mirror of
https://github.com/paparazzi/paparazzi.git
synced 2026-05-29 02:38:07 +08:00
[conf] drop discovery boards
if test board from ST should be used, better use the more recent nucleo144
This commit is contained in:
Gautier Hattenberger
@@ -32,17 +32,6 @@
|
||||
settings_modules="modules/ahrs_int_cmpl_quat.xml modules/imu_common.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
name="discovery"
|
||||
ac_id="9"
|
||||
airframe="airframes/FLIXR/flixr_discovery.xml"
|
||||
radio="radios/mc20.xml"
|
||||
telemetry="telemetry/default_fixedwing_imu.xml"
|
||||
flight_plan="flight_plans/basic.xml"
|
||||
settings="settings/fixedwing_basic.xml"
|
||||
settings_modules="modules/switch_servo.xml modules/gps.xml modules/imu_common.xml modules/ahrs_int_cmpl_quat.xml modules/nav_basic_fw.xml modules/guidance_full_pid_fw.xml modules/stabilization_adaptive_fw.xml"
|
||||
gui_color="blue"
|
||||
/>
|
||||
<aircraft
|
||||
name="flixr_lisamx"
|
||||
ac_id="42"
|
||||
|
||||
@@ -1,369 +0,0 @@
|
||||
<!DOCTYPE airframe SYSTEM "../airframe.dtd">
|
||||
<!-- ST Model Discovery (http://www.sheng-teng.com/)
|
||||
TWOG1 (http://wiki.paparazziuav.org/wiki/TWOG/v1.0)
|
||||
* uBlox LEA5H and Sarantel helix GPS antenna
|
||||
|
||||
-->
|
||||
|
||||
<airframe name="Discovery">
|
||||
|
||||
<firmware name="fixedwing">
|
||||
<target name="ap" board="twog_1.0">
|
||||
<configure name="PERIODIC_FREQUENCY" value="960"/> <!-- IMU FREQ -->
|
||||
<configure name="AHRS_PROPAGATE_FREQUENCY" value="120"/>
|
||||
<configure name="AHRS_CORRECT_FREQUENCY" value="60"/>
|
||||
<configure name="AHRS_ALIGNER_LED" value="2"/>
|
||||
<configure name="SYS_TIME_LED" value="1"/>
|
||||
<configure name="GPS_LED" value="none"/>
|
||||
<!-- for airspeed sensor
|
||||
<define name="USE_I2C0"/>
|
||||
-->
|
||||
</target>
|
||||
<target name="sim" board="pc"/>
|
||||
|
||||
<define name="LOITER_TRIM"/>
|
||||
<define name="USE_PITCH_TRIM"/> <!-- basically same as loiter trim, but for adaptive-->
|
||||
<define name="USE_GYRO_PITCH_RATE"/>
|
||||
|
||||
<define name="WIND_INFO"/>
|
||||
|
||||
<!-- Communication -->
|
||||
<module name="telemetry" type="transparent"/>
|
||||
<module name="radio_control" type="ppm"/>
|
||||
<!--module name="settings" type="rc"/-->
|
||||
|
||||
<!-- Control -->
|
||||
<module name="control" type="new"/>
|
||||
<module name="navigation"/>
|
||||
|
||||
<module name="ahrs" type="int_cmpl_quat">
|
||||
<configure name="USE_MAGNETOMETER" value="0"/>
|
||||
<define name="AHRS_USE_GPS_HEADING" value="1"/>
|
||||
</module>
|
||||
<module name="ins" type="alt_float"/>
|
||||
|
||||
<!-- Sensors -->
|
||||
<module name="imu" type="b2_v1.0">
|
||||
<configure name="NO_MAG" value="1"/>
|
||||
</module>
|
||||
<module name="gps" type="ublox"/>
|
||||
<module name="current_sensor">
|
||||
<configure name="ADC_CURRENT_SENSOR" value="ADC_3"/>
|
||||
</module>
|
||||
<module name="switch" type="servo"/>
|
||||
<module name="sys_mon"/>
|
||||
<module name="adc_generic">
|
||||
<configure name="ADC_CHANNEL_GENERIC1" value="ADC_4"/> <!-- voltage sensor -->
|
||||
</module>
|
||||
</firmware>
|
||||
|
||||
|
||||
<firmware name="setup">
|
||||
<target name="tunnel" board="twog_1.0" />
|
||||
<target name="usb_tunnel" board="twog_1.0">
|
||||
