07d232b84a
STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6.
2015-02-05 11:21:04 -06:00
45cadc9e0b
Fix an error in IPv6 netmask caused by a bad range in the Kconfig file
2015-02-05 10:50:25 -06:00
17366dcbb1
Refresh configuration
2015-02-05 10:07:31 -06:00
8a5d6fc78e
Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete
2015-02-03 13:25:28 -06:00
573ffe4221
Restore 20Msec default
2015-02-02 14:59:49 -06:00
8592ce93af
Auto neighbor solicitation is no longer EXPERIMENTAL and is the default for the DK-TM4C129X/ipv6 configuration
2015-02-02 14:09:06 -06:00
a2a2f2d003
ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation).
2015-02-02 13:44:31 -06:00
f3ed2e36ec
Cosmetic update to a few comments
2015-02-01 12:23:57 -06:00
962cec440d
Refresh some configurations
2015-02-01 12:15:46 -06:00
6867a78bce
Fix compile issues with configs/sim/nettest
2015-02-01 12:00:30 -06:00
a74435385f
Obviously can't use LOWCONSOLE with nsh.
2015-02-01 09:21:51 -06:00
7e0bf3da9d
drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters.
2015-02-01 07:24:16 -06:00
533707f5f4
Moteino Mego: Move linker scripts to scripts/ directory as with other configurations
2015-02-01 06:44:26 -06:00
723e0e2ecb
Moteino Mega: Rename files to conform to newer standards. Need to fix all of the old configurations someday
2015-01-31 14:15:13 -06:00
2720144586
Review/modifications for change of last merge
2015-01-31 14:10:53 -06:00
8944a041fd
Merge commit '1207647ee19ac48746300f2d3fa8f4679c32de95'
2015-01-31 13:47:10 -06:00
ca7ecf658f
Update README for MoteinoMEGA (ATMEGA1284P) port.
2015-01-31 13:32:31 -06:00
cd2be452ee
Complete initial port.
2015-01-31 11:59:39 -06:00
00a561126d
Unix domain: Add options to build in stream or datagram support separately
2015-01-31 07:58:51 -06:00
94d18aedf4
apps/ustream and udgram: Change default FIFO path to /dev/fifo
2015-01-30 09:07:22 -06:00
290e7465c3
Update configuration
2015-01-29 16:30:43 -06:00
626d2257b8
Update ChangeLog
2015-01-29 11:48:46 -06:00
ce67047a79
update configuration
2015-01-29 09:33:24 -06:00
bfa58153ec
Minor fixes after initial tests with apps/examples/udgram
2015-01-28 15:27:54 -06:00
02dce5b0fe
net/socket/accept.c: Ooops.. deleted one too many header files
2015-01-28 14:56:06 -06:00
d0e00041e6
Unix domain socket support is no longer EXPERIMENTAL
2015-01-28 13:22:53 -06:00
1fdc10298e
Refresh configurations
2015-01-28 12:47:03 -06:00
3bc8bf4a38
sim/ustream: Add a configuration for testing Unix domain sockets with the simulator
2015-01-28 09:09:27 -06:00
df36a6243c
Try console on serial 1.
2015-01-26 14:33:25 -06:00
4f5386bbb2
Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth
2015-01-26 07:33:22 -06:00
2103ca967a
First step at porting to MoteinoMEGA. LED shows assert failure at boot. Appears to be short double blink, short off (~1sec), followed by 250ms toggle cycles. Most of it derived from amber board.
2015-01-24 14:31:35 -06:00
fec9e724d7
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
45923970e2
Update README
2015-01-23 16:55:39 -06:00
df9d103360
configs/dk-tm4c129x/ipv6: Add an IPv6-enabled NSH configruation
2015-01-23 11:45:50 -06:00
84102addf0
Cosmetic changes to comments; refresh configuration
2015-01-22 14:46:36 -06:00
ca31cf4608
Refresh configuration/update some misnamed conditional compilation
2015-01-18 11:17:00 -06:00
de923ae391
Missing # in #if in previous commit
2015-01-17 17:13:04 -06:00
3a0812508b
Spark: Certain combinations of conditional compilation results in compilation errors
2015-01-17 14:19:25 -06:00
764b5075bc
Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future
2015-01-14 10:51:09 -06:00
6e51304d4b
Remove the px4-v2_upstream configuration. Moved to misc/Obsoleted/configs.
...
This is not the official configuration for the PX4 board and has led to confusion by NuttX users. The board configuration also requires some ongoing maintenance and customization to support ongoing PX4 testing and evaluation. It is best retained the PX4 repositories where it can be properly maintained and not in the upstream NuttX repository.
2015-01-14 09:54:51 -06:00
f374e5fde4
Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts.
...
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer). Also, do not unconditional enable the timer out interrupt. The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
2015-01-14 07:33:59 -06:00
ef409169fa
Update README
2015-01-13 16:17:07 -06:00
1f24e7e155
Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress.
2015-01-13 11:49:00 -06:00
c2a47142e8
DK-TM3C129X Timer: Add timer initialization logic to the board bring-up
2015-01-13 11:10:35 -06:00
f482e6e3db
TM4C123G LaunchPad: Button support from Bradlye Noyes
2015-01-12 21:14:01 -06:00
427e5c98c5
Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module
2015-01-09 14:10:31 -06:00
80c7fa20b9
Update README
2015-01-07 06:23:24 -06:00
57202946a8
DK-TM42129X: Support for the TMP100 temperature sensor is enabled by default in the NSH configuration
2015-01-06 13:23:35 -06:00
4d7efb5865
DK-TM4C129X: Add logic to initialize the TMP-100 temperature sensor driver at startup
2015-01-06 13:23:02 -06:00
524ccad0ba
DK-TM4C129X: Add support for on-board TMP100 temperature sensor
2015-01-06 11:50:56 -06:00
Gregory Nutt
jeditekunum