Rename up_buttoninit to board_button_intialize

configs/avr32dev1/include/board.h

@@ -1,8 +1,7 @@
 /************************************************************************************
  * configs/avr32dev1/include/board.h
- * include/arch/board/board.h
  *
- *   Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2010-2011, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -34,8 +33,8 @@
  *
  ************************************************************************************/
 
-#ifndef __ARCH_BOARD_BOARD_H
+#ifndef __CONFIGS_AVR32DEV1_INCLUDE_BOARD_H
-#define __ARCH_BOARD_BOARD_H
+#define __CONFIGS_AVR32DEV1_INCLUDE_BOARD_H
 
 /************************************************************************************
  * Included Files
@@ -174,7 +173,8 @@
 #undef EXTERN
 #if defined(__cplusplus)
 #define EXTERN extern "C"
-extern "C" {
+extern "C"
+{
 #else
 #define EXTERN extern
 #endif
@@ -192,60 +192,7 @@ extern "C" {
  *
  ************************************************************************************/
 
-EXTERN void avr32_boardinitialize(void);
+void avr32_boardinitialize(void);
-
-/************************************************************************************
- * Name: up_buttoninit
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
- *   that, up_buttons() may be called to collect the current state of all
- *   buttons or up_irqbutton() may be called to register button interrupt
- *   handlers.
- *
- * NOTE: Nothing in the "base" NuttX code calls up_buttoninit().  If you want button
- * support in an application, your application startup code must call up_buttoninit()
- * prior to calling any of the other button interfaces.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-
-/************************************************************************************
- * Name: up_buttons
- *
- * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
- *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
- *   associated with a button.  See the BUTTON* definitions above for the meaning of
- *   each bit in the returned value.
- *
- ************************************************************************************/
-
-EXTERN uint8_t up_buttons(void);
-
-/************************************************************************************
- * Name: up_irqbutton
- *
- * Description:
- *   This function may be called to register an interrupt handler that will be
- *   called when a button is depressed or released.  The ID value is one of the
- *   BUTTON* definitions provided above. The previous interrupt handler address is
- *   returned (so that it may restored, if so desired).
- *
- * Configuration Notes:
- *   Configuration CONFIG_AVR32_GPIOIRQ must be selected to enable the overall GPIO
- *   IRQ feature and CONFIG_AVR32_GPIOIRQSETA and/or CONFIG_AVR32_GPIOIRQSETB must
- *   be enabled to select GPIOs to support interrupts on.  For button support, bits
- *   2 and 3 must be set in CONFIG_AVR32_GPIOIRQSETB (PB2 and PB3).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_AVR32_GPIOIRQ
-EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif /* CONFIG_ARCH_BUTTONS */
 
 #undef EXTERN
 #if defined(__cplusplus)
@@ -253,5 +200,5 @@ EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
 #endif
 
 #endif /* __ASSEMBLY__ */
-#endif  /* __ARCH_BOARD_BOARD_H */
+#endif  /* __CONFIGS_AVR32DEV1_INCLUDE_BOARD_H */
 

configs/avr32dev1/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam3u-ek/src/up_leds.c
  *
- *   Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2010-2011, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -43,6 +43,7 @@
 #include <sys/types.h>
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -87,12 +88,12 @@ static xcpt_t up_irqbuttonx(int irq, xcpt_t irqhandler)
 
   if (irqhandler)
     {
-	  gpio_irqenable(irq);
+      gpio_irqenable(irq);
-	}
+    }
   else
     {
-	  gpio_irqdisable(irq);
+      gpio_irqdisable(irq);
-	}
+    }
 
   /* Return the old button handler (so that it can be restored) */
 
@@ -105,17 +106,17 @@ static xcpt_t up_irqbuttonx(int irq, xcpt_t irqhandler)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.
- *   that, up_buttons() may be called to collect the current state of all
+ *   After  that, up_buttons() may be called to collect the current state of
- *   buttons or up_irqbutton() may be called to register button interrupt
+ *   all  buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   (void)at32uc3_configgpio(PINMUX_GPIO_BUTTON1);
   (void)at32uc3_configgpio(PINMUX_GPIO_BUTTON2);
@@ -125,10 +126,11 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
+ *   called to collect the state of all buttons.  up_buttons() returns an
- *   with each bit associated with a button.  See the BUTTON* definitions
+ *   8-bit bit set with each bit associated with a button.  See the BUTTON*
- *   above for the meaning of each bit in the returned value.
+ *   definitions in the board.h header file for the meaning of each bit in
+ *   the returned value.
  *
  ****************************************************************************/
 

configs/cloudctrl/include/board.h

@@ -322,37 +322,6 @@ extern "C" {
 
 void stm32_boardinitialize(void);
 
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
- *   that, up_buttons() may be called to collect the current state of all
- *   buttons or up_irqbutton() may be called to register button interrupt
- *   handlers.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
- *   definitions in board.h for the meaning of each bit.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will
- *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
- *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
- *   value.  The previous interrupt handler address is returned (so that it may
- *   restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#ifdef CONFIG_ARCH_IRQBUTTONS
-EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif
-
 /************************************************************************************
  * Name:  stm32_ledinit, stm32_setled, and stm32_setleds
  *
@@ -364,9 +333,9 @@ EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
  ************************************************************************************/
 
 #ifndef CONFIG_ARCH_LEDS
-EXTERN void stm32_ledinit(void);
+void stm32_ledinit(void);
-EXTERN void stm32_setled(int led, bool ledon);
+void stm32_setled(int led, bool ledon);
-EXTERN void stm32_setleds(uint8_t ledset);
+void stm32_setleds(uint8_t ledset);
 #endif
 
