e3b3e57e56
RTC: add interface for check if RTC time has been set
...
New interface allows checking if RTC time has been set. This allows to application to detect if RTC has valid time (after
reset) or should application attempt to get real time by other means (for example, by launching ntpclient or GPS).
2017-04-06 09:53:11 -06:00
e2702cbe4e
STM32F7: fix UART7 and UART8 IFLOWCONTROL options
2017-04-06 08:46:24 -06:00
cb70ce7d3c
6loWPAN: Correct some IPv6 addresses and operations on IPv6 addresses.
2017-04-05 12:11:09 -06:00
d64d4e02b4
sensors: lis2dh: fix hardfault when reading from unconfigured sensor
2017-04-04 07:38:49 -06:00
dfe6a672c1
drivers/sensors: Add driver for ST LIS2DH accelerometer. From Timo Voutilainen <time.voutilainen@haltian.com> et al.
2017-04-03 07:28:22 -06:00
52ead055fd
6loWPAN: Beginning of IEEE802.15.4 frame input logic.
2017-04-01 09:07:49 -06:00
9d13a2463f
drivers/usbmisc: Add driver for Fairchild FUSB301 USB type-C controller.
...
From Harri Luhtala <harri.luhtala@haltian.com >. Tested with earlier
version of NuttX; with current version checked that it compiles.
2017-03-31 06:35:36 -06:00
b5b148fef8
drivers/sensors: Add driver for ST LPS25H pressure sensor
2017-03-31 05:53:43 -06:00
916bd8a48f
HTS221 driver: Modify to use new interrupt parameter passing hooks.
2017-03-31 05:31:35 -06:00
9e2b3da3e8
drivers/sensors: Add driver for ST HTS221 humidity sensor
2017-03-30 12:17:23 -06:00
dffb8a67e3
Add entropy pool and strong random number generator
...
Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output.
Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
2017-03-30 07:38:37 -06:00
91f96b6ecb
drivers/analog: Add driver for the LTC1767L ADC.
2017-03-28 06:34:37 -06:00
6c4dac459a
lcd/: PCF8574 backpack logic needs to include poll.h CONFIG_DISABLE_POLL is not set.
2017-03-27 12:28:34 -06:00
7d57a2b2bd
Trivial changes from review of last PR.
2017-03-25 10:38:41 -06:00
be8207d493
drivers/analog: Add basic COMP driver
2017-03-25 16:50:11 +01:00
f50a075373
Merged in masayuki2009/nuttx.nuttx/lcd_aqm_1248a_support (pull request #287 )
...
drivers/lcd/st7565.c: Use ST7565_POWERCTRL_INT instead of ST7565_POWERCTRL_BRF
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-03-21 23:45:47 +00:00
e336d24898
drivers/lcd/st7565.c: Use ST7565_POWERCTRL_INT instead of ST7565_POWERCTRL_BRF
2017-03-22 08:21:22 +09:00
d4e7213ddc
Merged in masayuki2009/nuttx.nuttx/lcd_aqm_1248a_support (pull request #283 )
...
drivers/lcd/st7565.c: Extend to include support for the AQM_1248A
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-03-21 13:27:42 +00:00
3872055daa
drivers/audio/wm8904: WM8904 has same problem as that fixed by Juha Niskanen in the MaxTouch driver.
2017-03-21 07:20:45 -06:00
c3d9b86662
input/mxt: prevent overriding i2c transfer return value
...
put_reg/get_reg function was overriding i2c transfer error code with i2creset return value, that lead to OK status although actual transfer failed.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com >
Reported-by: Harri Luhtala <harri.luhtala@haltian.com >
2017-03-21 07:12:07 -06:00
591f91ebd3
drivers/lcd/st7565.c: Extend to include support for the AQM_1248A
2017-03-21 15:30:23 +09:00
a10735b50d
mtd/progmem: fix incorrect target address calculation
...
progmem_read/write() is incorrectly calculating the target address,
expecting the offset argument is given in a block number. This is
completely wrong and as a result invalid flash region is accessed.
Byte-oriented read/write interfaces of mtd device accept the
target address in a byte offset, not a block number.
