mirror of
https://github.com/RT-Thread/rt-thread.git
synced 2026-09-24 22:04:54 +08:00
[bsp][stm32]Add stm32l431-tencentos-tiny-EVB_MX+ remaining drivers
This commit is contained in:
Ruixuan Zhang
@@ -491,6 +491,9 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
||||
# CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
|
||||
#
|
||||
# CONFIG_PKG_USING_CMSIS_5 is not set
|
||||
# CONFIG_PKG_USING_CMSIS_CORE is not set
|
||||
# CONFIG_PKG_USING_CMSIS_DSP is not set
|
||||
# CONFIG_PKG_USING_CMSIS_NN is not set
|
||||
# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
|
||||
# CONFIG_PKG_USING_CMSIS_RTOS2 is not set
|
||||
|
||||
@@ -562,6 +565,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
||||
#
|
||||
# STM32 HAL & SDK Drivers
|
||||
#
|
||||
# CONFIG_PKG_USING_STM32L4XX_HAL_DRIVER is not set
|
||||
# CONFIG_PKG_USING_STM32WB55_SDK is not set
|
||||
# CONFIG_PKG_USING_STM32_SDIO is not set
|
||||
# CONFIG_PKG_USING_BLUETRUM_SDK is not set
|
||||
@@ -729,6 +733,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
||||
# CONFIG_PKG_USING_X9555 is not set
|
||||
# CONFIG_PKG_USING_SYSTEM_RUN_LED is not set
|
||||
# CONFIG_PKG_USING_BT_MX01 is not set
|
||||
# CONFIG_PKG_USING_RGPOWER is not set
|
||||
# CONFIG_PKG_USING_SPI_TOOLS is not set
|
||||
|
||||
#
|
||||
@@ -753,7 +758,6 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
||||
# CONFIG_PKG_USING_UKAL is not set
|
||||
# CONFIG_PKG_USING_DIGITALCTRL is not set
|
||||
# CONFIG_PKG_USING_KISSFFT is not set
|
||||
# CONFIG_PKG_USING_CMSIS_DSP is not set
|
||||
|
||||
#
|
||||
# miscellaneous packages
|
||||
@@ -1060,7 +1064,17 @@ CONFIG_SOC_STM32L431RC=y
|
||||
#
|
||||
CONFIG_BSP_USING_GPIO=y
|
||||
CONFIG_BSP_USING_UART=y
|
||||
# CONFIG_BSP_USING_UART1 is not set
|
||||
CONFIG_BSP_USING_UART2=y
|
||||
# CONFIG_BSP_USING_UART3 is not set
|
||||
# CONFIG_BSP_USING_LPUART1 is not set
|
||||
# CONFIG_BSP_USING_ADC is not set
|
||||
# CONFIG_BSP_USING_ONCHIP_RTC is not set
|
||||
# CONFIG_BSP_USING_DAC is not set
|
||||
# CONFIG_BSP_USING_SPI is not set
|
||||
# CONFIG_BSP_USING_QSPI_FLASH is not set
|
||||
# CONFIG_BSP_USING_SDCARD is not set
|
||||
# CONFIG_BSP_USING_I2C1 is not set
|
||||
# CONFIG_BSP_USING_CRC is not set
|
||||
# CONFIG_BSP_USING_RNG is not set
|
||||
# CONFIG_BSP_USING_UDID is not set
|
||||
|
||||
@@ -43,18 +43,17 @@ tiny 提供精简的 RTOS 内核，内核组件可裁剪可配置，可快速移
|
||||
| **板载外设** | **支持情况** | **备注** |
|
||||
|:---------------|:---------:|:--------------------------------------|
|
||||
| USB 转串口 | 支持 | 默认Finsh串口输出端，连接至UART2 |
|
||||
| SPI Flash | 暂不支持 | |
|
||||
| 以太网 | 暂不支持 | |
|
||||
| SD卡 | 暂不支持 | |
|
||||
| CAN | 暂不支持 | |
|
||||
| QSPI Flash | 支持 | |
|
||||
| SD卡 | 支持 | |
|
||||
| **片上外设** | **支持情况** | **备注** |
|
||||
