diff --git a/arch/z16/src/z16f/chip.h b/arch/z16/src/z16f/chip.h
index b395c6e3b5c..3c68677fb96 100644
--- a/arch/z16/src/z16f/chip.h
+++ b/arch/z16/src/z16f/chip.h
@@ -652,12 +652,13 @@ extern "C"
 #define EXTERN extern
 #endif
 
-/* The following two routines are called from the low-level reset logic.  z16f_lowinit()
- * must be provided by the board-specific logic; z16f_lowuartinit() is called only if
- * debugging support for up_lowputc (or getc) is enabled.
+/* The following two routines are called from the low-level reset logic.
+ * z16f_board_initialize() must be provided by the board-specific logic;
+ * z16f_lowuartinit() is called only if debugging support for up_lowputc (or getc)
+ * is enabled.
  */
 
-void z16f_lowinit(void);
+void z16f_board_initialize(void);
 #if defined(CONFIG_Z16_LOWPUTC) || defined(CONFIG_Z16_LOWGETC)
 void z16f_lowuartinit(void);
 #endif
diff --git a/arch/z16/src/z16f/z16f_head.S b/arch/z16/src/z16f/z16f_head.S
index dbf631706a5..519f8a40e87 100644
--- a/arch/z16/src/z16f/z16f_head.S
+++ b/arch/z16/src/z16f/z16f_head.S
@@ -52,7 +52,7 @@
  **************************************************************************/
 
 	xref	_z16f_clkinit:EROM
-	xref	_z16f_lowinit:EROM
+	xref	_z16f_board_initialize:EROM
 #ifdef CONFIG_ARCH_LEDS
 	xref	_board_autoled_initialize:EROM
 #endif
@@ -84,43 +84,43 @@
  * Flash Option Byte Setup
  **************************************************************************/
 
-	define FOPTIONSEG, SPACE=ROM, ORG=0
-	segment FOPTIONSEG
-	db BOARD_FLOPTION0
-	db BOARD_FLOPTION1
-	db BOARD_FLOPTION2
-	db BOARD_FLOPTION3
+	define	FOPTIONSEG, SPACE=ROM, ORG=0
+	segment	FOPTIONSEG
+	db		BOARD_FLOPTION0
+	db		BOARD_FLOPTION1
+	db		BOARD_FLOPTION2
+	db		BOARD_FLOPTION3
 
 /**************************************************************************
  * vectors
  **************************************************************************/
 
-	vector RESET=_z16f_reset
-	vector SYSEXC=_sysexc_isr
-	vector TIMER2=_timer2_isr
-	vector TIMER1=_timer1_isr
-	vector TIMER0=_timer0_isr
-	vector UART0_RX=_uart0rx_isr
-	vector UART0_TX=_uart0tx_isr
-	vector I2C=_i2c_isr
-	vector SPI=_spi_isr
-	vector ADC=_adc_isr
-	vector P7AD=_p7ad_isr
-	vector P6AD=_p6ad_isr
-	vector P5AD=_p5ad_isr
-	vector P4AD=_p4ad_isr
-	vector P3AD=_p3ad_isr
-	vector P2AD=_p2ad_isr
-	vector P1AD=_p1ad_isr
-	vector P0AD=_p0ad_isr
-	vector PWM_TIMER=_pwmtimer_isr
-	vector UART1_RX=_uart1rx_isr
-	vector UART1_TX=_uart1tx_isr
-	vector PWM_FAULT=_pwmfault_isr
-	vector C3=_c3_isr
-	vector C2=_c3_isr
-	vector C1=_c2_isr
-	vector C0=_c0_isr
+	vector	RESET=_z16f_reset
+	vector	SYSEXC=_sysexc_isr
+	vector	TIMER2=_timer2_isr
+	vector	TIMER1=_timer1_isr
+	vector	TIMER0=_timer0_isr
+	vector	UART0_RX=_uart0rx_isr
+	vector	UART0_TX=_uart0tx_isr
+	vector	I2C=_i2c_isr
+	vector	SPI=_spi_isr
+	vector	ADC=_adc_isr
+	vector	P7AD=_p7ad_isr
+	vector	P6AD=_p6ad_isr
+	vector	P5AD=_p5ad_isr
+	vector	P4AD=_p4ad_isr
+	vector	P3AD=_p3ad_isr
+	vector	P2AD=_p2ad_isr
+	vector	P1AD=_p1ad_isr
+	vector	P0AD=_p0ad_isr
+	vector	PWM_TIMER=_pwmtimer_isr
+	vector	UART1_RX=_uart1rx_isr
+	vector	UART1_TX=_uart1tx_isr
+	vector	PWM_FAULT=_pwmfault_isr
+	vector	C3=_c3_isr
+	vector	C2=_c3_isr
+	vector	C1=_c2_isr
+	vector	C0=_c0_isr
 
