mirror of
https://github.com/paparazzi/paparazzi.git
synced 2026-05-28 01:53:48 +08:00
[chibios] Initial support for PX4FMU_v2
This commit is contained in:
Michal Podhradsky
@@ -0,0 +1,124 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
const PALConfig pal_default_config = {
|
||||
#if STM32_HAS_GPIOA
|
||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
|
||||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
|
||||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
|
||||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
|
||||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
|
||||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
|
||||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
|
||||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
|
||||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
|
||||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details This initialization must be performed just after stack setup
|
||||
* and before any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
#if HAL_USE_SDC || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief SDC card detection.
|
||||
*/
|
||||
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
|
||||
|
||||
(void)sdcp;
|
||||
return !palReadPad(GPIOB, GPIOB_SDIO_DETECT);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SDC card write protection detection.
|
||||
*/
|
||||
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
|
||||
|
||||
(void)sdcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif /* HAL_USE_SDC */
|
||||
|
||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief MMC_SPI card detection.
|
||||
*/
|
||||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief MMC_SPI card write protection detection.
|
||||
*/
|
||||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
}
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,20 @@
|
||||
#
|
||||
# ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
#
|
||||
# Required include directories
|
||||
BOARDINC = $(CHIBIOS_BOARD_DIR)
|
||||
|
||||
# List of all the board related files.
|
||||
BOARDSRC = ${BOARDINC}/board.c
|
||||
@@ -0,0 +1,239 @@
|
||||
/* CHIBIOS FIX */
|
||||
#include "ch.h"
|
||||
|
||||
/*---------------------------------------------------------------------------/
|
||||
/ FatFs - FAT file system module configuration file R0.10b (C)ChaN, 2014
|
||||
/---------------------------------------------------------------------------*/
|
||||
|
||||
#ifndef _FFCONF
|
||||
#define _FFCONF 8051 /* Revision ID */
|
||||
|
||||
|
||||
/*---------------------------------------------------------------------------/
|
||||
/ Functions and Buffer Configurations
|
||||
/---------------------------------------------------------------------------*/
|
||||
|
||||
#define _FS_TINY 0 /* 0:Normal or 1:Tiny */
|
||||
/* When _FS_TINY is set to 1, it reduces memory consumption _MAX_SS bytes each
|
||||
/ file object. For file data transfer, FatFs uses the common sector buffer in
|
||||
/ the file system object (FATFS) instead of private sector buffer eliminated
|
||||
/ from the file object (FIL). */
|
||||
|
||||
|
||||
#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */
|
||||
/* Setting _FS_READONLY to 1 defines read only configuration. This removes
|
||||
/ writing functions, f_write(), f_sync(), f_unlink(), f_mkdir(), f_chmod(),
|
||||
/ f_rename(), f_truncate() and useless f_getfree(). */
|
||||
|
||||
|
||||
#define _FS_MINIMIZE 0 /* 0 to 3 */
|
||||
/* The _FS_MINIMIZE option defines minimization level to remove API functions.
|
||||
/
|
||||
/ 0: All basic functions are enabled.
|
||||
/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
|
||||
/ f_truncate() and f_rename() function are removed.
|
||||
/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
|
||||
/ 3: f_lseek() function is removed in addition to 2. */
|
||||
|
||||
|
||||
#define _USE_STRFUNC 2 /* 0:Disable or 1-2:Enable */
|
||||
/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
|
||||
|
||||
|
||||
#define _USE_MKFS 1 /* 0:Disable or 1:Enable */
|
||||
/* To enable f_mkfs() function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
|
||||
|
||||
|
||||
#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */
|
||||
/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
|
||||
|
||||
|
||||
#define _USE_LABEL 0 /* 0:Disable or 1:Enable */
|
||||
/* To enable volume label functions, set _USE_LAVEL to 1 */
|
||||
|
||||
|
||||
#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */
|
||||
/* To enable f_forward() function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
|
||||
|
||||
|
||||
/*---------------------------------------------------------------------------/
|
||||
/ Locale and Namespace Configurations
|
||||
/---------------------------------------------------------------------------*/
|
||||
|
||||
#define _CODE_PAGE 1252
|
||||
/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
|
||||
/ Incorrect setting of the code page can cause a file open failure.
