diff --git a/sw/airborne/baro_scp.c b/sw/airborne/baro_scp.c
new file mode 100755
index 0000000000..c17d57bcf9
--- /dev/null
+++ b/sw/airborne/baro_scp.c
@@ -0,0 +1,173 @@
+#include "std.h"
+#include "init_hw.h"
+#include "sys_time.h"
+#include "led.h"
+#include "interrupt_hw.h"
+
+#include "uart.h"
+#include "messages.h"
+#include "downlink.h"
+
+#include "spi_hw.h"
+
+#include "baro_scp.h"
+
+#define STA_UNINIT       0
+#define STA_INITIALISING 1
+#define STA_IDLE         2
+
+uint8_t  baro_scp_status;
+uint32_t baro_scp_pressure;
+uint16_t baro_scp_temperature;
+bool_t baro_scp_available;
+
+static void baro_scp_start_high_res_measurement(void);
+static void baro_scp_read(void);
+static void EXTINT_ISR(void) __attribute__((naked));
+static void SPI1_ISR(void) __attribute__((naked));
+
+void baro_scp_periodic(void) {
+  if (baro_scp_status == STA_UNINIT && cpu_time_sec > 1) {
+    baro_scp_start_high_res_measurement();
+    baro_scp_status = STA_INITIALISING;
+  }
+}
+
+/* SSPCR0 settings */
+#define SSP_DDS  0x07 << 0  /* data size         : 8 bits        */
+#define SSP_FRF  0x00 << 4  /* frame format      : SPI           */
+#define SSP_CPOL 0x00 << 6  /* clock polarity    : data captured on first clock transition */  
+#define SSP_CPHA 0x00 << 7  /* clock phase       : SCK idles low */
+#define SSP_SCR  0x0F << 8  /* serial clock rate : divide by 16  */
+
+/* SSPCR1 settings */
+#define SSP_LBM  0x00 << 0  /* loopback mode     : disabled                  */
+#define SSP_SSE  0x00 << 1  /* SSP enable        : disabled                  */
+#define SSP_MS   0x00 << 2  /* master slave mode : master                    */
+#define SSP_SOD  0x00 << 3  /* slave output disable : don't care when master */
+
+#define SS_PIN   20
+#define SS_IODIR IO0DIR
+#define SS_IOSET IO0SET
+#define SS_IOCLR IO0CLR
+
+#define ScpSelect()   SetBit(SS_IOCLR,SS_PIN)
+#define ScpUnselect() SetBit(SS_IOSET,SS_PIN)
+
+#define DRDY_PINSEL PINSEL0
+#define DRDY_PINSEL_BIT  14
+#define DRDY_PINSEL_VAL   3
+#define DRDY_EINT         2
+#define DRDY_VIC_IT       VIC_EINT2
+
+
+void baro_scp_init( void ) {
+  /* setup pins for SSP (SCK, MISO, MOSI) */
+  PINSEL1 |= 2 << 2 | 2 << 4 | 2 << 6;
+  
+  /* setup SSP */
+  SSPCR0 = SSP_DDS | SSP_FRF | SSP_CPOL | SSP_CPHA | SSP_SCR;
+  SSPCR1 = SSP_LBM | SSP_MS | SSP_SOD;
+  SSPCPSR = 0x20;
+
+  /* initialize interrupt vector */
+  VICIntSelect &= ~VIC_BIT(VIC_SPI1);   // SPI1 selected as IRQ
+  VICIntEnable = VIC_BIT(VIC_SPI1);     // SPI1 interrupt enabled
+  VICVectCntl7 = VIC_ENABLE | VIC_SPI1;
+  VICVectAddr7 = (uint32_t)SPI1_ISR;    // address of the ISR 
+  
+  /* configure SS pin */
+  SetBit(SS_IODIR, SS_PIN); /* pin is output  */
+  ScpUnselect();            /* pin idles high */
+
+  /* configure DRDY pin */