 /************************************************************************************
@@ -380,7 +349,7 @@ EXTERN void stm32_setleds(uint8_t ledset);
  *
  ************************************************************************************/
 
-EXTERN void stm32_lcdclear(uint16_t color);
+void stm32_lcdclear(uint16_t color);
 
 /************************************************************************************
  * Relay control functions
@@ -393,17 +362,17 @@ EXTERN void stm32_lcdclear(uint16_t color);
  ************************************************************************************/
 
 #ifdef CONFIG_ARCH_RELAYS
-EXTERN void up_relaysinit(void);
+void up_relaysinit(void);
-EXTERN void relays_setstat(int relays, bool stat);
+void relays_setstat(int relays, bool stat);
-EXTERN bool relays_getstat(int relays);
+bool relays_getstat(int relays);
-EXTERN void relays_setstats(uint32_t relays_stat);
+void relays_setstats(uint32_t relays_stat);
-EXTERN uint32_t relays_getstats(void);
+uint32_t relays_getstats(void);
-EXTERN void relays_onoff(int relays, uint32_t mdelay);
+void relays_onoff(int relays, uint32_t mdelay);
-EXTERN void relays_onoffs(uint32_t relays_stat, uint32_t mdelay);
+void relays_onoffs(uint32_t relays_stat, uint32_t mdelay);
-EXTERN void relays_resetmode(int relays);
+void relays_resetmode(int relays);
-EXTERN void relays_powermode(int relays);
+void relays_powermode(int relays);
-EXTERN void relays_resetmodes(uint32_t relays_stat);
+void relays_resetmodes(uint32_t relays_stat);
-EXTERN void relays_powermodes(uint32_t relays_stat);
+void relays_powermodes(uint32_t relays_stat);
 #endif
 
 /************************************************************************************
@@ -414,8 +383,8 @@ EXTERN void relays_powermodes(uint32_t relays_stat);
  *
  ************************************************************************************/
 
-EXTERN const char *stm32_getchipid(void);
+const char *stm32_getchipid(void);
-EXTERN const char *stm32_getchipid_string(void);
+const char *stm32_getchipid_string(void);
 
 #undef EXTERN
 #if defined(__cplusplus)

configs/cloudctrl/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/cloudctrl/src/up_buttons.c
  *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *           Darcy Gong <darcy.gong@gmail.com>
  *
@@ -42,7 +42,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "cloudctrl-internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -72,17 +74,17 @@ static const uint16_t g_buttons[NUM_BUTTONS] =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.
- *   that, up_buttons() may be called to collect the current state of all
+ *   After  that, up_buttons() may be called to collect the current state of
- *   buttons or up_irqbutton() may be called to register button interrupt
+ *   all buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   int i;
 
@@ -130,28 +132,30 @@ uint8_t up_buttons(void)
   return ret;
 }
 
-/************************************************************************************
+/****************************************************************************
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.
- *   that, up_buttons() may be called to collect the current state of all
+ *   After  that, up_buttons() may be called to collect the current state of
- *   buttons or up_irqbutton() may be called to register button interrupt
+ *   all buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
+ *   called to  collect the state of all buttons.  up_buttons() returns an
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
+ *   8-bit bit set with each bit associated with a button.  See the
- *   definitions in board.h for the meaning of each bit.
+ *   BUTTON_*_BIT and JOYSTICK_*_BIT definitions in board.h for the meaning
+ *   of each bit.
  *
  *   up_irqbutton() may be called to register an interrupt handler that will
  *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
+ *   button enumeration value that uniquely identifies a button resource. See
- *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
+ *   the
- *   value.  The previous interrupt handler address is returned (so that it may
+ *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of
- *   restored, if so desired).
+ *   enumeration  value.  The previous interrupt handler address is returned
+ *   (so that it may restored, if so desired).
  *
- ************************************************************************************/
+ ****************************************************************************/
 
 #ifdef CONFIG_ARCH_IRQBUTTONS
 xcpt_t up_irqbutton(int id, xcpt_t irqhandler)

configs/demo9s12ne64/include/board.h

@@ -117,22 +117,7 @@ extern "C" {
  *
  ************************************************************************************/
 
-EXTERN void hcs12_boardinitialize(void);
+void hcs12_boardinitialize(void);
-
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the state of all buttons.  up_buttons()
- *   returns an bit set with bits corresponding to the state of each button.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#endif
 
 #undef EXTERN
 #if defined(__cplusplus)

configs/demo9s12ne64/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/demo9s12ne64/src/up_leds.c
  *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "demo9s12ne64.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -63,10 +65,10 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
 }
 

configs/ea3131/include/board.h

@@ -2,7 +2,7 @@
  * configs/ea3131/include/board.h
  * include/arch/board/board.h
  *
- *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2010, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -122,7 +122,8 @@
 #undef EXTERN
 #if defined(__cplusplus)
 #define EXTERN extern "C"
-extern "C" {
+extern "C"
+{
 #else
 #define EXTERN extern
 #endif
@@ -140,23 +141,7 @@ extern "C" {
  *
  ************************************************************************************/
 
-EXTERN void lpc31_boardinitialize(void);
+void lpc31_boardinitialize(void);
-
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the state of all buttons.  up_buttons()
- *   returns an 8-bit bit set with each bit associated with a button.  See the
- *   BUTTON_* definitions above for the meaning of each bit.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#endif
 
