ERRPASS_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTArbitrLostEn() -* 功能说明: 仲裁失败中断使能 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTArbitrLostEn() +* 功能说明: 仲裁失败中断使能 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -554,10 +554,10 @@ void CAN_INTArbitrLostEn(CAN_TypeDef *CANx) CANx->IE |= (1 << CAN_IE_ARBLOST_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTArbitrLostDis() -* 功能说明: 仲裁失败中断禁止 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTArbitrLostDis() +* 功能说明: 仲裁失败中断禁止 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -566,10 +566,10 @@ void CAN_INTArbitrLostDis(CAN_TypeDef *CANx) CANx->IE &= ~(1 << CAN_IE_ARBLOST_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTBusErrorEn() -* 功能说明: 总线错误中断使能 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTBusErrorEn() +* 功能说明: 总线错误中断使能 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -578,10 +578,10 @@ void CAN_INTBusErrorEn(CAN_TypeDef *CANx) CANx->IE |= (1 << CAN_IE_BUSERR_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTBusErrorDis() -* 功能说明: 总线错误中断禁止 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +/****************************************************************************************************************************************** +* 函数名称: CAN_INTBusErrorDis() +* 功能说明: 总线错误中断禁止 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -590,11 +590,11 @@ void CAN_INTBusErrorDis(CAN_TypeDef *CANx) CANx->IE &= ~(1 << CAN_IE_BUSERR_Pos); } -/****************************************************************************************************************************************** -* 函数名称: CAN_INTStat() -* 功能说明: 查询中断状态 -* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN -* 输 出: uint32_t 当前中断状态 +/****************************************************************************************************************************************** +* 函数名称: CAN_INTStat() +* 功能说明: 查询中断状态 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口，有效值包括CAN +* 输 出: uint32_t 当前中断状态 * 注意事项: CANx->IF读取清零，因此在中断ISR中只能读取一次，不能多次读取 ******************************************************************************************************************************************/ uint32_t CAN_INTStat(CAN_TypeDef *CANx) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_crc.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_crc.c index d07cd28689..1255d3093e 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_crc.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_crc.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_crc.c -* 功能说明: SWM320单片机的CRC模块驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 -* 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 功能说明: SWM320单片机的CRC模块驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -21,14 +21,14 @@ #include "SWM320.h" #include "SWM320_crc.h" -/****************************************************************************************************************************************** -* 函数名称: CRC_Init() -* 功能说明: CRC 初始化 -* 输 入: CRC_TypeDef * CRCx 指定要被设置的CRC接口，有效值包括CRC -* uint32_t mode 工作模式，有效值有：CRC32_IN32、CRC32_IN16、CRC32_IN8、CRC16_IN16、CRC16_IN8 -* uint32_t out_not 输出结果是否取反 -* uint32_t out_rev 输出结果是否翻转 -* uint32_t ini_val CRC初始值 +/****************************************************************************************************************************************** +* 函数名称: CRC_Init() +* 功能说明: CRC 初始化 +* 输 入: CRC_TypeDef * CRCx 指定要被设置的CRC接口，有效值包括CRC +* uint32_t mode 工作模式，有效值有：CRC32_IN32、CRC32_IN16、CRC32_IN8、CRC16_IN16、CRC16_IN8 +* uint32_t out_not 输出结果是否取反 +* uint32_t out_rev 输出结果是否翻转 +* uint32_t ini_val CRC初始值 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_crc.h b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_crc.h index 639db18cd0..54de1301b2 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_crc.h +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_crc.h @@ -9,10 +9,10 @@ void CRC_Init(CRC_TypeDef *CRCx, uint32_t mode, uint32_t out_not, uint32_t out_rev, uint32_t ini_val); -/****************************************************************************************************************************************** -* 函数名称: CRC_Write() -* 功能说明: CRC写入数据 -* 输 入: uint32_t data 要写入的数据 +/****************************************************************************************************************************************** +* 函数名称: CRC_Write() +* 功能说明: CRC写入数据 +* 输 入: uint32_t data 要写入的数据 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -21,11 +21,11 @@ static __INLINE void CRC_Write(uint32_t data) CRC->DATAIN = data; } -/****************************************************************************************************************************************** -* 函数名称: CRC_Result() -* 功能说明: 获取CRC计算结果 +/****************************************************************************************************************************************** +* 函数名称: CRC_Result() +* 功能说明: 获取CRC计算结果 * 输 入: 无 -* 输 出: uint32_t CRC 计算结果 +* 输 出: uint32_t CRC 计算结果 * 注意事项: 无 ******************************************************************************************************************************************/ static __INLINE uint32_t CRC_Result(void) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_dma.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_dma.c index b52e8b5f39..70e7ac559b 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_dma.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_dma.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_dma.c -* 功能说明: SWM320单片机的DMA功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 -* 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 功能说明: SWM320单片机的DMA功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -21,16 +21,16 @@ #include "SWM320.h" #include "SWM320_dma.h" -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: DMA_CHM_Config() -* 功能说明: DMA通道配置，用于存储器间（如Flash和RAM间）搬运数据 -* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 -* uint32_t src_addr 源地址，必须字对齐，即地址的最低2位必须是00 -* uint32_t src_addr_incr 0 固定地址 1 地址递增 -* uint32_t dst_addr 目的地址，必须字对齐，即地址的最低2位必须是00 -* uint32_t dst_addr_incr 0 固定地址 1 地址递增 -* uint32_t num_word 要搬运的数据字数，最大1024 -* uint32_t int_en 中断使能，1 数据搬运完成后产生中断 0 数据搬运完成后不产生中断 +* 功能说明: DMA通道配置，用于存储器间（如Flash和RAM间）搬运数据 +* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 +* uint32_t src_addr 源地址，必须字对齐，即地址的最低2位必须是00 +* uint32_t src_addr_incr 0 固定地址 1 地址递增 +* uint32_t dst_addr 目的地址，必须字对齐，即地址的最低2位必须是00 +* uint32_t dst_addr_incr 0 固定地址 1 地址递增 +* uint32_t num_word 要搬运的数据字数，最大1024 +* uint32_t int_en 中断使能，1 数据搬运完成后产生中断 0 数据搬运完成后不产生中断 * 输 出: 无 * 注意事项: 搬运数据量以字为单元，不是字节 ******************************************************************************************************************************************/ @@ -67,10 +67,10 @@ void DMA_CHM_Config(uint32_t chn, uint32_t src_addr, uint32_t src_addr_incr, uin } } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: DMA_CH_Open() -* 功能说明: DMA通道打开 -* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 +* 功能说明: DMA通道打开 +* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -79,10 +79,10 @@ void DMA_CH_Open(uint32_t chn) DMA->CH[chn].CR |= (1 << DMA_CR_TXEN_Pos); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: DMA_CH_Close() -* 功能说明: DMA通道关闭 -* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 +* 功能说明: DMA通道关闭 +* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -91,10 +91,10 @@ void DMA_CH_Close(uint32_t chn) DMA->CH[chn].CR &= ~(1 << DMA_CR_TXEN_Pos); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: DMA_CH_INTEn() -* 功能说明: DMA中断使能，数据搬运完成后触发中断 -* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 +* 功能说明: DMA中断使能，数据搬运完成后触发中断 +* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -103,10 +103,10 @@ void DMA_CH_INTEn(uint32_t chn) DMA->IM &= ~(1 << chn); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: DMA_CH_INTDis() -* 功能说明: DMA中断禁止，数据搬运完成后不触发中断 -* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 +* 功能说明: DMA中断禁止，数据搬运完成后不触发中断 +* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -115,10 +115,10 @@ void DMA_CH_INTDis(uint32_t chn) DMA->IM |= (1 << chn); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: DMA_CH_INTClr() -* 功能说明: DMA中断标志清除 -* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 +* 功能说明: DMA中断标志清除 +* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -127,11 +127,11 @@ void DMA_CH_INTClr(uint32_t chn) DMA->IF = (1 << chn); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: DMA_CH_INTStat() -* 功能说明: DMA中断状态查询 -* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 -* 输 出: uint32_t 1 数据搬运完成 0 数据搬运未完成 +* 功能说明: DMA中断状态查询 +* 输 入: uint32_t chn 指定要配置的通道，有效值有DMA_CH0、DMA_CH1、DMA_CH2 +* 输 出: uint32_t 1 数据搬运完成 0 数据搬运未完成 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t DMA_CH_INTStat(uint32_t chn) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_exti.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_exti.c index f4a15e8c2c..6bebc75601 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_exti.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_exti.c @@ -1,34 +1,34 @@ -/****************************************************************************************************************************************** -* 文件名称: SWM320_exti.c -* 功能说明: SWM320单片机的外部中断功能驱动库 +/****************************************************************************************************************************************** +* 文件名称: SWM320_exti.c +* 功能说明: SWM320单片机的外部中断功能驱动库 * 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_exti.h" -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: EXTI_Init() -* 功能说明: 指定引脚外部中断初始化 -* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* uint32_t mode 有效值有EXTI_FALL_EDGE、EXTI_RISE_EDGE、EXTI_BOTH_EDGE、EXTI_LOW_LEVEL、EXTI_HIGH_LEVEL +* 功能说明: 指定引脚外部中断初始化 +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* uint32_t mode 有效值有EXTI_FALL_EDGE、EXTI_RISE_EDGE、EXTI_BOTH_EDGE、EXTI_LOW_LEVEL、EXTI_HIGH_LEVEL * 输 出: 无 * 注意事项: 由于GPIOA、GPIOB、GPIOC、GPIOM的PIN0--7引脚即可以接入NVIC中的引脚中断（如GPIOA0_IRQn），也可以接入NVIC的组中断（GPIOA_IRQn）， -* 所以不在此函数中调用NVIC_EnableIRQ()使能NVIC中断，从而可以根据需要调用NVIC_EnableIRQ(GPIOA0_IRQn)和NVIC_EnableIRQ(GPIOA_IRQn) +* 所以不在此函数中调用NVIC_EnableIRQ()使能NVIC中断，从而可以根据需要调用NVIC_EnableIRQ(GPIOA0_IRQn)和NVIC_EnableIRQ(GPIOA_IRQn) ******************************************************************************************************************************************/ void EXTI_Init(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t mode) { @@ -65,11 +65,11 @@ void EXTI_Init(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t mode) GPIOx->INTCLR = (1 << n); //清除掉因为模式配置可能产生的中断 } -/****************************************************************************************************************************************** -* 函数名称: EXTI_Open() -* 功能说明: 指定引脚外部中断打开（即使能） -* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +/****************************************************************************************************************************************** +* 函数名称: EXTI_Open() +* 功能说明: 指定引脚外部中断打开（即使能） +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -78,11 +78,11 @@ void EXTI_Open(GPIO_TypeDef *GPIOx, uint32_t n) GPIOx->INTEN |= (0x01 << n); } -/****************************************************************************************************************************************** -* 函数名称: EXTI_Close() -* 功能说明: 指定引脚外部中断关闭（即禁能） -* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +/****************************************************************************************************************************************** +* 函数名称: EXTI_Close() +* 功能说明: 指定引脚外部中断关闭（即禁能） +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -91,12 +91,12 @@ void EXTI_Close(GPIO_TypeDef *GPIOx, uint32_t n) GPIOx->INTEN &= ~(0x01 << n); } -/****************************************************************************************************************************************** -* 函数名称: EXTI_State() -* 功能说明: 指定引脚是否触发了中断 -* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* 输 出: uint32_t 1 此引脚触发了中断 0 此引脚未触发中断 +/****************************************************************************************************************************************** +* 函数名称: EXTI_State() +* 功能说明: 指定引脚是否触发了中断 +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* 输 出: uint32_t 1 此引脚触发了中断 0 此引脚未触发中断 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t EXTI_State(GPIO_TypeDef *GPIOx, uint32_t n) @@ -104,12 +104,12 @@ uint32_t EXTI_State(GPIO_TypeDef *GPIOx, uint32_t n) return (GPIOx->INTSTAT >> n) & 0x01; } -/****************************************************************************************************************************************** -* 函数名称: EXTI_RawState() -* 功能说明: 指定引脚是否满足过/了中断触发条件，当此中断关闭时可通过调用此函数以查询的方式检测引脚上是否满足过/了中断触发条件 -* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* 输 出: uint32_t 1 此引脚满足过/了中断触发条件 0 此引脚未满足过/了中断触发条件 +/****************************************************************************************************************************************** +* 函数名称: EXTI_RawState() +* 功能说明: 指定引脚是否满足过/了中断触发条件，当此中断关闭时可通过调用此函数以查询的方式检测引脚上是否满足过/了中断触发条件 +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* 输 出: uint32_t 1 此引脚满足过/了中断触发条件 0 此引脚未满足过/了中断触发条件 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t EXTI_RawState(GPIO_TypeDef *GPIOx, uint32_t n) @@ -117,11 +117,11 @@ uint32_t EXTI_RawState(GPIO_TypeDef *GPIOx, uint32_t n) return (GPIOx->INTRAWSTAT >> n) & 0x01; } -/****************************************************************************************************************************************** -* 函数名称: EXTI_Clear() -* 功能说明: 指定引脚外部中断清除（即清除中断标志，以免再次进入此中断） -* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +/****************************************************************************************************************************************** +* 函数名称: EXTI_Clear() +* 功能说明: 指定引脚外部中断清除（即清除中断标志，以免再次进入此中断） +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定产生外部中断的GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 * 输 出: 无 * 注意事项: 只能清除边沿触发中断的标志，电平触发中断的标志无法清除，只能在引脚电平不符合中断触发条件后硬件自动清除 ******************************************************************************************************************************************/ diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_flash.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_flash.c index 0d2b19812f..6cb6e125d4 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_flash.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_flash.c @@ -1,20 +1,20 @@ -/****************************************************************************************************************************************** -* 文件名称: SWM320_flash.c -* 功能说明: 使用芯片的IAP功能将片上Flash模拟成EEPROM来保存数据，掉电后不丢失 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +/****************************************************************************************************************************************** +* 文件名称: SWM320_flash.c +* 功能说明: 使用芯片的IAP功能将片上Flash模拟成EEPROM来保存数据，掉电后不丢失 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_flash.h" @@ -24,10 +24,10 @@ IAP_Flash_Param_t IAP_Flash_Param = (IAP_Flash_Param_t)0x11000681; IAP_Flash_Erase_t IAP_Flash_Erase = (IAP_Flash_Erase_t)0x11000781; IAP_Flash_Write_t IAP_Flash_Write = (IAP_Flash_Write_t)0x11000801; -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: FLASH_Erase() -* 功能说明: 片内Flash擦除 -* 输 入: uint32_t addr 擦除地址，扇区大小为4K Byte +* 功能说明: 片内Flash擦除 +* 输 入: uint32_t addr 擦除地址，扇区大小为4K Byte * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -42,12 +42,12 @@ void FLASH_Erase(uint32_t addr) __enable_irq(); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: FLASH_Write() -* 功能说明: 片内Flash写入 -* 输 入: uint32_t addr 写入地址 -* uint32_t buff[] 要写入的数据 -* uint32_t count 要写入数据的个数，以字为单位，且必须是4的整数倍，即最少写入4个字 +* 功能说明: 片内Flash写入 +* 输 入: uint32_t addr 写入地址 +* uint32_t buff[] 要写入的数据 +* uint32_t count 要写入数据的个数，以字为单位，且必须是4的整数倍，即最少写入4个字 * 输 出: 无 * 注意事项: 写入数据个数必须是4的整数倍，即最少写入4个字 ******************************************************************************************************************************************/ @@ -62,10 +62,10 @@ void FLASH_Write(uint32_t addr, uint32_t buff[], uint32_t count) __enable_irq(); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: Flash_Param_at_xMHz() -* 功能说明: 将Flash参数设置成xMHz主频下运行时所需的参数 -* 输 入: uint32_t x 可取值 +* 功能说明: 将Flash参数设置成xMHz主频下运行时所需的参数 +* 输 入: uint32_t x 可取值 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_gpio.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_gpio.c index 29c10c132f..5ec03c48f6 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_gpio.