Correct build errors when CONFIG_ENABLE_ALL_SIGNALS is not defined
- sched makefiles: Move pending-signal helpers from the ENABLE_ALL_SIGNALS-only
list to the !DISABLE_ALL_SIGNALS list so signal dispatch is available in
PARTIAL builds sched: make SIG_PREALLOC_ACTIONS, SIG_ALLOC_ACTIONS and
SIG_DEFAULT depend on ENABLE_ALL_SIGNALS
- sched: fix ifdefs around pending-signal queue access and signal-mask for
PARTIAL/DISABLE modes
- arch: gate SYS_signal_handler / _return calls and SYSCALL_LOOKUP(signal)
with ENABLE_ALL_SIGNALS
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Add trace points to record transitions of g_nx_initstate and to mark
board early/late initialization boundaries. Also add trace marks for
RESET and PANIC to improve boot-time diagnostics and failure analysis.
Add OSINIT_RESET to indicate system is in reset process.
Signed-off-by: yukangzhi <yukangzhi@xiaomi.com>
Move pthread mutex operations from kernel-space syscall
interface to user-space implementations
to reduce syscall overhead. Relocate mutex holder list
tracking from task control block (tcb) to
thread local storage (tls) to improve memory layout and
cache efficiency. Add helper macros for
conditional mutex implementations and update syscall
interface accordingly.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Change g_nx_initstate type from uint8_t to enum nx_initstate_e.
Avoid enum/integer base-type mismatch in init state comparisons.
Satisfies MISRA C:2012 Rule 10.4 without behavior change.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Signals in NuttX serve two primary purposes:
1. Synchronization and wake-up:
Signals can be used to block threads on specific signal sets and later
wake them up by delivering the corresponding signals to those threads.
2. Asynchronous notification:
Signals can also be used to install callback handlers for specific signals, allowing threads to
asynchronously invoke those handlers when the signals are delivered.
This change introduces the ability to partially disable signal functionality: to disable only signal functions for
Asynchronous notification, keeping functions for Synchronization and wake-up.
This enables finer-grained control over signal usage while preserving existing behavior for supported use cases.
Co-authored-by: Guo Shichao guoshichao@xiaomi.com
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
This reverts commit 29e50ffa73.
reason:
Placing the main thread and the gourd in the same memory block, and allocating and freeing memory simultaneously, presents the following two problems：
When the main thread creates a child thread and performs a detach operation, there is a possibility that the main thread may have exited, but the main thread's TCB (Transaction Control Block) may not have been released.
This could potentially cause the main thread's TCB to be double-freed. The core contradiction in this problem lies in binding the main thread's TCB (Trust Container Registry) and the group together. When releasing the main thread's TCB, an additional check is needed to ensure the main thread was the last to leave the group. If this check and the free operation are atomically guaranteed, the logic is sound, and double freeing won't occur. However, this atomicity cannot be completely guaranteed. If other free operations cause a block, problems still arise.
Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>
The current event implementation relies on a dedicated wait object,
which introduces several issues:
1. Increases memory usage
2. Complicates the event logic
3. Makes the API design less clean, as it requires a separate
nxevent_tickwait_wait() function
This patch removes the event’s dependency on the wait object
and eliminates the nxevent_tickwait_wait() API accordingly.
BREAKING CHANGE: this commit removed the nxevent_tickwait_wait function
so the related docs should be updated accordingly
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
In a flat build, a separate init thread should not be mandatory,
users can create a user task in the board early initialization or late initialization hook.
Since g_assignedtasks only holds the running task for each CPU, it can
be just a vector. Idle tasks are already preserved in statically allocated
structures "g_idletcb", and can be used from there.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
This fixes several places, where the sched erroneously checks if the scheduling
is locked on current cpu/task, when it should check if the scheduling is locked
on the target cpu/task.
The original code randomly caused a task to be added to the pending list, and never
taken out from there, leading to system halt.
For SMP, there is no need for the pending list. Each CPU has got it's own
running list (assigned tasks list), and pending tasks can just be kept in
the unassigned (readytorun) list.
In addition, the smp scheduling is changed in a way that every CPU just picks
up the tasks from the ready-to-run list themselves. Which task to pick is
not tried to be dictated by another CPU.
