From f86287fd4316cc9d7b344a559b93b9898a92ae07 Mon Sep 17 00:00:00 2001
From: Gregory Nutt <gnutt@nuttx.org>
Date: Sat, 27 May 2017 09:23:23 -0600
Subject: [PATCH] PIC32MXMMB: Fix a few copy-paste errors.

---
 configs/pic32mx7mmb/src/pic32_mio283qt2.c | 2 +-
 configs/pic32mx7mmb/src/pic32_usbdev.c    | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/configs/pic32mx7mmb/src/pic32_mio283qt2.c b/configs/pic32mx7mmb/src/pic32_mio283qt2.c
index 16b1c7518ad..d740edd700c 100644
--- a/configs/pic32mx7mmb/src/pic32_mio283qt2.c
+++ b/configs/pic32mx7mmb/src/pic32_mio283qt2.c
@@ -1,5 +1,5 @@
 /**************************************************************************************
- * configs/stm32fdiscover/src/pic32_mio283qt2.c
+ * configs/pic32mx7mmb/src/pic32_mio283qt2.c
  *
  * Interface definition for the MI0283QT-2 LCD from Multi-Inno Technology Co., Ltd.
  * This LCD is based on the Himax HX8347-D LCD controller.
diff --git a/configs/pic32mx7mmb/src/pic32_usbdev.c b/configs/pic32mx7mmb/src/pic32_usbdev.c
index 75e4c4cff6b..fe3481b5bc5 100644
--- a/configs/pic32mx7mmb/src/pic32_usbdev.c
+++ b/configs/pic32mx7mmb/src/pic32_usbdev.c
@@ -130,7 +130,7 @@ void weak_function pic32mx_usbdevinitialize(void)
  * Description:
  *   If USB is supported and the board supports a pullup via GPIO (for USB
  *   software connect and disconnect), then the board software must provide
- *   stm32_pullup. See include/nuttx/usb/usbdev.h for additional description
+ *   pic32mx_pullup. See include/nuttx/usb/usbdev.h for additional description
  *   of this method.  Alternatively, if no pull-up GPIO the following EXTERN
  *   can be redefined to be NULL.
  *
@@ -147,7 +147,7 @@ int pic32mx_usbpullup(FAR struct usbdev_s *dev,  bool enable)
  * Name: pic32mx_usbsuspend
  *
  * Description:
- *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver
+ *   Board logic must provide the pic32mx_usbsuspend logic if the USBDEV driver
  *   is used.  This function is called whenever the USB enters or leaves
  *   suspend mode. This is an opportunity for the board logic to shutdown
  *   clocks, power, etc. while the USB is suspended.