Gregory Nutt a1a2e53c3e Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis

2014-12-18 13:52:01 -06:00

..

analog

…

audio

…

binfmt

Oops.. part of the last change will still in the editor

2014-11-12 18:33:07 -06:00

crypto

…

eeprom

Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet

2014-12-05 09:13:34 -06:00

fs

SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit

2014-12-09 14:11:15 -06:00

input

Update the ADXL345 interface following the current interface scheme

2014-12-16 11:45:28 -06:00

lcd

Add driver for ST7565 that works with NHD‐C12864KGZ display. From Pierre-noel Bouteville.

2014-11-13 16:03:52 -06:00

mm

MM: Minimum memory allocation must to up to 32 if sizeof pointer is 8-bytes

2014-11-02 12:11:20 -06:00

mtd

SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit

2014-12-09 14:11:15 -06:00

net

Move IP header flags from tcp.h to ip.h and rename IP_FLAGS vs TCPFLAGS. The problem fixed here is that there IP flags were not available when TCP was disabled. The IP flags are used in ICMP and IGFMP

2014-11-17 17:16:46 -06:00

nx

Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville

2014-12-10 17:11:23 -06:00

power

…

sensors

Update the ADXL345 interface following the current interface scheme

2014-12-16 11:45:28 -06:00

sercomm

…

serial

…

spi

Add ADXL345 accelerometer driver. From Alan Carvalho de Assis

2014-12-16 08:16:53 -06:00

syslog

ARMv7: Add support to use ITM for SYSLOG debug output

2014-10-22 09:03:00 -06:00

usb

…

video

…

wireless

Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis

2014-12-18 13:52:01 -06:00

.gitignore

…

addrenv.h

…

arch.h

Fixes to tickless operation code. From Brandon Warhurst

2014-10-23 06:41:31 -06:00

ascii.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

can.h

…

clock.h

…

compiler.h

Defines inline functions as not instrumented - this is relevant for anyone using instrumentation. From Lorenz Meier.

2014-11-12 07:32:36 -06:00

configdata.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

float.h

…

i2c.h

…

init.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

irq.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

kmalloc.h

…

kthread.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

lib.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

math.h

…

mmcsd.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

mqueue.h

Repartition some message queue logic: sched/mqueue should have all mqueue knowledge; fs/mqueue should deal only with inodes

2014-09-30 08:03:39 -06:00

page.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

pgalloc.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

poff.h

…

progmem.h

…

pthread.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

pwm.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

regex.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

rtc.h

…

rwbuffer.h

…

sched.h

strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8.

2014-12-17 12:24:02 -06:00

scsi.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

sdio.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

semaphore.h

Complete re-implementation of mq_close

2014-09-29 15:33:34 -06:00

spawn.h

…

stdarg.h

…

streams.h

Implement setlogmask(); move some syslog logic from libc/syslog to fs/syslog

2014-10-08 19:08:26 -06:00

time.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

timer.h

…

tree.h

…

userspace.h

Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK

2014-10-11 15:59:40 -06:00

vt100.h

Add ANSI/VT100 color codes

2014-11-10 15:10:57 -06:00

watchdog.h

…

wdog.h

…

wqueue.h

Add description of work queues to the porting guide. Update comments

2014-10-14 10:21:18 -06:00