nucleo-f446re: add qenco example configuration

boards/arm/stm32/nucleo-f446re/Kconfig

@@ -5,10 +5,18 @@
 
 if ARCH_BOARD_NUCLEO_F446RE
 
+if SENSORS_QENCODER
+
 config NUCLEO_F446RE_QETIMER
 	int "Timer to use with QE encoder"
 	default 3
-	depends on SENSORS_QENCODER
+
+config NUCLEO_F446RE_QETIMER_TIM2_IHM08M1_MAP
+	bool "Use TIM2 QE pins to match IHM08M1 board pins"
+	default n
+	depends on STM32_TIM2_QE
+
+endif # SENSORS_QENCODER
 
 config NUCLEO_F446RE_AJOY_MINBUTTONS
 	bool "Minimal Joystick Buttons"

boards/arm/stm32/nucleo-f446re/configs/qenco/defconfig

@@ -0,0 +1,52 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="nucleo-f446re"
+CONFIG_ARCH_BOARD_NUCLEO_F446RE=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F446R=y
+CONFIG_ARCH_INTERRUPTSTACK=1024
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_BOARD_LOOPSPERMSEC=8499
+CONFIG_BOARD_STM32_COMMON=y
+CONFIG_BUILTIN=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_EXAMPLES_QENCODER=y
+CONFIG_EXAMPLES_QENCODER_HAVE_MAXPOS=y
+CONFIG_EXAMPLES_QENCODER_MAXPOS=8192
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MQ_MAXMSGSIZE=5
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NUCLEO_F446RE_QETIMER=2
+CONFIG_NUCLEO_F446RE_QETIMER_TIM2_IHM08M1_MAP=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=16386
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SENSORS=y
+CONFIG_SENSORS_QENCODER=y
+CONFIG_START_DAY=14
+CONFIG_START_MONTH=10
+CONFIG_START_YEAR=2014
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_QENCODER_DISABLE_EXTEND16BTIMERS=y
+CONFIG_STM32_QENCODER_SAMPLE_FDTS_2=y
+CONFIG_STM32_TIM2=y
+CONFIG_STM32_TIM2_QE=y
+CONFIG_STM32_TIM2_QEPSC=0
+CONFIG_STM32_USART2=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USART2_SERIAL_CONSOLE=y
+CONFIG_USER_ENTRYPOINT="nsh_main"

boards/arm/stm32/nucleo-f446re/include/board.h

@@ -377,10 +377,18 @@
 
 #define BUTTON_USER_BIT    (1 << BUTTON_USER)
 
-#define GPIO_TIM2_CH1IN (GPIO_TIM2_CH1IN_1 | GPIO_PULLUP)
+/* TIM2 input ***************************************************************/
-#define GPIO_TIM2_CH2IN (GPIO_TIM2_CH2IN_1 | GPIO_PULLUP)
+
+#ifndef CONFIG_NUCLEO_F446RE_QETIMER_TIM2_IHM08M1_MAP
+#  define GPIO_TIM2_CH1IN (GPIO_TIM2_CH1IN_1 | GPIO_PULLUP) /* PA8 */
+#  define GPIO_TIM2_CH2IN (GPIO_TIM2_CH2IN_1 | GPIO_PULLUP) /* PB0 */
+#else
+#  define GPIO_TIM2_CH1IN (GPIO_TIM2_CH1IN_2 | GPIO_PULLUP) /* PA15 */
+#  define GPIO_TIM2_CH2IN (GPIO_TIM2_CH2IN_2 | GPIO_PULLUP) /* PB3 */
+#endif
 
 /* TIM3 configuration *******************************************************/
+
 #define GPIO_TIM3_CH1OUT GPIO_TIM3_CH1OUT_1
 
 #ifdef CONFIG_BOARD_STM32_IHM08M1