| GPIO | 支持 | PA0, PA1... PK15 ---> PIN: 0, 1...176 |
|
||||
| UART | 支持 | LPUART1/UART2/x |
|
||||
| SPI | 暂不支持 | SPI1/x/x |
|
||||
| I2C | 暂不支持 | 软件 I2C |
|
||||
| SDIO | 暂不支持 | 即将支持 |
|
||||
| RTC | 暂不支持 | 即将支持 |
|
||||
| PWM | 暂不支持 | 即将支持 |
|
||||
| SPI | 支持 | SPI1/3 |
|
||||
| I2C | 支持 | 软件 I2C |
|
||||
| SDIO | 支持 | |
|
||||
| RTC | 支持 | LSE |
|
||||
|ADC|支持|ADC1,(E53 LAN Interface)
|
||||
|DAC |支持|DAC1,(E53 LAN Interface)
|
||||
| **扩展模块** | **支持情况** | **备注** |
|
||||
| GPS模块 | 暂不支持 | 即将支持 |
|
||||
| BC35-G模块 | 暂不支持 | 即将支持 |
|
||||
@@ -106,7 +105,7 @@ msh >
|
||||
|
||||
### 进阶使用
|
||||
|
||||
此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
|
||||
此 BSP 默认只开启了 GPIO 和 UART2 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
|
||||
|
||||
1. 在 bsp 下打开 env 工具。
|
||||
|
||||
|
||||
@@ -12,6 +12,8 @@
|
||||
#include <rtdevice.h>
|
||||
#include <board.h>
|
||||
|
||||
|
||||
|
||||
/* defined the LED0 pin: PC13 */
|
||||
#define LED0_PIN GET_PIN(C, 13)
|
||||
|
||||
|
||||
File diff suppressed because one or more lines are too long
+71
-87
@@ -25,7 +25,7 @@
|
||||
#define STM32L4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
@@ -36,14 +36,14 @@ extern "C" {
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
/*#define HAL_ADC_MODULE_ENABLED */
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_CAN_MODULE_ENABLED */
|
||||
/*#define HAL_COMP_MODULE_ENABLED */
|
||||
/*#define HAL_I2C_MODULE_ENABLED */
|
||||
/*#define HAL_CRC_MODULE_ENABLED */
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_DAC_MODULE_ENABLED */
|
||||
#define HAL_DAC_MODULE_ENABLED
|
||||
/*#define HAL_DCMI_MODULE_ENABLED */
|
||||
/*#define HAL_DMA2D_MODULE_ENABLED */
|
||||
/*#define HAL_DFSDM_MODULE_ENABLED */
|
||||
@@ -67,14 +67,14 @@ extern "C" {
|
||||
/*#define HAL_PCD_MODULE_ENABLED */
|
||||
/*#define HAL_PKA_MODULE_ENABLED */
|
||||
/*#define HAL_QSPI_MODULE_ENABLED */
|
||||
/*#define HAL_QSPI_MODULE_ENABLED */
|
||||
#define HAL_QSPI_MODULE_ENABLED
|
||||
/*#define HAL_RNG_MODULE_ENABLED */
|
||||
/*#define HAL_RTC_MODULE_ENABLED */
|
||||
#define HAL_RTC_MODULE_ENABLED
|
||||
/*#define HAL_SAI_MODULE_ENABLED */
|
||||
/*#define HAL_SD_MODULE_ENABLED */
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
/*#define HAL_SMBUS_MODULE_ENABLED */
|
||||
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/*#define HAL_SPI_MODULE_ENABLED */
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
/*#define HAL_SRAM_MODULE_ENABLED */
|
||||
/*#define HAL_SWPMI_MODULE_ENABLED */
|
||||
/*#define HAL_TIM_MODULE_ENABLED */
|
||||
@@ -99,11 +99,11 @@ extern "C" {
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
@@ -111,7 +111,7 @@ extern "C" {
|
||||
* This value is the default MSI range value after Reset.