 /**************************************************************************
  * Equates
@@ -134,8 +134,8 @@
  * Code
  **************************************************************************/
 
-	define CODESEG, SPACE=EROM
-	segment CODESEG
+	define	CODESEG, SPACE=EROM
+	segment	CODESEG
 
 /**************************************************************************
  * Name: _z16f_reset
@@ -213,7 +213,7 @@ _z16f_reset8:
 
 	/* Perform low-level hardware initialization */
 
-	call	_z16f_lowinit			/* Perform low-level hardware initialization */
+	call	_z16f_board_initialize	/* Perform low-level hardware initialization */
 
 #ifdef USE_EARLYSERIALINIT
 	/* Perform early serial initialization */
diff --git a/arch/z16/src/z16f/z16f_serial.c b/arch/z16/src/z16f/z16f_serial.c
index c05ac306a18..f2f3e6d3efa 100644
--- a/arch/z16/src/z16f/z16f_serial.c
+++ b/arch/z16/src/z16f/z16f_serial.c
@@ -704,7 +704,7 @@ void up_earlyserialinit(void)
   uint8_t regval;
 
   /* Configure UART alternate pin functions.  This may duplicate logic in
-   * z16f_lowuartinit() or z16f_lowinit().
+   * z16f_lowuartinit() or z16f_board_initialize().
    */
 
 #ifdef CONFIG_Z16F_UART0
diff --git a/arch/z80/src/ez80/ez80_startup.asm b/arch/z80/src/ez80/ez80_startup.asm
index 8f8da39f779..af1505c4131 100644
--- a/arch/z80/src/ez80/ez80_startup.asm
+++ b/arch/z80/src/ez80/ez80_startup.asm
@@ -49,13 +49,13 @@
 	xref	_ez80_init
 	xref	_ez80_initvectors
 	xref	_ez80_initsysclk
-	xref	_ez80_lowinit
-	xref	__low_bss	; Low address of bss segment
-	xref	__len_bss	; Length of bss segment
+	xref	_ez80_board_initialize
+	xref	__low_bss				; Low address of bss segment
+	xref	__len_bss				; Length of bss segment
 
-	xref	__low_data	; Address of initialized data section
-	xref	__low_romdata	; Addr of initialized data section in ROM
-	xref	__len_data	; Length of initialized data section
+	xref	__low_data				; Address of initialized data section
+	xref	__low_romdata			; Addr of initialized data section in ROM
+	xref	__len_data				; Length of initialized data section
 
 	xref	__copy_code_to_ram
 	xref	__len_code
@@ -80,7 +80,7 @@ _ez80_startup:
 	; Set up the stack pointer at the location determined the lincmd
 	; file
 
-	ld	sp, __stack
+	ld		sp, __stack
 
 	; Peform chip-specific initialization
 
@@ -97,59 +97,60 @@ _ez80_startup:
 	; Perform C initializations
 	; Clear the uninitialized data section
 