Signed-off-by: Heesub Shin <heesub.shin@samsung.com >
2017-03-19 01:11:37 +09:00
175f8960cf
Cosmetic changes from review of last PR
2017-03-18 06:47:34 -06:00
0a95536b85
Adds driver support for the XBox One controller. Currently only the latest version (XBox One X) controller works. The older XBox One controllers do not enumerate correctly.
2017-03-17 20:48:21 -07:00
57a1360c84
Add option to enable wireless debug output.
2017-03-15 14:31:01 -06:00
e10ce5ce51
Photon: add basic support for wlan chip
2017-03-12 16:57:59 +01:00
399f306744
A few cosmetic changes
2017-03-11 08:58:42 -06:00
04b2964eac
drivers/wireless/nrf24l01.c: Review last PR. Also got enthused and did major re-work to file to bring it closer to the NuttX coding style. Fixed a few compile time warnings.
2017-03-10 17:29:58 -06:00
5534e0c493
multiple fixes in nrf24l01 driver
...
- signal POLLIN if there is already data in the FIFO
- send ETIMEDOUT to userspace after 2 seconds if TX IRQ was not received
- handle FIFO overflow
- handle invalid pipes/empty FIFO
- multiple cosmetics (missing static, duplicate define, missing \n)
2017-03-10 23:21:49 +01:00
c0769c9988
Merged in andreasBihlmaier/nuttx/fix-as5048b (pull request #255 )
...
fix as5048b by adding missing frequency parameter
Approved-by: Gregory Nutt
2017-03-09 12:57:47 +00:00
e1da80af5b
fix as5048b by adding missing frequency parameter
2017-03-09 12:01:01 +01:00
164546a65c
increase number of supported PWM channels from 4 to 6
2017-03-09 11:54:37 +01:00
6f4b8c9e60
Merged in no1wudi/nuttx (pull request #241 )
...
fixed the debug method selection of ssd1306
Approved-by: Gregory Nutt
2017-03-07 13:36:26 +00:00
ce2845c5c3
usbhost_cdcacm: fix tx outbuffer overflow and remove now invalid assert
2017-03-07 06:59:00 -06:00
5528b2836c
fixed the debug method selection of ssd1306
2017-03-07 19:49:18 +08:00
1e6ab4763c
typos
2017-03-05 13:04:07 +00:00
c976a66f8d
net/drivers/skeleton.c: Back out serialization changes of the last commit. They are not necessary in the skeleton.c example because the calls to net_lock() at the beginning of each worker function will enforce serialization.
2017-03-04 11:33:36 -06:00
e2eb5f1ae0
drivers/net: Add framework for serialization in the case where multiple low-priority work queues are used.
2017-03-04 09:45:09 -06:00
a8363528dc
net/phy_notify.c: Call to arch_phy_irq() missing new interrupt argument parameter.
2017-03-03 16:08:21 -06:00
86239d4a73
Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers.
2017-03-03 14:45:09 -06:00
f4bad1a280
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
f5f9d82d5a
arch_phy_irq: Now returns int instead of xcpt_t oldhandler. The oldhandler is useless after the changes to the interrupt argument. Also access an argument for the PHY interrupt. phy_notify.c driver changed to exploit new interrupt argument passing.
2017-03-02 08:43:33 -06:00
35b2448203
Merged in w8jcik/nuttx (pull request #232 )
...
some simple typos
Approved-by: Gregory Nutt
2017-03-01 15:25:42 +00:00
28226198a7
memlcd: Mark Schulte <mark@mjs.pw>
2017-03-01 08:52:58 -06:00
4a8aa6ae95
typos
2017-03-01 12:56:15 +01:00
ac6e552ff7
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:37:44 -06:00
ded155c638
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:22:58 -06:00
02b1e1ec1a
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:22:57 -06:00
704df7bd39
IRQ arguments: Fix errors discovered in build testing
2017-02-27 19:28:24 -06:00
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Jussi Kivilinna
Gregory Nutt
Juha Niskanen
Martin Lederhilger
raiden00pl
Masayuki Ishikawa
Heesub Shin
Brian Webb
Simon Piriou
Leif Jakob
Andreas Bihlmaier
ahb
no1wudi
Janne Rosberg
Maciej Wójcik
Mark Schulte