tools/nxstyle.c: Fix logic that detects if an operator is correctly delimited with spaces. sched/: Various changes because sched/ C files were used as Guinea Pigs to test nstyle.c.

TODO

@@ -903,15 +903,24 @@ o pthreads (sched/pthreads libs/libc/pthread)
 
                1. The Use is not fully verified.  How are these interfaces
                   used?  How should they be tested?
+
                2. These interfaces depend on architecture specific support
                   support fraom each architecture that support is not be
                   fully available to the pthread library in all cases.
+
+                  There should a setting, say CONFIG_ARCH_HAVE_TESTSET=y
+                  that indicates if the architect provides up_testset().
+
                3. It is also restricted to CONFIG_BUILD_FLAT because the
                   critical test and set function (up_testset()) as
                   prototyped in include/nuttx/spinlock() does not permit an
                   inline function or macro to be used in user-mode
                   application space.
 
+                  Update: A better alternative would be to move the CPU-
+                  depending up_testset() implementation from the arch/
+                  directories and into libs/libc/machine.
+
                For these reasons, the selection is marked EXPERIMENTAL.
   Status:      Open
   Priority:    Low.  These are new interfaces and not yet in wide use.  The

arch/arm/src/common/up_createstack.c

@@ -74,7 +74,7 @@
 
 /* Stack alignment macros */
 
-#define STACK_ALIGN_MASK    (CONFIG_STACK_ALIGNMENT-1)
+#define STACK_ALIGN_MASK    (CONFIG_STACK_ALIGNMENT - 1)
 #define STACK_ALIGN_DOWN(a) ((a) & ~STACK_ALIGN_MASK)
 #define STACK_ALIGN_UP(a)   (((a) + STACK_ALIGN_MASK) & ~STACK_ALIGN_MASK)
 

sched/clock/clock_dow.c

@@ -51,7 +51,10 @@
 
 /* 23 * (month + 1) / 9, month = 0..11 */
 
-static const uint8_t g_lookup[12] = {2, 5, 7, 10, 12, 15, 17, 20, 23, 25, 28, 30};
+static const uint8_t g_lookup[12] =
+{
+  2, 5, 7, 10, 12, 15, 17, 20, 23, 25, 28, 30
+};
 
 /****************************************************************************
  * Public Functions

sched/clock/clock_initialize.c

@@ -293,7 +293,9 @@ void clock_synchronize(void)
 #if defined(CONFIG_RTC) && !defined(CONFIG_SCHED_TICKLESS)
 void clock_resynchronize(FAR struct timespec *rtc_diff)
 {
-  struct timespec rtc_time, bias, curr_ts;
+  struct timespec rtc_time;
+  struct timespec bias;
+  struct timespec curr_ts;
   struct timespec rtc_diff_tmp;
   irqstate_t flags;
   int32_t carry;

sched/environ/env_dup.c

@@ -137,6 +137,3 @@ int env_dup(FAR struct task_group_s *group)
 }
 
 #endif /* CONFIG_DISABLE_ENVIRON */
-
-
-

sched/environ/env_putenv.c

@@ -114,6 +114,3 @@ errout:
 }
 
 #endif /* CONFIG_DISABLE_ENVIRON */
-
-
-

sched/environ/env_release.c

@@ -95,6 +95,3 @@ void env_release(FAR struct task_group_s *group)
 }
 
 #endif /* CONFIG_DISABLE_ENVIRON */
-
-
-

sched/environ/env_removevar.c

@@ -115,6 +115,3 @@ int env_removevar(FAR struct task_group_s *group, FAR char *pvar)
 }
 
 #endif /* CONFIG_DISABLE_ENVIRON */
-
-
-

sched/environ/env_unsetenv.c

@@ -133,6 +133,3 @@ int unsetenv(FAR const char *name)
 }
 
 #endif /* CONFIG_DISABLE_ENVIRON */
-
-
-

sched/group/group_join.c

@@ -56,6 +56,7 @@
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
+
 /* Is this worth making a configuration option? */
 
 #define GROUP_REALLOC_MEMBERS 4

sched/group/group_killchildren.c

@@ -116,7 +116,7 @@ static int group_killchildren_handler(pid_t pid, FAR void *arg)
         }
     }
 