-	ld	bc, __len_bss		; Check for non-zero length
-	ld	a, __len_bss >> 16
-	or	a, c
-	or	a, b
-	jr	z, _ez80_bssdone	; BSS is zero-length ...
-	xor	a, a
-	ld	(__low_bss), a
-	sbc	hl, hl			; hl = 0
-	dec	bc			; 1st byte's taken care of
-	sbc	hl, bc
-	jr	z, _ez80_bssdone	; Just 1 byte ...
-	ld	hl, __low_bss		; reset hl
-	ld	de, __low_bss + 1	; [de] = bss + 1
+	ld		bc, __len_bss		; Check for non-zero length
+	ld		a, __len_bss >> 16
+	or		a, c
+	or		a, b
+	jr		z, _ez80_bssdone	; BSS is zero-length ...
+	xor		a, a
+	ld		(__low_bss), a
+	sbc		hl, hl				; hl = 0
+	dec		bc					; 1st byte's taken care of
+	sbc		hl, bc
+	jr		z, _ez80_bssdone	; Just 1 byte ...
+	ld		hl, __low_bss		; reset hl
+	ld		de, __low_bss + 1	; [de] = bss + 1
 	ldir
 _ez80_bssdone:
 
 	; Copy the initialized data section
-	ld	bc, __len_data		; [bc] = data length
-	ld	a, __len_data >> 16	; Check for non-zero length
-	or	a, c
-	or	a, b
-	jr	z, _ez80_datadone	; __len_data is zero-length ...
-	ld	hl, __low_romdata	; [hl] = data_copy
-	ld	de, __low_data		; [de] = data
+
+	ld		bc, __len_data		; [bc] = data length
+	ld		a, __len_data >> 16	; Check for non-zero length
+	or		a, c
+	or		a, b
+	jr		z, _ez80_datadone	; __len_data is zero-length ...
+	ld		hl, __low_romdata	; [hl] = data_copy
+	ld		de, __low_data		; [de] = data
 	ldir				; Copy the data section
 _ez80_datadone:
 
 	; Copy CODE (which may be in FLASH) to RAM if the
 	; copy_code_to_ram symbol is set in the link control file
-	ld	a, __copy_code_to_ram
-	or	a, a
-	jr	z, _ez80_codedone
-	ld	bc, __len_code		; [bc] = code length
-	ld	a, __len_code >> 16	; Check for non-zero length
-	or	a, c
-	or	a, b
-	jr	z, _ez80_codedone	; __len_code is zero-length
-	ld	hl, __low_romcode	; [hl] = code_copy
-	ld	de, __low_code		; [de] = code
-	ldir				; Copy the code section
+
+	ld		a, __copy_code_to_ram
+	or		a, a
+	jr		z, _ez80_codedone
+	ld		bc, __len_code		; [bc] = code length
+	ld		a, __len_code >> 16	; Check for non-zero length
+	or		a, c
+	or		a, b
+	jr		z, _ez80_codedone	; __len_code is zero-length
+	ld		hl, __low_romcode	; [hl] = code_copy
+	ld		de, __low_code		; [de] = code
+	ldir						; Copy the code section
 _ez80_codedone:
 
-	; Perform board-specific initializeation
+	; Perform board-specific initialization
 
-	call	_ez80_lowinit
+	call	_ez80_board_initialize
 
 	; Then start NuttX
 
-	call	_nx_start		; jump to the OS entry point
+	call	_nx_start			; jump to the OS entry point
 
 	; NuttX will never return, but just in case...
 
