2ae737f906
Update ChangeLog
2015-02-08 06:58:23 -06:00
3465cb6138
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
2015-02-08 06:53:24 -06:00
252802d1cd
Remove inclusion of some un-necessary header files.
2015-02-06 08:50:53 -06:00
3e6705b526
IPv6: Separate function that converts prefix lengths to a netmask
2015-02-06 08:11:09 -06:00
10cf7e9634
Make some conditional compilation consistent
2015-02-05 14:26:11 -06:00
c7f71c99a5
Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled
2015-02-05 11:47:56 -06:00
6f3f43d930
IPv6: Add a netmaks for the local link address
2015-02-05 05:43:57 -06:00
24d800398e
Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address
2015-02-04 14:51:20 -06:00
1c05245963
STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2015-02-04 06:49:05 -06:00
66f0198e3f
Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete
2015-02-03 13:25:28 -06:00
0e23712db4
Add an ioctal() that can be used to perform ICMPv6 auto-configuration
2015-02-03 08:54:42 -06:00
1d534ff896
Convert the 64-bit usec limit to a 32-bit tick limit
2015-02-03 07:18:17 -06:00
a448e0f69f
On my platform I have just 16-bit timer clocked at 32kHz. As result oneshot timer max delay is 2s. The patch adds limit of maximum ticks in sched_timer_start (nuttx/sched/sched/sched_timerexpiration.c). From Macs N.
2015-02-03 06:25:19 -06:00
2407008b6e
drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters.
2015-02-01 07:24:16 -06:00
a6f1dfa5b0
Remove execute privileges from some header files
2015-02-01 06:24:18 -06:00
eb1aca3e46
Add an unlink method to block driver interface. Same motivataion as for the same modification to the character driver interface
2015-01-31 13:19:23 -06:00
62e588a0a4
VFS: Add an unlink method to the character driver interface. This is important because if the character driver inode is unlinked and there are no open references to the driver, then the driver resources will be stranded. On the unlink call, the driver has the opportunity (1) check if there an any open references, and (2) if not free the driver resources
2015-01-31 11:31:34 -06:00
e86d00913e
Unix domain/FIFOs: Fix a race condition between FIFO buffer operations and the opening and closing of FIFOs which necessary when the FIFOs are used to support Unix domain, datagram sockets. The default policy is the deallocate FIFO buffering when the last client closes the pipe. When when used for datagram communicatinos, packets left in the FIFO will be lost. Some like UDP read-ahead is needed: The buffered data in the FIFO needs to be retained until the reader gets a chance to re-open the FIFO. Added an ioctl (PIPEIOC_POLICY) to control the buffer policy. Default (0) is the legacy behavior; Unix domain datagram logic sets the alternative policy so that the packet data persists after the FIFO is closed.
2015-01-30 11:14:24 -06:00
5f9837dcc8
Merge remote-tracking branch 'origin/master' into afunix
...
Conflicts:
nuttx/ChangeLog
2015-01-27 21:47:12 -06:00
c4bd6f52b5
Networking: The are issues with the TCP write-ahead buffering if CONFIG_NET_NOINTS is enabled: There is a possibility of deadlocks in certain timing conditions. I have not seen this with the Tiva driver that I have been users but other people claim to see the issue on other platforms. Certainly it is a logic error: The network should never wait for TCP read-ahead buffering space to be available. It should drop the packets immediately.
...
This was fixed by duplicating most of the IOB interfaces: The versions that waited are still present (like iob_alloc()), but now there are non-waiting verisons of the same interfaces (like iob_tryalloc()). The TCP read-ahead logic now uses only these non-waiting interfaces.
2015-01-27 21:23:42 -06:00
cbf0608513
Various fixes to get Unix domain sockets to build on the simulator without Ethernet
2015-01-27 14:11:46 -06:00
6418f08459
Add math library defines for nan functions. From Brennan Ashton.
2015-01-26 19:03:38 -06:00
b12cf6d2f5
Add math library support for trunc functions. From Brennan Ashton.
2015-01-26 19:00:35 -06:00
06337a4f7a
Add math library support for copysign. From Brennan Ashton
2015-01-26 18:52:28 -06:00
7e177e1c12
Add error function to math library. From Brennan Ashton.
2015-01-26 13:58:47 -06:00
36d5c00ec6
Add math library definition for isfinite. From Brennan Ashton.
2015-01-26 13:55:49 -06:00
e153959eea
Add support for inverse hyperbolic functions. From Brennan Ashton
2015-01-26 13:52:53 -06:00
d7189558a6
Add ioctls for Unix domain sockets
2015-01-24 11:57:06 -06:00
bf61008448
Add sys/un.h header file
2015-01-24 11:44:06 -06:00
d84abfafc4
Fix another error in conditional compilation; plus some additional cosmetic changes
2015-01-24 09:04:28 -06:00
f4bb7f14e1
Networking: Clean up network status collection and presentation for IPv6
2015-01-24 08:26:12 -06:00
96a53254dd
Some minor clean-up of IPv4/6 flags
2015-01-24 07:29:43 -06:00
7e46e94546
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
05c5c8c337
Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane
2015-01-24 06:03:39 -06:00
dc759d31d9
Math library: Adds support for the expm1 functions: http://pubs.opengroup.org/onlinepubs/009695399/functions/expm1.html . From Brennan Ashton
2015-01-23 17:15:42 -06:00
30f0a942e1
Networking: First cut at ICMPv6 ping logic
2015-01-23 14:06:08 -06:00
9f40a13cfa
Correct the MSS calculation
2015-01-22 12:30:07 -06:00
6175e9eec5
Networking: Correct the value returned by accept() in the case where net_lockingwait() is called. It was returning -1 and losing the errno value. Noted by Rony Xln
2015-01-22 06:51:31 -06:00
38e0dcf097
Networking: Fix another error in an IPv6 macro. Again ampersand where there should not be one
2015-01-21 14:11:20 -06:00
8132afb3de
Fix some errors in memcpy arguments. No ampersands on array arguments.
2015-01-21 12:42:22 -06:00
5d31687e75
Correct name of fields in struct sockaddr_in6: sin6_port and sin6_family, not sin_port and sin_family
2015-01-20 18:14:09 -06:00
67a655ecf0
Networking: Add logic to search the Neighbor Table and update the destination address in the output Ethernet header OR to send an ICMPv6 Neighbor Solicitation if there is no entry in the Neighbor table for the IPv6 address
2015-01-20 14:37:02 -06:00
d68cd0d8de
Networking: Update ICMPv6 logic to RFCs
2015-01-20 11:06:51 -06:00
2fd334432c
Networking: Fix to ICMPv6 logic: Needs to set source and destination address in the Ethernet header
2015-01-19 14:57:55 -06:00
13149536f2
Networking: Update ICMPv6 message numbers
2015-01-19 14:04:16 -06:00
59c0757183
Fix a few more dangling IPv6 issues found by code inspection
2015-01-18 10:33:27 -06:00
f7663ef0ab
Networking: Final detangle off IPv4 and IPv6 TCP/UDP send logic. The Networking subsystem now compiles with IPv6 enabled
2015-01-18 08:56:05 -06:00
86f617cc88
Networking: Straighten up use if IPv6/IPv4 in TCP connection logic
2015-01-17 17:07:54 -06:00
94f9312150
Networking: Save the IP domain in the connection structure
2015-01-17 13:07:48 -06:00
2c251d845c
include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received.
...
net/socket, net/tcp, net/udp: Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet. This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
2015-01-17 07:42:09 -06:00
Gregory Nutt