This also allows using up_send_smp_sched for asynchronously
- re-prioritizing a running task
- triggering round robin scheduling switch
Iow, no separate smp call mechanism is needed for those and the code can be simplified.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Fix build error with the following condition.
- CONFIG_BOARD_CRASHDUMP_CUSTOM=y
- CONFIG_COREDUMP=n
The condition for calling `coredump_initialize()` is incorrect.
CONFIG_BOARD_CRASHDUMP_CUSTOM is not dependent on CONFIG_COREDUMP.
Signed-off-by: SPRESENSE <41312067+SPRESENSE@users.noreply.github.com>
reason:
When entering an exception or interrupt, there are two sets of registers:
one is the "running regs", which we need to save,
and the other is the "ready to running regs", which we may soon use.
For consistency in logic, we can always store the "running regs" in the regs field of g_running_tasks,
otherwise it may lead to errors in the storage location of the "running regs."
When we need to access the "running regs," we should uniformly retrieve them from the regs field of g_running_tasks.
As the next step, we will rename the set_current_regs/up_current_regs functions
for each architecture to more appropriate names, solely for the purpose of identifying interrupts.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
We can utilize percpu storage to hold information about the
current running task. If we intend to implement this feature, we would
need to define two macros that help us manage this percpu information
effectively.
up_this_task: This macro is designed to read the contents of the percpu
register to retrieve information about the current
running task.This allows us to quickly access
task-specific data without having to disable interrupts,
access global variables and obtain the current cpu index.
up_update_task: This macro is responsible for updating the contents of
the percpu register.It is typically called during
initialization or when a context switch occurs to ensure
that the percpu register reflects the information of the
newly running task.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
1 To improve efficiency, we mimic Linux's behavior where preemption disabling is only applicable to the current CPU and does not affect other CPUs.
2 In the future, we will implement "spinlock+sched_lock", and use it extensively. Under such circumstances, if preemption is still globally disabled, it will seriously impact the scheduling efficiency.
3 We have removed g_cpu_lockset and used irqcount in order to eliminate the dependency of schedlock on critical sections in the future, simplify the logic, and further enhance the performance of sched_lock.
4 We set lockcount to 1 in order to lock scheduling on all CPUs during startup, without the need to provide additional functions to disable scheduling on other CPUs.
5 Cpu1~n must wait for cpu0 to enter the idle state before enabling scheduling because it prevents CPUs1~n from competing with cpu0 for the memory manager mutex, which could cause the cpu0 idle task to enter a wait state and trigger an assert.
size nuttx
before:
text data bss dec hex filename
265396 51057 63646 380099 5ccc3 nuttx
after:
text data bss dec hex filename
265184 51057 63642 379883 5cbeb nuttx
size -216
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
Currently, if we need to schedule a task to another CPU, we have to completely halt the other CPU,
manipulate the scheduling linked list, and then resume the operation of that CPU. This process is both time-consuming and unnecessary.
During this process, both the current CPU and the target CPU are inevitably subjected to busyloop.
The improved strategy is to simply send a cross-core interrupt to the target CPU.
The current CPU continues to run while the target CPU responds to the interrupt, eliminating the certainty of a busyloop occurring.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The file descriptors of kernel threads should be clean and should
not be generated based on user threads. Instead, an idle thread
hould be chosen.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Kthreads can share the group data so that to reduce overheads.
This implements shared kthread group via:
- use `tcb_s` instead of `task_tcb_s` for kthreads
- use `g_kthread_group` when creating kthreads
- use stackargs to start tasks and kthreads
see pull/12320 for test logs.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
sched implementation not depends on macro abstraction, so revert below commit:
This reverts commit 4e62d0005a
This reverts commit 0f0c370520
This reverts commit ad0efd04ee
Signed-off-by: chao an <anchao@lixiang.com>
1. add support to join main task
| static pthread_t self;
|
| static void *join_task(void *arg)
| {
| int ret;
| ret = pthread_join(self, NULL); <--- /* Fix Task could not be joined */
| return NULL;
| }
|
| int main(int argc, char *argv[])
| {
| pthread_t thread;
|
| self = pthread_self();
|
| pthread_create(&thread, NULL, join_task, NULL);
| sleep(1);
|
| pthread_exit(NULL);
| return 0;
| }
2. Detach active thread will not alloc for additional join, just update the task flag.
3. Remove the return value waiting lock logic (data_sem),
the return value will be stored in the waiting tcb.