 #undef EXTERN
 #if defined(__cplusplus)

configs/ea3131/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/ea3131/src/up_leds.c
  *
- *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2010, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "ea3131_internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -63,10 +65,10 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
 }
 

configs/ea3152/include/board.h

@@ -140,23 +140,7 @@ extern "C" {
  *
  ************************************************************************************/
 
-EXTERN void lpc31_boardinitialize(void);
+void lpc31_boardinitialize(void);
-
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the state of all buttons.  up_buttons()
- *   returns an 8-bit bit set with each bit associated with a button.  See the
- *   BUTTON_* definitions above for the meaning of each bit.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#endif
 
 #undef EXTERN
 #if defined(__cplusplus)

configs/ea3152/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/ea3152/src/up_leds.c
  *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "ea3152_internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -63,10 +65,10 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
 }
 

configs/ez80f910200zco/include/board.h

@@ -80,11 +80,6 @@ extern "C" {
 #define EXTERN extern
 #endif
 
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#endif
-
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/ez80f910200zco/src/ez80_buttons.c

@@ -113,11 +113,11 @@ void up_pb2interrupt(void)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   uint8_t regval;
 

configs/fire-stm32v2/include/board.h

@@ -383,38 +383,7 @@ extern "C" {
  *
  ************************************************************************************/
 
-EXTERN void stm32_boardinitialize(void);
+void stm32_boardinitialize(void);
-
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
- *   that, up_buttons() may be called to collect the current state of all
- *   buttons or up_irqbutton() may be called to register button interrupt
- *   handlers.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
- *   definitions in board.h for the meaning of each bit.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will
- *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
- *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
- *   value.  The previous interrupt handler address is returned (so that it may
- *   restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#ifdef CONFIG_ARCH_IRQBUTTONS
-EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif
 
 /************************************************************************************
  * Name:  stm32_ledinit, stm32_setled, and stm32_setleds
@@ -427,9 +396,9 @@ EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
  ************************************************************************************/
 
 #ifndef CONFIG_ARCH_LEDS
-EXTERN void stm32_ledinit(void);
+void stm32_ledinit(void);
-EXTERN void stm32_setled(int led, bool ledon);
+void stm32_setled(int led, bool ledon);
-EXTERN void stm32_setleds(uint8_t ledset);
+void stm32_setleds(uint8_t ledset);
 #endif
 
 /************************************************************************************
@@ -444,7 +413,7 @@ EXTERN void stm32_setleds(uint8_t ledset);
  ************************************************************************************/
 
 #ifdef CONFIG_STM32_FSMC
-EXTERN void fire_lcdclear(uint16_t color);
+void fire_lcdclear(uint16_t color);
 #endif
 
 #endif /* __ASSEMBLY__ */

configs/fire-stm32v2/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/fire-stm32v2/src/up_buttons.c
  *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "fire-internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -63,17 +65,17 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.
- *   that, up_buttons() may be called to collect the current state of all
+ *   After that, up_buttons() may be called to collect the current state of
- *   buttons or up_irqbutton() may be called to register button interrupt
+ *   all buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   /* Configure the GPIO pins as inputs.  NOTE that EXTI interrupts are 
    * configured for some pins but NOT used in this file
@@ -106,28 +108,29 @@ uint8_t up_buttons(void)
   return ret;
 }
 
-/************************************************************************************
+/*****************************************************************************
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.
- *   that, up_buttons() may be called to collect the current state of all
+ *   After that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
+ *   called to collect the state of all buttons.  up_buttons() returns an
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
+ *   8-bit bit set with each bit associated with a button.  See the
- *   definitions in board.h for the meaning of each bit.
+ *   BUTTON_*_BIT and JOYSTICK_*_BIT definitions in board.h for the meaning
+ *   of each bit.
  *
  *   up_irqbutton() may be called to register an interrupt handler that will
  *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
+ *   button enumeration value that uniquely identifies a button resource. See
- *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
+ *   the BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of
- *   value.  The previous interrupt handler address is returned (so that it may
+ *   enumeration values.  The previous interrupt handler address is returned
- *   restored, if so desired).
+ *   (so that it may restored, if so desired).
  *
- ************************************************************************************/
+ ****************************************************************************/
 
 #ifdef CONFIG_ARCH_IRQBUTTONS
 xcpt_t up_irqbutton(int id, xcpt_t irqhandler)

configs/hymini-stm32v/include/board.h

@@ -202,38 +202,7 @@ extern "C" {
  *
  ************************************************************************************/
 
-EXTERN void stm32_boardinitialize(void);
+void stm32_boardinitialize(void);
-
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
- *   that, up_buttons() may be called to collect the current state of all
- *   buttons or up_irqbutton() may be called to register button interrupt
- *   handlers.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
- *   definitions in board.h for the meaning of each bit.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will
- *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
- *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
- *   value.  The previous interrupt handler address is returned (so that it may
- *   restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#ifdef CONFIG_ARCH_IRQBUTTONS
-EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif
 
 #undef EXTERN
 #if defined(__cplusplus)

configs/hymini-stm32v/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/hymini-stm32v/src/up_buttons.c
  *
- *   Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009, 2011, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "hymini_stm32v-internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -55,17 +57,17 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.
- *   that, up_buttons() may be called to collect the current state of all
+ *   After that, up_buttons() may be called to collect the current state of
- *   buttons or up_irqbutton() may be called to register button interrupt
+ *   all buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
   {
     stm32_configgpio(GPIO_BTN_KEYA);
     stm32_configgpio(GPIO_BTN_KEYB);
@@ -100,28 +102,29 @@ uint8_t up_buttons(void)
     return ret;
   }
 