|
||||
*/
|
||||
#if !defined (MSI_VALUE)
|
||||
#define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* MSI_VALUE */
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
@@ -119,7 +119,7 @@ extern "C" {
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
@@ -130,7 +130,7 @@ extern "C" {
|
||||
* which is subject to manufacturing process variations.
|
||||
*/
|
||||
#if !defined (HSI48_VALUE)
|
||||
#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
|
||||
#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
|
||||
The real value my vary depending on manufacturing process variations.*/
|
||||
#endif /* HSI48_VALUE */
|
||||
|
||||
@@ -138,7 +138,7 @@ extern "C" {
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
@@ -148,11 +148,11 @@ extern "C" {
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
@@ -161,7 +161,7 @@ extern "C" {
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
|
||||
#define EXTERNAL_SAI1_CLOCK_VALUE 2097000U /*!< Value of the SAI1 External clock source in Hz*/
|
||||
#define EXTERNAL_SAI1_CLOCK_VALUE 2097000U /*!< Value of the SAI1 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
|
||||
|
||||
/**
|
||||
@@ -170,7 +170,7 @@ extern "C" {
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
|
||||
#define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/
|
||||
#define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
@@ -181,7 +181,7 @@ extern "C" {
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 0U
|
||||
@@ -255,223 +255,207 @@ extern "C" {
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
|
||||
#include "stm32l4xx_hal_rcc.h"
|
||||
|
||||
#include "stm32l4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
|
||||
#include "stm32l4xx_hal_gpio.h"
|
||||
|
||||
#include "stm32l4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
|
||||
#include "stm32l4xx_hal_dma.h"
|
||||
|
||||
#include "stm32l4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dfsdm.h"
|
||||
#include "stm32l4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
|
||||
#include "stm32l4xx_hal_cortex.h"
|
||||
|
||||
#include "stm32l4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_adc.h"
|
||||
#include "stm32l4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_can.h"
|
||||
#include "stm32l4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "Legacy/stm32l4xx_hal_can_legacy.h"
|
||||
#include "Legacy/stm32l4xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_COMP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_comp.h"
|
||||
#include "stm32l4xx_hal_comp.h"
|
||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_crc.h"
|
||||
#include "stm32l4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_cryp.h"
|
||||
#include "stm32l4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dac.h"
|
||||
#include "stm32l4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dcmi.h"
|
||||
#include "stm32l4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dma2d.h"
|
||||
#include "stm32l4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dsi.h"
|
||||
#include "stm32l4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
|
||||
#include "stm32l4xx_hal_exti.h"
|
||||
|
||||
#include "stm32l4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GFXMMU_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_gfxmmu.h"
|
||||
#include "stm32l4xx_hal_gfxmmu.h"
|
||||
#endif /* HAL_GFXMMU_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FIREWALL_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_firewall.h"
|
||||
#include "stm32l4xx_hal_firewall.h"
|
||||
#endif /* HAL_FIREWALL_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
|
||||