<configure name="TUNNEL_PORT" value="UART1"/>
|
||||
</target>
|
||||
</firmware>
|
||||
|
||||
<firmware name="test_progs">
|
||||
<configure name="SYS_TIME_LED" value="1"/>
|
||||
<target name="test_gpio" board="twog_1.0"/>
|
||||
<target name="test_sys_time_timer" board="twog_1.0"/>
|
||||
<target name="test_telemetry" board="twog_1.0"/>
|
||||
</firmware>
|
||||
|
||||
|
||||
<!-- Define here to which CONNECTOR NUMBER the servo is connected to, on the autopilot cicuit board -->
|
||||
<servos>
|
||||
<servo name="MOTOR" no="0" min="1100" neutral="1100" max="1900"/>
|
||||
<servo name="ELEVATOR" no="2" min="1100" neutral="1500" max="1900"/>
|
||||
<servo name="AILERON_RIGHT" no="3" min="1000" neutral="1500" max="1000"/>
|
||||
<servo name="AILERON_LEFT" no="4" min="1000" neutral="1500" max="2000"/>
|
||||
<servo name="RUDDER" no="6" min="1000" neutral="1500" max="2000"/>
|
||||
<servo name="HATCH" no="7" min="1100" neutral="1100" max="1900"/>
|
||||
</servos>
|
||||
|
||||
<section name="SWITCH_SERVO" PREFIX="SWITCH_SERVO_">
|
||||
<define name="SERVO" value="HATCH"/>
|
||||
<define name="ON_VALUE" value="SERVO_HATCH_MIN"/>
|
||||
<define name="OFF_VALUE" value="SERVO_HATCH_MAX"/>
|
||||
</section>
|
||||
|
||||
<!-- commands section -->
|
||||
<commands>
|
||||
<axis name="THROTTLE" failsafe_value="0"/>
|
||||
<axis name="ROLL" failsafe_value="0"/>
|
||||
<axis name="PITCH" failsafe_value="0"/>
|
||||
<axis name="YAW" failsafe_value="2000"/>
|
||||
<axis name="HATCH" failsafe_value="-9599"/>
|
||||
<!-- maybe set to open position so we can insert the payload -->
|
||||
</commands>
|
||||
|
||||
<rc_commands>
|
||||
<set command="THROTTLE" value="@THROTTLE"/>
|
||||
<set command="ROLL" value="@ROLL"/>
|
||||
<set command="PITCH" value="@PITCH"/>
|
||||
<set command="YAW" value="@YAW"/>
|
||||
</rc_commands>
|
||||
|
||||
<auto_rc_commands>
|
||||
<!-- To still be able to use rudder, which is needed with sidewind landing in auto1 stabilization mode only YAW -->
|
||||
<set command="YAW" value="@YAW"/>
|
||||
</auto_rc_commands>
|
||||
|
||||
<!--For mixed controlflaps -->
|
||||
<section name="MIXER">
|
||||
<define name="AILERON_DIFF" value="0.7"/>
|
||||
<define name="COMBI_SWITCH" value="0.3"/>
|
||||
</section>
|
||||
|
||||
<command_laws>
|
||||
<set servo="MOTOR" value="@THROTTLE"/>
|
||||
<set servo="ELEVATOR" value="@PITCH"/>
|
||||
<set servo="RUDDER" value="@YAW + @ROLL*COMBI_SWITCH"/>
|
||||
|
||||
<let var="roll" value="@ROLL"/>
|
||||
<set servo="AILERON_LEFT" value="($roll > 0 ? 1: AILERON_DIFF) * $roll"/>
|
||||
<set servo="AILERON_RIGHT" value="($roll > 0 ? AILERON_DIFF : 1) * $roll"/>
|
||||
<!--set servo="HATCH" value="@HATCH"/-->
|
||||
</command_laws>
|
||||
|
||||
|
||||
<section name="IMU" prefix="IMU_">
|
||||
<define name="GYRO_P_CHAN" value="1"/>
|
||||
<define name="GYRO_Q_CHAN" value="2"/>
|
||||
<define name="GYRO_R_CHAN" value="0"/>
|
||||
|
||||
<define name="GYRO_P_SIGN" value="1"/>
|
||||
<define name="GYRO_Q_SIGN" value="1"/>
|
||||
<define name="GYRO_R_SIGN" value="-1"/>
|
||||
|
||||
<define name="GYRO_P_NEUTRAL" value="32362"/>
|
||||
<define name="GYRO_R_NEUTRAL" value="32080"/>
|
||||
<define name="GYRO_Q_NEUTRAL" value="32096"/>
|
||||
|
||||