-/************************************************************************************
+/****************************************************************************
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.
- *   that, up_buttons() may be called to collect the current state of all
+ *   After that, up_buttons() may be called to collect the current state of
- *   buttons or up_irqbutton() may be called to register button interrupt
+ *   all buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
+ *   called to collect the state of all buttons.  up_buttons() returns an
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
+ *   8-bit bit set with each bit associated with a button.  See the
- *   definitions in board.h for the meaning of each bit.
+ *   BUTTON_*_BIT and JOYSTICK_*_BIT definitions in board.h for the meaning
+ *  of each bit.
  *
  *   up_irqbutton() may be called to register an interrupt handler that will
  *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
+ *   button enumeration value that uniquely identifies a button resource. See
- *   BUTTON_* definitions in board.h for the meaning of enumeration
+ *   the BUTTON_* definitions in board.h for the meaning of enumeration
- *   value.  The previous interrupt handler address is returned (so that it may
+ *   value.  The previous interrupt handler address is returned (so that it
- *   restored, if so desired).
+ *    may be restored, if so desired).
  *
- ************************************************************************************/
+ ****************************************************************************/
 
 #ifdef CONFIG_ARCH_IRQBUTTONS
 xcpt_t up_irqbutton(int id, xcpt_t irqhandler)

configs/kwikstik-k40/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/kwikstik-k40/src/up_buttons.c
  *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "kwikstik-internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -63,17 +65,17 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.
- *   that, up_buttons() may be called to collect the current state of all
+ *   After that, up_buttons() may be called to collect the current state of
- *   buttons or up_irqbutton() may be called to register button interrupt
+ *   all buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   /* The KwikStik-K40 board has no standard GPIO contact buttons */
 }
@@ -89,28 +91,29 @@ uint8_t up_buttons(void)
   return 0;
 }
 
-/************************************************************************************
+/****************************************************************************
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.
- *   that, up_buttons() may be called to collect the current state of all
+ *   After that, up_buttons() may be called to collect the current state of
- *   buttons or up_irqbutton() may be called to register button interrupt
+ *   all buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
+ *   called to collect the state of all buttons.  up_buttons() returns an
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
+ *   8-bit bit set with each bit associated with a button.  See the
- *   definitions in board.h for the meaning of each bit.
+ *   BUTTON_*_BIT and JOYSTICK_*_BIT definitions in board.h for the meaning
+ *   of each bit.
  *
  *   up_irqbutton() may be called to register an interrupt handler that will
  *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
+ *   button enumeration value that uniquely identifies a button resource.
- *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
+ *   See the BUTTON_* and JOYSTICK_* definitions in board.h for the meaning
- *   value.  The previous interrupt handler address is returned (so that it may
+ *   of enumeration value.  The previous interrupt handler address is 
- *   restored, if so desired).
+ *   returned (so that it may be restored, if so desired).
  *
- ************************************************************************************/
+ ****************************************************************************/
 
 #ifdef CONFIG_ARCH_IRQBUTTONS
 xcpt_t up_irqbutton(int id, xcpt_t irqhandler)

configs/lincoln60/src/up_buttons.c

@@ -94,17 +94,17 @@ static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   int i;
 
@@ -120,7 +120,7 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons.
  *
@@ -160,7 +160,7 @@ uint8_t up_buttons(void)
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_irqbutton() may be called to register button interrupt handlers.
  *
  *   up_irqbutton() may be called to register an interrupt handler that will

configs/lm4f120-launchpad/include/board.h

@@ -1,8 +1,7 @@
 /************************************************************************************
  * configs/lm4f120-launchpad/include/board.h
- * include/arch/board/board.h
  *
- *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -34,8 +33,8 @@
  *
  ************************************************************************************/
 
-#ifndef __ARCH_BOARD_BOARD_H
+#ifndef __CONFIGS_LM4F120_LAUNCHPAD_INCLUDE_BOARD_H
-#define __ARCH_BOARD_BOARD_H
+#define __CONFIGS_LM4F120_LAUNCHPAD_INCLUDE_BOARD_H
 
 /************************************************************************************
  * Included Files
@@ -219,60 +218,5 @@ void lm4f_setled(int led, bool ledon);
 void lm4f_setleds(uint8_t ledset);
 #endif
 
-/************************************************************************************
- * Name: up_buttoninit
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons or
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void);
-
-/************************************************************************************
- * Name: up_buttons
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
- *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
- *   associated with a button.  See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT
- *   definitions above for the meaning of each bit.
- *
- ************************************************************************************/
-
-uint8_t up_buttons(void);
-
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will be called
- *   when a button is depressed or released.  The ID value is a button enumeration
- *   value that uniquely identifies a button resource. See the BOARD_BUTTON_* and
- *   BOARD_JOYSTICK_* definitions in above for the meaning of enumeration values
- *   The previous interrupt handler address is returned (so that it may restored, if
- *   so desired).
- *
- *   Note that up_irqbutton() also enables button interrupts.  Button interrupts
- *   will remain enabled after the interrupt handler is attached. Interrupts may
- *   be disabled (and detached) by calling up_irqbutton with irqhandler equal to
- *   NULL.
- *
- ************************************************************************************/
-
-#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
-xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif /* CONFIG_ARCH_BUTTONS */
-
 #endif /* __ASSEMBLY__ */
-#endif  /* __ARCH_BOARD_BOARD_H */
+#endif  /* __CONFIGS_LM4F120_LAUNCHPAD_INCLUDE_BOARD_H */

configs/lpc4330-xplorer/src/up_buttons.c

@@ -93,17 +93,17 @@ static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   int i;
 
