7fe112fe4c
Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition.
2017-05-13 11:44:12 -06:00
02535be36a
STM32F410. Add support for STM32Fr10. STM32F410 is a version of STM32F4 with 32 KB of RAM and 62 or 128 KB of flash.
2017-05-13 08:40:09 -06:00
c4a2e1399b
Merged in david_s5/nuttx/upstream_kinetis (pull request #368 )
...
kinetis:K66 GPIO and pin mux cleanup
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-05-13 10:37:20 +00:00
69a8aecbc8
kinetis:K66 define ALT1 to match ref manual
2017-05-12 17:21:54 -10:00
700e4ff5b6
kinetis:K66 fixed TMP2_CH1 definition
2017-05-12 17:03:27 -10:00
853d332b6c
Move CAN subsystem to its own directory and put device drivers there
...
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com >
2017-05-12 11:48:47 -03:00
46851b33b2
STM32L4: port stm32l4_serial_get_uart function from STM32F7
2017-05-12 15:54:48 +03:00
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
3091050963
STM32L4: Review of last PR + Move separate stm32l4_flash.h; move hardware-specific definitions to chip/stm32l4_flash.h
2017-05-11 06:58:39 -06:00
c74a51f789
STM32L4: add internal flash write support
2017-05-11 14:35:27 +03:00
4f18b40429
mtd/config: erase block between block read and write
2017-05-10 08:25:39 -06:00
e04ea9e3e3
Merged in juniskane/nuttx_stm32l4/stm32l4_dbgmcu_pr (pull request #361 )
...
STM32L4: add dbgmcu header files
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-05-09 17:06:32 +00:00
3d73a04259
Merged l432kc into master
2017-05-09 11:03:42 -06:00
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
ce1ad33289
STM32L4: add dbgmcu header files
2017-05-09 14:13:51 +03:00
d591d3ac4e
Restore settings for UARTs 4 and 5
2017-05-09 11:38:14 +02:00
5204f19e4f
fix typo found by Juha during review
2017-05-09 11:32:16 +02:00
c1cf1269c7
Adapt stm32l43x pin definitions
2017-05-09 10:58:04 +02:00
014b69e120
removed stray paren.
2017-05-08 22:56:05 +00:00
8406b40baa
Merged in david_s5/nuttx-16/david_s5/stm32serial-dma-buffer-round-off-not-up-1494258804216 (pull request #357 )
...
stm32:Serial DMA buffer round off not up
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-05-08 20:32:44 +00:00
aa11d637a8
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
2017-05-08 12:33:15 -06:00
546e7acb99
stm32:Serial DMA buffer round off not up
2017-05-08 15:54:03 +00:00
b8ef079951
stm32:stm32_serial Forgot the -1 on mask
2017-05-08 03:43:36 +00:00
0b2fb5a396
Merged in david_s5/nuttx/upstream_stm_dma (pull request #355 )
...
stm32: serial Allow configuring Rx DMA buffer size
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-05-06 17:49:48 +00:00
b62ef579c8
stm32: serial Allow configuring Rx DMA buffer size
2017-05-06 05:16:21 -10:00
5d6da5f4bb
kinetis:Add ARCH_HAVE_I2CRESET
2017-05-06 04:52:48 -10:00
97260321f2
kinetis:k66 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:32 -10:00
ce98cedb17
kinetis:k64 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:24 -10:00
af1f48c1c5
kinetis:k60 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:14 -10:00
1d9d13c426
kinetis:k40 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:09 -10:00
979e671cf0
kinetis:k20 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:00 -10:00
1cd3b3f590
Fix errors introduced into Kinetis serial when I unsuccessfully tried to correct coding standard violations. Folks, things will be better for everyone if you just follow that standard.
2017-05-05 14:47:11 -06:00
0e49db7626
Add a blank line.
2017-05-05 09:35:47 -06:00
35883ff9ae
Merged in juniskane/nuttx_stm32l4/l4dev (pull request #347 )
...
STM32L4: add support for many new MCUs from STM32L4X3XX product line and Nucleo-L452 board
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-05-05 15:31:07 +00:00
f29981e473
kinetis:Added HW flow control and termios
2017-05-05 07:33:15 -06:00
b6a8db1b39
Kinetis: Use optional BOARD_OSC_CR and BOARD_OSC_DIV in clock configuration
2017-05-05 07:18:39 -06:00
29ef635e89
Kinetis:Add OSC_DIV to the kinetis_osc header
2017-05-05 07:16:11 -06:00
f73e2aab8d
Kinetis:Fixed CLKSRC Bit Names
2017-05-05 07:14:00 -06:00
2171523f50
Kinetis:Add TPM to K66 chip
2017-05-05 07:12:52 -06:00
71accfc57b
STM32L4: add more chips to Kconfig
...
(This also removes DPFPU/DTCM/ITCM features again, fixing a
recent git history hickup.)
2017-05-05 11:03:49 +03:00
a5e9724224
STM32L4: firewall for stm32l4x3xx
...
Not tested for any product family, but now it at least compiles.
L496 devices can have one bit wider Volatile Data Segment.
2017-05-05 10:15:09 +03:00
075a8b913c
STM32L4: separate SYSCFG into product line specific files for clarity
2017-05-05 10:10:37 +03:00
92f4277b1e
Merged in juniskane/nuttx_stm32l4/stm32l4_i2c_pr (pull request #346 )
...
STM32L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-05-04 19:29:08 +00:00
7035723aeb
STM32F7 serial: Allow configuring Rx DMA buffer size
2017-05-04 07:09:19 -06:00
acf0d17e5a
Fix STM32F7 I2C interrupt handler
2017-05-04 06:51:44 -06:00
80c2d384bb
STM32L4: flash: update override config macros and add FLASH_CONFIG_B
2017-05-04 15:24:16 +03:00
ae22eb224a
STM32L4: changes needed for STM32L452 and Nucleo-L452RE board
...
GPIO and UART seem similar across STMicro product matrix,
so renamed files accordingly. RCC is cloned just in case,
while conflicting differences there seem to be very minor.
2017-05-04 15:23:38 +03:00
dd1b9dfa81
STM32L4: modularize Kconfig to support different product lines/families
...
This is modeled after STM32F7. Idea is to declare each chip in Kconfig
but allow for flash size override. Commit adds many STM32L4_HAVE_XXX
feature test macros.
2017-05-04 15:22:51 +03:00
c67c4a75ba
STM32L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED
2017-05-04 09:31:12 +03:00
b0e880b04c
Revert "STM32 I2C: More backward tests of CONFIG_I2C_POLLED. Needs to be reviewed."
...
This reverts commit 1e054a2d3b
2017-05-03 18:26:24 -06:00
Gregory Nutt
Gwenhael Goavec-Merou
David Sidrane
Alan Carvalho de Assis
Juha Niskanen
Sebastien Lorquet
Jussi Kivilinna