<define name="GYRO_P_SENS" value="1.1032765" integer="16"/>
|
||||
<define name="GYRO_R_SENS" value="1.1360802599" integer="16"/>
|
||||
<define name="GYRO_Q_SENS" value="1.1249874614" integer="16"/>
|
||||
|
||||
<define name="ACCEL_X_CHAN" value="3"/>
|
||||
<define name="ACCEL_Y_CHAN" value="6"/>
|
||||
<define name="ACCEL_Z_CHAN" value="5"/>
|
||||
|
||||
<define name="ACCEL_X_SIGN" value="-1"/>
|
||||
<define name="ACCEL_Y_SIGN" value="1"/>
|
||||
<define name="ACCEL_Z_SIGN" value="-1"/>
|
||||
|
||||
<define name="ACCEL_X_SENS" value="2.45932966" integer="16"/>
|
||||
<define name="ACCEL_Z_SENS" value="2.45106376" integer="16"/>
|
||||
<define name="ACCEL_Y_SENS" value="2.47825717" integer="16"/>
|
||||
|
||||
<define name="ACCEL_X_NEUTRAL" value="31886"/>
|
||||
<define name="ACCEL_Z_NEUTRAL" value="32162"/>
|
||||
<define name="ACCEL_Y_NEUTRAL" value="32941"/>
|
||||
|
||||
<define name="GYRO_P_Q" value="0."/>
|
||||
<define name="GYRO_P_R" value="0."/>
|
||||
<define name="GYRO_Q_P" value="0."/>
|
||||
<define name="GYRO_Q_R" value="0."/>
|
||||
<define name="GYRO_R_P" value="0."/>
|
||||
<define name="GYRO_R_Q" value="0."/>
|
||||
|
||||
<define name="BODY_TO_IMU_PHI" value="0" unit="deg"/>
|
||||
<define name="BODY_TO_IMU_THETA" value="0" unit="deg"/>
|
||||
<define name="BODY_TO_IMU_PSI" value="0" unit="deg"/>
|
||||
</section>
|
||||
|
||||
<!-- Munich -->
|
||||
<section name="AHRS" prefix="AHRS_">
|
||||
<define name="H_X" value="0.4357869"/>
|
||||
<define name="H_Y" value="0.0177010"/>
|
||||
<define name="H_Z" value="0.8998758"/>
|
||||
</section>
|
||||
|
||||
<section name="INS" prefix="INS_">
|
||||
<define name="ROLL_NEUTRAL_DEFAULT" value="0." unit="deg"/>
|
||||
<define name="PITCH_NEUTRAL_DEFAULT" value="0." unit="deg"/>
|
||||
</section>
|
||||
|
||||
|
||||
<section name="AUTO1" prefix="AUTO1_">
|
||||
<define name="MAX_ROLL" value="55" unit="deg"/>
|
||||
<define name="MAX_PITCH" value="35" unit="deg"/>
|
||||
</section>
|
||||
|
||||
|
||||
<section name="BAT">
|
||||
<define name="MilliAmpereOfAdc(adc)" value="(adc*88)"/>
|
||||
|
||||
<!-- <define name="ADC_CHANNEL_VOLTAGE" value="ADC_4" /> -->
|
||||
<!-- The real multiplier is unknown we take 2 as test example -->
|
||||
<!-- <define name="VoltageOfAdc(adc)" value ="(adc*2)"/> -->
|
||||
|
||||
<!-- If NO current-volts sensor installed uncomment below -->
|
||||
<!--define name="MILLIAMP_AT_FULL_THROTTLE" value="17000" unit="mA"/-->
|
||||
|
||||
<define name="CATASTROPHIC_BAT_LEVEL" value="9.3" unit="V"/> <!-- 3S lipo 3.1*3=9.3 -->
|
||||
<define name="CRITIC_BAT_LEVEL" value="9.6" unit="V"/>
|
||||
<define name="LOW_BAT_LEVEL" value="9.7" unit="V"/>
|
||||
<define name="MAX_BAT_LEVEL" value="12.4" unit="V"/> <!-- 3S lipo 4.2*3=12.6 -->
|
||||
</section>
|
||||
|
||||
<section name="MISC">
|
||||
<define name="MINIMUM_AIRSPEED" value="9.0" unit="m/s"/>
|
||||
<define name="NOMINAL_AIRSPEED" value="14.0" unit="m/s"/>
|
||||
<define name="MAXIMUM_AIRSPEED" value="22.0" unit="m/s"/>
|
||||
<define name="CARROT" value="5.0" unit="s"/>
|
||||
<define name="KILL_MODE_DISTANCE" value="(1.5*MAX_DIST_FROM_HOME)"/>
|
||||
<define name="CONTROL_FREQUENCY" value="60" unit="Hz"/>
|
||||
|
||||
<!--UNLOCKED_HOME_MODE if set to TRUE means that HOME mode does not get stuck.