@@ -119,7 +119,7 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons.
  *
@@ -159,7 +159,7 @@ uint8_t up_buttons(void)
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_irqbutton() may be called to register button interrupt handlers.
  *
  *   up_irqbutton() may be called to register an interrupt handler that will

configs/mikroe-stm32f4/include/board.h

@@ -297,37 +297,6 @@ void stm32_setled(int led, bool ledon);
 void stm32_setleds(uint8_t ledset);
 #endif
 
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
- *   that, up_buttons() may be called to collect the current state of all
- *   buttons or up_irqbutton() may be called to register button interrupt
- *   handlers.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
- *   with each bit associated with a button.  See the BUTTON_*_BIT
- *   definitions in board.h for the meaning of each bit.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will
- *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
- *   BUTTON_* definitions in board.h for the meaning of enumeration
- *   value.  The previous interrupt handler address is returned (so that it may
- *   restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void);
-uint8_t up_buttons(void);
-#ifdef CONFIG_ARCH_IRQBUTTONS
-xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif
-
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/ne64badge/include/board.h

@@ -125,22 +125,7 @@ extern "C" {
  *
  ************************************************************************************/
 
-EXTERN void hcs12_boardinitialize(void);
+void hcs12_boardinitialize(void);
-
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the state of all buttons.  up_buttons()
- *   returns an bit set with bits corresponding to the state of each button.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#endif
 
 #undef EXTERN
 #if defined(__cplusplus)

configs/ne64badge/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/ne64badge/src/up_buttons.c
  *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "ne64badge_internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -91,19 +93,19 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   /* Configure all button GPIO lines */
 
-  btn_dumpgpio("up_buttoninit() Entry)");
+  btn_dumpgpio("board_button_initialize() Entry)");
 
   hcs12_configgpio(NE64BADGE_BUTTON1);
   hcs12_configgpio(NE64BADGE_BUTTON2);
 
-  btn_dumpgpio("up_buttoninit() Exit");
+  btn_dumpgpio("board_button_initialize() Exit");
 }
 
 /****************************************************************************

configs/olimex-lpc1766stk/include/board.h

@@ -398,61 +398,6 @@ EXTERN void lpc17_setled(int led, bool ledon);
 EXTERN void lpc17_setleds(uint8_t ledset);
 #endif
 
-/************************************************************************************
- * Name: up_buttoninit
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons or
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-
-/************************************************************************************
- * Name: up_buttons
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
- *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
- *   associated with a button.  See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT
- *   definitions above for the meaning of each bit.
- *
- ************************************************************************************/
-
-EXTERN uint8_t up_buttons(void);
-
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will be called
- *   when a button is depressed or released.  The ID value is a button enumeration
- *   value that uniquely identifies a button resource. See the BOARD_BUTTON_* and
- *   BOARD_JOYSTICK_* definitions in above for the meaning of enumeration values
- *   The previous interrupt handler address is returned (so that it may restored, if
- *   so desired).
- *
- *   Note that up_irqbutton() also enables button interrupts.  Button interrupts
- *   will remain enabled after the interrupt handler is attached. Interrupts may
- *   be disabled (and detached) by calling up_irqbutton with irqhandler equal to
- *   NULL.
- *
- ************************************************************************************/
-
-#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
-EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif /* CONFIG_ARCH_BUTTONS */
-
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/olimex-lpc1766stk/src/up_buttons.c

@@ -97,17 +97,17 @@ static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   int i;
 
@@ -123,7 +123,7 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons.
  *
@@ -163,7 +163,7 @@ uint8_t up_buttons(void)
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_irqbutton() may be called to register button interrupt handlers.
  *
  *   up_irqbutton() may be called to register an interrupt handler that will

configs/olimex-stm32-p207/src/up_boot.c

@@ -90,7 +90,7 @@ void stm32_boardinitialize(void)
   /* Configure on-board BUTTONs if BUTTON support has been selected. */
 
 #ifdef CONFIG_ARCH_BUTTONS
-  up_buttoninit();
+  board_button_initialize();
 #endif
 }
 

configs/olimex-stm32-p207/src/up_buttons.c

@@ -40,7 +40,10 @@
 #include <nuttx/config.h>
 
 #include <stdint.h>
+
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "olimex-stm32-p207.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -77,17 +80,17 @@ static const uint16_t g_buttons[NUM_BUTTONS] =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   int i;
 
@@ -153,12 +156,12 @@ uint8_t up_buttons(void)
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be called to
  *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
  *   with each bit associated with a button.  See the BUTTON_*_BIT
  *   definitions in board.h for the meaning of each bit.

configs/olimex-strp711/include/board.h

@@ -171,11 +171,6 @@ extern "C" {
  * Public Functions
  ****************************************************************************/
 
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#endif
-
 #undef EXTERN
 #ifdef __cplusplus
 }

configs/olimex-strp711/src/up_buttons.c

@@ -72,11 +72,11 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   uint16_t reg16;
 

configs/open1788/include/board.h

@@ -483,61 +483,6 @@ EXTERN void lpc17_setled(int led, bool ledon);
 EXTERN void lpc17_setleds(uint8_t ledset);
 #endif
 
