configs/stm32i10e-eval/nsh converted to use the kconfig-frontends tools

ChangeLog

@@ -6700,4 +6700,6 @@
           kconfig-frontends tools (2014-3-1).
         * configs/stm3220g-eval/nsh2: Configuration converted to use the
           kconfig-frontends tools (2014-3-1).
+        * configs/stm3210e-eval/nsh: Configuration converted to use the
+          kconfig-frontends tools (2014-3-1).
 

configs/stm3210e-eval/README.txt

@@ -714,8 +714,9 @@ Where <subdir> is one of the following:
     =========== ======================= ================================
                 nsh                     nsh2
     =========== ======================= ================================
-    Toolchain:  NuttX buildroot for     Codesourcery for Windows (1)
+    Platform    Windows with Cygwin (2) Windows with Cygwin (2)
-                Linux or Cygwin (1,2)
+    ----------- ----------------------- --------------------------------
+    Toolchain:  NuttX buildroot (1)     Codesourcery for Windows (1)
     ----------- ----------------------- --------------------------------
     Loader:     DfuSe                   DfuSe
     ----------- ----------------------- --------------------------------
@@ -769,22 +770,31 @@ Where <subdir> is one of the following:
 
         Failure to do this could result in corruption of the SD card format.
 
-    The nsh2 contains support for some built-in applications that can be
+    1. Both configurations use the mconf-based configuration tool.  To
-    enabled by make some additional minor changes:
+       change these configurations using that tool, you should:
 
-    (1) examples/can.  The CAN test example can be enabled by changing the
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-        following settings in nsh2/defconfig:
+          and misc/tools/
 
-        CONFIG_CAN=y             # Enable CAN "upper-half" driver support
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
-        CONFIG_STM32_CAN1=y      # Enable STM32 CAN1 "lower-half" driver support
+          reconfiguration process.
 
-        The default CAN settings may need to change in your board board
+    2. The nsh2 contains support for some built-in applications that can be
-        configuration:
+       enabled by make some additional minor changes:
 
-        CONFIG_CAN_EXTID=y       # Support extended IDs
+       a. examples/can.  The CAN test example can be enabled by changing the
-        CONFIG_CAN1_BAUD=250000  # Bit rate: 250 KHz
+          following settings in nsh2/defconfig:
-        CONFIG_CAN_TSEG1=12      # 80% sample point
+
-        CONFIG_CAN_TSEG2=3
+          CONFIG_CAN=y             # Enable CAN "upper-half" driver support
+          CONFIG_STM32_CAN1=y      # Enable STM32 CAN1 "lower-half" driver support
+
+          The default CAN settings may need to change in your board board
+          configuration:
+
+          CONFIG_CAN_EXTID=y       # Support extended IDs
+          CONFIG_CAN1_BAUD=250000  # Bit rate: 250 KHz
+          CONFIG_CAN_TSEG1=12      # 80% sample point
+          CONFIG_CAN_TSEG2=3
   nx:
   ---
     An example using the NuttX graphics system (NX).  This example

configs/stm3210e-eval/nsh/appconfig

@@ -1,42 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/nsh/appconfig
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nsh
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-