build/Kconfig: fix warnings detected by kconfiglib

Signed-off-by: chao an <anchao@xiaomi.com>

arch/arm/Kconfig

@@ -60,7 +60,7 @@ config ARCH_CHIP_A1X
 	select ARCH_HAVE_LOWVECTORS
 	select ARCH_HAVE_FETCHADD
 	select ARCH_HAVE_SDRAM
-	select BOOT_RUNFROMSDRAM
+	depends on BOOT_RUNFROMSDRAM
 	select ARCH_HAVE_ADDRENV
 	select ARCH_NEED_ADDRENV_MAPPING
 	---help---
@@ -74,7 +74,7 @@ config ARCH_CHIP_AM335X
 	select ARCH_HAVE_LOWVECTORS
 	select ARCH_HAVE_FETCHADD
 	select ARCH_HAVE_SDRAM
-	select BOOT_RUNFROMSDRAM
+	depends on BOOT_RUNFROMSDRAM
 	select ARCH_HAVE_ADDRENV
 	select ARCH_NEED_ADDRENV_MAPPING
 	---help---
@@ -144,7 +144,7 @@ config ARCH_CHIP_IMX6
 	select ARCH_HAVE_LOWVECTORS
 	select ARCH_HAVE_FETCHADD
 	select ARCH_HAVE_SDRAM
-	select BOOT_RUNFROMSDRAM
+	depends on BOOT_RUNFROMSDRAM
 	select ARCH_HAVE_ADDRENV
 	select ARCH_NEED_ADDRENV_MAPPING
 	---help---
@@ -1358,7 +1358,7 @@ if ARCH_CHIP_S32K1XX
 source "arch/arm/src/s32k1xx/Kconfig"
 endif
 if ARCH_CHIP_S32K3XX
-source arch/arm/src/s32k3xx/Kconfig
+source "arch/arm/src/s32k3xx/Kconfig"
 endif
 if ARCH_CHIP_MAX326XX
 source "arch/arm/src/max326xx/Kconfig"
@@ -1415,7 +1415,7 @@ if ARCH_CHIP_STM32U5
 source "arch/arm/src/stm32u5/Kconfig"
 endif
 if ARCH_CHIP_STM32WB
-source arch/arm/src/stm32wb/Kconfig
+source "arch/arm/src/stm32wb/Kconfig"
 endif
 if ARCH_CHIP_STM32WL5
 source "arch/arm/src/stm32wl5/Kconfig"

arch/arm/src/efm32/Kconfig

@@ -308,14 +308,14 @@ choice
 config LEUART0_SERIAL_CONSOLE
 	bool "Use LEUART0 as the serial console"
 	depends on EFM32_LEUART0
-	select OTHER_SERIAL_CONSOLE
+	depends on OTHER_SERIAL_CONSOLE
 	---help---
 		Use the LEUART0 device as the serial console
 
 config LEUART1_SERIAL_CONSOLE
 	bool "Use LEUART1 as the serial console"
 	depends on EFM32_LEUART1
-	select OTHER_SERIAL_CONSOLE
+	depends on OTHER_SERIAL_CONSOLE
 	---help---
 		Use the LEUART0 device as the serial console
 

arch/arm/src/imx6/Kconfig

@@ -181,19 +181,19 @@ choice
 
 config IMX6_BOOT_OCRAM
 	bool "Running from internal OCRAM"
-	select BOOT_RUNFROMISRAM
+	depends on BOOT_RUNFROMISRAM
 
 config IMX6_BOOT_SDRAM
 	bool "Running from external SDRAM"
-	select BOOT_RUNFROMSDRAM
+	depends on BOOT_RUNFROMSDRAM
 
 config IMX6_BOOT_NOR
 	bool "Running from external NOR FLASH"
-	select BOOT_RUNFROMFLASH
+	depends on BOOT_RUNFROMFLASH
 
 config IMX6_BOOT_SRAM
 	bool "Running from external SRAM"
-	select BOOT_RUNFROMEXTSRAM
+	depends on BOOT_RUNFROMEXTSRAM
 
 endchoice # i.MX6 Boot Configuration
 

arch/arm/src/imxrt/Kconfig

@@ -1776,7 +1776,7 @@ endchoice # i.MX RT Ethernet Interface
 
 choice
 	prompt "i.MX RT Ethernet TX Clock Source"
-	default IMXRT_PROVIDES_TXC
+	default IMXRT_MAC_PROVIDES_TXC
 	depends on IMXRT_ENET
 