-/************************************************************************************
- * Name: up_buttoninit
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons or
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-
-/************************************************************************************
- * Name: up_buttons
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
- *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
- *   associated with a button.  See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT
- *   definitions above for the meaning of each bit.
- *
- ************************************************************************************/
-
-EXTERN uint8_t up_buttons(void);
-
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will be called
- *   when a button is depressed or released.  The ID value is a button enumeration
- *   value that uniquely identifies a button resource. See the BOARD_BUTTON_* and
- *   BOARD_JOYSTICK_* definitions in above for the meaning of enumeration values
- *   The previous interrupt handler address is returned (so that it may restored, if
- *   so desired).
- *
- *   Note that up_irqbutton() also enables button interrupts.  Button interrupts
- *   will remain enabled after the interrupt handler is attached. Interrupts may
- *   be disabled (and detached) by calling up_irqbutton with irqhandler equal to
- *   NULL.
- *
- ************************************************************************************/
-
-#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
-EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif /* CONFIG_ARCH_BUTTONS */
-
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/open1788/src/lpc17_buttons.c

@@ -115,17 +115,17 @@ static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   int i;
 
@@ -141,7 +141,7 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons.
  *
@@ -181,7 +181,7 @@ uint8_t up_buttons(void)
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_irqbutton() may be called to register button interrupt handlers.
  *
  *   up_irqbutton() may be called to register an interrupt handler that will

configs/pcduino-a10/include/board.h

@@ -201,48 +201,6 @@ void a1x_setled(int led, bool ledon);
 void a1x_setleds(uint8_t ledset);
 #endif
 
-/************************************************************************************
- * Name: up_buttoninit
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons or
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void);
-
-/************************************************************************************
- * Name: up_buttons
- *
- * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
- *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
- *   associated with a button.  See the BUTTON* definitions above for the meaning of
- *   each bit in the returned value.
- *
- ************************************************************************************/
-
-uint8_t up_buttons(void);
-
-/************************************************************************************
- * Name: up_irqbutton
- *
- * Description:
- *   This function may be called to register an interrupt handler that will be
- *   called when a button is depressed or released.  The ID value is one of the
- *   BUTTON* definitions provided above. The previous interrupt handler address is
- *   returned (so that it may restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_A1X_PIO_IRQ
-xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif /* CONFIG_ARCH_BUTTONS */
-
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/pcduino-a10/src/a1x_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/pcduino-a10/src/a1x_buttons.c
  *
- *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,6 +41,7 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -71,17 +72,17 @@ static xcpt_t g_irqbutton[BOARD_NBUTTONS];
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
 # warning Missing logic
 }
@@ -90,7 +91,7 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be called to
  *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
  *   with each bit associated with a button.  See the BUTTON* definitions
  *   above for the meaning of each bit in the returned value.

configs/sam3u-ek/include/board.h

@@ -185,48 +185,6 @@ extern "C" {
 
 void sam_boardinitialize(void);
 
-/************************************************************************************
- * Name: up_buttoninit
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons or
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void);
-
-/************************************************************************************
- * Name: up_buttons
- *
- * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
- *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
- *   associated with a button.  See the BUTTON* definitions above for the meaning of
- *   each bit in the returned value.
- *
- ************************************************************************************/
-
-uint8_t up_buttons(void);
-
-/************************************************************************************
- * Name: up_irqbutton
- *
- * Description:
- *   This function may be called to register an interrupt handler that will be
- *   called when a button is depressed or released.  The ID value is one of the
- *   BUTTON* definitions provided above. The previous interrupt handler address is
- *   returned (so that it may restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_GPIOA_IRQ
-xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif /* CONFIG_ARCH_BUTTONS */
-
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/sam3u-ek/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam3u-ek/src/up_leds.c
  *
- *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2010, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,6 +41,7 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -111,17 +112,17 @@ static xcpt_t up_irqbuttonx(int irq, xcpt_t irqhandler, xcpt_t *store)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   (void)sam_configgpio(GPIO_BUTTON1);
   (void)sam_configgpio(GPIO_BUTTON2);
@@ -131,7 +132,7 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
+ *   After board_button_initialize() has been called, up_buttons() may be called to collect
  *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
  *   associated with a button.  See the BUTTON* definitions above for the meaning of
  *   each bit in the returned value.

configs/sam4l-xplained/include/board.h

@@ -332,48 +332,6 @@ void sam_setled(int led, bool ledon);
 void sam_setleds(uint8_t ledset);
 #endif
 
-/************************************************************************************
- * Name: up_buttoninit
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons or
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void);
-
-/************************************************************************************
- * Name: up_buttons
- *
- * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
- *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
- *   associated with a button.  See the BUTTON* definitions above for the meaning of
- *   each bit in the returned value.
- *
- ************************************************************************************/
-
-uint8_t up_buttons(void);
-
-/************************************************************************************
- * Name: up_irqbutton
- *
- * Description:
- *   This function may be called to register an interrupt handler that will be
- *   called when a button is depressed or released.  The ID value is one of the
- *   BUTTON* definitions provided above. The previous interrupt handler address is
- *   returned (so that it may restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_GPIOA_IRQ
-xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif /* CONFIG_ARCH_BUTTONS */
-
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/sam4l-xplained/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam4l-xplained/src/sam_buttons.c
  *
- *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,6 +41,7 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -72,17 +73,17 @@ static xcpt_t g_irqsw0;
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   (void)sam_configgpio(GPIO_SW0);
 }
@@ -91,7 +92,7 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
+ *   After board_button_initialize() has been called, up_buttons() may be called to collect
  *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
  *   associated with a button.  See the BUTTON* definitions above for the meaning of
  *   each bit in the returned value.

