N/A
When SIM_SPI is valid, a specified Linux SPI device ‘spidevN.P’(N is bus number and P is CS number) is attached to nuttx simulator, shown as 'spi0' under /dev. One may type spi command (need SPITOOL valid) in NSH to control the Linux SPI and exchange data, other devices such sensors can use it to debug in simulator on a Ubuntu PC. Note that a USB<>SPI module (e.g. CH341A/B) should be plugged in to achieve Linux SPI ports.
Change-Id: I275b2c2bbf6d14bcdf514c89efb9a2264d69e9a3
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
so the source code compiled by host environment can include config.h
directly and then avoid pass Kconfig option through Makefile manually
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic9fe6f846082cef2d0808dc717df8ae6ed929edf
BOARDIOC_SWITCH_BOOT is required to communicate the boot partition from
userspace (OTA subsystem) to board. It can be used to change the system
boot behavior. So it's useful for A/B boot or even single boot case.
For the board support A/B boot case:
1. Download the new image from the sever
2. Write the new image to the alternative partition
3. Call BOARDCTL_SWITCH_BOOT to the alternative system
For single boot partition case:
1. Download the new image from the sever
2. Call BOARDCTL_SWITCH_BOOT and reboot to a small system
3. Write the new image to the main partition in the small system
4. Call BOARDCTL_SWITCH_BOOT again to the main system
Change-Id: Ifebb495784ecf06842946a249bec64f75dce894f
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
N/A
Move miwear boards file to vendor/xiaomi/miwear/boards,so this link is
not needed.
Signed-off-by: 丁欣童 <dingxintong@xiaomi.com>
Change-Id: I39754ca6399dec8e87137fd4304347545988b0af
1. Added check for repeated connection wifi operations.
2. Invoke the carrier on/off operation in the wrong place.
3. The RTC initialization time is incorrect.
4. Reserve 32K I-Cache space in the linker script.
5. Increase the size of the wifi firmware receiving buffer.
Signed-off-by: Virus.V <virusv@live.com>
ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `locked'
ld: section .paged LMA [0000000011034000,0000000011040fa3] overlaps section .data LMA [0000000011033ff4,00000000110340e3]
ld: region `locked' overflowed by 228 bytes
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- This commit adds CONFIG_NET_TCP_WRITE_BUFFERS=y to
rndis and rndis_smp defconfigs
Impact:
- webserver performance will be improved
Testing:
- Tested with nxplayer, telnetd, webserver, iperf
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds the following to smp/defconfig
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_STACK_COLORATION=y
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
to avoid the code duplication and ensure the consistent behaviour
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I3fa9ba13d3f8abf882907782708f52c788d0c813
Summary:
- This commit removes SMP features from nsh/defconfig
because it's still unstable
Impact:
- None
Testing:
- None
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
to avoid the follow link error:
ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `flash'
ld: region `flash' overflowed by 4 bytes
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that spresense:rndis_smp and spresense:wifi_smp
do not boot due to the recent change in nx_start.c
- As the result of the discussion, I understand that we have to
add CONFIG_BOARD_LATE_INITIALIZE=y for SMP
Impact:
- spresense only
Testing:
- Tested with spresense:rndis_smp and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
Xiang Xiao
chao.an
liucheng5
liuhaitao
丁欣童
Virus.V
Dong Heng
Jiuzhu Dong
danguanghua
Masayuki Ishikawa
Daniel P. Carvalho
transistorretorcido
chenwen
Nathan Hartman
SPRESENSE
ligd