|
||||
If not set before when you would enter home mode you had to flip a bit via the GCS to get out. -->
|
||||
<!--define name="UNLOCKED_HOME_MODE" value="TRUE"/-->
|
||||
<!-- RC_LOST_MODE means that if your RC Transmitter signal is not received anymore in the autopilot, e.g. you switch it off
|
||||
or fly a long range mission you define the wanted mode behaviour here.
|
||||
If you do not define it, it defaults to flying to the flightplan HOME -->
|
||||
<!--define name="RC_LOST_MODE" value="PPRZ_MODE_AUTO2"/-->
|
||||
|
||||
|
||||
<define name="DEFAULT_CIRCLE_RADIUS" value="50.0"/>
|
||||
|
||||
<!-- The Glide definitions are used for calculating the touch down point during auto landing -->
|
||||
<!--
|
||||
-->
|
||||
</section>
|
||||
|
||||
<!-- ******************* VERTICAL CONTROL ********************************** -->
|
||||
|
||||
<section name="VERTICAL CONTROL" prefix="V_CTL_">
|
||||
<define name="POWER_CTL_BAT_NOMINAL" value="11.2" unit="volt"/>
|
||||
|
||||
<!-- outer loop proportional gain -->
|
||||
<define name="ALTITUDE_PGAIN" value="0.04" unit="(m/s)/m"/>
|
||||
|
||||
<!-- outer loop saturation -->
|
||||
<define name="ALTITUDE_MAX_CLIMB" value="2." unit="m/s"/>
|
||||
|
||||
<!-- Cruise throttle + limits -->
|
||||
<define name="AUTO_THROTTLE_NOMINAL_CRUISE_THROTTLE" value="0.65" unit="%"/>
|
||||
<define name="AUTO_THROTTLE_MIN_CRUISE_THROTTLE" value="0.40" unit="%"/>
|
||||
<define name="AUTO_THROTTLE_MAX_CRUISE_THROTTLE" value="0.90" unit="%"/>
|
||||
<define name="THROTTLE_SLEW_LIMITER" value="0.5" unit="s"/>
|
||||
<define name="AUTO_PITCH_MAX_PITCH" value="RadOfDeg(25)"/>
|
||||
<define name="AUTO_PITCH_MIN_PITCH" value="RadOfDeg(-20)"/>
|
||||
|
||||
<!-- Climb loop (throttle) -->
|
||||
<define name="AUTO_THROTTLE_CLIMB_THROTTLE_INCREMENT" value="0.05" unit="%/(m/s)"/>
|
||||
<define name="AUTO_THROTTLE_PGAIN" value="0.007" unit="%/(m/s)"/>
|
||||
<define name="AUTO_THROTTLE_IGAIN" value="0.001"/>
|
||||
<define name="AUTO_THROTTLE_DGAIN" value="0.0"/>
|
||||
|
||||
<!-- Climb loop (pitch) -->
|
||||
<define name="AUTO_THROTTLE_PITCH_OF_VZ_PGAIN" value="0.20" unit="rad/(m/s)"/>
|
||||
<!--define name="AUTO_PITCH_PGAIN" value="0.0"/>
|
||||
<define name="AUTO_PITCH_DGAIN" value="0.0"/>
|
||||
<define name="AUTO_PITCH_IGAIN" value="0.0"/-->
|
||||
<define name="AUTO_PITCH_PGAIN" value="0.052"/>
|
||||
<define name="AUTO_PITCH_DGAIN" value="0.0"/>
|
||||
<define name="AUTO_PITCH_IGAIN" value="0.065"/>
|
||||
|
||||
|
||||
<!-- airspeed control -->
|
||||
<!--define name="AUTO_AIRSPEED_SETPOINT" value="12."/>
|
||||
<define name="AUTO_AIRSPEED_THROTTLE_PGAIN" value="0.1"/>
|
||||
<define name="AUTO_AIRSPEED_THROTTLE_DGAIN" value="0.12"/>
|
||||
<define name="AUTO_AIRSPEED_THROTTLE_IGAIN" value="0.0"/>
|
||||
<define name="AUTO_AIRSPEED_PITCH_PGAIN" value="0.06"/>
|
||||