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_gpio.c @@ -1,34 +1,34 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_gpio.c -* 功能说明: SWM320单片机的通用输入输出功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 功能说明: SWM320单片机的通用输入输出功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_gpio.h" -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: GPIO_Init() -* 功能说明: 引脚初始化，包含引脚方向、上拉电阻、下拉电阻、开漏输出 -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* uint32_t dir 引脚方向，0 输入 1 输出 -* uint32_t pull_up 上拉电阻，0 关闭上拉 1 开启上拉 -* uint32_t pull_down 下拉电阻，0 关闭下拉 1 开启下拉 +* 功能说明: 引脚初始化，包含引脚方向、上拉电阻、下拉电阻 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* uint32_t dir 引脚方向，0 输入 1 输出 +* uint32_t pull_up 上拉电阻，0 关闭上拉 1 开启上拉 +* uint32_t pull_down 下拉电阻，0 关闭下拉 1 开启下拉 * 输 出: 无 * 注意事项: GPIOA、GPIOC、GPIOM、GPIOP只有上拉，GPIOB、GPION只有下拉（PN0、PN1、PN2三个引脚有上拉没下拉） ******************************************************************************************************************************************/ @@ -152,11 +152,11 @@ void GPIO_Init(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t dir, uint32_t pull_up, } } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: GPIO_SetBit() -* 功能说明: 将参数指定的引脚电平置高 -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* 功能说明: 将参数指定的引脚电平置高 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -165,11 +165,11 @@ void GPIO_SetBit(GPIO_TypeDef *GPIOx, uint32_t n) GPIOx->DATA |= (0x01 << n); } -/****************************************************************************************************************************************** -* 函数名称: GPIO_ClrBit() -* 功能说明: 将参数指定的引脚电平置低 -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +/****************************************************************************************************************************************** +* 函数名称: GPIO_ClrBit() +* 功能说明: 将参数指定的引脚电平置低 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -178,11 +178,11 @@ void GPIO_ClrBit(GPIO_TypeDef *GPIOx, uint32_t n) GPIOx->DATA &= ~(0x01 << n); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: GPIO_InvBit() -* 功能说明: 将参数指定的引脚电平反转 -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* 功能说明: 将参数指定的引脚电平反转 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -191,12 +191,12 @@ void GPIO_InvBit(GPIO_TypeDef *GPIOx, uint32_t n) GPIOx->DATA ^= (0x01 << n); } -/****************************************************************************************************************************************** -* 函数名称: GPIO_GetBit() -* 功能说明: 读取参数指定的引脚的电平状态 -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* 输 出: 参数指定的引脚的电平状态 0 低电平 1 高电平 +/****************************************************************************************************************************************** +* 函数名称: GPIO_GetBit() +* 功能说明: 读取参数指定的引脚的电平状态 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* 输 出: 参数指定的引脚的电平状态 0 低电平 1 高电平 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t GPIO_GetBit(GPIO_TypeDef *GPIOx, uint32_t n) @@ -204,12 +204,12 @@ uint32_t GPIO_GetBit(GPIO_TypeDef *GPIOx, uint32_t n) return ((GPIOx->DATA >> n) & 0x01); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: GPIO_SetBits() * 功能说明: 将参数指定的从n开始的w位连续引脚的电平置高 -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* uint32_t w 指定要将引脚电平置高的引脚的个数 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* uint32_t w 指定要将引脚电平置高的引脚的个数 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -222,12 +222,12 @@ void GPIO_SetBits(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t w) GPIOx->DATA |= (bits << n); } -/****************************************************************************************************************************************** -* 函数名称: GPIO_ClrBits() +/****************************************************************************************************************************************** +* 函数名称: GPIO_ClrBits() * 功能说明: 将参数指定的从n开始的w位连续引脚的电平置低 -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* uint32_t w 指定要将引脚电平置低的引脚的个数 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* uint32_t w 指定要将引脚电平置低的引脚的个数 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -240,12 +240,12 @@ void GPIO_ClrBits(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t w) GPIOx->DATA &= ~(bits << n); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: GPIO_InvBits() * 功能说明: 将参数指定的从n开始的w位连续引脚的电平反转 -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* uint32_t w 指定要将引脚电平反转的引脚的个数 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* uint32_t w 指定要将引脚电平反转的引脚的个数 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -258,14 +258,14 @@ void GPIO_InvBits(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t w) GPIOx->DATA ^= (bits << n); } -/****************************************************************************************************************************************** -* 函数名称: GPIO_GetBits() +/****************************************************************************************************************************************** +* 函数名称: GPIO_GetBits() * 功能说明: 读取参数指定的从n开始的w位连续引脚的电平状态 -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* uint32_t w 指定要将引脚电平置高的引脚的个数 -* 输 出: 参数指定的从n开始的w位连续引脚的电平状态 0 低电平 1 高电平 -* 返回值的第0位表示引脚n的电平状态、返回值的第1位表示引脚n+1的电平状态... ...返回值的第w位表示引脚n+w的电平状态 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* uint32_t w 指定要将引脚电平置高的引脚的个数 +* 输 出: 参数指定的从n开始的w位连续引脚的电平状态 0 低电平 1 高电平 +* 返回值的第0位表示引脚n的电平状态、返回值的第1位表示引脚n+1的电平状态... ...返回值的第w位表示引脚n+w的电平状态 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t GPIO_GetBits(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t w) @@ -277,11 +277,11 @@ uint32_t GPIO_GetBits(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t w) return ((GPIOx->DATA >> n) & bits); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: GPIO_AtomicSetBit() -* 功能说明: 将参数指定的引脚电平置高，确保引脚”读-改-写“操作的原子性（不被中断ISR打断） -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 功能说明: 将参数指定的引脚电平置高，确保引脚”读-改-写“操作的原子性（不被中断ISR打断） +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 * 输 出: 无 * 注意事项: 当GPIOx的16个引脚中，有些在主循环中操作，有些在中断ISR中操作时，GPIOx的引脚必须都用GPIO_Atomic类型函数操作 ******************************************************************************************************************************************/ @@ -290,11 +290,11 @@ void GPIO_AtomicSetBit(GPIO_TypeDef *GPIOx, uint32_t n) *((volatile uint32_t *)(0x42000000 + ((uint32_t)&GPIOx->DATA - 0x40000000) * 32 + n * 4)) = 1; } -/****************************************************************************************************************************************** -* 函数名称: GPIO_AtomicClrBit() -* 功能说明: 将参数指定的引脚电平置低，确保引脚”读-改-写“操作的原子性（不被中断ISR打断） -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +/****************************************************************************************************************************************** +* 函数名称: GPIO_AtomicClrBit() +* 功能说明: 将参数指定的引脚电平置低，确保引脚”读-改-写“操作的原子性（不被中断ISR打断） +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 * 输 出: 无 * 注意事项: 当GPIOx的16个引脚中，有些在主循环中操作，有些在中断ISR中操作时，GPIOx的引脚必须都用GPIO_Atomic类型函数操作 ******************************************************************************************************************************************/ @@ -303,11 +303,11 @@ void GPIO_AtomicClrBit(GPIO_TypeDef *GPIOx, uint32_t n) *((volatile uint32_t *)(0x42000000 + ((uint32_t)&GPIOx->DATA - 0x40000000) * 32 + n * 4)) = 0; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: GPIO_AtomicInvBit() -* 功能说明: 将参数指定的引脚电平反转，确保引脚”读-改-写“操作的原子性（不被中断ISR打断） -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 功能说明: 将参数指定的引脚电平反转，确保引脚”读-改-写“操作的原子性（不被中断ISR打断） +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 * 输 出: 无 * 注意事项: 当GPIOx的16个引脚中，有些在主循环中操作，有些在中断ISR中操作时，GPIOx的引脚必须都用GPIO_Atomic类型函数操作 ******************************************************************************************************************************************/ @@ -316,12 +316,12 @@ void GPIO_AtomicInvBit(GPIO_TypeDef *GPIOx, uint32_t n) *((volatile uint32_t *)(0x42000000 + ((uint32_t)&GPIOx->DATA - 0x40000000) * 32 + n * 4)) = 1 - *((volatile uint32_t *)(0x42000000 + ((uint32_t)&GPIOx->DATA - 0x40000000) * 32 + n * 4)); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: GPIO_AtomicSetBits() * 功能说明: 将参数指定的从n开始的w位连续引脚的电平置高，确保引脚”读-改-写“操作的原子性（不被中断ISR打断） -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 -* uint32_t w 指定要将引脚电平置高的引脚的个数 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平置高的引脚的个数 * 输 出: 无 * 注意事项: 当GPIOx的16个引脚中，有些在主循环中操作，有些在中断ISR中操作时，GPIOx的引脚必须都用GPIO_Atomic类型函数操作 ******************************************************************************************************************************************/ @@ -336,12 +336,12 @@ void GPIO_AtomicSetBits(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t w) __enable_irq(); } -/****************************************************************************************************************************************** -* 函数名称: GPIO_AtomicClrBits() +/****************************************************************************************************************************************** +* 函数名称: GPIO_AtomicClrBits() * 功能说明: 将参数指定的从n开始的w位连续引脚的电平置低，确保引脚”读-改-写“操作的原子性（不被中断ISR打断） -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 -* uint32_t w 指定要将引脚电平置低的引脚的个数 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平置低的引脚的个数 * 输 出: 无 * 注意事项: 当GPIOx的16个引脚中，有些在主循环中操作，有些在中断ISR中操作时，GPIOx的引脚必须都用GPIO_Atomic类型函数操作 ******************************************************************************************************************************************/ @@ -356,12 +356,12 @@ void GPIO_AtomicClrBits(GPIO_TypeDef *GPIOx, uint32_t n, uint32_t w) __enable_irq(); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: GPIO_AtomicInvBits() * 功能说明: 将参数指定的从n开始的w位连续引脚的电平反转，确保引脚”读-改-写“操作的原子性（不被中断ISR打断） -* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD -* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 -* uint32_t w 指定要将引脚电平反转的引脚的个数 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOD +* uint32_t n 指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平反转的引脚的个数 * 输 出: 无 * 注意事项: 当GPIOx的16个引脚中，有些在主循环中操作，有些在中断ISR中操作时，GPIOx的引脚必须都用GPIO_Atomic类型函数操作 ******************************************************************************************************************************************/ diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_i2c.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_i2c.c index 8e093f14ee..c69378ca1a 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_i2c.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_i2c.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** -* 文件名称: SWM320_i2c.c -* 功能说明: SWM320单片机的I2C串行接口功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +/****************************************************************************************************************************************** +* 文件名称: SWM320_i2c.c +* 功能说明: SWM320单片机的I2C串行接口功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIES AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIEE. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIES ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIES AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIEE. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIES ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -21,11 +21,11 @@ #include "SWM320.h" #include "SWM320_i2c.h" -/****************************************************************************************************************************************** -* 函数名称: I2C_Init() -* 功能说明: I2C初始化 -* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 -* I2C_InitStructure * initStruct 包含I2C相关设定值的结构体 +/****************************************************************************************************************************************** +* 函数名称: I2C_Init() +* 功能说明: I2C初始化 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 +* I2C_InitStructure * initStruct 包含I2C相关设定值的结构体 * 输 出: 无 * 注意事项: 模块只能工作于主机模式 ******************************************************************************************************************************************/ @@ -125,10 +125,10 @@ void I2C_Init(I2C_TypeDef *I2Cx, I2C_InitStructure *initStruct) } } -/****************************************************************************************************************************************** -* 函数名称: I2C_Open() -* 功能说明: I2C打开，允许收发 -* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 +/****************************************************************************************************************************************** +* 函数名称: I2C_Open() +* 功能说明: I2C打开，允许收发 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -137,10 +137,10 @@ void I2C_Open(I2C_TypeDef *I2Cx) I2Cx->CTRL |= (0x01 << I2C_CTRL_EN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: I2C_Close() -* 功能说明: I2C关闭，禁止收发 -* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 +/****************************************************************************************************************************************** +* 函数名称: I2C_Close() +* 功能说明: I2C关闭，禁止收发 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -149,12 +149,12 @@ void I2C_Close(I2C_TypeDef *I2Cx) I2Cx->CTRL &= ~I2C_CTRL_EN_Msk; } -/****************************************************************************************************************************************** -* 函数名称: I2C_Start() -* 功能说明: 产生起始信号并发送设备地址 -* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 -* uint8_t addr 设备地址 -* 输 出: uint8_t 1 接收到ACK 0 接收到NACK +/****************************************************************************************************************************************** +* 函数名称: I2C_Start() +* 功能说明: 产生起始信号并发送设备地址 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 +* uint8_t addr 设备地址 +* 输 出: uint8_t 1 接收到ACK 0 接收到NACK * 注意事项: 无 ******************************************************************************************************************************************/ uint8_t I2C_Start(I2C_TypeDef *I2Cx, uint8_t addr) @@ -168,10 +168,10 @@ uint8_t I2C_Start(I2C_TypeDef *I2Cx, uint8_t addr) return (I2Cx->MSTCMD & I2C_MSTCMD_RXACK_Msk) ? 0 : 1; } -/****************************************************************************************************************************************** -* 函数名称: I2C_Stop() -* 功能说明: 产生停止信号 -* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 +/****************************************************************************************************************************************** +* 函数名称: I2C_Stop() +* 功能说明: 产生停止信号 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -182,12 +182,12 @@ void I2C_Stop(I2C_TypeDef *I2Cx) __NOP(); //等待发送完成 } -/****************************************************************************************************************************************** -* 函数名称: I2C_Write() -* 功能说明: 写入一个数据 -* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 -* uint8_t data 要写的数据 -* 输 出: uint8_t 1 接收到ACK 0 接收到NACK +/****************************************************************************************************************************************** +* 函数名称: I2C_Write() +* 功能说明: 写入一个数据 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 +* uint8_t data 要写的数据 +* 输 出: uint8_t 1 接收到ACK 0 接收到NACK * 注意事项: 无 ******************************************************************************************************************************************/ uint8_t I2C_Write(I2C_TypeDef *I2Cx, uint8_t data) @@ -200,12 +200,12 @@ uint8_t I2C_Write(I2C_TypeDef *I2Cx, uint8_t data) return (I2Cx->MSTCMD & I2C_MSTCMD_RXACK_Msk) ? 0 : 1; } -/****************************************************************************************************************************************** -* 函数名称: I2C_Read() -* 功能说明: 读取一个数据 -* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 -* uint8_t ack 1 发送ACK 0 发送NACK -* 输 出: uint8_t 读取到的数据 +/****************************************************************************************************************************************** +* 函数名称: I2C_Read() +* 功能说明: 读取一个数据 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C，有效值包括I2C0、I2C1 +* uint8_t ack 1 发送ACK 0 发送NACK +* 输 出: uint8_t 读取到的数据 * 注意事项: 无 ******************************************************************************************************************************************/ uint8_t I2C_Read(I2C_TypeDef *I2Cx, uint8_t ack) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_lcd.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_lcd.c index 427df0d4b6..af2f2d7c38 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_lcd.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_lcd.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_lcd.c -* 功能说明: SWM320单片机的LCD功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 -* 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 功能说明: SWM320单片机的LCD功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -23,11 +23,11 @@ #include -/****************************************************************************************************************************************** -* 函数名称: LCD_Init() -* 功能说明: LCD初始化 -* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD -* LCD_InitStructure * initStruct 包含LCD相关设定值的结构体 +/****************************************************************************************************************************************** +* 函数名称: LCD_Init() +* 功能说明: LCD初始化 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD +* LCD_InitStructure * initStruct 包含LCD相关设定值的结构体 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -74,10 +74,10 @@ void LCD_Init(LCD_TypeDef *LCDx, LCD_InitStructure *initStruct) } } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: LCD_Start() -* 功能说明: 启动一次数据传输 -* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD +* 功能说明: 启动一次数据传输 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -86,11 +86,11 @@ void LCD_Start(LCD_TypeDef *LCDx) LCDx->START |= (1 << LCD_START_GO_Pos) | (1 << LCD_START_BURST_Pos); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: LCD_IsBusy() -* 功能说明: 是否正在进行数据传输 -* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD -* 输 出: uint32_t 1 正在传输数据 0 数据传输已完成 +* 功能说明: 是否正在进行数据传输 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD +* 输 出: uint32_t 1 正在传输数据 0 数据传输已完成 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t LCD_IsBusy(LCD_TypeDef *LCDx) @@ -98,10 +98,10 @@ uint32_t LCD_IsBusy(LCD_TypeDef *LCDx) return (LCDx->START & LCD_START_GO_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: LCD_INTEn() -* 功能说明: LCD中断使能，完成指定长度的数据传输时触发中断 -* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD +* 功能说明: LCD中断使能，完成指定长度的数据传输时触发中断 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -110,10 +110,10 @@ void LCD_INTEn(LCD_TypeDef *LCDx) LCDx->IM = 0; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: LCD_INTDis() -* 功能说明: LCD中断禁止，完成指定长度的数据传输时不触发中断 -* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD +* 功能说明: LCD中断禁止，完成指定长度的数据传输时不触发中断 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -122,10 +122,10 @@ void LCD_INTDis(LCD_TypeDef *LCDx) LCDx->IM = 1; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: LCD_INTClr() -* 功能说明: LCD中断标志清除 -* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD +* 功能说明: LCD中断标志清除 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -134,11 +134,11 @@ void LCD_INTClr(LCD_TypeDef *LCDx) LCDx->IF = 1; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: LCD_INTStat() -* 功能说明: LCD中断状态查询 -* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD -* 输 出: uint32_t 1 完成指定长度的数据传输 0 未完成指定长度的数据传输 +* 功能说明: LCD中断状态查询 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD，有效值包括LCD +* 输 出: uint32_t 1 完成指定长度的数据传输 0 未完成指定长度的数据传输 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t LCD_INTStat(LCD_TypeDef *LCDx) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_norflash.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_norflash.c index a8f6611ffe..f9e306d6fb 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_norflash.