configs/sam4s-xplained/include/board.h

@@ -272,48 +272,6 @@ void sam_setled(int led, bool ledon);
 void sam_setleds(uint8_t ledset);
 #endif
 
-/************************************************************************************
- * Name: up_buttoninit
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons or
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void);
-
-/************************************************************************************
- * Name: up_buttons
- *
- * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
- *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
- *   associated with a button.  See the BUTTON* definitions above for the meaning of
- *   each bit in the returned value.
- *
- ************************************************************************************/
-
-uint8_t up_buttons(void);
-
-/************************************************************************************
- * Name: up_irqbutton
- *
- * Description:
- *   This function may be called to register an interrupt handler that will be
- *   called when a button is depressed or released.  The ID value is one of the
- *   BUTTON* definitions provided above. The previous interrupt handler address is
- *   returned (so that it may restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_GPIOA_IRQ
-xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif /* CONFIG_ARCH_BUTTONS */
-
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/sam4s-xplained/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam4s-xplained/src/sam_buttons.c
  *
- *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,6 +41,7 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -70,17 +71,17 @@ static xcpt_t g_irqbp2;
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   (void)sam_configgpio(GPIO_BP2);
 }
@@ -89,7 +90,7 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
+ *   After board_button_initialize() has been called, up_buttons() may be called to collect
  *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
  *   associated with a button.  See the BUTTON* definitions above for the meaning of
  *   each bit in the returned value.

configs/sama5d3x-ek/include/board.h

@@ -364,48 +364,6 @@ void sam_setled(int led, bool ledon);
 void sam_setleds(uint8_t ledset);
 #endif
 
-/************************************************************************************
- * Name: up_buttoninit
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After that,
- *   up_buttons() may be called to collect the current state of all buttons or
- *   up_irqbutton() may be called to register button interrupt handlers.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void);
-
-/************************************************************************************
- * Name: up_buttons
- *
- * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to collect
- *   the state of all buttons.  up_buttons() returns an 8-bit bit set with each bit
- *   associated with a button.  See the BUTTON* definitions above for the meaning of
- *   each bit in the returned value.
- *
- ************************************************************************************/
-
-uint8_t up_buttons(void);
-
-/************************************************************************************
- * Name: up_irqbutton
- *
- * Description:
- *   This function may be called to register an interrupt handler that will be
- *   called when a button is depressed or released.  The ID value is one of the
- *   BUTTON* definitions provided above. The previous interrupt handler address is
- *   returned (so that it may restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_SAMA5_PIOE_IRQ
-xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif /* CONFIG_ARCH_BUTTONS */
-
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/sama5d3x-ek/src/sam_buttons.c

@@ -56,6 +56,7 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -87,17 +88,17 @@ static xcpt_t g_irquser1;
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   (void)sam_configpio(PIO_USER1);
 }
@@ -106,7 +107,7 @@ void up_buttoninit(void)
  * Name: up_buttons
  *
  * Description:
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be called to
  *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
  *   with each bit associated with a button.  See the BUTTON* definitions
  *   above for the meaning of each bit in the returned value.

configs/shenzhou/include/board.h

@@ -368,37 +368,6 @@ extern "C" {
 
 void stm32_boardinitialize(void);
 
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
- *   that, up_buttons() may be called to collect the current state of all
- *   buttons or up_irqbutton() may be called to register button interrupt
- *   handlers.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
- *   definitions in board.h for the meaning of each bit.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will
- *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
- *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
- *   value.  The previous interrupt handler address is returned (so that it may
- *   restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#ifdef CONFIG_ARCH_IRQBUTTONS
-EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif
-
 /************************************************************************************
  * Name:  stm32_ledinit, stm32_setled, and stm32_setleds
  *
@@ -410,9 +379,9 @@ EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
  ************************************************************************************/
 
 #ifndef CONFIG_ARCH_LEDS
-EXTERN void stm32_ledinit(void);
+void stm32_ledinit(void);
-EXTERN void stm32_setled(int led, bool ledon);
+void stm32_setled(int led, bool ledon);
-EXTERN void stm32_setleds(uint8_t ledset);
+void stm32_setleds(uint8_t ledset);
 #endif
 
 /************************************************************************************
@@ -426,7 +395,7 @@ EXTERN void stm32_setleds(uint8_t ledset);
  *
  ************************************************************************************/
 
-EXTERN void stm32_lcdclear(uint16_t color);
+void stm32_lcdclear(uint16_t color);
 
 /************************************************************************************
  * Relay control functions
@@ -439,17 +408,17 @@ EXTERN void stm32_lcdclear(uint16_t color);
  ************************************************************************************/
 
 #ifdef CONFIG_ARCH_RELAYS
-EXTERN void up_relaysinit(void);
+void up_relaysinit(void);
-EXTERN void relays_setstat(int relays, bool stat);
+void relays_setstat(int relays, bool stat);
-EXTERN bool relays_getstat(int relays);
+bool relays_getstat(int relays);
-EXTERN void relays_setstats(uint32_t relays_stat);
+void relays_setstats(uint32_t relays_stat);
-EXTERN uint32_t relays_getstats(void);
+uint32_t relays_getstats(void);
-EXTERN void relays_onoff(int relays, uint32_t mdelay);
+void relays_onoff(int relays, uint32_t mdelay);
-EXTERN void relays_onoffs(uint32_t relays_stat, uint32_t mdelay);
+void relays_onoffs(uint32_t relays_stat, uint32_t mdelay);
-EXTERN void relays_resetmode(int relays);
+void relays_resetmode(int relays);
-EXTERN void relays_powermode(int relays);
+void relays_powermode(int relays);
-EXTERN void relays_resetmodes(uint32_t relays_stat);
+void relays_resetmodes(uint32_t relays_stat);
-EXTERN void relays_powermodes(uint32_t relays_stat);
+void relays_powermodes(uint32_t relays_stat);
 #endif
 
