fe8b3c5220
Networking: More detangling of IPv6 logic. Next steps will be more invasive and will get moved to a branch
2015-01-16 08:51:18 -06:00
5b45605991
Clean a few more IPv6 compilation issues; Add implementation of net_ipv6_maskcmp()
2015-01-15 15:55:52 -06:00
630366272a
Networking: Seperate tcp_input() and udp_input() into seprate functions tcp_ipv4_input(), tcp_ipv6_input(), udp_ipv4_input(), and upd_ipv6_input() than can deal will the data offsets caused by the differing sizes of the IP header.
2015-01-15 15:06:46 -06:00
60e50ff3b5
Networking: More IPv6 detanglement
2015-01-15 13:08:28 -06:00
5a441ce03b
Networking: Misck IPv6 detanglement
2015-01-15 12:19:44 -06:00
89538ac4a2
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
a49f0231d2
Networking: A few more IPv6-related fixes
2015-01-14 18:34:28 -06:00
a7ce1279f9
Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics.
2015-01-14 16:10:38 -06:00
7d68c22d7f
Networking: Add support for IPv6 ioctls
2015-01-14 13:03:12 -06:00
31a94816b2
USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts
2015-01-11 08:05:09 -06:00
089e001874
STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y
2015-01-08 18:12:06 -06:00
1842525cc2
MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy.
...
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.
This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.
From David Sidrane
2015-01-08 06:23:42 -06:00
2b522bab9e
Update ChangeLog
2015-01-06 10:52:05 -06:00
e9cec9057b
There were some changes which broke my NuttX-Build. With these two patches it builds again. From Manuel Stühn
2015-01-01 15:56:25 -06:00
cf651e0ce3
Fix warning caused by missing comment closing */. From David Sidrane.
2014-12-30 06:22:18 -06:00
b4f235c33f
Added forward reference to eliminate warnings. From David Sidrane.
2014-12-30 06:20:40 -06:00
1bfec1a702
Fixes warning about block_operations not being defined. From David Sidrane.
2014-12-30 06:19:30 -06:00
089578319a
STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane
2014-12-27 18:58:18 -06:00
aefde565d3
Serial Upper Half: Add watermarks to RX flow control logic
2014-12-27 07:43:06 -06:00
6daa9468f6
More RAMTRON related fixes from David Sidrane
2014-12-26 08:15:59 -06:00
996d6c9d55
Most superstitous updates to the RAMTROM driver make it more compatibile with the version used by PX4. From David Sidrane
2014-12-26 07:59:09 -06:00
fa5dffbc18
STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review
2014-12-19 14:52:17 -06:00
7a874e5d4c
ili9341: update interface control definitions
...
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com >
2014-12-19 13:52:40 -06:00
3ce3b168f8
stm32: Add interface description for ltdc controller. This defines the interface to perform hardware accelerated layer operation by the ltdc controller.
...
The following methods must be supported by the implementation:
- gevideoinfo
- getplaneinfo
- getlid
- setclut
- getclut
- setcolor
- getcolor
- setcolorkey
- getcolorkey
- setalpha
- getalpha
- setblendmode
- getblendmode
- setarea
- getarea
- update
And if DMA2D is supported:
- blit
- blend
The method up_ltdcgetlayer provides access to a reference of a specific ltdc
layer.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com >
2014-12-19 13:45:18 -06:00
a1a2e53c3e
Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis
2014-12-18 13:52:01 -06:00
937f9f23f1
strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8.
2014-12-17 12:24:02 -06:00
d818ab5e35
Update the ADXL345 interface following the current interface scheme
2014-12-16 11:45:28 -06:00
c9ca51fc8a
Minor clean-up associated with the ADX345 driver
2014-12-16 10:18:44 -06:00
ae18f9dacd
Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg()
2014-12-16 09:54:32 -06:00
10863af628
Add ADXL345 accelerometer driver. From Alan Carvalho de Assis
2014-12-16 08:16:53 -06:00
16f5ea451b
Fix cosmetic typo in header file idempotence. Note by Lazlo
2014-12-10 18:27:29 -06:00
cb76fc05fc
Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville
2014-12-10 17:11:23 -06:00
cdc8fc52d1
SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit
2014-12-09 14:11:15 -06:00
69cb752813
Add CRC8 support. From Ken Pettit
2014-12-09 13:27:22 -06:00
7f59a64f42
stdint.h: Don't use hex values to specify minimum values of fixed width, signed values. Hex values are inherently unsigned and not usable for this purpose in all contexts
2014-12-08 11:44:52 -06:00
1b5e296489
Add sys/custom_file.h. Used when CUSTOM_FILE_IO is define and avoids re-definition errors about the FILE define. From Thomas Gruber via the PX4 repository
2014-12-06 12:10:08 -06:00
ad05793c0f
msg type should be char * not void * in mq_send, mq_timedsend, mq_receive, and mq_timedreceive. Noted by Pierre-Noel Bouteville
2014-12-05 19:16:14 -06:00
c0c108d5e2
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
2014-12-05 09:13:34 -06:00
76906110b0
Correct spelling: MOUNTPOINT not MOUNTPOUNT. Numerous places. Some are problems. From Woohan Lee
2014-12-01 06:41:30 -06:00
7ad7163bd3
Updated comments
2014-11-29 17:39:40 -06:00
1fa790cf8e
Update comments
2014-11-29 15:28:28 -06:00
ba58b37e46
Re-arrange the AJOYSTICK data structure so that it matches the mouse structure
2014-11-29 13:26:26 -06:00
4657f5c870
Update some Documentation and comments associated with the last ioctl change
2014-11-29 13:25:29 -06:00
e31d5125ae
Add support for a variadic ioctl() function. The ioctl() interface is a non-standard, Unix interface. NuttX has always used the older, three-parameter version. Most contemporary systems now, however, use a variadic form of the ioctl() function. Added an option to insert a shim layer to adapt the three-parameter ioctl() to use the variadic interface form. Internally, the ioctl handling is the same three-parameter logic. The only real complexity to the shim is in how the system calls must be handled.
2014-11-29 10:53:22 -06:00
19d31412f7
Update/correct some comments
2014-11-29 07:08:30 -06:00
2b8fe6709b
Add an analog joystick driver. Initial checkin is only a little more of a clone of the discrete joystick driver and is as-of-yet untested
2014-11-28 19:59:27 -06:00
36ac0d2cf4
Add an interface definition header file for an analog joystick device
2014-11-28 19:27:42 -06:00
544322edb9
DJoystick: Add a new ioctl to get the support joystick discrete signals
2014-11-28 15:39:57 -06:00
421c81b315
STM3210E-EVAL: Add a DJoystick driver
2014-11-28 13:31:09 -06:00
bd93ba55c5
Cosmetic change to comment
2014-11-28 09:06:05 -06:00
Gregory Nutt