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_norflash.c @@ -1,29 +1,29 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_norflash.c -* 功能说明: SWM320单片机的NOR Flash驱动程序 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 功能说明: SWM320单片机的NOR Flash驱动程序 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_norflash.h" -/****************************************************************************************************************************************** -* 函数名称: NORFL_Init() -* 功能说明: NOR Flash控制器初始化 +/****************************************************************************************************************************************** +* 函数名称: NORFL_Init() +* 功能说明: NOR Flash控制器初始化 * 输 入: NORFL_InitStructure * initStruct 包含NOR Flash控制器相关设定值的结构体 * 输 出: 无 * 注意事项: 无 @@ -64,11 +64,11 @@ void NORFL_Init(NORFL_InitStructure *initStruct) NORFLC->IM |= (1 << NORFLC_IM_TIMEOUT_Pos); } -/****************************************************************************************************************************************** -* 函数名称: NORFL_ChipErase() -* 功能说明: NOR Flash整片擦除 +/****************************************************************************************************************************************** +* 函数名称: NORFL_ChipErase() +* 功能说明: NOR Flash整片擦除 * 输 入: 无 -* 输 出: uint32_t 0 擦除成功 1 擦除超时 +* 输 出: uint32_t 0 擦除成功 1 擦除超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t NORFL_ChipErase(void) @@ -91,11 +91,11 @@ uint32_t NORFL_ChipErase(void) return res; } -/****************************************************************************************************************************************** -* 函数名称: NORFL_SectorErase() -* 功能说明: NOR Flash扇区擦除 -* 输 入: uint32_t addr 要擦除扇区的起始地址 -* 输 出: uint32_t 0 擦除成功 1 擦除超时 +/****************************************************************************************************************************************** +* 函数名称: NORFL_SectorErase() +* 功能说明: NOR Flash扇区擦除 +* 输 入: uint32_t addr 要擦除扇区的起始地址 +* 输 出: uint32_t 0 擦除成功 1 擦除超时 * 注意事项: MX29LV128DB 前8扇区为8K、后255扇区为64K MX29LV128DT 前255扇区为64K、后8扇区为8K ******************************************************************************************************************************************/ uint32_t NORFL_SectorErase(uint32_t addr) @@ -119,12 +119,12 @@ uint32_t NORFL_SectorErase(uint32_t addr) return res; } -/****************************************************************************************************************************************** -* 函数名称: NORFL_Write() -* 功能说明: NOR Flash写 -* 输 入: uint32_t addr 数据要写入的地址 -* uint32_t data 要写入的数据 -* 输 出: uint32_t 0 写入成功 1 写入超时 +/****************************************************************************************************************************************** +* 函数名称: NORFL_Write() +* 功能说明: NOR Flash写 +* 输 入: uint32_t addr 数据要写入的地址 +* uint32_t data 要写入的数据 +* 输 出: uint32_t 0 写入成功 1 写入超时 * 注意事项: 硬件连接，数据线为16位时，半字写入；数据线为8位时，字节写入 ******************************************************************************************************************************************/ uint32_t NORFL_Write(uint32_t addr, uint32_t data) @@ -148,11 +148,11 @@ uint32_t NORFL_Write(uint32_t addr, uint32_t data) return res; } -/****************************************************************************************************************************************** -* 函数名称: NORFL_Read() -* 功能说明: NOR Flash读 -* 输 入: uint32_t addr 数据要读出的地址 -* 输 出: uint32_t 读出的数据 +/****************************************************************************************************************************************** +* 函数名称: NORFL_Read() +* 功能说明: NOR Flash读 +* 输 入: uint32_t addr 数据要读出的地址 +* 输 出: uint32_t 读出的数据 * 注意事项: 硬件连接，数据线为16位时，半字读出；数据线为8位时，字节读出 ******************************************************************************************************************************************/ uint32_t NORFL_Read(uint32_t addr) @@ -163,11 +163,11 @@ uint32_t NORFL_Read(uint32_t addr) return (NORFLC->CMD & NORFLC_CMD_DATA_Msk); } -/****************************************************************************************************************************************** -* 函数名称: NORFL_ReadID() -* 功能说明: NOR Flash读ID -* 输 入: uint32_t id_addr ID地址，此参数是芯片相关的，每种芯片都不同 -* 输 出: uint16_t 读取到的ID +/****************************************************************************************************************************************** +* 函数名称: NORFL_ReadID() +* 功能说明: NOR Flash读ID +* 输 入: uint32_t id_addr ID地址，此参数是芯片相关的，每种芯片都不同 +* 输 出: uint16_t 读取到的ID * 注意事项: 无 ******************************************************************************************************************************************/ uint16_t NORFL_ReadID(uint32_t id_addr) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_norflash.h b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_norflash.h index 228ff7032d..77fb034557 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_norflash.h +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_norflash.h @@ -20,8 +20,8 @@ uint32_t NORFL_Read(uint32_t addr); uint16_t NORFL_ReadID(uint32_t id_addr); /* 当前版本总线读只支持字读 -#define NORFL_Read8(addr) *((volatile uint8_t *)(NORFLM_BASE + addr)) -#define NORFL_Read16(addr) *((volatile uint16_t *)(NORFLM_BASE + addr)) */ +#define NORFL_Read8(addr) *((volatile uint8_t *)(NORFLM_BASE + addr)) +#define NORFL_Read16(addr) *((volatile uint16_t *)(NORFLM_BASE + addr)) */ #define NORFL_Read32(addr) *((volatile uint32_t *)(NORFLM_BASE + addr)) #define NORFL_CMD_READ 0 diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_port.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_port.c index bb4c7f0731..5fa0be4ada 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_port.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_port.c @@ -1,36 +1,36 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_port.c -* 功能说明: SWM320单片机的端口引脚功能选择库函数 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 功能说明: SWM320单片机的端口引脚功能选择库函数 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_port.h" -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: PORT_Init() -* 功能说明: 端口引脚功能选择，可用的功能见"SWM320_port.h"文件 -* 输 入: uint32_t PORTx 指定PORT端口，有效值包括PORTA、PORTB、PORTC、PORTM、PORTN、PORTP -* uint32_t n 指定PORT引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 -* uint32_t func 指定端口引脚要设定的功能，其可取值见"SWM320_port.h"文件 -* uint32_t digit_in_en 数字输入使能 +* 功能说明: 端口引脚功能选择，可用的功能见"SWM320_port.h"文件 +* 输 入: uint32_t PORTx 指定PORT端口，有效值包括PORTA、PORTB、PORTC、PORTM、PORTN、PORTP +* uint32_t n 指定PORT引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23 +* uint32_t func 指定端口引脚要设定的功能，其可取值见"SWM320_port.h"文件 +* uint32_t digit_in_en 数字输入使能 * 输 出: 无 * 注意事项: 当引脚标号n为偶数时，func取值只能是FUNMUX0开头的，如FUNMUX0_UART0_RXD -* 当引脚标号n为奇数时，func取值只能是FUNMUX1开头的，如FUNMUX1_UART0_TXD +* 当引脚标号n为奇数时，func取值只能是FUNMUX1开头的，如FUNMUX1_UART0_TXD ******************************************************************************************************************************************/ void PORT_Init(uint32_t PORTx, uint32_t n, uint32_t func, uint32_t digit_in_en) { diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_pwm.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_pwm.c index 45152822e8..0d965e4792 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_pwm.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_pwm.c @@ -1,31 +1,31 @@ -/****************************************************************************************************************************************** -* 文件名称: SWM320_pwm.c -* 功能说明: SWM320单片机的PWM功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +/****************************************************************************************************************************************** +* 文件名称: SWM320_pwm.c +* 功能说明: SWM320单片机的PWM功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_pwm.h" -/****************************************************************************************************************************************** -* 函数名称: PWM_Init() -* 功能说明: PWM初始化 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* PWM_InitStructure * initStruct 包含PWM相关设定值的结构体 +/****************************************************************************************************************************************** +* 函数名称: PWM_Init() +* 功能说明: PWM初始化 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* PWM_InitStructure * initStruct 包含PWM相关设定值的结构体 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -98,12 +98,12 @@ void PWM_Init(PWM_TypeDef *PWMx, PWM_InitStructure *initStruct) } } -/****************************************************************************************************************************************** -* 函数名称: PWM_Start() -* 功能说明: 启动PWM，开始PWM输出 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chA 0 通道A不启动 1 通道A启动 -* uint32_t chB 0 通道B不启动 1 通道B启动 +/****************************************************************************************************************************************** +* 函数名称: PWM_Start() +* 功能说明: 启动PWM，开始PWM输出 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chA 0 通道A不启动 1 通道A启动 +* uint32_t chB 0 通道B不启动 1 通道B启动 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -137,12 +137,12 @@ void PWM_Start(PWM_TypeDef *PWMx, uint32_t chA, uint32_t chB) } } -/****************************************************************************************************************************************** -* 函数名称: PWM_Stop() -* 功能说明: 关闭PWM，停止PWM输出 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chA 0 通道A不关闭 1 通道A关闭 -* uint32_t chB 0 通道B不关闭 1 通道B关闭 +/****************************************************************************************************************************************** +* 函数名称: PWM_Stop() +* 功能说明: 关闭PWM，停止PWM输出 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chA 0 通道A不关闭 1 通道A关闭 +* uint32_t chB 0 通道B不关闭 1 通道B关闭 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -176,12 +176,12 @@ void PWM_Stop(PWM_TypeDef *PWMx, uint32_t chA, uint32_t chB) } } -/****************************************************************************************************************************************** -* 函数名称: PWM_SetCycle() -* 功能说明: 设置周期 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B -* uint16_t cycle 要设定的周期值 +/****************************************************************************************************************************************** +* 函数名称: PWM_SetCycle() +* 功能说明: 设置周期 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* uint16_t cycle 要设定的周期值 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -193,12 +193,12 @@ void PWM_SetCycle(PWM_TypeDef *PWMx, uint32_t chn, uint16_t cycle) PWMx->PERB = cycle; } -/****************************************************************************************************************************************** -* 函数名称: PWM_GetCycle() -* 功能说明: 获取周期 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要查询哪个通道，有效值：PWM_CH_A、PWM_CH_B -* 输 出: uint16_t 获取到的周期值 +/****************************************************************************************************************************************** +* 函数名称: PWM_GetCycle() +* 功能说明: 获取周期 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要查询哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 出: uint16_t 获取到的周期值 * 注意事项: 无 ******************************************************************************************************************************************/ uint16_t PWM_GetCycle(PWM_TypeDef *PWMx, uint32_t chn) @@ -213,12 +213,12 @@ uint16_t PWM_GetCycle(PWM_TypeDef *PWMx, uint32_t chn) return cycle; } -/****************************************************************************************************************************************** -* 函数名称: PWM_SetHDuty() -* 功能说明: 设置高电平时长 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B -* uint16_t hduty 要设定的高电平时长 +/****************************************************************************************************************************************** +* 函数名称: PWM_SetHDuty() +* 功能说明: 设置高电平时长 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* uint16_t hduty 要设定的高电平时长 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -230,12 +230,12 @@ void PWM_SetHDuty(PWM_TypeDef *PWMx, uint32_t chn, uint16_t hduty) PWMx->HIGHB = hduty; } -/****************************************************************************************************************************************** -* 函数名称: PWM_GetHDuty() +/****************************************************************************************************************************************** +* 函数名称: PWM_GetHDuty() * 功能说明: 获取高电平时长 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要查询哪个通道，有效值：PWM_CH_A、PWM_CH_B -* 输 出: uint16_t 获取到的高电平时长 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要查询哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 出: uint16_t 获取到的高电平时长 * 注意事项: 无 ******************************************************************************************************************************************/ uint16_t PWM_GetHDuty(PWM_TypeDef *PWMx, uint32_t chn) @@ -250,12 +250,12 @@ uint16_t PWM_GetHDuty(PWM_TypeDef *PWMx, uint32_t chn) return hduty; } -/****************************************************************************************************************************************** -* 函数名称: PWM_SetDeadzone() -* 功能说明: 设置死区时长 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B -* uint8_t deadzone 要设定的死区时长 +/****************************************************************************************************************************************** +* 函数名称: PWM_SetDeadzone() +* 功能说明: 设置死区时长 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* uint8_t deadzone 要设定的死区时长 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -267,12 +267,12 @@ void PWM_SetDeadzone(PWM_TypeDef *PWMx, uint32_t chn, uint8_t deadzone) PWMx->DZB = deadzone; } -/****************************************************************************************************************************************** -* 函数名称: PWM_GetDeadzone() +/****************************************************************************************************************************************** +* 函数名称: PWM_GetDeadzone() * 功能说明: 获取死区时长 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要查询哪个通道，有效值：PWM_CH_A、PWM_CH_B -* 输 出: uint8_t 获取到的死区时长 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要查询哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 出: uint8_t 获取到的死区时长 * 注意事项: 无 ******************************************************************************************************************************************/ uint8_t PWM_GetDeadzone(PWM_TypeDef *PWMx, uint32_t chn) @@ -287,11 +287,11 @@ uint8_t PWM_GetDeadzone(PWM_TypeDef *PWMx, uint32_t chn) return deadzone; } -/****************************************************************************************************************************************** -* 函数名称: PWM_IntNCycleEn() +/****************************************************************************************************************************************** +* 函数名称: PWM_IntNCycleEn() * 功能说明: 新周期开始中断使能 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -343,11 +343,11 @@ void PWM_IntNCycleEn(PWM_TypeDef *PWMx, uint32_t chn) } } -/****************************************************************************************************************************************** -* 函数名称: PWM_IntNCycleDis() +/****************************************************************************************************************************************** +* 函数名称: PWM_IntNCycleDis() * 功能说明: 新周期开始中断禁能 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -399,11 +399,11 @@ void PWM_IntNCycleDis(PWM_TypeDef *PWMx, uint32_t chn) } } -/****************************************************************************************************************************************** -* 函数名称: PWM_IntNCycleClr() +/****************************************************************************************************************************************** +* 函数名称: PWM_IntNCycleClr() * 功能说明: 新周期开始中断标志清除 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -455,12 +455,12 @@ void PWM_IntNCycleClr(PWM_TypeDef *PWMx, uint32_t chn) } } -/****************************************************************************************************************************************** -* 函数名称: PWM_IntNCycleStat() +/****************************************************************************************************************************************** +* 函数名称: PWM_IntNCycleStat() * 功能说明: 新周期开始中断是否发生 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B -* 输 出: uint32_t 1 新周期开始中断已发生 0 新周期开始中断未发生 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 出: uint32_t 1 新周期开始中断已发生 0 新周期开始中断未发生 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t PWM_IntNCycleStat(PWM_TypeDef *PWMx, uint32_t chn) @@ -515,11 +515,11 @@ uint32_t PWM_IntNCycleStat(PWM_TypeDef *PWMx, uint32_t chn) return int_stat; } -/****************************************************************************************************************************************** -* 函数名称: PWM_IntHEndEn() +/****************************************************************************************************************************************** +* 函数名称: PWM_IntHEndEn() * 功能说明: 高电平结束中断使能 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -571,11 +571,11 @@ void PWM_IntHEndEn(PWM_TypeDef *PWMx, uint32_t chn) } } -/****************************************************************************************************************************************** -* 函数名称: PWM_IntHEndDis() +/****************************************************************************************************************************************** +* 函数名称: PWM_IntHEndDis() * 功能说明: 高电平结束中断禁能 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -627,11 +627,11 @@ void PWM_IntHEndDis(PWM_TypeDef *PWMx, uint32_t chn) } } -/****************************************************************************************************************************************** -* 函数名称: PWM_IntHEndClr() +/****************************************************************************************************************************************** +* 函数名称: PWM_IntHEndClr() * 功能说明: 高电平结束中断标志清除 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -683,12 +683,12 @@ void PWM_IntHEndClr(PWM_TypeDef *PWMx, uint32_t chn) } } -/****************************************************************************************************************************************** -* 函数名称: PWM_IntHEndStat() +/****************************************************************************************************************************************** +* 函数名称: PWM_IntHEndStat() * 功能说明: 高电平结束中断是否发生 -* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 -* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B -* 输 出: uint32_t 1 高电平结束中断已发生 0 高电平结束中断未发生 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM，有效值包括PWM0、PWM1、PWM2、PWM3、PWM4、PWM5 +* uint32_t chn 选择要设置哪个通道，有效值：PWM_CH_A、PWM_CH_B +* 输 出: uint32_t 1 高电平结束中断已发生 0 高电平结束中断未发生 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t PWM_IntHEndStat(PWM_TypeDef *PWMx, uint32_t chn) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_rtc.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_rtc.c index 0489551511..b2cb77a5f3 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_rtc.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_rtc.