 /************************************************************************************
@@ -460,8 +429,8 @@ EXTERN void relays_powermodes(uint32_t relays_stat);
  *
  ************************************************************************************/
 
-EXTERN const char *stm32_getchipid(void);
+const char *stm32_getchipid(void);
-EXTERN const char *stm32_getchipid_string(void);
+const char *stm32_getchipid_string(void);
 
 #undef EXTERN
 #if defined(__cplusplus)

configs/shenzhou/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/shenzhou/src/up_buttons.c
  *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "shenzhou-internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -71,17 +73,17 @@ static const uint16_t g_buttons[NUM_BUTTONS] =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   int i;
 
@@ -133,12 +135,12 @@ uint8_t up_buttons(void)
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be called to
  *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
  *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
  *   definitions in board.h for the meaning of each bit.

configs/skp16c26/src/up_buttons.c

@@ -69,11 +69,11 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   uint8_t regval;
 

configs/spark/include/board.h

@@ -221,36 +221,6 @@ extern "C"
 /************************************************************************************
  * Public Function Prototypes
  ************************************************************************************/
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
- *   that, up_buttons() may be called to collect the current state of all
- *   buttons or up_irqbutton() may be called to register button interrupt
- *   handlers.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
- *   definitions in board.h for the meaning of each bit.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will
- *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
- *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
- *   value.  The previous interrupt handler address is returned (so that it may
- *   restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-void up_buttoninit(void);
-uint8_t up_buttons(void);
-#ifdef CONFIG_ARCH_IRQBUTTONS
-xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif
 
 /************************************************************************************
  * Name:  up_ledinit, up_setled, and up_setleds

configs/spark/src/up_boot.c

@@ -78,7 +78,7 @@ void stm32_boardinitialize(void)
 #endif
 
 #ifdef CONFIG_ARCH_HAVE_BUTTONS
-  up_buttoninit();
+  board_button_initialize();
 #endif
 
   /* Configure SPI chip selects if 1) SP2 is not disabled, and 2) the weak function

configs/spark/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/spark/src/up_buttons.c
  *
- *   Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "spark.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -63,17 +65,17 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   /* Configure the GPIO pins as inputs.  NOTE that EXTI interrupts are 
    * configured for all pins.
@@ -97,12 +99,12 @@ uint8_t up_buttons(void)
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be called to
  *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
  *   with each bit associated with a button.  See the BUTTON_*_BIT
  *   definitions in board.h for the meaning of each bit.

configs/stm3210e-eval/include/board.h

@@ -232,37 +232,6 @@ extern "C" {
 
 EXTERN void stm32_boardinitialize(void);
 
-/************************************************************************************
- * Button support.
- *
- * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
- *   that, up_buttons() may be called to collect the current state of all
- *   buttons or up_irqbutton() may be called to register button interrupt
- *   handlers.
- *
- *   After up_buttoninit() has been called, up_buttons() may be called to
- *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
- *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
- *   definitions in board.h for the meaning of each bit.
- *
- *   up_irqbutton() may be called to register an interrupt handler that will
- *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource. See the
- *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
- *   value.  The previous interrupt handler address is returned (so that it may
- *   restored, if so desired).
- *
- ************************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-EXTERN void up_buttoninit(void);
-EXTERN uint8_t up_buttons(void);
-#ifdef CONFIG_ARCH_IRQBUTTONS
-EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
-#endif
-#endif
-
 /************************************************************************************
  * Name:  stm3210e_lcdclear
  *

configs/stm3210e-eval/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm3210e-eval/src/up_buttons.c
  *
- *   Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009, 2011, 2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,9 @@
 
 #include <stdint.h>
 
+#include <nuttx/arch.h>
 #include <arch/board/board.h>
+
 #include "stm3210e-internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -72,17 +74,17 @@ static const uint16_t g_buttons[NUM_BUTTONS] =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_buttoninit
+ * Name: board_button_initialize
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
  ****************************************************************************/
 
-void up_buttoninit(void)
+void board_button_initialize(void)
 {
   int i;
 
@@ -134,12 +136,12 @@ uint8_t up_buttons(void)
  * Button support.
  *
  * Description:
- *   up_buttoninit() must be called to initialize button resources.  After
+ *   board_button_initialize() must be called to initialize button resources.  After
  *   that, up_buttons() may be called to collect the current state of all
  *   buttons or up_irqbutton() may be called to register button interrupt
  *   handlers.
  *
- *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   After board_button_initialize() has been called, up_buttons() may be called to
  *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
  *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
  *   definitions in board.h for the meaning of each bit.

configs/stm3210e-eval/src/up_pmbuttons.c

@@ -298,7 +298,7 @@ void up_pmbuttons(void)
 {
   /* Initialize the button GPIOs */
 
-  up_buttoninit();
+  board_button_initialize();
 
 #ifdef CONFIG_ARCH_IRQBUTTONS
   int i;