Gregory Nutt 759e510c28 Per Matias Edlund: I recently used the tcflush function and found that it failed with ENOTTY. The reason is that the TCFLSH case in the function uart_ioctl in the file drivers/serial/serial.c does not update the ret value." On success, the TCFLSH IOCTL logic needs to explicitly set the return value (ret) to zero.

2018-03-26 13:54:47 -06:00

..

Kconfig

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-16550

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-lpuart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-sci

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-uart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-usart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

lowconsole.c

…

Make.defs

…

ptmx.c

…

pty.c

…

pty.h

…

serial_dma.c

…

serial_io.c

…

serial.c

Per Matias Edlund: I recently used the tcflush function and found that it failed with ENOTTY. The reason is that the TCFLSH case in the function uart_ioctl in the file drivers/serial/serial.c does not update the ret value." On success, the TCFLSH IOCTL logic needs to explicitly set the return value (ret) to zero.

2018-03-26 13:54:47 -06:00

tcdrain.c

…

uart_16550.c

…