#include "stm32l4xx_hal_flash.h"
|
||||
|
||||
#include "stm32l4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_hash.h"
|
||||
#include "stm32l4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_hcd.h"
|
||||
#include "stm32l4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_i2c.h"
|
||||
#include "stm32l4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_irda.h"
|
||||
#include "stm32l4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_iwdg.h"
|
||||
#include "stm32l4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_lcd.h"
|
||||
#include "stm32l4xx_hal_lcd.h"
|
||||
#endif /* HAL_LCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_lptim.h"
|
||||
#include "stm32l4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_ltdc.h"
|
||||
#include "stm32l4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_mmc.h"
|
||||
#include "stm32l4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_nand.h"
|
||||
#include "stm32l4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_nor.h"
|
||||
#include "stm32l4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OPAMP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_opamp.h"
|
||||
#include "stm32l4xx_hal_opamp.h"
|
||||
#endif /* HAL_OPAMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_ospi.h"
|
||||
#include "stm32l4xx_hal_ospi.h"
|
||||
#endif /* HAL_OSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pcd.h"
|
||||
#include "stm32l4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PKA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pka.h"
|
||||
#include "stm32l4xx_hal_pka.h"
|
||||
#endif /* HAL_PKA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PSSI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pssi.h"
|
||||
#include "stm32l4xx_hal_pssi.h"
|
||||
#endif /* HAL_PSSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
|
||||
#include "stm32l4xx_hal_pwr.h"
|
||||
|
||||
#include "stm32l4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_qspi.h"
|
||||
#include "stm32l4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rng.h"
|
||||
#include "stm32l4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rtc.h"
|
||||
#include "stm32l4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sai.h"
|
||||
#include "stm32l4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sd.h"
|
||||
#include "stm32l4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_smartcard.h"
|
||||
#include "stm32l4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_smbus.h"
|
||||
#include "stm32l4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_spi.h"
|
||||
#include "stm32l4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sram.h"
|
||||
#include "stm32l4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SWPMI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_swpmi.h"
|
||||
#include "stm32l4xx_hal_swpmi.h"
|
||||
#endif /* HAL_SWPMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_tim.h"
|
||||
#include "stm32l4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TSC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_tsc.h"
|
||||
#include "stm32l4xx_hal_tsc.h"
|
||||
#endif /* HAL_TSC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
|
||||
#include "stm32l4xx_hal_uart.h"
|
||||
|
||||
#include "stm32l4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_usart.h"
|
||||
#include "stm32l4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_wwdg.h"
|
||||
#include "stm32l4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
@@ -484,11 +468,11 @@ extern "C" {
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
|
||||
+1
-9
@@ -22,7 +22,7 @@
|
||||
#define __STM32L4xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
