Re-normalizing the repo

This commit is contained in:
Ming, Bai
2013-01-08 22:40:58 +08:00
parent f3192c2293
commit b4de7cce57
3080 changed files with 1631515 additions and 1631515 deletions
+119 -119
View File
@@ -1,119 +1,119 @@
/*
* File : mtd_nand.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2012, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-12-05 Bernard the first version
* 2011-04-02 prife add mark_badblock and check_block
*/
/*
* COPYRIGHT (C) 2012, Shanghai Real Thread
*/
#ifndef __MTD_NAND_H__
#define __MTD_NAND_H__
#include <rtdevice.h>
struct rt_mtd_nand_driver_ops;
#define RT_MTD_NAND_DEVICE(device) ((struct rt_mtd_nand_device*)(device))
#define RT_MTD_EOK 0
#define RT_MTD_EECC 1
#define RT_MTD_EBUSY 2
#define RT_MTD_EIO 3
#define RT_MTD_ENOMEM 4
struct rt_mtd_nand_device
{
struct rt_device parent;
rt_uint16_t page_size; /* The Page size in the flash */
rt_uint16_t oob_size; /* Out of bank size */
rt_uint16_t oob_free; /* the free area in oob that flash driver not use */
rt_uint16_t plane_num; /* the number of plane in the NAND Flash */
rt_uint32_t pages_per_block; /* The number of page a block */
rt_uint16_t block_total;
rt_uint32_t block_start; /* The start of available block*/
rt_uint32_t block_end; /* The end of available block */
/* operations interface */
const struct rt_mtd_nand_driver_ops* ops;
};
struct rt_mtd_nand_driver_ops
{
rt_err_t (*read_id) (struct rt_mtd_nand_device* device);
rt_err_t (*read_page)(struct rt_mtd_nand_device* device,
rt_off_t page,
rt_uint8_t* data, rt_uint32_t data_len,
rt_uint8_t * spare, rt_uint32_t spare_len);
rt_err_t (*write_page)(struct rt_mtd_nand_device * device,
rt_off_t page,
const rt_uint8_t * data, rt_uint32_t data_len,
const rt_uint8_t * spare, rt_uint32_t spare_len);
rt_err_t (*move_page) (struct rt_mtd_nand_device *device, rt_off_t src_page, rt_off_t dst_page);
rt_err_t (*erase_block)(struct rt_mtd_nand_device* device, rt_uint32_t block);
rt_err_t (*check_block)(struct rt_mtd_nand_device* device, rt_uint32_t block);
rt_err_t (*mark_badblock)(struct rt_mtd_nand_device* device, rt_uint32_t block);
};
rt_err_t rt_mtd_nand_register_device(const char* name, struct rt_mtd_nand_device* device);
rt_inline rt_uint32_t rt_mtd_nand_read_id(struct rt_mtd_nand_device* device)
{
return device->ops->read_id(device);
}
rt_inline rt_err_t rt_mtd_nand_read(
struct rt_mtd_nand_device* device,
rt_off_t page,
rt_uint8_t* data, rt_uint32_t data_len,
rt_uint8_t * spare, rt_uint32_t spare_len)
{
return device->ops->read_page(device, page, data, data_len, spare, spare_len);
}
rt_inline rt_err_t rt_mtd_nand_write(
struct rt_mtd_nand_device* device,
rt_off_t page,
const rt_uint8_t* data, rt_uint32_t data_len,
const rt_uint8_t * spare, rt_uint32_t spare_len)
{
return device->ops->write_page(device, page, data, data_len, spare, spare_len);
}
rt_inline rt_err_t rt_mtd_nand_move_page(struct rt_mtd_nand_device* device,
rt_off_t src_page, rt_off_t dst_page)
{
return device->ops->move_page(device, src_page, dst_page);
}
rt_inline rt_err_t rt_mtd_nand_erase_block(struct rt_mtd_nand_device* device, rt_uint32_t block)
{
return device->ops->erase_block(device, block);
}
rt_inline rt_err_t rt_mtd_nand_check_block(struct rt_mtd_nand_device* device, rt_uint32_t block)
{
return device->ops->check_block(device, block);
}
rt_inline rt_err_t rt_mtd_nand_mark_badblock(struct rt_mtd_nand_device* device, rt_uint32_t block)
{
return device->ops->mark_badblock(device, block);