 _ez80_halt:
-	halt				; We should never get here
-	jp	_ez80_halt
-
+	halt						; We should never get here
+	jp		_ez80_halt
diff --git a/arch/z80/src/z8/z8_head.S b/arch/z80/src/z8/z8_head.S
index 967ba073184..d629cac1669 100644
--- a/arch/z80/src/z8/z8_head.S
+++ b/arch/z80/src/z8/z8_head.S
@@ -66,7 +66,7 @@
  **************************************************************************/
 
 	xref	_z16f_clkinit:ROM
-	xref	_z16f_lowinit:ROM
+	xref	_z16f_board_initialize:ROM
 #ifdef CONFIG_ARCH_LEDS
 	xref	_board_autoled_initialize:ROM
 #endif
@@ -118,119 +118,119 @@
 _z8_reset:
 	/* Set the register pointer for working registers e0-ef */
 
-	srp     #%e0
+	srp		#%e0
 
 	/* Initialize the stack pointer */
 
-	ldx     spl, #low(_far_stacktop+1)
-	ldx     sph, #high(_far_stacktop+1)
+	ldx		spl, #low(_far_stacktop+1)
+	ldx		sph, #high(_far_stacktop+1)
 
 	/* Clear internal register ram area (c_nearbss) */
 
-	ld	r0, #_low_nearbss
-	ld	r2, #_len_nearbss
-	cp	r2, #0
-	jr	z, _z8_reset2
+	ld		r0, #_low_nearbss
+	ld		r2, #_len_nearbss
+	cp		r2, #0
+	jr		z, _z8_reset2
 
 _z8_reset1:
-	clr	@r0
-	inc	r0
+	clr		@r0
+	inc		r0
 	djnz	r2, _z8_reset1
 
 	/* Clear extended ram area (c_farbss) */
 
 _z8_reset2:
-	ld	r2, #high(_low_farbss)
-	ld	r3, #low(_low_farbss)
-	ld	r0, #high(_len_farbss)
-	ld	r1, #low(_len_farbss)
+	ld		r2, #high(_low_farbss)
+	ld		r3, #low(_low_farbss)
+	ld		r0, #high(_len_farbss)
+	ld		r1, #low(_len_farbss)
 
-	ld	r4, r0
-	or	r4, r1
-	jr	z, _z8_reset4
-	clr	r4
+	ld		r4, r0
+	or		r4, r1
+	jr		z, _z8_reset4
+	clr		r4
 
 _z8_reset3:
-	ldx     @rr2,r4
+	ldx		@rr2,r4
 	incw	rr2
 	decw	rr0
-	jr	nz, _z8_reset3
+	jr		nz, _z8_reset3
 
 	/* Copy ROM data into internal RAM */
 
 _z8_reset4:
 #ifdef CONFIG_Z8_COPYNEARDATA
-	ld	r0, #high(_low_near_romdata)
-	ld	r1, #low(_low_near_romdata)
-	ld	r3, #_len_neardata
-	ld	r4, #_low_neardata
-	cp	r3, #0
-	jr	z, _z8_reset6
+	ld		r0, #high(_low_near_romdata)
+	ld		r1, #low(_low_near_romdata)
+	ld		r3, #_len_neardata
+	ld		r4, #_low_neardata
+	cp		r3, #0
+	jr		z, _z8_reset6
 
 _z8_reset5:
 	ldci	@r4, @rr0
-	djnz    r3, _z8_reset5
+	djnz	r3, _z8_reset5
 
 _z8_reset6:
 #endif
 	/* Copy ROM data into extended RAM */
 
-	ld	r0, #high(_low_fardata)
-	ld	r1, #low(_low_fardata)
-	ld	r2, #high(_low_far_romdata)
-	ld	r3, #low(_low_far_romdata)
-	ld	r4, #high(_len_fardata)
-	ld	r5, #low(_len_fardata)
+	ld		r0, #high(_low_fardata)
+	ld		r1, #low(_low_fardata)
+	ld		r2, #high(_low_far_romdata)
+	ld		r3, #low(_low_far_romdata)
+	ld		r4, #high(_len_fardata)
+	ld		r5, #low(_len_fardata)
 
-	ld	r6, r4
-	or	r6, r5
-	jr	z, _z8_reset8
+	ld		r6, r4
+	or		r6, r5
+	jr		z, _z8_reset8
 