@@ -47,21 +47,13 @@ extern "C" {
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
|
||||
void HardFault_Handler(void);
|
||||
|
||||
void MemManage_Handler(void);
|
||||
|
||||
void BusFault_Handler(void);
|
||||
|
||||
void UsageFault_Handler(void);
|
||||
|
||||
void SVC_Handler(void);
|
||||
|
||||
void DebugMon_Handler(void);
|
||||
|
||||
void PendSV_Handler(void);
|
||||
|
||||
void SysTick_Handler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
|
||||
+687
-54
File diff suppressed because it is too large
Load Diff
+67
-54
@@ -66,115 +66,128 @@
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void) {
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
while (1) {
|
||||
}
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void) {
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1) {
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void) {
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1) {
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Prefetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void) {
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1) {
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void) {
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1) {
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void) {
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void) {
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void) {
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void) {
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
|
||||
@@ -1,4 +1,12 @@
|
||||
#MicroXplorer Configuration settings - do not modify
|
||||
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_3
|
||||
ADC1.CommonPathInternal=null|null|null|null
|
||||
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag,CommonPathInternal
|
||||
ADC1.NbrOfConversionFlag=1
|
||||
ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||
ADC1.Rank-0\#ChannelRegularConversion=1
|
||||
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
|
||||
ADC1.master=1
|
||||
CAD.formats=
|
||||
CAD.pinconfig=
|
||||
CAD.provider=
|
||||
@@ -7,27 +15,61 @@ GPIO.groupedBy=
|
||||
KeepUserPlacement=false
|
||||
Mcu.CPN=STM32L431RCT6
|
||||
Mcu.Family=STM32L4
|
||||
Mcu.IP0=NVIC
|
||||
Mcu.IP1=RCC
|
||||
Mcu.IP2=SYS
|
||||
Mcu.IP3=USART2
|
||||
Mcu.IPNb=4
|
||||
Mcu.IP0=ADC1
|
||||
Mcu.IP1=DAC1
|
||||
Mcu.IP10=SYS
|
||||
Mcu.IP11=USART1
|
||||
Mcu.IP12=USART2
|
||||
Mcu.IP13=USART3
|
||||
Mcu.IP2=LPUART1
|
||||
Mcu.IP3=NVIC
|
||||
Mcu.IP4=QUADSPI
|
||||
Mcu.IP5=RCC
|
||||
Mcu.IP6=RTC
|
||||
Mcu.IP7=SDMMC1
|
||||
Mcu.IP8=SPI1
|
||||
Mcu.IP9=SPI3
|
||||
Mcu.IPNb=14
|
||||
Mcu.Name=STM32L431R(B-C)Tx
|
||||
Mcu.Package=LQFP64
|
||||
Mcu.Pin0=PC13
|
||||
Mcu.Pin1=PH0-OSC_IN (PH0)
|
||||
Mcu.Pin2=PH1-OSC_OUT (PH1)
|
||||
Mcu.Pin3=PA2
|
||||
Mcu.Pin4=PA3
|
||||
Mcu.Pin5=PA13 (JTMS-SWDIO)
|
||||
Mcu.Pin6=PA14 (JTCK-SWCLK)
|
||||
Mcu.Pin7=VP_SYS_VS_Systick
|
||||
Mcu.PinsNb=8
|
||||
Mcu.Pin1=PC14-OSC32_IN (PC14)
|
||||
Mcu.Pin10=PA4
|
||||
Mcu.Pin11=PA6
|
||||
Mcu.Pin12=PC4
|
||||
Mcu.Pin13=PC5
|
||||
Mcu.Pin14=PB0
|
||||
Mcu.Pin15=PB1
|
||||
Mcu.Pin16=PB10
|
||||
Mcu.Pin17=PB11
|
||||
Mcu.Pin18=PC8
|
||||
Mcu.Pin19=PA9
|
||||
Mcu.Pin2=PC15-OSC32_OUT (PC15)
|
||||
Mcu.Pin20=PA10
|
||||
Mcu.Pin21=PA12
|
||||
Mcu.Pin22=PA13 (JTMS-SWDIO)
|
||||
Mcu.Pin23=PA14 (JTCK-SWCLK)
|
||||
Mcu.Pin24=PA15 (JTDI)
|
||||
Mcu.Pin25=PC10
|
||||
Mcu.Pin26=PC11
|
||||
Mcu.Pin27=PC12
|
||||
Mcu.Pin28=PD2
|
||||
Mcu.Pin29=PB5
|
||||
Mcu.Pin3=PH0-OSC_IN (PH0)
|
||||
Mcu.Pin30=VP_RTC_VS_RTC_Activate
|
||||
Mcu.Pin31=VP_SYS_VS_Systick
|
||||
Mcu.Pin4=PH1-OSC_OUT (PH1)
|
||||