}
#endif /* MTD_NAND_H_ */
/*
* File : mtd_nand.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2012, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-12-05 Bernard the first version
* 2011-04-02 prife add mark_badblock and check_block
*/
/*
* COPYRIGHT (C) 2012, Shanghai Real Thread
*/
#ifndef __MTD_NAND_H__
#define __MTD_NAND_H__
#include <rtdevice.h>
struct rt_mtd_nand_driver_ops;
#define RT_MTD_NAND_DEVICE(device) ((struct rt_mtd_nand_device*)(device))
#define RT_MTD_EOK 0
#define RT_MTD_EECC 1
#define RT_MTD_EBUSY 2
#define RT_MTD_EIO 3
#define RT_MTD_ENOMEM 4
struct rt_mtd_nand_device
{
struct rt_device parent;
rt_uint16_t page_size; /* The Page size in the flash */
rt_uint16_t oob_size; /* Out of bank size */
rt_uint16_t oob_free; /* the free area in oob that flash driver not use */
rt_uint16_t plane_num; /* the number of plane in the NAND Flash */
rt_uint32_t pages_per_block; /* The number of page a block */
rt_uint16_t block_total;
rt_uint32_t block_start; /* The start of available block*/
rt_uint32_t block_end; /* The end of available block */
/* operations interface */
const struct rt_mtd_nand_driver_ops* ops;
};
struct rt_mtd_nand_driver_ops
{
rt_err_t (*read_id) (struct rt_mtd_nand_device* device);
rt_err_t (*read_page)(struct rt_mtd_nand_device* device,
rt_off_t page,
rt_uint8_t* data, rt_uint32_t data_len,
rt_uint8_t * spare, rt_uint32_t spare_len);
rt_err_t (*write_page)(struct rt_mtd_nand_device * device,
rt_off_t page,
const rt_uint8_t * data, rt_uint32_t data_len,
const rt_uint8_t * spare, rt_uint32_t spare_len);
rt_err_t (*move_page) (struct rt_mtd_nand_device *device, rt_off_t src_page, rt_off_t dst_page);
rt_err_t (*erase_block)(struct rt_mtd_nand_device* device, rt_uint32_t block);
rt_err_t (*check_block)(struct rt_mtd_nand_device* device, rt_uint32_t block);
rt_err_t (*mark_badblock)(struct rt_mtd_nand_device* device, rt_uint32_t block);
};
rt_err_t rt_mtd_nand_register_device(const char* name, struct rt_mtd_nand_device* device);
rt_inline rt_uint32_t rt_mtd_nand_read_id(struct rt_mtd_nand_device* device)
{
return device->ops->read_id(device);
}
rt_inline rt_err_t rt_mtd_nand_read(
struct rt_mtd_nand_device* device,
rt_off_t page,
rt_uint8_t* data, rt_uint32_t data_len,
rt_uint8_t * spare, rt_uint32_t spare_len)
{
return device->ops->read_page(device, page, data, data_len, spare, spare_len);
}
rt_inline rt_err_t rt_mtd_nand_write(
struct rt_mtd_nand_device* device,
rt_off_t page,
const rt_uint8_t* data, rt_uint32_t data_len,
const rt_uint8_t * spare, rt_uint32_t spare_len)
{
return device->ops->write_page(device, page, data, data_len, spare, spare_len);
}
rt_inline rt_err_t rt_mtd_nand_move_page(struct rt_mtd_nand_device* device,
rt_off_t src_page, rt_off_t dst_page)
{
return device->ops->move_page(device, src_page, dst_page);
}
rt_inline rt_err_t rt_mtd_nand_erase_block(struct rt_mtd_nand_device* device, rt_uint32_t block)
{
return device->ops->erase_block(device, block);
}
rt_inline rt_err_t rt_mtd_nand_check_block(struct rt_mtd_nand_device* device, rt_uint32_t block)
{
return device->ops->check_block(device, block);
}
rt_inline rt_err_t rt_mtd_nand_mark_badblock(struct rt_mtd_nand_device* device, rt_uint32_t block)
{
return device->ops->mark_badblock(device, block);
}
#endif /* MTD_NAND_H_ */
+71 -71
View File
@@ -1,71 +1,71 @@
/*
* File : mtd_nor.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2012, Shanghai Real-Thread Technology Co., Ltd