<define name="AUTO_AIRSPEED_PITCH_DGAIN" value="0.0"/>
|
||||
<define name="AUTO_AIRSPEED_PITCH_IGAIN" value="0.042"/>
|
||||
<define name="AIRSPEED_MAX" value="25"/>
|
||||
<define name="AIRSPEED_MIN" value="8"/-->
|
||||
|
||||
<!-- groundspeed control -->
|
||||
<!--define name="AUTO_GROUNDSPEED_SETPOINT" value="15"/>
|
||||
<define name="AUTO_GROUNDSPEED_PGAIN" value="1."/>
|
||||
<define name="AUTO_GROUNDSPEED_IGAIN" value="0."/-->
|
||||
|
||||
<!-- Loiter and Dash trimming -->
|
||||
<define name="AUTO_THROTTLE_LOITER_TRIM" value="0" unit="pprz_t"/>
|
||||
<define name="AUTO_THROTTLE_DASH_TRIM" value="0" unit="pprz_t"/>
|
||||
<define name="PITCH_LOITER_TRIM" value="0" unit="pprz_t"/>
|
||||
<define name="PITCH_DASH_TRIM" value="0" unit="pprz_t"/>
|
||||
|
||||
</section>
|
||||
|
||||
<!-- ******************* HORIZONTAL CONTROL ******************************** -->
|
||||
<section name="HORIZONTAL CONTROL" prefix="H_CTL_">
|
||||
|
||||
<define name="COURSE_PGAIN" value="1.1"/>
|
||||
<!-- <define name="COURSE_IGAIN" value="0.01"/> -->
|
||||
<!-- <define name="COURSE_DGAIN" value="0.02"/> -->
|
||||
<!-- <define name="COURSE_PRE_BANK_CORRECTION" value="0.5"/> -->
|
||||
|
||||
<!-- maybe handy to avoid over corner with lots of wind and small airframe -->
|
||||
<!-- <define name="COURSE_SLEW_INCREMENT" value="RadOfDeg(4)"/> -->
|
||||
|
||||
<define name="ROLL_MAX_SETPOINT" value="50" unit="deg"/>
|
||||
<define name="PITCH_MAX_SETPOINT" value="35" unit="deg"/>
|
||||
<define name="PITCH_MIN_SETPOINT" value="-30" unit="deg"/>
|
||||
|
||||
|
||||
<define name="ROLL_ATTITUDE_GAIN" value="7500."/>
|
||||
<define name="ROLL_RATE_GAIN" value="1500"/>
|
||||
|
||||
<!-- only for stabilization adaptive -->
|
||||
<define name="ROLL_IGAIN" value="500"/>
|
||||
<define name="ROLL_KFFA" value="0."/>
|
||||
<define name="ROLL_KFFD" value="0."/>
|
||||
|
||||
<!-- ** Maximal roll angle change per 1/60 of second ** -->
|
||||
<!--define name="ROLL_SLEW" value="0.6"/--> <!-- was 0.05 -->
|
||||
|
||||
|
||||
<define name="PITCH_PGAIN" value="7000."/>
|
||||
|
||||
<!-- only for stabilization adaptive -->
|
||||
<define name="PITCH_DGAIN" value="1000."/>
|
||||
<define name="PITCH_IGAIN" value="500."/>
|
||||
<define name="PITCH_KFFA" value="0."/>
|
||||
<define name="PITCH_KFFD" value="0."/>
|
||||
|
||||
|
||||
<define name="AILERON_OF_THROTTLE" value="0.0"/>
|
||||
<define name="PITCH_OF_ROLL" value="0.03"/>
|
||||
|
||||
</section>
|
||||
|
||||
<!-- ******************************** NAV ********************************** -->
|
||||
<section name="NAV">
|
||||
<define name="NAV_GLIDE_PITCH_TRIM" value="0"/>
|
||||
</section>
|
||||
|
||||
<!-- ***************************** AGGRESIVE ******************************* -->
|
||||
<section name="AGGRESSIVE" prefix="AGR_">
|
||||
