Sebastien Lorquet ed50b14cee drivers/net/phy_notify.c: Use phy debug macros instead of net debug macros. ninfo() and nerr() are used a bit too much, so the console output is difficult to read with network debug.

2018-03-09 07:11:07 -06:00

..

dm90x0.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00

enc28j60.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00

enc28j60.h

…

encx24j600.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00

encx24j600.h

…

ftmac100.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00

Kconfig

drivers/net: Add support for telnet character mode

2018-01-09 20:19:26 +09:00

loopback.c

…

Make.defs

…

phy_notify.c

drivers/net/phy_notify.c: Use phy debug macros instead of net debug macros. ninfo() and nerr() are used a bit too much, so the console output is difficult to read with network debug.

2018-03-09 07:11:07 -06:00

skeleton.c

arch/arm/src/lpc54xx: Add some hooks for future 802.1q VLAN support. configs/lpcxpresso-lpc54628: Automatically bring up network in the netnsh configuration.

2018-01-02 08:49:09 -06:00

slip.c

Squashed commit of the following:

2018-01-31 16:11:54 -06:00

telnet.c

Merged in hardlulz/modem-3.0-nuttx/fix-sem-EINTR (pull request #603)

2018-02-20 18:24:53 +00:00

tun.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00