Mcu.Pin5=PC1
|
||||
Mcu.Pin6=PC2
|
||||
Mcu.Pin7=PA1
|
||||
Mcu.Pin8=PA2
|
||||
Mcu.Pin9=PA3
|
||||
Mcu.PinsNb=32
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32L431RCTx
|
||||
MxCube.Version=6.9.2
|
||||
MxDb.Version=DB.6.0.92
|
||||
MxCube.Version=6.11.0
|
||||
MxDb.Version=DB.6.0.110
|
||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.ForceEnableDMAVector=true
|
||||
@@ -39,16 +81,61 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
|
||||
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
PA1.Mode=Full_Duplex_Master
|
||||
PA1.Signal=SPI1_SCK
|
||||
PA10.Mode=Asynchronous
|
||||
PA10.Signal=USART1_RX
|
||||
PA12.Locked=true
|
||||
PA12.Mode=Full_Duplex_Master
|
||||
PA12.Signal=SPI1_MOSI
|
||||
PA13\ (JTMS-SWDIO).Mode=Serial_Wire
|
||||
PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
|
||||
PA14\ (JTCK-SWCLK).Mode=Serial_Wire
|
||||
PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
|
||||
PA15\ (JTDI).Mode=Asynchronous
|
||||
PA15\ (JTDI).Signal=USART2_RX
|
||||
PA2.Mode=Asynchronous
|
||||
PA2.Signal=USART2_TX
|
||||
PA3.Mode=Asynchronous
|
||||
PA3.Signal=USART2_RX
|
||||
PA3.Mode=Single Bank 1 2IOs
|
||||
PA3.Signal=QUADSPI_CLK
|
||||
PA4.Signal=COMP_DAC11_group
|
||||
PA6.Mode=Full_Duplex_Master
|
||||
PA6.Signal=SPI1_MISO
|
||||
PA9.Mode=Asynchronous
|
||||
PA9.Signal=USART1_TX
|
||||
PB0.Mode=Single Bank 1 2IOs
|
||||
PB0.Signal=QUADSPI_BK1_IO1
|
||||
PB1.Mode=Single Bank 1 2IOs
|
||||
PB1.Signal=QUADSPI_BK1_IO0
|
||||
PB10.Mode=Asynchronous
|
||||
PB10.Signal=LPUART1_RX
|
||||
PB11.Mode=Single Bank 1 2IOs
|
||||
PB11.Signal=QUADSPI_BK1_NCS
|
||||
PB5.Mode=Full_Duplex_Master
|
||||
PB5.Signal=SPI3_MOSI
|
||||
PC1.Mode=Asynchronous
|
||||
PC1.Signal=LPUART1_TX
|
||||
PC10.Mode=Full_Duplex_Master
|
||||
PC10.Signal=SPI3_SCK
|
||||
PC11.Mode=Full_Duplex_Master
|
||||
PC11.Signal=SPI3_MISO
|
||||
PC12.Mode=SD_1_bit
|
||||
PC12.Signal=SDMMC1_CK
|
||||
PC13.Locked=true
|
||||
PC13.Signal=GPIO_Output
|
||||
PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
|
||||
PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
|
||||
PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
|
||||
PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
|
||||
PC2.Signal=ADCx_IN3
|
||||
PC4.Mode=Asynchronous
|
||||
PC4.Signal=USART3_TX
|
||||
PC5.Mode=Asynchronous
|
||||
PC5.Signal=USART3_RX
|
||||
PC8.Mode=SD_1_bit
|
||||
PC8.Signal=SDMMC1_D0
|
||||
PD2.Mode=SD_1_bit
|
||||
PD2.Signal=SDMMC1_CMD
|
||||
PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
|
||||
PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
|
||||
PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
|
||||
@@ -72,7 +159,7 @@ ProjectManager.LastFirmware=true
|
||||
ProjectManager.LibraryCopy=0
|
||||
ProjectManager.MainLocation=Core/Src
|
||||
ProjectManager.NoMain=false
|
||||
ProjectManager.PreviousToolchain=
|
||||
ProjectManager.PreviousToolchain=STM32CubeIDE
|
||||
ProjectManager.ProjectBuild=false
|
||||
ProjectManager.ProjectFileName=CubeMX_Config.ioc
|
||||
ProjectManager.ProjectName=CubeMX_Config
|
||||
@@ -84,7 +171,9 @@ ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UAScriptAfterPath=
|
||||
ProjectManager.UAScriptBeforePath=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USART2_UART_Init-USART2-false-HAL-true
|
||||
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_DAC1_Init-DAC1-false-HAL-true,6-MX_LPUART1_UART_Init-LPUART1-false-HAL-true,7-MX_USART1_UART_Init-USART1-false-HAL-true,8-MX_USART3_UART_Init-USART3-false-HAL-true,9-MX_QUADSPI_Init-QUADSPI-false-HAL-true,10-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,11-MX_SPI1_Init-SPI1-false-HAL-true,12-MX_SPI3_Init-SPI3-false-HAL-true,13-MX_RTC_Init-RTC-false-HAL-true