 config IMXRT_MAC_PROVIDES_TXC
@@ -1892,21 +1892,21 @@ choice
 
 config IMXRT_BOOT_OCRAM
 	bool "Running from internal OCRAM"
-	select BOOT_RUNFROMISRAM
+	depends on BOOT_RUNFROMISRAM
 
 config IMXRT_BOOT_SDRAM
 	bool "Running from external SDRAM"
-	select BOOT_RUNFROMSDRAM
+	depends on BOOT_RUNFROMSDRAM
 	depends on IMXRT_SEMC_SDRAM
 
 config IMXRT_BOOT_NOR
 	bool "Running from external NOR FLASH"
-	select BOOT_RUNFROMFLASH
+	depends on BOOT_RUNFROMFLASH
 	depends on IMXRT_SEMC_NOR
 
 config IMXRT_BOOT_SRAM
 	bool "Running from external SRAM"
-	select BOOT_RUNFROMEXTSRAM
+	depends on BOOT_RUNFROMEXTSRAM
 	depends on IMXRT_SEMC_SRAM
 
 endchoice # i.MX RT Boot Configuration

arch/arm/src/nrf52/Kconfig

@@ -664,8 +664,7 @@ menuconfig NRF52_SOFTDEVICE_CONTROLLER
 	select ARMV7M_USEBASEPRI
 	select ARCH_RAMVECTORS
 	select ARCH_IRQPRIO
-	select NRF52_USE_LFCLK
+	depends on NRF52_LFCLK_XTAL
-	select NRF52_LFCLK_XTAL
 	---help---
 		This enables use of Nordic SoftDevice controller
 		(SDC). It is a library version of a subset of 

arch/arm/src/sama5/Kconfig

@@ -4415,7 +4415,7 @@ if SAMA5_ADC_PWMTRIG
 
 choice
 	prompt "PWM Event Line Selection"
-	default SAMA5_ADC_PWMTRIG_LINE0
+	default SAMA5_ADC_PWM_TRIG_LINE0
 
 config SAMA5_ADC_PWM_TRIG_LINE0
 	bool "PWM event Line 0"

arch/arm/src/stm32/Kconfig

@@ -2760,7 +2760,7 @@ config STM32_CORDIC
 	bool "CORDIC Accelerator"
 	default n
 	depends on STM32_HAVE_CORDIC
-	select MATH_CORDIC_USE_Q31
+	depends on MATH_CORDIC_USE_Q31
 
 config STM32_BKP
 	bool "BKP"

arch/avr/src/avr/Kconfig

@@ -63,7 +63,7 @@ menu "Atmel AVR Toolchain options"
 config AVR_HAS_MEMX_PTR
 	bool "Enable in-flash static const stings"
 	depends on AVR_ATMEL_AVR_TOOLCHAIN
-	select ARCH_DEBUG_H
+	depends on ARCH_DEBUG_H
 	default y
 	---help---
 		Enabling this option (recommended) will place all constant

arch/sparc/Kconfig

@@ -62,9 +62,9 @@ config ARCH_CHIP
 	default "bm3823"	if ARCH_CHIP_BM3823
 	default "s698pm"	if ARCH_CHIP_S698PM
 
-source arch/sparc/src/sparc_v8/Kconfig
+source "arch/sparc/src/sparc_v8/Kconfig"
-source arch/sparc/src/bm3803/Kconfig
+source "arch/sparc/src/bm3803/Kconfig"
-source arch/sparc/src/bm3823/Kconfig
+source "arch/sparc/src/bm3823/Kconfig"
-source arch/sparc/src/s698pm/Kconfig
+source "arch/sparc/src/s698pm/Kconfig"
 
 endif

arch/z80/src/ez80/Kconfig

@@ -88,7 +88,7 @@ endchoice # ZDS-II Toolchain version
 config EZ80_BOOTLOADER
 	bool
 	default n
-	select BOOT_RUNFROMFLASH
+	depends on BOOT_RUNFROMFLASH
 	---help---
 		Binary image is a bootloader that may require special properties
 		such as re-direction of interrupts (eZ80F92)
@@ -96,7 +96,7 @@ config EZ80_BOOTLOADER
 config EZ80_PROGRAM
 	bool
 	default n
-	select BOOT_RUNFROMEXTSRAM
+	depends on BOOT_RUNFROMEXTSRAM
 	---help---
 		Binary image is a RAM-resident program loaded by a bootloader and
 		may require special properties such as re-direction of interrupts