|
||||
/
|
||||
/ 932 - Japanese Shift_JIS (DBCS, OEM, Windows)
|
||||
/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)
|
||||
/ 949 - Korean (DBCS, OEM, Windows)
|
||||
/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)
|
||||
/ 1250 - Central Europe (Windows)
|
||||
/ 1251 - Cyrillic (Windows)
|
||||
/ 1252 - Latin 1 (Windows)
|
||||
/ 1253 - Greek (Windows)
|
||||
/ 1254 - Turkish (Windows)
|
||||
/ 1255 - Hebrew (Windows)
|
||||
/ 1256 - Arabic (Windows)
|
||||
/ 1257 - Baltic (Windows)
|
||||
/ 1258 - Vietnam (OEM, Windows)
|
||||
/ 437 - U.S. (OEM)
|
||||
/ 720 - Arabic (OEM)
|
||||
/ 737 - Greek (OEM)
|
||||
/ 775 - Baltic (OEM)
|
||||
/ 850 - Multilingual Latin 1 (OEM)
|
||||
/ 858 - Multilingual Latin 1 + Euro (OEM)
|
||||
/ 852 - Latin 2 (OEM)
|
||||
/ 855 - Cyrillic (OEM)
|
||||
/ 866 - Russian (OEM)
|
||||
/ 857 - Turkish (OEM)
|
||||
/ 862 - Hebrew (OEM)
|
||||
/ 874 - Thai (OEM, Windows)
|
||||
/ 1 - ASCII (Valid for only non-LFN configuration) */
|
||||
|
||||
|
||||
#define _USE_LFN 2 /* 0 to 3 */
|
||||
#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */
|
||||
/* The _USE_LFN option switches the LFN feature.
|
||||
/
|
||||
/ 0: Disable LFN feature. _MAX_LFN has no effect.
|
||||
/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
|
||||
/ 2: Enable LFN with dynamic working buffer on the STACK.
|
||||
/ 3: Enable LFN with dynamic working buffer on the HEAP.
|
||||
/
|
||||
/ When enable LFN feature, Unicode handling functions ff_convert() and ff_wtoupper()
|
||||
/ function must be added to the project.
|
||||
/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When use stack for the
|
||||
/ working buffer, take care on stack overflow. When use heap memory for the working
|
||||
/ buffer, memory management functions, ff_memalloc() and ff_memfree(), must be added
|
||||
/ to the project. */
|
||||
|
||||
|
||||
#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */
|
||||
/* To switch the character encoding on the FatFs API (TCHAR) to Unicode, enable LFN
|
||||
/ feature and set _LFN_UNICODE to 1. This option affects behavior of string I/O
|
||||
/ functions. This option must be 0 when LFN feature is not enabled. */
|
||||
|
||||
|
||||
#define _STRF_ENCODE 3 /* 0:ANSI/OEM, 1:UTF-16LE, 2:UTF-16BE, 3:UTF-8 */
|
||||
/* When Unicode API is enabled by _LFN_UNICODE option, this option selects the character
|
||||
/ encoding on the file to be read/written via string I/O functions, f_gets(), f_putc(),
|
||||
/ f_puts and f_printf(). This option has no effect when Unicode API is not enabled. */
|
||||
|
||||
|
||||
#define _FS_RPATH 2 /* 0 to 2 */
|
||||
/* The _FS_RPATH option configures relative path feature.
|
||||
/
|
||||
/ 0: Disable relative path feature and remove related functions.
|
||||
/ 1: Enable relative path. f_chdrive() and f_chdir() function are available.
|
||||
/ 2: f_getcwd() function is available in addition to 1.
