mirror of
https://github.com/paparazzi/paparazzi.git
synced 2026-05-27 17:06:31 +08:00
[boards] start support for openpilot revo nano (#1968)
- While the STM32F411 can run at up to 100MHz, this is not supported out-of-the-box with libopencm3 yet. So we use the 84MHz clock setup from the STM32F401. - ADC pins not set up yet
This commit is contained in:
Felix Ruess
GitHub
@@ -6,8 +6,8 @@
|
||||
radio="radios/dummy.xml"
|
||||
telemetry="telemetry/default_rotorcraft.xml"
|
||||
flight_plan="flight_plans/rotorcraft_basic.xml"
|
||||
settings="settings/rotorcraft_basic.xml settings/nps.xml settings/persistent_settings.xml settings/control/rotorcraft_guidance.xml settings/control/stabilization_att_int.xml settings/superbitrf.xml"
|
||||
settings_modules="modules/gps.xml modules/gps_ubx_ucenter.xml modules/geo_mag.xml"
|
||||
settings="settings/rotorcraft_basic.xml settings/nps.xml settings/persistent_settings.xml settings/control/rotorcraft_guidance.xml settings/control/stabilization_att_int.xml settings/superbitrf.xml"
|
||||
settings_modules="modules/geo_mag.xml modules/gps_ubx_ucenter.xml modules/ahrs_int_cmpl_quat.xml modules/gps.xml modules/imu_common.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
@@ -17,8 +17,8 @@
|
||||
radio="radios/dummy.xml"
|
||||
telemetry="telemetry/default_rotorcraft.xml"
|
||||
flight_plan="flight_plans/rotorcraft_basic.xml"
|
||||
settings="settings/rotorcraft_basic.xml settings/control/rotorcraft_guidance.xml settings/control/stabilization_att_int_quat.xml"
|
||||
settings_modules="modules/gps.xml modules/geo_mag.xml modules/air_data.xml"
|
||||
settings="settings/rotorcraft_basic.xml settings/control/rotorcraft_guidance.xml settings/control/stabilization_att_int_quat.xml"
|
||||
settings_modules="modules/video_rtp_stream.xml modules/air_data.xml modules/geo_mag.xml modules/ins_extended.xml modules/ahrs_float_mlkf.xml modules/gps.xml modules/imu_common.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
@@ -28,8 +28,8 @@
|
||||
radio="radios/cockpitSX.xml"
|
||||
telemetry="telemetry/demo.xml"
|
||||
flight_plan="flight_plans/dummy.xml"
|
||||
settings=" settings/test_actuators_pwm.xml"
|
||||
settings_modules="modules/imu_common.xml"
|
||||
settings="settings/test_actuators_pwm.xml"
|
||||
settings_modules="modules/ahrs_int_cmpl_quat.xml modules/imu_common.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
@@ -40,7 +40,7 @@
|
||||
telemetry="telemetry/default_fixedwing_imu.xml"
|
||||
flight_plan="flight_plans/basic.xml"
|
||||
settings="settings/fixedwing_basic.xml settings/control/ctl_new.xml"
|
||||
settings_modules="modules/gps.xml modules/switch_servo.xml"
|
||||
settings_modules="modules/switch_servo.xml modules/gps.xml modules/imu_common.xml modules/ahrs_int_cmpl_quat.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
@@ -50,8 +50,8 @@
|
||||
radio="radios/dummy.xml"
|
||||
telemetry="telemetry/default_rotorcraft.xml"
|
||||
flight_plan="flight_plans/rotorcraft_basic.xml"
|
||||
settings="settings/rotorcraft_basic.xml settings/setup_actuators.xml settings/estimation/ahrs_secondary.xml settings/control/rotorcraft_guidance.xml"
|
||||
settings_modules="modules/gps.xml modules/gps_ubx_ucenter.xml modules/geo_mag.xml modules/air_data.xml"
|
||||