 _z8_reset7:
-	ldc	r6, @rr2
-	ldx     @rr0, r6
+	ldc		r6, @rr2
+	ldx		@rr0, r6
 	incw	rr0
 	incw	rr2
 	decw	rr4
-	jr	nz, _z8_reset7
+	jr		nz, _z8_reset7
 
 	/* Copy ROM copy of code into Program RAM */
 
 _z8_reset8:
 #ifdef CONFIG_Z8_COPYPRAM
-	ld	r0, #high(_low_pramseg)
-	ld	r1, #low(_low_pramseg)
-	ld	r2, #high(_low_pram_romdata)
-	ld	r3, #low(_low_pram_romdata)
-	ld	r4, #high(_len_pramseg)
-	ld	r5, #low(_len_pramseg)
+	ld		r0, #high(_low_pramseg)
+	ld		r1, #low(_low_pramseg)
+	ld		r2, #high(_low_pram_romdata)
+	ld		r3, #low(_low_pram_romdata)
+	ld		r4, #high(_len_pramseg)
+	ld		r5, #low(_len_pramseg)
 
-	ld	r6, r4
-	or	r6, r5
-	jr	z, _z8_reset10
+	ld		r6, r4
+	or		r6, r5
+	jr		z, _z8_reset10
 
 _z8_reset9:
-	ldc	r6, @rr2
-	ldc     @rr0, r6
+	ldc		r6, @rr2
+	ldc		@rr0, r6
 	incw	rr0
 	incw	rr2
 	decw	rr4
-	jr	nz, _z8_reset9
+	jr		nz, _z8_reset9
 
 _z8_reset10:
 #endif
 
 	/* Start NuttX */
 
-	ldx     __intrp,#0
-	xor     r15, r15
-	xor     r14, r14
+	ldx		__intrp,#0
+	xor		r15, r15
+	xor		r14, r14
 	call	_nx_start
 
 	/* We should never get here */
 
 _z8_reset_halt:
-	jr	_z8_reset_halt
+	jr		_z8_reset_halt
 
 /**************************************************************************
  * Data
diff --git a/configs/ez80f910200kitg/src/Makefile b/configs/ez80f910200kitg/src/Makefile
index 33b0864cfc6..481946fae10 100644
--- a/configs/ez80f910200kitg/src/Makefile
+++ b/configs/ez80f910200kitg/src/Makefile
@@ -36,6 +36,6 @@
 -include $(TOPDIR)/Make.defs
 
 ASRCS =
-CSRCS = ez80_lowinit.c ez80_leds.c
+CSRCS = ez80_boot.c ez80_leds.c
 
 include $(TOPDIR)/configs/Board.mk
diff --git a/configs/ez80f910200zco/src/ez80_lowinit.c b/configs/ez80f910200kitg/src/ez80_boot.c
similarity index 97%
rename from configs/ez80f910200zco/src/ez80_lowinit.c
rename to configs/ez80f910200kitg/src/ez80_boot.c
index 3dbe7f2fdcb..643eebb93ea 100644
--- a/configs/ez80f910200zco/src/ez80_lowinit.c
+++ b/configs/ez80f910200kitg/src/ez80_boot.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * configs/ez80f910200zco/src/ez80_lowinit.c
+ * configs/ez80f910200kitg/src/ez80_boot.c
  *
  *   Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
@@ -59,7 +59,7 @@ static void ez80_gpioinit(void)
  * Public Functions
  ****************************************************************************/
 
-void ez80_lowinit(void)
+void ez80_board_initialize(void)
 {
   ez80_gpioinit();
 }
diff --git a/configs/ez80f910200zco/src/Makefile b/configs/ez80f910200zco/src/Makefile
index cea55660877..5a4a39e93a0 100644
--- a/configs/ez80f910200zco/src/Makefile
+++ b/configs/ez80f910200zco/src/Makefile
@@ -36,7 +36,7 @@
 -include $(TOPDIR)/Make.defs
 