-  /* Always return zero.  We need to visit each member of the group*/
+  /* Always return zero.  We need to visit each member of the group. */
 
   return OK;
 }

sched/group/group_suspendchildren.c

@@ -87,7 +87,7 @@ static int group_suspendchildren_handler(pid_t pid, FAR void *arg)
         }
     }
 
-  /* Always return zero.  We need to visit each member of the group*/
+  /* Always return zero.  We need to visit each member of the group. */
 
   return OK;
 }

sched/mqueue/mq_send.c

@@ -122,8 +122,8 @@ int nxmq_send(mqd_t mqdes, FAR const char *msg, size_t msglen,
 
       if (msgq->nmsgs >= msgq->maxmsgs) /* Message queue not-FULL? */
         {
-         /* Yes.. the message queue is full.  Wait for space to become
+          /* Yes.. the message queue is full.  Wait for space to become
-          * available in the message queue.
+           * available in the message queue.
            */
 
           ret = nxmq_wait_send(mqdes);

sched/pthread/pthread_condbroadcast.c

@@ -121,5 +121,3 @@ int pthread_cond_broadcast(FAR pthread_cond_t *cond)
   sinfo("Returning %d\n", ret);
   return ret;
 }
-
-

sched/pthread/pthread_condsignal.c

@@ -113,5 +113,3 @@ int pthread_cond_signal(FAR pthread_cond_t *cond)
   sinfo("Returning %d\n", ret);
   return ret;
 }
-
-

sched/pthread/pthread_mutextrylock.c

@@ -211,6 +211,3 @@ int pthread_mutex_trylock(FAR pthread_mutex_t *mutex)
   sinfo("Returning %d\n", ret);
   return ret;
 }
-
-
-

sched/pthread/pthread_mutexunlock.c

@@ -199,45 +199,43 @@ int pthread_mutex_unlock(FAR pthread_mutex_t *mutex)
 #endif /* !CONFIG_PTHREAD_MUTEX_UNSAFE || CONFIG_PTHREAD_MUTEX_TYPES */
 
 #ifdef CONFIG_PTHREAD_MUTEX_TYPES
-        /* Yes, the caller owns the semaphore.. Is this a recursive mutex? */
+      /* Yes, the caller owns the semaphore.. Is this a recursive mutex? */
 
-        if (mutex->type == PTHREAD_MUTEX_RECURSIVE && mutex->nlocks > 1)
+      if (mutex->type == PTHREAD_MUTEX_RECURSIVE && mutex->nlocks > 1)
-          {
+        {
-            /* This is a recursive mutex and we there are multiple locks held. Retain
+          /* This is a recursive mutex and we there are multiple locks held. Retain
-             * the mutex lock, just decrement the count of locks held, and return
+           * the mutex lock, just decrement the count of locks held, and return
-             * success.
+           * success.
-             */
+           */
 
-            mutex->nlocks--;
+          mutex->nlocks--;
-            ret = OK;
+          ret = OK;
-          }
+        }
-        else
+      else
 
 #endif /* CONFIG_PTHREAD_MUTEX_TYPES */
 
-          /* This is either a non-recursive mutex or is the outermost unlock of
+        /* This is either a non-recursive mutex or is the outermost unlock of
-           * a recursive mutex.
+         * a recursive mutex.
-           *
+         *
-           * In the case where the calling thread is NOT the holder of the thread,
+         * In the case where the calling thread is NOT the holder of the thread,
-           * the behavior is undefined per POSIX.  Here we do the same as GLIBC:
+         * the behavior is undefined per POSIX.  Here we do the same as GLIBC:
-           * We allow the other thread to release the mutex even though it does
+         * We allow the other thread to release the mutex even though it does
-           * not own it.
+         * not own it.
-           */
+         */
 
-          {
+        {
-            /* Nullify the pid and lock count then post the semaphore */
+          /* Nullify the pid and lock count then post the semaphore */
 