|
||||
QUADSPI.FlashSize=7
|
||||
QUADSPI.IPParameters=FlashSize
|
||||
RCC.ADCFreq_Value=32000000
|
||||
RCC.AHBFreq_Value=80000000
|
||||
RCC.APB1Freq_Value=80000000
|
||||
@@ -101,12 +190,11 @@ RCC.HSI_VALUE=16000000
|
||||
RCC.I2C1Freq_Value=80000000
|
||||
RCC.I2C2Freq_Value=80000000
|
||||
RCC.I2C3Freq_Value=80000000
|
||||
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value
|
||||
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value
|
||||
RCC.LPTIM1Freq_Value=80000000
|
||||
RCC.LPTIM2Freq_Value=80000000
|
||||
RCC.LPUART1Freq_Value=80000000
|
||||
RCC.LSCOPinFreq_Value=32000
|
||||
RCC.LSE_VALUE=32768
|
||||
RCC.LSI_VALUE=32000
|
||||
RCC.MCO1PinFreq_Value=80000000
|
||||
RCC.MSI_VALUE=4000000
|
||||
@@ -120,6 +208,8 @@ RCC.PLLSAI1RoutputFreq_Value=32000000
|
||||
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
||||
RCC.PWRFreq_Value=80000000
|
||||
RCC.RNGFreq_Value=32000000
|
||||
RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
|
||||
RCC.RTCFreq_Value=32768
|
||||
RCC.SAI1Freq_Value=9142857.142857144
|
||||
RCC.SDMMCFreq_Value=32000000
|
||||
RCC.SWPMI1Freq_Value=80000000
|
||||
@@ -131,8 +221,28 @@ RCC.USART3Freq_Value=80000000
|
||||
RCC.VCOInputFreq_Value=8000000
|
||||
RCC.VCOOutputFreq_Value=160000000
|
||||
RCC.VCOSAI1OutputFreq_Value=64000000
|
||||
SH.ADCx_IN3.0=ADC1_IN3,IN3-Single-Ended
|
||||
SH.ADCx_IN3.ConfNb=1
|
||||
SH.COMP_DAC11_group.0=DAC1_OUT1,DAC_OUT1
|
||||
SH.COMP_DAC11_group.ConfNb=1
|
||||
SPI1.CalculateBaudRate=40.0 MBits/s
|
||||
SPI1.Direction=SPI_DIRECTION_2LINES
|
||||
SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||
SPI1.Mode=SPI_MODE_MASTER
|
||||
SPI1.VirtualType=VM_MASTER
|
||||
SPI3.CalculateBaudRate=40.0 MBits/s
|
||||
SPI3.Direction=SPI_DIRECTION_2LINES
|
||||
SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||
SPI3.Mode=SPI_MODE_MASTER
|
||||
SPI3.VirtualType=VM_MASTER
|
||||
USART1.IPParameters=VirtualMode-Asynchronous
|
||||
USART1.VirtualMode-Asynchronous=VM_ASYNC
|
||||
USART2.IPParameters=VirtualMode-Asynchronous
|
||||
USART2.VirtualMode-Asynchronous=VM_ASYNC
|
||||
USART3.IPParameters=VirtualMode-Asynchronous
|
||||
USART3.VirtualMode-Asynchronous=VM_ASYNC
|
||||
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
|
||||
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
|
||||
VP_SYS_VS_Systick.Mode=SysTick
|
||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||
board=custom
|
||||
|
||||
@@ -23,15 +23,106 @@ menu "On-chip Peripheral Drivers"
|
||||
default y
|
||||
select RT_USING_SERIAL
|
||||
if BSP_USING_UART
|
||||
config BSP_USING_UART1
|
||||
bool "Enable UART1(External Debug)"
|
||||
default n
|
||||
|
||||
config BSP_USING_UART2
|
||||
bool "Enable UART2"
|
||||
bool "Enable UART2(CH340)"
|
||||
default y
|
||||
|
||||
config BSP_USING_UART3
|
||||
bool "Enable UART3(E53)"
|
||||
default n
|
||||
|
||||
config BSP_USING_LPUART1
|
||||
bool "Enable LPUART1(WAN AT UART)"
|
||||
default n
|
||||
config BSP_UART1_RX_USING_DMA
|
||||
bool "Enable UART2 RX DMA"
|
||||
bool "Enable UART1 RX DMA"
|
||||
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
|
||||
default n
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_ADC
|
||||
bool "Enable ADC"
|
||||
default n
|
||||
select RT_USING_ADC
|
||||
if BSP_USING_ADC
|
||||
config BSP_USING_ADC1
|
||||
bool "Enable ADC1(E53 LAN Interface)"
|
||||
default n
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_ONCHIP_RTC
|
||||
bool "Enable RTC"
|
||||
select RT_USING_RTC
|
||||
default n
|
||||
if BSP_USING_ONCHIP_RTC
|
||||
choice
|
||||
prompt "Select clock source"