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2012-5-30 Bernard the first version
*/
#ifndef __MTD_NOR_H__
#define __MTD_NOR_H__
#include <rtdevice.h>
struct rt_mtd_nor_driver_ops;
#define RT_MTD_NOR_DEVICE(device) ((struct rt_mtd_nor_device*)(device))
struct rt_mtd_nor_device
{
struct rt_device parent;
rt_uint32_t block_size; /* The Block size in the flash */
rt_uint32_t block_start; /* The start of available block*/
rt_uint32_t block_end; /* The end of available block */
/* operations interface */
const struct rt_mtd_nor_driver_ops* ops;
};
struct rt_mtd_nor_driver_ops
{
rt_err_t (*read_id) (struct rt_mtd_nor_device* device);
rt_size_t (*read) (struct rt_mtd_nor_device* device, rt_off_t offset, rt_uint8_t* data, rt_uint32_t length);
rt_size_t (*write) (struct rt_mtd_nor_device* device, rt_off_t offset, const rt_uint8_t* data, rt_uint32_t length);
rt_err_t (*erase_block)(struct rt_mtd_nor_device* device, rt_off_t offset, rt_uint32_t length);
};
rt_err_t rt_mtd_nor_register_device(const char* name, struct rt_mtd_nor_device* device);
rt_inline rt_uint32_t rt_mtd_nor_read_id(struct rt_mtd_nor_device* device)
{
return device->ops->read_id(device);
}
rt_inline rt_size_t rt_mtd_nor_read(
struct rt_mtd_nor_device* device,
rt_off_t offset, rt_uint8_t* data, rt_uint32_t length)
{
return device->ops->read(device, offset, data, length);
}
rt_inline rt_size_t rt_mtd_nor_write(
struct rt_mtd_nor_device* device,
rt_off_t offset, const rt_uint8_t* data, rt_uint32_t length)
{
return device->ops->write(device, offset, data, length);
}
rt_inline rt_err_t rt_mtd_nor_erase_block(struct rt_mtd_nor_device* device, rt_off_t offset, rt_size_t length)
{
return device->ops->erase_block(device, offset, length);
}
#endif
/*
* File : mtd_nor.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2012, Shanghai Real-Thread Technology Co., Ltd
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2012-5-30 Bernard the first version
*/
#ifndef __MTD_NOR_H__
#define __MTD_NOR_H__
#include <rtdevice.h>
struct rt_mtd_nor_driver_ops;
#define RT_MTD_NOR_DEVICE(device) ((struct rt_mtd_nor_device*)(device))
struct rt_mtd_nor_device
{
struct rt_device parent;
rt_uint32_t block_size; /* The Block size in the flash */
rt_uint32_t block_start; /* The start of available block*/
rt_uint32_t block_end; /* The end of available block */
/* operations interface */
const struct rt_mtd_nor_driver_ops* ops;
};
struct rt_mtd_nor_driver_ops
{
rt_err_t (*read_id) (struct rt_mtd_nor_device* device);
rt_size_t (*read) (struct rt_mtd_nor_device* device, rt_off_t offset, rt_uint8_t* data, rt_uint32_t length);
rt_size_t (*write) (struct rt_mtd_nor_device* device, rt_off_t offset, const rt_uint8_t* data, rt_uint32_t length);
rt_err_t (*erase_block)(struct rt_mtd_nor_device* device, rt_off_t offset, rt_uint32_t length);
};
rt_err_t rt_mtd_nor_register_device(const char* name, struct rt_mtd_nor_device* device);
rt_inline rt_uint32_t rt_mtd_nor_read_id(struct rt_mtd_nor_device* device)
{
return device->ops->read_id(device);
}
rt_inline rt_size_t rt_mtd_nor_read(
struct rt_mtd_nor_device* device,
rt_off_t offset, rt_uint8_t* data, rt_uint32_t length)
{
return device->ops->read(device, offset, data, length);
}
rt_inline rt_size_t rt_mtd_nor_write(
struct rt_mtd_nor_device* device,
rt_off_t offset, const rt_uint8_t* data, rt_uint32_t length)
{
return device->ops->write(device, offset, data, length);
}