+  /* connected pin to EXINT */ 
+  DRDY_PINSEL |= DRDY_PINSEL_VAL << DRDY_PINSEL_BIT;
+  SetBit(EXTMODE, DRDY_EINT); /* EINT is edge trigered */
+  SetBit(EXTPOLAR,DRDY_EINT); /* EINT is trigered on rising edge */
+  SetBit(EXTINT,DRDY_EINT);   /* clear pending EINT */
+  
+  /* initialize interrupt vector */
+  VICIntSelect &= ~VIC_BIT( DRDY_VIC_IT );  /* select EINT as IRQ source */
+  VICIntEnable = VIC_BIT( DRDY_VIC_IT );    /* enable it */
+  VICVectCntl11 = VIC_ENABLE | DRDY_VIC_IT;
+  VICVectAddr11 = (uint32_t)EXTINT_ISR;         // address of the ISR 
+  
+  baro_scp_status = STA_UNINIT;
+}
+
+void SPI1_ISR(void) {
+  ISR_ENTRY();
+
+  if (baro_scp_status == STA_INITIALISING) {
+    uint8_t foo1 = SSPDR;
+    uint8_t foo2 = SSPDR;
+    baro_scp_status = STA_IDLE;
+    foo1=foo2;
+  }
+  else if (baro_scp_status == STA_IDLE) {
+  
+    uint8_t foo0 = SSPDR;
+    baro_scp_temperature = SSPDR<<8;
+    baro_scp_temperature += SSPDR;
+    if (baro_scp_temperature & 0x2000) {
+      baro_scp_temperature |= 0xC000;
+    }
+    baro_scp_temperature *= 5;
+
+    uint8_t foo1 = SSPDR;
+    uint32_t datard8 = SSPDR<<16;
+    uint8_t foo2 = SSPDR;
+    baro_scp_pressure = SSPDR<<8;
+    baro_scp_pressure += SSPDR;
+    baro_scp_pressure += datard8;
+    baro_scp_pressure *= 25;
+    baro_scp_available = TRUE;
+    foo1=foo2;
+    foo0=foo2;
+  }
+
+  ScpUnselect();
+  SpiClearRti();
+  SpiDisable();
+
+  VICVectAddr = 0x00000000; /* clear this interrupt from the VIC */
+  ISR_EXIT();
+}
+
+void EXTINT_ISR(void) {
+  ISR_ENTRY();
+  baro_scp_read();
+
+  SetBit(EXTINT,DRDY_EINT); /* clear EINT2 */
+  VICVectAddr = 0x00000000; /* clear this interrupt from the VIC */
+  ISR_EXIT();
+}
+
+/* write 0x0A to 0x03 */
+static void baro_scp_start_high_res_measurement(void) {
+  uint8_t cmd  = 0x03<<2|0x02;
+  uint8_t data = 0x0A;
+  ScpSelect();
+  SSPDR = cmd;
+  SSPDR = data;
+  SpiEnableRti();
+  SpiEnable();
+}
+
+/* read 0x21 (TEMP), 0x1F (MSB) and 0x20 (LSB) */
+static void baro_scp_read(void) {
+  uint8_t cmd0 = 0x21 << 2;
+  uint8_t cmd1 = 0x1F << 2;
+  uint8_t cmd2 = 0x20 << 2;
+  ScpSelect(); 
+  SSPDR = cmd0;
+  SSPDR = 0;
+  SSPDR = 0;
+  SSPDR = cmd1;
+  SSPDR = 0;
+  SSPDR = cmd2;
+  SSPDR = 0;
+  SSPDR = 0;
+  SpiEnable();
+}
diff --git a/sw/airborne/baro_scp.h b/sw/airborne/baro_scp.h
new file mode 100755
index 0000000000..713ad38ca7
--- /dev/null
+++ b/sw/airborne/baro_scp.h
@@ -0,0 +1,18 @@
+#ifndef BARO_SCP_H
+#define BARO_SCP_H
+
+#include "std.h"
+
+#define STA_UNINIT       0
+#define STA_INITIALISING 1
+#define STA_IDLE         2
+
+extern uint8_t  baro_scp_status;
+extern uint32_t baro_scp_pressure;
+extern uint16_t baro_scp_temperature;
+extern bool_t baro_scp_available;
+
+void baro_scp_init(void);
+void baro_scp_periodic(void);
+
+#endif