0b52e6f571
Font cache: Replace fixed-size array with variable size link list.
2017-01-06 09:07:25 -06:00
dc05af6436
Graphics: Initial separation of font cache from graphics/nxterm. Now in libnx/nxfronts
2017-01-05 18:36:29 -06:00
d91cf5736e
With last changes the Tom Thumb 3x5 font is now 4x6
2017-01-04 10:31:53 -06:00
6c826bb209
Add support for Tom Thumb small mono-space font
2017-01-03 11:11:47 -06:00
cfb876263a
SMP: There were certain conditions that we must avoid by preventing releasing the pending tasks while withn a critical section. But this logic was incomplete; there was no logic to prevent other CPUs from adding new, running tasks while on CPU is in a critical section.
...
This commit corrects this. This is matching logic in sched_addreadytorun to avoid starting new tasks within the critical section (unless the CPU is the holder of the lock). The holder of the IRQ lock must be permitted to do whatever it needs to do.
2016-12-27 08:49:07 -06:00
b0fcf3abd7
termios.h: Fix CRTSCTS define to include input and output flow
2016-12-26 07:41:44 -06:00
9e8b1f32d2
sched note: record ID enumeration now results on constant values; ID values do not change with configuration. This makes writing post-processing software much easier
2016-12-24 15:44:21 -06:00
81697f2285
Xtensa ESP32: Fix APP CPU startup... Can't use semaphores on the IDLE thread.
2016-12-20 11:26:37 -06:00
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
c83da3c48f
Remove minnsh configurations and support logic: up_getc() and lowinstream.
...
This was an interesting exercise to see just how small you could get NuttX, but otherwise it was not useful: (1) the NSH code violated the OS interface layer by callup up_getc and up_putc directly, and (2) while waiting for character input, NSH would call up_getc() which would hog all of the CPU. NOt a reasonably solution other than as a proof of concept.
2016-12-13 18:01:23 -06:00
d648f9c8b4
Add task_testcancel()
2016-12-10 16:34:14 -06:00
f132960789
Add task_setcanceltype()
2016-12-10 16:06:14 -06:00
5fb207eb36
Add task_setcancelstate()
2016-12-10 15:16:46 -06:00
b52e4e5ecd
Move cancellation point definitions to their own header file.
2016-12-10 09:08:26 -06:00
bc3ca25cc7
Cancellation points: Close up some logic to eliminte some race conditions.
2016-12-10 08:36:58 -06:00
e9d3c3362a
Correct some default font IDs
2016-12-10 07:46:54 -06:00
e62b3bccd3
pthread_setcanceltype() and pthread_testcancel() do not have to be system calls if cancellation points are not enabled.
2016-12-10 07:40:48 -06:00
18ce5496e4
Fix upper- vs. lower-case typo.
2016-12-10 07:15:33 -06:00
1b2135a90a
Add pthread_setcanceltype() and pthread_testcancel() as system calls.
2016-12-10 07:12:11 -06:00
d35e589d56
Flesh basic cancellation point support
2016-12-09 09:44:23 -06:00
82a79b9c1b
Add framework for cancellation point support.
2016-12-09 08:13:28 -06:00
acaae12e8b
Add pthread_testcancel(), pthread_testcancel(), and definitiions for cancellation types.
2016-12-09 07:23:00 -06:00
ab43681f15
Update TODO and some comments.
2016-12-08 10:24:40 -06:00
a1fbc2ad0d
pthreads: Add pthread_cleanup_push() and pthread_cleanup_pop()
2016-12-08 09:27:13 -06:00
a7b688e87b
sched notes: Add additional note to see if/when CPU is started in SMP mode.
2016-12-07 09:08:20 -06:00
35dfe25430
Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.
2016-12-06 08:51:37 -06:00
55dd1c87b3
Remove all references to BOARDIOC_ADCSETUP
2016-12-05 15:31:40 -06:00
b999e63c82
Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more.
2016-12-05 13:54:12 -06:00
a431fc77cb
Add a forward refeence to elininate a warning.
2016-12-03 16:35:37 -06:00
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
41e35c88bf
eZ80 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 10:43:35 -06:00
553f6d22fc
Boardctl: Add a boardctrl() command to start the NX server. Refresh all NX configurations.
2016-12-01 13:52:13 -06:00
6dda185e8a
NX: Remove configuration CONFIG_NX_NXSTART. nx_start.c is now built unconditionally in multi-user mode.
2016-12-01 13:30:24 -06:00
ca2d62f86c
arp.h: Fix some typos introduce in last big set of commits.
2016-11-29 16:57:19 -06:00
c09ae58e3f
include/: Remove all references to CONFIG_NET_MULTIBUFFER. d_buf in struct net_driver_s is now always a pointer vs. an array.
2016-11-29 16:08:36 -06:00
9ee3f3b933
sched_note: Permit spinlock and critical section notes in in-memory buffer iff sched_not_get() interfaces is disabled.
2016-11-28 18:36:26 -06:00
00215fbc98
sched_note: Add spinlock instrumentation; In SMP configurations, select to log only notes from certain CPUs
2016-11-28 10:33:46 -06:00
d65be718c2
sched_note: Extend OS instrumentation to include some SMP events.
2016-11-27 17:14:57 -06:00
e3fe320e08
SMP: Add support for linking spinlocks into a special, non-cached memory region.
2016-11-26 08:47:03 -06:00
7f636f2280
SMP: Add spin_trylock(). Use this in conditions where other CPUs need to stopped but we cannot call enter_critical_section.
2016-11-24 13:33:43 -06:00
bac7153609
SMP: Add logic to avoid a deadlock condition when CPU1 is hung waiting for g_cpu_irqlock and CPU0 is waitin for g_cpu_paused
2016-11-22 11:34:16 -06:00
8eec4ab0e8
Eliminate a warning
2016-11-22 06:58:34 -06:00
558784d06f
Spinlocks: Added capability to provide architecture-specific memory barriers. This was for i.MX6 but does not help with the SMP problems. It is still a good feature.
2016-11-21 11:55:59 -06:00
337d0f1050
Fix a typo in a spinlock macro
2016-11-21 08:27:51 -06:00
e24f281401
This commit adds a new internal interfaces and fixes a problem with three APIs in the SMP configuration. The new internal interface is sched_cpu_pause(tcb). This function will pause a CPU if the task associated with 'tcb' is running on that CPU. This allows a different CPU to modify that OS data stuctures associated with the CPU. When the other CPU is resumed, those modifications can safely take place.
...
The three fixes are to handle cases in the SMP configuration where one CPU does need to make modifications to TCB and data structures on a task that could be running running on another CPU. Those three cases are task_delete(), task_restart(), and execution of signal handles. In all three cases the solutions is basically the same: (1) Call sched_cpu_pause(tcb) to pause the CPU on which the task is running, (2) perform the necessary operations, then (3) call up_cpu_resume() to restart the paused CPU.
2016-11-20 07:57:18 -06:00
6a7619b6f0
Update TODO list
2016-11-19 13:23:15 -06:00
a2aba90252
Update some comments
2016-11-19 11:48:08 -06:00
f40fbaa4b9
sched/task: task_restart() test not supported on SMP systems. This is not fully implemented.
2016-11-19 11:41:05 -06:00
5363d0619a
Fix warnings
2016-11-18 15:26:08 +01:00
197cec58d2
timer driver: Use signal to notify of timer expiration. Add generic argument so that there can be additional usage.
2016-11-17 14:38:21 -06:00
Gregory Nutt
Alan Carvalho de Assis
Lorenz Meier
Pierre-Noel Bouteville
Sebastien Lorquet