rt_inline rt_err_t rt_mtd_nor_erase_block(struct rt_mtd_nor_device* device, rt_off_t offset, rt_size_t length)
{
return device->ops->erase_block(device, offset, length);
}
#endif
+32 -32
View File
@@ -1,32 +1,32 @@
#ifndef __SD_H__
#define __SD_H__
/*
* File : sd.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-07-25 weety first version
*/
#include <rtthread.h>
#include <drivers/mmcsd_host.h>
#ifdef __cplusplus
extern "C" {
#endif
rt_err_t mmcsd_send_if_cond(struct rt_mmcsd_host *host, rt_uint32_t ocr);
rt_err_t mmcsd_send_app_op_cond(struct rt_mmcsd_host *host, rt_uint32_t ocr, rt_uint32_t *rocr);
rt_int32_t init_sd(struct rt_mmcsd_host *host, rt_uint32_t ocr);
#ifdef __cplusplus
}
#endif
#endif
#ifndef __SD_H__
#define __SD_H__
/*
* File : sd.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-07-25 weety first version
*/
#include <rtthread.h>
#include <drivers/mmcsd_host.h>
#ifdef __cplusplus
extern "C" {
#endif
rt_err_t mmcsd_send_if_cond(struct rt_mmcsd_host *host, rt_uint32_t ocr);
rt_err_t mmcsd_send_app_op_cond(struct rt_mmcsd_host *host, rt_uint32_t ocr, rt_uint32_t *rocr);
rt_int32_t init_sd(struct rt_mmcsd_host *host, rt_uint32_t ocr);
#ifdef __cplusplus
}
#endif
#endif
+199 -199
View File
@@ -1,199 +1,199 @@
/*
* File : sdio.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2012-01-15 weety first version
*/
#ifndef __SDIO_H__
#define __SDIO_H__
#include <rtthread.h>
#include <drivers/mmcsd_host.h>
#include <drivers/mmcsd_card.h>
#include <drivers/sdio_func_ids.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Card Common Control Registers (CCCR)
*/
#define SDIO_REG_CCCR_CCCR_REV 0x00
#define SDIO_CCCR_REV_1_00 0 /* CCCR/FBR Version 1.00 */
#define SDIO_CCCR_REV_1_10 1 /* CCCR/FBR Version 1.10 */
#define SDIO_CCCR_REV_1_20 2 /* CCCR/FBR Version 1.20 */
#define SDIO_SDIO_REV_1_00 0 /* SDIO Spec Version 1.00 */
#define SDIO_SDIO_REV_1_10 1 /* SDIO Spec Version 1.10 */
#define SDIO_SDIO_REV_1_20 2 /* SDIO Spec Version 1.20 */
#define SDIO_SDIO_REV_2_00 3 /* SDIO Spec Version 2.00 */
#define SDIO_REG_CCCR_SD_REV 0x01
#define SDIO_SD_REV_1_01 0 /* SD Physical Spec Version 1.01 */
#define SDIO_SD_REV_1_10 1 /* SD Physical Spec Version 1.10 */
#define SDIO_SD_REV_2_00 2 /* SD Physical Spec Version 2.00 */
#define SDIO_REG_CCCR_IO_EN 0x02
#define SDIO_REG_CCCR_IO_RDY 0x03
#define SDIO_REG_CCCR_INT_EN 0x04 /* Function/Master Interrupt Enable */
#define SDIO_REG_CCCR_INT_PEND 0x05 /* Function Interrupt Pending */
#define SDIO_REG_CCCR_IO_ABORT 0x06 /* function abort/card reset */
#define SDIO_REG_CCCR_BUS_IF 0x07 /* bus interface controls */
#define SDIO_BUS_WIDTH_1BIT 0x00
#define SDIO_BUS_WIDTH_4BIT 0x02
#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */
#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */
#define SDIO_BUS_ASYNC_INT 0x20
#define SDIO_BUS_CD_DISABLE 0x80 /* disable pull-up on DAT3 (pin 1) */
#define SDIO_REG_CCCR_CARD_CAPS 0x08
#define SDIO_CCCR_CAP_SDC 0x01 /* can do CMD52 while data transfer */
#define SDIO_CCCR_CAP_SMB 0x02 /* can do multi-block xfers (CMD53) */
#define SDIO_CCCR_CAP_SRW 0x04 /* supports read-wait protocol */
#define SDIO_CCCR_CAP_SBS 0x08 /* supports suspend/resume */
#define SDIO_CCCR_CAP_S4MI 0x10 /* interrupt during 4-bit CMD53 */
#define SDIO_CCCR_CAP_E4MI 0x20 /* enable ints during 4-bit CMD53 */
#define SDIO_CCCR_CAP_LSC 0x40 /* low speed card */
#define SDIO_CCCR_CAP_4BLS 0x80 /* 4 bit low speed card */
#define SDIO_REG_CCCR_CIS_PTR 0x09 /* common CIS pointer (3 bytes) */