|
||||
/
|
||||
/ Note that output of the f_readdir() fnction is affected by this option. */
|
||||
|
||||
|
||||
/*---------------------------------------------------------------------------/
|
||||
/ Drive/Volume Configurations
|
||||
/---------------------------------------------------------------------------*/
|
||||
|
||||
#define _VOLUMES 1
|
||||
/* Number of volumes (logical drives) to be used. */
|
||||
|
||||
|
||||
#define _STR_VOLUME_ID 0 /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */
|
||||
#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
|
||||
/* When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
|
||||
/ number in the path name. _VOLUME_STRS defines the drive ID strings for each logical
|
||||
/ drives. Number of items must be equal to _VOLUMES. Valid characters for the drive ID
|
||||
/ strings are: 0-9 and A-Z. */
|
||||
|
||||
|
||||
#define _MULTI_PARTITION 0 /* 0:Single partition, 1:Enable multiple partition */
|
||||
/* By default(0), each logical drive number is bound to the same physical drive number
|
||||
/ and only a FAT volume found on the physical drive is mounted. When it is set to 1,
|
||||
/ each logical drive number is bound to arbitrary drive/partition listed in VolToPart[].
|
||||
*/
|
||||
|
||||
|
||||
#define _MIN_SS 512
|
||||
#define _MAX_SS 512
|
||||
/* These options configure the range of sector size to be supported. (512, 1024, 2048 or
|
||||
/ 4096) Always set both 512 for most systems, all memory card and harddisk. But a larger
|
||||
/ value may be required for on-board flash memory and some type of optical media.
|
||||
/ When _MAX_SS is larger than _MIN_SS, FatFs is configured to variable sector size and
|
||||
/ GET_SECTOR_SIZE command must be implemented to the disk_ioctl() function. */
|
||||
|
||||
|
||||
#define _USE_ERASE 1 /* 0:Disable or 1:Enable */
|
||||
/* To enable sector erase feature, set _USE_ERASE to 1. Also CTRL_ERASE_SECTOR command
|
||||
/ should be added to the disk_ioctl() function. */
|
||||
|
||||
|
||||
#define _FS_NOFSINFO 0 /* 0 to 3 */
|
||||
/* If you need to know correct free space on the FAT32 volume, set bit 0 of this option
|
||||
/ and f_getfree() function at first time after volume mount will force a full FAT scan.
|
||||
/ Bit 1 controls the last allocated cluster number as bit 0.
|
||||
/
|
||||
/ bit0=0: Use free cluster count in the FSINFO if available.
|
||||
/ bit0=1: Do not trust free cluster count in the FSINFO.
|
||||
/ bit1=0: Use last allocated cluster number in the FSINFO if available.
|
||||
/ bit1=1: Do not trust last allocated cluster number in the FSINFO.
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/*---------------------------------------------------------------------------/
|
||||
/ System Configurations
|
||||
/---------------------------------------------------------------------------*/
|
||||
|
||||
#define _FS_REENTRANT 1 /* 0:Disable or 1:Enable */
|
||||
#define _FS_TIMEOUT MS2ST(1000) /* Timeout period in unit of time tick */
|
||||
#define _SYNC_t semaphore_t* /* O/S dependent sync object type. e.g. HANDLE, OS_EVENT*, ID, SemaphoreHandle_t and etc.. */
|
||||
/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs module.
|
||||
/
|
||||
/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
|
||||
/ 1: Enable re-entrancy. Also user provided synchronization handlers,
|
||||
/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
|
||||
/ function must be added to the project.
|
||||
*/
|
||||
|
||||
|
||||
#define _WORD_ACCESS 1 /* 0 or 1 */
|
||||
/* The _WORD_ACCESS option is an only platform dependent option. It defines
|
||||
/ which access method is used to the word data on the FAT volume.
|
||||
/
|
||||
/ 0: Byte-by-byte access. Always compatible with all platforms.
|
||||
/ 1: Word access. Do not choose this unless under both the following conditions.
|
||||
/
|
||||
/ * Address misaligned memory access is always allowed for ALL instructions.
|
||||
/ * Byte order on the memory is little-endian.
|
||||
/
|
||||
/ If it is the case, _WORD_ACCESS can also be set to 1 to improve performance and
|
||||
/ reduce code size. Following table shows an example of some processor types.
|
||||
/
|
||||
/ ARM7TDMI 0 ColdFire 0 V850E2 0
|
||||
/ Cortex-M3 0 Z80 0/1 V850ES 0/1
|
||||
/ Cortex-M0 0 RX600(LE) 0/1 TLCS-870 0/1
|
||||
/ AVR 0/1 RX600(BE) 0 TLCS-900 0/1
|
||||
/ AVR32 0 RL78 0 R32C 0
|
||||
/ PIC18 0/1 SH-2 0 M16C 0/1
|
||||
/ PIC24 0 H8S 0 MSP430 0
|
||||
/ PIC32 0 H8/300H 0 x86 0/1
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
#define _FS_LOCK 0 /* 0:Disable or >=1:Enable */
|
||||
/* To enable file lock control feature, set _FS_LOCK to non-zero value.