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_rtc.c -* 功能说明: SWM320单片机的RTC驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 -* 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 功能说明: SWM320单片机的RTC驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -22,11 +22,11 @@ #include "SWM320_rtc.h" static uint32_t calcWeekDay(uint32_t year, uint32_t month, uint32_t date); -/****************************************************************************************************************************************** -* 函数名称: RTC_Init() -* 功能说明: RTC初始化 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，有效值包括RTC -* RTC_InitStructure * initStruct 包含RTC相关设定值的结构体 +/****************************************************************************************************************************************** +* 函数名称: RTC_Init() +* 功能说明: RTC初始化 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，有效值包括RTC +* RTC_InitStructure * initStruct 包含RTC相关设定值的结构体 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -53,7 +53,7 @@ void RTC_Init(RTC_TypeDef *RTCx, RTC_InitStructure *initStruct) RTCx->MONDAY = (calcWeekDay(initStruct->Year, initStruct->Month, initStruct->Date) << RTC_MONDAY_DAY_Pos) | (initStruct->Month << RTC_MONDAY_MON_Pos); - RTCx->YEAR = initStruct->Year - 1901; + RTCx->YEAR = initStruct->Year; RTCx->LOAD = 1 << RTC_LOAD_TIME_Pos; @@ -71,10 +71,10 @@ void RTC_Init(RTC_TypeDef *RTCx, RTC_InitStructure *initStruct) } } -/****************************************************************************************************************************************** -* 函数名称: RTC_Start() -* 功能说明: 启动RTC -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_Start() +* 功能说明: 启动RTC +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -83,10 +83,10 @@ void RTC_Start(RTC_TypeDef *RTCx) RTCx->EN = 1; } -/****************************************************************************************************************************************** -* 函数名称: RTC_Stop() -* 功能说明: 停止RTC -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_Stop() +* 功能说明: 停止RTC +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -95,17 +95,17 @@ void RTC_Stop(RTC_TypeDef *RTCx) RTCx->EN = 0; } -/****************************************************************************************************************************************** -* 函数名称: RTC_GetDateTime() -* 功能说明: 获取当前的时间和日期 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，有效值包括RTC -* RTC_DateTime * dateTime 获取到的时间、日期值存入此指针指向的结构体 +/****************************************************************************************************************************************** +* 函数名称: RTC_GetDateTime() +* 功能说明: 获取当前的时间和日期 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，有效值包括RTC +* RTC_DateTime * dateTime 获取到的时间、日期值存入此指针指向的结构体 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ void RTC_GetDateTime(RTC_TypeDef *RTCx, RTC_DateTime *dateTime) { - dateTime->Year = RTCx->YEAR + 1901; + dateTime->Year = RTCx->YEAR; dateTime->Month = (RTCx->MONDAY & RTC_MONDAY_MON_Msk) >> RTC_MONDAY_MON_Pos; dateTime->Date = (RTCx->DATHUR & RTC_DATHUR_DATE_Msk) >> RTC_DATHUR_DATE_Pos; dateTime->Day = 1 << ((RTCx->MONDAY & RTC_MONDAY_DAY_Msk) >> RTC_MONDAY_DAY_Pos); @@ -114,11 +114,11 @@ void RTC_GetDateTime(RTC_TypeDef *RTCx, RTC_DateTime *dateTime) dateTime->Second = (RTCx->MINSEC & RTC_MINSEC_SEC_Msk) >> RTC_MINSEC_SEC_Pos; } -/****************************************************************************************************************************************** -* 函数名称: RTC_AlarmSetup() -* 功能说明: RTC闹钟设定 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，有效值包括RTC -* RTC_AlarmStructure * alarmStruct 包含RTC闹钟设定值的结构体 +/****************************************************************************************************************************************** +* 函数名称: RTC_AlarmSetup() +* 功能说明: RTC闹钟设定 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，有效值包括RTC +* RTC_AlarmStructure * alarmStruct 包含RTC闹钟设定值的结构体 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -145,13 +145,13 @@ void RTC_AlarmSetup(RTC_TypeDef *RTCx, RTC_AlarmStructure *alarmStruct) NVIC_EnableIRQ(RTC_IRQn); } -/****************************************************************************************************************************************** -* 函数名称: calcWeekDay() -* 功能说明: 计算指定年、月、日是星期几 -* 输 入: uint32_t year 年 -* uint32_t month 月 -* uint32_t date 日 -* 输 出: uint32_t 0 星期日 1 星期一 ... ... 6 星期六 +/****************************************************************************************************************************************** +* 函数名称: calcWeekDay() +* 功能说明: 计算指定年、月、日是星期几 +* 输 入: uint32_t year 年 +* uint32_t month 月 +* uint32_t date 日 +* 输 出: uint32_t 0 星期日 1 星期一 ... ... 6 星期六 * 注意事项: 无 ******************************************************************************************************************************************/ static uint32_t calcWeekDay(uint32_t year, uint32_t month, uint32_t date) @@ -178,10 +178,10 @@ static uint32_t calcWeekDay(uint32_t year, uint32_t month, uint32_t date) return (cnt + 1) % 7; } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntSecondEn() -* 功能说明: 秒中断使能 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntSecondEn() +* 功能说明: 秒中断使能 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -190,10 +190,10 @@ void RTC_IntSecondEn(RTC_TypeDef *RTCx) RTCx->IE |= (1 << RTC_IE_SEC_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntSecondDis() -* 功能说明: 秒中断禁止 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntSecondDis() +* 功能说明: 秒中断禁止 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -202,10 +202,10 @@ void RTC_IntSecondDis(RTC_TypeDef *RTCx) RTCx->IE &= ~(1 << RTC_IE_SEC_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntSecondClr() -* 功能说明: 秒中断标志清除 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntSecondClr() +* 功能说明: 秒中断标志清除 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -214,11 +214,11 @@ void RTC_IntSecondClr(RTC_TypeDef *RTCx) RTCx->IF = (1 << RTC_IF_SEC_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntSecondStat() -* 功能说明: 秒中断状态 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC -* 输 出: uint32_t 1 秒中断发生 0 秒中断未发生 +/****************************************************************************************************************************************** +* 函数名称: RTC_IntSecondStat() +* 功能说明: 秒中断状态 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +* 输 出: uint32_t 1 秒中断发生 0 秒中断未发生 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t RTC_IntSecondStat(RTC_TypeDef *RTCx) @@ -226,10 +226,10 @@ uint32_t RTC_IntSecondStat(RTC_TypeDef *RTCx) return (RTCx->IF & RTC_IF_SEC_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntMinuteEn() -* 功能说明: 分中断使能 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntMinuteEn() +* 功能说明: 分中断使能 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -238,10 +238,10 @@ void RTC_IntMinuteEn(RTC_TypeDef *RTCx) RTCx->IE |= (1 << RTC_IE_MIN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntMinuteDis() -* 功能说明: 分中断禁止 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntMinuteDis() +* 功能说明: 分中断禁止 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -250,10 +250,10 @@ void RTC_IntMinuteDis(RTC_TypeDef *RTCx) RTCx->IE &= ~(1 << RTC_IE_MIN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntMinuteClr() -* 功能说明: 分中断标志清除 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntMinuteClr() +* 功能说明: 分中断标志清除 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -262,11 +262,11 @@ void RTC_IntMinuteClr(RTC_TypeDef *RTCx) RTCx->IF = (1 << RTC_IF_MIN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntMinuteStat() -* 功能说明: 分中断状态 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC -* 输 出: uint32_t 1 分中断发生 0 分中断未发生 +/****************************************************************************************************************************************** +* 函数名称: RTC_IntMinuteStat() +* 功能说明: 分中断状态 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +* 输 出: uint32_t 1 分中断发生 0 分中断未发生 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t RTC_IntMinuteStat(RTC_TypeDef *RTCx) @@ -274,10 +274,10 @@ uint32_t RTC_IntMinuteStat(RTC_TypeDef *RTCx) return (RTCx->IF & RTC_IF_MIN_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntHourEn() -* 功能说明: 时中断使能 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntHourEn() +* 功能说明: 时中断使能 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -286,10 +286,10 @@ void RTC_IntHourEn(RTC_TypeDef *RTCx) RTCx->IE |= (1 << RTC_IE_HOUR_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntHourDis() -* 功能说明: 时中断禁止 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntHourDis() +* 功能说明: 时中断禁止 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -298,10 +298,10 @@ void RTC_IntHourDis(RTC_TypeDef *RTCx) RTCx->IE &= ~(1 << RTC_IE_HOUR_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntHourClr() -* 功能说明: 时中断标志清除 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntHourClr() +* 功能说明: 时中断标志清除 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -310,11 +310,11 @@ void RTC_IntHourClr(RTC_TypeDef *RTCx) RTCx->IF = (1 << RTC_IF_HOUR_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntHourStat() -* 功能说明: 时中断状态 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC -* 输 出: uint32_t 1 时中断发生 0 时中断未发生 +/****************************************************************************************************************************************** +* 函数名称: RTC_IntHourStat() +* 功能说明: 时中断状态 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +* 输 出: uint32_t 1 时中断发生 0 时中断未发生 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t RTC_IntHourStat(RTC_TypeDef *RTCx) @@ -322,10 +322,10 @@ uint32_t RTC_IntHourStat(RTC_TypeDef *RTCx) return (RTCx->IF & RTC_IF_HOUR_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntDateEn() -* 功能说明: 日中断使能 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntDateEn() +* 功能说明: 日中断使能 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -334,10 +334,10 @@ void RTC_IntDateEn(RTC_TypeDef *RTCx) RTCx->IE |= (1 << RTC_IE_DATE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntDateDis() -* 功能说明: 日中断禁止 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntDateDis() +* 功能说明: 日中断禁止 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -346,10 +346,10 @@ void RTC_IntDateDis(RTC_TypeDef *RTCx) RTCx->IE &= ~(1 << RTC_IE_DATE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntDateClr() -* 功能说明: 日中断标志清除 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntDateClr() +* 功能说明: 日中断标志清除 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -358,11 +358,11 @@ void RTC_IntDateClr(RTC_TypeDef *RTCx) RTCx->IF = (1 << RTC_IF_DATE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntDateStat() -* 功能说明: 日中断状态 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC -* 输 出: uint32_t 1 日中断发生 0 日中断未发生 +/****************************************************************************************************************************************** +* 函数名称: RTC_IntDateStat() +* 功能说明: 日中断状态 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +* 输 出: uint32_t 1 日中断发生 0 日中断未发生 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t RTC_IntDateStat(RTC_TypeDef *RTCx) @@ -370,10 +370,10 @@ uint32_t RTC_IntDateStat(RTC_TypeDef *RTCx) return (RTCx->IF & RTC_IF_DATE_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntAlarmEn() -* 功能说明: 闹钟中断使能 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntAlarmEn() +* 功能说明: 闹钟中断使能 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -382,10 +382,10 @@ void RTC_IntAlarmEn(RTC_TypeDef *RTCx) RTCx->IE |= (1 << RTC_IE_ALARM_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntAlarmDis() -* 功能说明: 闹钟中断禁止 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntAlarmDis() +* 功能说明: 闹钟中断禁止 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -394,10 +394,10 @@ void RTC_IntAlarmDis(RTC_TypeDef *RTCx) RTCx->IE &= ~(1 << RTC_IE_ALARM_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntAlarmClr() -* 功能说明: 闹钟中断标志清除 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +/****************************************************************************************************************************************** +* 函数名称: RTC_IntAlarmClr() +* 功能说明: 闹钟中断标志清除 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -406,11 +406,11 @@ void RTC_IntAlarmClr(RTC_TypeDef *RTCx) RTCx->IF = (1 << RTC_IF_ALARM_Pos); } -/****************************************************************************************************************************************** -* 函数名称: RTC_IntAlarmStat() -* 功能说明: 闹钟中断状态 -* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC -* 输 出: uint32_t 1 闹钟中断发生 0 闹钟中断未发生 +/****************************************************************************************************************************************** +* 函数名称: RTC_IntAlarmStat() +* 功能说明: 闹钟中断状态 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC，可取值包括RTC +* 输 出: uint32_t 1 闹钟中断发生 0 闹钟中断未发生 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t RTC_IntAlarmStat(RTC_TypeDef *RTCx) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sdio.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sdio.c index 15d5dac922..849193110c 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sdio.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sdio.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_sdio.c -* 功能说明: SWM320单片机的SDIO接口驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 功能说明: SWM320单片机的SDIO接口驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: 为了通用性、兼容性、易用性，只支持以512字节为单位的读写 -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -23,11 +23,11 @@ SD_CardInfo SD_cardInfo; -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: SDIO_Init() -* 功能说明: SDIO读写SD卡初始化，初始化成高速4线模式、读写以512字节大小进行 -* 输 入: uint32_t freq SDIO_CLK时钟频率 -* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 功能说明: SDIO读写SD卡初始化，初始化成高速4线模式、读写以512字节大小进行 +* 输 入: uint32_t freq SDIO_CLK时钟频率 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SDIO_Init(uint32_t freq) @@ -125,12 +125,12 @@ uint32_t SDIO_Init(uint32_t freq) return SD_RES_OK; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: SDIO_BlockWrite() -* 功能说明: 向SD卡写入数据 -* 输 入: uint32_t block_addr SD卡块地址，每块512字节 -* uint32_t buff[] 要写入的数据 -* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 功能说明: 向SD卡写入数据 +* 输 入: uint32_t block_addr SD卡块地址，每块512字节 +* uint32_t buff[] 要写入的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SDIO_BlockWrite(uint32_t block_addr, uint32_t buff[]) @@ -161,13 +161,13 @@ uint32_t SDIO_BlockWrite(uint32_t block_addr, uint32_t buff[]) return SD_RES_OK; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: SDIO_MultiBlockWrite() -* 功能说明: 向SD卡写入多块数据 -* 输 入: uint32_t block_addr SD卡块地址，每块512字节 -* uint16_t block_cnt 要写入的块数 -* uint32_t buff[] 要写入的数据 -* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 功能说明: 向SD卡写入多块数据 +* 输 入: uint32_t block_addr SD卡块地址，每块512字节 +* uint16_t block_cnt 要写入的块数 +* uint32_t buff[] 要写入的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SDIO_MultiBlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]) @@ -201,13 +201,13 @@ uint32_t SDIO_MultiBlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t return SD_RES_OK; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: SDIO_DMABlockWrite() -* 功能说明: 通过DMA向SD卡写入多块数据 -* 输 入: uint32_t block_addr SD卡块地址，每块512字节 -* uint16_t block_cnt 要写入的块数 -* uint32_t buff[] 要写入的数据 -* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 功能说明: 通过DMA向SD卡写入多块数据 +* 输 入: uint32_t block_addr SD卡块地址，每块512字节 +* uint16_t block_cnt 要写入的块数 +* uint32_t buff[] 要写入的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SDIO_DMABlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]) @@ -233,12 +233,12 @@ uint32_t SDIO_DMABlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t bu return SD_RES_OK; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: SDIO_BlockRead() -* 功能说明: 从SD卡读出数据 -* 输 入: uint32_t block_addr SD卡块地址，每块512字节 -* uint32_t buff[] 读出的数据 -* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 功能说明: 从SD卡读出数据 +* 输 入: uint32_t block_addr SD卡块地址，每块512字节 +* uint32_t buff[] 读出的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SDIO_BlockRead(uint32_t block_addr, uint32_t buff[]) @@ -269,13 +269,13 @@ uint32_t SDIO_BlockRead(uint32_t block_addr, uint32_t buff[]) return SD_RES_OK; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: SDIO_MultiBlockRead() -* 功能说明: 从SD卡读出多块数据 -* 输 入: uint32_t block_addr SD卡块地址，每块512字节 -* uint16_t block_cnt 要读出的块数 -* uint32_t buff[] 读出的数据 -* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 功能说明: 从SD卡读出多块数据 +* 输 入: uint32_t block_addr SD卡块地址，每块512字节 +* uint16_t block_cnt 要读出的块数 +* uint32_t buff[] 读出的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SDIO_MultiBlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]) @@ -309,13 +309,13 @@ uint32_t SDIO_MultiBlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t b return SD_RES_OK; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: SDIO_DMABlockRead() -* 功能说明: 通过DMA从SD卡读出多块数据 -* 输 入: uint32_t block_addr SD卡块地址，每块512字节 -* uint16_t block_cnt 要读出的块数 -* uint32_t buff[] 读出的数据 -* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 功能说明: 通过DMA从SD卡读出多块数据 +* 输 入: uint32_t block_addr SD卡块地址，每块512字节 +* uint16_t block_cnt 要读出的块数 +* uint32_t buff[] 读出的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SDIO_DMABlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]) @@ -341,18 +341,18 @@ uint32_t SDIO_DMABlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buf return SD_RES_OK; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: _SDIO_SendCmd() -* 功能说明: SDIO向SD卡发送命令 -* 输 入: uint32_t cmd 命令索引 -* uint32_t arg 命令参数 -* uint32_t resp_type 响应类型，取值SD_RESP_NO、SD_RESP_32b、SD_RESP_128b、SD_RESP_32b_busy -* uint32_t *resp_data 响应内容 -* uint32_t have_data 是否有数据传输 -* uint32_t data_read 1 读SD卡 0 写SD卡 -* uint16_t block_cnt 读写块个数 -* uint32_t use_dma 1 使用DMA搬运数据 -* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 功能说明: SDIO向SD卡发送命令 +* 输 入: uint32_t cmd 命令索引 +* uint32_t arg 命令参数 +* uint32_t resp_type 响应类型，取值SD_RESP_NO、SD_RESP_32b、SD_RESP_128b、SD_RESP_32b_busy +* uint32_t *resp_data 响应内容 +* uint32_t have_data 是否有数据传输 +* uint32_t data_read 1 读SD卡 0 写SD卡 +* uint16_t block_cnt 读写块个数 +* uint32_t use_dma 1 使用DMA搬运数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t _SDIO_SendCmd(uint32_t cmd, uint32_t arg, uint32_t resp_type, uint32_t *resp_data, uint32_t have_data, uint32_t data_read, uint16_t block_cnt, uint32_t use_dma) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sdram.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sdram.c index 90178f07e8..bc5751f079 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sdram.