mirror of
https://github.com/apache/nuttx.git
synced 2026-06-04 06:42:32 +08:00
Gregory Nutt
56 lines
1.6 KiB
Plaintext
56 lines
1.6 KiB
Plaintext
README
|
|
======
|
|
|
|
This directory holds NuttX board support for the TI LaunchXL-CC1310. This
|
|
board features the CC1310F128 part with 128Kb of FLASH and 20Kb of SRAM.
|
|
|
|
Contents
|
|
========
|
|
|
|
o Status
|
|
o Serial Console
|
|
o LEDs and Buttons
|
|
o Using J-Link
|
|
|
|
Status
|
|
======
|
|
|
|
2019-01-21: Fragmentary board support in place. The initial intent
|
|
of this board support is simply to assist in the CC13x0 architecture
|
|
development. Serious board development will occur later. At present,
|
|
the CC13x0 does not even compile error-free: Compilation of cc14x0_rom.c
|
|
fails because the DDI0 OSC header file has not yet been ported.
|
|
|
|
Serial Console
|
|
==============
|
|
|
|
The on-board XDS110 Debugger provide a USB virtual serial console using
|
|
UART0 (PA0/U0RX and PA1/U0TX).
|
|
|
|
LEDs and Buttons
|
|
================
|
|
|
|
LEDs
|
|
----
|
|
|
|
Buttons
|
|
-------
|
|
|
|
Using J-Link
|
|
============
|
|
|
|
Reference https://wiki.segger.com/CC1310_LaunchPad (for CC1310)
|
|
|
|
When shipped, the TI CC1310 LaunchPad evaluation board is configured to be
|
|
used with the on-board debug probe. In order to use it with J-Link, the
|
|
on-board debug probe needs to be isolated to make sure that it does not
|
|
drive the debug signals. This can be done by removing some jumpers next
|
|
to the XDS110 Out / CC1310 In connector [RXD, TXD, RST, TMS, TCK, TDO, TDI,
|
|
WDO]. After isolating the on-board probe, the CC130F128 device can be
|
|
debugged using J-Link. Please note, that the J-Link needs to be connected
|
|
to the board using the CC1310 using the micro JTAG connector marked "In".
|
|
|
|
The RXD/TXD can then be used for a Serial console using the appropriate
|
|
TTL adapter (TTL to RS-232 or TTL to USB serial).
|
|
|