settings="settings/rotorcraft_basic.xml settings/setup_actuators.xml settings/estimation/ahrs_secondary.xml settings/control/rotorcraft_guidance.xml"
|
||||
settings_modules="modules/air_data.xml modules/geo_mag.xml modules/gps_ubx_ucenter.xml modules/ahrs_int_cmpl_quat.xml modules/ahrs_float_mlkf.xml modules/gps.xml modules/imu_common.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
@@ -61,8 +61,8 @@
|
||||
radio="radios/TGY9x_jeti.xml"
|
||||
telemetry="telemetry/default_rotorcraft.xml"
|
||||
flight_plan="flight_plans/rotorcraft_basic.xml"
|
||||
settings="settings/rotorcraft_basic.xml settings/control/stabilization_att_int.xml settings/control/rotorcraft_guidance.xml "
|
||||
settings_modules="modules/gps.xml modules/gps_ubx_ucenter.xml"
|
||||
settings="settings/rotorcraft_basic.xml settings/control/stabilization_att_int.xml settings/control/rotorcraft_guidance.xml"
|
||||
settings_modules="modules/gps_ubx_ucenter.xml modules/ins_extended.xml modules/ahrs_int_cmpl_quat.xml modules/imu_common.xml modules/gps.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
@@ -98,6 +98,17 @@
|
||||
settings_modules="modules/gps_ubx_ucenter.xml modules/ahrs_int_cmpl_quat.xml modules/imu_common.xml modules/gps.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
name="quad_revo_nano"
|
||||
ac_id="4"
|
||||
airframe="airframes/untested/quad_revo_nano.xml"
|
||||
radio="radios/TGY9x_jeti.xml"
|
||||
telemetry="telemetry/default_rotorcraft.xml"
|
||||
flight_plan="flight_plans/rotorcraft_basic.xml"
|
||||
settings="settings/rotorcraft_basic.xml settings/control/stabilization_att_int.xml settings/control/rotorcraft_guidance.xml"
|
||||
settings_modules="modules/air_data.xml modules/gps_ubx_ucenter.xml modules/ahrs_int_cmpl_quat.xml modules/imu_common.xml modules/gps.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
name="test_bbb"
|
||||
ac_id="1"
|
||||
|
||||
@@ -0,0 +1,195 @@
|
||||
<!DOCTYPE airframe SYSTEM "../airframe.dtd">
|
||||
|
||||
<!-- this is a quadrotor frame with the OpenPilot Revo Nano board:
|
||||
* Autopilot: OpenPilot Revo Nano https://librepilot.atlassian.net/wiki/display/LPDOC/OpenPilot+Revolution+Nano
|
||||
* Actuators: PWM motor controllers http://wiki.paparazziuav.org/wiki/Subsystem/actuators#PWM
|
||||
-->
|
||||
|
||||
<airframe name="QuadRevoNano">
|
||||
|
||||
<firmware name="rotorcraft">
|
||||
<target name="ap" board="openpilot_revo_nano">
|
||||
</target>
|
||||
|
||||
<target name="nps" board="pc">
|
||||
<module name="fdm" type="jsbsim"/>
|
||||
</target>
|
||||
|
||||
<module name="radio_control" type="ppm"/>
|
||||
<module name="motor_mixing"/>
|
||||
<module name="actuators" type="pwm">
|
||||
<define name="SERVO_HZ" value="400"/>
|
||||
</module>
|
||||
<module name="telemetry" type="transparent"/>
|
||||
<module name="stabilization" type="int_quat"/>
|
||||
<module name="gps" type="ublox"/>
|
||||
<module name="imu" type="openpilot_revo_nano"/>
|
||||
<module name="ahrs" type="int_cmpl_quat">
|
||||
<define name="AHRS_GRAVITY_HEURISTIC_FACTOR" value="30"/>
|
||||
<configure name="AHRS_ALIGNER_LED" value="2"/>
|
||||
</module>
|
||||
<module name="ins"/>
|
||||
|
||||
<module name="gps" type="ubx_ucenter"/>
|
||||
<module name="air_data"/>
|
||||
</firmware>
|
||||
|
||||
<firmware name="setup">
|
||||
<target name="tunnel" board="openpilot_revo_nano"/>
|
||||
</firmware>
|