 ASRCS =
-CSRCS = ez80_lowinit.c
+CSRCS = ez80_boot.c
 ifeq ($(CONFIG_ARCH_LEDS),y)
 CSRCS += ez80_leds.c
 endif
diff --git a/configs/ez80f910200kitg/src/ez80_lowinit.c b/configs/ez80f910200zco/src/ez80_boot.c
similarity index 97%
rename from configs/ez80f910200kitg/src/ez80_lowinit.c
rename to configs/ez80f910200zco/src/ez80_boot.c
index bd2c5a19149..d358fd124a1 100644
--- a/configs/ez80f910200kitg/src/ez80_lowinit.c
+++ b/configs/ez80f910200zco/src/ez80_boot.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * configs/ez80f910200kitg/src/ez80_lowinit.c
+ * configs/ez80f910200zco/src/ez80_boot.c
  *
  *   Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
@@ -59,7 +59,7 @@ static void ez80_gpioinit(void)
  * Public Functions
  ****************************************************************************/
 
-void ez80_lowinit(void)
+void ez80_board_initialize(void)
 {
   ez80_gpioinit();
 }
diff --git a/configs/makerlisp/src/Makefile b/configs/makerlisp/src/Makefile
index 4f9ec287116..a7ba65be604 100644
--- a/configs/makerlisp/src/Makefile
+++ b/configs/makerlisp/src/Makefile
@@ -36,7 +36,7 @@
 -include $(TOPDIR)/Make.defs
 
 ASRCS =
-CSRCS = ez80_lowinit.c ez80_bringup.c
+CSRCS = ez80_boot.c ez80_bringup.c
 
 ifeq ($(CONFIG_LIB_BOARDCTL),y)
 CSRCS += ez80_appinit.c
diff --git a/configs/makerlisp/src/ez80_lowinit.c b/configs/makerlisp/src/ez80_boot.c
similarity index 98%
rename from configs/makerlisp/src/ez80_lowinit.c
rename to configs/makerlisp/src/ez80_boot.c
index 922d2869042..1cc3e721bc6 100644
--- a/configs/makerlisp/src/ez80_lowinit.c
+++ b/configs/makerlisp/src/ez80_boot.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * configs/makerlisp/src/ez80_lowinit.c
+ * configs/makerlisp/src/ez80_boot.c
  *
  *   Copyright (C) 2019 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
@@ -122,7 +122,7 @@ static void ez80_vga_initialize(void)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: ez80_lowinit
+ * Name: ez80_board_initialize
  *
  * Description:
  *   All eZ80 architectures must provide the following entry point.  This
@@ -131,7 +131,7 @@ static void ez80_vga_initialize(void)
  *
  ****************************************************************************/
 
-void ez80_lowinit(void)
+void ez80_board_initialize(void)
 {
   register uint8_t regval;
 
diff --git a/configs/z16f2800100zcog/src/Makefile b/configs/z16f2800100zcog/src/Makefile
index db25fa8f4a1..0720d58094f 100644
--- a/configs/z16f2800100zcog/src/Makefile
+++ b/configs/z16f2800100zcog/src/Makefile
@@ -36,6 +36,6 @@
 -include $(TOPDIR)/Make.defs
 
 ASRCS =
-CSRCS = z16f_lowinit.c z16f_leds.c
+CSRCS = z16f_boot.c z16f_leds.c
 
 include $(TOPDIR)/configs/Board.mk
diff --git a/configs/z16f2800100zcog/src/z16f_lowinit.c b/configs/z16f2800100zcog/src/z16f_boot.c
similarity index 97%
rename from configs/z16f2800100zcog/src/z16f_lowinit.c
rename to configs/z16f2800100zcog/src/z16f_boot.c
index 6c82bb0c54f..44fe82d88b3 100644
--- a/configs/z16f2800100zcog/src/z16f_lowinit.c
+++ b/configs/z16f2800100zcog/src/z16f_boot.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * configs/z16f2800100zcog/src/z16f_lowinit.c
+ * configs/z16f2800100zcog/src/z16f_boot.c
  *
  *   Copyright (C) 2008, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
@@ -88,7 +88,7 @@ static void z16f_gpioinit(void)
  * Public Functions
  ****************************************************************************/
 