-            mutex->pid    = -1;
+          mutex->pid    = -1;
 #ifdef CONFIG_PTHREAD_MUTEX_TYPES
-            mutex->nlocks = 0;
+          mutex->nlocks = 0;
 #endif
-            ret = pthread_mutex_give(mutex);
+          ret = pthread_mutex_give(mutex);
-          }
+        }
     }
 
   sched_unlock();
   sinfo("Returning %d\n", ret);
   return ret;
 }
-
-

sched/sched/sched_foreach.c

@@ -90,5 +90,3 @@ void sched_foreach(sched_foreach_t handler, FAR void *arg)
       leave_critical_section(flags);
     }
 }
-
-

sched/sched/sched_getsockets.c

@@ -72,5 +72,3 @@ FAR struct socketlist *sched_getsockets(void)
   return &group->tg_socketlist;
 }
 #endif
-
-

sched/signal/sig_allocpendingsigaction.c

@@ -83,7 +83,8 @@ FAR sigq_t *nxsig_alloc_pendingsigaction(void)
     }
 
   /* If we were not called from an interrupt handler, then we are
-   * free to allocate pending signal action structures if necessary. */
+   * free to allocate pending signal action structures if necessary.
+   */
 
   else
     {

sched/signal/sig_default.c

@@ -512,8 +512,9 @@ bool nxsig_iscatchable(int signo)
 
   if (handler == SIG_IGN)
     {
-      /* We are unsetting the default action */
+      /* We are unsetting the default action.  NOTE that sigdelset() is not
-      /* sigdelset() is not atomic (but neither is sigaction()) */
+       * atomic (but neither is sigaction()).
+       */
 
       flags = spin_lock_irqsave();
       (void)sigdelset(&group->tg_sigdefault, signo);

sched/signal/sig_dispatch.c

@@ -93,7 +93,8 @@ static int nxsig_queue_action(FAR struct tcb_s *stcb, siginfo_t *info)
     {
       /* Allocate a new element for the signal queue.  NOTE:
        * nxsig_alloc_pendingsigaction will force a system crash if it is
-       * unable to allocate memory for the signal data */
+       * unable to allocate memory for the signal data.
+       */
 
       sigq = nxsig_alloc_pendingsigaction();
       if (!sigq)

sched/signal/sig_releasependingsigaction.c

@@ -68,7 +68,8 @@ void nxsig_release_pendingsigaction(FAR sigq_t *sigq)
   if (sigq->type == SIG_ALLOC_FIXED)
     {
       /* Make sure we avoid concurrent access to the free
-       * list from interrupt handlers. */
+       * list from interrupt handlers.
+       */
 
       flags = enter_critical_section();
       sq_addlast((FAR sq_entry_t *)sigq, &g_sigpendingaction);
@@ -82,7 +83,8 @@ void nxsig_release_pendingsigaction(FAR sigq_t *sigq)
   else if (sigq->type == SIG_ALLOC_IRQ)
     {
       /* Make sure we avoid concurrent access to the free
-       * list from interrupt handlers. */
+       * list from interrupt handlers.
+       */
 
       flags = enter_critical_section();
       sq_addlast((FAR sq_entry_t *)sigq, &g_sigpendingirqaction);

sched/signal/sig_timedwait.c

@@ -434,14 +434,14 @@ int nxsig_timedwait(FAR const sigset_t *set, FAR struct siginfo *info,
             }
           else
 #endif
-           {
+            {
-             /* We were awakened by a timeout.  Set EAGAIN and return an
+              /* We were awakened by a timeout.  Set EAGAIN and return an
-              * error.
+               * error.
-              */
+               */
 
-             DEBUGASSERT(rtcb->sigunbinfo.si_signo == SIG_WAIT_TIMEOUT);
+              DEBUGASSERT(rtcb->sigunbinfo.si_signo == SIG_WAIT_TIMEOUT);
-             ret = -EAGAIN;
+              ret = -EAGAIN;
-           }
+            }
         }
 
       /* Return the signal info to the caller if so requested */

sched/task/task_atexit.c

@@ -152,5 +152,3 @@ int atexit(void (*func)(void))
 }
 
 #endif /* CONFIG_SCHED_ATEXIT */
-
-

sched/task/task_onexit.c

@@ -149,5 +149,3 @@ int on_exit(CODE void (*func)(int, FAR void *), FAR void *arg)
 }
 
 #endif /* CONFIG_SCHED_ONEXIT */
-
-

sched/wqueue/kwork_notifier.c

@@ -324,7 +324,8 @@ void work_notifier_signal(enum work_evtype_e evtype,
   sched_lock();
 
   /* Process the notification at the head of the pending list until the
-   * pending list is empty  */
+   * pending list is empty
+   */
 
   for (entry = dq_peek(&g_notifier_pending);
        entry != NULL;