Dave Marples a2def2a4d1 arch/arm/src/common/up_lwl_console.c: Add support for a 'Lightweight Link' protocol between a target and debugger for use when you need a console but the target doesn't have a spare serial port or other available resource.

2019-06-03 07:31:17 -06:00

..

Kconfig

arch/arm/src/common/up_lwl_console.c: Add support for a 'Lightweight Link' protocol between a target and debugger for use when you need a console but the target doesn't have a spare serial port or other available resource.

2019-06-03 07:31:17 -06:00

Kconfig-16550

Squashed commit of the following:

2018-08-26 11:37:16 -06:00

Kconfig-lpuart

This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member.

2019-05-30 13:45:36 -06:00

Kconfig-sci

…

Kconfig-uart

…

Kconfig-usart

…

lowconsole.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

Make.defs

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00

ptmx.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

pty.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

pty.h

…

serial_dma.c

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00

serial_io.c

drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.

2018-09-02 15:36:25 -06:00

serial.c

Cosmetic

2019-05-26 12:33:42 -06:00

tcdrain.c

…

uart_16550.c

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00