<define name="BLEND_START" value="18"/> <!-- Altitude Error to Initiate Aggressive Climb CANNOT BE ZERO!!-->
|
||||
<define name="BLEND_END" value="8"/> <!-- Altitude Error to Blend Aggressive to Regular Climb Modes CANNOT BE ZERO!!-->
|
||||
<define name="CLIMB_THROTTLE" value="0.99"/> <!-- Gaz for Aggressive Climb -->
|
||||
<define name="CLIMB_PITCH" value="RadOfDeg(45)"/> <!-- Pitch for Aggressive Climb -->
|
||||
<define name="DESCENT_THROTTLE" value="0.5"/> <!-- Gaz for Aggressive Decent -->
|
||||
<define name="DESCENT_PITCH" value="RadOfDeg(-30)"/> <!-- Pitch for Aggressive Decent -->
|
||||
<define name="CLIMB_NAV_RATIO" value="0.8"/> <!-- Percent Navigation for Altitude Error Equal to Start Altitude -->
|
||||
<define name="DESCENT_NAV_RATIO" value="0.99"/>
|
||||
</section>
|
||||
|
||||
<!-- ****************************** FAILSAFE ******************************* -->
|
||||
<section name="FAILSAFE" prefix="FAILSAFE_">
|
||||
<define name="DELAY_WITHOUT_GPS" value="3" unit="s"/>
|
||||
<define name="DEFAULT_THROTTLE" value="0" unit="%"/>
|
||||
<define name="DEFAULT_ROLL" value="0.15" unit="rad"/>
|
||||
<define name="DEFAULT_PITCH" value="-0.1" unit="rad"/>
|
||||
<define name="HOME_RADIUS" value="60" unit="m"/>
|
||||
</section>
|
||||
|
||||
|
||||
<!-- ******************************** SIMU ********************************* -->
|
||||
<section name="SIMU">
|
||||
<define name="YAW_RESPONSE_FACTOR" value="0.5"/> <!-- a to low of a value gives bad simulation results -->
|
||||
</section>
|
||||
|
||||
</airframe>
|
||||
@@ -1,177 +0,0 @@
|
||||
<!DOCTYPE airframe SYSTEM "../airframe.dtd">
|
||||
|
||||
|
||||
<airframe name="STM32F4 Discovery Board test">
|
||||
|
||||
<firmware name="rotorcraft">
|
||||
<target name="ap" board="stm32f4_discovery">
|
||||
<module name="radio_control" type="spektrum">
|
||||
<define name="RADIO_MODE" value="RADIO_AUX1"/>
|
||||
</module>
|
||||
</target>
|
||||
|
||||
<module name="motor_mixing"/>
|
||||
<module name="actuators" type="pwm">
|
||||
<!--define name="SERVO_HZ" value="400"/-->
|
||||
</module>
|
||||
|
||||
<module name="telemetry" type="transparent"/>
|
||||
<module name="imu" type="aspirin_v2.1">
|
||||
<configure name="ASPIRIN_2_SPI_DEV" value="spi1"/>
|
||||
<configure name="ASPIRIN_2_SPI_SLAVE_IDX" value="SPI_SLAVE0"/>
|
||||
</module>
|
||||
<module name="gps" type="ublox"/>
|
||||
<module name="stabilization" type="int_quat"/>
|
||||
<module name="ahrs" type="int_cmpl_quat">
|
||||
<define name="AHRS_GRAVITY_HEURISTIC_FACTOR" value="30"/>
|
||||
</module>
|
||||
<module name="ins"/>
|
||||
</firmware>
|
||||
|
||||
<firmware name="test_progs">
|
||||
<target name="test_adc" board="stm32f4_discovery"/>
|
||||
<target name="test_lis302dl" board="stm32f4_discovery">
|
||||
<define name="STM32F4_DISCOVERY_SPI1_FOR_LIS302"/>
|
||||
</target>
|
||||
</firmware>
|
||||
|
||||
<modules main_freq="512">