4. Revise the return value of pthread_join(), consistent with linux
e.g:
Joining a detached and canceled thread should return EINVAL, not ESRCH
https://pubs.opengroup.org/onlinepubs/009695399/functions/pthread_join.html
[EINVAL]
The value specified by thread does not refer to a joinable thread.
NOTE:
This PR will not increase stack usage, but struct tcb_s will increase 32 bytes.
Signed-off-by: chao an <anchao@lixiang.com>
move task group into task_tcb_s to avoid access allocator to improve performance
for Task Termination, the time consumption will be reduced ~2us (Tricore TC397 300MHZ):
15.97(us) -> 13.55(us)
Signed-off-by: chao an <anchao@lixiang.com>
The maximum startup parameters have been checked accordingly in nxtask_setup_stackargs(),
let us save argument counter to avoid limit check.
Signed-off-by: chao an <anchao@lixiang.com>
Current `CONFIG_PAGING` refers to an experimental implementation
to enable embedded MCUs with some limited RAM space to execute
large programs from some non-random access media.
On-demand paging should be implemented for the kernel mode with
address environment implementation enabled.
These variables will trigger variable 'ret' set but not used warnings due to different configurations.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Usually the startup script is placed under /etc. The contents of the etc directory
are compiled and linked with Nuttx binary in the form of romfs. After startup,
it will be mounted by Nsh.
etc is generated by the different boards, that use genromfs and xxd tools to generate
and compile it into the Nuttx, for example: boards/arm/at32/at32f437-mini/tool/mkromfs.sh
The more common method is etc image generated from the content in the corresponding
board/arch/board/board/src/etc directory, and added by Makefile for example:
boards/sim/sim/sim/src/etc.
But in kernel/protected mode, Nuttx kernel and apps are run in different privileged/
non-privileged mode or the isolated binarys, so as that nsh should use syscall to
access Nuttx kernel by exported API. In this scenario, nsh can not mount the etc image
content, because that is generated in board and as a part of Nuttx kernel.
changes:
- move etc romfs mount from nsh to Nuttx, but keep the script to parse and execute.
- move and rename the related CONFIG, move customized nsh_romfsimg.h to etc_romfs.c
in boards, and no need declaration for romfs_img/romfs_img_len.
This commit changes and updates all configurations in Nuttx arch/board as much as possible,
but if any missing, please refer to the following simple guide:
- rename CONFIG_NSH_ROMFSETC to CONFIG_ETC_ROMFS, and delete CONFIG_NSH_ARCHROMFS in defconfig
- rename the etc romfs mount configs, for example CONFIG_NSH_FATDEVNO to CONFIG_ETC_FATDEVNO
- move customized nsh_romfsimg.h to etc_romfs.c in board/arch/board/board/src and no need
declaration for romfs_img/romfs_img_len.
- delete default nsh_romfsimg.h, if ROMFSETC is enabled, should generate and compile etc_romfs.c
in board/arch/board/board/src.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Usage:
1. CONFIG_FS_PROCFS_MAX_STACK_RECORD > 0, such as 32,
2. add '-finstrument-functions' to CFLAGS for What you want to check
stack.
3. mount porcfs
4. cat /proc/<pid>/stack will print backtace & size
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
The task files should consult the "spawn action" and "O_CLOEXEC flags"
to determine further whether the file should be duplicated.
This PR will further optimize file list duplicating to avoid the performance
regression caused by additional file operations.
Signed-off-by: chao an <anchao@xiaomi.com>
Jukka Laitinen
Piyush Patle
yukangzhi
hujun5
fangxinyong
wangchengdongandGuo Shichao guoshichao@xiaomi.com
anjiahao
wangzhi16
chao an
SPRESENSE
buxiasen
chenzhijia
dongjiuzhu1
ligd
dulibo1
Alin Jerpelea
Yanfeng Liu
xuxingliang
chao an
Tiago Medicci Serrano
Masayuki Ishikawa
yinshengkai
chao an