|
||||
/ The value defines how many files/sub-directories can be opened simultaneously
|
||||
/ with file lock control. This feature uses bss _FS_LOCK * 12 bytes.
|
||||
/
|
||||
/ IMPORTANT NOTE:
|
||||
/ For Paparazzi, we don't need file locking since all file are written sequentially
|
||||
/ from one thread (thdSdLog)
|
||||
/
|
||||
*/
|
||||
|
||||
|
||||
|
||||
#endif /* _FFCONF */
|
||||
@@ -0,0 +1,396 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
/*
|
||||
* STM32F4xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F4xx_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_CLOCK48_REQUIRED TRUE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PLLM_VALUE 24
|
||||
#define STM32_PLLN_VALUE 336
|
||||
#define STM32_PLLP_VALUE 2
|
||||
#define STM32_PLLQ_VALUE 7
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV4
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
#define STM32_RTCPRE_VALUE 8
|
||||
#define STM32_MCO1SEL STM32_MCO1SEL_HSI
|
||||
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
|
||||
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
|
||||
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
|
||||
#define STM32_I2SSRC STM32_I2SSRC_CKIN
|
||||
#define STM32_PLLI2SN_VALUE 192
|
||||
#define STM32_PLLI2SR_VALUE 5
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_BKPRAM_ENABLE FALSE
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV8
|
||||
#define STM32_ADC_USE_ADC1 TRUE
|
||||
#define STM32_ADC_USE_ADC2 FALSE
|
||||
#define STM32_ADC_USE_ADC3 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
|
||||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
|
||||
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC3_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 6
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
|
||||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6
|
||||
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#if USE_CAN1
|
||||
#define STM32_CAN_USE_CAN1 TRUE
|
||||
#else
|
||||
#define STM32_CAN_USE_CAN1 FALSE
|
||||
#endif
|
||||
#if USE_CAN2
|
||||
#define STM32_CAN_USE_CAN2 TRUE
|
||||
#else
|
||||
#define STM32_CAN_USE_CAN2 FALSE
|
||||
#endif
|
||||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
|
||||
#define STM32_CAN_CAN2_IRQ_PRIORITY 11
|
||||
|
||||
/*
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH2 FALSE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
|
||||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI21_IRQ_PRIORITY 15
|
||||
#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM5 FALSE
|
||||
#define STM32_GPT_USE_TIM6 FALSE
|
||||
#define STM32_GPT_USE_TIM7 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_USE_TIM9 FALSE
|
||||
#define STM32_GPT_USE_TIM11 FALSE
|
||||
#define STM32_GPT_USE_TIM12 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM6_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM7_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM9_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM11_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM12_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#if USE_I2C1
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
#else
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#endif
|
||||
#if USE_I2C2
|
||||
#define STM32_I2C_USE_I2C2 TRUE
|
||||
#else
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#endif
|
||||
#if USE_I2C3
|
||||
#define STM32_I2C_USE_I2C3 TRUE
|
||||
#else
|
||||
#define STM32_I2C_USE_I2C3 FALSE
|
||||
#endif
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 TRUE
|
||||
#ifdef USE_PWM_INPUT2
|
||||
#define STM32_ICU_USE_TIM2 TRUE
|
||||
#else
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#endif
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM5 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_USE_TIM9 TRUE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM9_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* MAC driver system settings.