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sdram.c @@ -1,29 +1,29 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_sdram.c -* 功能说明: SWM320单片机的SDRAM驱动程序 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 功能说明: SWM320单片机的SDRAM驱动程序 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_sdram.h" -/****************************************************************************************************************************************** -* 函数名称: SDRAM_Init() -* 功能说明: SDRAM控制器初始化 +/****************************************************************************************************************************************** +* 函数名称: SDRAM_Init() +* 功能说明: SDRAM控制器初始化 * 输 入: SDRAM_InitStructure * initStruct 包含 SDRAM 控制器相关设定值的结构体 * 输 出: 无 * 注意事项: 无 @@ -79,9 +79,9 @@ void SDRAM_Init(SDRAM_InitStructure *initStruct) ; } -/****************************************************************************************************************************************** -* 函数名称: SDRAM_Enable() -* 功能说明: SDRAM使能，使能后可读写SDRAM +/****************************************************************************************************************************************** +* 函数名称: SDRAM_Enable() +* 功能说明: SDRAM使能，使能后可读写SDRAM * 输 入: 无 * 输 出: 无 * 注意事项: 无 @@ -97,9 +97,9 @@ void SDRAM_Enable(void) __NOP(); } -/****************************************************************************************************************************************** -* 函数名称: SDRAM_Disable() -* 功能说明: SDRAM禁能，禁能后SDRAM颗粒进入低功耗模式、并自刷新，不可读写 +/****************************************************************************************************************************************** +* 函数名称: SDRAM_Disable() +* 功能说明: SDRAM禁能，禁能后SDRAM颗粒进入低功耗模式、并自刷新，不可读写 * 输 入: 无 * 输 出: 无 * 注意事项: 无 diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_spi.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_spi.c index f6025a6e86..09430547eb 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_spi.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_spi.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** -* 文件名称: SWM320_spi.c -* 功能说明: SWM320单片机的SPI功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +/****************************************************************************************************************************************** +* 文件名称: SWM320_spi.c +* 功能说明: SWM320单片机的SPI功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -21,11 +21,11 @@ #include "SWM320.h" #include "SWM320_spi.h" -/****************************************************************************************************************************************** -* 函数名称: SPI_Init() -* 功能说明: SPI同步串行接口初始化，包括帧长度设定、时序设定、速度设定、中断设定、FIFO触发设定 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* SPI_InitStructure * initStruct 包含SPI相关设定值的结构体 +/****************************************************************************************************************************************** +* 函数名称: SPI_Init() +* 功能说明: SPI同步串行接口初始化，包括帧长度设定、时序设定、速度设定、中断设定、FIFO触发设定 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* SPI_InitStructure * initStruct 包含SPI相关设定值的结构体 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -86,10 +86,10 @@ void SPI_Init(SPI_TypeDef *SPIx, SPI_InitStructure *initStruct) } } -/****************************************************************************************************************************************** -* 函数名称: SPI_Open() -* 功能说明: SPI打开，允许收发 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_Open() +* 功能说明: SPI打开，允许收发 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -98,10 +98,10 @@ void SPI_Open(SPI_TypeDef *SPIx) SPIx->CTRL |= (0x01 << SPI_CTRL_EN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_Close() -* 功能说明: SPI关闭，禁止收发 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_Close() +* 功能说明: SPI关闭，禁止收发 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -110,11 +110,11 @@ void SPI_Close(SPI_TypeDef *SPIx) SPIx->CTRL &= ~SPI_CTRL_EN_Msk; } -/****************************************************************************************************************************************** -* 函数名称: SPI_Read() -* 功能说明: 读取一个数据 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 读取到的数据 +/****************************************************************************************************************************************** +* 函数名称: SPI_Read() +* 功能说明: 读取一个数据 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 读取到的数据 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_Read(SPI_TypeDef *SPIx) @@ -122,11 +122,11 @@ uint32_t SPI_Read(SPI_TypeDef *SPIx) return SPIx->DATA; } -/****************************************************************************************************************************************** -* 函数名称: SPI_Write() -* 功能说明: 写入一个数据 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* uint32_t 要写入的数据 +/****************************************************************************************************************************************** +* 函数名称: SPI_Write() +* 功能说明: 写入一个数据 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* uint32_t 要写入的数据 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -135,11 +135,11 @@ void SPI_Write(SPI_TypeDef *SPIx, uint32_t data) SPIx->DATA = data; } -/****************************************************************************************************************************************** -* 函数名称: SPI_WriteWithWait() -* 功能说明: 写入一个数据并等待数据完全发送出去 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1、SPI1 -* uint32_t 要写入的数据 +/****************************************************************************************************************************************** +* 函数名称: SPI_WriteWithWait() +* 功能说明: 写入一个数据并等待数据完全发送出去 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1、SPI1 +* uint32_t 要写入的数据 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -153,12 +153,12 @@ void SPI_WriteWithWait(SPI_TypeDef *SPIx, uint32_t data) ; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: SPI_ReadWrite() * 功能说明: 发送一个数据，并返回发送过程中接收到的 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* uint32_t data 要发送的数据 -* 输 出: uint32_t 接收到的数据 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* uint32_t data 要发送的数据 +* 输 出: uint32_t 接收到的数据 * 注意事项: 对于同一个SPI模块，此函数不应与SPI_Write()混着用，因为SPI_Write()不清除SPI_STAT_RFNE状态 ******************************************************************************************************************************************/ uint32_t SPI_ReadWrite(SPI_TypeDef *SPIx, uint32_t data) @@ -170,11 +170,11 @@ uint32_t SPI_ReadWrite(SPI_TypeDef *SPIx, uint32_t data) return SPIx->DATA; } -/****************************************************************************************************************************************** -* 函数名称: SPI_IsRXEmpty() -* 功能说明: 接收FIFO是否空，如果不空则可以继续SPI_Read() -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 接收FIFO空 0 接收FIFO非空 +/****************************************************************************************************************************************** +* 函数名称: SPI_IsRXEmpty() +* 功能说明: 接收FIFO是否空，如果不空则可以继续SPI_Read() +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 接收FIFO空 0 接收FIFO非空 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_IsRXEmpty(SPI_TypeDef *SPIx) @@ -182,11 +182,11 @@ uint32_t SPI_IsRXEmpty(SPI_TypeDef *SPIx) return (SPIx->STAT & SPI_STAT_RFNE_Msk) ? 0 : 1; } -/****************************************************************************************************************************************** -* 函数名称: SPI_IsTXFull() -* 功能说明: 发送FIFO是否满，如果不满则可以继续SPI_Write() -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 发送FIFO满 0 发送FIFO不满 +/****************************************************************************************************************************************** +* 函数名称: SPI_IsTXFull() +* 功能说明: 发送FIFO是否满，如果不满则可以继续SPI_Write() +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 发送FIFO满 0 发送FIFO不满 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_IsTXFull(SPI_TypeDef *SPIx) @@ -194,11 +194,11 @@ uint32_t SPI_IsTXFull(SPI_TypeDef *SPIx) return (SPIx->STAT & SPI_STAT_TFNF_Msk) ? 0 : 1; } -/****************************************************************************************************************************************** -* 函数名称: SPI_IsTXEmpty() -* 功能说明: 发送FIFO是否空 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 发送FIFO空 0 发送FIFO非空 +/****************************************************************************************************************************************** +* 函数名称: SPI_IsTXEmpty() +* 功能说明: 发送FIFO是否空 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 发送FIFO空 0 发送FIFO非空 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_IsTXEmpty(SPI_TypeDef *SPIx) @@ -206,10 +206,10 @@ uint32_t SPI_IsTXEmpty(SPI_TypeDef *SPIx) return (SPIx->STAT & SPI_STAT_TFE_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXHalfFullEn() -* 功能说明: 接收FIFO半满中断使能 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXHalfFullEn() +* 功能说明: 接收FIFO半满中断使能 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -218,10 +218,10 @@ void SPI_INTRXHalfFullEn(SPI_TypeDef *SPIx) SPIx->IE |= (0x01 << SPI_IE_RFHF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXHalfFullDis() -* 功能说明: 接收FIFO半满中断禁止 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXHalfFullDis() +* 功能说明: 接收FIFO半满中断禁止 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -230,10 +230,10 @@ void SPI_INTRXHalfFullDis(SPI_TypeDef *SPIx) SPIx->IE &= ~(0x01 << SPI_IE_RFHF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXHalfFullClr() -* 功能说明: 接收FIFO半满中断标志清除 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXHalfFullClr() +* 功能说明: 接收FIFO半满中断标志清除 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -242,11 +242,11 @@ void SPI_INTRXHalfFullClr(SPI_TypeDef *SPIx) SPIx->IF = (1 << SPI_IF_RFHF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXHalfFullStat() -* 功能说明: 接收FIFO半满中断状态 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 接收FIFO达到半满 0 接收FIFO未达到半满 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXHalfFullStat() +* 功能说明: 接收FIFO半满中断状态 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 接收FIFO达到半满 0 接收FIFO未达到半满 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_INTRXHalfFullStat(SPI_TypeDef *SPIx) @@ -254,10 +254,10 @@ uint32_t SPI_INTRXHalfFullStat(SPI_TypeDef *SPIx) return (SPIx->IF & SPI_IF_RFHF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXFullEn() -* 功能说明: 接收FIFO满中断使能 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXFullEn() +* 功能说明: 接收FIFO满中断使能 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -266,10 +266,10 @@ void SPI_INTRXFullEn(SPI_TypeDef *SPIx) SPIx->IE |= (0x01 << SPI_IE_RFF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXFullDis() -* 功能说明: 接收FIFO满中断禁止 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXFullDis() +* 功能说明: 接收FIFO满中断禁止 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -278,10 +278,10 @@ void SPI_INTRXFullDis(SPI_TypeDef *SPIx) SPIx->IE &= ~(0x01 << SPI_IE_RFF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXFullClr() -* 功能说明: 接收FIFO满中断标志清除 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXFullClr() +* 功能说明: 接收FIFO满中断标志清除 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -290,11 +290,11 @@ void SPI_INTRXFullClr(SPI_TypeDef *SPIx) SPIx->IF = (1 << SPI_IF_RFF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXFullStat() -* 功能说明: 接收FIFO满中断状态 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 接收FIFO满 0 接收FIFO未满 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXFullStat() +* 功能说明: 接收FIFO满中断状态 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 接收FIFO满 0 接收FIFO未满 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_INTRXFullStat(SPI_TypeDef *SPIx) @@ -302,10 +302,10 @@ uint32_t SPI_INTRXFullStat(SPI_TypeDef *SPIx) return (SPIx->IF & SPI_IF_RFF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXOverflowEn() -* 功能说明: 接收FIFO溢出中断使能 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXOverflowEn() +* 功能说明: 接收FIFO溢出中断使能 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -314,10 +314,10 @@ void SPI_INTRXOverflowEn(SPI_TypeDef *SPIx) SPIx->IE |= (0x01 << SPI_IE_RFOVF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXOverflowDis() -* 功能说明: 接收FIFO溢出中断禁止 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXOverflowDis() +* 功能说明: 接收FIFO溢出中断禁止 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -326,10 +326,10 @@ void SPI_INTRXOverflowDis(SPI_TypeDef *SPIx) SPIx->IE &= ~(0x01 << SPI_IE_RFOVF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXOverflowClr() -* 功能说明: 接收FIFO溢出中断标志清除 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXOverflowClr() +* 功能说明: 接收FIFO溢出中断标志清除 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -338,11 +338,11 @@ void SPI_INTRXOverflowClr(SPI_TypeDef *SPIx) SPIx->IF = (0x01 << SPI_IF_RFOVF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTRXOverflowStat() -* 功能说明: 接收FIFO溢出中断状态 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 接收FIFO溢出 0 接收FIFO未溢出 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTRXOverflowStat() +* 功能说明: 接收FIFO溢出中断状态 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 接收FIFO溢出 0 接收FIFO未溢出 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_INTRXOverflowStat(SPI_TypeDef *SPIx) @@ -350,10 +350,10 @@ uint32_t SPI_INTRXOverflowStat(SPI_TypeDef *SPIx) return (SPIx->IF & SPI_IF_RFOVF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXHalfFullEn() -* 功能说明: 发送FIFO半满中断使能 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXHalfFullEn() +* 功能说明: 发送FIFO半满中断使能 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -362,10 +362,10 @@ void SPI_INTTXHalfFullEn(SPI_TypeDef *SPIx) SPIx->IE |= (0x01 << SPI_IE_TFHF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXHalfFullDis() -* 功能说明: 发送FIFO半满中断禁止 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXHalfFullDis() +* 功能说明: 发送FIFO半满中断禁止 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -374,10 +374,10 @@ void SPI_INTTXHalfFullDis(SPI_TypeDef *SPIx) SPIx->IE &= ~(0x01 << SPI_IE_TFHF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXHalfFullClr() -* 功能说明: 发送FIFO半满中断标志清除 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXHalfFullClr() +* 功能说明: 发送FIFO半满中断标志清除 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -386,11 +386,11 @@ void SPI_INTTXHalfFullClr(SPI_TypeDef *SPIx) SPIx->IF = (1 << SPI_IF_TFHF_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXHalfFullStat() -* 功能说明: 发送FIFO半满中断状态 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 发送FIFO达到半满 0 发送FIFO未达到半满 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXHalfFullStat() +* 功能说明: 发送FIFO半满中断状态 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 发送FIFO达到半满 0 发送FIFO未达到半满 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_INTTXHalfFullStat(SPI_TypeDef *SPIx) @@ -398,10 +398,10 @@ uint32_t SPI_INTTXHalfFullStat(SPI_TypeDef *SPIx) return (SPIx->IF & SPI_IF_TFHF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXEmptyEn() -* 功能说明: 发送FIFO空中断使能 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXEmptyEn() +* 功能说明: 发送FIFO空中断使能 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -410,10 +410,10 @@ void SPI_INTTXEmptyEn(SPI_TypeDef *SPIx) SPIx->IE |= (0x01 << SPI_IE_TFE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXEmptyDis() -* 功能说明: 发送FIFO空中断禁止 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXEmptyDis() +* 功能说明: 发送FIFO空中断禁止 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -422,10 +422,10 @@ void SPI_INTTXEmptyDis(SPI_TypeDef *SPIx) SPIx->IE &= ~(0x01 << SPI_IE_TFE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXEmptyClr() -* 功能说明: 发送FIFO空中断标志清除 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXEmptyClr() +* 功能说明: 发送FIFO空中断标志清除 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -434,11 +434,11 @@ void SPI_INTTXEmptyClr(SPI_TypeDef *SPIx) SPIx->IF = (1 << SPI_IF_TFE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXEmptyStat() -* 功能说明: 发送FIFO空中断状态 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 发送FIFO空 0 发送FIFO非空 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXEmptyStat() +* 功能说明: 发送FIFO空中断状态 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 发送FIFO空 0 发送FIFO非空 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_INTTXEmptyStat(SPI_TypeDef *SPIx) @@ -446,10 +446,10 @@ uint32_t SPI_INTTXEmptyStat(SPI_TypeDef *SPIx) return (SPIx->IF & SPI_IF_TFE_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXCompleteEn() -* 功能说明: 发送FIFO空且发送移位寄存器空中断使能 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXCompleteEn() +* 功能说明: 发送FIFO空且发送移位寄存器空中断使能 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -458,10 +458,10 @@ void SPI_INTTXCompleteEn(SPI_TypeDef *SPIx) SPIx->IE |= (0x01 << SPI_IE_FTC_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXCompleteDis() -* 功能说明: 发送FIFO空且发送移位寄存器空中断禁止 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXCompleteDis() +* 功能说明: 发送FIFO空且发送移位寄存器空中断禁止 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -470,10 +470,10 @@ void SPI_INTTXCompleteDis(SPI_TypeDef *SPIx) SPIx->IE &= ~(0x01 << SPI_IE_FTC_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXCompleteClr() -* 功能说明: 发送FIFO空且发送移位寄存器空中断状态清除 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXCompleteClr() +* 功能说明: 发送FIFO空且发送移位寄存器空中断状态清除 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -482,11 +482,11 @@ void SPI_INTTXCompleteClr(SPI_TypeDef *SPIx) SPIx->IF = (1 << SPI_IF_FTC_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXCompleteStat() -* 功能说明: 发送FIFO空且发送移位寄存器空中断状态 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 发送FIFO空且发送移位寄存器空 0 发送FIFO或发送移位寄存器非空 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXCompleteStat() +* 功能说明: 发送FIFO空且发送移位寄存器空中断状态 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 发送FIFO空且发送移位寄存器空 0 发送FIFO或发送移位寄存器非空 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_INTTXCompleteStat(SPI_TypeDef *SPIx) @@ -494,10 +494,10 @@ uint32_t SPI_INTTXCompleteStat(SPI_TypeDef *SPIx) return (SPIx->IF & SPI_IF_FTC_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXWordCompleteEn() -* 功能说明: 发送FIFO字发送完成中断使能 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXWordCompleteEn() +* 功能说明: 发送FIFO字发送完成中断使能 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -506,10 +506,10 @@ void SPI_INTTXWordCompleteEn(SPI_TypeDef *SPIx) SPIx->IE |= (0x01 << SPI_IE_WTC_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXWordCompleteDis() -* 功能说明: 发送FIFO字发送完成中断禁止 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXWordCompleteDis() +* 功能说明: 发送FIFO字发送完成中断禁止 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -518,10 +518,10 @@ void SPI_INTTXWordCompleteDis(SPI_TypeDef *SPIx) SPIx->IE &= ~(0x01 << SPI_IE_WTC_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXWordCompleteClr() -* 功能说明: 发送FIFO字发送完成中断标志清除 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXWordCompleteClr() +* 功能说明: 发送FIFO字发送完成中断标志清除 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -530,11 +530,11 @@ void SPI_INTTXWordCompleteClr(SPI_TypeDef *SPIx) SPIx->IF = (1 << SPI_IF_WTC_Pos); } -/****************************************************************************************************************************************** -* 函数名称: SPI_INTTXWordCompleteStat() -* 功能说明: 发送FIFO字发送完成中断状态 -* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 -* 输 出: uint32_t 1 发送完成中断已发生 0 发送完成中断未发生 +/****************************************************************************************************************************************** +* 函数名称: SPI_INTTXWordCompleteStat() +* 功能说明: 发送FIFO字发送完成中断状态 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI，有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 发送完成中断已发生 0 发送完成中断未发生 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t SPI_INTTXWordCompleteStat(SPI_TypeDef *SPIx) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sram.