/* Following 4 regs are valid only if SBS is set */
#define SDIO_REG_CCCR_BUS_SUSPEND 0x0c
#define SDIO_REG_CCCR_FUNC_SEL 0x0d
#define SDIO_REG_CCCR_EXEC_FLAG 0x0e
#define SDIO_REG_CCCR_READY_FLAG 0x0f
#define SDIO_REG_CCCR_FN0_BLKSIZE 0x10 /* 2bytes, 0x10~0x11 */
#define SDIO_REG_CCCR_POWER_CTRL 0x12
#define SDIO_POWER_SMPC 0x01 /* Supports Master Power Control */
#define SDIO_POWER_EMPC 0x02 /* Enable Master Power Control */
#define SDIO_REG_CCCR_SPEED 0x13
#define SDIO_SPEED_SHS 0x01 /* Supports High-Speed mode */
#define SDIO_SPEED_EHS 0x02 /* Enable High-Speed mode */
/*
* Function Basic Registers (FBR)
*/
#define SDIO_REG_FBR_BASE(f) ((f) * 0x100) /* base of function f's FBRs */
#define SDIO_REG_FBR_STD_FUNC_IF 0x00
#define SDIO_FBR_SUPPORTS_CSA 0x40 /* supports Code Storage Area */
#define SDIO_FBR_ENABLE_CSA 0x80 /* enable Code Storage Area */
#define SDIO_REG_FBR_STD_IF_EXT 0x01
#define SDIO_REG_FBR_POWER 0x02
#define SDIO_FBR_POWER_SPS 0x01 /* Supports Power Selection */
#define SDIO_FBR_POWER_EPS 0x02 /* Enable (low) Power Selection */
#define SDIO_REG_FBR_CIS 0x09 /* CIS pointer (3 bytes) */
#define SDIO_REG_FBR_CSA 0x0C /* CSA pointer (3 bytes) */
#define SDIO_REG_FBR_CSA_DATA 0x0F
#define SDIO_REG_FBR_BLKSIZE 0x10 /* block size (2 bytes) */
/* SDIO CIS Tuple code */
#define CISTPL_NULL 0x00
#define CISTPL_CHECKSUM 0x10
#define CISTPL_VERS_1 0x15
#define CISTPL_ALTSTR 0x16
#define CISTPL_MANFID 0x20
#define CISTPL_FUNCID 0x21
#define CISTPL_FUNCE 0x22
#define CISTPL_SDIO_STD 0x91
#define CISTPL_SDIO_EXT 0x92
#define CISTPL_END 0xff
/* SDIO device id */
#define SDIO_ANY_FUNC_ID 0xff
#define SDIO_ANY_MAN_ID 0xffff
#define SDIO_ANY_PROD_ID 0xffff
struct rt_sdio_device_id {
rt_uint8_t func_code;
rt_uint16_t manufacturer;
rt_uint16_t product;
};
struct rt_sdio_driver {
char *name;
rt_int32_t (*probe)(struct rt_mmcsd_card *card);
rt_int32_t (*remove)(struct rt_mmcsd_card *card);
struct rt_sdio_device_id *id;
};
rt_int32_t sdio_io_send_op_cond(struct rt_mmcsd_host *host, rt_uint32_t ocr, rt_uint32_t
*cmd5_resp);
rt_int32_t sdio_io_rw_direct(struct rt_mmcsd_card *card, rt_int32_t rw, rt_uint32_t fn,
rt_uint32_t reg_addr, rt_uint8_t *pdata, rt_uint8_t raw);
rt_int32_t sdio_io_rw_extended(struct rt_mmcsd_card *card, rt_int32_t rw, rt_uint32_t fn,
rt_uint32_t addr, rt_int32_t op_code, rt_uint8_t *buf, rt_uint32_t blocks, rt_uint32_t blksize);
rt_uint8_t sdio_io_readb(struct rt_sdio_function *func,
rt_uint32_t reg, rt_int32_t *err);
rt_int32_t sdio_io_writeb(struct rt_sdio_function *func,
rt_uint32_t reg, rt_uint8_t data);
rt_uint16_t sdio_io_readw(struct rt_sdio_function *func, rt_uint32_t addr, rt_int32_t *err);
rt_int32_t sdio_io_writew(struct rt_sdio_function *func, rt_uint16_t data, rt_uint32_t addr);
rt_uint32_t sdio_io_readl(struct rt_sdio_function *func, rt_uint32_t addr, rt_int32_t *err);
rt_int32_t sdio_io_writel(struct rt_sdio_function *func, rt_uint32_t data, rt_uint32_t addr);
rt_int32_t sdio_io_read_multi_fifo_b(struct rt_sdio_function *func,
rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t sdio_io_write_multi_fifo_b(struct rt_sdio_function *func,
rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t sdio_io_read_multi_incr_b(struct rt_sdio_function *func,
rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t sdio_io_write_multi_incr_b(struct rt_sdio_function *func,
rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t init_sdio(struct rt_mmcsd_host *host, rt_uint32_t ocr);