|
||||
</modules>
|
||||
|
||||
<servos driver="Pwm">
|
||||
<servo name="FRONT" no="0" min="1000" neutral="1100" max="1900"/>
|
||||
<servo name="BACK" no="1" min="1000" neutral="1100" max="1900"/>
|
||||
<servo name="RIGHT" no="2" min="1000" neutral="1100" max="1900"/>
|
||||
<servo name="LEFT" no="3" min="1000" neutral="1100" max="1900"/>
|
||||
</servos>
|
||||
|
||||
<commands>
|
||||
<axis name="ROLL" failsafe_value="0"/>
|
||||
<axis name="PITCH" failsafe_value="0"/>
|
||||
<axis name="YAW" failsafe_value="0"/>
|
||||
<axis name="THRUST" failsafe_value="0"/>
|
||||
</commands>
|
||||
|
||||
<section name="MIXING" prefix="MOTOR_MIXING_">
|
||||
<define name="TRIM_ROLL" value="0"/>
|
||||
<define name="TRIM_PITCH" value="0"/>
|
||||
<define name="TRIM_YAW" value="0"/>
|
||||
<define name="NB_MOTOR" value="4"/>
|
||||
<define name="SCALE" value="256"/>
|
||||
<!-- front/back turning CW, right/left CCW -->
|
||||
<define name="ROLL_COEF" value="{ 0, 0, -256, 256 }"/>
|
||||
<define name="PITCH_COEF" value="{ 256, -256, 0, 0 }"/>
|
||||
<define name="YAW_COEF" value="{ -256, -256, 256, 256 }"/>
|
||||
<define name="THRUST_COEF" value="{ 256, 256, 256, 256 }"/>
|
||||
</section>
|
||||
|
||||
<command_laws>
|
||||
<call fun="motor_mixing_run(autopilot_get_motors_on(),FALSE,values)"/>
|
||||
<set servo="FRONT" value="motor_mixing.commands[0]"/>
|
||||
<set servo="BACK" value="motor_mixing.commands[1]"/>
|
||||
<set servo="RIGHT" value="motor_mixing.commands[2]"/>
|
||||
<set servo="LEFT" value="motor_mixing.commands[3]"/>
|
||||
</command_laws>
|
||||
|
||||
<section name="IMU" prefix="IMU_">
|
||||
<define name="ACCEL_X_NEUTRAL" value="11"/>
|
||||
<define name="ACCEL_Y_NEUTRAL" value="11"/>
|
||||
<define name="ACCEL_Z_NEUTRAL" value="-25"/>
|
||||
|
||||
<!-- replace this with your own calibration -->
|
||||
<define name="MAG_X_NEUTRAL" value="-179"/>
|
||||
<define name="MAG_Y_NEUTRAL" value="-21"/>
|
||||
<define name="MAG_Z_NEUTRAL" value="79"/>
|
||||
<define name="MAG_X_SENS" value="4.17334785618" integer="16"/>
|
||||
<define name="MAG_Y_SENS" value="3.98885954135" integer="16"/>
|
||||
<define name="MAG_Z_SENS" value="4.40442339014" integer="16"/>
|
||||
|
||||
<define name="BODY_TO_IMU_PHI" value="0." unit="deg"/>
|
||||
<define name="BODY_TO_IMU_THETA" value="0." unit="deg"/>
|
||||
<define name="BODY_TO_IMU_PSI" value="0." unit="deg"/>
|
||||
</section>
|
||||
|
||||
<section name="AHRS" prefix="AHRS_">
|
||||
<define name="H_X" value="0.3770441"/>
|
||||
<define name="H_Y" value="0.0193986"/>
|
||||
<define name="H_Z" value="0.9259921"/>
|
||||
</section>
|
||||
|
||||
<section name="INS" prefix="INS_">
|
||||
</section>
|
||||
|
||||
|
||||
|
||||
<section name="STABILIZATION_ATTITUDE" prefix="STABILIZATION_ATTITUDE_">
|
||||
<!-- setpoints -->
|
||||
<define name="SP_MAX_PHI" value="45." unit="deg"/>