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sram.c index 2818f5a8c1..8d0ad56d90 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sram.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_sram.c @@ -1,29 +1,29 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_sram.c -* 功能说明: SWM320单片机的SRAM驱动程序 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 功能说明: SWM320单片机的SRAM驱动程序 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_sram.h" -/****************************************************************************************************************************************** -* 函数名称: SRAM_Init() -* 功能说明: SRAM控制器初始化 +/****************************************************************************************************************************************** +* 函数名称: SRAM_Init() +* 功能说明: SRAM控制器初始化 * 输 入: SRAM_InitStructure * initStruct 包含 SRAM 控制器相关设定值的结构体 * 输 出: 无 * 注意事项: 无 diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_timr.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_timr.c index 1451037f0c..6e51b0b868 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_timr.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_timr.c @@ -1,33 +1,33 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_timr.c -* 功能说明: SWM320单片机的计数器/定时器功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 功能说明: SWM320单片机的计数器/定时器功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_timr.h" -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: TIMR_Init() -* 功能说明: TIMR定时器/计数器初始化 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，有效值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 -* uint32_t mode TIMR_MODE_TIMER 定时器模式 TIMR_MODE_COUNTER 计数器模式 -* uint32_t period 定时/计数周期 -* uint32_t int_en 中断使能 +* 功能说明: TIMR定时器/计数器初始化 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，有效值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +* uint32_t mode TIMR_MODE_TIMER 定时器模式 TIMR_MODE_COUNTER 计数器模式 +* uint32_t period 定时/计数周期 +* uint32_t int_en 中断使能 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -100,10 +100,10 @@ void TIMR_Init(TIMR_TypeDef *TIMRx, uint32_t mode, uint32_t period, uint32_t int } } -/****************************************************************************************************************************************** -* 函数名称: TIMR_Start() -* 功能说明: 启动定时器，从初始值开始计时/计数 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +/****************************************************************************************************************************************** +* 函数名称: TIMR_Start() +* 功能说明: 启动定时器，从初始值开始计时/计数 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -112,10 +112,10 @@ void TIMR_Start(TIMR_TypeDef *TIMRx) TIMRx->CTRL |= TIMR_CTRL_EN_Msk; } -/****************************************************************************************************************************************** -* 函数名称: TIMR_Stop() -* 功能说明: 停止定时器 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +/****************************************************************************************************************************************** +* 函数名称: TIMR_Stop() +* 功能说明: 停止定时器 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -124,10 +124,10 @@ void TIMR_Stop(TIMR_TypeDef *TIMRx) TIMRx->CTRL &= ~TIMR_CTRL_EN_Msk; } -/****************************************************************************************************************************************** -* 函数名称: TIMR_Halt() -* 功能说明: 暂停定时器，计数值保持不变 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +/****************************************************************************************************************************************** +* 函数名称: TIMR_Halt() +* 功能说明: 暂停定时器，计数值保持不变 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -161,10 +161,10 @@ void TIMR_Halt(TIMR_TypeDef *TIMRx) } } -/****************************************************************************************************************************************** -* 函数名称: TIMR_Resume() -* 功能说明: 恢复定时器，从暂停处继续计数 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +/****************************************************************************************************************************************** +* 函数名称: TIMR_Resume() +* 功能说明: 恢复定时器，从暂停处继续计数 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -198,11 +198,11 @@ void TIMR_Resume(TIMR_TypeDef *TIMRx) } } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: TIMR_SetPeriod() -* 功能说明: 设置定时/计数周期 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 -* uint32_t period 定时/计数周期 +* 功能说明: 设置定时/计数周期 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +* uint32_t period 定时/计数周期 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -211,11 +211,11 @@ void TIMR_SetPeriod(TIMR_TypeDef *TIMRx, uint32_t period) TIMRx->LDVAL = period; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: TIMR_GetPeriod() -* 功能说明: 获取定时/计数周期 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 -* 输 出: uint32_t 当前定时/计数周期 +* 功能说明: 获取定时/计数周期 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +* 输 出: uint32_t 当前定时/计数周期 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t TIMR_GetPeriod(TIMR_TypeDef *TIMRx) @@ -223,11 +223,11 @@ uint32_t TIMR_GetPeriod(TIMR_TypeDef *TIMRx) return TIMRx->LDVAL; } -/****************************************************************************************************************************************** -* 函数名称: TIMR_GetCurValue() -* 功能说明: 获取当前计数值 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 -* 输 出: uint32_t 当前计数值 +/****************************************************************************************************************************************** +* 函数名称: TIMR_GetCurValue() +* 功能说明: 获取当前计数值 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +* 输 出: uint32_t 当前计数值 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t TIMR_GetCurValue(TIMR_TypeDef *TIMRx) @@ -235,10 +235,10 @@ uint32_t TIMR_GetCurValue(TIMR_TypeDef *TIMRx) return TIMRx->CVAL; } -/****************************************************************************************************************************************** -* 函数名称: TIMR_INTEn() -* 功能说明: 使能中断 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +/****************************************************************************************************************************************** +* 函数名称: TIMR_INTEn() +* 功能说明: 使能中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -278,10 +278,10 @@ void TIMR_INTEn(TIMR_TypeDef *TIMRx) } } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: TIMR_INTDis() -* 功能说明: 禁能中断 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +* 功能说明: 禁能中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -315,10 +315,10 @@ void TIMR_INTDis(TIMR_TypeDef *TIMRx) } } -/****************************************************************************************************************************************** -* 函数名称: TIMR_INTClr() -* 功能说明: 清除中断标志 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +/****************************************************************************************************************************************** +* 函数名称: TIMR_INTClr() +* 功能说明: 清除中断标志 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -352,11 +352,11 @@ void TIMR_INTClr(TIMR_TypeDef *TIMRx) } } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: TIMR_INTStat() -* 功能说明: 获取中断状态 -* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 -* 输 出: uint32_t 0 TIMRx未产生中断 1 TIMRx产生了中断 +* 功能说明: 获取中断状态 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器，可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、TIMR5 +* 输 出: uint32_t 0 TIMRx未产生中断 1 TIMRx产生了中断 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t TIMR_INTStat(TIMR_TypeDef *TIMRx) @@ -385,11 +385,11 @@ uint32_t TIMR_INTStat(TIMR_TypeDef *TIMRx) return 0; } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: Pulse_Init() -* 功能说明: 脉宽测量功能初始化 -* 输 入: uint32_t pulse PULSE_LOW 测量低脉冲宽度 PULSE_HIGH 测量高脉冲宽度 -* uint32_t int_en 是否使能脉冲测量完成中断 +* 功能说明: 脉宽测量功能初始化 +* 输 入: uint32_t pulse PULSE_LOW 测量低脉冲宽度 PULSE_HIGH 测量高脉冲宽度 +* uint32_t int_en 是否使能脉冲测量完成中断 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -407,9 +407,9 @@ void Pulse_Init(uint32_t pulse, uint32_t int_en) NVIC_EnableIRQ(PULSE_IRQn); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: Pulse_Start() -* 功能说明: 脉宽测量功能启动，测量到脉宽后会自动关闭测量功能 +* 功能说明: 脉宽测量功能启动，测量到脉宽后会自动关闭测量功能 * 输 入: 无 * 输 出: 无 * 注意事项: 无 @@ -419,11 +419,11 @@ void Pulse_Start(void) TIMRG->PCTRL |= (1 << TIMRG_PCTRL_EN_Pos); } -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 函数名称: Pulse_Done() -* 功能说明: 脉宽测量是否完成 +* 功能说明: 脉宽测量是否完成 * 输 入: 无 -* 输 出: uint32_t 1 测量已完成 0 测量未完成 +* 输 出: uint32_t 1 测量已完成 0 测量未完成 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t Pulse_Done(void) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_uart.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_uart.c index 721184fd94..c60b7fa825 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_uart.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_uart.c @@ -1,31 +1,31 @@ -/****************************************************************************************************************************************** -* 文件名称: SWM320_uart.c -* 功能说明: SWM320单片机的UART串口功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +/****************************************************************************************************************************************** +* 文件名称: SWM320_uart.c +* 功能说明: SWM320单片机的UART串口功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: 没有编写LIN功能相关的函数 -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * -* COPYRIGHT 2012 Synwit Technology +* COPYRIGHT 2012 Synwit Technology *******************************************************************************************************************************************/ #include "SWM320.h" #include "SWM320_uart.h" -/****************************************************************************************************************************************** -* 函数名称: UART_Init() -* 功能说明: UART串口初始化 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* UART_InitStructure * initStruct 包含UART串口相关设定值的结构体 +/****************************************************************************************************************************************** +* 函数名称: UART_Init() +* 功能说明: UART串口初始化 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* UART_InitStructure * initStruct 包含UART串口相关设定值的结构体 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -62,8 +62,8 @@ void UART_Init(UART_TypeDef *UARTx, UART_InitStructure *initStruct) (initStruct->StopBits << UART_CTRL_STOP2b_Pos); /* 在SWM320中，当 RXLVL >= RXTHR 时触发中断，如果RXTHR设置为0的话，在未接收到数据时就会一直触发中断； - 其他芯片中，当 RXLVL > RXTHR 时触发中断，为解决SWM320中RXTHR不能为0的问题，并统一库函数API，这里将RXTHR设置值加一 - */ + 其他芯片中，当 RXLVL > RXTHR 时触发中断，为解决SWM320中RXTHR不能为0的问题，并统一库函数API，这里将RXTHR设置值加一 + */ switch ((uint32_t)UARTx) // 软件复位不能清零 NVIC 寄存器，若不手动清除，下面的代码清零 RXTHR 时会导致一直进入 ISR { case ((uint32_t)UART0): @@ -139,10 +139,10 @@ void UART_Init(UART_TypeDef *UARTx, UART_InitStructure *initStruct) } } -/****************************************************************************************************************************************** -* 函数名称: UART_Open() -* 功能说明: UART串口打开 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_Open() +* 功能说明: UART串口打开 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -151,10 +151,10 @@ void UART_Open(UART_TypeDef *UARTx) UARTx->CTRL |= (0x01 << UART_CTRL_EN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_Close() -* 功能说明: UART串口关闭 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_Close() +* 功能说明: UART串口关闭 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -163,11 +163,11 @@ void UART_Close(UART_TypeDef *UARTx) UARTx->CTRL &= ~(0x01 << UART_CTRL_EN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_WriteByte() -* 功能说明: 发送一个字节数据 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，可取值包括UART0、UART1、UART2、UART3、UART4 -* uint32_t data 要发送的字节 +/****************************************************************************************************************************************** +* 函数名称: UART_WriteByte() +* 功能说明: 发送一个字节数据 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，可取值包括UART0、UART1、UART2、UART3、UART4 +* uint32_t data 要发送的字节 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -176,12 +176,12 @@ void UART_WriteByte(UART_TypeDef *UARTx, uint32_t data) UARTx->DATA = data; } -/****************************************************************************************************************************************** -* 函数名称: UART_ReadByte() -* 功能说明: 读取一个字节数据，并指出数据是否Valid -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，可取值包括UART0、UART1、UART2、UART3、UART4 -* uint32_t * data 接收到的数据 -* 输 出: uint32_t 0 无错误 UART_ERR_PARITY 奇偶校验错误 +/****************************************************************************************************************************************** +* 函数名称: UART_ReadByte() +* 功能说明: 读取一个字节数据，并指出数据是否Valid +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，可取值包括UART0、UART1、UART2、UART3、UART4 +* uint32_t * data 接收到的数据 +* 输 出: uint32_t 0 无错误 UART_ERR_PARITY 奇偶校验错误 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_ReadByte(UART_TypeDef *UARTx, uint32_t *data) @@ -196,11 +196,11 @@ uint32_t UART_ReadByte(UART_TypeDef *UARTx, uint32_t *data) return 0; } -/****************************************************************************************************************************************** -* 函数名称: UART_IsTXBusy() -* 功能说明: UART是否正在发送数据 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 1 UART正在发送数据 0 数据已发完 +/****************************************************************************************************************************************** +* 函数名称: UART_IsTXBusy() +* 功能说明: UART是否正在发送数据 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 UART正在发送数据 0 数据已发完 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_IsTXBusy(UART_TypeDef *UARTx) @@ -208,11 +208,11 @@ uint32_t UART_IsTXBusy(UART_TypeDef *UARTx) return (UARTx->CTRL & UART_CTRL_TXIDLE_Msk) ? 0 : 1; } -/****************************************************************************************************************************************** -* 函数名称: UART_IsRXFIFOEmpty() -* 功能说明: 接收FIFO是否为空，如果不空则说明其中有数据可以读取 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 1 接收FIFO空 0 接收FIFO非空 +/****************************************************************************************************************************************** +* 函数名称: UART_IsRXFIFOEmpty() +* 功能说明: 接收FIFO是否为空，如果不空则说明其中有数据可以读取 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 接收FIFO空 0 接收FIFO非空 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_IsRXFIFOEmpty(UART_TypeDef *UARTx) @@ -220,11 +220,11 @@ uint32_t UART_IsRXFIFOEmpty(UART_TypeDef *UARTx) return (UARTx->CTRL & UART_CTRL_RXNE_Msk) ? 0 : 1; } -/****************************************************************************************************************************************** -* 函数名称: UART_IsTXFIFOFull() -* 功能说明: 发送FIFO是否为满，如果不满则可以继续向其中写入数据 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 1 发送FIFO满 0 发送FIFO不满 +/****************************************************************************************************************************************** +* 函数名称: UART_IsTXFIFOFull() +* 功能说明: 发送FIFO是否为满，如果不满则可以继续向其中写入数据 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 发送FIFO满 0 发送FIFO不满 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_IsTXFIFOFull(UART_TypeDef *UARTx) @@ -232,11 +232,11 @@ uint32_t UART_IsTXFIFOFull(UART_TypeDef *UARTx) return (UARTx->CTRL & UART_CTRL_TXFF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: UART_SetBaudrate() -* 功能说明: 设置波特率 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* uint32_t baudrate 要设置的波特率 +/****************************************************************************************************************************************** +* 函数名称: UART_SetBaudrate() +* 功能说明: 设置波特率 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* uint32_t baudrate 要设置的波特率 * 输 出: 无 * 注意事项: 不要在串口工作时更改波特率，使用此函数前请先调用UART_Close()关闭串口 ******************************************************************************************************************************************/ @@ -246,11 +246,11 @@ void UART_SetBaudrate(UART_TypeDef *UARTx, uint32_t baudrate) UARTx->BAUD |= ((SystemCoreClock / 16 / baudrate - 1) << UART_BAUD_BAUD_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_GetBaudrate() -* 功能说明: 查询波特率 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 当前波特率 +/****************************************************************************************************************************************** +* 函数名称: UART_GetBaudrate() +* 功能说明: 查询波特率 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 当前波特率 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_GetBaudrate(UART_TypeDef *UARTx) @@ -258,12 +258,12 @@ uint32_t UART_GetBaudrate(UART_TypeDef *UARTx) return SystemCoreClock / 16 / (((UARTx->BAUD & UART_BAUD_BAUD_Msk) >> UART_BAUD_BAUD_Pos) + 1); } -/****************************************************************************************************************************************** -* 函数名称: UART_CTSConfig() -* 功能说明: UART CTS流控配置 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* uint32_t enable 1 使能CTS流控 0 禁止CTS流控 -* uint32_t polarity 0 CTS输入为低表示可以发送数据 1 CTS输入为高表示可以发送数据 +/****************************************************************************************************************************************** +* 函数名称: UART_CTSConfig() +* 功能说明: UART CTS流控配置 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* uint32_t enable 1 使能CTS流控 0 禁止CTS流控 +* uint32_t polarity 0 CTS输入为低表示可以发送数据 1 CTS输入为高表示可以发送数据 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -274,11 +274,11 @@ void UART_CTSConfig(UART_TypeDef *UARTx, uint32_t enable, uint32_t polarity) (polarity << UART_CTSCR_POL_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_CTSLineState() -* 功能说明: UART CTS线当前状态 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 0 CTS线当前为低电平 1 CTS线当前为高电平 +/****************************************************************************************************************************************** +* 函数名称: UART_CTSLineState() +* 功能说明: UART CTS线当前状态 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 0 CTS线当前为低电平 1 CTS线当前为高电平 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_CTSLineState(UART_TypeDef *UARTx) @@ -286,13 +286,13 @@ uint32_t UART_CTSLineState(UART_TypeDef *UARTx) return (UARTx->CTSCR & UART_CTSCR_STAT_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: UART_RTSConfig() -* 功能说明: UART RTS流控配置 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* uint32_t enable 1 使能RTS流控 0 禁止RTS流控 -* uint32_t polarity 0 RTS输出低表示可以接收数据 1 RTS输出高表示可以接收数据 -* uint32_t threshold RTS流控的触发阈值，可取值UART_RTS_1BYTE、UART_RTS_2BYTE、UART_RTS_4BYTE、UART_RTS_6BYTE +/****************************************************************************************************************************************** +* 函数名称: UART_RTSConfig() +* 功能说明: UART RTS流控配置 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* uint32_t enable 1 使能RTS流控 0 禁止RTS流控 +* uint32_t polarity 0 RTS输出低表示可以接收数据 1 RTS输出高表示可以接收数据 +* uint32_t threshold RTS流控的触发阈值，可取值UART_RTS_1BYTE、UART_RTS_2BYTE、UART_RTS_4BYTE、UART_RTS_6BYTE * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -304,11 +304,11 @@ void UART_RTSConfig(UART_TypeDef *UARTx, uint32_t enable, uint32_t polarity, uin (threshold << UART_RTSCR_THR_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_RTSLineState() -* 功能说明: UART RTS线当前状态 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 0 RTS线当前为低电平 1 RTS线当前为高电平 +/****************************************************************************************************************************************** +* 函数名称: UART_RTSLineState() +* 功能说明: UART RTS线当前状态 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 0 RTS线当前为低电平 1 RTS线当前为高电平 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_RTSLineState(UART_TypeDef *UARTx) @@ -316,12 +316,12 @@ uint32_t UART_RTSLineState(UART_TypeDef *UARTx) return (UARTx->RTSCR & UART_RTSCR_STAT_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: UART_LINConfig() -* 功能说明: UART LIN功能配置 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* uint32_t detectedIEn 检测到Break中断使能 -* uint32_t generatedIEn Break发送完成中断使能 +/****************************************************************************************************************************************** +* 函数名称: UART_LINConfig() +* 功能说明: UART LIN功能配置 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* uint32_t detectedIEn 检测到Break中断使能 +* uint32_t generatedIEn Break发送完成中断使能 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -332,10 +332,10 @@ void UART_LINConfig(UART_TypeDef *UARTx, uint32_t detectedIEn, uint32_t generate (generatedIEn << UART_LINCR_GENBRKIE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_LINGenerate() -* 功能说明: UART LIN产生/发送Break -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_LINGenerate() +* 功能说明: UART LIN产生/发送Break +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -344,11 +344,11 @@ void UART_LINGenerate(UART_TypeDef *UARTx) UARTx->LINCR |= (1 << UART_LINCR_GENBRK_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_LINIsDetected() -* 功能说明: UART LIN是否检测到Break -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 1 检测到LIN Break 0 未检测到LIN Break +/****************************************************************************************************************************************** +* 函数名称: UART_LINIsDetected() +* 功能说明: UART LIN是否检测到Break +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 检测到LIN Break 0 未检测到LIN Break * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_LINIsDetected(UART_TypeDef *UARTx) @@ -356,11 +356,11 @@ uint32_t UART_LINIsDetected(UART_TypeDef *UARTx) return (UARTx->LINCR & UART_LINCR_BRKDETIF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: UART_LINIsGenerated() -* 功能说明: UART LIN Break是否发送完成 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 1 LIN Break 发送完成 0 LIN Break发送未完成 +/****************************************************************************************************************************************** +* 函数名称: UART_LINIsGenerated() +* 功能说明: UART LIN Break是否发送完成 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 LIN Break 发送完成 0 LIN Break发送未完成 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_LINIsGenerated(UART_TypeDef *UARTx) @@ -368,13 +368,13 @@ uint32_t UART_LINIsGenerated(UART_TypeDef *UARTx) return (UARTx->LINCR & UART_LINCR_GENBRKIF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: UART_ABRStart() -* 功能说明: UART 自动波特率检测开始 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* uint32_t detectChar 用于自动检测、计算波特率的检测字符 -* 8位数据时可取值：0xFF、0xFE、0xF8、0x80，分别表示发送方必须发送0xFF、0xFE、0xF8、0x80 -* 9位数据时可取值：0x1FF、0x1FE、0x1F8、0x180，分别表示发送方必须发送0x1FF、0x1FE、0x1F8、0x180 +/****************************************************************************************************************************************** +* 函数名称: UART_ABRStart() +* 功能说明: UART 自动波特率检测开始 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* uint32_t detectChar 用于自动检测、计算波特率的检测字符 +* 8位数据时可取值：0xFF、0xFE、0xF8、0x80，分别表示发送方必须发送0xFF、0xFE、0xF8、0x80 +* 9位数据时可取值：0x1FF、0x1FE、0x1F8、0x180，分别表示发送方必须发送0x1FF、0x1FE、0x1F8、0x180 * 输 出: 无 * 注意事项: 自动波特率检测时不能开启奇偶校验 ******************************************************************************************************************************************/ @@ -399,11 +399,11 @@ void UART_ABRStart(UART_TypeDef *UARTx, uint32_t detectChar) (bits << UART_BAUD_ABRBIT_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_ABRIsDone() -* 功能说明: UART 自动波特率是否完成 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 0 未完成 UART_ABR_RES_OK 已完成，且成功 UART_ABR_RES_ERR 已完成，但失败、出错 +/****************************************************************************************************************************************** +* 函数名称: UART_ABRIsDone() +* 功能说明: UART 自动波特率是否完成 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 0 未完成 UART_ABR_RES_OK 已完成，且成功 UART_ABR_RES_ERR 已完成，但失败、出错 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_ABRIsDone(UART_TypeDef *UARTx) @@ -422,10 +422,10 @@ uint32_t UART_ABRIsDone(UART_TypeDef *UARTx) } } -/****************************************************************************************************************************************** -* 函数名称: UART_INTRXThresholdEn() -* 功能说明: 当RX FIFO中数据个数 >= RXThreshold时 触发中断 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_INTRXThresholdEn() +* 功能说明: 当RX FIFO中数据个数 >= RXThreshold时 触发中断 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -434,10 +434,10 @@ void UART_INTRXThresholdEn(UART_TypeDef *UARTx) UARTx->CTRL |= (0x01 << UART_CTRL_RXIE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_INTRXThresholdDis() -* 功能说明: 当RX FIFO中数据个数 >= RXThreshold时 不触发中断 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_INTRXThresholdDis() +* 功能说明: 当RX FIFO中数据个数 >= RXThreshold时 不触发中断 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -446,11 +446,11 @@ void UART_INTRXThresholdDis(UART_TypeDef *UARTx) UARTx->CTRL &= ~(0x01 << UART_CTRL_RXIE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_INTRXThresholdStat() -* 功能说明: 是否RX FIFO中数据个数 >= RXThreshold -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 1 RX FIFO中数据个数 >= RXThreshold 0 RX FIFO中数据个数 < RXThreshold +/****************************************************************************************************************************************** +* 函数名称: UART_INTRXThresholdStat() +* 功能说明: 是否RX FIFO中数据个数 >= RXThreshold +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 RX FIFO中数据个数 >= RXThreshold 0 RX FIFO中数据个数 < RXThreshold * 注意事项: RXIF = RXTHRF & RXIE ******************************************************************************************************************************************/ uint32_t UART_INTRXThresholdStat(UART_TypeDef *UARTx) @@ -458,10 +458,10 @@ uint32_t UART_INTRXThresholdStat(UART_TypeDef *UARTx) return (UARTx->BAUD & UART_BAUD_RXIF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: UART_INTTXThresholdEn() -* 功能说明: 当TX FIFO中数据个数 <= TXThreshold时 触发中断 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_INTTXThresholdEn() +* 功能说明: 当TX FIFO中数据个数 <= TXThreshold时 触发中断 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -470,10 +470,10 @@ void UART_INTTXThresholdEn(UART_TypeDef *UARTx) UARTx->CTRL |= (0x01 << UART_CTRL_TXIE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_INTTXThresholdDis() -* 功能说明: 当TX FIFO中数据个数 <= TXThreshold时 不触发中断 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_INTTXThresholdDis() +* 功能说明: 当TX FIFO中数据个数 <= TXThreshold时 不触发中断 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -482,11 +482,11 @@ void UART_INTTXThresholdDis(UART_TypeDef *UARTx) UARTx->CTRL &= ~(0x01 << UART_CTRL_TXIE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_INTTXThresholdStat() -* 功能说明: 是否TX FIFO中数据个数 <= TXThreshold -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 1 TX FIFO中数据个数 <= TXThreshold 0 TX FIFO中数据个数 > TXThreshold +/****************************************************************************************************************************************** +* 函数名称: UART_INTTXThresholdStat() +* 功能说明: 是否TX FIFO中数据个数 <= TXThreshold +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 TX FIFO中数据个数 <= TXThreshold 0 TX FIFO中数据个数 > TXThreshold * 注意事项: TXIF = TXTHRF & TXIE ******************************************************************************************************************************************/ uint32_t UART_INTTXThresholdStat(UART_TypeDef *UARTx) @@ -494,10 +494,10 @@ uint32_t UART_INTTXThresholdStat(UART_TypeDef *UARTx) return (UARTx->BAUD & UART_BAUD_TXIF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: UART_INTTimeoutEn() -* 功能说明: 接收发生超时时 触发中断 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_INTTimeoutEn() +* 功能说明: 接收发生超时时 触发中断 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -506,10 +506,10 @@ void UART_INTTimeoutEn(UART_TypeDef *UARTx) UARTx->CTRL |= (0x01 << UART_CTRL_TOIE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_INTTimeoutDis() -* 功能说明: 接收发生超时时 不触发中断 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_INTTimeoutDis() +* 功能说明: 接收发生超时时 不触发中断 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -518,11 +518,11 @@ void UART_INTTimeoutDis(UART_TypeDef *UARTx) UARTx->CTRL &= ~(0x01 << UART_CTRL_TOIE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_INTTimeoutStat() -* 功能说明: 是否发生了接收超时，即超过 TimeoutTime/(Baudrate/10) 秒没有在RX线上接收到数据时触发中断 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 1 发生了接收超时 0 未发生接收超时 +/****************************************************************************************************************************************** +* 函数名称: UART_INTTimeoutStat() +* 功能说明: 是否发生了接收超时，即超过 TimeoutTime/(Baudrate/10) 秒没有在RX线上接收到数据时触发中断 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 发生了接收超时 0 未发生接收超时 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_INTTimeoutStat(UART_TypeDef *UARTx) @@ -530,10 +530,10 @@ uint32_t UART_INTTimeoutStat(UART_TypeDef *UARTx) return (UARTx->BAUD & UART_BAUD_TOIF_Msk) ? 1 : 0; } -/****************************************************************************************************************************************** -* 函数名称: UART_INTTXDoneEn() -* 功能说明: 发送FIFO空且发送移位寄存器空中断使能 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_INTTXDoneEn() +* 功能说明: 发送FIFO空且发送移位寄存器空中断使能 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -542,10 +542,10 @@ void UART_INTTXDoneEn(UART_TypeDef *UARTx) UARTx->CTRL |= (0x01 << UART_CTRL_TXDOIE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_INTTXDoneDis() -* 功能说明: 发送FIFO空且发送移位寄存器空中断禁止 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +/****************************************************************************************************************************************** +* 函数名称: UART_INTTXDoneDis() +* 功能说明: 发送FIFO空且发送移位寄存器空中断禁止 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -554,11 +554,11 @@ void UART_INTTXDoneDis(UART_TypeDef *UARTx) UARTx->CTRL &= ~(0x01 << UART_CTRL_TXDOIE_Pos); } -/****************************************************************************************************************************************** -* 函数名称: UART_INTTXDoneStat() -* 功能说明: 发送FIFO空且发送移位寄存器空中断状态 -* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 -* 输 出: uint32_t 1 发送FIFO空且发送移位寄存器空 0 发送FIFO或发送移位寄存器未空 +/****************************************************************************************************************************************** +* 函数名称: UART_INTTXDoneStat() +* 功能说明: 发送FIFO空且发送移位寄存器空中断状态 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口，有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 发送FIFO空且发送移位寄存器空 0 发送FIFO或发送移位寄存器未空 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t UART_INTTXDoneStat(UART_TypeDef *UARTx) diff --git a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_wdt.c b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_wdt.c index 7cc8244685..db6d7cef28 100644 --- a/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_wdt.c +++ b/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_wdt.c @@ -1,18 +1,18 @@ -/****************************************************************************************************************************************** +/****************************************************************************************************************************************** * 文件名称: SWM320_wdt.c -* 功能说明: SWM320单片机的WDT看门狗功能驱动库 -* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 功能说明: SWM320单片机的WDT看门狗功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 * 注意事项: -* 版本日期: V1.1.0 2017年10月25日 -* 升级记录: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: * * ******************************************************************************************************************************************* * @attention * -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION -* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE -* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- * -ECTION WITH THEIR PRODUCTS. * @@ -21,14 +21,14 @@ #include "SWM320.h" #include "SWM320_wdt.h" -/****************************************************************************************************************************************** -* 函数名称: WDT_Init() -* 功能说明: WDT看门狗初始化 -* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT -* uint32_t peroid 取值0--4294967295，单位为单片机系统时钟周期 -* uint32_t mode WDT_MODE_RESET 超时产生复位 WDT_MODE_INTERRUPT 超时产生中断 +/****************************************************************************************************************************************** +* 函数名称: WDT_Init() +* 功能说明: WDT看门狗初始化 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT +* uint32_t peroid 取值0--4294967295，单位为单片机系统时钟周期 +* uint32_t mode WDT_MODE_RESET 超时产生复位 WDT_MODE_INTERRUPT 超时产生中断 * 输 出: 无 -* 注意事项: 复位使能时中断不起作用，因为计数周期结束时芯片直接复位了，无法响应中断 +* 注意事项: 无 ******************************************************************************************************************************************/ void WDT_Init(WDT_TypeDef *WDTx, uint32_t peroid, uint32_t mode) { @@ -36,26 +36,28 @@ void WDT_Init(WDT_TypeDef *WDTx, uint32_t peroid, uint32_t mode) WDT_Stop(WDTx); //设置前先关闭 - WDTx->LOAD = peroid; - if (mode == WDT_MODE_RESET) { + WDTx->LOAD = peroid / 2; //第一个计数周期置位中断标志、第二个计数周期将芯片复位 + NVIC_DisableIRQ(WDT_IRQn); WDTx->CR |= (1 << WDT_CR_RSTEN_Pos); } else //mode == WDT_MODE_INTERRUPT { + WDTx->LOAD = peroid; + NVIC_EnableIRQ(WDT_IRQn); WDTx->CR &= ~(1 << WDT_CR_RSTEN_Pos); } } -/****************************************************************************************************************************************** -* 函数名称: WDT_Start() -* 功能说明: 启动指定WDT，开始倒计时 -* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT +/****************************************************************************************************************************************** +* 函数名称: WDT_Start() +* 功能说明: 启动指定WDT，开始倒计时 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -64,10 +66,10 @@ void WDT_Start(WDT_TypeDef *WDTx) WDTx->CR |= (0x01 << WDT_CR_EN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: WDT_Stop() -* 功能说明: 关闭指定WDT，停止倒计时 -* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT +/****************************************************************************************************************************************** +* 函数名称: WDT_Stop() +* 功能说明: 关闭指定WDT，停止倒计时 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -76,10 +78,10 @@ void WDT_Stop(WDT_TypeDef *WDTx) WDTx->CR &= ~(0x01 << WDT_CR_EN_Pos); } -/****************************************************************************************************************************************** -* 函数名称: WDT_Feed() -* 功能说明: 喂狗，重新从装载值开始倒计时 -* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT +/****************************************************************************************************************************************** +* 函数名称: WDT_Feed() +* 功能说明: 喂狗，重新从装载值开始倒计时 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -88,11 +90,11 @@ void WDT_Feed(WDT_TypeDef *WDTx) WDTx->FEED = 0x55; } -/****************************************************************************************************************************************** -* 函数名称: WDT_GetValue() -* 功能说明: 获取指定看门狗定时器的当前倒计时值 -* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT -* 输 出: int32_t 看门狗当前计数值 +/****************************************************************************************************************************************** +* 函数名称: WDT_GetValue() +* 功能说明: 获取指定看门狗定时器的当前倒计时值 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT +* 输 出: int32_t 看门狗当前计数值 * 注意事项: 无 ******************************************************************************************************************************************/ int32_t WDT_GetValue(WDT_TypeDef *WDTx) @@ -100,10 +102,10 @@ int32_t WDT_GetValue(WDT_TypeDef *WDTx) return WDTx->VALUE; } -/****************************************************************************************************************************************** -* 函数名称: WDT_INTClr() -* 功能说明: 中断标志清除 -* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT +/****************************************************************************************************************************************** +* 函数名称: WDT_INTClr() +* 功能说明: 中断标志清除 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT * 输 出: 无 * 注意事项: 无 ******************************************************************************************************************************************/ @@ -112,11 +114,11 @@ void WDT_INTClr(WDT_TypeDef *WDTx) WDTx->IF = 1; } -/****************************************************************************************************************************************** -* 函数名称: WDT_INTStat() -* 功能说明: 中断状态查询 -* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT -* 输 出: int32_t 1 发生中断溢出 0 未发生中断溢出 +/****************************************************************************************************************************************** +* 函数名称: WDT_INTStat() +* 功能说明: 中断状态查询 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗，有效值包括WDT +* 输 出: int32_t 1 发生中断溢出 0 未发生中断溢出 * 注意事项: 无 ******************************************************************************************************************************************/ uint32_t WDT_INTStat(WDT_TypeDef *WDTx) diff --git a/bsp/swm320/project.uvoptx b/bsp/swm320/project.uvoptx index 37db9be0cd..523fd90078 100644 --- a/bsp/swm320/project.uvoptx +++ b/bsp/swm320/project.uvoptx @@ -207,8 +207,8 @@ 0 0 0 - ..