Gregory Nutt 0d203fd535 drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00

..

cdcacm_desc.c

…

cdcacm.c

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00

cdcacm.h

…

cdcecm.c

All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.

2018-11-21 07:57:26 -06:00

cdcecm.h

…

composite_desc.c

…

composite.c

drivers/usbdev/cdcacm.c: This fixes a problem where the host sent a "get descriptor" message of type "standard" with a recipient of type "interface". Since the composite driver would only pass messages to the child interfaces when a message was not "standard", this message was not handled. I changed the condition so that the composite driver checks not only if this is a "standard" message but if it is also directed to the device. Otherwise, the handling is delegated to the children of the composite device.

2019-03-26 21:54:01 -06:00

composite.h

…

dfu.c

Updates from coding standard review of PRs 753 and 754

2018-11-09 07:44:22 -06:00

Kconfig

arch/arm/src/stm32f7: USB High speed for STM32F7 series

2019-04-07 19:05:06 -06:00

Make.defs

…

pl2303.c

…

rndis_std.h

…

rndis.c

Updates from coding standard review of PRs 753 and 754

2018-11-09 07:44:22 -06:00

usbdev_strings.c

…

usbdev_trace.c

…

usbdev_trprintf.c

…

usbmsc_desc.c

…

usbmsc_scsi.c

…

usbmsc.c

…

usbmsc.h

…