|
||||
<define name="SP_MAX_THETA" value="45." unit="deg"/>
|
||||
<define name="SP_MAX_R" value="90." unit="deg/s"/>
|
||||
<define name="DEADBAND_A" value="0"/>
|
||||
<define name="DEADBAND_E" value="0"/>
|
||||
<define name="DEADBAND_R" value="250"/>
|
||||
|
||||
<!-- reference -->
|
||||
<define name="REF_OMEGA_P" value="400" unit="deg/s"/>
|
||||
<define name="REF_ZETA_P" value="0.85"/>
|
||||
<define name="REF_MAX_P" value="400." unit="deg/s"/>
|
||||
<define name="REF_MAX_PDOT" value="RadOfDeg(8000.)"/>
|
||||
|
||||
<define name="REF_OMEGA_Q" value="400" unit="deg/s"/>
|
||||
<define name="REF_ZETA_Q" value="0.85"/>
|
||||
<define name="REF_MAX_Q" value="400." unit="deg/s"/>
|
||||
<define name="REF_MAX_QDOT" value="RadOfDeg(8000.)"/>
|
||||
|
||||
<define name="REF_OMEGA_R" value="250" unit="deg/s"/>
|
||||
<define name="REF_ZETA_R" value="0.85"/>
|
||||
<define name="REF_MAX_R" value="180." unit="deg/s"/>
|
||||
<define name="REF_MAX_RDOT" value="RadOfDeg(1800.)"/>
|
||||
|
||||
<!-- feedback -->
|
||||
<define name="PHI_PGAIN" value="1000"/>
|
||||
<define name="PHI_DGAIN" value="400"/>
|
||||
<define name="PHI_IGAIN" value="200"/>
|
||||
|
||||
<define name="THETA_PGAIN" value="1000"/>
|
||||
<define name="THETA_DGAIN" value="400"/>
|
||||
<define name="THETA_IGAIN" value="200"/>
|
||||
|
||||
<define name="PSI_PGAIN" value="500"/>
|
||||
<define name="PSI_DGAIN" value="300"/>
|
||||
<define name="PSI_IGAIN" value="10"/>
|
||||
|
||||
<!-- feedforward -->
|
||||
<define name="PHI_DDGAIN" value="300"/>
|
||||
<define name="THETA_DDGAIN" value="300"/>
|
||||
<define name="PSI_DDGAIN" value="300"/>
|
||||
</section>
|
||||
|
||||
<section name="GUIDANCE_V" prefix="GUIDANCE_V_">
|
||||
<define name="HOVER_KP" value="150"/>
|
||||
<define name="HOVER_KD" value="80"/>
|
||||
<define name="HOVER_KI" value="20"/>
|
||||
<!--define name="NOMINAL_HOVER_THROTTLE" value="0.5"/-->
|
||||
</section>
|
||||
|
||||
<section name="GUIDANCE_H" prefix="GUIDANCE_H_">
|
||||
<define name="MAX_BANK" value="20" unit="deg"/>
|
||||
<define name="PGAIN" value="50"/>
|
||||
<define name="DGAIN" value="100"/>
|
||||
<define name="AGAIN" value="70"/>
|
||||
<define name="IGAIN" value="20"/>
|
||||
</section>
|
||||
|
||||
<section name="AUTOPILOT">
|
||||
<define name="MODE_MANUAL" value="AP_MODE_ATTITUDE_DIRECT"/>
|
||||
<define name="MODE_AUTO1" value="AP_MODE_HOVER_Z_HOLD"/>
|
||||
<define name="MODE_AUTO2" value="AP_MODE_NAV"/>
|
||||
</section>
|
||||
|
||||
<section name="BAT">
|
||||
<define name="CATASTROPHIC_BAT_LEVEL" value="9.3" unit="V"/>
|
||||
<define name="CRITIC_BAT_LEVEL" value="9.6" unit="V"/>
|
||||
<define name="LOW_BAT_LEVEL" value="9.7" unit="V"/>
|
||||
<define name="MAX_BAT_LEVEL" value="12.4" unit="V"/>
|
||||
</section>
|
||||
|
||||
</airframe>
|
||||
Reference in New Issue
Block a user