\..\libcpu\arm\common\backtrace.c - backtrace.c + ..\..\libcpu\arm\common\showmem.c + showmem.c 0 0 @@ -231,8 +231,8 @@ 0 0 0 - ..\..\libcpu\arm\common\showmem.c - showmem.c + ..\..\libcpu\arm\common\backtrace.c + backtrace.c 0 0 @@ -311,8 +311,8 @@ 0 0 0 - ..\..\components\drivers\src\dataqueue.c - dataqueue.c + ..\..\components\drivers\src\ringbuffer.c + ringbuffer.c 0 0 @@ -323,23 +323,23 @@ 0 0 0 - ..\..\components\drivers\src\pipe.c - pipe.c - 0 - 0 - - - 3 - 12 - 1 - 0 - 0 - 0 ..\..\components\drivers\src\ringblk_buf.c ringblk_buf.c 0 0 + + 3 + 12 + 1 + 0 + 0 + 0 + ..\..\components\drivers\src\pipe.c + pipe.c + 0 + 0 + 3 13 @@ -347,8 +347,8 @@ 0 0 0 - ..\..\components\drivers\src\ringbuffer.c - ringbuffer.c + ..\..\components\drivers\src\waitqueue.c + waitqueue.c 0 0 @@ -359,8 +359,8 @@ 0 0 0 - ..\..\components\drivers\src\waitqueue.c - waitqueue.c + ..\..\components\drivers\src\dataqueue.c + dataqueue.c 0 0 @@ -391,8 +391,8 @@ 0 0 0 - drivers\board.c - board.c + drivers\drv_gpio.c + drv_gpio.c 0 0 @@ -415,15 +415,15 @@ 0 0 0 - drivers\drv_gpio.c - drv_gpio.c + drivers\board.c + board.c 0 0 - finsh + Finsh 0 0 0 @@ -447,8 +447,8 @@ 0 0 0 - ..\..\components\finsh\cmd.c - cmd.c + ..\..\components\finsh\msh.c + msh.c 0 0 @@ -459,128 +459,8 @@ 0 0 0 - ..\..\components\finsh\msh.c - msh.c - 0 - 0 - - - 5 - 22 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_compiler.c - finsh_compiler.c - 0 - 0 - - - 5 - 23 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_error.c - finsh_error.c - 0 - 0 - - - 5 - 24 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_heap.c - finsh_heap.c - 0 - 0 - - - 5 - 25 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_init.c - finsh_init.c - 0 - 0 - - - 5 - 26 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_node.c - finsh_node.c - 0 - 0 - - - 5 - 27 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_ops.c - finsh_ops.c - 0 - 0 - - - 5 - 28 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_parser.c - finsh_parser.c - 0 - 0 - - - 5 - 29 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_var.c - finsh_var.c - 0 - 0 - - - 5 - 30 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_vm.c - finsh_vm.c - 0 - 0 - - - 5 - 31 - 1 - 0 - 0 - 0 - ..\..\components\finsh\finsh_token.c - finsh_token.c + ..\..\components\finsh\cmd.c + cmd.c 0 0 @@ -594,103 +474,7 @@ 0 6 - 32 - 1 - 0 - 0 - 0 - ..\..\src\clock.c - clock.c - 0 - 0 - - - 6 - 33 - 1 - 0 - 0 - 0 - ..\..\src\components.c - components.c - 0 - 0 - - - 6 - 34 - 1 - 0 - 0 - 0 - ..\..\src\device.c - device.c - 0 - 0 - - - 6 - 35 - 1 - 0 - 0 - 0 - ..\..\src\idle.c - idle.c - 0 - 0 - - - 6 - 36 - 1 - 0 - 0 - 0 - ..\..\src\ipc.c - ipc.c - 0 - 0 - - - 6 - 37 - 1 - 0 - 0 - 0 - ..\..\src\irq.c - irq.c - 0 - 0 - - - 6 - 38 - 1 - 0 - 0 - 0 - ..\..\src\kservice.c - kservice.c - 0 - 0 - - - 6 - 39 - 1 - 0 - 0 - 0 - ..\..\src\memheap.c - memheap.c - 0 - 0 - - - 6 - 40 + 22 1 0 0 @@ -702,31 +486,7 @@ 6 - 41 - 1 - 0 - 0 - 0 - ..\..\src\object.c - object.c - 0 - 0 - - - 6 - 42 - 1 - 0 - 0 - 0 - ..\..\src\scheduler.c - scheduler.c - 0 - 0 - - - 6 - 43 + 23 1 0 0 @@ -738,7 +498,43 @@ 6 - 44 + 24 + 1 + 0 + 0 + 0 + ..\..\src\idle.c + idle.c + 0 + 0 + + + 6 + 25 + 1 + 0 + 0 + 0 + ..\..\src\ipc.c + ipc.c + 0 + 0 + + + 6 + 26 + 1 + 0 + 0 + 0 + ..\..\src\irq.c + irq.c + 0 + 0 + + + 6 + 27 1 0 0 @@ -748,6 +544,90 @@ 0 0 + + 6 + 28 + 1 + 0 + 0 + 0 + ..\..\src\device.c + device.c + 0 + 0 + + + 6 + 29 + 1 + 0 + 0 + 0 + ..\..\src\kservice.c + kservice.c + 0 + 0 + + + 6 + 30 + 1 + 0 + 0 + 0 + ..\..\src\components.c + components.c + 0 + 0 + + + 6 + 31 + 1 + 0 + 0 + 0 + ..\..\src\scheduler.c + scheduler.c + 0 + 0 + + + 6 + 32 + 1 + 0 + 0 + 0 + ..\..\src\object.c + object.c + 0 + 0 + + + 6 + 33 + 1 + 0 + 0 + 0 + ..\..\src\memheap.c + memheap.c + 0 + 0 + + + 6 + 34 + 1 + 0 + 0 + 0 + ..\..\src\clock.c + clock.c + 0 + 0 + @@ -758,19 +638,7 @@ 0 7 - 45 - 1 - 0 - 0 - 0 - ..\..\components\libc\compilers\armlibc\libc.c - libc.c - 0 - 0 - - - 7 - 46 + 35 1 0 0 @@ -782,7 +650,7 @@ 7 - 47 + 36 1 0 0 @@ -794,19 +662,19 @@ 7 - 48 + 37 1 0 0 0 - ..\..\components\libc\compilers\common\stdlib.c - stdlib.c + ..\..\components\libc\compilers\armlibc\libc.c + libc.c 0 0 7 - 49 + 38 1 0 0 @@ -816,6 +684,18 @@ 0 0 + + 7 + 39 + 1 + 0 + 0 + 0 + ..\..\components\libc\compilers\common\stdlib.c + stdlib.c + 0 + 0 + @@ -826,7 +706,19 @@ 0 8 - 50 + 40 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_wdt.c + SWM320_wdt.c + 0 + 0 + + + 8 + 41 1 0 0 @@ -838,13 +730,121 @@ 8 - 51 + 42 1 0 0 0 - libraries\SWM320_StdPeriph_Driver\SWM320_adc.c - SWM320_adc.c + libraries\SWM320_StdPeriph_Driver\SWM320_spi.c + SWM320_spi.c + 0 + 0 + + + 8 + 43 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_flash.c + SWM320_flash.c + 0 + 0 + + + 8 + 44 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_sdram.c + SWM320_sdram.c + 0 + 0 + + + 8 + 45 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_pwm.c + SWM320_pwm.c + 0 + 0 + + + 8 + 46 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_sram.c + SWM320_sram.c + 0 + 0 + + + 8 + 47 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_lcd.c + SWM320_lcd.c + 0 + 0 + + + 8 + 48 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_gpio.c + SWM320_gpio.c + 0 + 0 + + + 8 + 49 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_timr.c + SWM320_timr.c + 0 + 0 + + + 8 + 50 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_norflash.c + SWM320_norflash.c + 0 + 0 + + + 8 + 51 + 2 + 0 + 0 + 0 + libraries\CMSIS\DeviceSupport\startup\arm\startup_SWM320.s + startup_SWM320.s 0 0 @@ -867,66 +867,6 @@ 0 0 0 - libraries\SWM320_StdPeriph_Driver\SWM320_crc.c - SWM320_crc.c - 0 - 0 - - - 8 - 54 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_dma.c - SWM320_dma.c - 0 - 0 - - - 8 - 55 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_exti.c - SWM320_exti.c - 0 - 0 - - - 8 - 56 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_flash.c - SWM320_flash.c - 0 - 0 - - - 8 - 57 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_gpio.c - SWM320_gpio.c - 0 - 0 - - - 8 - 58 - 1 - 0 - 0 - 0 libraries\SWM320_StdPeriph_Driver\SWM320_i2c.c SWM320_i2c.c 0 @@ -934,31 +874,7 @@ 8 - 59 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_lcd.c - SWM320_lcd.c - 0 - 0 - - - 8 - 60 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_norflash.c - SWM320_norflash.c - 0 - 0 - - - 8 - 61 + 54 1 0 0 @@ -970,91 +886,7 @@ 8 - 62 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_pwm.c - SWM320_pwm.c - 0 - 0 - - - 8 - 63 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_rtc.c - SWM320_rtc.c - 0 - 0 - - - 8 - 64 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_sdio.c - SWM320_sdio.c - 0 - 0 - - - 8 - 65 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_sdram.c - SWM320_sdram.c - 0 - 0 - - - 8 - 66 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_spi.c - SWM320_spi.c - 0 - 0 - - - 8 - 67 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_sram.c - SWM320_sram.c - 0 - 0 - - - 8 - 68 - 1 - 0 - 0 - 0 - libraries\SWM320_StdPeriph_Driver\SWM320_timr.c - SWM320_timr.c - 0 - 0 - - - 8 - 69 + 55 1 0 0 @@ -1066,25 +898,73 @@ 8 - 70 + 56 1 0 0 0 - libraries\SWM320_StdPeriph_Driver\SWM320_wdt.c - SWM320_wdt.c + libraries\SWM320_StdPeriph_Driver\SWM320_dma.c + SWM320_dma.c 0 0 8 - 71 - 2 + 57 + 1 0 0 0 - libraries\CMSIS\DeviceSupport\startup\arm\startup_SWM320.s - startup_SWM320.s + libraries\SWM320_StdPeriph_Driver\SWM320_crc.c + SWM320_crc.c + 0 + 0 + + + 8 + 58 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_sdio.c + SWM320_sdio.c + 0 + 0 + + + 8 + 59 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_rtc.c + SWM320_rtc.c + 0 + 0 + + + 8 + 60 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_exti.c + SWM320_exti.c + 0 + 0 + + + 8 + 61 + 1 + 0 + 0 + 0 + libraries\SWM320_StdPeriph_Driver\SWM320_adc.c + SWM320_adc.c 0 0 diff --git a/bsp/swm320/project.uvprojx b/bsp/swm320/project.uvprojx index f99301d47f..4c20f76b8f 100644 --- a/bsp/swm320/project.uvprojx +++ b/bsp/swm320/project.uvprojx @@ -10,13 +10,13 @@ rtthread 0x4 ARM-ADS - 5060960::V5.06 update 7 (build 960)::.\ARMCC + 5060750::V5.06 update 6 (build 750)::ARMCC 0 SWM320xE Synwit - Synwit.SWM32_DFP.1.11.3 + Synwit.SWM32_DFP.1.16.6 http://www.synwit.com/pack IRAM(0x20000000,0x20000) IROM(0x00000000,0x80000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE @@ -339,7 +339,7 @@ RT_USING_ARM_LIBC, __RTTHREAD__, __CLK_TCK=RT_TICK_PER_SECOND - applications;..\..\libcpu\arm\common;..\..\libcpu\arm\cortex-m4;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;drivers;..\..\components\finsh;.;..\..\include;..\..\components\libc\compilers\armlibc;..\..\components\libc\compilers\common;libraries\CMSIS\CoreSupport;libraries\CMSIS\DeviceSupport;libraries\SWM320_StdPeriph_Driver + applications;..\..\libcpu\arm\common;..\..\libcpu\arm\cortex-m4;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;drivers;..\..\components\finsh;.;..\..\include;..\..\components\libc\compilers\armlibc;..\..\components\libc\compilers\common;..\..\components\libc\compilers\common\none-gcc;libraries\CMSIS\CoreSupport;libraries\CMSIS\DeviceSupport;libraries\SWM320_StdPeriph_Driver;..\..\examples\utest\testcases\kernel @@ -394,9 +394,9 @@ CPU - backtrace.c + showmem.c 1 - ..\..\libcpu\arm\common\backtrace.c + ..\..\libcpu\arm\common\showmem.c div0.c @@ -404,9 +404,9 @@ ..\..\libcpu\arm\common\div0.c - showmem.c + backtrace.c 1 - ..\..\libcpu\arm\common\showmem.c + ..\..\libcpu\arm\common\backtrace.c cpuport.c @@ -439,14 +439,9 @@ ..\..\components\drivers\src\completion.c - dataqueue.c + ringbuffer.c 1 - ..\..\components\drivers\src\dataqueue.c - - - pipe.c - 1 - ..\..\components\drivers\src\pipe.c + ..\..\components\drivers\src\ringbuffer.c ringblk_buf.c @@ -454,15 +449,20 @@ ..\..\components\drivers\src\ringblk_buf.c - ringbuffer.c + pipe.c 1 - ..\..\components\drivers\src\ringbuffer.c + ..\..\components\drivers\src\pipe.c waitqueue.c 1 ..\..\components\drivers\src\waitqueue.c + + dataqueue.c + 1 + ..\..\components\drivers\src\dataqueue.c + workqueue.c 1 @@ -474,9 +474,9 @@ Drivers - board.c + drv_gpio.c 1 - drivers\board.c + drivers\drv_gpio.c drv_uart.c @@ -484,79 +484,29 @@ drivers\drv_uart.c - drv_gpio.c + board.c 1 - drivers\drv_gpio.c + drivers\board.c - finsh + Finsh shell.c 1 ..\..\components\finsh\shell.c - - cmd.c - 1 - ..\..\components\finsh\cmd.c - msh.c 1 ..\..\components\finsh\msh.c - finsh_compiler.c + cmd.c 1 - ..\..\components\finsh\finsh_compiler.c - - - finsh_error.c - 1 - ..\..\components\finsh\finsh_error.c - - - finsh_heap.c - 1 - ..\..\components\finsh\finsh_heap.c - - - finsh_init.c - 1 - ..\..\components\finsh\finsh_init.c - - - finsh_node.c - 1 - ..\..\components\finsh\finsh_node.c - - - finsh_ops.c - 1 - ..\..\components\finsh\finsh_ops.c - - - finsh_parser.c - 1 - ..\..\components\finsh\finsh_parser.c - - - finsh_var.c - 1 - ..\..\components\finsh\finsh_var.c - - - finsh_vm.c - 1 - ..\..\components\finsh\finsh_vm.c - - - finsh_token.c - 1 - ..\..\components\finsh\finsh_token.c + ..\..\components\finsh\cmd.c @@ -564,19 +514,14 @@ Kernel - clock.c + mempool.c 1 - ..\..\src\clock.c + ..\..\src\mempool.c - components.c + thread.c 1 - ..\..\src\components.c - - - device.c - 1 - ..\..\src\device.c + ..\..\src\thread.c idle.c @@ -593,25 +538,25 @@ 1 ..\..\src\irq.c + + timer.c + 1 + ..\..\src\timer.c + + + device.c + 1 + ..\..\src\device.c + kservice.c 1 ..\..\src\kservice.c - memheap.c + components.c 1 - ..\..\src\memheap.c - - - mempool.c - 1 - ..\..\src\mempool.c - - - object.c - 1 - ..\..\src\object.c + ..\..\src\components.c scheduler.c @@ -619,25 +564,25 @@ ..\..\src\scheduler.c - thread.c + object.c 1 - ..\..\src\thread.c + ..\..\src\object.c - timer.c + memheap.c 1 - ..\..\src\timer.c + ..\..\src\memheap.c + + + clock.c + 1 + ..\..\src\clock.c libc - - libc.c - 1 - ..\..\components\libc\compilers\armlibc\libc.c - mem_std.c 1 @@ -649,130 +594,135 @@ ..\..\components\libc\compilers\armlibc\syscalls.c - stdlib.c + libc.c 1 - ..\..\components\libc\compilers\common\stdlib.c + ..\..\components\libc\compilers\armlibc\libc.c time.c 1 ..\..\components\libc\compilers\common\time.c + + stdlib.c + 1 + ..\..\components\libc\compilers\common\stdlib.c + Libraries + + SWM320_wdt.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_wdt.c + system_SWM320.c 1 libraries\CMSIS\DeviceSupport\system_SWM320.c - - SWM320_adc.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_adc.c - - - SWM320_can.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_can.c - - - SWM320_crc.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_crc.c - - - SWM320_dma.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_dma.c - - - SWM320_exti.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_exti.c - - - SWM320_flash.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_flash.c - - - SWM320_gpio.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_gpio.c - - - SWM320_i2c.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_i2c.c - - - SWM320_lcd.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_lcd.c - - - SWM320_norflash.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_norflash.c - - - SWM320_port.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_port.c - - - SWM320_pwm.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_pwm.c - - - SWM320_rtc.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_rtc.c - - - SWM320_sdio.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_sdio.c - - - SWM320_sdram.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_sdram.c - SWM320_spi.c 1 libraries\SWM320_StdPeriph_Driver\SWM320_spi.c + + SWM320_flash.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_flash.c + + + SWM320_sdram.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_sdram.c + + + SWM320_pwm.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_pwm.c + SWM320_sram.c 1 libraries\SWM320_StdPeriph_Driver\SWM320_sram.c + + SWM320_lcd.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_lcd.c + + + SWM320_gpio.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_gpio.c + SWM320_timr.c 1 libraries\SWM320_StdPeriph_Driver\SWM320_timr.c - SWM320_uart.c + SWM320_norflash.c 1 - libraries\SWM320_StdPeriph_Driver\SWM320_uart.c - - - SWM320_wdt.c - 1 - libraries\SWM320_StdPeriph_Driver\SWM320_wdt.c + libraries\SWM320_StdPeriph_Driver\SWM320_norflash.c startup_SWM320.s 2 libraries\CMSIS\DeviceSupport\startup\arm\startup_SWM320.s + + SWM320_can.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_can.c + + + SWM320_i2c.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_i2c.c + + + SWM320_port.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_port.c + + + SWM320_uart.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_uart.c + + + SWM320_dma.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_dma.c + + + SWM320_crc.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_crc.c + + + SWM320_sdio.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_sdio.c + + + SWM320_rtc.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_rtc.c + + + SWM320_exti.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_exti.c + + + SWM320_adc.c + 1 + libraries\SWM320_StdPeriph_Driver\SWM320_adc.c + diff --git a/bsp/swm320/rtconfig.h b/bsp/swm320/rtconfig.h index 91d579f1b0..7955869a2b 100644 --- a/bsp/swm320/rtconfig.h +++ b/bsp/swm320/rtconfig.h @@ -16,6 +16,9 @@ #define RT_USING_IDLE_HOOK #define RT_IDLE_HOOK_LIST_SIZE 4 #define IDLE_THREAD_STACK_SIZE 256 + +/* kservice optimization */ + #define RT_DEBUG #define RT_DEBUG_COLOR @@ -39,8 +42,8 @@ #define RT_USING_DEVICE #define RT_USING_CONSOLE #define RT_CONSOLEBUF_SIZE 128 -#define RT_CONSOLE_DEVICE_NAME "uart0" -#define RT_VER_NUM 0x40003 +#define RT_CONSOLE_DEVICE_NAME "uart1" +#define RT_VER_NUM 0x40004 #define ARCH_ARM #define RT_USING_CPU_FFS #define ARCH_ARM_CORTEX_M @@ -59,16 +62,17 @@ /* Command shell */ #define RT_USING_FINSH +#define RT_USING_MSH +#define FINSH_USING_MSH #define FINSH_THREAD_NAME "tshell" +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 #define FINSH_USING_HISTORY #define FINSH_HISTORY_LINES 5 #define FINSH_USING_SYMTAB -#define FINSH_USING_DESCRIPTION -#define FINSH_THREAD_PRIORITY 20 -#define FINSH_THREAD_STACK_SIZE 4096 #define FINSH_CMD_SIZE 80 -#define FINSH_USING_MSH -#define FINSH_USING_MSH_DEFAULT +#define MSH_USING_BUILT_IN_COMMANDS +#define FINSH_USING_DESCRIPTION #define FINSH_ARG_MAX 10 /* Device virtual file system */ @@ -79,6 +83,7 @@ #define RT_USING_DEVICE_IPC #define RT_PIPE_BUFSZ 512 #define RT_USING_SERIAL +#define RT_USING_SERIAL_V1 #define RT_SERIAL_RB_BUFSZ 64 #define RT_USING_PIN @@ -88,6 +93,7 @@ /* POSIX layer and C standard library */ #define RT_USING_LIBC +#define RT_LIBC_DEFAULT_TIMEZONE 8 /* Network */ @@ -109,6 +115,9 @@ /* Utilities */ +/* RT-Thread Utestcases */ + + /* RT-Thread online packages */ /* IoT - internet of things */ @@ -139,6 +148,8 @@ /* system packages */ +/* acceleration: Assembly language or algorithmic acceleration packages */ + /* Micrium: Micrium software products porting for RT-Thread */ @@ -146,13 +157,15 @@ /* peripheral libraries and drivers */ -/* miscellaneous packages */ +/* AI packages */ +/* miscellaneous packages */ + /* samples: kernel and components samples */ -/* games: games run on RT-Thread console */ +/* entertainment: terminal games and other interesting software packages */ /* Hardware Drivers Config */ @@ -162,7 +175,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_UART -#define BSP_USING_UART0 +#define BSP_USING_UART1 #define BSP_USING_GPIO /* Onboard Peripheral Drivers */