rt_int32_t sdio_attach_irq(struct rt_sdio_function *func, rt_sdio_irq_handler_t *handler);
rt_int32_t sdio_detach_irq(struct rt_sdio_function *func);
void sdio_irq_wakeup(struct rt_mmcsd_host *host);
rt_int32_t sdio_enable_func(struct rt_sdio_function *func);
rt_int32_t sdio_disable_func(struct rt_sdio_function *func);
rt_int32_t sdio_set_block_size(struct rt_sdio_function *func, rt_uint32_t blksize);
rt_int32_t sdio_register_driver(struct rt_sdio_driver *driver);
rt_int32_t sdio_unregister_driver(struct rt_sdio_driver *driver);
void rt_sdio_init(void);
#ifdef __cplusplus
}
#endif
#endif
/*
* File : sdio.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2012-01-15 weety first version
*/
#ifndef __SDIO_H__
#define __SDIO_H__
#include <rtthread.h>
#include <drivers/mmcsd_host.h>
#include <drivers/mmcsd_card.h>
#include <drivers/sdio_func_ids.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Card Common Control Registers (CCCR)
*/
#define SDIO_REG_CCCR_CCCR_REV 0x00
#define SDIO_CCCR_REV_1_00 0 /* CCCR/FBR Version 1.00 */
#define SDIO_CCCR_REV_1_10 1 /* CCCR/FBR Version 1.10 */
#define SDIO_CCCR_REV_1_20 2 /* CCCR/FBR Version 1.20 */
#define SDIO_SDIO_REV_1_00 0 /* SDIO Spec Version 1.00 */
#define SDIO_SDIO_REV_1_10 1 /* SDIO Spec Version 1.10 */
#define SDIO_SDIO_REV_1_20 2 /* SDIO Spec Version 1.20 */
#define SDIO_SDIO_REV_2_00 3 /* SDIO Spec Version 2.00 */
#define SDIO_REG_CCCR_SD_REV 0x01
#define SDIO_SD_REV_1_01 0 /* SD Physical Spec Version 1.01 */
#define SDIO_SD_REV_1_10 1 /* SD Physical Spec Version 1.10 */
#define SDIO_SD_REV_2_00 2 /* SD Physical Spec Version 2.00 */
#define SDIO_REG_CCCR_IO_EN 0x02
#define SDIO_REG_CCCR_IO_RDY 0x03
#define SDIO_REG_CCCR_INT_EN 0x04 /* Function/Master Interrupt Enable */
#define SDIO_REG_CCCR_INT_PEND 0x05 /* Function Interrupt Pending */
#define SDIO_REG_CCCR_IO_ABORT 0x06 /* function abort/card reset */
#define SDIO_REG_CCCR_BUS_IF 0x07 /* bus interface controls */
#define SDIO_BUS_WIDTH_1BIT 0x00
#define SDIO_BUS_WIDTH_4BIT 0x02
#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */
#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */
#define SDIO_BUS_ASYNC_INT 0x20
#define SDIO_BUS_CD_DISABLE 0x80 /* disable pull-up on DAT3 (pin 1) */
#define SDIO_REG_CCCR_CARD_CAPS 0x08
#define SDIO_CCCR_CAP_SDC 0x01 /* can do CMD52 while data transfer */
#define SDIO_CCCR_CAP_SMB 0x02 /* can do multi-block xfers (CMD53) */
#define SDIO_CCCR_CAP_SRW 0x04 /* supports read-wait protocol */
#define SDIO_CCCR_CAP_SBS 0x08 /* supports suspend/resume */
#define SDIO_CCCR_CAP_S4MI 0x10 /* interrupt during 4-bit CMD53 */
#define SDIO_CCCR_CAP_E4MI 0x20 /* enable ints during 4-bit CMD53 */
#define SDIO_CCCR_CAP_LSC 0x40 /* low speed card */
#define SDIO_CCCR_CAP_4BLS 0x80 /* 4 bit low speed card */
#define SDIO_REG_CCCR_CIS_PTR 0x09 /* common CIS pointer (3 bytes) */
/* Following 4 regs are valid only if SBS is set */
#define SDIO_REG_CCCR_BUS_SUSPEND 0x0c
#define SDIO_REG_CCCR_FUNC_SEL 0x0d
#define SDIO_REG_CCCR_EXEC_FLAG 0x0e
#define SDIO_REG_CCCR_READY_FLAG 0x0f
#define SDIO_REG_CCCR_FN0_BLKSIZE 0x10 /* 2bytes, 0x10~0x11 */
#define SDIO_REG_CCCR_POWER_CTRL 0x12
#define SDIO_POWER_SMPC 0x01 /* Supports Master Power Control */
#define SDIO_POWER_EMPC 0x02 /* Enable Master Power Control */
#define SDIO_REG_CCCR_SPEED 0x13
#define SDIO_SPEED_SHS 0x01 /* Supports High-Speed mode */
#define SDIO_SPEED_EHS 0x02 /* Enable High-Speed mode */