arch/z80/src/z180/Kconfig

@@ -533,7 +533,7 @@ endmenu
 
 choice
 	prompt "Serial console"
-	default Z180_NO_SERIAL_CONSOLE
+	default Z180_UART0_SERIAL_CONSOLE
 	depends on DEV_CONSOLE
 
 config Z180_UART0_SERIAL_CONSOLE

arch/z80/src/z8/Kconfig

@@ -52,7 +52,7 @@ config Z8_TOOLCHAIN_ZDSII
 
 choice
 	prompt "ZDS-II Toolchain version"
-	default EZ80_ZDSII_V522
+	default Z8_ZDSII_V522
 
 config Z8_ZDSII_V500
 	bool "ZDS-II 5.0.0"

boards/Kconfig

@@ -315,9 +315,7 @@ config ARCH_BOARD_TTGO_T5V2_ESP32
 	select LCD
 	select LCD_DEV
 	select LCD_FRAMEBUFFER
-	select LCD_PORTRAIT
 	select LCD_SSD1680
-	select LCD_SSD1680_2_90
 	---help---
 		TTGO T5v2 is an ESP32 board with e-ink 2.9 inch display.
 		Display resolution 128/296. More info:
@@ -1444,7 +1442,7 @@ config ARCH_BOARD_NUCLEO_F446RE
 
 
 config ARCH_BOARD_STM32G071B_DISCO
-	bool "STM32G071 STM32G071B-DISO "
+	bool "STM32G071 STM32G071B-DISO"
 	depends on ARCH_CHIP_STM32G071RB
 	select ARCH_HAVE_LEDS
 	---help---
@@ -1797,7 +1795,6 @@ config ARCH_BOARD_SAMA5D2_XULT
 config ARCH_BOARD_GIANT_BOARD
 	bool "Groboards Giant Board (SAMA5D27C-D1G)"
 	depends on ARCH_CHIP_ATSAMA5D27
-	select SAMA5D27_GIANT_BOARD_492MHZ
 	select ARCH_HAVE_LEDS
 	---help---
 		This options selects support for NuttX on the Groboards Giant Board,

boards/arm/gd32f4/gd32f450zk-eval/Kconfig

@@ -36,14 +36,11 @@ config GD32F450ZK_EVAL_CONSOLE_BOARD
 	bool "Eval Com Connector"
 	select GD32_USART0
 	select USART0_SERIALDRIVER
-	select USART0_SERIAL_CONSOLE
-	select GD32F4_FLASH_CONFIG_K
 
 config GD32F450ZK_EVAL_CONSOLE_VIRTUAL
 	bool "Virtual Comport"
 	select GD32_USART3
 	select USART3_SERIALDRIVER
-	select USART3_SERIAL_CONSOLE
 
 config GD32F450ZK_EVAL_CONSOLE_NONE
 	bool "No Console"

boards/arm/lpc17xx_40xx/lx_cpu/Kconfig

@@ -7,7 +7,7 @@ if ARCH_BOARD_LX_CPU
 
 choice
 	prompt "LX_CPU ode and boot memory selection"
-	default LX_CPU_BOOT_APP
+	default LX_CPU_BOOT_FLASH_APP
 	depends on ARCH_BOARD_LX_CPU
 	---help---
 		Select where NuttX code/text is stored and how it is started.

boards/arm/samd5e5/metro-m4/Kconfig

@@ -11,13 +11,13 @@ choice
 
 config METRO_M4_RUNFROMFLASH
 	bool "Run from FLASH"
-	select BOOT_RUNFROMFLASH
+	depends on BOOT_RUNFROMFLASH
 	---help---
 		This is the normal configuration for building METRO M4 code.
 
 config METRO_M4_RUNFROMSRAM
 	bool "Run from SRAM"
-	select BOOT_RUNFROMISRAM
+	depends on BOOT_RUNFROMISRAM
 	---help---
 		During early bring-up, it is safer to execute entirely from
 		SRAM until you are confident in the initialization logic.

boards/arm/samd5e5/same54-xplained-pro/Kconfig

@@ -11,14 +11,14 @@ choice
 
 config SAME54_XPLAINED_PRO_RUNFROMFLASH
 	bool "Run from FLASH"
-	select BOOT_RUNFROMFLASH
+	depends on BOOT_RUNFROMFLASH
 	---help---
 		This is the normal configuration for building SAM E54 Xplained
 		Pro code.
 