||||
|
||||
<firmware name="test_progs">
|
||||
<target name="test_sys_time_timer" board="openpilot_revo_nano">
|
||||
<define name="LED_BLUE" value="1"/>
|
||||
<define name="LED_RED" value="2"/>
|
||||
</target>
|
||||
<target name="test_sys_time_usleep" board="openpilot_revo_nano">
|
||||
<define name="LED_BLUE" value="1"/>
|
||||
<define name="LED_RED" value="2"/>
|
||||
</target>
|
||||
<target name="test_telemetry" board="openpilot_revo_nano"/>
|
||||
<target name="test_imu" board="openpilot_revo_nano">
|
||||
<module name="imu" type="openpilot_revo_nano"/>
|
||||
</target>
|
||||
<target name="test_ahrs" board="openpilot_revo_nano">
|
||||
<module name="imu" type="openpilot_revo_nano"/>
|
||||
<module name="ahrs" type="int_cmpl_quat"/>
|
||||
</target>
|
||||
<target name="test_actuators_pwm" board="openpilot_revo_nano"/>
|
||||
</firmware>
|
||||
|
||||
<servos driver="Pwm">
|
||||
<servo name="FL" no="0" min="1000" neutral="1100" max="2000"/>
|
||||
<servo name="FR" no="1" min="1000" neutral="1100" max="2000"/>
|
||||
<servo name="BR" no="2" min="1000" neutral="1100" max="2000"/>
|
||||
<servo name="BL" no="3" min="1000" neutral="1100" max="2000"/>
|
||||
</servos>
|
||||
|
||||
<section name="MIXING" prefix="MOTOR_MIXING_">
|
||||
<!-- front left (CW), front right (CCW), back right (CW), back left (CCW) -->
|
||||
<define name="TYPE" value="QUAD_X"/>
|
||||
</section>
|
||||
|
||||
<commands>
|
||||
<axis name="PITCH" failsafe_value="0"/>
|
||||
<axis name="ROLL" failsafe_value="0"/>
|
||||
<axis name="YAW" failsafe_value="0"/>
|
||||
<axis name="THRUST" failsafe_value="0"/>
|
||||
</commands>
|
||||
|
||||
<command_laws>
|
||||
<call fun="motor_mixing_run(autopilot_motors_on,FALSE,values)"/>
|
||||
<set servo="FL" value="motor_mixing.commands[MOTOR_FRONT_LEFT]"/>
|
||||
<set servo="FR" value="motor_mixing.commands[MOTOR_FRONT_RIGHT]"/>
|
||||
<set servo="BR" value="motor_mixing.commands[MOTOR_BACK_RIGHT]"/>
|
||||
<set servo="BL" value="motor_mixing.commands[MOTOR_BACK_LEFT]"/>
|
||||
</command_laws>
|
||||
|
||||
<section name="IMU" prefix="IMU_">
|
||||
<define name="MAG_X_NEUTRAL" value="344"/>
|
||||
<define name="MAG_Y_NEUTRAL" value="-114"/>
|
||||
<define name="MAG_Z_NEUTRAL" value="-221"/>
|
||||
<define name="MAG_X_SENS" value="7.13840383063" integer="16"/>
|
||||
<define name="MAG_Y_SENS" value="7.07298310496" integer="16"/>
|
||||
<define name="MAG_Z_SENS" value="6.23392912181" integer="16"/>
|
||||
|
||||
<define name="BODY_TO_IMU_PHI" value="180." unit="deg"/>
|
||||
<define name="BODY_TO_IMU_THETA" value="0." unit="deg"/>
|
||||
<define name="BODY_TO_IMU_PSI" value="90." unit="deg"/>
|
||||
</section>
|
||||
|
||||
<section name="AHRS" prefix="AHRS_">
|
||||
<define name="H_X" value="0.3770441"/>
|
||||
<define name="H_Y" value="0.0193986"/>
|
||||
<define name="H_Z" value="0.9259921"/>
|
||||
</section>
|
||||
|
||||
<section name="INS" prefix="INS_">
|
||||
</section>
|
||||
|
||||
|
||||
|
||||
<section name="STABILIZATION_ATTITUDE" prefix="STABILIZATION_ATTITUDE_">
|
||||
<!-- setpoints -->
|
||||
<define name="SP_MAX_PHI" value="60." unit="deg"/>
|
||||
<define name="SP_MAX_THETA" value="60." unit="deg"/>
|
||||
<define name="SP_MAX_R" value="90." unit="deg/s"/>
|
||||
<define name="DEADBAND_A" value="0"/>
|
||||