|
||||
default BSP_RTC_USING_LSE
|
||||
|
||||
config BSP_RTC_USING_LSE
|
||||
bool "RTC USING LSE"
|
||||
|
||||
config BSP_RTC_USING_LSI
|
||||
bool "RTC USING LSI"
|
||||
endchoice
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_DAC
|
||||
bool "Enable DAC"
|
||||
default n
|
||||
select RT_USING_DAC
|
||||
if BSP_USING_DAC
|
||||
config BSP_USING_DAC1
|
||||
bool "Enable DAC1(E53 LAN Interface)"
|
||||
default n
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_SPI
|
||||
bool "Enable SPI BUS"
|
||||
default n
|
||||
select RT_USING_SPI
|
||||
if BSP_USING_SPI
|
||||
config BSP_USING_SPI1
|
||||
bool "Enable SPI1 BUS(E53 LAN Interface)"
|
||||
default n
|
||||
|
||||
config BSP_USING_SPI3
|
||||
bool "Enable SPI3 BUS(WAN Interface)"
|
||||
default n
|
||||
endif
|
||||
|
||||
config BSP_USING_QSPI_FLASH
|
||||
bool "Enable QSPI FLASH (NAND Flash 8MB)"
|
||||
select BSP_USING_QSPI
|
||||
select RT_USING_SFUD
|
||||
select RT_SFUD_USING_SFDP
|
||||
default n
|
||||
|
||||
config BSP_USING_SDCARD
|
||||
bool "Enable SDCARD (sdio)"
|
||||
select BSP_USING_SDIO
|
||||
default n
|
||||
|
||||
menuconfig BSP_USING_I2C1
|
||||
bool "Enable I2C1 BUS (software simulation)"
|
||||
default n
|
||||
select RT_USING_I2C
|
||||
select RT_USING_I2C_BITOPS
|
||||
select RT_USING_PIN
|
||||
if BSP_USING_I2C1
|
||||
config BSP_I2C1_SCL_PIN
|
||||
int "i2c1 scl pin number"
|
||||
range 1 216
|
||||
default 22
|
||||
config BSP_I2C1_SDA_PIN
|
||||
int "I2C1 sda pin number"
|
||||
range 1 216
|
||||
default 25
|
||||
endif
|
||||
|
||||
source "../libraries/HAL_Drivers/drivers/Kconfig"
|
||||
|
||||
|
||||
@@ -4,8 +4,8 @@
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2018-11-06 SummerGift first version
|
||||
* Date Author Notes
|
||||
* 2024-3-19 RuiXuan Zhang first version
|
||||
*/
|
||||
|
||||
#include "board.h"
|
||||
@@ -14,46 +14,72 @@
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
void SystemClock_Config(void) {
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure LSE Drive Capability
|
||||
*/
|
||||
HAL_PWR_EnableBkUpAccess();
|
||||
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_LSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 1;
|
||||
RCC_OscInitStruct.PLL.PLLN = 20;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
|
||||
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
|
||||
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Peripherals Common Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
void PeriphCommonClock_Config(void) {
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 1;
|
||||
RCC_OscInitStruct.PLL.PLLN = 20;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
|
||||
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
/** Initializes the peripherals clock
|
||||
*/
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_ADC;
|
||||
PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_PLLSAI1;
|
||||
PeriphClkInit.Sdmmc1ClockSelection = RCC_SDMMC1CLKSOURCE_PLLSAI1;
|
||||
PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSE;
|
||||
PeriphClkInit.PLLSAI1.PLLSAI1M = 1;
|
||||
PeriphClkInit.PLLSAI1.PLLSAI1N = 8;
|
||||
PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
|
||||
PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
|
||||
PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
|
||||
PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_48M2CLK | RCC_PLLSAI1_ADC1CLK;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
@@ -44,6 +44,8 @@ extern int __bss_end;
|
||||
|
||||
void SystemClock_Config(void);
|
||||
|
||||
void PeriphCommonClock_Config(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user