-void z16f_lowinit(void)
+void z16f_board_initialize(void)
 {
   z16f_gpioinit();
 }
diff --git a/configs/z16f2800100zcog/src/z16f_leds.c b/configs/z16f2800100zcog/src/z16f_leds.c
index 4c999861246..44f7c1ac71b 100644
--- a/configs/z16f2800100zcog/src/z16f_leds.c
+++ b/configs/z16f2800100zcog/src/z16f_leds.c
@@ -75,7 +75,7 @@
 #ifdef CONFIG_ARCH_LEDS
 void board_autoled_initialize(void)
 {
-  /* The following is performed up_lowinit() as well */
+  /* The following is performed up_board_initialize() as well */
 
   putreg8(getreg8(Z16F_GPIOA_OUT) | 0x07, Z16F_GPIOA_OUT);
   putreg8(getreg8(Z16F_GPIOA_DD) & 0xF8, Z16F_GPIOA_DD);
diff --git a/configs/z8encore000zco/src/Makefile b/configs/z8encore000zco/src/Makefile
index 7696ccc280c..6a5b5ccfa23 100644
--- a/configs/z8encore000zco/src/Makefile
+++ b/configs/z8encore000zco/src/Makefile
@@ -36,6 +36,6 @@
 -include $(TOPDIR)/Make.defs
 
 ASRCS =
-CSRCS = z8_lowinit.c z8_leds.c
+CSRCS = z8_boot.c z8_leds.c
 
 include $(TOPDIR)/configs/Board.mk
diff --git a/configs/z8encore000zco/src/z8_lowinit.c b/configs/z8encore000zco/src/z8_boot.c
similarity index 97%
rename from configs/z8encore000zco/src/z8_lowinit.c
rename to configs/z8encore000zco/src/z8_boot.c
index 315b66da24a..ba2530d9c51 100644
--- a/configs/z8encore000zco/src/z8_lowinit.c
+++ b/configs/z8encore000zco/src/z8_boot.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * configs/z8encore000zco/src/z8_lowinit.c
+ * configs/z8encore000zco/src/z8_boot.c
  *
  *   Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
@@ -59,7 +59,7 @@ static void z8_gpioinit(void)
  * Public Functions
  ****************************************************************************/
 
-void z8_lowinit(void)
+void z8_board_initialize(void)
 {
   z8_gpioinit();
 }
diff --git a/configs/z8f64200100kit/src/Makefile b/configs/z8f64200100kit/src/Makefile
index 9aa595da231..e2d40fde742 100644
--- a/configs/z8f64200100kit/src/Makefile
+++ b/configs/z8f64200100kit/src/Makefile
@@ -36,6 +36,6 @@
 -include $(TOPDIR)/Make.defs
 
 ASRCS =
-CSRCS = z8_lowinit.c z8_leds.c
+CSRCS = z8_boot.c z8_leds.c
 
 include $(TOPDIR)/configs/Board.mk
diff --git a/configs/z8f64200100kit/src/z8_lowinit.c b/configs/z8f64200100kit/src/z8_boot.c
similarity index 97%
rename from configs/z8f64200100kit/src/z8_lowinit.c
rename to configs/z8f64200100kit/src/z8_boot.c
index 2250c6261ee..4064c442861 100644
--- a/configs/z8f64200100kit/src/z8_lowinit.c
+++ b/configs/z8f64200100kit/src/z8_boot.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * configs/z8f64200100kit/src/z8_lowinit.c
+ * configs/z8f64200100kit/src/z8_boot.c
  *
  *   Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
@@ -59,7 +59,7 @@ static void z8_gpioinit(void)
  * Public Functions
  ****************************************************************************/
 
-void z8_lowinit(void)
+void z8_board_initialize(void)
 {
   z8_gpioinit();
 }