 config SAME54_XPLAINED_PRO_RUNFROMSRAM
 	bool "Run from SRAM"
-	select BOOT_RUNFROMISRAM
+	depends on BOOT_RUNFROMISRAM
 	---help---
 		During early bring-up, it is safer to execute entirely from
 		SRAM until you are confident in the initialization logic.

boards/arm/stm32/b-g431b-esc1/Kconfig

@@ -7,7 +7,7 @@ if ARCH_BOARD_B_G431B_ESC1
 
 choice
 	prompt "PLL clock source"
-	default BOARD_STM32_BG431BESC1_HSI
+	default BOARD_STM32_BG431BESC1_USE_HSI
 
 config BOARD_STM32_BG431BESC1_USE_HSI
 	bool "HSI"

boards/arm/stm32/nucleo-f429zi/Kconfig

@@ -36,13 +36,11 @@ config NUCLEO_F429ZI_CONSOLE_ARDUINO
 	bool "Arduino Connector"
 	select STM32_USART6
 	select USART6_SERIALDRIVER
-	select USART6_SERIAL_CONSOLE
 
 config NUCLEO_F429ZI_CONSOLE_VIRTUAL
 	bool "Virtual Comport"
 	select STM32_USART3
 	select USART3_SERIALDRIVER
-	select USART3_SERIAL_CONSOLE
 
 config NUCLEO_F429ZI_CONSOLE_NONE
 	bool "No Console"

boards/arm/stm32/nucleo-g431rb/Kconfig

@@ -7,7 +7,7 @@ if ARCH_BOARD_NUCLEO_G431RB
 
 choice
 	prompt "PLL Clock source"
-	default BOARD_NUCLEO_G431RB_HSI
+	default BOARD_NUCLEO_G431RB_USE_HSI
 
 config BOARD_NUCLEO_G431RB_USE_HSI
 	bool "HSI"

boards/arm/stm32f7/nucleo-144/Kconfig

@@ -81,25 +81,21 @@ config NUCLEO_CONSOLE_ARDUINO
 	bool "Arduino Connector"
 	select STM32F7_USART6
 	select USART6_SERIALDRIVER
-	select USART6_SERIAL_CONSOLE
 
 config NUCLEO_CONSOLE_VIRTUAL
 	bool "Virtual Comport"
 	select STM32F7_USART3
 	select USART3_SERIALDRIVER
-	select USART3_SERIAL_CONSOLE
 
 config NUCLEO_CONSOLE_MORPHO
 	bool "Morpho Connector"
 	select STM32F7_UART8
 	select UART8_SERIALDRIVER
-	select UART8_SERIAL_CONSOLE
 
 config NUCLEO_CONSOLE_MORPHO_UART4
 	bool "Morpho Connector UART4"
 	select STM32F7_UART4
 	select UART4_SERIALDRIVER
-	select UART4_SERIAL_CONSOLE
 
 config NUCLEO_CONSOLE_NONE
 	bool "No Console"

boards/arm/stm32wl5/nucleo-wl55jc/Kconfig

@@ -238,7 +238,7 @@ config ARCH_BOARD_FLASH_PART1_FS
 
 choice
 	prompt "Filesystem of user partition 1"
-	default ARCH_BOARD_FLASH_PART1_FS_RAW
+	default ARCH_BOARD_FLASH_PART1_FS_RAWFS
 
 config ARCH_BOARD_FLASH_PART1_FS_RAWFS
 	bool "rawfs"
@@ -304,7 +304,7 @@ config ARCH_BOARD_FLASH_PART2_FS
 
 choice
 	prompt "Filesystem of user partition 2"
-	default ARCH_BOARD_FLASH_PART2_FS_RAW
+	default ARCH_BOARD_FLASH_PART2_FS_RAWFS
 
 config ARCH_BOARD_FLASH_PART2_FS_RAWFS
 	bool "rawfs"
@@ -347,7 +347,7 @@ config ARCH_BOARD_FLASH_PART3_FS
 
 choice
 	prompt "Filesystem of user partition 3"
-	default ARCH_BOARD_FLASH_PART3_FS_RAW
+	default ARCH_BOARD_FLASH_PART3_FS_RAWFS
 
 config ARCH_BOARD_FLASH_PART3_FS_RAWFS
 	bool "rawfs"
@@ -390,7 +390,7 @@ config ARCH_BOARD_FLASH_PART4_FS
 