/*
* Function Basic Registers (FBR)
*/
#define SDIO_REG_FBR_BASE(f) ((f) * 0x100) /* base of function f's FBRs */
#define SDIO_REG_FBR_STD_FUNC_IF 0x00
#define SDIO_FBR_SUPPORTS_CSA 0x40 /* supports Code Storage Area */
#define SDIO_FBR_ENABLE_CSA 0x80 /* enable Code Storage Area */
#define SDIO_REG_FBR_STD_IF_EXT 0x01
#define SDIO_REG_FBR_POWER 0x02
#define SDIO_FBR_POWER_SPS 0x01 /* Supports Power Selection */
#define SDIO_FBR_POWER_EPS 0x02 /* Enable (low) Power Selection */
#define SDIO_REG_FBR_CIS 0x09 /* CIS pointer (3 bytes) */
#define SDIO_REG_FBR_CSA 0x0C /* CSA pointer (3 bytes) */
#define SDIO_REG_FBR_CSA_DATA 0x0F
#define SDIO_REG_FBR_BLKSIZE 0x10 /* block size (2 bytes) */
/* SDIO CIS Tuple code */
#define CISTPL_NULL 0x00
#define CISTPL_CHECKSUM 0x10
#define CISTPL_VERS_1 0x15
#define CISTPL_ALTSTR 0x16
#define CISTPL_MANFID 0x20
#define CISTPL_FUNCID 0x21
#define CISTPL_FUNCE 0x22
#define CISTPL_SDIO_STD 0x91
#define CISTPL_SDIO_EXT 0x92
#define CISTPL_END 0xff
/* SDIO device id */
#define SDIO_ANY_FUNC_ID 0xff
#define SDIO_ANY_MAN_ID 0xffff
#define SDIO_ANY_PROD_ID 0xffff
struct rt_sdio_device_id {
rt_uint8_t func_code;
rt_uint16_t manufacturer;
rt_uint16_t product;
};
struct rt_sdio_driver {
char *name;
rt_int32_t (*probe)(struct rt_mmcsd_card *card);
rt_int32_t (*remove)(struct rt_mmcsd_card *card);
struct rt_sdio_device_id *id;
};
rt_int32_t sdio_io_send_op_cond(struct rt_mmcsd_host *host, rt_uint32_t ocr, rt_uint32_t
*cmd5_resp);
rt_int32_t sdio_io_rw_direct(struct rt_mmcsd_card *card, rt_int32_t rw, rt_uint32_t fn,
rt_uint32_t reg_addr, rt_uint8_t *pdata, rt_uint8_t raw);
rt_int32_t sdio_io_rw_extended(struct rt_mmcsd_card *card, rt_int32_t rw, rt_uint32_t fn,
rt_uint32_t addr, rt_int32_t op_code, rt_uint8_t *buf, rt_uint32_t blocks, rt_uint32_t blksize);
rt_uint8_t sdio_io_readb(struct rt_sdio_function *func,
rt_uint32_t reg, rt_int32_t *err);
rt_int32_t sdio_io_writeb(struct rt_sdio_function *func,
rt_uint32_t reg, rt_uint8_t data);
rt_uint16_t sdio_io_readw(struct rt_sdio_function *func, rt_uint32_t addr, rt_int32_t *err);
rt_int32_t sdio_io_writew(struct rt_sdio_function *func, rt_uint16_t data, rt_uint32_t addr);
rt_uint32_t sdio_io_readl(struct rt_sdio_function *func, rt_uint32_t addr, rt_int32_t *err);
rt_int32_t sdio_io_writel(struct rt_sdio_function *func, rt_uint32_t data, rt_uint32_t addr);
rt_int32_t sdio_io_read_multi_fifo_b(struct rt_sdio_function *func,
rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t sdio_io_write_multi_fifo_b(struct rt_sdio_function *func,
rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t sdio_io_read_multi_incr_b(struct rt_sdio_function *func,
rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t sdio_io_write_multi_incr_b(struct rt_sdio_function *func,
rt_uint32_t addr, rt_uint8_t *buf, rt_uint32_t len);
rt_int32_t init_sdio(struct rt_mmcsd_host *host, rt_uint32_t ocr);
rt_int32_t sdio_attach_irq(struct rt_sdio_function *func, rt_sdio_irq_handler_t *handler);
rt_int32_t sdio_detach_irq(struct rt_sdio_function *func);
void sdio_irq_wakeup(struct rt_mmcsd_host *host);
rt_int32_t sdio_enable_func(struct rt_sdio_function *func);
rt_int32_t sdio_disable_func(struct rt_sdio_function *func);
rt_int32_t sdio_set_block_size(struct rt_sdio_function *func, rt_uint32_t blksize);
rt_int32_t sdio_register_driver(struct rt_sdio_driver *driver);
rt_int32_t sdio_unregister_driver(struct rt_sdio_driver *driver);