|
||||
*/
|
||||
#define STM32_MAC_TRANSMIT_BUFFERS 2
|
||||
#define STM32_MAC_RECEIVE_BUFFERS 4
|
||||
#define STM32_MAC_BUFFERS_SIZE 1522
|
||||
#define STM32_MAC_PHY_TIMEOUT 100
|
||||
#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE
|
||||
#define STM32_MAC_ETH1_IRQ_PRIORITY 13
|
||||
#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#ifndef STM32_PWM_USE_TIM2
|
||||
#define STM32_PWM_USE_TIM2 TRUE
|
||||
#endif
|
||||
#ifndef STM32_PWM_USE_TIM3
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#endif
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM5 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_USE_TIM9 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM9_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#if USE_UART1
|
||||
#define STM32_SERIAL_USE_USART1 TRUE
|
||||
#else
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#endif
|
||||
#if USE_UART2
|
||||
#define STM32_SERIAL_USE_USART2 TRUE
|
||||
#else
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#endif
|
||||
#if USE_UART3
|
||||
#define STM32_SERIAL_USE_USART3 TRUE
|
||||
#else
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#endif
|
||||
#if USE_UART4
|
||||
#define STM32_SERIAL_USE_UART4 TRUE
|
||||
#else
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#endif
|
||||
#if USE_UART5
|
||||
#define STM32_SERIAL_USE_UART5 TRUE
|
||||
#else
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
#endif
|
||||
#if USE_UART6
|
||||
#define STM32_SERIAL_USE_USART6 TRUE
|
||||
#else
|
||||
#define STM32_SERIAL_USE_USART6 FALSE
|
||||
#endif
|
||||
#define STM32_SERIAL_USART1_PRIORITY 12
|
||||
#define STM32_SERIAL_USART2_PRIORITY 12
|
||||
#define STM32_SERIAL_USART3_PRIORITY 12
|
||||
#define STM32_SERIAL_UART4_PRIORITY 12
|
||||
#define STM32_SERIAL_UART5_PRIORITY 12
|
||||
#define STM32_SERIAL_USART6_PRIORITY 12
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#if USE_SPI1
|
||||
#define STM32_SPI_USE_SPI1 TRUE
|
||||
#else
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#endif
|
||||
#if USE_SPI2
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#else
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#endif
|
||||
#if USE_SPI3
|
||||
#define STM32_SPI_USE_SPI3 TRUE
|
||||
#else
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#endif
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USE_UART4 FALSE
|
||||
#define STM32_UART_USE_UART5 FALSE
|
||||
#define STM32_UART_USE_USART6 FALSE
|
||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) // Not used: conflict SPI1
|
||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
|
||||
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
|
||||
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6)
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART3_IRQ_PRIORITY 12
|
||||
#define STM32_UART_UART4_IRQ_PRIORITY 12
|
||||
#define STM32_UART_UART5_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART6_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 1
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART4_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART5_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART6_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_OTG1 TRUE // FS, DFU_BOOT
|
||||
#define STM32_USB_USE_OTG2 FALSE // HS
|
||||
#define STM32_USB_OTG1_IRQ_PRIORITY 14
|
||||
#define STM32_USB_OTG2_IRQ_PRIORITY 14
|
||||
#define STM32_USB_OTG1_RX_FIFO_SIZE 512
|
||||
#define STM32_USB_OTG2_RX_FIFO_SIZE 512
|
||||
#define STM32_USB_OTG_THREAD_PRIO HIGHPRIO
|
||||
#define STM32_USB_OTG_THREAD_STACK_SIZE 256
|
||||
#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
|
||||
|
||||
|
||||
/*
|
||||
* SDC driver system settings.
|
||||
*/
|
||||
#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
|
||||
#define STM32_SDC_SDIO_DMA_PRIORITY 3
|
||||
#define STM32_SDC_SDIO_IRQ_PRIORITY 9
|
||||
#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10
|
||||
#define STM32_SDC_SDIO_UNALIGNED_SUPPORT FALSE
|
||||
#define STM32_SDC_WRITE_TIMEOUT_MS 250
|
||||
#define STM32_SDC_READ_TIMEOUT_MS 15
|
||||
#define SDLOG_ALL_BUFFERS_SIZE 8192
|
||||
#define SDLOG_MAX_MESSAGE_LEN 252
|
||||
#define SDLOG_QUEUE_BUCKETS 1024
|
||||
|
||||
/*
|
||||
* workaround hardware bug in REV.A revision of old STM32F4 (sold in 2012, early 2013)
|
||||
*/
|
||||
|
||||
#define STM32_USE_REVISION_A_FIX 1
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
Reference in New Issue
Block a user