 choice
 	prompt "Filesystem of user partition 4"
-	default ARCH_BOARD_FLASH_PART4_FS_RAW
+	default ARCH_BOARD_FLASH_PART4_FS_RAWFS
 
 config ARCH_BOARD_FLASH_PART4_FS_RAWFS
 	bool "rawfs"

boards/arm/tiva/tm4c1294-launchpad/Kconfig

@@ -75,7 +75,7 @@ endif # TIVA_TIMER32_PERIODIC
 config TM4C1294_LAUNCHPAD_JUMPERS_CAN
 	bool "Use CAN jumpers configuration"
 	default n
-	select TIVA_UART2
+	depends on TIVA_UART2
 	---help---
 		If set, NuttX will assume the jumpers JP4 and JP5 are set in CAN configuration.
 		This means UART2 will be connected to the ICDI serial port.

boards/z80/ez80/z20x/Kconfig

@@ -21,7 +21,7 @@ config Z20X_SDBOOT
 
 config Z20X_W25BOOT
 	bool "W25 boot loader"
-	select Z20X_W25_CHARDEV
+	depends on Z20X_W25_CHARDEV
 	select LIBC_HEX2BIN
 	select EZ80_BOOTLOADER
 	depends on EZ80_SPI && MTD_W25
@@ -39,14 +39,14 @@ config Z20X_PROGRAM
 
 config Z20X_STANDALONE
 	bool "Standalone FLASH progroam"
-	select BOOT_RUNFROMFLASH
+	depends on BOOT_RUNFROMFLASH
 	---help---
 		Select this option only to build a small program that executes
 		from z20x FLASH memory.
 
 config Z20X_COPYTORAM
 	bool "Copy to RAM"
-	select BOOT_RUNFROMEXTSRAM
+	depends on BOOT_RUNFROMEXTSRAM
 	---help---
 		This option is available only when running from external SRAM
 		(CONFIG_BOOT_RUNFROMEXTSRAM).  In that case there are two possible

drivers/serial/Kconfig

@@ -199,7 +199,7 @@ config TTY_LAUNCH_PRIORITY
 	default INIT_PRIORITY
 
 config TTY_LAUNCH_STACKSIZE
-	hex "TTY launch program stack size"
+	int "TTY launch program stack size"
 	default INIT_STACKSIZE
 
 choice

drivers/virtio/Kconfig

@@ -7,27 +7,22 @@ menuconfig DRIVERS_VIRTIO
 	bool "Virtio Device Support"
 	depends on !OPENAMP
 	default n
-	---help---
 
 if DRIVERS_VIRTIO
 menuconfig DRIVERS_VIRTIO_MMIO_NUM
 	int "The number of virtio mmio devices"
 	default 1
-	---help---
 
 if DRIVERS_VIRTIO_MMIO_NUM != 0
 menuconfig DRIVERS_VIRTIO_MMIO_BASE
 	hex "Virtio-mmio base address"
-	---help---
 
 menuconfig DRIVERS_VIRTIO_MMIO_REGSIZE
 	hex "Virtio-mmio register size"
 	default 0
-	---help---
 
 menuconfig DRIVERS_VIRTIO_MMIO_IRQ
 	int "Virtio-mmio irq number"
-	---help---
 
 endif
 
@@ -36,13 +31,11 @@ menuconfig DRIVERS_VIRTIO_NET
 	default n
 	depends on DRIVERS_VIRTIO_MMIO_NUM > 0
 	select ARCH_HAVE_NETDEV_STATISTICS
-	---help---
 
 if DRIVERS_VIRTIO_NET
 config DRIVERS_VIRTIO_NET_QUEUE_LEN
 	int "Queue length"
 	default 16
-	---help---
 
 endif
 endif

libs/libc/machine/Kconfig

@@ -206,7 +206,7 @@ source "libs/libc/machine/renesas/Kconfig"
 endif
 
 if ARCH_SPARC
-source libs/libc/machine/sparc/Kconfig
+source "libs/libc/machine/sparc/Kconfig"
 endif
 
 endmenu # Architecture-Specific Support

net/usrsock/Kconfig

@@ -42,7 +42,6 @@ config NET_USRSOCK_UDP
 	bool "User-space daemon provides UDP sockets"
 	default n
 	select NET_UDP_NO_STACK
-	---help---
 
 config NET_USRSOCK_TCP
 	bool "User-space daemon provides TCP sockets"