void rt_sdio_init(void);
#ifdef __cplusplus
}
#endif
#endif
@@ -1,44 +1,44 @@
/*
* File : sdio_func_ids.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2012-02-26 weety first version
*/
#ifndef __SDIO_FUNC_IDS_H__
#define __SDIO_FUNC_IDS_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Standard SDIO Function Interfaces */
#define SDIO_FUNC_CODE_NONE 0x00 /* Not a SDIO standard interface */
#define SDIO_FUNC_CODE_UART 0x01 /* SDIO Standard UART */
#define SDIO_FUNC_CODE_BT_A 0x02 /* SDIO Type-A for Bluetooth standard interface */
#define SDIO_FUNC_CODE_BT_B 0x03 /* SDIO Type-B for Bluetooth standard interface */
#define SDIO_FUNC_CODE_GPS 0x04 /* SDIO GPS standard interface */
#define SDIO_FUNC_CODE_CAMERA 0x05 /* SDIO Camera standard interface */
#define SDIO_FUNC_CODE_PHS 0x06 /* SDIO PHS standard interface */
#define SDIO_FUNC_CODE_WLAN 0x07 /* SDIO WLAN interface */
#define SDIO_FUNC_CODE_ATA 0x08 /* Embedded SDIO-ATA standard interface */
/* manufacturer id, product io */
#define SDIO_MANUFACTURER_ID_MARVELL 0x02df
#define SDIO_PRODUCT_ID_MARVELL_88W8686 0x9103
#ifdef __cplusplus
}
#endif
#endif
/*
* File : sdio_func_ids.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2012-02-26 weety first version
*/
#ifndef __SDIO_FUNC_IDS_H__
#define __SDIO_FUNC_IDS_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Standard SDIO Function Interfaces */
#define SDIO_FUNC_CODE_NONE 0x00 /* Not a SDIO standard interface */
#define SDIO_FUNC_CODE_UART 0x01 /* SDIO Standard UART */
#define SDIO_FUNC_CODE_BT_A 0x02 /* SDIO Type-A for Bluetooth standard interface */
#define SDIO_FUNC_CODE_BT_B 0x03 /* SDIO Type-B for Bluetooth standard interface */
#define SDIO_FUNC_CODE_GPS 0x04 /* SDIO GPS standard interface */
#define SDIO_FUNC_CODE_CAMERA 0x05 /* SDIO Camera standard interface */
#define SDIO_FUNC_CODE_PHS 0x06 /* SDIO PHS standard interface */
#define SDIO_FUNC_CODE_WLAN 0x07 /* SDIO WLAN interface */
#define SDIO_FUNC_CODE_ATA 0x08 /* Embedded SDIO-ATA standard interface */
/* manufacturer id, product io */
#define SDIO_MANUFACTURER_ID_MARVELL 0x02df
#define SDIO_PRODUCT_ID_MARVELL_88W8686 0x9103
#ifdef __cplusplus
}
#endif
#endif
+12 -12
View File
@@ -57,21 +57,21 @@
#define RT_SERIAL_ERR_OVERRUN 0x01
#define RT_SERIAL_ERR_FRAMING 0x02
#define RT_SERIAL_ERR_PARITY 0x03
#define RT_SERIAL_ERR_PARITY 0x03
#define RT_SERIAL_TX_DATAQUEUE_SIZE 40
#define RT_SERIAL_TX_DATAQUEUE_LWM 30
/* Default config for serial_configure structure */
#define RT_SERIAL_CONFIG_DEFAULT \
{ \
BAUD_RATE_115200, /* 115200 bits/s */ \
DATA_BITS_8, /* 8 databits */ \
STOP_BITS_1, /* 1 stopbit */ \
PARITY_NONE, /* No parity */ \
BIT_ORDER_LSB, /* LSB first sent */ \
NRZ_NORMAL, /* Normal mode */ \
0 \
/* Default config for serial_configure structure */
#define RT_SERIAL_CONFIG_DEFAULT \
{ \
BAUD_RATE_115200, /* 115200 bits/s */ \
DATA_BITS_8, /* 8 databits */ \
STOP_BITS_1, /* 1 stopbit */ \
PARITY_NONE, /* No parity */ \
BIT_ORDER_LSB, /* LSB first sent */ \
NRZ_NORMAL, /* Normal mode */ \
0 \
}
struct serial_ringbuffer
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
+3 -3
View File
@@ -138,9 +138,9 @@ rt_err_t rt_data_queue_peak(struct rt_data_queue *queue,
void rt_data_queue_reset(struct rt_data_queue *queue);
#ifdef RT_USING_RTC
#include "drivers/rtc.h"
#ifdef RT_USING_ALARM
#include "drivers/alarm.h"
#include "drivers/rtc.h"
#ifdef RT_USING_ALARM
#include "drivers/alarm.h"
#endif
#endif /* RT_USING_RTC */