<define name="DEADBAND_E" value="0"/>
|
||||
<define name="DEADBAND_R" value="250"/>
|
||||
|
||||
<!-- reference -->
|
||||
<define name="REF_OMEGA_P" value="400" unit="deg/s"/>
|
||||
<define name="REF_ZETA_P" value="0.85"/>
|
||||
<define name="REF_MAX_P" value="400." unit="deg/s"/>
|
||||
<define name="REF_MAX_PDOT" value="RadOfDeg(8000.)"/>
|
||||
|
||||
<define name="REF_OMEGA_Q" value="400" unit="deg/s"/>
|
||||
<define name="REF_ZETA_Q" value="0.85"/>
|
||||
<define name="REF_MAX_Q" value="400." unit="deg/s"/>
|
||||
<define name="REF_MAX_QDOT" value="RadOfDeg(8000.)"/>
|
||||
|
||||
<define name="REF_OMEGA_R" value="250" unit="deg/s"/>
|
||||
<define name="REF_ZETA_R" value="0.85"/>
|
||||
<define name="REF_MAX_R" value="180." unit="deg/s"/>
|
||||
<define name="REF_MAX_RDOT" value="RadOfDeg(1800.)"/>
|
||||
|
||||
<!-- feedback -->
|
||||
<define name="PHI_PGAIN" value="1000"/>
|
||||
<define name="PHI_DGAIN" value="400"/>
|
||||
<define name="PHI_IGAIN" value="200"/>
|
||||
|
||||
<define name="THETA_PGAIN" value="1000"/>
|
||||
<define name="THETA_DGAIN" value="400"/>
|
||||
<define name="THETA_IGAIN" value="200"/>
|
||||
|
||||
<define name="PSI_PGAIN" value="500"/>
|
||||
<define name="PSI_DGAIN" value="300"/>
|
||||
<define name="PSI_IGAIN" value="10"/>
|
||||
|
||||
<!-- feedforward -->
|
||||
<define name="PHI_DDGAIN" value="300"/>
|
||||
<define name="THETA_DDGAIN" value="300"/>
|
||||
<define name="PSI_DDGAIN" value="300"/>
|
||||
</section>
|
||||
|
||||
<section name="GUIDANCE_V" prefix="GUIDANCE_V_">
|
||||
<define name="HOVER_KP" value="150"/>
|
||||
<define name="HOVER_KD" value="80"/>
|
||||
<define name="HOVER_KI" value="20"/>
|
||||
<define name="NOMINAL_HOVER_THROTTLE" value="0.5"/>
|
||||
<define name="ADAPT_THROTTLE_ENABLED" value="TRUE"/>
|
||||
</section>
|
||||
|
||||
<section name="GUIDANCE_H" prefix="GUIDANCE_H_">
|
||||
<define name="APPROX_FORCE_BY_THRUST" value="TRUE"/>
|
||||
<define name="MAX_BANK" value="30" unit="deg"/>
|
||||
<define name="USE_SPEED_REF" value="TRUE"/>
|
||||
<define name="PGAIN" value="50"/>
|
||||
<define name="DGAIN" value="100"/>
|
||||
<define name="AGAIN" value="70"/>
|
||||
<define name="IGAIN" value="20"/>
|
||||
</section>
|
||||
|
||||
<section name="SIMULATOR" prefix="NPS_">
|
||||
<define name="ACTUATOR_NAMES" value="nw_motor, ne_motor, se_motor, sw_motor" type="string[]"/>
|
||||
<define name="JSBSIM_MODEL" value="simple_x_quad_ccw" type="string"/>
|
||||
<define name="SENSORS_PARAMS" value="nps_sensors_params_default.h" type="string"/>
|
||||
<!-- mode switch on joystick channel 5 (axis numbering starting at zero) -->
|
||||
<define name="JS_AXIS_MODE" value="4"/>
|
||||
</section>
|
||||
|
||||
<section name="AUTOPILOT">
|
||||
<define name="MODE_MANUAL" value="AP_MODE_ATTITUDE_DIRECT"/>
|
||||
<define name="MODE_AUTO1" value="AP_MODE_ATTITUDE_Z_HOLD"/>
|
||||
<define name="MODE_AUTO2" value="AP_MODE_NAV"/>
|
||||
</section>
|
||||
|
||||
<section name="BAT">
|
||||
<define name="CATASTROPHIC_BAT_LEVEL" value="9.3" unit="V"/>
|
||||
<define name="CRITIC_BAT_LEVEL" value="9.6" unit="V"/>
|
||||
<define name="LOW_BAT_LEVEL" value="9.7" unit="V"/>
|
||||
<define name="MAX_BAT_LEVEL" value="12.4" unit="V"/>
|
||||
</section>
|
||||
|
||||
</airframe>
|
||||
Reference in New Issue
Block a user